Silver vanadate nanomaterial incorporated into heat-cured resin and coating in printed resin - Antimicrobial activity in two multi-species biofilms and wettability.

OBJECTIVES: To incorporate the nanostructured silver vanadate decorated with silver nanoparticles (AgVO3) into denture base materials: heat-cured (HC) and 3D printed (3DP) resins, at concentrations of 2.5 %, 5 %, and 10 %; and to evaluate the antimicrobial activity in two multi-species biofilm: (1) Candida albicans, Candida glabrata, and Streptococcus mutans, (2) Candida albicans, Pseudomonas aeruginosa, and Staphylococcus aureus, and the wettability. METHODS: The AgVO3 was added to the HC powder, and printed samples were coated with 3DP with AgVO3 incorporated. After biofilm formation, the antimicrobial activity was evaluated by colony forming units per milliliter (CFU/mL), metabolic activity, and epifluorescence microscopy. Wettability was assessed by the contact angles with water and artificial saliva. RESULTS: In biofilm (1), HC-5 % and HC-10 % showed activity against S. mutans, HC-10 % against C. glabrata, and HC-10 % and 3DP-10 % had higher CFU/mL of C. albicans. 3DP-5 % had lower metabolic activity than the 3DP control. In biofilm (2), HC-10 % reduced S. aureus and P. aeruginosa, and HC-5 %, 3DP-2.5 %, and 3DP-5 % reduced S. aureus. 3DP incorporated with AgVO3, HC-5 %, and HC-10 % reduced biofilm (2) metabolic activity. 3DP-5 % and 3DP-10 % increased wettability with water and saliva. CONCLUSION: HC-10 % was effective against C. glabrata, S. mutans, P. aeruginosa, and S. aureus, and HC-5 % reduced S. mutans and S. aureus. For 3DP, 2.5 % and 5 % reduced S. aureus. The incorporation of AgVO3 into both resins reduced the metabolic activity of biofilms but had no effect on C. albicans. The wettability of the 3DP with water and saliva increased with the addition of AgVO3. CLINICAL SIGNIFICANCE: The incorporation of silver vanadate into the denture base materials provides antimicrobial efficacy and can prevent the aggravation of oral and systemic diseases. The incorporation of nanomaterials into printed resins is challenging and the coating is an alternative to obtain the inner denture base with antimicrobial effect.

Is there an optimal method to detach Candida albicans biofilm from dental materials?

Introduction. Candida albicans can produce a complex, dynamic and resistant biofilm on the surface of dental materials, especially denture base acrylic resins and temporary soft liners. This biofilm is the main aetiological factor for denture stomatitis, an oral inflammatory condition characterized by chronic and diffuse erythema and oedema of the denture bearing mucosa.Gap Statement. There is no consensus in the literature regarding the best method to detach biofilms from dental materials. In order to assess the antifungal efficacy of new materials and treatments, the biofilm needs to be properly detached and quantified.Aim. This study compared different methods of detaching C. albicans biofilm from denture base acrylic resin (Vipi Cril) and temporary soft liner (Softone) specimens.Methodology. Specimens of each material were immersed in an inoculum of C. albicans SC5314 and remained for 90 min in orbital agitation at 75 r.p.m. and 37 °C. After the removal of non-adherent cells, the specimens were immersed in RPMI-1640 medium for 48 h. Biofilm formation was evaluated with confocal laser scanning microscopy (n=5). Then, other specimens (n=7) were fabricated, contaminated and immersed in 3 ml of sterile phosphate-buffered saline (PBS) and vortexed or sonicated for 1, 2, 5, or 10 min to detach the biofilm. The quantification of detached biofilm was performed by colony-forming unit (c.f.u.) ml-1 count. Results were submitted to one-way analysis of variance (ANOVA)/Tukey HSD test (α=0.05).Results. A mature and viable biofilm was observed on the surfaces of both materials. For both materials, there was no significant difference (P>0.05) among detachment methods.Conclusion. Any of the tested methods could be used to detach C. albicans biofilm from hard and soft acrylic materials.

Carbon nanotubes functionalized with sodium hyaluronate: Sterilization, osteogenic capacity and renal function analysis.

AIM: This study determined the optimum gamma irradiation dosage to sterilize sodium hyaluronate (HY), single-walled carbon nanotubes (SWCNT), multi-walled carbon nanotubes (MWCNT) and CNT functionalized with HY (HY-SWCNT and HY-MWCNT), evaluated the structural integrity of the materials and assessed whether sterilized materials kept biological properties without affecting renal function. MAIN METHODS: Materials were submitted to dosages of 100 gγ to 30 Kgγ and plated onto agar mediums for colony forming units (CFUs) counting. Sterilized samples were inoculated with 107Bacillus clausii, submitted again to gamma irradiation, and plated in agar mediums for CFUs counting. Scanning electron microscope was used for structural evaluation of sterilized materials. Tooth sockets of rats were treated with sterilized materials for bone formation assessment and renal function of the animals was analyzed. KEY FINDINGS: The optimum gamma dosage for sterilization was 250 gγ for HY and 2.5 Kgγ for the other materials without meaningful structural changes. Sterilized materials significantly increased bone formation (p < 0.05) and they did not compromise renal function and structure. SIGNIFICANCE: Gamma irradiation efficiently sterilized HY, SWCNT, MWCNT, HY-SWCNT and HY-MWCNT without affecting structural aspects while maintaining their desirable biological properties.

Sealing agent reduces formation of single and dual-species biofilms of Candida albicans and Enterococcus faecalis on screw joints at the abutment/implant interface.

The aim of this research was to evaluate the efficacy of a commercial sealing agent at the abutment/implant interface against microleakage of single and dual-species biofilms of Candida albicans and Enterococcus faecalis into external hexagon (EH) and Morse taper (MT) prosthetic connections. A total of 216 samples of implants and their abutments were tested. Six groups (n = 36) were evaluated based on biofilm and period of incubation (7 and 14 days). The implant connections EH and MT (n = 18) were divided according to the use of the material (n = 9) (EH-T and MT-T: with the sealing agent; EH-C and MT-C: control). The biofilms were analyzed by microbial counting (CFU/mL) and SEM analysis and photographs of the material in the screw joints were also taken. Data were analyzed by Student t test, two-way ANOVA and Bonferroni test. For the single-species biofilms, there was a significant reduction in the growth of E. faecalis when compared MT-C and MT-T or EH-C and EH-T at 7 and 14 days. The same was observed for C. albicans biofilms. For dual-species biofilms of E. faecalis and C. albicans, the sealing agent was more effective in preventing microbial infiltration into the MT connection at 14 days, while microbial infiltration did not occur into EH connections even in absence of the sealing agent for both periods of evaluation. Overall, these data suggest that the presence of the sealing agent reduces or eliminates the microleakage of E. faecalis and C. albicans biofilms into the implants regardless of the period of incubation.

Dental implant surfaces treated with phosphoric acid can modulate cytokine production by blood MN cells.

The study characterizes dental implant surfaces treated with phosphoric acid to assess the effects of acid treatment on blood cells and correlate them with cytokine levels. The implant surfaces examined were divided into untreated metal surface (US; n = 50), metal surface treated with phosphoric acid (ATS; n = 50) and cement surface (CS; n = 50) groups. The samples were characterized by scanning electron microscopy (SEM) and rheometry. The implants were incubated with human blood mononuclear cells for 24 h, with surface rinsing in the ATS treatment. Cell viability was determined by colorimetric methods and cytokines in the culture supernatant were quantified using flow cytometry. In the ATS group, the surface porosity and contact surface were increased and plaques were observed on the surface. The blood flow and viscosity curves were similar among the treatments, and the high cell viability rates indicate the biocompatibility of the materials used. An increase in the levels of IL-2, IL-4, IL-6, IL-10 and TNF-α was observed in the ATS and CS groups. There were positive correlations between IL-10 and IL-2 levels and between IL-10 and IL-4 levels in the culture supernatant of the ATS group. The results suggest that implant surface treatment with phosphoric acid activates the production of inflammatory cytokines. The increased cytokine levels can modulate the immune response, thereby improving biofunctional processes and promoting the success of dental implants.

Deproteinization of primary enamel with sodium hypochlorite before phosphoric acid etching.

The aim of this study was to evaluate the deproteinization of primary enamel by analyzing etching pattern types, with and without the application of 5% NaOCl before acid etching with 37% H3PO4. Fifteen extracted human primary molars were randomly selected for the present in vitro study; 1mm x 1mm blocks were prepared and divided into two groups (n = 21). These groups were treated as follows: Group A- Acid Etching with 37% H3PO4 gel for 15 s; Group B- 5% NaOCl for 60 s + Acid Etching with 37% H3POfor 15 s. The specimens were prepared for scanning electron microscopy analysis. The images were evaluated for quality types I and II etching of the enamel surface using ImageJ software. Datasets were checked for normality by Kolgomorv-Smirnov test and the nonparametric unpaired Mann-Whitney test was applied. The mean surface area of type I and II etching pattern values was 1922.314 µm2for Group A and 3840.473 µm2Group B. We conclude that deproteinization with 5% NaOCl prior to acid etching can be used to increase the area of adhesion and the quality of the etching pattern.

El objetivo del estudio fue evaluar la desproteinización del esmalte primario a través de los tipos de patrones de grabado, con y sin NaOCl 5% utilizado antes del grabado ácido con H3PO4 37%. Quince dientes primarios humanos extraídos se seleccionaron al azar para el presente estudio in vitro, se prepararon bloques de 1mm x 1 mm y se dividieron en dos grupos (n = 21). Estos grupos se trataron de la siguiente manera: Grupo A: Grabado ácido con H3PO4 37% en gel durante 15 segundos; Grupo B: NaOCl 5% durante 60 segundos + Grabado ácido con H3PO4 37% durante 15 segundos. Las muestras se prepararon para el análisis de microscopía electrónica de barrido. Las imágenes obtenidas se evaluaron principalmente por la calidad de los grabados tipo I y II de la superficie del esmalte primario, utilizando el software Image J. Los datos se analizaron en cuanto a su normalidad mediante la prueba de Kolgomorv-Smirnov, se utilizó pruebas no paramétricas: Prueba de Mann-Whitney no pareada. Como resultado, se encontró que el área de superficie media de los valores de patrón de grabado de tipo I y II para el Grupo A era 1922,314 µm2 y el Grupo B era 3840,473 µm2. Finalmente, llegamos a la conclusión de que se puede usar la desproteinización con NaOCl 5% antes del grabado ácido para aumentar el área de adhesión y la calidad del patrón de grabado.

Antibacterial, chemical and physical properties of sealants with polyhexamethylene guanidine hydrochloride.

The aim of this study was to evaluate the influence of polyhexamethylene guanidine hydrochloride (PHMGH) in the physico-chemical properties and antibacterial activity of an experimental resin sealant. An experimental resin sealant was formulated with 60 wt.% of bisphenol A glycol dimethacrylate and 40 wt.% of triethylene glycol dimethacrylate with a photoinitiator/co-initiator system. PHMGH was added at 0.5 (G0.5%), 1 (G1%), and 2 (G2%) wt.% and one group remained without PHMGH, used as control (GCTRL). The resin sealants were analyzed for degree of conversion (DC), Knoop hardness (KHN), and softening in solvent (ΔKHN), ultimate tensile strength (UTS), contact angle (θ) with water or α-bromonaphthalene, surface free energy (SFE), and antibacterial activity against Streptococcus mutans for biofilm formation and planktonic bacteria. There was no significant difference for DC (p > 0.05). The initial Knoop hardness ranged from 17.30 (±0.50) to 19.50 (± 0.45), with lower value for GCTRL (p < 0.05). All groups presented lower KHN after immersion in solvent (p < 0.05). The ΔKHN ranged from 47.22 (± 4.30) to 57.22 (± 5.42)%, without significant difference (p > 0.05). The UTS ranged from 54.72 (± 11.05) MPa to 60.46 (± 6.50) MPa, with lower value for G2% (p < 0.05). PHMGH groups presented no significant difference compared to GCTRL in θ (p > 0.05). G2% showed no difference in SFE compared to GCTRL (p > 0.05). The groups with PHMGH presented antibacterial activity against biofilm and planktonic bacteria, with higher antibacterial activity for higher PHMGH incorporation (p < 0.05). PHMGH provided antibacterial activity for all resin sealant groups and the addition up to 1 wt.% showed reliable physico-chemical properties, maintaining the caries-protective effect of the resin sealant over time.

Antibacterial, chemical and physical properties of sealants with polyhexamethylene guanidine hydrochloride

Abstract The aim of this study was to evaluate the influence of polyhexamethylene guanidine hydrochloride (PHMGH) in the physico-chemical properties and antibacterial activity of an experimental resin sealant. An experimental resin sealant was formulated with 60 wt.% of bisphenol A glycol dimethacrylate and 40 wt.% of triethylene glycol dimethacrylate with a photoinitiator/co-initiator system. PHMGH was added at 0.5 (G0.5%), 1 (G1%), and 2 (G2%) wt.% and one group remained without PHMGH, used as control (GCTRL). The resin sealants were analyzed for degree of conversion (DC), Knoop hardness (KHN), and softening in solvent (ΔKHN), ultimate tensile strength (UTS), contact angle (θ) with water or α-bromonaphthalene, surface free energy (SFE), and antibacterial activity against Streptococcus mutans for biofilm formation and planktonic bacteria. There was no significant difference for DC (p > 0.05). The initial Knoop hardness ranged from 17.30 (±0.50) to 19.50 (± 0.45), with lower value for GCTRL (p < 0.05). All groups presented lower KHN after immersion in solvent (p < 0.05). The ΔKHN ranged from 47.22 (± 4.30) to 57.22 (± 5.42)%, without significant difference (p > 0.05). The UTS ranged from 54.72 (± 11.05) MPa to 60.46 (± 6.50) MPa, with lower value for G2% (p < 0.05). PHMGH groups presented no significant difference compared to GCTRL in θ (p > 0.05). G2% showed no difference in SFE compared to GCTRL (p > 0.05). The groups with PHMGH presented antibacterial activity against biofilm and planktonic bacteria, with higher antibacterial activity for higher PHMGH incorporation (p < 0.05). PHMGH provided antibacterial activity for all resin sealant groups and the addition up to 1 wt.% showed reliable physico-chemical properties, maintaining the caries-protective effect of the resin sealant over time.

Dental implant surfaces treated with phosphoric acid can modulate cytokine production by blood MN cells

Abstract: The study characterizes dental implant surfaces treated with phosphoric acid to assess the effects of acid treatment on blood cells and correlate them with cytokine levels. The implant surfaces examined were divided into untreated metal surface (US; n = 50), metal surface treated with phosphoric acid (ATS; n = 50) and cement surface (CS; n = 50) groups. The samples were characterized by scanning electron microscopy (SEM) and rheometry. The implants were incubated with human blood mononuclear cells for 24 h, with surface rinsing in the ATS treatment. Cell viability was determined by colorimetric methods and cytokines in the culture supernatant were quantified using flow cytometry. In the ATS group, the surface porosity and contact surface were increased and plaques were observed on the surface. The blood flow and viscosity curves were similar among the treatments, and the high cell viability rates indicate the biocompatibility of the materials used. An increase in the levels of IL-2, IL-4, IL-6, IL-10 and TNF-α was observed in the ATS and CS groups. There were positive correlations between IL-10 and IL-2 levels and between IL-10 and IL-4 levels in the culture supernatant of the ATS group. The results suggest that implant surface treatment with phosphoric acid activates the production of inflammatory cytokines. The increased cytokine levels can modulate the immune response, thereby improving biofunctional processes and promoting the success of dental implants.

Experimental titanium alloys for dental applications.

STATEMENT OF PROBLEM: Although the use of titanium has increased, casting difficulties limit routine use. PURPOSE: The purpose of the present study was to compare the mechanical properties and biocompatibility of the experimental titanium alloys titanium-5-zirconium, titanium-5-tantalum, and titanium-5-tantalum-5-zirconium (in wt%) with those of commercially pure titanium. MATERIAL AND METHODS: Specimens of titanium alloys and commercially pure titanium were cast by using plasma. Their modulus of elasticity and ultimate tensile strength were determined in a universal testing machine. Biocompatibility was evaluated with SCC9 cells. In periods of 1, 4, 7, 10, and 14 days, cell proliferation was evaluated by the (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) tetrazolium reduction assay, and cell viability was evaluated in the 7-day period. Cell morphology was evaluated at 2, 12, and 24 hours. Modulus of elasticity, ultimate tensile strength, and cell viability were analyzed by 1-way ANOVA and the Bonferroni test; cell proliferation data were compared by 2-way ANOVA (alloy versus time) and by the Bonferroni test; and the cell morphology data were analyzed by split-plot design. All statistical tests were performed at the 95% confidence level (P<.05). RESULTS: Titanium-5-tantalum presented the lowest modulus of elasticity and ultimate tensile strength, whereas titanium-5-zirconium and titanium-5-tantalum-5-zirconium were statistically similar to commercially pure titanium. Cell proliferation and viability were not affected by any alloy being similar to those observed for commercially pure titanium. No noticeably differences were found in the morphology of cells cultured on any alloy and commercially pure titanium. CONCLUSION: Experimental alloys, especially titanium-5-zirconium and titanium-5-tantalum-5-zirconium, presented promising mechanical results for future studies and clinical applications. In addition, these alloys, evaluated by cell proliferation, viability, and morphology, were found to be biocompatible in vitro.

Genotoxicity of endosseous implants using two cellular lineages in vitro.

The genotoxic potential of corrosion eluates obtained from a single dental implant using murine fibroblasts or osteoblasts cells in vitro by the single-cell gel (comet) assay was examined. A single commercially available dental implant (Biotechnology) was eluted in a solution consisting of equal amounts of acetic acid and sodium chloride (0.1 M) for 1, 3, 7, 14, and 21 days. Murine fibroblast or osteoblast cultures were then exposed to all corrosion eluates obtained from endosseous dental implants for 30 minutes at 37°C. The results suggest that none of the eluates produced genotoxic changes in murine fibroblasts regardless of the length of exposure to the eluate. Similarly, no genotoxicity was found in osteoblasts. The results suggest that the dental implant eluates tested in this study did not induce genetic damage as depicted by the single-cell gel (comet) assay. Because DNA damage is an important event during oncogenesis, this study represents a relevant contribution to estimate the real risks to the cellular system induced by the corrosion products of a dental implant.

Effect of triazine derivative added to denture materials on a microcosm biofilm model.

The aim of this study was to assess the effect of triazine incorporation to denture materials on biofilm formation of saliva derived from microcosms of patients who are positive for Candida albicans. Biofilms were formed on microwave-cured acrylic resin, one hard denture liner, and two soft denture liners containing 0, 2.5, 5, and 10% triazine. For experimental subset (n = 10), mechanical properties of the materials and colony-forming unit counts from the biofilms formed on the materials were assessed. Flexural strength and modulus decreased with the addition of 2.5% triazine (p < 0.01). In general, the addition of 5 and 10% triazine leaded to more soluble materials (p < 0.001). Saliva donor with candidiasis resulted in higher counts of total microorganisms (p = 0.0294) and Streptococci (p = 0.0008). Soft denture liners showed the highest counts for total microorganisms, Streptococci, and Candida species (p < 0.001). The addition of triazine directly to denture materials was not beneficial in reducing biofilm formation in a complex biofilm model.

Oral mucosa tissue response to titanium cover screws.

BACKGROUND: Titanium is the most widely used metal in dental implantology. The release of particles from metal structures into the biologic milieu may be the result of electrochemical processes (corrosion) and/or mechanical disruption during insertion, abutment connection, or removal of failing implants. The aim of the present study is to evaluate tissue response of human oral mucosa adjacent to titanium cover screws. METHODS: One hundred fifty-three biopsies of the supra-implant oral mucosa adjacent to the cover screw of submerged dental implants were analyzed. Histologic studies were performed to analyze epithelial and connective tissue as well as the presence of metal particles, which were identified using microchemical analysis. Langerhans cells, macrophages, and T lymphocytes were studied using immunohistochemical techniques. The surface of the cover screws was evaluated by scanning electron microscopy (SEM). RESULTS: Forty-one percent of mucosa biopsies exhibited metal particles in different layers of the section thickness. Particle number and size varied greatly among specimens. Immunohistochemical study confirmed the presence of macrophages and T lymphocytes associated with the metal particles. Microchemical analysis revealed the presence of titanium in the particles. On SEM analysis, the surface of the screws exhibited depressions and irregularities. CONCLUSIONS: The biologic effects seen in the mucosa in contact with the cover screws might be associated with the presence of titanium or other elements, such as aluminum or vanadium. The potential long-term biologic effects of particles on soft tissues adjacent to metallic devices should be further investigated because these effects might affect the clinical outcome of the implant.

Inhibition of the activity of matrix metalloproteinase 2 by triethylene glycol dimethacrylate.

The aim of this study was to evaluate the effect of different concentrations of triethylene glycol dimethacrylate (TEGDMA) on the inhibition of matrix metalloproteinase 2 (MMP-2). Mouse gingival explants were cultured overnight in DMEM and the expression of secreted enzymes was analyzed by gelatin zymography in buffers containing 5 mM CaCl(2) (Tris-CaCl(2)) in 50 mM Tris-HCl buffer with the addition of TEGDMA at different concentrations (0.62%, 1.25%, 2.5%, or 5.0% (v/v)). The gelatinolytic proteinase present in the conditioned media was characterized as matrix metalloproteinase by means of specific chemical inhibition. The matrix metalloproteinases present in the conditioned media were characterized as MMP-2 by immunoprecipitation. The eletrophoretic bands were scanned and the transmittance values were analyzed. Data was plotted and submitted to linear regression to investigate MMP-2 inhibition as a function of TEGDMA concentration. Three major bands were detected in the zymographic assays. These bands were characterized as MMP-2. Zymogene (72 kDa), intermediate (66 kDa) and active forms of MMP-2 (62 kDa) were inhibited by TEGDMA in a dose-dependent way. These findings suggest that TEGDMA could inhibit MMP-2 expression even at small concentrations.

Microbial contamination and inhibitory effect against Streptococcus mutans from fifth-generation bonding systems.

PURPOSE: The aim of this study was to evaluate microbial contamination and inhibitory effect against Streptococcus mutans (SM) of Prime & Bond (PB), Single Bond (SB) and Excite (EX) bonding systems before use, and after 10 and 20 applications. METHODS: The bonding material was collected by applying a drop of the material directly on broth brain-heart infusion. The samples were homogenized, diluted and seeded on blood agar plates. To evaluate the inhibitory effect on SM, a drop of each bonding material was dispensed on filter discs and placed on blood agar plates. The Cochran statistical analysis was used to evaluate the total amount of viable bacteria among the different bonding systems. Comparisons between the inhibitory effects on SM were made using the Kruskal-Wallis test. RESULTS: Adhesives SB and EX presented microbial contamination (p<0.05) and inhibitory effect (p<0.05) over SM strains with statistically significant differences concerning PB. SB and EX inhibitory capacity remained after 20 applications. CONCLUSIONS: The monomer's variation in chemical composition, solvent and application technique of the bonding systems had an influence on contamination by the total number of bacteria and on the inhibitory effect on SM.

Characterization and in vitro cytocompatibility of an acid-etched titanium surface.

The aims of this study were to characterize the microstructure of a commercially pure titanium (cpTi) surface etched with HCl/H2SO4 (AE-cpTi) and to investigate its in vitro cytocompatibility compared to turned cpTi (T-cpTi). T-cpTi showed a grooved surface and AE-cpTi revealed a surface characterized by the presence of micropits. Surface parameters indicated that the AE-cpTi surface is more isotropic and present a greater area compared to T-cpTi. The oxide film thickness was similar between both surfaces; however, AE-cpTi presented more Ti and O and less C. Osteoblastic cell proliferation, alkaline phosphatase activity, and bone-like nodule formation were greater on T-cpTi than on AE-cpTi. These results show that acid etching treatment produced a surface with different topographical and chemical features compared to the turned one, and such surface modification affected negatively the in vitro cytocompatibility of cpTi as demonstrated by decreasing culture growth and expression of osteoblastic phenotype.

Characterization and in vitro cytocompatibility of an acid-etched titanium surface

The aims of this study were to characterize the microstructure of a commercially pure titanium (cpTi) surface etched with HCl/H2SO4 (AE-cpTi) and to investigate its in vitro cytocompatibility compared to turned cpTi (T-cpTi). T-cpTi showed a grooved surface and AE-cpTi revealed a surface characterized by the presence of micropits. Surface parameters indicated that the AE-cpTi surface is more isotropic and present a greater area compared to T-cpTi. The oxide film thickness was similar between both surfaces; however, AE-cpTi presented more Ti and O and less C. Osteoblastic cell proliferation, alkaline phosphatase activity, and bone-like nodule formation were greater on T-cpTi than on AE-cpTi. These results show that acid etching treatment produced a surface with different topographical and chemical features compared to the turned one, and such surface modification affected negatively the in vitro cytocompatibility of cpTi as demonstrated by decreasing culture growth and expression of osteoblastic phenotype.

O objetivo deste estudo foi caracterizar a microestrutura de uma superfície de titânio comercialmente puro (cpTi) condicionada com HCl/H2SO4 (acid etched) (AE-cpTi) e investigar sua citocompatibilidade in vitro, comparada à do cpTi usinado (turned) (T-cpTi). O T-cpTi apresentou uma superfície com sulcos e o AE-cpTi exibiu uma superfície caracterizada pela presença de micro-vales. Os parâmetros de superfície indicaram que a superfície AE-cpTi é mais isotrópica e apresenta uma área maior quando comparada à superfície T-cpTi. A espessura da camada de óxido foi similar para as duas superfícies; no entanto, a AE-cpTi apresentou maiores quantidades de Ti e O e menor, de C. A proliferação de células osteoblásticas, a atividade de fosfatase alcalina e a formação de matriz mineralizada foram maiores na superfície T-cpTi que na AE-cpTi. Esses resultados mostram que o condicionamento ácido produziu uma superfície com características topográficas e químicas diferentes quando comparadas às da superfície usinada. Além disso, observou-se que essas modificações de superfície afetaram de forma negativa a citocompatibilidade in vitro do cpTi como demonstrado pela inibição da proliferação celular e da expressão do fenótipo osteoblástico.

In situ effects of restorative materials on dental biofilm and enamel demineralisation.

OBJECTIVES: Since secondary caries is one of the main reasons for replacing restorations, this study assessed the effects of different restorative materials on the microbiological composition of dental biofilm and on enamel demineralisation around the restoration. METHODS: A randomized, double-blind, split-mouth in situ design was conducted in one phase of 14 days, during which, 20 volunteers wore palatal devices containing five human dental enamel slabs. Each slab was randomly restored with one of the following materials: Filtek-Z-250/Single Bond, control group (composite resin), Permite (amalgam), Fuji II (encapsulated resin-modified glass ionomer), Vitremer (resin-modified glass ionomer) and Ketac Molar (conventional glass ionomer). The volunteers used fluoride dentifrice, 3x/day and a 20% sucrose solution was dripped onto the slabs 8x/day. The biofilm formed on the slabs was analyzed to determine the counts of total streptococci, mutans streptococci and lactobacilli. Enamel demineralisation was determined by cross-sectional microhardness (CSMH) at 20 and 70 microm from the margin of the restoration. Kruskal-Wallis and analysis of variance, followed by least mean squares (LMS) test, were used to evaluate microbiota and CSMH among the groups. The significance level used was 5%. RESULTS: No statistically significant differences were found in the cariogenic microbiota grown on the slabs. At a 20-mum distance, only Fuji II statistically differed from the other groups, showing the lowest demineralisation. At 70 microm, Fuji II significantly inhibited demineralisation when compared to Permite, Filtek-Z-250 and Ketac Molar. CONCLUSIONS: In the context of fluoride dentifrice and under the cariogenic exposure conditions of this study, only the encapsulated resin-modified glass ionomer material provided additional protection against secondary caries.

Comparative scanning electron microscopic study of the effect of different dental conditioners on dentin micromorphology.

This study evaluated comparatively by scanning electron microscopy (SEM) the effect of different dental conditioners on dentin micromorphology, when used according to the same protocol. Forty dentin sticks were obtained from 20 caries-free third human molars and were assigned to 4 groups corresponding to 3 conditioners (phosphoric acid 37%, Clearfil SE Bond and iBond) and an untreated control group. After application of the conditioners, the specimens were immersed in 50% ethanol solution during 10 s, chemically fixed and dehydrated to prepare them to SEM analysis. In the control group, dentin surface was completely covered by smear layer and all dentinal tubules were occluded. In the phosphoric acid-etched group, dentin surface was completely clean and presented exposed dentinal tubule openings; this was the only group in which the tubules exhibited the funnel-shaped aspect. In the groups conditioned with Clearfil SE Bond primer and iBond, which are less acidic than phosphoric acid, tubule openings were occluded or partially occluded, though smear layer removal was observed. SE Bond was more efficient in removing the smear layer than iBond. In the Clearfil SE Bond group, the cuff-like aspect of peritubular dentin was more evident. It may be concluded all tested conditioners were able to change dentin morphology. However, it cannot be stated that the agent aggressiveness was the only cause of the micromorphological alterations because a single morphological pattern was not established for each group, but rather an association of different aspects, according to the aggressiveness of the tested conditioner.