Nafcillin degradation by heterogeneous electro-Fenton process using Fe, Cu and Fe/Cu nanoparticles.

Heterogeneous electro-Fenton (HEF) is as an alternative to the conventional electro-Fenton (EF) process. HEF uses a solid phase catalyst, whereas EF employs a solubilized one. This implies that in HEF, material can be recovered through a simple separation process such as filtration or magnetic separation in HEF. HEF also has the advantage of not requires a previous pH adjustment, which facilitates working in a higher pH range. In this work, Fe, Cu and Fe/Cu bimetallic nanoparticles (Fe/Cu NPs) were synthesized, characterized and used for the degradation of Nafcillin (NAF). The effect of the adsorption and the anodic oxidation (AO-H2O2) process was tested to assess their influence on HEF. NAF adsorption did not exceed 24% of antibiotic removal and the AO-H2O2 process eliminated the total NAF after 240 min of electrolysis. Through the HEF process, the antibiotic was completely removed using Fe/Cu NPs after 7.0 min of electrolysis, while these NPs, mineralization reached 41% after 240 min. In this case, NAF degradation occurs mainly due to the generation of hydroxyl radicals in the BDD electrode, and the Fenton reaction with Fe and Cu NPs. The main organic intermediates produced during the degradation of NAF by HEF were identified allowing the proposal of degradation pathway. Finally, the antibiotic was also completely eliminated from a wastewater from slaughterhouse after 15 min of treatment by HEF and using Fe/Cu bimetallic NPs.

Controlled release of nafcillin using biocompatible "dummy" molecularly imprinted sol-gel nanospheres.

Different silicon-based xero-gel molecularly imprinted spheres in the nano boundary range with recognition capabilities for nafcillin have been synthesised, using tetraethylorthosilicate (TEOS) and (3- aminopropyl) triethoxysilane (APTEOS) as precursors. Imprinting has been achieved using both nafcillin (NAF) or structural analogous 'dummies' such as (+)-6-aminopenicillenic acid (APA), or ampicillin ((+)-6- aminobenzylpenicillin)sodium salt (AMP). Materials were fully characterized using ATR-FTIR, (29)Si solidstate NMR, TGA, TEM and BET. Adsorption isotherms for all the materials fit with a continuous Freundlich model with correlation coefficients better than 0.988 and mean affinity constants between 10(5) and 10(6) L·mol(-1). The use of 'dummies' as well as the template itself in the imprinting process resulted in materials with different release speed. Combinations of these materials allow designing mixtures with a continuous, controlled and constant release longer than four days. Thus, the non-imprinted and the AMP-imprinted material have a rapid release during the first five hours, nafcillin and APA imprinted ones release antibiotic mainly after a latency-period of 24 hours.

Molecularly imprinted sol-gel materials for medical applications.

The present review deals with the sol-gel imprinting of both drug and non-drug templates of medical relevance, namely neurotransmitters, biomarkers, hormones, proteins and cells. Nearly a hundred recent works, either developmental or applied in a medical-related context, were critically analyzed. It may be concluded that, although research is still at an early stage, the potential of these sol-gel materials was well demonstrated in a few applications of critical interest for medicinal/biomedical science. The vast room left for expansion and improvement envisages a continuously growing interest by researchers in the future, eventually resulting in important medical applications able to enter the professional and consumer medical markets.

Tolerability of cefazolin after immune-mediated hypersensitivity reactions to nafcillin in the outpatient setting.

The objective of the present study was to assess the safety and tolerability of cefazolin therapy among patients with methicillin-sensitive Gram-positive bacterial infections who develop non-IgE-mediated hypersensitivity reactions (HSRs) to nafcillin. In this retrospective cohort analysis of the Outpatient Parenteral Antimicrobial Therapy program at the Massachusetts General Hospital from 2007 through 2013, we identified patients switched from nafcillin to cefazolin after an immune-mediated HSR. We reviewed patient demographics, details about the original HSR, and outcomes after the switch to cefazolin therapy. HSRs were classified by reaction type and likely mechanism. There were 467 patients treated with nafcillin, of which 60 (12.8%) were switched to cefazolin during their prescribed course. Of the 60 patients who transitioned to cefazolin, 17 (28.3%) were switched because of non-IgE-mediated HSRs. HSRs included maculopapular rash (n = 10), immune-mediated nephritis (n = 3), isolated eosinophilia (n = 2), immune-mediated hepatitis (n = 1), and a serum sickness-like reaction (n = 1). All but one patient (94.1%) who switched to cefazolin tolerated the drug with resolution of the HSR and completed their therapy with cefazolin. No patient experienced worsening of their rash or progressive organ dysfunction. With appropriate monitoring, therapy with cefazolin after non-IgE-mediated HSRs to nafcillin appears to be safe.

Nafcillin-loaded PLGA nanoparticles for treatment of osteomyelitis.

The goal of this investigation is to develop poly(DL-lactide-co-glycolide) (PLGA) nanoparticles for the delivery of antibiotics such as nafcillin to osteoblasts. This is important in order to treat Staphylococcus aureus-mediated osteomyelitis. The latter is often chronic and highly resistant to antibiotics. Nafcillin (a penicillinase-resistant penicillin)-loaded nanoparticles were prepared by a single emulsion/solvent evaporation method. In vitro drug release studies were conducted in an incubator shaker at 37 degrees C in phosphate buffer saline. Drug loading and release were determined by UV-Vis spectroscopy. A viability study was conducted in S. aureus-infected mouse osteoblasts. In vitro release study showed an initial burst release and a second phase of slow release. Following 24 and 48 h of incubation, all formulations of nanoparticles loaded with nafcillin either killed or significantly reduced all of the intracellular bacteria. Our data demonstrate that effective killing of intracellular S. aureus is possible by treating the infected osteoblasts with nanoparticles loaded with nafcillin.

Role of surface adsorption and porosity features in the molecular recognition ability of imprinted sol-gels.

Organically modified molecularly imprinted silicas (MIS) for nafcillin recognition were prepared using a simple sol-gel procedure. Molecular recognition of the template was observed by tuning the chemical and structural properties of the MIS. The relative amounts of organically modified alkoxysilane precursors were found to be key in the textural and morphological characteristics of the MIS as well as for developing an imprinting effect in the materials. The recognition properties of the imprinted materials were found to be strongly influenced by the hydrolytic stability of the alkoxysilanes and their inductive effects during sol-gel hydrolysis/condensation stages. The concept was to combine properties of organic groups with those of glass-like materials in order to develop synergetic properties through variations in the composition. Results from batch rebinding experiments as well as from the thorough study of the N(2) adsorption properties and the textural and structural characteristics of the MIS revealed that an imprint effect could be attributed to the presence of the template during the synthesis of MIS.

Pharmaceutical liquid crystals: the relevance of partially ordered systems.

Pharmaceutical solids have generally been characterized as either three-dimensional crystals or amorphous solids based on X-ray powder diffraction and modulated temperature differential scanning calorimetry. In contrast, fewer examples of thermotropic and lyotropic liquid crystals, or mesophases, appear in the pharmaceutical literature, and that literature teaches that the aforementioned analytical techniques should be complemented with polarized light microscopy and small-angle X-ray scattering in order to effectively identify potential liquid crystalline states. Lyotropic liquid crystals are induced by the presence of solvent, and have been extensively described elsewhere in the context of emulsion technology; however, other pharmaceutical examples are emerging. Thermotropic liquid crystals are induced by a change in temperature and are essentially free of solvent, where more pharmaceutical applications appear in the literature. In the present review the general structural characteristics that favor the formation of liquid crystalline mesophases are categorized by therapeutic target and molecular size, and the analytical means of their identification are presented.

Adsorption of an amphiphilic penicillin onto human serum albumin: characterisation of the complex.

The complex formed by the interaction of the amphiphilic penicillin drug nafcillin and human serum albumin (HSA) in water at 25 degrees C has been characterised using a range of physicochemical techniques. Measurements of the solution conductivity and the electrophoretic mobility of the complexes have shown an ionic adsorption of the drug on the protein surface leading to a surface saturation at a nafcillin concentration of 0.012 mmol kg(-1) and subsequent formation of drug micelles in solutions of higher nafcillin concentration. Measurements of the size of the complex and the thickness of the adsorbed layer by static and dynamic light scattering have shown a gradual change in hydrodynamic radius of the complex with increasing drug concentration typical of a saturation rather than a denaturation process, the magnitude of the change being insufficient to account for any appreciable extension or unfolding of the HSA molecule. The interaction potential between the HSA/nafcillin complexes, and the stability of the complexes were determined from the dependence of diffusion coefficients on protein concentration by application of the DLVO colloidal stability theory. The results indicate decreasing stability of the colloidal dispersion of the drug/protein complexes with an increase in the concentration of added drug.

Characterization of phase transitions during freeze-drying by in situ X-ray powder diffractometry.

The purpose of this research was to develop the technique of in situ freeze-drying in the sample chamber of an X-ray powder diffractometer (XRD) and to monitor the phase transitions during the freeze-drying of aqueous solutions of sodium nafcillin (I) and mannitol (II). Aqueous solutions of I and II were frozen under controlled conditions in the sample chamber of an XRD. This variable temperature XRD was modified so that the sample chamber could be evacuated and the samples dried under reduced pressures. Thus the entire freeze-drying cycle was carried out in the XRD holder and the solid-state was monitored during the various stages of the process. Frozen solutions of I when annealed at -4 degrees C, resulted in crystallization of the solute as 'sodium nafcillin hydrate' (unknown stoichiometry). Primary drying at -10 degrees C, resulted in partial dehydration to a poorly crystalline sodium nafcillin hemihydrate. There was no crystallization of mannitol when solutions of II were cooled and subjected to primary drying at -50 degrees C. During the drying, the intensities of the characteristic X-ray lines of ice (d-spacings of 3.94, 3.70 and 3.48 A) were quantified. This enabled real time monitoring of the complete sublimation of crystalline ice. When the secondary drying was carried out at -25 degrees C, mannitol crystallized as an anhydrous mixture of the delta- and beta-polymorphs. In a second set of experiments, the frozen solutions were warmed to -25 degrees C and subjected to primary drying. Mannitol crystallized and its XRD pattern matched that of mannitol hydrate reported recently (Yu et al., Pharm. Res., 14S (1997) S-445). When the secondary drying was carried out at -10 degrees C, there was no change in the XRD pattern suggesting the formation of a dehydrated hydrate. This in situ XRD technique enabled us to characterize the phase transitions during freeze-drying. It would be useful in developing a mechanistic understanding of the alterations in the solid-state during freeze-drying of complex, multi-component, pharmaceutical systems.

Characterization of frozen aqueous solutions by low temperature X-ray powder diffractometry.

PURPOSE: A low temperature X-ray powder diffractometric (XRD) technique has been developed which permits in situ characterization of the solid-state of solutes in frozen aqueous solutions. METHODS: A variable temperature stage, with a working temperature range of -190 to 300 degrees C, was attached to a wide-angle XRD. The stage was calibrated with a sodium chloride-water binary system. RESULTS: When aqueous nafcillin sodium solution (22% w/w) was frozen, eutectic crystallization of the solute was not observed. However, annealing at -4 degrees C, caused crystallization of the solute. With increasing annealing time, there was a progressive increase in the crystallinity of the solute. Studies were carried out with sodium nafcillin solutions ranging in concentration from 20 to 50% w/w. The solid-state of the phase crystallizing from solution was independent of the solute concentration. Next, solutions of mono- and disodium hydrogen phosphate were individually frozen. Only the latter crystallized as the dodecahydrate (Na2HPO4.12H2O). However when an aqueous buffer mixture of mono- and disodium hydrogen phosphate was frozen, the former inhibited the crystallization of the latter. CONCLUSIONS: Since freezing of solutions is the first step in lyophilization, the XRD technique can provide a mechanistic understanding of the alterations in solid-state that occur during freeze-drying. DSC has so far been the technique of choice to study frozen systems. The advantage of XRD is that it not only permits unambiguous identification of the crystalline solid phase(s), but it also provides information about the degree of crystallinity. While overlapping thermal events are difficult to interpret in DSC, XRD does not suffer from such a limitation.

The physical state of nafcillin sodium in frozen aqueous solutions and freeze-dried powders.

The purpose of this study was to develop a better understanding of the physical chemistry of freeze drying of lyotropic liquid crystals using nafcillin sodium as a model solute. Solutions and freeze-dried powders of nafcillin sodium were studied by polarized light microscopy, differential scanning calorimetry, x-ray powder diffraction, and water vapor adsorption. Differential scanning calorimetry thermograms of nafcillin sodium solutions contain a melting endotherm at approximately -5.5 degrees C and, depending on the concentration and heating rate, a crystallization exotherm immediately after this endotherm followed by the melting endotherm of ice. When the sample is annealed at -4 degrees C, both the endotherm and exotherm are eliminated, and a new endotherm appears at approximately -1 degree C on the shoulder of the ice-melting endotherm. The data are interpreted as melting of a liquid crystalline phase, followed by crystallization. X-ray powder diffractograms of unannealed freeze-dried nafcillin sodium are consistent with a lamellar liquid crystal. Diffractograms of annealed freeze-dried nafcillin sodium indicate crystalline material which is a different crystal form than the monohydrate starting material. Moisture adsorption isotherms of the freeze-dried annealed (crystalline) and unannealed (liquid crystalline) nafcillin sodium show different affinities for moisture compared to the crystalline starting material. Solid-state stability data demonstrate that the freeze-dried liquid crystalline form of nafcillin sodium is much less stable than the freeze-dried crystal-line material. The literature recognizes two types of solute behavior on freezing, where the solute either crystallizes from the freeze concentrate or remains amorphous. Lyotropic liquid crystal formation during freezing represents a separate category of freezing behavior, the physical chemistry of which is worthy of further investigation.