Dentinal tubule sealing effects of 532-nm diode-pumped solid-state laser, gallic acid/Fe3+ complex, and three commercial dentin desensitizers.

The purpose of this study was to compare dentinal tubule sealing effects of a 532-nm diode-pumped solid-state (DPSS) laser, gallic acid/Fe3+ complex, and three commercially available dentin desensitizers. Human premolars (n = 44) extracted for orthodontics had standardized cervical cavities prepared, etched (37% phosphoric acid) and randomly assigned to either a control (n = 4), or one of five treatment groups (n = 8/group). Desensitizing treatments were either a 532-nm DPSS laser, gallic acid/Fe3+ complex, oxalate-based Super Seal™ (SS), DIO™ Enamel Coating Pen Pro Tooth (Dio), or adhesive-type Hybrid Coat™ (HC). Dentinal fluid flow (DFF) was monitored continuously in real time during the application of each desensitizing agent, by using a nanoliter-scaled fluid flow-measuring device. Following treatment, morphological changes on dentinal surfaces and within tubules were observed by scanning electron microscopy (SEM). DFF rates were significantly reduced after treatment in all experimental groups (P < 0.05), except SS (P > 0.05). The gallic acid/Fe3+ complex reduced DFF rates the most, and significantly (P < 0.05) more than the three commercial dentin desensitizers. There were no significant differences in DFF reduction rates between the gallic acid/Fe3+ complex and the DPSS laser groups (P > 0.05). There were no significant differences in DFF reduction rates among the three commercial dentin desensitizers (P > 0.05). SEM examination of treated dentin showed that the degree of occlusion of dentinal tubules correlated closely with the corresponding reduction in DFF rates. The gallic acid/Fe3+ complex and 532-nm DPSS laser were superior to other desensitizing methods in occluding dentinal tubules and reducing DFF rates.

Evaluation of dentin tubule occlusion after laser irradiation and desensitizing agent application.

PURPOSE: To evaluate the effects of lasers (Nd:YAG and Er:YAG) and of topical desensitizing agents on dentin tubule occlusion by measuring real-time dentin fluid flow (DFF). METHODS: 32 molars were prepared with V-shape cavity at the cervical area, acid-etched, water rinsed, blotted dry, and treated with (1) Nd:YAG laser; (2) Er:YAG laser; (3) SuperSeal, a desensitizing agent; (4) ClinproXT, a resin-modified glass-ionomer (RMGI) varnish (n = 8 each). A real-time fluid flow measuring instrument (nano-Flow) was used to measure the DFF throughout the procedures. The DFF rates before and after the treatment were compared. Moreover, the surface topography of dentin tubules after each desensitizing method was examined using SEM. RESULTS: DFF varied among the groups. The DFF rate was significantly reduced after laser irradiation/application of the desensitizing agents (P < 0.05). ClinproXT showed the greatest reduction of DFF rate (71.9%), followed by the SuperSeal (34.8%) and laser groups (P< 0.05). However, there was no significant difference between the Nd:YAG (24.1%) and Er:YAG (20.6%) groups (P > 0.05). In SEM images, narrowed dentin tubules were observed in both lased groups and SuperSeal group. In the ClinproXT group, the occluded dentin tubules by the RMGI covering were observed.

Bleaching technique effect on dentin permeability.

PURPOSE: To evaluate the effect of bleaching techniques on dentin permeability. The hypothesis was that the bleaching agent associated or not to etching and/or energy source would be able to increase dentin permeability (conductance). METHODS: Fifty 1 mm-thick disks of mid-coronal dentin were obtained from human third molars, which were mounted in a filtration chamber, allowing exposure of a standardized area of 0.282 mm2. All specimens were treated with 35% liquid phosphoric acid for 15 seconds to maximize dentin permeability. Then they were randomly allocated to five different conditions: C: placebo gel (negative control); HP: Whiteness HP Maxx (WM)-35% hydrogen peroxide; PA-HP: WM preceded by phosphoric acid etching for 15 seconds. HP-E: WM associated to a light source and PA-HP-E: WM preceded by phosphoric acid etching for 15 seconds and associated to a light source. The bleaching agent was applied for 10 minutes with intermediate agitation at 5 minutes. In the groups associated with a light source, it was activated for 30 seconds every 5 minutes. Afterwards, the permeability (Lp) was measured using the Flodec device. The data were collected and analyzed with one-way ANOVA and Tukey's test (P< 0.05). RESULTS: Mean and standard deviation of Lp were: C = 1.92 (1.04); HP = 1.14 (0.29); PA-HP = 14.40 (8.62); HP-E = 4.18 (5.14); PA-HP-E = 27.32 (13.24). Data revealed that phosphoric acid etching could increase the dentin permeability, while the bleaching agent or light curing alone did not.

In vitro and in vivo evaluation of the effectiveness of three dentin desensitizing treatment regimens.

PURPOSE: To evaluate the in vitro and in vivo effects of three treatment regimens on dentin permeability and reduction of dentin hypersensitivity (DH). METHODS: The desensitization treatments were: Gluma Desensitizer PowerGel (GLU), MS Coat One (MSC), and dentin burnishing with fiber-resin burs (STB). A split-chamber device was used to determine the permeability of dentin slices cut from human molars in vitro. Fluid flow through dentin was recorded with a photochemical method after EDTA cleaning, albumin soaking and desensitization treatment (n = 10). 61 study participants with three severely hypersensitive teeth each were enrolled. Sensitivity was determined with an air stimulus before, immediately after treatment, and after 1, 3 and 6 months, using a verbal rating scale. RESULTS: From the 61 study participants enrolled, 52 completed the trial. Permeability at baseline and after albumin soaking was not significantly different. All treatments produced reduced fluid flow through dentin (P > 0.05). All treatments reduced DH significantly (no or moderate sensitivity). Statistical results revealed significant differences among the treatments (P = 0.03). Mann-Whitney comparisons showed GLU, STB < MSC.

The role of toothpaste in the aetiology and treatment of dentine hypersensitivity.

Dentine hypersensitivity (DH) is a common, painful dental condition with a multi-factorial aetiology. The hydrodynamic mechanism theory to explain dentine sensitivity also appears to fit DH: lesions exhibiting large numbers of open dentinal tubules at the surface and patent to the pulp. By definition, DH can only occur when dentine becomes exposed (lesion localisation) and tubules opened (lesion initiation), thus permitting increased fluid flow in tubules on stimulation. Erosion, particularly from dietary acids appears to play a dominant role in both processes. Toothbrushing with most toothpaste products alone cause clinically insignificant wear of enamel but are additive, even synergistic, to erosive enamel loss. Additionally, toothbrushing with toothpaste is implicated in 'healthy' gingival recession. Toothbrushing with most toothpastes removes the smear layer to expose tubules and again can exacerbate erosive loss of dentine. These findings thereby implicate toothbrushing with toothpaste in the aetiology of DH. Management of the condition should have secondary prevention at the core of treatment and therefore, must consider first and foremost the aetiology. Fluoride toothpaste at present appears to provide little primary or secondary preventive benefits to DH; additional ingredients can provide therapeutic benefits. Potassium-based products to block pulpal nerve response have caused much debate and are considered by many as unproven, which should not translate to ineffective. Several toothpaste technologies formulated to block tubules are from studies in vitro, in situ and controlled clinical trials considered proven for the treatment of DH.

The role of fluoride in the preventive management of dentin hypersensitivity and root caries.

OBJECTIVE: The objectives were to bring light on fluoride to control dentin hypersensitivity (DHS) and prevent root caries. MATERIALS AND METHODS: Search strategy included papers mainly published in PubMed, Medline from October 2000 to October 2011. RESULTS: Fluoride toothpaste shows a fair effect on sensitive teeth when combined with dentin fluid-obstructing agents such as different metal ions, potassium, and oxalates. Fluoride in solution, gel, and varnish give an instant and long-term relief of dentin and bleaching hypersensitivity. Combined with laser technology, a limited additional positive effect is achieved. Prevention of root caries is favored by toothpaste with 5,000 ppm F and by fluoride rinsing with 0.025-0.1 % F solutions, as the application of fluoride gel or fluoride varnish three to four times a year. Fluoride measures with tablets, chewing gum, toothpick, and flossing may be questioned because of unfavorable cost effectiveness ratio. CONCLUSION: Most fluoride preparations in combination with dentin fluid obstruction agents are beneficial to reduce DHS. Prevention of root caries is favorable with higher fluoride concentrations in, e.g., toothpaste. CLINICAL RELEVANCE: Fluoride is an effective agent to control DHS and to prevent root caries particularly when used in higher concentrations.

The evaluation of dentinal tubule occlusion by desensitizing agents: a real-time measurement of dentinal fluid flow rate and scanning electron microscopy.

The aims of this study were to examine changes in dentinal fluid flow (DFF) during the application of a desensitizing agent and to compare the permeability reduction levels among different types of desensitizing agents. A cervical cavity was prepared for the exposure of cervical dentin on an extracted human premolar connected to a subnanoliter fluid flow measuring device under 20 cm of water pressure. The cavity was acid-etched with 32% phosphoric acid to make dentin highly permeable. The different types of desensitizing agents that were applied on the cavity were Seal&Protect as the light-curing adhesive type, SuperSeal and BisBlock as oxalate types, Gluma Desensitizer as the protein-precipitation type, and Bi-Fluoride 12 as the fluoride type. DFF was measured from the time before the application of the desensitizing agent throughout the application procedure to five minutes after the application. The characteristics of dentinal tubule occlusion of each desensitizing agent were examined by scanning electron microscopy. The DFF rate after each desensitizing agent application was significantly reduced when compared to the initial DFF rate before application for all of the desensitizing agents (p<0.05). Seal&Protect showed a greater reduction in the DFF rate when compared to Gluma Desensitizer and Bi-Fluoride 12 (p<0.05). SuperSeal and BisBlock exhibited a greater reduction in DFF rate when compared to Bi-Fluoride 12 (p<0.05). The dentin hypersensitivity treatment effects of the employed desensitizing agents in this study were confirmed through real-time measurements of DFF changes. The light-curing adhesive and oxalate types showed greater reduction in the DFF rate than did the protein-precipitation and fluoride types.

Biomimetic dentin desensitizer based on nano-structured bioactive glass.

OBJECTIVES: This study evaluated the ability of a novel sol-gel bioactive glass, in conjunction with appropriate carrier vehicles, to reduce dentinal fluid flow, with an eye toward reducing dentinal hypersensitivity. METHODS: Experiments were conducted to measure the reduction in tubule fluid flow after treatment of cut tooth surfaces with sol-gel bioactive glass particles in several carrier vehicles. Surfaces were also examined after exposure to brushing and acidic solutions. A non-bioactive particulate glass was compared. RESULTS: Tubular occlusion produced by the bioactive glass was observed via SEM and a sustained reduction in hydrodynamic conductance was measured after exposure to various fluids and brushing. CONCLUSIONS: This new material may be used with the tested carriers to significantly and durably reduce tubule fluid flow, ultimately resulting in reduced dentinal hypersensitivity.

Comparison of the effects on dentin permeability of two commercially available sensitivity relief dentifrices.

OBJECTIVE: The in vitro effects of two commercial sensitivity relief dentifrices, one containing 8.0% arginine, calcium carbonate, and 1450 ppm fluoride as sodium monofluorophosphate (MFP), and the other containing 8% strontium acetate and 1040 ppm fluoride as sodium fluoride, in occluding dentin tubules and reducing dentin fluid flow were compared in a blinded study using hydraulic conductance (Flodec). METHODS: Human dentin segments were cut from extracted molars, mounted on acrylic blocks, etched, and connected to a Flodec to measure hydraulic conductance. Segments were divided into two groups (n = 6) and treated for one minute with either the arginine/calcium carbonate dentifrice or the strontium acetate dentifrice. The blocks were rinsed, connected to the Flodec, and the conductance was measured. Blocks were rinsed again and incubated in phosphate-buffered saline (PBS) for at least two hours before the next treatment. The cycle was repeated for a total of three treatments (one using a fingertip and the next two using a toothbrush). After the third treatment, the blocks were incubated in PBS overnight and conductance was re-measured. The two groups were further divided into three sets of two segments each, which were challenged for one minute with either 6% citric acid, orange juice, or grapefruit juice. RESULTS: The hydraulic conductance study showed that the dentifrice containing 8.0% arginine, calcium carbonate, and 1450 ppm fluoride provided a significantly higher percentage reduction in fluid flow immediately after fingertip application, as well as after two brushing cycles, compared to the dentifrice containing 8% strontium acetate and 1040 ppm fluoride. After various acid challenges, the percentage reduction in fluid flow of dentin treated with the arginine/calcium carbonate dentifrice remained significantly higher than that of the strontium acetate dentifrice. These results are highly consistent with the results from an independent clinical study which showed that the arginine/calcium carbonate dentifrice provided dentin hypersensitivity relief immediately after direct topical application with a fingertip and massage for one minute per sensitive tooth, whereas the strontium acetate dentifrice did not. CONCLUSION: Based on this in vitro hydraulic conductance study, the dentifrice containing 8.0% arginine, calcium carbonate, and 1450 ppm fluoride was significantly more effective in reducing fluid flow through dentin tubules as a result of occlusion than the dentifrice containing 8% strontium acetate and 1040 ppm fluoride. Further, the superior occlusion obtained with the arginine/calcium carbonate dentifrice was resistant to acid challenge.

Effect of a new desensitizing material on human dentin permeability.

OBJECTIVES: Resin-modified glass ionomers (RMGI) have demonstrated clinical success providing immediate and long-term relief from root sensitivity. RMGIs have been recently introduced as paste-liquid systems for convenience of clinical usage. The objective of this study was to measure the ability of a new paste-liquid RMGI to reduce fluid flow through human dentin, compared to an established single-bottle nanofilled total etch resin adhesive indicated for root desensitization. METHODS: Dentin permeability was measured on human crown sections on etched dentin, presenting a model for the exposed tubules typical of root sensitivity, and permitting measurement of the maximum permeability. In the first two groups, the etched dentin was coated with either the RMGI or adhesive, and permeability measured on the coated dentin. In a third group, a smear layer was created on the dentin with sandpaper, then the specimens were coated with the RMGI; permeability was measured on the smeared and coated dentin. Specimens from each group were sectioned and examined via scanning electron microscopy (SEM). RESULTS: Both the resin adhesive and the new paste-liquid RMGI protective material significantly reduced fluid flow through dentin, and exhibited excellent seal on dentin with either open tubules or smear-layer occluded tubules. The RMGI infiltrated the smear layer with resin during placement, penetrated dentin tubules, and formed resin tags. SIGNIFICANCE: The RMGI was equivalent to the adhesive in its ability to reduce fluid flow and seal dentin. It is therefore concluded that the new RMGI and the adhesive show the potential to offer excellent sensitivity relief on exposed root dentin.

Mechanism of action of a desensitizing fluoride toothpaste delivering calcium and phosphate ingredients in the treatment of dental hypersensitivity. Part III: Prevention of dye penetration through dentin vs a calcium- and phosphate-free control.

It is generally accepted that the pain of dental hypersensitivity resulting from gum recession is from the movement of fluid within the exposed tubules of dentin, causing changes in pressure on the nerve within the pulpal cavity. One method of treating hypersensitivity is to occlude the tubules, preventing fluid movement. This article discusses the use of a dye penetration technique, which establishes this mechanism of action for a desensitizing fluoride toothpaste containing calcium and phosphate. Two groups of intact teeth were perfectly sealed with enamel paint. Windows 100-micro to 200-micro deep were opened on opposite sides of each tooth at the dentin-enamel junction and briefly etched using 20% polyacrylic acid. One batch of teeth was treated eight times for 30 mins each with a 1:3 slurry of the desensitizing toothpaste and another set with a similar slurry prepared from a calcium- and phosphate-free control. A 0.85% aqueous solution of acid red fuchsin dye was applied to each window and allowed to dry. After a brief rinse, the teeth were sectioned across the windows. Almost no dye penetration was seen in teeth treated with the desensitizing toothpaste; however, extensive penetration through the dentin was visible in the control-treated teeth. The differences in dye penetration for the two sets of teeth were significant by both subjective (P < .001) and objective (P < .01) measures. Tubule occlusion because of calcium and phosphate ions from the desensitizing toothpaste accounts for its tooth desensitizing efficacy.

Prevention of water contamination of ethanol-saturated dentin and hydrophobic hybrid layers.

PURPOSE: This in vitro study evaluated the amount and distribution of outward fluid flow that occurred when an experimental etch-and-rinse hydrophobic adhesive was applied to ethanol-saturated dentin before and after oxalate pretreatment. MATERIALS AND METHODS: Measurements of dentin permeability were performed under a constant pulpal pressure of 20 cm H2O in deep and middle dentin. A lucifer yellow solution was placed in the pulp chamber to determine the distribution of the water contamination of the hybrid layers. RESULTS: The distribution of fluorescence in dentin specimens that were not pretreated with oxalate revealed that the dye permeated around the resin tags and filled the hybrid layer. Dentin specimens pretreated with oxalate prior to resin bonding, showed 80% to 83% less (p < 0.05) water contamination compared to controls. The dentin permeability results obtained before and after oxalate pretreatment showed that oxalate decreased dentin permeability by 98% (p < 0.05) compared to acid-etched controls. This prevented outward fluid movement during bonding, resulting in better resin sealing of dentin due to the formation of a double seal of resin tags over calcium oxalate crystals in the tubules. CONCLUSION: Outward dentinal fluid flow may contaminate hybrid layers during adhesive bonding procedures. Pretreatment of acid-etched dentin with 3% oxalic acid prior to bonding procedures can prevent outward fluid flow during bonding and water contamination of the hydrophobic hybrid layers.

Dentin hypersensitivity: from diagnosis to a breakthrough therapy for everyday sensitivity relief.

This paper provides an overview of the current knowledge of diagnosis, epidemiology, etiology, and clinical management of dentin hypersensitivity. It summarizes technical approaches to relieve sensitivity in professional and home-use products, with emphasis on the clinical evidence for the efficacy of desensitizing toothpaste, and introduces a new innovative dentifrice technology containing 8% arginine, calcium carbonate, and 1450 ppm fluoride. Dentin hypersensitivity is characterized by short, sharp pain arising from exposed dentin in response to external stimuli which cannot be ascribed to any other form of dental defect or disease. The hydrodynamic theory proposes that pain-producing stimuli cause a change in dentin fluid flow that activates intra-dental nerve fibers, via a mechanoreceptor response, to cause pain. To be hypersensitive, dentin must be exposed and dentin tubules must be open to external stimuli and patent at the pulp. Gingival recession is the primary cause of dentin exposure, and a major predisposing factor for dentin hypersensitivity. Dentin hypersensitivity is a prevalent condition. It has been reported to afflict 15-20% of the adult population, typically 20 to 50-year-olds, with peak incidence between 30 and 39 years. Some studies have reported higher prevalence levels of up to 57%. The incidence of dentin hypersensitivity is expected to rise with changing diets, and as caries and periodontal disease prevention result in improved oral health status, and retention and functionality of the dentition. Treatments to relieve dentin hypersensitivity are based on interruption of the neural response to pain stimuli or occlusion of open tubules to block the hydrodynamic mechanism. Effective and robust dentin occlusion offers the greatest prospect for instant and lasting relief of dentin hypersensitivity. In particular, materials which can coat exposed dentin surfaces, in addition to plugging and sealing open dentin tubules, offer the intriguing prospect of strengthening dentin and rendering it less susceptible to predisposing factors, while concurrently reducing dentin hypersensitivity. Clinical studies have shown that a new toothpaste containing 8% arginine, calcium carbonate, and 1450 ppm fluoride as sodium monofluorophosphate offers significantly increased efficacy in reducing sensitivity, compared to a market-leading toothpaste containing 2% potassium ion. Mechanism of action studies have shown that this technology physically seals dentin tubules with a plug that contains arginine, calcium carbonate, and phosphate. This plug, which is resistant to normal pulpal pressures and to acid challenge, effectively reduces dentin fluid flow and, thereby, reduces sensitivity.

A breakthrough therapy for dentin hypersensitivity: how dental products containing 8% arginine and calcium carbonate work to deliver effective relief of sensitive teeth.

OBJECTIVE: These studies have utilized a range of state-of-the-art surface techniques to gain insight into the mechanism of action of a new technology for dentin hypersensitivity relief based upon arginine and calcium carbonate and, in particular, to address important questions regarding the nature and extent of dentin tubule occlusion. METHODS: Confocal laser scanning microscopy (CLSM), scanning electron microscopy (SEM), and atomic force microscopy (AFM) have been used to assess tubule occlusion. Energy dispersive x-ray (EDX) and electron spectroscopy for chemical analysis (ESCA) have been used to identify the composition of the dentin plug. CLSM has also been used to compare the mechanism of action of the toothpaste and the desensitizing prophylaxis paste, to address whether both the arginine and the calcium carbonate components are essential to occlusion, to identify the location of the arginine within the occluded dentin, and to demonstrate resistance of the occlusion to acid challenge. Hydraulic conductance has been used to assess the effectiveness of the arginine-calcium carbonate technology in arresting dentin fluid movement, to evaluate the effects of pulpal pressure on the robustness of the occlusion, and to confirm the resistance of the occlusion to an acid challenge. RESULTS: The CLSM, SEM, and AFM studies demonstrate that the arginine-calcium carbonate technology is highly effective in rapidly and completely occluding dentin tubules. The EDX and ESCA studies show that the dentin surface deposit and occluded tubule plug contain high levels of calcium and phosphate, as well as carbonate. CLSM has confirmed that the toothpaste and the desensitizing prophylaxis paste have the same mechanism of action, that the arginine and calcium carbonate components are both essential to the effectiveness of these products, and that the arginine becomes incorporated into the dentin plug. The hydraulic conductance studies demonstrate that the occlusion provided by the arginine-calcium carbonate technology results in highly significant reductions in dentin fluid flow, and that the tubule plug is resistant to normal pulpal pressure and acid challenge. CONCLUSION: A breakthrough technology based upon arginine and calcium carbonate provides clinically proven benefits with respect to rapid and lasting relief of dentin hypersensitivity. It is unique in that two of its key components, arginine and calcium, are found naturally in saliva, and that the arginine and calcium carbonate work together to accelerate the natural mechanisms of occlusion to deposit a dentin-like mineral, containing calcium and phosphate, within the dentin tubules and in a protective layer on the dentin surface.

Effect of dentin conditioning on dentin permeability and micro-shear bond strength.

The purpose of this study was to compare fluid flow rates across dentin surfaces treated with four conditioners. The effect of conditioning on the micro-shear bond strengths of glass ionomer cement (Fuji IX GP) and resin-based adhesives (Single Bond 2 or Clearfil SE Bond) were also investigated. Under a simulated pressure of 1.3 kPa, two dentin conditioners, phosphoric acid, and a self-etching primer were applied to the dentin surfaces. Dentinal fluid flows at baseline and after conditioning were recorded for 15 min each. The conditioned surfaces were examined using a scanning electron microscope. The micro-shear bond strengths of the glass ionomer cement and of the resin-based adhesives bonded to conditioned dentin surfaces were evaluated while simulated intrapulpal pressure was maintained at 0 or 1.3 kPa. Only the dentin surface etched with phosphoric acid showed a significant increase in permeability. Micro-shear bond strengths of Fuji IX GP were not affected by conditioning the dentin surfaces or by bonding at different intrapulpal pressures (0 or 1.3 kPa). The effects on bond strengths of resin-based adhesives depended on the system used. The simulated positive intrapulpal pressure during bonding significantly affected the adherence of Single Bond 2, whereas Clearfil SE Bond was unaffected.

Effects of a combined application of potassium oxalate gel/adhesive agent on dentin permeability in vitro.

PURPOSE: To test the effects of sequential application of potassium oxalate gel/adhesive agent on in vitro dentin permeability. MATERIALS AND METHODS: Full crown preparations were made in extracted human molars to expose deep coronal dentin. The roots and pulp were removed and the resulting crown segments were connected to a special device (Flodec) to permit the measurement of the permeability of the specimens before and after treatments. Minimum and maximum permeability were recorded after smear layer and phosphoric acid treatment. A new smear layer was created and the permeability measured after the crowns were bonded with Single Bond (3M ESPE), One-Up Bond F (Tokuyama), and AdheSE (Ivoclar Vivadent), either according to manufacturer's instructions or after treating the acid-etched dentin with a 3 wt% potassium oxalate gel. The results were expressed as a percentage of maximum permeability values. Impressions and epoxy resin replicas from the crown segments were produced for SEM examination. RESULTS: None of the adhesives were able to eliminate the fluid flow through dentin. Two-way ANOVA revealed that the application of potassium oxalate prior to the bonding procedures was the most effective technique in reducingthe dentin permeability (p < 0.05), regardless of the adhesive used. SEM micrographs showed that transudation of dentinal fluid could be identified on the surfaces of all replicas. CONCLUSION: The use of potassium oxalate gel was effective in reducing the permeability of bonded dentin.