Canavalia bonariensis lectin: Molecular bases of glycoconjugates interaction and antiglioma potential.

CaBo is a mannose/glucose-specific lectin purified from seeds of Canavalia bonariensis. In the present work, we report the CaBo crystal structure determined to atomic resolution in the presence of X-man, a specific ligand. Similar to the structural characteristics of other legume lectins, CaBo presented the jellyroll motif, a metal binding site occupied by calcium and manganese ions close to the carbohydrate-recognition domain (CRD). In vitro test of CaBo cytotoxicity against glioma cells demonstrated its ability to decrease the cellular viability and migration by induction of autophagy and cell death. Molecular docking simulations corroborate previous data indicating that the lectin's biological activities occur mostly through interactions with glycoproteins since the lectin interacted favorably with several N-glycans, especially those of the high-mannose type. Together, these results suggest that CaBo interacts with glycosylated cell targets and elicits a remarkable antiglioma activity.

Layer-by-Layer Engineered Microbicide Drug Delivery System Targeting HIV-1 gp120: Physicochemical and Biological Properties.

The purpose of this study was to engineer a model anti-HIV microbicide (tenofovir) drug delivery system targeting HIV-1 envelope glycoprotein gp120 (HIV-1 g120) for the prevention of HIV sexual transmission. HIV-1 g120 and mannose responsive particles (MRP) were prepared through the layer-by-layer coating of calcium carbonate (CaCO3) with concanavalin A (Con A) and glycogen. MRP average particle size ranged from 881.7 ± 15.45 nm to 1130 ± 15.72 nm, depending on the number of Con A layers. Tenofovir encapsulation efficiency in CaCO3 was 74.4% with drug loading of 16.3% (w/w). MRP was non-cytotoxic to Lactobacillus crispatus, human vaginal keratinocytes (VK2), and murine macrophage RAW 264.7 cells and did not induce any significant proinflammatory nitric oxide release. Overall, compared to control, no statistically significant increase in proinflammatory cytokine IL-1α, IL-1ß, IL-6, MKC, IL-7, and interferon-γ-inducible protein 10 (IP10) levels was observed. Drug release profiles in the presence of methyl α-d-mannopyranoside and recombinant HIV-1 envelope glycoprotein gp120 followed Hixson-Crowell and Hopfenberg kinetic models, indicative of a surface-eroding system. The one Con A layer containing system was found to be the most sensitive (∼2-fold increase in drug release vs control SFS:VFS) at the lowest HIV gp120 concentration tested (25 µg/mL). Percent mucoadhesion, tested ex vivo on porcine vaginal tissue, ranged from 10% to 21%, depending on the number of Con A layers in the formulation. Collectively, these data suggested that the proposed HIV-1 g120 targeting, using MRP, potentially represent a safe and effective template for vaginal microbicide drug delivery, if future preclinical studies are conclusive.

Surface engineering of Solid Lipid Nanoparticle assemblies by methyl α-d-mannopyranoside for the active targeting to macrophages in anti-tuberculosis inhalation therapy.

This study describes the development of new mannosylated Solid Lipid Nanoparticle assemblies (SLNas) delivering rifampicin for an inhaled treatment of tuberculosis. SLNas were surface engineered with mannose residues to recognize mannose receptors located on infected alveolar macrophages and facilitate cell internalization. Two sets of SLNas were produced by the melt emulsifying technique using biocompatible lipid components, i.e. cholesteryl myristate combined with palmitic acid (PA set) or tripalmitin (TP set), in the presence of the targeting moiety, methyl α-d-mannopyranoside. Mannosylated SLNas were examined for their physical properties, drug payloads and release, as well as respirability in terms of emitted dose and respirable fraction determined by Next Generation Impactor. The most appropriate formulations were assessed for mannosylation using FTIR, XPS, SEM coupled with EDX analysis, and wettability assay, in comparison with the respective non-functionalized SLNas. Besides, cytotoxicity and cell internalization ability were established on J774 murine macrophage cell line. Mannosylated SLNas exhibited physical properties suitable for alveolar macrophage passive targeting, adequate rifampicin payloads (10-15%), and feasible drug maintenance within SLNas along the respiratory tract before macrophage internalization. Despite respirability impaired by powder cohesiveness, surface mannosylation provided quicker macrophage phagocytosis, giving evidence of an active targeting promotion.

Structure and Stability of Carbohydrate-Lipid Interactions. Methylmannose Polysaccharide-Fatty Acid Complexes.

We report a detailed study of the structure and stability of carbohydrate-lipid interactions. Complexes of a methylmannose polysaccharide (MMP) derivative and fatty acids (FAs) served as model systems. The dependence of solution affinities and gas-phase dissociation activation energies (Ea ) on FA length indicates a dominant role of carbohydrate-lipid interactions in stabilizing (MMP+FA) complexes. Solution (1) H NMR results reveal weak interactions between MMP methyl groups and FA acyl chain; MD simulations suggest the complexes are disordered. The contribution of FA methylene groups to the Ea is similar to that of heats of transfer of n-alkanes from the gas phase to polar solvents, thus suggesting that MMP binds lipids through dipole-induced dipole interactions. The MD results point to hydrophobic interactions and H-bonds with the FA carboxyl group. Comparison of collision cross sections of deprotonated (MMP+FA) ions with MD structures suggests that the gaseous complexes are disordered.

Structure of the Glycosyltransferase Ktr4p from Saccharomyces cerevisiae.

In the yeast Saccharomyces cerevisiae, members of the Kre2/Mnt1 protein family have been shown to be α-1,2-mannosyltransferases or α-1,2-mannosylphosphate transferases, utilising an Mn2+-coordinated GDP-mannose as the sugar donor and a variety of mannose derivatives as acceptors. Enzymes in this family are localised to the Golgi apparatus, and have been shown to be involved in both N- and O-linked glycosylation of newly-synthesised proteins, including cell wall glycoproteins. Our knowledge of the nine proteins in this family is however very incomplete at present. Only one family member, Kre2p/Mnt1p, has been studied by structural methods, and three (Ktr4p, Ktr5p, Ktr7p) are completely uncharacterised and remain classified only as putative glycosyltransferases. Here we use in vitro enzyme activity assays to provide experimental confirmation of the predicted glycosyltransferase activity of Ktr4p. Using GDP-mannose as the donor, we observe activity towards the acceptor methyl-α-mannoside, but little or no activity towards mannose or α-1,2-mannobiose. We also present the structure of the lumenal catalytic domain of S. cerevisiae Ktr4p, determined by X-ray crystallography to a resolution of 2.2 Å, and the complex of the enzyme with GDP to 1.9 Å resolution.

Synthesis of mannoheptose derivatives and their evaluation as inhibitors of the lectin LecB from the opportunistic pathogen Pseudomonas aeruginosa.

Biofilm formation and chronic infections with Pseudomonas aeruginosa depend on lectins produced by the bacterium. The bacterial C-type lectin LecB binds to the two monosaccharides l-fucose and d-mannose and conjugates thereof. Previously, d-mannose derivatives with amide and sulfonamide substituents at C6 were reported as potent inhibitors of the bacterial lectin LecB and LecB-mediated bacterial surface adhesion. Because d-mannose establishes a hydrogen bond via its 6-OH group with Ser23 of LecB in the crystal structure and may be beneficial for binding affinity, we extended d-mannose and synthesized mannoheptoses bearing the free 6-OH group as well as amido and sulfonamido-substituents at C7. Two series of diastereomeric mannoheptoses were synthesized and the stereochemistry was determined by X-ray crystallography. The potency of the mannoheptoses as LecB inhibitors was assessed in a competitive binding assay. The data reveal a diastereoselectivity of LecB for (6S)-mannoheptose derivatives with increased activity over methyl α-d-mannoside.

Molecular recognition of methyl α-D-mannopyranoside by antifreeze (glyco)proteins.

Antifreeze proteins and glycoproteins [AF(G)Ps] have been well-known for more than three decades for their ability to inhibit the growth and recrystallization of ice through binding to specific ice crystal faces, and they show remarkable structural compatibility with specific ice crystal faces. Here, we show that the crystal growth faces of methyl α-D-mannopyranoside (MDM), a representative pyranose sugar, also show noteworthy structural compatibility with the known periodicities of AF(G)Ps. We selected fish AFGPs (AFGP8, AFGP1-5), and a beetle AFP (DAFP1) with increasing antifreeze activity as potential additives for controlling MDM crystal growth. Similar to their effects on ice growth, the AF(G)Ps can inhibit MDM crystal growth and recrystallization, and more significantly, the effectiveness for the AF(G)Ps are well correlated with their antifreeze activity. MDM crystals grown in the presence of AF(G)Ps are smaller and have better defined shapes and are of higher quality as indicated by single crystal X-ray diffraction and polarized microscopy than control crystals, but no new polymorphs of MDM were identified by single crystal X-ray diffraction, solid-state NMR, and attenuated total reflectance infrared spectroscopy. The observed changes in the average sizes of the MDM crystals can be related to the changes in the number of the MDM nuclei in the presence of the AF(G)Ps. The critical free energy change differences of the MDM nucleation in the absence and presence of the additives were calculated. These values are close to those of the ice nucleation in the presence of AF(G)Ps suggesting similar interactions are involved in the molecular recognition of MDM by the AF(G)Ps. To our knowledge this is the first report where AF(G)Ps have been used to control crystal growth of carbohydrates and on AFGPs controlling non-ice-like crystals. Our finding suggests MDM might be a possible alternative to ice for studying the detailed mechanism of AF(G)P-crystal interactions. The relationships between AF(G)Ps and carbohydrate binding proteins are also discussed. The structural compatibility between AF(G)Ps and growing crystal faces demonstrated herein adds to the repertoire of molecular recognition by AF(G)Ps, which may have potential applications in the sugar, food, pharmaceutical, and materials industries.

Selective 4,6-O-benzylidene formation of methyl α-D-mannopyranoside using 2,6-dimethylbenzaldehyde.

While methyl α-d-glucopyranosides and α-d-galactopyranosides selectively form 4,6-O-benzylidenes when reacted with excess benzaldehyde in the presence of acid catalyst methyl α-d-mannopyranosides does not exhibit the same selectivity because of the cis-arrangement of the C2 and C3 hydroxyl groups. The selectivity for the 4,6-O-benzylidene is restored by using 2,6-dimethylbenzaldehyde instead of benzaldehyde. In addition the excess 2,6-dimethylbenzaldehyde is easily recovered from the reaction by extraction with petroleum ether and can be reused without further purification. The 2,6-dimethylbenzylidene exhibits properties similar to the unsubstituted benzylidene with regard to chemical synthesis.

Tuneable regioselectivity during the mono-etherification of the 2,3-diol of a mannose derivative.

The paper reports selective mono-etherification of the 2-, and 3-hydroxyl groups of methyl 4,6-O-isopropylidene-α-d-mannopyranoside using tin(II) chloride catalysed reactions of diaryldiazomethanes. By the use of different diazo compounds and the variation of the tin(II) chloride concentration the ether formation can be shifted from over 90% 3-selectivity to over 90% 2-selectivity.

Structural evaluation of a mimicry-recognizing paratope: plasticity in antigen-antibody interactions manifests in molecular mimicry.

Molecular mimicry manifests antagonistically with respect to the specificity of immune recognition. However, it often occurs because different Ags share surface topologies in terms of shape or chemical nature. It also occurs when a flexible paratope accommodates dissimilar Ags by adjusting structural features according to the antigenic epitopes or differential positioning in the Ag combining site. Toward deciphering the structural basis of molecular mimicry, mAb 2D10 was isolated from a maturing immune response elicited against methyl α-d-mannopyranoside and also bound equivalently to a dodecapeptide. The physicochemical evidence of this carbohydrate-peptide mimicry in the case of mAb 2D10 had been established earlier. These studies had strongly suggested direct involvement of a flexible paratope in the observed mimicry. Surprisingly, comparison of the Ag-free structure of single-chain variable fragment 2D10 with those bound to sugar and peptide Ags revealed a conformationally invariant state of the Ab while binding to chemically and structurally disparate Ags. This equivalent binding of the two dissimilar Ags was through mutually independent interactions, demonstrating functional equivalence in the absence of structural correlation. Thus, existence of a multispecific, mature Ab in the secondary immune response was evident, as was the plasticity in the interactions while accommodating topologically diverse Ags. Although our data highlight the structural basis of receptor multispecificity, they also illustrate mechanisms adopted by the immune system to neutralize the escape mutants generated during pathogenic insult.

Solid-state NMR characterization of the molecular conformation in disordered methyl α-L-rhamnofuranoside.

A combination of solid-state (13)C NMR tensor data and DFT computational methods is utilized to predict the conformation in disordered methyl α-L-rhamnofuranoside. This previously uncharacterized solid is found to be crystalline and consists of at least six distinct conformations that exchange on the kHz time scale. A total of 66 model structures were evaluated, and six were identified as being consistent with experimental (13)C NMR data. All feasible structures have very similar carbon and oxygen positions and differ most significantly in OH hydrogen orientations. A concerted rearrangement of OH hydrogens is proposed to account for the observed dynamic disorder. This rearrangement is accompanied by smaller changes in ring conformation and is slow enough to be observed on the NMR time scale due to severe steric crowding among ring substituents. The relatively minor differences in non-hydrogen atom positions in the final structures suggest that characterization of a complete crystal structure by X-ray powder diffraction may be feasible.

Characterizing pilus-mediated adhesion of biofilm-forming E. coli to chemically diverse surfaces using atomic force microscopy.

Biofilms are complex communities of microorganisms living together at an interface. Because biofilms are often associated with contamination and infection, it is critical to understand how bacterial cells adhere to surfaces in the early stages of biofilm formation. Even harmless commensal Escherichia coli naturally forms biofilms in the human digestive tract by adhering to epithelial cells, a trait that presents major concerns in the case of pathogenic E. coli strains. The laboratory strain E. coli ZK1056 provides an intriguing model system for pathogenic E. coli strains because it forms biofilms robustly on a wide range of surfaces.E. coli ZK1056 cells spontaneously form living biofilms on polylysine-coated AFM cantilevers, allowing us to measure quantitatively by AFM the adhesion between native biofilm cells and substrates of our choice. We use these biofilm-covered cantilevers to probe E. coli ZK1056 adhesion to five substrates with distinct and well-characterized surface chemistries, including fluorinated, amine-terminated, and PEG-like monolayers, as well as unmodified silicon wafer and mica. Notably, after only 0-10 s of contact time, the biofilms adhere strongly to fluorinated and amine-terminated monolayers as well as to mica and weakly to "antifouling" PEG monolayers, despite the wide variation in hydrophobicity and charge of these substrates. In each case the AFM retraction curves display distinct adhesion profiles in terms of both force and distance, highlighting the cells' ability to adapt their adhesive properties to disparate surfaces. Specific inhibition of the pilus protein FimH by a nonhydrolyzable mannose analogue leads to diminished adhesion in all cases, demonstrating the critical role of type I pili in adhesion by this strain to surfaces bearing widely different functional groups. The strong and adaptable binding of FimH to diverse surfaces has unexpected implications for the design of antifouling surfaces and antiadhesion therapies.

From mannose to morphan analogues: methyl α-D-mannoside as chiral building block for the synthesis of mono- and bicyclic σ receptor ligands.

Previously the synthesis and high σ(1) receptor affinity of mannose derived pyrans 3-5 with equatorially oriented amino groups have been reported. Herein the synthesis and receptor affinities of the corresponding axially substituted pyrans and oxa-morphans are described. Key step in the diastereoselective synthesis was an S(N)2 substitution of tosylate 10 with NaN(3). Heating of the azide 6 with acid led unexpectedly to the oxa-morphan 13, which showed remarkable affinity toward the σ(1) receptor (K(i)=860 nM). The benzylamine 15α and the dimethylamine 16α were obtained by reduction of the azide 6 and subsequent reductive alkylation. In contrast to the equatorial amines 3-5, the axial amines 15α and 16α did not interact with the σ(1) receptor or another investigated receptor system.

Carbohydrate-lipid interactions: affinities of methylmannose polysaccharides for lipids in aqueous solution.

The interactions between 3-O-methyl-mannose polysaccharides (MMPs), extracted from Mycobacterium smegmatis (consisting of a mixture of MMP-10, -11, -12 and -13) or obtained by chemical synthesis (MMP-5(s), -8(s), -11(s) and -14(s)), and linear saturated and unsaturated fatty acids (FAs), and a commercial mixture of naphthenic acids (NAs) in aqueous solution at 25 °C and pH 8.5 were quantified by electrospray ionization mass spectrometry (ESI-MS). Association constants (K(a)) for MMP binding to four FAs (myristic acid, palmitic acid, stearic acid and trans-parinaric acid) were measured by using an indirect ESI-MS assay, the "proxy protein" method. The K(a) values are in the 10(4)-10(5) M(-1) range and, based on results obtained for the binding of the synthetic MMPs with palmitic acid, increase with the size of the carbohydrate. Notably, the measured affinity of the extracted MMPs for trans-parinaric acid is two orders of magnitude smaller than the reported value, which was determined by using a fluorescence assay. Using a newly developed competitive binding assay, referred to as the "proxy protein/proxy ligand" ESI-MS method, it was shown that MMPs bind specifically to NAs in aqueous solution, with apparent affinities of approximately (5×10(4)) M(-1) for the mixture of NAs tested. This represents the first demonstration that MMPs can bind to hydrophobic species more complex than those containing linear alkyl/alkenyl chains. Moreover, the approach developed here represents a novel method for probing carbohydrate-lipid interactions.

Selective synthesis of 1,6-anhydro-ß-d-mannopyranose and -mannofuranose using microwave-assisted heating.

The dehydration of d-mannose and the demethanolization of methyl-α-d-mannopyranoside (MαMP) or methyl-α-d-mannofuranoside (MαMF) were examined using microwave-assisted heating for a 3-min irradiation at temperature from 120 to 280°C in ordinary or dry sulfolane without any catalyst. The microwave-assisted heating of MαMP and MαMF smoothly proceeded to selectively afford the anhydromannoses, 1,6-anhydro-ß-d-mannopyranose (AMP) and 1,6-anhydro-ß-d-mannofuranose (AMF), respectively, in high yields. For MαMP in ordinary sulfolane at 240°C, AMP was selectively obtained in the AMF:AMP ratio of 4:96, whereas AMF was the major product at the AMF:AMP ratio of 97:3 from MαMF in dry sulfolane at 220°C.

Role played by exosporium glycoproteins in the surface properties of Bacillus cereus spores and in their adhesion to stainless steel.

Bacillus cereus spores are surrounded by a loose-fitting layer called the exosporium, whose distal part is mainly formed from glycoproteins. The role played by the exosporium glycoproteins of B. cereus ATCC 14579 (BclA and ExsH) was investigated by considering hydrophobicity and charge, as well as the properties of spore adhesion to stainless steel. The absence of BclA increased both the isoelectric point (IEP) and hydrophobicity of whole spores while simultaneously reducing the interaction between spores and stainless steel. However, neither the hydrophobicity nor the charge associated with BclA could explain the differences in the adhesion properties. Conversely, ExsH, another exosporium glycoprotein, did not play a significant role in spore surface properties. The monosaccharide analysis of B. cereus ATCC 14579 showed different glycosylation patterns on ExsH and BclA. Moreover, two specific glycosyl residues, namely, 2-O-methyl-rhamnose (2-Me-Rha) and 2,4-O-methyl-rhamnose (2,4-Me-Rha), were attached to BclA, in addition to the glycosyl residues already reported in B. anthracis.