Evaluation of Mesiodistal Angulation of Maxillary Anterior Teeth in Incisal View Using Manual and Digital Methods: An In Vivo Study.

AIM: The aim of the present research was to assess the mesiodistal angulation of the maxillary anterior teeth utilizing Image J computer software, a Profile projector, and a Custom-made jig. MATERIALS AND METHODS: A total of 34 subjects (17 males and 17 females) were chosen from a group of 18-30 years old with bilateral Angle Class I molars and canine relationships. One manual approach (Custom-made jig) and two digital methods (J computer software, a Profile projector) were used to record the mesiodistal angulation in incisal view. The individuals had alginate impressions made, and a facebow was used to capture the maxilla's spatial relationship with the cranium. The articulated cast with the help of mounting ring moved to the specially customized jig, then the angulations was measured in the incisal view after the casts were placed in a semi-adjustable articulator. Data were recorded and statistically analyzed. RESULTS: The mesiodistal angulation in the incisal view via three methods between the 17 males and 17 females has statistically significant different. Although the mesiodistal angulation for maxillary lateral incisor and canine did not show any statistically significant difference, the maximum and minimum values obtained were always greater in males in comparison with the females. This indicates that the positions of six maxillary anterior teeth in the males resulted in the creation of upward sweep of incisal edges of central and lateral incisors which was also referred to as "smiling line" producing masculine surface anatomy more squared and vigorous while feminine surface anatomy being more rounded, soft, and pleasant. There was no statistically significant difference between the right and left sides, indicating bilateral arch symmetry and the symmetrical place of the right teeth compared with the left side's corresponding teeth. CONCLUSION: On conclusion, according to the current study's findings, all three approaches can measure the mesiodistal angulations of maxillary anterior teeth in incisal view with clinically acceptable accuracy. The digital methods, which included using the Image J computer software and the profile projector, achieved more accurate results than the manual method. CLINICAL SIGNIFICANCE: The outcomes of this study's mesiodistal angulations can be used as a reference for placing teeth in both fully and partially edentulous conditions. This study contributes to a better understanding of the importance of achieving the ideal occlusion in the Indian population by placing the maxillary anterior teeth at the proper mesiodistal angulation. How to cite this article: Shadaksharappa SH, Lahiri B, Kamath AG, et al. Evaluation of Mesiodistal Angulation of Maxillary Anterior Teeth in Incisal View Using Manual and Digital Methods: An In Vivo Study. J Contemp Dent Pract 2024;25(4):320-325.

Gender-Based Variation in Alveolar Bone Thickness of Maxillary Incisor Teeth: A CBCT Retrospective Study.

BACKGROUND This retrospective study from a single center in Cyprus aimed to assess labial (buccal) and palatal bone thickness in 6 anterior maxillary teeth of 120 adults using cone-beam computed tomography (CBCT). MATERIAL AND METHODS The CBCT scans of 120 patients (720 teeth) were examined, with scanning parameters of 90 kvP, 24 s, 4 mA, voxel size 0.3 mm, and field of view of 10×6 cm. All maxillary incisors were categorized into 3 distinct points in terms of buccal (B) and palatal (P) points, with points B1 (buccal) and P1 (palatal) 4 mm below the cementoenamel junction; points B2 and P2 at the midpoint between the labial and palatal alveolar crest plane extending to the root apex; and points B3 and P3 at the root apex. Evaluation was done by measuring the distance from these points to the labial and palatal alveolar bone. RESULTS When the thicknesses were measured between all 6 points and labial and palatal bone, the thickness of point B3 of tooth 13 in men was significantly higher than that in women. At points P1, P2, and P3 for teeth 11 and 13, the palatal bone thickness of men was significantly higher than that of women. At points P2 and P3 of tooth 12, the palatal bone thickness of men was significantly higher than that of women. CONCLUSIONS The study found a correlation between alveolar bone thickness and patient sex in the North Cyprus population. Alveolar bone thickness in the anterior maxillary should be considered in implant treatment and orthodontic techniques.

Evaluation of the Golden Proportion, Golden Percentage, and Recurring Esthetic Dental Proportion in Kenyans of African Descent.

OBJECTIVES: To evaluate the validity of the Golden Proportion, Golden Percentage, and Recurring Esthetic Dental (RED) Proportion among Kenyans of African descent with naturally well-aligned teeth. MATERIALS AND METHODS: Standardized frontal photographic images of the smiles of 175 participants aged 18-35 years were obtained, and Adobe Photoshop was used to analyze and measure the frontal widths of the maxillary central and lateral incisors and canines in triplicate. The average teeth widths were calculated to determine the existence of the Golden Proportion, Golden Percentage, and RED Proportion, and their validity using independent sample t-tests to compare the differences in the mean teeth widths at α < 0.05. RESULTS: The number of male and female participants was 107 (61.1%) and 68 (38.9%), respectively. The Golden Proportion between the maxillary central and lateral incisors was found in 4.0% on the right and 2.8% on the left of all the participants, but between the maxillary lateral incisors and canines was found in only 0.6% on the right of male participants (p < 0.0001). The RED Proportion between the maxillary lateral and central incisors was in the range of 67%-70%, and between the canines and lateral incisors was 82%-84% (p < 0.0001). The proportion of RED was not constant, and gradually increased distally. The Golden Percentage of 15% was observed in the lateral incisors bilaterally; however, in the central incisors and the canines, the Golden Percentage was 22% and 12%, respectively. CONCLUSION: The Golden and RED Proportions were invalid determinants of anterior teeth proportions. The Golden Percentage existed only in the lateral incisors. The Golden Proportion, RED Proportion, and Golden Percentage theories may not be applicable to all populations when designing smiles. Racial and ethnic backgrounds are important considerations to establish objective quantifiable values of anterior tooth proportions that are beneficial for esthetic restorations.

Predictability of expansion movements performed by clear aligners in mixed dentition in both arches: a retrospective study on digital casts.

BACKGROUND: to evaluate the predictability of expansion achieved in patients in early mixed dentition treated with Clear Aligners (CA), analyzing the efficiency of the expansion at the end of the first set of aligners and at the end of the therapy in the upper and lower arch. METHODS: 36 patients (20 F, 16 M; mean age 8.3 ± 1.5 years) were selected retrospectively from the Department of Orthodontics of the Hospital of Rome "Tor Vergata". All subjects were treated with CA with no other auxiliaries than attachments. For each patient a standardized sequential expansion protocol was planned for both arches. Digital dental casts were created at three observation periods from an intraoral scanner: prior to treatment (T0), at the end of the first set of aligners (T1), at the end of treatment (T2). The 3D models in planned position determined by the first Clincheck (CC) were obtained for comparison with T1 and T2. Six linear transversal measurements were used to evaluate the dimensional changes and the predictability of expansion movements, comparing T1-CC and T2-CC. RESULTS: a statistically significant increase within the pre-treatment and the final outcomes for all the variables examined was found. In the upper arch, the greatest level of predictability was detected at the level of the first (46.44%) and second deciduous molar width (44.95%) at T1. The analysis of T2-CC changes showed a significant increase in the percentage of predictability of expansion at the level of the first permanent molars, at mesial (54.86%) and distal (58.92%) width. In the lower arch, a higher percentage of predictability than the upper arch was reported at T1-CC and T2-CC, with the greatest values at the level of second (T1-CC: 48.70%; T2-CC: 75.32%) and first deciduous molar width (T1-CC: 45.71%; T2-CC: 72.75%). CONCLUSIONS: CA can induce significant transversal increments. The predictability of expansion is variable, but it did not exceed the 50% during the first set of aligners. It was necessary to apply refinement set to achieve a good predictability for expansion of about 70%. The expansion in the lower arch was observed to be more predictable than in the upper arch.

Morphological and Dimensional Analysis of the Nasopalatine Canal: Insights from Cone-Beam Computed Tomography Imaging in a Large Cohort.

BACKGROUND The nasopalatine canal (NPC), or incisive canal, is located in the midline of the palate, posterior to the maxillary central incisors. Its anatomy is important in prosthetic dentistry procedures. This study aimed to assess the anatomical morphology of the NPC according to age, sex, and dental status using cone-beam computed tomography (CBCT) in 335 patients. MATERIAL AND METHODS In this retrospective cross-sectional study, a total of 335 patients were recruited and categorized according to sex, age, and dental status. Individual CBCT images were analyzed in the sagittal, coronal, and axial planes. Also, we recorded the dimensions and morphological shape of the NPC and adjacent buccal bone plate (BBP) under standardized conditions. The associations between sex, age group, NPC shapes and types, and presence of central incisors were assessed. A significance level was set at P<0.05. RESULTS Mean labio-palatal and mediolateral measurements of the incisive foramen were 5.13±1.45 mm and 3.21±0.96 mm, whereas the mean diameter of Stenson foramen was 2.57±1.25 mm, and the total length of the NPC was 11.79±2.50 mm. Funnel, Y, and round-shaped canals were the most prevalent shapes of the NPC in sagittal, coronal, and axial planes. BBP was greater in men, with P=0.011, P=0.000, and P=0.001 at BBP1, BBP2, and BBP3, respectively. CONCLUSIONS NPC and BBP parameter values were slightly higher among male patients. NPC parameters increased with older age. The crest width of BBP decreased with older age and after missing maxillary central incisor teeth.

Integrated correlation analysis of the thickness of buccal bone and gingiva of maxillary incisors.

OBJECTIVE: This study aimed to validate the integrated correlation between the buccal bone and gingival thickness of the anterior maxilla, and to gain insight into the reference plane selection when measuring these two tissues before treatment with implants. METHODOLOGY: Cone beam computed tomography (CBCT) and model scans of 350 human subjects were registered in the coDiagnostiX software to obtain sagittal maxillary incisor sections. The buccal bone thickness was measured at the coronal (2, 4, and 6 mm apical to the cementoenamel junction [CEJ]) and apical (0, 2, and 4 mm coronal to the apex plane) regions. The buccal gingival thickness was measured at the supra-CEJ (0, 1mm coronal to the CEJ) and sub-CEJ regions (1, 2, 4, and 6 mm apical to the CEJ). Canonical correlation analysis was performed for intergroup correlation analysis and investigation of key parameters. RESULTS: The mean thicknesses of the buccal bone and gingiva at different levels were 0.64~1.88 mm and 0.66~1.37 mm, respectively. There was a strong intergroup canonical correlation between the thickness of the buccal bone and that of the gingiva (r=0.837). The thickness of the buccal bone and gingiva at 2 mm apical to the CEJ are the most important indices with the highest canonical correlation coefficient and loadings. The most and least prevalent subgroups were the thin bone and thick gingiva group (accounting for 47.6%) and the thick bone and thick gingiva group (accounting for 8.6%). CONCLUSION: Within the limitations of this retrospective study, the thickness of the buccal bone is significantly correlated with that of the buccal gingiva, and the 2 mm region apical to the CEJ is a vital plane for quantifying the thickness of these two tissues.

Morphological Variations of the Nasopalatine Canal in the North Cyprus Population: A Cone Beam Computed Tomography Study.

BACKGROUND This study aimed to evaluate the morphological characteristics of the anterior maxillary nasopalatine canal and the width of the buccal bone using cone-beam computed tomography (CBCT) in 150 adults in Northern Cyprus. MATERIAL AND METHODS The study included 150 participants, and their anterior maxillary morphometric measurements (eg, length of the nasopalatine canal and anteroposterior diameter of the nasal foramen) were taken using CBCT with the scanning parameters of 90 kvP, 24 s, 4 mA, voxel size 0.3 mm, and field of view 10×6 cm. The shapes of the nasopalatine canal (NPC) were categorized into 4 types: cylindrical, hourglass, funnel-shaped, and banana (54%, 20.6%, 18.6%, and 4%, respectively). RESULTS The findings showed a clear link between the shape of the NPC and the horizontal dimensions of the anterior maxilla's morphometric properties. In general, decreased horizontal bone dimensions were found in the premaxilla at the banana- and funnel-shaped type for the nasopalatine canal. Also, the anteroposterior diameter of a nasal foramen in the hourglass shape was significantly larger in diameter than all other shapes. Additionally, the morphology of the nasopalatine canal is influenced by its shape. The sagittal cross-section has shown significant correlations with the sizes of the incisive foramen, nasal foramen, and the length of the nasopalatine canal. CONCLUSIONS The study found a correlation between the shape of the NPC and the horizontal dimensions of the anterior maxilla's anatomy. The measurements of NPC in a North Cyprus population slightly differ from the established standards found in the existing literature. Conducting more extensive studies with a larger number of CBCT images will offer additional insights.

A micro-computed tomographic evaluation of maxillary first molar root canal morphology in Black South Africans.

PURPOSE: This study was conducted to investigate the root canal anatomy of maxillary first molars in Black South Africans. METHODS: Micro-computed tomography was used to investigate 101 maxillary first molars (53 teeth from the right, 48 from the left; 50 male and 51 female teeth). The number of root canals in each tooth was determined, and the relationship between side, sex and age was analyzed using chi-squared test. To determine intra- and inter-observer reliability, Cohen's kappa coefficients were calculated. RESULTS: Intra- and inter-rater agreements of 96.92% and 98.08% were achieved, respectively. Most teeth contained either three or four canals, but a second, third and fourth mesio-buccal canal was found in 60.39%, 5.94% and 0.99% of teeth, respectively. The disto-buccal and palatal roots contained predominantly single canals, but additional canals were noted in 2.97% and 1.98% of teeth. Four canals were common in females and teeth on the right side often contained a second mesio-buccal canal. However, the prevalence of a third mesio-buccal canal was higher in males than in females. CONCLUSION: The teeth studied showed diversity and variations between sexes and arch sides. These findings will aid clinicians in endodontic treatment and will be applicable for educational purposes.

Anatomical Possibilities of the Alveolar Bone at the Upper Second Premolar Level.

Background and Objectives: The upper posterior teeth are typically regarded as being exclusively inferior to the maxillary sinus (MS). The expansion of the nasal fossa above the maxillary alveolar base (MAB) needs better investigation. The hypothesis was raised that the MAB in the upper premolar region, which is usually addressed by surgeons for the elevation of the antral floor, is not exclusively beneath the MS. Therefore, we aimed to document the possible upper relations of the MAB as antral, nasal, or both. Materials and Methods: A total of 145 CBCT scans were used to study four types of MAB: type 1-antral; type 2-antral with a palatal recess; type 3-antral and nasal; type 4-nasal. In type 2, the orthoradial width of the alveolar bone, the rectilinear width of the antral floor, and the maximum depth of the palatal recess were measured. For type 3, the MAB width and the straight widths of the antral and nasal segments of the MAB were measured. Results: Type 1 was found in 67.24%, type 2 in 13.45%, type 3 in 16.21%, and type 4 in 3.1% of the 290 MSs investigated. Palatal recesses were found in 11.72% of the MSs on the right side and 15.17% of the MSs on the left side. Types 1 and 2 exhibited strongly statistically significant bilateral symmetry (Pearson's Chi2 = 86.42, p < 0.001). Type 3 correlated equally with contralateral types 1 and 3. The bilateral symmetry for types 1-3 was stronger in the males (Pearson's Chi2 = 47.83, p < 0.001) than in the females (Pearson's Chi2 = 56.96, p < 0.001). There were no statistically significant associations between sex and the unilateral anatomical type. Conclusions: The MAB in the upper second premolar area should not be considered to be exclusively antral during surgeries or in anatomical teaching.

Micro-computed tomography (micro-CT) evaluation of root canal morphology in immature maxillary third molars.

The endodontic treatment of immature permanent teeth with necrotic pulp is a significant clinical challenge. The success of regenerative endodontic procedure is highly dependent on disinfection of the root canal and an accurate anatomical knowledge of the root canal. The aim of this study was to use micro-computed tomography (micro-CT) analysis to investigate the configuration of root canals in the upper permanent third maxillary molars with incomplete root development in their coronal, apical and middle third portions. Thirty immature third permanent maxillary molars were scanned using a micro-CT system. Then, we measured the diameters and areas of the root canal in the coronal, middle and apical third of the roots. The ratio between the long and short diameter of each root canal was then calculated and the canals were divided into several groups: round, oval, long oval, flat and irregular. The round configuration was not observed in the distobuccal and mesiobuccal roots in any of their anatomical regions. Oval and long oval canals predominated in the distobuccal root. The greatest variations were observed in the mesiobuccal root, with the ribbon-shaped canal predominating in the middle region and an irregular shape in the apical region. In the coronal region of the palatal canal, the round configuration predominated; in the middle third, we observed an almost equivalent distribution between round and oval configurations; apically, the oval shape predominated. In conclusion, we observed significant complexity and variation in the morphology and configuration of root canals in immature permanent molars, thus generating additional obstacles for the success of regenerative endodontics.

Superimposition of virtual models using palatal rugae and maximum habitual intercuspation.

INTRODUCTION: The superimposition of 3 dimensions (3D) digital models has been increasingly used for evaluating dental changes resulting from orthodontic treatment, and different superimposition techniques have been described. Although the maxilla has areas with greater stability for superimposition, such as the palatal rugae, there is still no reliable method for superimposing models of the lower arch. OBJECTIVE: Therefore, this article aims to describe a technique for superimposing virtual models. METHODS: To evaluate pre- and post-orthodontic treatment changes, the Geomagic Qualify 2013 software (3D Systems®, Rock Hill, South Carolina, USA) was used, with reference points in the maxilla, including the rugae and a reference area in the palate and midpalatal raphe. The lower arch was superimposed using the maximum habitual intercuspation (MHI) model as reference. RESULTS AND CONCLUSION: 3D models superimposition using palatal rugae and MHI occlusion seems to offer satisfactory results in the interpretation of clinical changes at different follow-up moments in terms of development and/or orthodontic treatment.

Morphology and classification of the second mesiobuccal canal in maxillary first molars: a cone-beam computed tomography analysis in a Chinese population.

BACKGROUND: Understanding the tooth anatomy is crucial for ensuring effective endodontic treatment. This study investigated the root canal morphology of the second mesiobuccal (MB2) canal in maxillary first molars (MFMs) in a Chinese population using cone-beam computed tomography (CBCT). METHODS: This study evaluated 486 MFMs with MB2 canals from 285 participants undergoing CBCT examination and determined the Vertucci's classification and position of the MB2 canal orifice. The prevalence of the MB2 canal was correlated with the sex, age, and tooth side. The correlations between the prevalence of the MB2 canal and sex and tooth side were assessed using the Fisher's exact test. The chi-square test was used for evaluating the correlation between the prevalence of the MB2 canal and age. RESULTS: The number of type II, III, IV, V, VI, VII, and other root canals in the MFMs was 30.9%, 0.6%, 65.0%, 1.2%, 1.2%, 0.4%, and 0.6%, respectively. Among the 201 cases with bilateral inclusion, 87.6% showed consistent canal configuration. Results of the first clear apparent position (FCAP) of the MB2 canals showed that 434, 44, and 3 teeth had FCAP at the upper, middle, and bottom one-third of the root, respectively. The FCAPs of the MB2 canal in the MFMs with types II, IV, and VI, as well as types III and V canals showed significant differences (p<0.05). The horizontal distance between the MB1 and MB2 canal orifices in the type II canals of MFMs was significantly lesser than those in the type IV canals of MFMs (p < 0.01). The longitudinal distance between the pulp chamber floor plane and MB2 canal orifice significantly correlated with age (p < 0.05). CONCLUSIONS: The morphology of the mesiobuccal root canal in the MFMs is complex. Complete understanding of the anatomical morphology of the root canal combined with the CBCT and dental operating microscope is necessary for the accurate detection of the MB2 canal and consequently improved success rate of root canal treatment. Our study findings can help endodontists improve endodontic treatment outcomes.

Maxillary Canine Impaction: Assessing the Influence of Maxillary Anatomy Using Cone Beam Computed Tomography.

BACKGROUND The purpose of this study was to evaluate the anatomical characteristics of patients with unilateral impacted canine teeth compared to a control group. Cone beam computed tomography (CBCT) records were retrospectively analyzed. MATERIAL AND METHODS CBCT records of 64 patients with unilateral impacted canine teeth (57.8% female and 42.2% male) and 64 controls (59.4% female and 40.6% male) were retrospectively analyzed. On the CBCT images, intermolar width, arch length, arch perimeter, palatal width in the molar region at cementoenamel junction, palatal width in the molar region at the crest, palatal width in the molar region measured from mid-root level, nasal cavity width, and palatal depth were evaluated. RESULTS In the palatal width measurement from the mid-root variable, the measurement of labially positioned canines was significantly lower than the control group (P<0.05). In terms of intermolar width, the labial positioned impacted canines' values were lower than in the control group. There was a significant difference in terms of the perimeter variable and both palatinally and labially positioned impacted canines were significantly lower than in the control group (P<0.05). All parameters were compared according to sex, and measurements of male patients were significantly higher than in female patients (P<0.05). CONCLUSIONS A labially impacted canine was strongly linked to a decrease in mid-root palatal and intermolar widths. Additionally, impacted canines positioned both palatally and labially were found to result in a reduced arch perimeter. Moreover, male patients with impacted canines exhibited notably greater anatomical measurements compared to female patients.

Exploring age and gender variations in root canal morphology of maxillary premolars in Saudi sub population: a cross-sectional CBCT study.

BACKGROUND: In complex teeth like maxillary premolars, endodontic treatment success depends on a complete comprehension of root canal anatomy. The research on mandibular premolars' root canal anatomy has been extensive and well-documented in existing literature. However, there appears to be a notable gap in available data concerning the root canal anatomy of maxillary premolars. This study aimed to explore the root canal morphology of maxillary premolars using cone-beam computed tomography (CBCT) imaging, considering age and gender variations. METHODS: From 500 patient CBCT scans, 787 maxillary premolar teeth were evaluated. The sample was divided by gender and age (10-20, 21-30, 31-40, 41-50, 51-60, and 61 years and older). Ahmed et al. classification system was used to record root canal morphology. RESULTS: The most frequent classifications for right maxillary 1st premolars were 2MPM1 B1 L1 (39.03%) and 1MPM1 (2.81%), while the most frequent classifications for right maxillary 2nd premolars were 2MPM1 B1 L1 (39.08%) and 1MPM1 (17.85%). Most of the premolars typically had two roots (left maxillary first premolars: 81.5%, left maxillary second premolars: 82.7%, right maxillary first premolars: 74.4%, right maxillary second premolars: 75.7%). Left and right maxillary 1st premolars for classes 1MPM1 and 1MPM1-2-1 showed significant gender differences. For classifications 1MPM1 and 1MPM1-2-1, age-related changes were seen in the left and right maxillary first premolars. CONCLUSION: This study provides novel insights into the root canal anatomy of maxillary premolars within the Saudi population, addressing a notable gap in the literature specific to this demographic. Through CBCT imaging and analysis of large sample sizes, the complex and diverse nature of root canal morphology in these teeth among Saudi individuals is elucidated. The findings underscore the importance of CBCT imaging in precise treatment planning and decision-making tailored to the Saudi population. Consideration of age and gender-related variations further enhances understanding and aids in personalized endodontic interventions within this demographic.

Canine sexual dimorphism in crown and root dimensions: a cone-beam computed tomographic study.

The primary step in forensic odontological analysis is sex determination. The present study is one of the few studies that evaluated the accuracy of the combination of canine tooth root length and crown measurements for sex determination. The study sample comprised 196 cone-be am computed tomographic scans of individuals aged 20-80 years distributed in five age categories: 20-29, 30-39, 40-49, 50-59, and 60+ years old. Different parameters, such as width, length, and ratio measurements for the crown and root of each maxillary and mandibular canine tooth, were examined and recorded. The findings indicated that maxillary canines had greater sex dimorphism ability (87.3%) than mandibular canines (80.6%). Total tooth length and root length of maxillary canine were the most pronounced variables in the differentiation of sex groups. When the combination of the mandibular and maxillary measurements was considered, the accuracy for sex dimorphism was 85.7%. By using ratio variables, the accuracy was reduced to 68.9%. According to the findings of this study, total tooth length and root length are the most discriminant variables of canine teeth. These variables are more reliable sex indicators than crown measurements.

Quantitative evidence for dimorphism suggests sexual selection in the maxillary caniniform process of Placerias hesternus.

Placerias hesternus, a Late Triassic dicynodont, is one of the last megafaunal synapsids of the Mesozoic. The species has a tusk-like projection on its maxillary bone, known as the caniniform process. This process has been hypothesized to be sexually dimorphic since the 1950s, however this claim has not been thoroughly investigated quantitatively. Here, we examined maxillae, premaxillae, quadrates, and fibulae from a single population from the Placerias Quarry in the Blue Mesa Member of the Chinle Formation, near St. Johns, Arizona, USA to determine if the caniniform process is dimorphic. We made a total of 25 measurements from the four bones and used a maximum likelihood framework to compare the fit of unimodal versus bimodal distributions for each set of measurements. Our results from complete maxillae reveal that the caniniform process has two distinct morphs, with a shorter and longer form. This interpretation is substantiated both by strong statistical support for bimodal distribution of caniniform lengths, and by clustering analysis that clearly distinguishes two morphs for the maxillae. Clustering analysis also shows support for potential dimorphism in the shape of the quadrate. However, no measurements from elements other than the maxilla have a strong likelihood of bimodal distribution. These results support the long-standing hypothesis that the caniniform in Placerias was dimorphic. Alternative explanations to sexual dimorphism that could account for the dimorphism among these fossils include the presence of juveniles in the sample or time-averaged sampling of a chronospecies, but both have been previously rejected for the Placerias Quarry population. The lack of strong dimorphism in non-maxilla elements and increased variation in caniniform length of the large-caniniform morph suggest that the caniniform is a secondary sexual trait, possibly used in intraspecific competition.

Morphological evaluation of the nasopalatine canal using cone beam computed tomography and its clinical implications for orthodontic miniscrew insertion.

BACKGROUND: The morphology of the nasopalatine canal is crucial in the planning of prosthetic restorations in the anterior region of the maxilla, as well as in the placement of orthodontic mini-implants. OBJECTIVES: The aim of this study was to assess the morphology of the nasopalatine canal using cone beam computed tomography (CBCT) scans of patients from the University Dental Clinic in Krakow, Poland, to define the position of the canal in relation to common sites of palatal median microimplant placement, and to investigate potential correlations between the anatomy of the canal and age and gender of the patients. MATERIAL AND METHODS: A total of 120 CBCT images were used to assess the anatomy of the nasopalatine canal in 3 planes of space. The bone thickness anterior to the nasopalatine canal and the distance between the distal margin of Stenson's foramen and the predicted midpalatal microimplant position were also measured. RESULTS: The most frequently observed canal type in the coronal plane was the Y-shaped canal, which was present in 60.8% of patients. The nasopalatine canal was classified as cone-shaped in 31.7% of the scans, cylindrical in 28.3%, hourglass-shaped in 27.5%, and banana-shaped in 12.5%. The mean length of the nasopalatine canal was 11.58 mm. The mean width of the canal was 2.89 mm at the nasal fossa level, 1.94 mm in the middle, and 5.09 mm at the palatal level. The mean bone thickness anterior to the nasopalatine canal was 9.07 mm at the level of the nasal opening, 6.84 mm at the level of the oral opening, and 7.32 mm in the middle. The mean distance between the distal margin of Stenson's foramen and the predicted midpalatal microimplant position varied from 0 to 11.94 mm, with a mean of 2.49 mm. CONCLUSIONS: Given the variety of nasopalatine canal forms and dimensions, detailed analysis of CBCT scans is essential prior to the placement of implants and microimplants.

Anatomic relationship between the root apex of maxillary molars and maxillary sinus in the presence of antagonist teeth: A Kwak's method with divisions.

OBJECTIVE: The purpose of the study was to evaluate the proximity between the root apices of maxillary molars and maxillary sinus floor using cone-beam computed tomography (CBCT) in the southern Turkish subpopulation. DESIGN: For the study, 246 CBCT images were analyzed. The absence of antagonist teeth was excluded. Kwak's types III and V were detailed with three divisions. Division M; the penetration of the mesial root only, Division D; the penetration of the distal root only, and Division MD; the penetration of both buccal roots. The distance between the maxillary sinus and the root apices was measured. Student's t-test, one-way ANOVA, and chi-square were used for statistical analysis. RESULTS: The penetration of maxillary molars was 24.40%. The highest prevalence belonging to Type I. Division MD was 44.35% for Type III and 40.42% for Type V. Division M was higher than Division D. The distances between the sinus and root apices were 1.35-2.41 mm in Type I. The distance decreased with age (p < 0.05). CONCLUSION: Both buccal root penetration into the sinus was higher than the single root penetration. The distance of the second molar root apices to the sinus was closer than the first molar. One-quarter of the first and second molars were inside the sinus. A greater likelihood of penetration of the root apices into the sinus with increased age.

[A two-dimensional photographic and three-dimensional digital dental model comparative analysis in maxillary anterior teeth].

Objective: To assess the accuracy of two-dimensional (2D) photographs in measuring esthetic parameters of the maxillary anterior teeth by comparing them with measurements obtained from three-dimensional (3D) dental models. Methods: A total of one hundred volunteers (49 males, 51 females, aged 18-23 years) were recruited from School and Hospital of Stomatology, Wuhan University from January to February 2024. 3D digital models of their dentitions were obtained using an intraoral scanner, and standardized frontal 2D intraoral photographs were captured with a digital camera. The lengths, widths and width/length ratio of the bilateral incisors, lateral incisors and canines were measured on both the 3D digital models and the 2D intraoral photographs. The width ratios of adjacent maxillary anterior were also calculated on the 2D intraoral photographs and the frontal view of 3D digital models. Results: The widths of lateral incisors [(5.85±0.60) mm] and canines [(4.73±0.71) mm] and the lengths of canines [(8.72±0.96) mm] in the 2D intraoral photographs were significantly lower than those in 3D digital models [(6.65±0.59), (7.76±0.60), (8.90±0.86) mm] (t=-18.24, P<0.001; t=-54.43, P<0.001; t=-4.40, P<0.001), while there were no significant differences in the lengths and widths of the other teeth (P>0.05). The width/length ratios measured from the 2D intraoral photographs for the lateral incisors and canines (0.74±0.08, 0.55±0.08) were significantly lower than those measured in the 3D digital models (0.84±0.09, 0.88±0.09) (t=-19.68, P<0.001; t=-50.21, P<0.001), and the width/length ratio of the central incisors showed no significant difference between the two groups (P>0.05). The width ratios of canines/lateral incisors and lateral incisors/central incisors measured on the 2D intraoral photographs (0.72±0.06, 0.85±0.11) were significantly smaller than those measured in the frontal view of 3D digital models (0.75±0.06, 0.89±0.11) (t=-9.31, P<0.001; t=-6.58, P<0.001). Conclusions: There is a difference between 2D and 3D measurement results of teeth in the esthetic area and the magnitude of the difference varies with their position in the dental arch. When analyzing the measurement of the anterior teeth, it is necessary to choose the appropriate method according to the target tooth position.

Dimensional stability of 3D-printed edentulous and fully dentate hollowed maxillary models over periods of time.

BACKGROUND: Dental casts made utilising digital workflow are becoming more common because to their speed and cost savings. However, studies on their dimensional accuracy over time with diverse designs are missing. OBJECTIVE: The aim of this in vitro study was to assess the dimensional stability of 3D-printed edentulous and fully dentate hollowed maxillary models with 50-micrometer resolution over 1 day, 14 days, and 28 days using surface matching software. METHODS: Scanned edentulous and fully dentate maxillary typodont models were used as references. The models were scanned by a desktop lab scanner of 15-micrometer accuracy (D900, 3Shape). Then, the files were used in designing software (Meshmixer, Autodesk) to create hollowed maxillary casts. Fifteen edentulous and 15 fully dentate (total of 30) models were printed using a DLP lab printer (Cara print 4.0, Kulzer). The 3D-printed models were scanned using the same desktop lab scanner of 15-micrometer accuracy at intervals of baseline days, 1 day, 14 days, and 28 days to assess the effect of aging (n = 120). The dimensional changes were quantified and compared using the root mean square (RMS) method, expressed in micrometres (µm). The study employed repeated measures analysis of variance (ANOVA) to assess and compare the root mean square (RMS) values across the variables. The data was analysed using SPSS (26, Chicago, Illinois, USA). RESULTS: The RMS of the edentulous models rapidly increased from a mean value of 0.257 at the beginning of the study to 0.384 after twenty-eight days. However, the mean RMS values for the dentate models did not change much over the four intervals. It varied only from 0.355 to 0.347. The mean values for edentulous patients increased from 0.014 to 0.029 during the period from baseline to twenty-eight days. However, the mean average values decreased for the dentate models from 0.033 to 0.014 during this period. By utilizing ANOVA, mean RMS values increased insignificantly till one day but significantly to fourteen and twenty-eight days. Dentate model mean values differed insignificantly across four intervals. Repeated measures ANOVA for combined and separated data showed no significant differences across edentulous, dentate, and total models over times. CONCLUSION: The study revealed changes in the dimensions of 3D-printed edentulous models over a span of 3 and 4 weeks. Caution should be applied when using 3D-printed dental master models for constructing definitive prostheses on edentulous models over a period of 3 to 4 weeks.