Retrospective analysis of the upper airway anatomy and Sella turcica morphology across different skeletal malocclusions: a computerized technique.

OBJECTIVE: This study aimed to investigate the normal volumetric space and variations in the measurements of different landmarks in adults with different skeletal relations of the maxilla and the mandible based on CBCT data. The study also analyses these landmarks to locate any correlations. BACKGROUND: Numerous studies in orthodontics have found a relationship between orthodontic treatment and changes in the anatomy and function of the airway. Severe changes in airway morphology can cause breathing difficulties, lower quality of life, and even result in life-threatening conditions such as obstructive sleep apnoea. Consequently, orthodontic diagnosis and treatment planning require a thorough understanding of the airway space and its function. METHODS: The present retrospective study was conducted using CBCT records of 120 adult patients, containing 40 samples of each skeletal class (20 males and 20 females). The boundaries were defined for the 3 major regions: the nasopharynx, the oropharynx, and the hypopharynx. Various measurements were recorded across these regions, as well as selective cephalometric landmarks. The obtained data was used to calculate average and standard deviation, while regression analysis was used to evaluate correlations and t-test was used to test statistical significance of gender differences. RESULTS: The results demonstrate that skeletal Class III individuals exhibit a reduced airway volume in the nasopharynx compared to other groups, whereas skeletal Class II individuals displayed a diminished airway volume in the hypopharynx. A strong correlation was observed for Sella turcica parameters. There were no significant differences in skeletal parameters across genders. Nasopharynx cavity volume demonstrated significant differences between skeletal Class I-Class III as well as between skeletal Class II-Class III. Hypopharynx cavity volume also demonstrated significant differences between skeletal Class I-Class II and between skeletal Class II-Class III. CONCLUSION: The major findings are the presence of a reduced nasopharyngeal volume in skeletal Class III malocclusions while skeletal Class II individuals displayed a diminished hypopharyngeal volume, making these critical areas to consider during the diagnostic and orthodontic treatment planning stages. This study also revealed a consistent correlation between Sella turcica parameters across various facial skeletal profiles, with skeletal Class II patients exhibiting a distinct pattern and skeletal Class I and Class III demonstrating an average relationship.

Development and validation of predictive models for skeletal malocclusion classification using airway and cephalometric landmarks.

OBJECTIVE: This study aimed to develop a deep learning model to predict skeletal malocclusions with an acceptable level of accuracy using airway and cephalometric landmark values obtained from analyzing different CBCT images. BACKGROUND: In orthodontics, multitudinous studies have reported the correlation between orthodontic treatment and changes in the anatomy as well as the functioning of the airway. Typically, the values obtained from various measurements of cephalometric landmarks are used to determine skeletal class based on the interpretation an orthodontist experiences, which sometimes may not be accurate. METHODS: Samples of skeletal anatomical data were retrospectively obtained and recorded in Digital Imaging and Communications in Medicine (DICOM) file format. The DICOM files were used to reconstruct 3D models using 3DSlicer (slicer.org) by thresholding airway regions to build up 3D polygon models of airway regions for each sample. The 3D models were measured for different landmarks that included measurements across the nasopharynx, the oropharynx, and the hypopharynx. Male and female subjects were combined as one data set to develop supervised learning models. These measurements were utilized to build 7 artificial intelligence-based supervised learning models. RESULTS: The supervised learning model with the best accuracy was Random Forest, with a value of 0.74. All the other models were lower in terms of their accuracy. The recall scores for Class I, II, and III malocclusions were 0.71, 0.69, and 0.77, respectively, which represented the total number of actual positive cases predicted correctly, making the sensitivity of the model high. CONCLUSION: In this study, it is observed that the Random Forest model was the most accurate model for predicting the skeletal malocclusion based on various airway and cephalometric landmarks.

Relationship between craniofacial skeletal patterns and anatomic characteristics of masticatory muscles: a systematic review and meta-analysis.

BACKGROUND: The anatomic characteristics of the masticatory muscles differ across craniofacial skeletal patterns. OBJECTIVE: To identify differences in the anatomic characteristics of masticatory muscles across different sagittal and vertical craniofacial skeletal patterns. ELIGIBILITY CRITERIA: Studies measuring the thickness, width, cross-sectional area (CSA), volume and orientation of masticatory muscles in healthy patients of different sagittal (Class I, Class II, and Class III) and/or vertical (normodivergent, hypodivergent, and hyperdivergent) patterns. INFORMATION SOURCES: Unrestricted literature searches in 8 electronic databases/registers until December 2023. RISK OF BIAS AND SYNTHESIS OF RESULTS: Study selection, data extraction, and risk of bias assessment with a customised tool were performed independently in duplicate. Random-effects meta-analysis and assessment of the certainty of clinical recommendations with the GRADE approach were conducted. RESULTS: 34 studies (37 publications) were selected with a total of 2047 participants and data from 16 studies were pulled in the meta-analysis. Masseter muscle thickness in relaxation was significantly greater by 1.14 mm (95% CI 0.74-1.53 mm) in hypodivergent compared to normodivergent patients while it was significantly decreased in hyperdivergent patients by - 1.14 mm (95% CI - 1.56 to - 0.73 mm) and - 2.28 mm (95% CI - 2.71 to - 1.85 mm) compared to normodivergent and hypodivergent patients respectively. Similar significant differences were seen between these groups in masseter muscle thickness during contraction as well as masseter muscle CSA and volume. Meta-analyses could not be performed for sagittal categorizations due to insufficient number of studies. CONCLUSIONS: Considerable differences in masseter muscle thickness, CSA and volume were found across vertical skeletal configurations being significantly reduced in hyperdivergent patients; however, results should be interpreted with caution due to the high risk of bias of the included studies. These variations in the anatomic characteristics of masticatory muscles among different craniofacial patterns could be part of the orthodontic diagnosis and treatment planning process. REGISTRATION: PROSPERO CRD42022371187 .

Digital analyses of Bolton tooth size ratios and their association to gender, angle class, and other occlusal traits: a study using a partially automated digital 3D model analysis.

BACKGROUND: This study aims to verify Bolton's values for tooth size ratios and to evaluate possible relationships to different occlusal traits using precise digital measurement methods. MATERIALS AND METHODS: Including 1000 consecutively selected patients from three study centres a digital, partially automated model analysis was performed utilizing the software OnyxCeph. The measurements comprised tooth width for calculation of anterior (AR) and overall ratio (OR) as a percentage, arch width, length, perimeter, overjet, overbite, space analysis in millimetre and the assessment of the angle classification. RESULTS: AR and OR were significantly increased compared to Bolton's ratios of 77.2% (AR) and 91.3% (OR). In the gender comparison, male patients showed larger tooth size ratios, especially in the OR. Patients with Angle Class II/1 and II/2 had smaller tooth size ratios than patients with Angle Class III and I. Thus, patients with Angle Class II/1 had the largest tooth diameters in all maxillary teeth and with Angle Class II/2 the smallest tooth sizes in the mandible. The largest tooth widths in the lower jaw were observed in the Angle Class III patient group. Furthermore, a negative correlation from AR/OR to overjet, overbite, and available space in lower jaw as well as a positive correlation to available space in upper jaw was detected. CONCLUSIONS: There is a clear correlation between the tooth size ratios and the present dysgnathia as well as other orthodontically relevant occlusal traits. This prior knowledge about our patients is extremely important to create an individualized treatment plan and enable sufficient occlusion. To achieve a functionally good occlusion with correct overjet and overbite, it is essential that the maxillary and mandibular teeth are proportional in size. Any deviation from the ideal patient in terms of tooth size, number, shape, or arch must be considered in the pre-therapeutic treatment plan in combination with the existing dysgnathia in order to be able to achieve a stable anterior and posterior occlusion with appropriate adjustments to the therapy post-therapeutically.

[Transverse characteristics of normodivergent patients in different sagittal skeletal patterns].

PURPOSE: This study aimed to measure and analyze the transverse indicators of normodivergent patients with different sagittal skeletal malocclusions, to explore the transverse characteristics of different sagittal skeletal malocclusions. METHODS: Lateral cephalograms and CBCT of 90 normodivergent patients with skeletal Class Ⅰ, Ⅱ and Ⅲ in their permanent dentition were collected. Dolphin software was applied to measure the widths of the basal bone, alveolar bone, dental arch and buccolingual inclination angle of the corresponding teeth in the maxillary and mandibular canine, premolar and molar areas. SPSS 22.0 software package was applied for statistical analysis of the data. RESULTS: The widths of the mandibular basal bone in canine, premolar and molar areas of skeletal Class Ⅲ were (27.15±2.74), (39.30±2.82) and (59.97±2.93) mm, respectively. The widths of the mandibular alveolar bone of skeletal Class Ⅲ were (25.38±1.78), (34.51±2.28) and (47.72±2.73) mm, respectively. The dental arch widths of the maxillary premolar and mandibular canine areas of skeletal Class Ⅲ were (48.70±2.35) and (30.69±2.31)mm, respectively. The above data of skeletal Class Ⅲ were significantly larger than those of skeletal Class Ⅰ and Ⅱ(P＜0.01). The dental arch widths of the maxillary canine, maxillary molar and mandibular molar areas of skeletal Class Ⅲ were (38.88±1.90), (59.51±3.40) and (56.01±2.86)mm, respectively, which were significantly larger than those of skeletal Class Ⅱ(P＜0.05). The maxillomandibular width difference of basal bone in the canine, premolar and molar areas of skeletal Class Ⅲ were (4.69±2.84), (2.31±2.39) and (3.27±2.05) mm, respectively, which were significantly less than that of skeletal Class Ⅰ and Ⅱ(P＜0.01). Compared with skeletal Class Ⅰ, the maxillary canines and first molars of skeletal Class Ⅱ had larger lingual inclination level, while the maxillary first premolars and first molars of skeletal Class Ⅲ had larger buccal inclination level, the mandibular canines and the mandibular first premolars of skeletal Class Ⅲ had larger lingual inclination level(P＜0.01). CONCLUSIONS: For normodivergent patients, the width of the mandibular base bone, alveolar bone, and maxillary and mandibular dental arch in skeletal Class Ⅲ is the widest, which is more likely to have width discrepancy in basal bone. In skeletal Class Ⅲ, the maxillary teeth are buccally inclined, and the mandibular teeth are ingually inclined. In skeletal Class Ⅱ, the maxillary teeth are lingually inclined, and the mandibular teeth are compensatory upright.

Credibility of Pont's index in Egyptian population.

BACKGROUND: Many indices have been suggested to help orthodontists in predicting the ideal dental arch width. One of these was Pont's index which was established by Pont. He suggested equations to predict the ideal maxillary dental arch width (interpremolar and intermolar) from the combined mesiodistal width of the maxillary incisors. This study aimed to test the applicability of Pont's index as an orthodontic diagnostic tool in Egyptian population and to compare the results with those obtained from studies of different ethnic subjects. METHODS: This study was performed using dental casts of 184 Egyptian individuals (82 males and 102 females; age range, 19-24 years). The casts were divided into 46 casts with normal occlusion, 46 casts with class I, 46 casts with class II and 46 casts with class III malocclusion, according to Angle's classification. Alginate impressions were taken for all patients and poured immediately using dental plaster. The real models were transformed into digital models using three-dimensional laser scanner to allow digital model analysis. Predicted arch widths were calculated using Pont's equations. The predicted values were compared to the measured values. RESULTS: Intra class correlation coefficient (ICC) (absolute agreement) between measured and predicted arch widths was determined. Poor absolute agreement was found between measured arch width values and the corresponding values calculated according to Pont's index. CONCLUSION: According to the results of this study, Pont's index is not a reliable method for predicting the ideal dental arch widths in Egyptian populations.

Comparative evaluation of transverse width indices for diagnosing maxillary transverse deficiency.

OBJECTIVES: This study aimed to compare and evaluate different transverse width indices for diagnosing maxillary transverse deficiency (MTD), a common malocclusion characterized by uncoordinated dental arches, crossbites, and tooth crowding. MATERIALS AND METHODS: Sixty patients aged 7-12 years were included in the study, with 20 patients diagnosed with MTD and 40 normal controls. Transverse width indices, including maxillary width at the buccal alveolar crest and lingual midroot level, as well as at the jugal process width, were measured. Differences between these indices and their corresponding mandibular indices were used as standardized transverse width indices. The reference range of these indices was determined and evaluated. Receiver operating characteristic (ROC) analysis was performed to evaluate their diagnostic ability. RESULTS: The transverse width indices and standardized transverse width indices of the MTD group were significantly smaller than those of the control group, except for the jugal process width. The evaluation of the reference range and ROC analysis revealed that the difference of the maxillomandibular width at buccal alveolar crest was the most accurate diagnostic method. CONCLUSIONS: The jugal point analysis method may not be suitable for diagnosing MTD. Instead, measuring the difference in maxillomandibular width at the buccal alveolar crest proves to be a more reliable and accurate diagnostic method for MTD.

Evaluation of the soft tissue facial profile in different skeletal malocclusions in relation to age.

BACKGROUND: The aim of the study was to assess the thickness of the soft tissue facial profile (STFP) in relation to the skeletal malocclusion, age and gender. METHODS: All patients, aged 7-35 years, who were seeking orthodontic treatment at the Department of Orthodontics, Medical University of Warsaw between 2019 and 22 were included in the study. All patients had lateral head radiographs taken before the treatment. The cephalometric analysis was performed including the STFP analysis. The patients were allocated to one of six groups based on age and skeletal relations (ANB angle). The minimum number of patients in each group was 60 with equal gender distribution. The STFP analysis included ten linear measurements. RESULTS: A total of 300 patients were included in the study and allocated to five groups. Group 6 (growing patients with skeletal Class III malocclusion) was not included in the study as it failed to achieve the assumed group size. There were significant differences in the thickness of the STFP in relation to the skeletal malocclusions. Adults with skeletal Class III malocclusion had significantly thicker subnasal soft tissues compared to patients with skeletal Class I and Class II malocclusions. The thickness of the lower lip in patients with Class II skeletal malocclusion was significantly bigger compared to the other groups. Children and adolescents with Class II malocclusions had thicker lower lip in comparison to the group with Class I malocclusion. The majority of the STFP measurements were significantly smaller in children and adolescents compared to adults. The thickness of the STFP in males was significantly bigger in all age groups compared to females. CONCLUSIONS: The thickness of facial soft tissues depends on the patient's age and gender. The degree of compensation of the skeletal malocclusion in the STFP may be a decisive factor during orthodontic treatment planning regarding a surgical approach or a camouflage treatment of skeletal defects.

Functional needs in orthognathic patients with different sagittal skeletal discrepancies.

OBJECTIVES: This retrospective study aimed to evaluate the relationship between the Index of Orthognathic Functional Treatment Need (IOFTN) and sagittal skeletal discrepancy (ANB angle) among orthognathic patients. STUDY DESIGN: Records of 403 orthognathic patients (229 females/174 males, aged 16-50 years) were reviewed. Malocclusion type (incisor-based), sagittal skeletal relationship (ANB angle), and IOFTN scores were documented. Spearman correlation coefficient (r) and scatter plots were utilized to examine the relationship between functional need (IOFTN scores) and sagittal skeletal discrepancy (ANB angle). Regression analyses were conducted to determine the extent to which variations in IOFTN scores could be attributed to variations in ANB angles. RESULTS: Class III malocclusion/sagittal skeletal pattern were most prevalent (62.3%). The Spearman correlation coefficient (r) for the entire sample was -0.297 (P < .001), indicating a weak negative correlation. Linear regression analysis demonstrated a coefficient of determination of 0.069, indicating that approximately 6.9% of the variance in IOFTN data could be accounted for by variations in ANB angles. Upon stratifying data by different malocclusions, coefficients of determination were 0.065, 0.034, and 0.089 for class I, II, and class III malocclusions, respectively. CONCLUSION: The observed linear relationships between sagittal skeletal discrepancy (ANB angle) and IOFTN score were weak and lacked clinical significance.

Influence on the temporomandibular joint induced by mandibular malpositioning caused by vertical dimension elevation and occlusal loss in adult rats: An imaging, histological and immunohistochemical study.

BACKGROUND: Mandibular malpositioning may result in an abnormal concentration of stresses within the temporomandibular joint (TMJ) in adult rats, which may further lead to a series of pathological changes, such as articular cartilage wear, subchondral bone sclerosis and osteophyte formation. However, the pathological and adaptive changes in condylar cartilage caused by different stress distributions are still controversial. OBJECTIVE: The aim of this study was to observe the effect of sagittal changes in mandibular position on condylar cartilage by changing the occlusal vertical dimension (OVD) in adult rats. METHODS: Fifteen-week-old female rats were divided into three groups: control (CON), increased OVD (iOVD) and loss of occlusion (LO) groups. An occlusal plate and tooth extraction were used to establish the animal model. TMJ samples of the experimental and CON groups were observed and investigated by bone morphological, histomorphological and immunohistochemical staining analyses at 3 days, 1 week, 2 weeks, 4 weeks and 8 weeks. Weight curves were plotted. RESULTS: Micro-computed tomography showed that, compared with the CON group, cartilage destruction followed by repair occurred in both experimental groups, which was similar to the trend observed in haematoxylin-eosin staining. All experimental results for the iOVD group showed an approximately similar time trend. Compared with the iOVD group, the toluidine blue and immunohistochemical staining results in the LO group showed no obvious change trend over time. CONCLUSION: Compared with occlusal loss, an increase in OVD caused faster and more severe damage to condylar cartilage, and subchondral bone repair occurred later.

Do patients with different craniofacial patterns have differences in upper airway volume? A systematic review with network meta-analysis.

BACKGROUND: Craniofacial skeletal discrepancies have been associated with upper airway dimensions. OBJECTIVE: To identify differences in upper airway volume across different sagittal and vertical skeletal patterns. SEARCH METHODS: Unrestricted literature searches in eight databases/registers for human studies until May 2023. SELECTION CRITERIA: Cross-sectional studies measuring upper airway volumes using three-dimensional imaging in healthy patients of different sagittal (Class I, Class II, and Class III) or vertical (normodivergent, hypodivergent, and hyperdivergent) craniofacial morphology. DATA COLLECTION AND ANALYSIS: Duplicate independent study selection, data extraction, and risk of bias assessment. Random-effects frequentist network meta-analysis was performed followed by subgroup-analyses and assessment of the quality of clinical recommendations (confidence in effect estimates) with the CINeMA (Confidence in Network Meta-Analysis) approach. RESULTS: Seventy publications pertaining to 66 unique studies were included with 56 studies (5734 patients) contributing to meta-analyses. Statistically significant differences were found for total  pharyngeal airway volume, with Class II having decreased airway volume (-2256.06 mm3; 95% Confidence Interval [CI] -3201.61 to -1310.51 mm3) and Class III increased airway volume (1098.93 mm3; 95% CI 25.41 to 2172.45 mm3) compared to Class I. Significant airway volume reductions for Class II were localized mostly at the oropharynx, followed by the palatopharynx, and the glossopharynx. Significant airway volume increases for Class III were localized mostly at the oropharynx, followed by the intraoral cavity, and hypopharynx. Statistically significant differences according to vertical skeletal configuration were seen only for the oropharynx, where hyperdivergent patients had reduced volumes compared to normodivergent patients (-1716.77 mm3; 95% CI -3296.42 to -137.12 mm3). Airway differences for Class II and Class III configurations (compared to Class I) were more pronounced in adults than in children and the confidence for all estimates was very low according to CINeMA. CONCLUSIONS: Considerable differences in upper airway volume were found between sagittal and vertical skeletal configurations. However, results should be interpreted with caution due to the high risk of bias, owing to the retrospective study design, inconsistencies in anatomic compartment boundaries used, samples of mixed children-adult patients, and incomplete reporting. CLINICAL TRIAL REGISTRATION: PROSPERO (CRD42022366928).

Calcification patterns and morphology of Sella turcica are related to anteroposterior skeletal malocclusions: A cross-sectional study.

BACKGROUND: The sphenoid bone is an irregular, unpaired, symmetrical bone located in the middle of the anterior skull and is involved in craniofacial growth and development. Since the morphology of Sella turcica (ST) is associated with different craniofacial patterns, this study aimed to investigate if there is a correlation between ST morphology on the one hand and sagittal craniofacial patterns on the other hand. METHODS: This study was conducted with a convenience sample that included Brazilian individuals undergoing orthodontic treatment. Lateral cephalograms were used to evaluate the calcification pattern and morphology of ST, as well as skeletal class by analyzing the ANB angle. Pearson's chi-square test with Bonferroni post-hoc test was performed to evaluate the association between ST calcification pattern and morphology, and anteroposterior skeletal malocclusion. The established significance level was 0.05. RESULTS: The study collective was comprised of 305 orthodontic patients (178 (58.4 %) female, 127 (41.6 %) male), who had a mean age of 23.2 (±10.6) years. 131 participants (42.9 %) presented skeletal class I, 142 (46.6%) skeletal Class II, and 32 (10.5%) had a skeletal class III. The degree of prognathism of the mandible showed a homogenous distribution within the study collective (91 (29.9 %) orthognathic, 100 (32.9 %) retrognathic, 113 (37.2 %) prognathic mandible). Concerning the maxilla, 92 (30.2%) individuals presented an orthognathic upper jaw, whereas 60 (19.7%) showed maxillary retrognathism and 153 (50.2%) maxillary prognathism. Compared to patients with skeletal class I, skeletal class III individuals presented significantly more hypertrophic posterior clinoid process (p<0.007) and pyramidal shape of the dorsum of the ST (p<0.038). CONCLUSIONS: Our results suggest that the hypertrophic posterior clinoid process and pyramidal shape of the ST dorsum are more prevalent in individuals with skeletal class III malocclusion.

Three-dimensional analysis of mandibular morphology asymmetry and temporomandibular joint position in patients with unilateral Brodie bite.

OBJECTIVE: Previous studies have shown unilateral posterior crossbite is associated with mandibular asymmetry in morphology and position. However, it remains unclear whether unilateral Brodie bite plays a similar role in mandibular development. Therefore, this study aims to investigate the morphological and positional symmetry of mandibles in patients with unilateral Brodie bite by three-dimensional anaylsis. METHODS: Fourteen patients with unilateral Brodie bite (mean age 18.43 ± 4.24 years) and fourteen sex- and age-matched patients with normal occlusion (mean age 18.07 ± 5.48 years) underwent cone-beam computed tomography (CBCT) scans. 3D surface mesh models of their mandibles were established using Mimics Research 19.0. The surface matching percentage was compared between the original and mirrored mandible by Geomagic Control X software. Furthermore, the dimension and position of the temporomandibular joint (TMJ) were determined for both groups using InVivoDental 5.0. RESULTS: For surface-to-surface deviation analysis, the percentage of mismatch in patients with unilateral Brodie bite was significantly higher than the control group at ±0.50 mm, ±0.75 mm, and ±1.00 mm tolerance (P < .001). In patients with unilateral Brodie syndrome, the condyles on the scissors-bite side showed a significantly more anterior position (P = .03), greater medial inclination (P < .01), and larger posterior TMJ space (P = .01) than the non-scissors-bite side. CONCLUSION: Patients with unilateral Brodie bite exhibit a more asymmetrical mandibular morphology, with a greater anterior condylar position and posterior joint space on the scissors-bite side, indicating that early diagnosis and treatment may be necessary for patients with unilateral Brodie bite.

The Role of Digital Surgical Planning and Surgical Guides in the Treatment of Unilateral Condylar Hyperplasia.

Unilateral condylar hyperplasia (UCH) results in facial asymmetry, malocclusion, and temporomandibular joint dysfunction. Treatment consists of both surgical and orthodontic intervention. A review was performed for 4 patients with UCH who underwent digital surgical planning (DSP)-assisted condylectomy. All patients were female, aged 14 to 35 years at the time of operation with facial asymmetry and class III malocclusion. None of the patients had prior treatment and all had perioperative orthodontic appliances to provide fixation and postoperative elastic therapy. All patients underwent DSP-guided condylectomy, and intraoperative surgical cutting guides were used for 3 of the patients. All had significant improvement in facial symmetry and occlusion. None had recurrence, and additional intervention has not been required. If UCH is recognized before marked secondary changes in the maxilla, mandible, and occlusion, future orthognathic surgery may be potentially obviated. Craniomaxillofacial surgeons should consider using DSP and surgical guides in the treatment of UCH.

Association between adenotonsillar hypertrophy and dentofacial characteristics of children seeking for orthodontic treatment: A cross-sectional study.

OBJECTIVE: To compare the dentofacial characteristics of children with and without adenoid and/or tonsillar hypertrophy. METHODS: A consecutive sample of orthodontic patients aged 6-12 that took pre-treatment lateral cephalograms were included in this study. Those with history of previous orthodontic treatment, adenoidectomy or tonsillectomy, or craniofacial anomalies were excluded. The diagnosis of adenoid and tonsillar hypertrophy was based on Fujioka's and Baroni's methods, according to which the subjects were divided into four groups: the adenoid hypertrophy only (AHO) group; tonsillar hypertrophy only (THO) group; combined adenoid and tonsillar hypertrophy (AH+TH) group; and no adenoid or tonsillar hypertrophy (NH) group. Cephalograms were used for skeletal and dental measurement. Data were analyzed using one-way ANOVA, LSD post-hoc tests and Chi-square test. RESULTS: A total of 598 patients were included. Compared with the NH group, the THO group had significantly larger SNB angle (P < 0.001), as well as significantly smaller ANB angle (P<0.001) and Wits value (P = 0.001). The U1-L1 angle of AHO group was significantly smaller than that in the NH group (P = 0.035). The proportion of adenoid hypertrophy in Class II patients was significantly higher than that in Class III patients (P = 0.001). The proportion of tonsillar hypertrophy in Class III patients was significantly higher than that in Class I patients (P < 0.001) and Class II patients (P < 0.001). CONCLUSION: Over 80 % of children seeking orthodontic treatment had either adenoid or tonsillar hypertrophy. Children with adenoid hypertrophy tend to have skeletal Class II malocclusion, while those with tonsillar hypertrophy tend to have skeletal Class III malocclusion.

A pilot investigation of condylar position and asymmetry in patients with unilateral posterior scissors-bite malocclusion based on three-dimensional reconstructive imaging technique.

OBJECTIVE: Unilateral posterior scissors-bite (uPSB) malocclusion is common clinically. This study aimed to investigate the condylar morphological alterations and condyle-fossa relationship in patients with uPSB, through cone beam computed tomography (CBCT) and three-dimensional reconstructive imaging technique. METHODS: A retrospective study was designed to comparatively analyze 95 patients with uPSB between July 2016 and December 2021. They were divided into three subgroups: 12 to 20, 21 to 30, and ≥ 31 years, according the age distribution. The morphological parameters regarding condyle, fossa, and joint space after three-dimensional reconstruction were measured and analyzed by a series of digital software. SPSS 26.0 software package was performed for statistical analysis on data sets, using paired t-test, one-way analysis of variance, Wilcoxon signed-rank sun test, Kruskal-Wallis H test, and Bonferroni correction. RESULTS: The condylar volume (CV) of scissors-bite side was greater than that of the non-scissors-bite side (CV A = 1740.68 ± 559.80 mm3 > CV N = 1662.25 ± 524.88 mm3, P = 0.027). So was the condylar superficial area (CSA) (CSA A = 818.71 ± 186.82 mm2 > CSA N = 792.63 ± 173.44 mm2, P = 0.030), and the superior joint space (SJS) [SJS A = 2.46 (1.61, 3.68) mm) > SJS N = 2.01 (1.55, 2.87) mm), P = 0.018], and the anterior joint space (AJS) (AJS A = 3.94 ± 1.46 mm > AJS N = 3.57 ± 1.30 mm, P = 0.017). The constituent ratios of the different parts of the bilateral condyles were 23% on the posterior slope, 21% on the top, 20% on the anterior slope, 19% on the lateral slope and 17% on the medial slope, respectively. CONCLUSION: Due to long-term abnormal occlusion of uPSB, the pathological bite force in temporomandibular joint would cause changes in the shape of the condyle. Among them, CV, CSA, SJS and AJS had significant changes in the scissors-bite status, which has the greatest damage to the posterior slope of the condyloid process.

'Study of the maxillary yaw on cone beam computed tomography: A preliminary report and comparison between two different dento-skeletal malocclusions'.

OBJECTIVES: To assess the skeletal and dental maxillary transverse compensation (yaw) on the cone beam computed tomography (CBCT) three-dimensional reconstructed image of the skull in two groups of patients, both clinically affected by a class III malocclusion with deviation of the lower midline. MATERIALS AND METHODS: An observational retrospective study was designed to analyse differences in two groups of patients, the first one was composed by patients affected by horizontal condylar hyperplasia, the second one by patients affected by dento-skeletal asymmetric class III malocclusion. Each group was composed by 15 patients. Transverse analysis was performed by measuring five landmarks (three bilateral and two uneven) with respect to a mid-sagittal plane; sagittal analysis was performed by measuring the sagittal distance on the mid-sagittal plane between bilateral points. Means were compared through inferential analysis. RESULTS: In the condylar hyperplasia group, all differences between the two sides were not statistically significant, nor for canines' difference (P = .0817), for molars (P = .1105) or for jugular points (.05871). In the class III group, the differences between the two sides were statistically significant for molars (P = .0019) and jugular points (P = .0031) but not for canines (P = .1158). Comparing the two groups, significant differences were found only for incisors' midline deviation (P = .0343) and canine (P = .0177). CONCLUSION: The study of the yaw on CBCT should be integrated into three-dimensional cephalometry and could help in differentiating the various malocclusion patterns.

Palatal changes after treatment of functional posterior cross-bite using elastodontic appliances: a 3D imaging study using deviation analysis and surface-to-surface matching technique.

BACKGROUND: The present study aimed to evaluate the changes in palate dimension and morphology after treatment of functional posterior crossbite (FPXB) with elastodontic devices (EAs). METHODS: The treatment group (TG) consisted of 25 subjects (mean age 7.3 ± 0.9 years) who received treatment with EA for one year. The control group (CG) comprised 14 untreated subjects (mean age 6.8 ± 0.7 years). INCLUSION CRITERIA: intra-oral scan registered before (T0) and after treatment (T1), FPXB with a mandibular shift towards the crossbite site of ≥ 2 mm, class I molar relationship. EXCLUSION CRITERIA: missing teeth, anterior crossbite, temporomandibular disorders, previous orthodontic treatment, carious lesions, mobility of deciduous posterior teeth, craniofacial deformities. Digital models were analyzed to assess the inter-canine (ICW) and inter-molar widths (IMW) and the corresponding emi-lateral measurements (eICW and eIMW) using the median palatine plane as reference. According to a specific 3D imaging technology, the morphology and symmetry of the palate was investigated by analysing the 3D deviation between the two specular models of the palate. RESULTS: At T0, both groups showed a significantly narrower dimension of eICW and eIMW at the crossbite side compared to the non-crossbite side (p < 0.05). Also, the 3D deviation analysis demonstrates a limited matching percentage of the original/mirrored models in both TG (81.12%) and CG (79.36%), confirming the asymmetry of the palate. The area of mis-matching was located at the alveolar bone level. At T1, subjects in the TG showed a significant increment of ICW and IMW (p < 0.05), a reduction of the differences of eICW and eIMW between both sides (p < 0.05) and an increment of the percentage matching (TG = 92.32%) (p < 0.05), suggesting a significant recovery of the palatal asymmetry. No significant changes were found between T0 and T1 in the CG (p > 0.05). CONCLUSIONS: EAs could be successfully used to correct FPXB in mixed dentition and could restore the harmonious development of the palate in children.

The impact of mouth breathing on dentofacial development: A concise review.

Mouth breathing is one of the most common deleterious oral habits in children. It often results from upper airway obstruction, making the air enter completely or partially through oral cavity. In addition to nasal obstruction caused by various kinds of nasal diseases, the pathological hypertrophy of adenoids and/or tonsils is often the main etiologic factor of mouth breathing in children. Uncorrected mouth breathing can result in abnormal dental and maxillofacial development and affect the health of dentofacial system. Mouth breathers may present various types of growth patterns and malocclusion, depending on the exact etiology of mouth breathing. Furthermore, breathing through the oral cavity can negatively affect oral health, increasing the risk of caries and periodontal diseases. This review aims to provide a summary of recent publications with regard to the impact of mouth breathing on dentofacial development, describe their consistencies and differences, and briefly discuss potential reasons behind inconsistent findings.

MicroRNA-26b regulates BMSC osteogenic differentiation of TMJ subchondral bone through ß-catenin in osteoarthritis.

Temporomandibular joint osteoarthritis (TMJ-OA) is a degenerative disease of the joint. The early manifestations of TMJ-OA are abnormal remodeling of condylar subchondral bone. In bone tissue, bone marrow mesenchymal stem cells (BMSCs) and osteoblasts play important roles in the differentiation and maturation of most hematopoietic cells. MicroRNA-26b (miR-26b) is upregulated during the osteogenesis of BMSCs, and miR-26b overexpression leads to the activation of ß-catenin and the enhancement of osteogenesis and cartilage formation. However, the pathologic mechanism remains unclear. In the present study, we used a rat model with OA-like changes in the TMJ induced by experimental unilateral anterior crossbite (UAC) and found that the level of miR-26b was markedly lower in BMSCs from the subchondral bones of UAC rats than in those from sham control rats. MiR-26b overexpression by agomiR-26b increased condylar subchondral bone osteogenesis in UAC rats. Notably, although agomiR-26b primarily affected miR-26b levels in the subchondral bone (but not in cartilage or the synovium), the overexpression of miR-26b in BMSCs in UAC rats largely rescued OA-like cartilage degradation, while the inhibition of miR-26b in BMSCs exacerbated cartilage degradation in UAC rats. We measured the expression levels of ß-catenin and related osteogenic and osteoclastic factors after using miR-26b mimics and inhibitors in vivo. Moreover, BMSCs were treated with the ß-catenin blocker Wnt-C59 and then transfected with miR-26b mimics or inhibitors. Then, we examined the expression of ß-catenin as the direct target of miR-26b. The results of the present study indicate that miR-26b may modulate subchondral bone loss induced by abnormal occlusion and influence the osteogenic differentiation of subchondral BMSCs through ß-catenin in the context of TMJ-OA progression.