Evaluation of the release of nickel and titanium under orthodontic treatment.

The metal alloys used in dentistry are made mainly of nickel (Ni), titanium (Ti), and other elements such as molybdenum (Mo), zirconium (Zr), iron (Fe), tin (Sn), chrome (Cr), carbon (C), copper (Cu) and niobium (Nb) which can release metal ions in unstable environments. The aim of this work was determine the salivary pH before and during orthodontic treatment; evaluate the release of metal ions, mainly Ni and Ti, in urine and saliva using Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES); and evaluate the corrosion using Scanning Electronic Microscopy (SEM). In this study, we selected 35 individuals under orthodontic treatment, from whom saliva and urine samples were collected in 3 stages: (a) basal, (b) at 3 and (c) 6 months after the placement of the fixed appliances. SEM analyzed the Ni-Ti (0.016″) and stainless steel (SS) (0.016 × 0.022″) archs after 1 month of being in contact with the oral cavity. Statistical analysis was performed with Stata using the ANOVA model of repeated measures with a p < 0.05. A statistically significant difference in the concentration of Ni in saliva were found between 3 and 6 months of intervention and Ti in urine was found 3 and 6 months.

In vivo evaluation of interactions between biphasic calcium phosphate (BCP)-niobium pentoxide (Nb2O5) nanocomposite and tissues using a rat critical-size calvarial defect model.

Natural or synthetic biomaterials are increasingly being used to support bone tissue repair or substitution. The combination of natural calcium phosphates with biocompatible alloys is an important route towards the development of new biomaterials with bioperformance and mechanical responses to mimic those of human bones. This article evaluated the structural, physical, mechanical and biological properties of a new mechanical improved nanocomposite elaborated by association of fish biphasic calcium phosphate (BCP) and niobium pentoxide (Nb2O5). The nanocomposite (Nb-BCP) and the pure BCP, used as a positive control, were obtained by powder metallurgy. The density, porosity and microhardness were measured. The structural analysis was determined by X-ray diffraction (XRD) and the biological properties were studied in histological sections of critical size calvaria defects in rats, 7, 15, 30, 45 and 60 days after implantation of disks of both materials. Morphological description was made after scanning electron microscopy (SEM) and optical microscopy analysis. After sintering, the Nb-BCP nanocomposite presented four crystalline phases: 34.36% calcium niobate (CaNb2O6), 21.68% phosphorus niobium oxide (PNb9O25), 42.55% ß-tricalcium phosphate (Ca3(PO4)2) and 1.31% of niobium pentoxide (Nb2O5) and exhibited increases of 17% in density, 66% in Vickers microhardness and 180% in compressive strength compared to pure BCP. In vivo study, showed biocompatibility, bioactivity and osteoconductivity similar to pure BCP. SEM showed the formation of globular accretions over the implanted nanocomposites, representing one of the stages of bone mineralization. In conclusion, the BCP and Nb2O5 formed a nanocomposite exhibiting characteristics that are desirable for a biomaterial, such as bioperformance, higher ß-TCP percentage and improved physical and mechanical properties compared to pure BCP. These characteristics demonstrate the promise of this material for supporting bone regeneration.

Ability of a wash regimen to remove biofilm from the exposed surface of materials used in osseointegrated implants.

The skin/implant interface of osseointegrated (OI) implants is susceptible to infection, causing excess pain, increased morbidity, and possibly implant removal. Novel distal femoral OI implants with binary nitride coatings have been developed with little physiological modeling to collect microbiological evidence of resistance to bacterial attachment. This in vitro study evaluated a Ti-6Al-4V alloy coated with TiNbN and treated with low plasticity burnishing (LPB) to assess attachment and biofilm formation of methicillin-resistant Staphylococcus aureus (MRSA) under physiologically modeling conditions compared to standard Ti-6Al-4V alloy materials with a polished ("Color Buff") or non-polished finish ("Satin Finish"). Washability of the materials were also assessed and compared. It was hypothesized that the TiNbN/LPB treatments would resist bacterial adhesion and biofilm formation to a greater degree than the other two materials, and have a higher degree of bacterial removal following a clinically relevant wash regimen. Material types were exposed to a constant flow of broth containing MRSA and were analyzed using bacterial quantification, surface coverage analysis, and SEM imaging. Quantification data showed no difference in bacterial attachment among the varying material types both with and without the wash regimen. Surface coverage and SEM analysis confirmed results. The wash regimen led to an approximately 3 log10 reduction in bacteria for all material types. Though the results did not support the hypothesis that a TiNbN coating/LPB treatment might resist bacterial attachment/biofilm formation more than other alloys, or have less bacteria after cleaning, results did support the potential importance of a daily wound-hygiene regimen at the skin/implant interface of OI materials. Published 2018. This article is a U.S. Government work and is in the public domain in the USA.

Functional Studies of Anodic Oxidized ß-Ti-28Nb-11Ta-8Zr Alloy for Mechanical, In-vitro and Antibacterial Capability.

We developed an osseocompatible ß-type Ti-28Nb-11Ta-8Zr (TNTZ) alloy that displays the excellent elastic modulus, cellular response, corrosion resistance and antibacterial capability demanded for bone-mimetic materials. The TNTZ alloy exhibited an elastic modulus of 49 GPa, which approximates that of human bones and prevent stress shielding effects. A further anodic oxidation and subsequent post-annealing modification formed a crystalline nanoporous TNTZ oxide layer (NPTNTZO(c)) on the alloy surface, potentially promoting interlocking with the extracellular matrix of bone cells and cell proliferation. Osteoblast viability tests also verified that NPTNTZO(c) enhanced cell growth more significantly than that of flat TNTZ. In addition, potentiodynamic polarization tests in Hanks' balanced salt solution (HBSS) revealed that both TNTZ and NPTNTZO(c) exhibited better corrosion resistance than commercial pure titanium. Finally, NPTNTZO(c) reinforced with silver nanoparticles (NPTNTZO

A Two-Dimensional Biodegradable Niobium Carbide (MXene) for Photothermal Tumor Eradication in NIR-I and NIR-II Biowindows.

Conventionally, ceramics-based materials, fabricated by high-temperature solid-phase reaction and sintering, are preferred as bone scaffolds in hard-tissue engineering because of their tunable biocompatibility and mechanical properties. However, their possible biomedical applications have rarely been considered, especially the cancer phototherapeutic applications in both the first and second near-infrared light (NIR-I and NIR-II) biowindows. In this work, we explore, for the first time as far as we know, a novel kind of 2D niobium carbide (Nb2C), MXene, with highly efficient in vivo photothermal ablation of mouse tumor xenografts in both NIR-I and NIR-II windows. The 2D Nb2C nanosheets (NSs) were fabricated by a facile and scalable two-step liquid exfoliation method combining stepwise delamination and intercalation procedures. The ultrathin, lateral-nanosized Nb2C NSs exhibited extraordinarily high photothermal conversion efficiency (36.4% at NIR-I and 45.65% at NIR-II), as well as high photothermal stability. The Nb2C NSs intrinsically feature unique enzyme-responsive biodegradability to human myeloperoxidase, low phototoxicity, and high biocompatibility. Especially, these surface-engineered Nb2C NSs present highly efficient in vivo photothermal ablation and eradication of tumor in both NIR-I and NIR-II biowindows. This work significantly broadens the application prospects of 2D MXenes by rationally designing their compositions and exploring related physiochemical properties, especially on phototherapy of cancer.

Tumour cell death induced by the bulk photovoltaic effect of LiNbO3:Fe under visible light irradiation.

This work reports a pioneer application of the bulk photovoltaic effect in the biomedical field. Massive necrotic cell death was induced in human tumour cell cultures grown on a bulk photovoltaic material (iron-doped lithium niobate, LiNbO(3):Fe) after irradiation with visible light. Lethal doses (≈100% cell death) were obtained with low-intensity visible light sources (10-100 mW cm(-2) irradiances) and short exposure times of the order of minutes. The wavelength dependence to induce the lethal effect observed is consistent with that corresponding to the bulk photovoltaic effect generation in LiNbO(3):Fe. Necrosis also occurred when cultured tumour cells were exposed to LiNbO(3):Fe microparticles and visible light.

Antitumor activity of ionic niobocene and molybdenocene complexes in high oxidation states.

Four air-stable niobocene complexes [(C5H5)2NbCl2]+X- with X = BF4, AsF6, SbF6, SO3CF3 and the molybdenocene derivative [(C5H5)2MoCl2]2+[SbF6]2- were investigated for antitumor properties against Ehrlich ascites tumor in female CF1 mice. All compounds are new, salt-like complexes containing a cationic metallocene moiety, where the early transition metals niobium and molybdenum in the high oxidation states +5 and +6 function as central atoms. The niobocene complexes containing tetrafluoroborate (BF4-) or trifluoromethanesulfonate (CF3SO3-) as anions only induced a maximal cure rate of 50% and led to increases in life span of 182% and 178% following application of optimal doses. The other two niobocene compounds with hexafluoroarsenate (AsF6-) and hexafluoroantimonate (SbF6-) as anions and the molybdenocene derivative [(C5H5)2MoCl2]2+[SbF6]2- effected a maximal cure rate of 100% and increases in life span of 346%, 376%, and 332%, respectively, determined on the key date, i.e., on day 90 after transplantation. On applying the niobocene hexafluoroantimonate complex [(C5H5)2NbCl2] +[SbF6]-, the optimal dose range with a cure rate of 100% was rather broad and extended from 20 mg/kg to 40 mg/kg. Correspondingly, the value of the therapeutic index (TI) was high and amounted to 7.2. In the case of the niobocene hexafluoroarsenate and the molybdenocene hexafluoroantimonate complexes, the TI value decreased to 5.3 and 2.6 respectively. Neither impairments of the general condition nor any conspicuous symptoms could be detected after application of therapeutic doses of the five compounds investigated. Compared to the neutral niobocene dichloro complex [(C5H5)2NbCl2], the therapeutic range of the ionic niobocene derivative [(C5H5)2NbCl2]+[SbF6]- was broadened, the TI value markedly elevated from 2.9 to 7.2, and the toxic symptoms were impressively reduced. The niobocene hexafluoroantimonate complex was the most effective compound investigated in the present study.

Niobium filters for dose reduction in pediatric radiology.

The performance of a niobium filter, with K-edge at 19 keV, and a copper filter have been studied concerning absorbed dose, image quality and tube loading. Absorbed doses were measured with TLD. To evaluate image quality a perspex phantom with image quality test objects was used. In comparison with a conventional filter made of copper no significant advantage was obtained with the niobium filter.