Development of a NiFe2O4 covalent organic framework based magnetic solid-phase extraction approach for specific capture of quinolones in animal innards prior to UHPLC-Q-Orbitrap HRMS detection.

This study aimed to present a selective and effective method for analyzing quinolones (QNs) in food matrix. Herein, a NiFe2O4-based magnetic sodium disulfonate covalent organic framework (NiFe2O4/COF) was prepared using a simple solvent-free grinding method, and was adopted as a selective adsorbent for magnetic solid phase extraction of QNs. Coupled with UHPLC-Q-Orbitrap HRMS, an efficient method for simultaneous detection of 18 kinds of QNs was established. The method exhibited good linearity (0.01-100 ng g-1), high sensitivity (LODs ranging from 0.0011 to 0.0652 ng g-1) and precision (RSDs below 9.5%). Successful extraction of QNs from liver and kidney samples was achieved with satisfactory recoveries ranging from 82.2% to 108.4%. The abundant sulfonate functional groups on NiFe2O4/COF facilitated strong affinity to QNs through electrostatic and hydrogen bonding interactions. The proposed method provides a new idea for the extraction of contaminants with target selectivity.

Nickel-manganese-cobalt tetragonal spinel ternary oxide nanocomposite as an effective adsorbent for dispersive solid phase micro-extraction of cadmium in food and water samples.

Nickel-manganese-cobalt tetragonal spinel ternary oxide nanocomposite (NMC-TSO) was synthesized. It was utilized as an efficient sorbent for the dispersive solid phase microextraction (D-SPµE) without vortexing of cadmium. The analysis of the cadmium was carried out by FAAS. The effective analytical parameters including pH (6) contact times (no vortexing), sample volume (70 mL), eluent volume (3 mL of 2 mol L-1 HCl), linear dynamic ranges (1.07-85.7 µg L-1), and re-useability (33) on the D-SPµE efficiency were investigated. The PF, RSD% and LOD of the D-SPµE for cadmium were 23.3, ≤ 2.8% and 0.49 µg L-1, respectively. The tolerable concentrations of Ca2+, Mg2+, K+ and Na+ on Cd(II) were 50,000 mg L-1, 50,000 mg L-1, 25,000 mg L-1 and 7500 mg L-1, respectively. The method was accurated by analysis of food and water certificate reference materials (NW-TMDA-54.6 Lake water, SPS-WW1 121 Batch wastewater, 1573a Tomato Leaves and TORT-3 Lobster Hepatopancreas) and - recovery experiments. The D-SPµE-FAAS method was applied for the cadmium determination in dam water, wastewater, river water, well water, sea water, tea, cacao, nut, bitter chocolate, rice, leek, cinnamon and parsley.

MOF-derived porous carbon microspheres Ni@C-acid as solid-phase microextraction coating for extraction of polycyclic aromatic hydrocarbons from tea infusions.

The improvement of the stability and adsorption properties of materials on targets in sample pre-treatment has long been an objective. Extensive efforts have been made to achieve this goal. In this work, metal-organic framework Ni-MOF precursors were first synthesized by solvothermal method using polyvinylpyrrolidone (PVP) as an ideal templating agent, stabiliser and nanoparticle dispersant. After carbonization and acid washing, the nanoporous carbon microspheres material (Ni@C-acid) was obtained. Compared with the material without acid treatment (Ni@C), the specific surface area, pore volume, adsorption performance of Ni@C-acid were increased. Thanks to its excellent characteristics (high stability, abundant benzene rings), Ni@C-acid was used as fiber coatings in headspace solid-phase microextraction (HS-SPME) technology for extraction and preconcentration of polycyclic aromatic hydrocarbons (PAHs) prior to gas chromatography-flame ionization detector (GC-FID) analysis. The experimental parameters of extraction temperature, extraction time, agitation speed, desorption temperature, desorption time and sodium chloride (NaCl) concentration were studied. Under optimal experimental conditions, the wide linear range (0.01-30 ng mL-1), the good correlation coefficient (0.9916-0.9984), the low detection limit (0.003-0.011 ng mL-1), and the high enrichment factor (5273-13793) were obtained. The established method was successfully used for the detection of trace PAHs in actual tea infusions samples and satisfied recoveries ranging from 80.94-118.62 % were achieved. The present work provides a simple method for the preparation of highly stable and adsorbable porous carbon microsphere materials with potential applications in the extraction of environmental pollutants.

NiFe-LDH/nylon 6 composite electrospun on polypropylene membrane: A new extractive device development for porous membrane protected micro-solid-phase extraction of organophosphate pesticides from fresh fruit juice samples coupled with liquid chromatography tandem mass analysis.

A unique strategy for developing porous membrane protected micro-solid phase extraction has been provided. An electrospun composite was fabricated on the sheet of membrane. To this end, NiFe-layered double hydroxide/Nylon 6 composite nanofibers were coated on a polypropylene membrane sheet followed by folding into a pocket shape, which were then utilized as a novel extractive device to extract of organophosphorus pesticides from fresh fruit juice samples prior to liquid chromatography-tandem mass spectrometry (LC-MS/MS) analysis. The fabricated hybrid composites were successfully characterized. The effective parameters on extraction performance were investigated. LODs were 0.020-0.065 ng mL-1. Excellent linearity (R2≥0.996) was observed between 0.05 and 100.0 ng mL-1. RSDs% were in the range of 3.1-5.8% (intra-day, n = 3) and 2.6-5.5% (inter-day, n = 3×3). Satisfactory related recovery values within the acceptable range of 90.7-111.2% with RSDs% below 6.7% were achieved for the analysis of real samples.

Chemo-enzymatic functionalized sustainable cellulosic membranes: Impact of regional selectivity on ions capture and antifouling behavior.

Most of the polymeric membranes synthesized for decentralization of polluted water use fossil-based components. Thus, there is an urgent need to create robust and tunable nano/micro materials for confidently designing efficient and selective polymeric water filters with guaranteed sustainability. We have chosen a robust high-grade microfibrillated cellulose (MFC) as the functional material and selectively tuned it via enzymatic catalysis, which led to the attachment of phosphate group at the C6 position, followed by esterification (fatty acid attachment at C2 and C3 carbon), which led to the increase in its antifouling properties. We have demonstrated the robustness of the functionalization by measuring the separation of various metal ions, and the antifouling properties by adding foulants, such as Bovine Serum Albumin (BSA) and cancerous cells to the test solutions. These prototype affinity MFC membranes represent the most promising type of next-generation high-performance filtration devices for a more sustainable society.

Cancer Influences the Elemental Composition of the Myocardium More Strongly than Conjugated Linoleic Acids-Chemometric Approach to Cardio-Oncological Studies.

The aim of the study was to verify in a cardio-oncological model experiment if conjugated linoleic acids (CLA) fed to rats with mammary tumors affect the content of selected macro- and microelements in their myocardium. The diet of Sprague-Dawley females was supplemented either with CLA isomers or with safflower oil. In hearts of rats suffering from breast cancer, selected elements were analyzed with a quadrupole mass spectrometer with inductively coupled plasma ionization (ICP-MS). In order to better understand the data trends, cluster analysis, principal component analysis and linear discriminant analysis were applied. Mammary tumors influenced macro- and microelements content in the myocardium to a greater extent than applied diet supplementation. Significant influences of diet (p = 0.0192), mammary tumors (p = 0.0200) and interactions of both factors (p = 0.0151) were documented in terms of Fe content. CLA significantly decreased the contents of Cu and Mn (p = 0.0158 and p = 0.0265, respectively). The level of Ni was significantly higher (p = 0.0073), which was more pronounced in groups supplemented with CLA. The obtained results confirmed antioxidant properties of CLA and the relationship with Se deposition. Chemometric techniques distinctly showed that the coexisting pathological process induced differences to the greater extent than diet supplementation in the elemental content in the myocardium, which may impinge on cardiac tissue's susceptibility to injuries.

Highly selective removal and recovery of Ni(II) from aqueous solution using magnetic ion-imprinted chitosan nanoparticles.

Nickel (Ni) is one of the most common heavy metals. In this study, nano-sized magnetic ion-imprinted polymers (MIIPs) were synthesized using chitosan as the functional monomer, and used for selective adsorption and recovery of Ni(II) from solutions. The results showed MIIPs possessed high sorption selectivity for Ni(II), and the change in pH (5.0-9.0) exerted insignificant influence on the ion adsorption, allowing almost complete elution and recovery of adsorbed Ni(II) ions by using 0.5% EDTA-Na solution. Moreover, the sorption capacity of the recycled MIIPs decreased by only about 10% after 15 adsorption-desorption cycles. The time required for establishing the adsorption equilibrium was less than 1 h. The sorption process was predominant and endothermic, and could be well described by both Langmuir isotherm model and pseudo-second-order kinetic model. Therefore, the synthesized MIIPs was a suitable adsorbent for highly selective, fast and efficient removal and recovery of low-concentration Ni(II) ions from wastewaters.

Bioleaching of copper and nickel from mobile phone printed circuit board using Aspergillus fumigatus A2DS.

The recovery of metals from electronic waste was investigated by using fungal strain Aspergillus fumigatus A2DS, isolated from the mining industry wastewater. Fifty-seven percent of copper and 32% of nickel were leached (analyzed by Inductively Coupled Plasma Atomic Emission Spectroscopy (ICP-OES)) by the organism after one-step leaching at a temperature of 30 °C (shaking condition for 7 days). Maximum % of copper and nickel were obtained at a pH of 6 (58.7% Cu and 32% Ni), the temperature of 40 °C (61.8% Cu and 27.07% Ni), a pulp density of 0.5% (62% Cu and 42.37% Ni), and inoculums of 1% (58% Cu and 32.29% Ni). The XRD pattern of PCB showed 77.6% of copper containing compounds. XRD analysis of the leachate residue showed only 23.2% Euchorite (ASCu2H7O8) and 9.4% other copper containing compounds, indicating the leaching property of the fungus. HPLC analysis of the spent medium showed the presence of different acids like citric, succinic, and fumaric acid. The FTIR spectrum showed a decrease in carboxylic stretching in the leachate produced after bioleaching using spent medium. ICPOES of the leachate obtained using spent medium showed that 61% of the copper and 35% of nickel were leached out after seven days of incubation at shaking condition and 57% of copper and 32.8% of nickel at static condition confirming acidolysis property of the strain. A. fumigatus A2DS metal absorption and adsorption ability were observed using transmission electron microscopy (TEM) and scanning electron microscopy energy dispersive X-ray (SEM-EDX) respectively. The results thus indicate that bioleaching of Cu and Ni is bioleached by A. fumigatus A2DS.

Preconcentrations of Ni(II) and Pb(II) from water and food samples by solid-phase extraction using Pleurotus ostreatus immobilized iron oxide nanoparticles.

The present study explores the biosorption potential of Pleurotus ostreatus immobilized magnetic iron oxide nanoparticles for solid-phase extractions of Ni(II) and Pb(II) ions from the water and food samples. It was characterized using FTIR, FE-SEM/EDX before and after analyte ions biosorption. Important operational parameters including the effect of initial pH, the flow rate of the sample solution and volume, amount of biomass and support material, interfering ions, best eluent, column reusability were studied. The biosorption capacities of fungus immobilized iron oxide nanoparticles were found as 28.6 and 32.1 mg g-1 for Ni(II) and Pb(II), respectively. The limit of detection (LOD) and limit of quantitation (LOQ) were achieved as 0.019 and 0.062 ng mL-1 for Ni(II), 0.041 and 0.14 ng mL-1 for Pb(II), respectively. The proposed method was validated by applying to certified reference materials and successfully applied for the preconcentrations of Ni(II) and Pb(II) ions from water and food samples by ICP-OES.

Bioprocessing optimization for efficient simultaneous removal of methylene blue and nickel by Gracilaria seaweed biomass.

The pollution of water by heavy metal ions and dyes, particularly from industrial effluents, has become a global environmental issue. Therefore, the treatment of wastewater generated from different industrial wastes is essential to restore environmental quality. The efficiency of Gracilaria seaweed biomass as a sustainable biosorbent for simultaneous bioremoval of Ni2+ and methylene blue from aqueous solution was studied. Optimization of the biosorption process parameters was performed using face-centered central composite design (FCCCD). The highest bioremoval percentages of Ni2+ and methylene blue were 97.53% and 94.86%; respectively, obtained under optimum experimental conditions: 6 g/L Gracilaria biomass, initial pH 8, 20 mg/L of methylene blue, 150 mg/L of Ni2+ and 180 min of contact time. Fourier Transform Infrared Spectroscopy (FTIR) spectra demonstrated the presence of methyl, alkynes, amide, phenolic, carbonyl, nitrile and phosphate groups which are important binding sites involved in Ni2+ and methylene blue biosorption process. SEM analysis reveals the appearance of shiny large particles and layers on the biosorbent surface after biosorption that are absent before the biosorption process. In conclusion, it is demonstrated that the Gracilaria seaweed biomass is a promising, biodegradable, ecofriendly, cost-effective and efficient biosorbent for simultaneous bioremoval of Ni2+ and methylene blue from wastewater effluents.

Smart and functional polyelectrolyte complex hydrogel composed of salecan and chitosan lactate as superadsorbent for decontamination of nickel ions.

Green and functional bio based adsorbents based on naturally derived polysaccharides have attracted considerable interest owing to their non-toxicity, biodegradability, flexible design, and wide origins. Here, smart polyelectrolyte complex (PEC SC1-SC4) hydrogels were developed by self-assembling of different ratios of salecan and chitosan lactate (CL) for clean-up of nickel ion (Ni2+) from wastewater. Preparation process was rapid and eco-friendly, without any toxic cross-linkers. The electrostatic attractions between polysaccharides were studied by FT-IR, XRD, XPS, and TGA. Particularly, the content of salecan and CL could be precisely modulated to tailor the swelling ability, micromorphology, and stiffness of the hydrogels. Ni2+ adsorption onto the hydrogels was dependent on salecan/CL ratio, pH, initial ion concentration, and contact time. SC4 showed the highest Ni2+ uptake, but it was too brittle. SC3 was selected for absorption studies. The equilibrium adsorption data commendably matched the pseudo-second-order and Langmuir models, demonstrating monolayer chemical adsorption mechanisms. The maximum Ni2+ adsorption derived from Langmuir model was 414.9 mg/g, superior to many reported Ni2+ adsorbents. Most strikingly, SC3 performed good recyclability, and the adsorption capacity still kept 95.3% even after five adsorption/desorption cycles. Hopefully, the prepared SC3 hydrogel is a potential agent for treatment of wastewater contaminated with Ni2+ ion.

Recovery of Lanthanum(III) and Nickel(II) Ions from Acidic Solutions by the Highly Effective Ion Exchanger.

The recovery of La(III) and Ni(II) ions by a macroporous cation exchanger in sodium form (Lewatit Monoplus SP112) has been studied in batch experiments under varying HNO3 concentrations (0.2-2.0 mol/dm3), La(III) and Ni(II) concentrations (25-200 mg/dm3), phase contact time (1-360 min), temperature (293-333 K), and resin mass (0.1-0.5 g). The experimental data revealed that the sorption process was dependent on all parameters used. The maximum sorption capacities were found at CHNO3 = 0.2 mol/dm3, m = 0.1 g, and T = 333 K. The kinetic data indicate that the sorption followed the pseudo-second order and film diffusion models. The sorption equilibrium time was reached at approximately 30 and 60 min for La(III) and Ni(II) ions, respectively. The equilibrium isotherm data were best fitted with the Langmuir model. The maximum monolayer capacities of Lewatit Monoplus SP112 were equal to 95.34 and 60.81 mg/g for La(III) and Ni(II) ions, respectively. The thermodynamic parameters showed that the sorption process was endothermic and spontaneous. Moreover, dynamic experiments were performed using the columns set. The resin regeneration was made using HCl and HNO3 solutions, and the desorption results exhibited effective regeneration. The ATR/FT-IR and XPS spectroscopy results indicated that the La(III) and Ni(II) ions were coordinated with the sulfonate groups.

A Comparative Study on Cu2+, Zn2+, Ni2+, Fe3+, and Cr3+ Metal Ions Removal from Industrial Wastewaters by Chitosan-Based Composite Cryogels.

Materials coming from renewable resources have drawn recently an increased attention in various applications as an eco-friendly alternative in the synthesis of novel functional materials. Polysaccharides, with their prominent representative - chitosan (CS), are well-known for their sorption properties, being able to remove metal ions from dilute solutions either by electrostatic interactions or chelation. In this context, we proposed here a comparative study on Cu2+, Zn2+, Ni2+, Fe3+, and Cr3+ metal ions removal from industrial wastewaters by CS-based composite cryogels using batch technique. The composite cryogels consisting of CS embedding a natural zeolite, namely clinoptilolite, were synthesized by cryogelation, and their sorption performance were compared to those of CS cryogels and of acid-activated zeolite. A deeper analysis of thermodynamics and kinetics sorption data was performed to get insights into the sorption mechanism of all metal ions onto sorbents. Based on the optimized sorption conditions, the removal of the above-mentioned ions from aqueous solutions by the composite sorbent using dynamic technique was also evaluated.

Resistance, removal, and bioaccumulation of Ni (II) and Co (II) and their impacts on antioxidant enzymes of Anoxybacillus mongoliensis.

In this study, it was hypothesis that A. mongoliensis could be used as bioindicator for Ni (II) and Co (II). Thus, Ni (II) and Co (II) resistance, removal, bioaccumulation, and the impacts of them on antioxidant enzyme systems of thermophilic Anoxybacillus mongoliensis were investigated in details. The bioaccumulation of Ni (II) and Co (II) on the cell membrane of thermophilic A. mongoliensis, variations on surface macrostructure and functionality by FT-IR and SEM, and determination of antioxidant enzyme activities were also tested. The highest bioaccumulation values of Co (II) and Ni (II) were detected as 102.0 mg metal/g of dry bacteria at 10 mg/L for the 12th h and 90.4 mg metal/g of dry bacteria for the 24th h, respectively, and the highest Ni (II) and Co (II) cell membrane bioaccumulation capacities of A. mongoliensis were determined as 268.5 and 274.9 mg metal/g wet membrane, respectively at the 24th h. In addition, increasing on SOD and CAT activities were observed on depend of concentration of Ni (II) and Co (II) with respect to control. The antioxidant enzyme activity results also indicated that A. mongoliensis might be used as a bioindicator for Ni (II) and Co (II) pollution in environmental water specimens.

Usage of the newly synthesized poly(3-hydroxy butyrate)-b-poly(vinyl benzyl xanthate) block copolymer for vortex-assisted solid-phase microextraction of cobalt (II) and nickel (II) in canned foodstuffs.

The current research article was reported the synthesis of a novel poly(3-hydroxy butyrate)-b-poly(vinyl benzyl xanthate) block copolymer (PHB-Xa) for vortex-assisted solid-phase microextraction of cobalt(II) and nickel(II) from canned foodstuffs prior to their determinations by flame atomic absorption spectrometry. The block copolymer was synthesized and characterized by nuclear magnetic resonance spectroscopy and Fourier transform infrared spectroscopy. Experimental variables affecting the extraction efficiency of the copolymer were optimized. Since the PHB-Xa block copolymers have a high π conjugate structure and hydrophobicity, the use of this adsorbent yielded quantitative results for the extraction of Ni(II) and Co(II). After optimization, the linearities for Ni(II) and Co(II) were 0.05-80 ng mL-1 and 0.2-100 ng mL-1, respectively. The limits of detection and the limits of quantification were in the range of 0.015-0.06 ng mL-1 and 0.05-0.2 ng mL-1, respectively. The method was successfully applied to determination of Ni(II) and Co(II) in canned foodstuffs prepared by microwave digestion.

Biotechnological Applications of Paenibacillus sp. D9 Lipopeptide Biosurfactant Produced in Low-cost Substrates.

The present study assesses the Paenibacillus sp. D9 lipopeptide biosurfactant synthesis in cheap substrates including functional properties and applicability for varying biotechnological processes. Different experimental setups were made for oil dispersion, heavy metals removals from contaminated environments, and washing performance. The study revealed surface tension activities of 31.7-32.7 mN/m, and maximum biosurfactant yield of more than 8 g/L. Removals of 85.90%, 98.68%, 99.97%, 63.28%, 99.93%, and 94.22% were obtained for Ca, Cu, Fe, Mg, Ni, and Zn, respectively from acid mine effluents. In comparison with chemical surfactants, there was pronounced removal of heavy metals from wastewater, contaminated sands, and vegetable matter, as well as improved oil dispersing activity. A comparative study revealed that biosurfactant was more efficient (> 60%) for removal of tomato sauce and coffee stains than chemical surfactants (< 50%). Thus, lipopeptide biosurfactants are green biomolecules reducing hazards and contaminations within the environment. The future use of this lipopeptide biosurfactant is greatly promising in biotechnology.

EDTA-enhanced electrokinetic remediation of aged electroplating contaminated soil assisted by combining dual cation-exchange membranes and circulation methods.

This paper introduces a novel method for ethylenediaminetetraacetic acid (EDTA)-enhanced electrokinetic (EK) remediation by combining dual cation-exchange membranes and circulation methods for an aged electroplating soil contaminated by chrome (Cr), copper (Cu), and nickel (Ni). Three laboratory-scale EK experiments were carried out, including T1, the traditional EK process; T2, the traditional EDTA-enhanced EK process; and T3, the assisted EDTA-enhanced EK process. The results obtained show that removal of Cu and Ni in T3 was 3-10 times higher than after T1 and T2. However, the removal of Cr (total) was small in all experiments because of the high content of Cr(III). T3 eliminated the metal accumulation problem that existed for T1 and T2. Simultaneously, the highly acidified area (pH < 4) was reduced from 80% in T1 and T2 to only 20% in T3. The results obtained in T3 indicate that the chelating effect of EDTA has a greater ability to dissolve oxidizable Cu and Ni in the soil than the acidification effect. Toxicity evaluation confirmed that the soil treated by T3 presented a lower effect on a luminescent bacterium (Photobacterium phosphoreum T3) because soil pH tended to be more neutral after this treatment. This research provides a novel method for removing heavy metals from soil in a more environmentally friendly way and clarifies the cause of the existing problems of low removal efficiency and high accumulation in the traditional EK process.

Optimization of process using carboxymethyl chitosan for the removal of mixed heavy metals from aqueous streams.

This paper highlights the efficacy of carboxymethyl chitosan (CMCh), a bio-degradable water-soluble derivative of chitosan for the separation of a mixture of heavy metal ions such as copper, nickel, zinc and lead from aqueous streams, as they constitute, the major industrial pollutants present in wastewater. The experimental studies are conducted using commercially available ultrafiltration module using synthetic solutions of the contaminants. The design of experiments was performed by Response Surface Methodology (RSM) with split-plot D-optimal design. Parametric studies were carried out using initial pH of the feed solution, loading ratio (P/M) and initial metal ion concentration to assess the percentage rejection and recovery of metal ions. The maximum percentage rejection of Cu(II), Ni(II), Zn(II) and Pb(II) with CMCh were found to be 100%, 100%, 95%, and 98% respectively under optimum conditions. Subsequently the metal ions were recovered collectively by reversing the pH to 2. The results show that CMCh could be an effective size enhancing species for the removal and recovery of mixture of metals by SEUF.

Multi-component adsorption of Pb(II), Cd(II) and Ni(II) onto microwave-functionalized cellulose: Kinetics, isotherms, thermodynamics, mechanisms and application for electroplating wastewater purification.

Herein, microwave-functionalized cellulose derived from rice husk was cost-effectively prepared and employed for Pb(II), Cd(II) and Ni(II) elimination in mono- and multi-component systems. Benefiting from microwave irradiation, the functionalized process was achieved in 6.5 min and the resultant RHMW-X possessed remarkably high adsorption capacities of 295.20 mg/g for Pb(II), 151.51 mg/g for Cd(II) and 72.80 mg/g for Ni(II) within the equilibrium time of 30 min. Noticeably, the metal ions adsorption rate and capacity in binary and ternary systems were lower than that of unary systems. The coexistence of Cd(II) and Ni(II) significantly slowed down the Pb(II) adsorption in binary and ternary systems, while Pb(II) exhibited the most obvious influence on the metal ions uptake in the multi-component systems. FT-IR and XPS results revealed that both ion exchange and chelation were functioned in the metal ions uptake, while physical interaction was also involved in the adsorption process. Moreover, the RHMW-X possessed favorable recyclability with slight adsorption efficiency decline during five cycles in different systems. Particularly, the RHMW-X could effectively purify actual industrial wastewater containing Pb(II), Cd(II) and Ni(II) for meeting regulatory requirements. This work facilitates the omnidirectional improvement of adsorbents for the de-pollution of practical heavy metals wastewater.

Biorecovery of cobalt and nickel using biomass-free culture supernatants from Aspergillus niger.

In this research, the capabilities of culture supernatants generated by the oxalate-producing fungus Aspergillus niger for the bioprecipitation and biorecovery of cobalt and nickel were investigated, as was the influence of extracellular polymeric substances (EPS) on these processes. The removal of cobalt from solution was >90% for all tested Co concentrations: maximal nickel recovery was >80%. Energy-dispersive X-ray analysis (EDXA) and X-ray diffraction (XRD) confirmed the formation of cobalt and nickel oxalate. In a mixture of cobalt and nickel, cobalt oxalate appeared to predominate precipitation and was dependent on the mixture ratios of the two metals. The presence of EPS together with oxalate in solution decreased the recovery of nickel but did not influence the recovery of cobalt. Concentrations of extracellular protein showed a significant decrease after precipitation while no significant difference was found for extracellular polysaccharide concentrations before and after oxalate precipitation. These results showed that extracellular protein rather than extracellular polysaccharide played a more important role in influencing the biorecovery of metal oxalates from solution. Excitation-emission matrix (EEM) fluorescence spectroscopy showed that aromatic protein-like and hydrophobic acid-like substances from the EPS complexed with cobalt but did not for nickel. The humic acid-like substances from the EPS showed a higher affinity for cobalt than for nickel.