Supramolecular nanofiber of pyrene-lactose conjugates and its two-photon fluorescence imaging.

A lactose modified pyrene derivative (Py-Lac) was synthesized, with which novel twisted supramolecular nanofibers in diameter about 20 nm were constructed by self-assembly. The nanofibers showed solid-state fluorescence between 400 nm and 650 nm with the maximum emission at 495 nm. Furthermore, its recognition reaction with PNA lectin was investigated by fluorescence spectra and turbidity assays. It is interesting found that the supramolecular assembly as multivalent glycocluster exhibited unique and selectively binding interactions with PNA lectin with the binding constant of 5.74 × 106 M-1. Moreover, compound Py-Lac showed two-photon fluorescence imaging with Hep G2 cells.

Lactose and sucrose aqueous solutions for high-dose dosimetry with 10-MeV electron beam irradiation.

In the present study, dosimetric characterisation of aqueous solutions of lactose and sucrose was analysed by UV spectrometry following irradiation using 10-MeV electron beam at doses between 0.5 and 10.5 kGy. As a dosimetric index, absorbance is selected at 256 and 264 nm for lactose and sucrose aqueous solutions, respectively. The intensity of absorbance for irradiated solutions depends on the pre-irradiation concentration of lactose and sucrose. The post-irradiation stability of both solutions was investigated at room temperature for a measurement period of 22 d.

Sonocrystallization: effect on lactose recovery and crystal habit.

Sonocrystallization is the use of power ultrasound to control the crystallization process, commonly used during the nucleation phase of crystallization. However, in the present study a different approach has been tried, in which the whole process of lactose crystallization from model reconstituted lactose solutions was completed rapidly with the aid of ultrasound, in the presence of 'ethanol' as an anti-solvent, at temperature of 30+/-2 degrees C (ambient temperature). The lactose recovery and crystal properties from sonicated samples were compared with non-sonicated samples. For optimization of sonocrystallization process for rapid lactose recovery, variations in the time of sonication, lactose concentration, protein concentration and pH were tried. A lactose recovery of 91.48% was obtained in 5 min of sonication time, from a reconstituted lactose solution (17.5% w/v, pH 4.2) as against 14.63% under only stirring. Lactose recovery decreased with lowering of pH from 4.2 to 2.8. The protein showed maximum influence on lactose recovery even at concentration of 0.2% w/v. A rapid process of crystallization gave a better uniformity in crystal size distribution of lactose samples.

Dissolution kinetics of single crystals of alpha-lactose monohydrate.

The dissolution kinetics of alpha-lactose monohydrate (alphaLM) single crystals were studied by a flow-cell method at different undersaturations. Linear dissolution profiles were obtained as a function of time for all the faces except the (010) face. The dissolution rates, obtained from these profiles, were anisotropic and varied considerably with undersaturation. At low undersaturations (0-2%), the order of dissolution rate was (110) > (100) > (011) = (110) > (010). This order changed with increasing undersaturation (>5%) to (011) >> (100) > (110) > (110) > (010). In alphaLM crystals in which lattice strain was induced by synchrotron X-irradiation, the rates of dissolution of all faces increased with increasing strain. The increase was less significant for the (011) faces than for the remainder. Under this constraint, the (010) face became the fastest dissolving one and the [011]face became the slowest one. The results of all experiments are explained on the basis that although dislocations may act as initiating dissolution centers at very low undersaturations, these sources rapidly give way to two-dimensional nucleation of randomly distributed dissolution sites as the undersaturation is increased. Under these conditions, which better reflect the normal dissolution processes of materials, bulk lattice strain plays the most significant role in defining the dissolution rate. The results show a potential route to the controlled engineering of the dissolution behavior of crystalline materials.

Effects of thermal neutron irradiation on some potential excipients for colonic delivery systems.

Different excipients, which are currently being studied for colon delivery systems, were examined with respect to their stability toward neutron irradiation as a potential method of radiolabeling the formulations for gamma-scintigraphic studies. Three different pectin and four different hydroxypropyl methylcellulose (HPMC) types, in addition to two types of polymethacrylate films, were exposed to 1, 2, and 3 min of thermal neutron irradiation in a flux of 1.1 x 10(13) n cm-2 s-1. The physicochemical characteristics of pectins and HPMCs and the mechanical properties of the polymethacrylate films were examined after the radioactivity of the samples had declined to background levels. Methods included ultraviolet (UV) and Fourier transform infrared (FTIR) spectroscopy, pH measurements, loss on drying, thermogravimetric analysis (TGA), viscosimetry, gas chromatographic (GC) analysis of pectin monosaccharides, and tensile strength testing of the films. The results suggest that pectins and HPMCs undergo degradation, as expressed by a significant reduction in the dynamic and intrinsic viscosities of the samples. Generally, HPMCs were more sensitive than pectins to neutron irradiation. However, calcium pectinate proved to be the most sensitive among all the investigated polymers. Both polymethacrylate films (Eudragit L and S) resisted loss of mechanical properties following 1 and 2 min of neutron irradiation, whereas irradiation for 3 min implied significant changes in the appearance and the mechanical properties of Eudragit L films. As a conclusion, neutron irradiation results in dose-dependent degradation of the investigated polysaccharides and polymethacrylates. The consequences on the in vitro behavior of a formulation containing such polymers are discussed.