Evaluation of 72Se/72As generator and production of 72Se for supplying 72As as a potential PET imaging radionuclide.

Positron-emitting 72As is the PET imaging counterpart for beta-emitting 77As. Its parent, no carrier added (n.c.a.) 72Se, was produced for a 72Se/72As generator by irradiating an enriched 7°Ge metal-graphite target via the 70Ge(α, 2 n)72Se reaction. Target dissolution used a fast, environmentally friendly method with 93% radioactivity recovery. Chromatographic parameters of the 72Se/72As generator were evaluated, the eluted n.c.a. 72As was characterized with a phantom imaging study, and the previously reported trithiol and aryl-dithiol ligand systems were radiolabeled with the separated n.c.a. 72As in high yield.

Measured bremsstrahlung photonuclear production of 99Mo ((99m)Tc) with 34 MeV to 1.7 GeV electrons.

(99)Mo photonuclear yield was measured using high-energy electrons from Laser Plasma Accelerators and natural molybdenum. Spectroscopically resolved electron beams allow comparisons to Monte Carlo calculations using known (100)Mo(γ,n)(99)Mo cross sections. Yields are consistent with published low-energy data, and higher energy data are well predicted from the calculations. The measured yield is (15±2)×10(-5) atoms/electron (0.92±0.11 GBq/µA) for 25 mm targets at 33.7 MeV, rising to (1391±20)×10(-5) atoms/electron (87±2 GBq/µA) for 54 mm/ 1.7 GeV, with peak power-normalized yield at 150 MeV.

The excitation functions of (100)Mo(p,x)(99)Mo and (100)Mo(p,2n)(99m)Tc.

Proton-induced nuclear reactions for generation of (99)Mo and (99m)Tc radionuclides were investigated using the stacked-foil activation technique on 99.05% enriched (100)Mo targets at energies up to Ep=21MeV. Excitation functions of the reactions (100)Mo(p,x)(99)Mo and (100)Mo(p,2n)(99m)Tc have been measured.

Nuclear model analysis of excitation functions of proton and deuteron induced reactions on (64)Zn and (3)He- and α-particle induced reactions on (59)Co leading to the formation of copper-61: Comparison of major production routes.

Cross section data for formation of the medically important radionuclide (61)Cu (T½=3.33h) in proton and deuteron induced reactions on enriched (64)Zn and in (3)He- and α-particle induced reactions on (59)Co were analyzed by using the nuclear model calculational codes, EMPIRE and TALYS. A well-defined statistical procedure was then employed to derive the recommended excitation functions, and therefrom to obtain integral yields. A comparison of major production routes of (61)Cu was done.

Study on detecting spatial distribution of neutrons and gamma rays using a multi-imaging plate system.

In order to measure the spatial distributions of neutrons and gamma rays separately using the imaging plate, the requirement for the converter to enhance specific component was investigated with the PHITS code. Consequently, enhancing fast neutrons using recoil protons from epoxy resin was not effective due to high sensitivity of the imaging plate to gamma rays. However, the converter of epoxy resin doped with (10)B was found to have potential for thermal and epithermal neutrons, and graphite for gamma rays.

High-power electron beam tests of a liquid-lithium target and characterization study of (7)Li(p,n) near-threshold neutrons for accelerator-based boron neutron capture therapy.

A compact Liquid-Lithium Target (LiLiT) was built and tested with a high-power electron gun at Soreq Nuclear Research Center (SNRC). The target is intended to demonstrate liquid-lithium target capabilities to constitute an accelerator-based intense neutron source for Boron Neutron Capture Therapy (BNCT) in hospitals. The lithium target will produce neutrons through the (7)Li(p,n)(7)Be reaction and it will overcome the major problem of removing the thermal power >5kW generated by high-intensity proton beams, necessary for sufficient therapeutic neutron flux. In preliminary experiments liquid lithium was flown through the target loop and generated a stable jet on the concave supporting wall. Electron beam irradiation demonstrated that the liquid-lithium target can dissipate electron power densities of more than 4kW/cm(2) and volumetric power density around 2MW/cm(3) at a lithium flow of ~4m/s, while maintaining stable temperature and vacuum conditions. These power densities correspond to a narrow (σ=~2mm) 1.91MeV, 3mA proton beam. A high-intensity proton beam irradiation (1.91-2.5MeV, 2mA) is being commissioned at the SARAF (Soreq Applied Research Accelerator Facility) superconducting linear accelerator. In order to determine the conditions of LiLiT proton irradiation for BNCT and to tailor the neutron energy spectrum, a characterization of near threshold (~1.91MeV) (7)Li(p,n) neutrons is in progress based on Monte-Carlo (MCNP and Geant4) simulation and on low-intensity experiments with solid LiF targets. In-phantom dosimetry measurements are performed using special designed dosimeters based on CR-39 track detectors.

Revisiting the (7)Li(p,n)(7)Be reaction near threshold.

In this work we review all the available experimental neutron data for the (7)Li(p,n) reaction near threshold which is necessary to obtain an accurate source model for Monte Carlo simulations in Boron Neutron Capture Therapy. Scattered published experimental results such as cross sections, differential neutron yields and total yields were collected and analyzed, exploring the sensitivity of the fitting parameters to the different possible variables and deriving a consistent working set of parameters to evaluate the neutron source near threshold.

Production of medical radioisotopes with linear accelerators.

In this study, we discuss producing radioisotopes using linear electron accelerators and address production and separation issues of photoneutron (γ,n) and photoproton (γ,p) reactions. While (γ,n) reactions typically result in greater yields, separating product nuclides from the target is challenging since the chemical properties of both are the same. Yields of (γ,p) reactions are typically lower than (γ,n) ones, however they have the advantage that target and product nuclides belong to different chemical species so their separation is often not such an intricate problem. In this paper we consider two examples, (100)Mo(γ,n)(99)Mo and (68)Zn(γ,p)(67)Cu, of photonuclear reactions. Monte-Carlo simulations of the yields are benchmarked with experimental data obtained at the Idaho Accelerator Center using a 44MeV linear electron accelerator. We propose using a kinematic recoil method for photoneutron production. This technique requires (100)Mo target material to be in the form of nanoparticles coated with a catcher material. During irradiation, (99)Mo atoms recoil and get trapped in the coating layer. After irradiation, the coating is dissolved and (99)Mo is collected. At the same time, (100)Mo nanoparticles can be reused. For the photoproduction method, (67)Cu can be separated from the target nuclides, (68)Zn, using standard exchange chromatography methods. Monte-Carlo simulations were performed and the (99)Mo activity was predicted to be about 7MBq/(g(⁎)kW(⁎)h) while (67)Cu activity was predicted to be about 1MBq/(g(⁎)kW(⁎)h). Experimental data confirm the predicted activity for both cases which proves that photonuclear reactions can be used to produce radioisotopes. Lists of medical isotopes which might be obtained using photonuclear reactions have been compiled and are included as well.

Beam shaping assembly optimization for (7)Li(p,n)(7)Be accelerator based BNCT.

Within the framework of accelerator-based BNCT, a project to develop a folded Tandem-ElectroStatic-Quadrupole accelerator is under way at the Atomic Energy Commission of Argentina. The proposed accelerator is conceived to deliver a proton beam of 30mA at about 2.5MeV. In this work we explore a Beam Shaping Assembly (BSA) design based on the (7)Li(p,n)(7)Be neutron production reaction to obtain neutron beams to treat deep seated tumors.

The consistency of the data for neutron fission averaged cross-sections of threshold reactions: a study on the cross-section of 46Ti(n,p)46Sc, 47Ti(n,p)47Sc, 48Ti(n,p)48Sc and 64Zn(n,p)64Cu reactions.

The consistency of the published values for fission averaged cross-sections of threshold reactions induced in a nuclear reactor is analyzed. The influence of the literature data involved in the determination of these cross-sections is discussed. Renormalizations based on cross-sections value for the standard reactions, isotopic abundances of the precursors and radiation emission probabilities of the radionuclide under study and the monitor, are applied to the evaluation of the cross-sections for the reactions: (46)Ti(n,p)(46)Sc; (47)Ti(n,p)(47)Sc; (48)Ti(n,p)(48)Sc; and (64)Zn(n,p)(64)Cu.

Characterization of a 6Li-loaded liquid organic scintillator for fast neutron spectrometry and thermal neutron detection.

The characterization of a liquid scintillator incorporating an aqueous solution of enriched lithium chloride to produce a scintillator with 0.40% (6)Li is presented, including the performance of the scintillator in terms of its optical properties and neutron response. The scintillator was incorporated into a fast neutron spectrometer, and the light output spectra from 2.5 MeV, 14.1 MeV, and (252)Cf neutrons were measured using capture-gated coincidence techniques. The spectrometer was operated without coincidence to perform thermal neutron measurements. Possible improvements in spectrometer performance are discussed.

Anomalous isotopic effect on electron-directed reactivity by a 3-µm midinfrared pulse.

We have theoretically studied the effect of nuclear mass on electron localization in dissociating H2⁺ and its isotopes subjected to a few-cycle 3-µm pulse. Our results reveal an anomalous isotopic effect in which the degree of electron-directed reactivity can be even higher for heavier isotopes in the intense midinfrared field. We show, for the first time, the pronounced electron localization can be established through the interferences among the multi-photon coupling channels. Due to the relative enhancement of higher-order coupling channels with growing mass, the interference maxima at different kinetic energy of the spectra gradually become in phase, ultimately resulting in the larger dissociation asymmetries of heavier isotopes.

Theoretical calculations of the reaction cross-sections for proton-induced reactions on natural copper using ALICE-IPPE code.

A theoretical study of the nuclear-reaction cross sections for proton-induced reactions on (63)Cu and (65)Cu was performed in the proton energy range from threshold values up to 50MeV. The produced nuclei were different isotopes of Zn, Cu, Ni, Co and Mn, some of which have important applications. The reaction cross-section calculations were performed using the ALICE-IPPE code, which depends on the pre-equilibrium compound nucleus model. This code is suitable for the studied energy and isotopic mass ranges. Approximately 14 excitation functions for the different reactions have been constructed from the calculated cross-section values. The excitation function curves for the proton reactions with natural copper targets have been constructed from those for enriched targets using the natural abundance of the copper isotopes. Comparisons between the calculated excitation functions with those previously experimentally measured are given whenever the experimental values were available. Some statistical parameters were introduced to control the quality of the fitting between both the experimental and the theoretical calculated cross-section values.

Evaluation of excitation functions of proton and deuteron induced reactions on enriched tellurium isotopes with special relevance to the production of iodine-124.

Cross-section data for the production of medically important radionuclide (124)I via five proton and deuteron induced reactions on enriched tellurium isotopes were evaluated. The nuclear model codes, STAPRE, EMPIRE and TALYS, were used for consistency checks of the experimental data. Recommended excitation functions were derived using a well-defined statistical procedure. Therefrom integral yields were calculated. The various production routes of (124)I were compared. Presently the (124)Te(p,n)(124)I reaction is the method of choice; however, the (125)Te(p,2n)(124)I reaction also appears to have great potential.

Experimental study of the excitation functions of proton induced nuclear reactions on (167)Er for production of medically relevant (167)Tm.

(167)Tm (T(1/2)=9.25d) is a candidate radioisotope for medical therapy and diagnostics due to its Auger-electron and low-energy X- and gamma-ray emission. Excitation functions of the (167)Er(p,n)(167)Tm reaction and (168)Er(p,n)(168)Tm, (167)Er(p,2n)(166)Tm, (166)Er(p,2n)(165)Tm disturbing reactions were measured up to 15MeV by using the stacked foil irradiation technique and gamma-ray spectroscopy. The measured excitation functions agree well with the results of ALICE-IPPE, EMPIRE-II and TALYS nuclear reaction model codes. The thick target yield of (167)Tm in the 15-8MeV energy range is 6.9MBq/microAh. A short comparison of charged particle production routes of (167)Tm is given.

Cross sections for (n, 2n), (n, p) and (n, ) reactions on osmium isotopes in the neutron energy range of 13.5-14.8 MeV.

Cross sections for (n, 2n), (n, p) and (n, alpha) reactions on the osmium isotopes were measured in the neutron energies 13.5-14.8 MeV by the activation technique with the monitor reaction (93)Nb(n, 2n)(92 m)Nb. Our measurements were carried out by gamma-detection using a coaxial high-purity germanium (HPGe) detector. Natural high-purity osmium powder (99.9%) was fabricated as the samples. The neutron energies were determined by the cross-section ratios for (93)Nb(n, 2n)(92 m)Nb and (90)Zr(n, 2n)(89 m+g)Zr reactions. The fast neutrons were produced by the T(d, n)(4)He reaction. The results obtained were compared with previous data.

Characteristic evaluation of a Lithium-6 loaded neutron coincidence spectrometer.

Characteristics of a (6)Li-loaded neutron coincidence spectrometer were investigated from both measurements and Monte Carlo simulations. The spectrometer consists of three (6)Li-glass scintillators embedded in a liquid organic scintillator BC-501A, which can detect selectively neutrons that deposit the total energy in the BC-501A using a coincidence signal generated from the capture event of thermalised neutrons in the (6)Li-glass scintillators. The relative efficiency and the energy response were measured using 4.7, 7.2 and 9.0 MeV monoenergetic neutrons. The measured ones were compared with the Monte Carlo calculations performed by combining the neutron transport code PHITS and the scintillator response calculation code SCINFUL. The experimental light output spectra were in good agreement with the calculated ones in shape. The energy dependence of the detection efficiency was reproduced by the calculation. The response matrices for 1-10 MeV neutrons were finally obtained.

Cross-section measurements for the reactions of 14 MeV neutrons on indium isotopes.

The cross sections for the reactions (115)In(n, p)(115g)Cd, (115)In(n, alpha)(112)Ag, (115)In(n, 2n)(114m)In, (113)In(n, 2n)(112m)In, (115)In(n, n')(115m)In, and (113)In(n, n')(113m)In induced by 14 MeV neutrons have been measured by activation relative to the (27)Al(n, alpha)(24)Na. Measurements were carried out by gamma-detection using a coaxial HPGe detector. As samples, natural indium has been used. The fast neutrons were produced by the T(d, n)(4)He reaction. The results obtained are compared with existing data.

Theoretical simulation of residual nuclide products in 208,207,206Pb, NATPb and 209Bi (P,X) reactions at intermediate and high energies.

The independent and cumulative measured yields of residual products in thin lead and bismuth targets irradiated with 0.04-2.6 GeV protons are compared with results by the LAHET, CEM03, LAQGSM03, INCL+ABLA, CASCADE and YIELDX codes, in order to evaluate the predictive power of the codes in this energy region. We found that the predictive power of the tested codes is different but is satisfactory for most of the nuclides in the spallation region, though none of the codes agree well with the data in the whole-mass region of product nuclides and all should be improved further. On the whole, the predictive power of all codes for the data in the fission and fragmentation product regions and, especially, at the borders between spallation and fission and between fission and fragmentation regions is much worse than in the spallation region; therefore, development of better evaporation/fission/fragmentation models is of first priority.

Development of neutron-monitor detector using liquid organic scintillator coupled with 6Li + ZnS(Ag) Sheet.

A phoswitch-type detector has been developed for monitoring neutron doses in high-energy accelerator facilities. The detector is composed of a liquid organic scintillator (BC501A) coupled with ZnS(Ag) sheets doped with 6Li. The dose from neutrons with energies above 1 MeV is evaluated from the light output spectrum of the BC501A by applying the G-function, which relates the spectrum to the neutron dose directly. The dose from lower energy neutrons, on the other hand, is estimated from the number of scintillations emitted from the ZnS(Ag) sheets. Characteristics of the phoswitch-type detector were studied experimentally in some neutron fields. It was found from the experiments that the detector has an excellent property of pulse-shape discrimination between the scintillations of BC501A and the ZnS(Ag) sheets. The experimental results also indicate that the detector is capable of reproducing doses from thermal neutrons as well as neutrons with energies from one to several tens of megaelectronvolts (MeV).