Articular Fragment Detachment and Separate Fixation for the Treatment of Comminuted Patellar Fractures with Coronal Split Articular Fragments: Articular Detachment Technique.

Background: Treatment of comminuted patellar fractures accompanied by coronal split articular and inferior pole fragments is a challenge. To treat this difficult fracture, we perform articular fragment detachment and separate fixation for coronal split articular and inferior pole fragments. We aimed to evaluate the radiological and clinical outcomes of our technique in comminuted patellar fractures at least 1 year after surgery. Methods: Between January 2019 and June 2022, 15 patients diagnosed with comminuted patellar fractures accompanied by coronal split articular and inferior pole fragments based on preoperative computed tomography underwent surgery using the articular detachment technique. The key point of this technique was anatomical reduction and subchondral fixation of the coronal split articular fragment to the superior main fragment after complete detachment of the coronal split fragment from the inferior pole. The remaining inferior pole was fixed using a separate construct. Postoperative articular gap, articular step-off, and complications, including resorption, reduction loss, and avascular necrosis of fixed articular fragments, were evaluated as radiological outcomes. Range of motion and the Lysholm scores were used to evaluate clinical outcomes. Results: Among the 15 patients, the coronal split articular fragments were fixed using Kirschner wires in 13 patients and headless screws in 2 patients. The inferior poles were fixed using separate vertical wiring in 13 patients and tension-band wiring in 2 patients. A postoperative articular gap was noted in 7 patients, with an average articular gap of 1.0 mm (range, 0.7-1.6 mm). No articular step-off was observed. Bone union and normal range of motion were achieved in all patients. On the 1-year postoperative lateral radiograph, resorption of the articular fracture site was seen in 5 patients. There was no loss of reduction or avascular necrosis of the coronal split articular fragments. The average postoperative Lysholm score at 1 year was 89.3 ± 4.1 (range, 82-95). Conclusions: The technique would be a reliable and safe option for the surgical treatment of comminuted patellar fractures accompanied by coronal split articular and inferior pole fragments in terms of anatomical reduction and stable fixation of articular fragments without risk of avascular necrosis.

Deep learning-based automatic measurement system for patellar height: a multicenter retrospective study.

BACKGROUND: The patellar height index is important; however, the measurement procedures are time-consuming and prone to significant variability among and within observers. We developed a deep learning-based automatic measurement system for the patellar height and evaluated its performance and generalization ability to accurately measure the patellar height index. METHODS: We developed a dataset containing 3,923 lateral knee X-ray images. Notably, all X-ray images were from three tertiary level A hospitals, and 2,341 cases were included in the analysis after screening. By manually labeling key points, the model was trained using the residual network (ResNet) and high-resolution network (HRNet) for human pose estimation architectures to measure the patellar height index. Various data enhancement techniques were used to enhance the robustness of the model. The root mean square error (RMSE), object keypoint similarity (OKS), and percentage of correct keypoint (PCK) metrics were used to evaluate the training results. In addition, we used the intraclass correlation coefficient (ICC) to assess the consistency between manual and automatic measurements. RESULTS: The HRNet model performed excellently in keypoint detection tasks by comparing different deep learning models. Furthermore, the pose_hrnet_w48 model was particularly outstanding in the RMSE, OKS, and PCK metrics, and the Insall-Salvati index (ISI) automatically calculated by this model was also highly consistent with the manual measurements (intraclass correlation coefficient [ICC], 0.809-0.885). This evidence demonstrates the accuracy and generalizability of this deep learning system in practical applications. CONCLUSION: We successfully developed a deep learning-based automatic measurement system for the patellar height. The system demonstrated accuracy comparable to that of experienced radiologists and a strong generalizability across different datasets. It provides an essential tool for assessing and treating knee diseases early and monitoring and rehabilitation after knee surgery. Due to the potential bias in the selection of datasets in this study, different datasets should be examined in the future to optimize the model so that it can be reliably applied in clinical practice. TRIAL REGISTRATION: The study was registered at the Medical Research Registration and Filing Information System (medicalresearch.org.cn) MR-61-23-013065. Date of registration: May 04, 2023 (retrospectively registered).

Serial Change in Patellar Height after Tension Band Wiring of Patellar Fractures.

Background and Objectives: Patella baja is a common complication after operative treatment for patellar fracture. This study aimed to investigate (1) the serial changes in patellar height and (2) the potential predictive factors for patellar height changes after tension band wiring (TBW) for patellar fractures. Materials and Methods: Forty-one patients who underwent TBW for patellar fracture between March 2019 and September 2022 were enrolled. To identify serial changes in patellar height, modified Blackburne-Peel index (mBPI) was assessed at just after surgery, at 3 months, at 6 months, at 1 year and at the final follow-up. Multiple regression analysis was conducted to identify factors correlated with mBPI difference between the contralateral side (considered as preoperative status) and injured side. Results: The postoperative mBPI exhibited a decline over time (mean mBPI immediately post operation/3 months/6 months/1 year/final follow-up: 0.69/0.63/0.63/0.62/0.61) Specifically, mBPI showed a significant reduction immediately post operation to 3 months (p < 0.001), although comparisons at other time points did not reveal significant differences. A lower position of the fracture was associated with a decrease in patellar height after surgery. Conclusions: Patellar height was mainly decreased from immediately post operation to 3 months. A fracture in a lower position of associated with decreased patellar height after the TBW of the transverse patellar fracture.

A Sensorized 3D-Printed Knee Test Rig for Preliminary Experimental Validation of Patellar Tracking and Contact Simulation.

Experimental validation of computational simulations is important because it provides empirical evidence to verify the accuracy and reliability of the simulated results. This validation ensures that the simulation accurately represents real-world phenomena, increasing confidence in the model's predictive capabilities and its applicability to practical scenarios. The use of musculoskeletal models in orthopedic surgery allows for objective prediction of postoperative function and optimization of results for each patient. To ensure that simulations are trustworthy and can be used for predictive purposes, comparing simulation results with experimental data is crucial. Although progress has been made in obtaining 3D bone geometry and estimating contact forces, validation of these predictions has been limited due to the lack of direct in vivo measurements and the economic and ethical constraints associated with available alternatives. In this study, an existing commercial surgical training station was transformed into a sensorized test bench to replicate a knee subject to a total knee replacement. The original knee inserts of the training station were replaced with personalized 3D-printed bones incorporating their corresponding implants, and multiple sensors with their respective supports were added. The recorded movement of the patella was used in combination with the forces recorded by the pressure sensor and the load cells, to validate the results obtained from the simulation, which was performed by means of a multibody dynamics formulation implemented in a custom-developed library. The utilization of 3D-printed models and sensors facilitated cost-effective and replicable experimental validation of computational simulations, thereby advancing orthopedic surgery while circumventing ethical concerns.

Patellar Instability: Imaging Findings.

Patellofemoral instability results from impaired engagement of the patella in the trochlear groove at the start of flexion and may lead to pain and lateral patellar dislocation. It occurs most frequently in adolescents and young adults during sporting activities. Trochlear dysplasia, patella alta, and excessive lateralization of the tibial tuberosity are the most common risk factors for patellar instability. The main role of imaging is to depict and assess these anatomical factors and highlight features indicating previous lateral dislocation of the patella.

IMPORTANCE OF JOINT LINE RESTORATION IN TOTAL KNEE ARTHROPLASTY.

The restoration of the joint line is important for a good functional outcome after a Total Knee Arthroplasty(TKA). Knee joint biomechanics need to be restored as near normal as possible. Joint line elevation leads to anterior knee pain, decrease in range of motion, patella baja ,mid-flexion instability and impingement of patellar tendon. Joint line depression on the other hand leads to patella alta, risk of patellar subluxation and mid-flexion instability of the knee. Various studies have demonstrated various range of acceptable joint line variation but there is no clear acceptable range of joint line variation. More studies are required for establishing the acceptable range of joint line variation and standard practices should be established for arthroplasty surgeons for preventing variation of joint line.

Evaluation of the relationship between the anatomical characteristics of the vastus medialis obliquus muscle and the patella chondral lesion occurrence.

OBJECTIVES: The study aims to investigate the relationship between the vastus medialis obliquus (VMO) muscle distal insertion features and patellar chondral lesion presence. PATIENTS AND METHODS: This cross-sectional study included a total of 100 patients (18 males, 82 females, mean age 67.2±7.1 years; range, 50 to 86 years) who underwent total knee arthroplasty (TKA). Radiological assessments, including merchant view and standing orthoroentgenograms, were conducted. The current osteoarthritis stage, varus angle, quadriceps angle (Q angle), patella-patellar tendon angle (P-PT angle), congruence angle, and sulcus angle were calculated. The VMO tendon length, muscle fiber angle, tendon insertion width measurements, and patellar chondral lesion localization data were obtained intraoperatively. Grouping was done according to the distal insertion width of the VMO tendon to the medial edge of the patella. The medial rim of the patella was divided into three equal-sized sectors. The first group (Group 1, n=31) consisted of patients who had an insertion from the quadriceps tendon into the upper one-third of the patella. The second group (Group 1, n=48) consisted of patients with a distal insertion expanding into the middle one-third of the patella. The third group (Group 3, n=21) consisted of patients who had a distal insertion extending into the distal third region of the medial patella margin. The patella joint surface was divided into sectors, and the presence and location of cartilage lesions were noted in detail. RESULTS: The mean tendon insertion width rate was 45.99±16.886% (range, 16.7 to 83.3%). The mean muscle fiber insertion angle was 51.85±11.67º (range, 20º to 80º). The mean tendon length was 12.45±3.289 (range, 4 to 20) mm. There was no significant difference between the mean age, weight, height, body mass index, BMI, fiber angle, tendon length, varus angle, Q angle, sulcus angle, and congruence angle data among the groups. In terms of the P-PT angle, Groups 1 and 2 had a significant relationship (p=0.008). No relationship was found between the mean fiber insertion angle, mean tendon length, or the presence of chondral lesions. There was a statistically significant difference among the groups regarding the presence of chondral lesions. The highest percentage of chondral lesion frequency was observed in Group 3 (95.24%), followed by Group 1 (90.3%) and Group 2 (89.6%), respectively. Compared to the other two groups, Group 3 had a higher average ratio of lesion areas per patient. CONCLUSION: Our study results demonstrate that the formation and localization of the patellar chondral lesions are affected by the insertion width type of the VMO muscle into the patella. Group 2-type insertion is associated with a lower lesion frequency rate than Groups 1 and 3.

A new and simple method for patellar height measurement: Fibula-condyle-patella angle.

OBJECTIVES: This study aims to evaluate the inter-observer reliability of fibula-condyle-patella angle measurements and to compare it with other measurement techniques. PATIENTS AND METHODS: Between January 01, 2023 and January 31, 2023, a total of 108 patients (20 males, 88 females; mean age: 47.5±12.0 years; range, 18 to 72 years) who underwent X-rays using the fibula-condyle-patella angle, Insall-Salvati, Caton-Deschamps, Blackburne-Pell, and plateau-patella angle (PPA) methods were retrospectively analyzed. Knee lateral radiographs taken in at least 30 degrees of flexion and appropriate rotation were scanned. All measurements were made by two orthopedic surgeons who were blinded to measurement methods. RESULTS: Right knee patellar height measurements were conducted in 56 patients, while left knee patellar heights were assessed in 52 patients. The highest inter-observer concordance was found in the fibula-condyle-patella angle. The second highest concordance was found in the Insall-Salvati. The highest concordance correlation was found with PPA in the measurements of both researchers. CONCLUSION: The fibula-condyle-patella angle is a reliable technique with a good inter-observer reliability for measuring patellar height. We believe that this study will inspire future research to establish comprehensive reference values for clinical applications.

Management of complete intra-articular distal femur and patellar fractures in an achondroplastic young adult; small is challenging' revisited: a case-report.

BACKGROUND: People with achondroplasia exhibit distinct physical characteristics, but their cognitive abilities remain within the normal range. The challenges encountered during surgical procedures and perioperative care for achondroplastic individuals, are underrepresented in the existing literature. CASE PRESENTATION: In this report, the management of a 26-year-old North-African achondroplastic male is highlighted. The patient suffered a complete intra-articular distal femur fracture (AO/OTA 33-C1) and an ipsilateral patella fracture (AO/OTA 34-C1). The patient's unusual anatomical variations and the lack of suitable orthopedic implants posed significant surgical challenges, particularly in the context of a resource-limited developing country. Facial and spinal deformities, which are common in patients with achondroplasia, further complicated the anesthetic approach. CONCLUSIONS: The limited information on operative management of fractures in achondroplastic patients necessitated independent decision-making and diverging from the convenient approach where clear guidance is available in the literature.

Relationship Between Prepatellar Fat Thickness and Bone Mineral Density.

OBJECTIVE: To evaluate the relationship between bone mineral density (BMD) by measuring the prepatellar fat thickness with knee radiography and to gain a measurement method that has not been done before in the literature. STUDY DESIGN: Cross-sectional descriptive study. Place and Duration of the Study: Department of Physical Medicine and Rehabilitation, Training and Research Hospital, Sanliurfa, Turkiye, between January and June 2020. METHODOLOGY: Patients' age, body mass index (BMI) data, prepatellar fat thickness (mm), L1-L4 total, bone mineral density femoral neck, femur trochanter major, and femur total T scores were recorded. The relationships between these three groups (normal, osteopenia, osteoporosis) and between prepatellar fat tissue measurement were evaluated. One-way analysis of variance (ANOVA) and Post Hoc Tukey tests were used in the analysis. RESULTS:  A statistically significant difference was found in terms of trochanter major T score measurements (X2 = 20.435; p <0.001) and BMI (X2 = 66.535; p <0.001) measurements of prepatellar fat thickness measurement. A statistically significant difference was found between the three groups in terms of prepatellar fat thickness measurement, L1-4 T-score, femoral neck, and femur total values (p <0.001). CONCLUSION:  Prepatellar fat thickness in postmenopausal Turkish women was positively correlated with BMD; BMD increases as the prepatellar fat thickness increases. This explains that perapatellar fat thickness creates a mechanical load on the bones and causes an increase in BMD. KEY WORDS: Osteoporosis, Fat thickness, Bone mineral density.

Tension band versus locking plate fixation for patella fractures - a protocol of a randomised controlled trial.

INTRODUCTION: Following surgical management of patella fractures, patients commonly report pain; difficulties with weight-bearing tasks such as walking, running and climbing stairs; and restrictions in quality of life. Recently, a locking plate system for surgical management of patella fractures has been introduced. To date, no studies have compared standard treatment with tension band wiring with locking plate fixation in a randomised study design. We aim to compare the one-year patient-reported Knee Injury and Osteoarthritis Outcome subscale scores (KOOS5-subscales) after standard care tension band fixation with locking plate fixation for patients with patella fractures. METHODS: This is a multicentre randomised and prospective clinical trial. A total of 122 patients will be included in the study, and the primary outcome will be the KOOS subscales at 12 months after surgery. CONCLUSIONS: Findings from the present study are expected to advance our understanding of outcome following surgical treatment of patella fractures. FUNDING: This study is funded, in part, by the Novo Nordisk Foundation, Denmark. CLINICALTRIALS: gov ID: NCT04891549.

Study on the therapeutic effect of Kirschner wire tension band combined with anchor cross-stitch technique in the treatment of comminuted patellar inferopolar fractures.

PURPOSES: Fractures of the inferior patellar pole, unlike other patellar fractures, present challenges for traditional surgical fixation methods. This article introduces the clinical technique and outcomes of using Kirschner wire tension band combined with anchor screw cross-stitch fixation for comminuted inferior patellar pole fractures. METHODS: This retrospective case series study included 14 patients with comminuted inferior patellar pole fractures treated at our institution from September 1, 2020, to April 30, 2022. All patients underwent surgery using the Kirschner wire tension band with anchor screw cross-stitch technique. Follow-up assessments involved postoperative X-rays to evaluate fracture healing, as well as clinical parameters such as healing time, Visual Analog Scale (VAS) scores, range of motion (ROM), and Bostman scores. RESULTS: All patients were followed for an average of over 12 months, with no cases of internal fixation failure. Knee joint stability and function were excellent. X-rays revealed an average healing time of approximately 10.79 ± 1.53 weeks, hospitalization lasted 5.64 ± 1.15 days, surgery took approximately 37.86 ± 5.32 minutes, and intraoperative blood loss was 33.29 ± 8.15 ml. One patient experienced irritation from the internal fixation material. At the final follow-up, the Bostman score averaged 28.29 ± 0.83, knee joint flexion reached 131.07° ± 4.88°, all patients achieved full knee extension, and the VAS score was 0.36 ± 0.63. CONCLUSION: Kirschner wire tension band with anchor screw cross-stitch fixation for comminuted inferior patellar pole fractures delivered satisfactory clinical outcomes. This surgical method, characterized by its simplicity and reliability, is a valuable addition to clinical practice.

Effect of soft tissue tension around the knee joint on medio-lateral patellar position.

Patellofemoral pain (PFP) is one of the most common sports injuries of the knee joint and has a high persistence and recurrence rate. Medio-lateral patellar position in the knee extension position during contraction is associated with PFP. However, soft tissue tension that most influences the medio-lateral patellar position in the knee extension position during contraction in vivo is unclear. We aimed to clarify the relationship between medio-lateral patellar position and soft tissue tension around the knee joint. Twelve patients with PFP and 20 healthy participants were included. Medio-lateral patellar position and tension of the rectus femoris, vastus lateralis (VL), vastus medialis, iliotibial band (ITB), lateral patellofemoral ligament, and medial patellofemoral ligament were measured during contraction and rest. The tensions of the VL and ITB during contraction and the medio-lateral patellar position at rest were significantly associated with medio-lateral patellar position during contraction (ß = 0.449, 0.354, and 0.393, respectively). In addition, the tension of ITB was significantly associated with the medio-lateral patellar position at rest (ß = 0.646). These relationships were not affected by the presence of PFP. These findings suggest that the patellar position during contraction became more lateral as the tension in the VL and ITB increased, regardless of the presence of PFP. These results may facilitate the prevention and treatment of PFP.

Sensitivity to change and responsiveness of provocative load tests among athletes with patellar tendinopathy.

BACKGROUND: Pain provocation tests are recommended for assessing pain severity and as an outcome measure for individuals with patellar tendinopathy. OBJECTIVE: To evaluate floor and ceiling effects, sensitivity to change, and responsiveness cut-offs of two provocative load tests among athletes with patellar tendinopathy. METHODS: Athletes (N = 41) performed six repetitions for the single leg decline squat (SLDS) and resisted knee extension (KE) at baseline and 12 weeks. Participants rated their pain during each test on a visual analog scale (VAS). Sensitivity to change was assessed by calculating effect size (ES) and the standardized response mean (SRM). The responsiveness cut-offs were assessed using a combination of anchor and distribution- based methods to determine the minimal clinically important difference (MCID) for each test. RESULTS: A floor or ceiling effect was observed in only a small number of participants for both tests except for KE, for which approximately one third of participants had a floor effect at week 12. There was higher sensitivity to change for SLDS (ES: 1.93/SRM: 1.43) compared with KE (ES:0.96/SRM: 1.09). The MCID corresponded to a decrease of 1.6 points for SLDS and 1.0 for KE, while the distribution-based method estimated 1.2 points for SLDS and 1.1 for KE. CONCLUSION: This study found moderate to high sensitivity to change and established MCID values for the SLDS and KE test in athletes with patellar tendinopathy before and after rehabilitation. Both tests may be useful as pain on loading outcomes as athletes progress with their rehabilitation, but the KE test results in higher floor effects and has lower sensitivity to change.

Transverse patella fracture fixation: A cadaveric biomechanical comparison of cannulated screws and anterior tension band versus low-profile, multiplanar mesh plating.

INTRODUCTION: Multiplanar mesh plating of patella fractures has become more popular in recent years. It was the goal of this study to compare the biomechanical stability of cannulated screw with anterior tension band to multiplanar mesh plating for fixation of transverse patella fractures in cadaver specimens. MATERIALS AND METHODS: Eight matched pairs of fresh frozen cadaveric knees were obtained and soft tissues dissected leaving the extensor mechanism, joint capsule, and retinaculum intact. Transverse fractures were created at the mid-portion of the patella. For each pair, one specimen was repaired using cannulated screws with anterior tension band, and the second was repaired using multiplanar mesh plating. Each specimen underwent cyclic extension loading with loads increasing by 1.1 kg after every 50 cycles. Interfragmentary displacement was measured at the end of each interval at both 5° and 45° of knee flexion angle, with fixation failure defined by >2 mm displacement. RESULTS: The specimens fixed with multiplanar mesh plating survived more cycles and higher loads than the specimens fixed with cannulated screws with anterior tension band (p = 0.011 comparing survival plots). After 150 cycles of extension loading, 3 of 8 of the specimens fixed with screws/tension band had failed, whereas none of the mesh plated specimens had failed. After 400 cycles, 7 of 8 of the screws/tension band had failed, whereas half of the mesh plated specimens had failed. CONCLUSIONS: While a more technically challenging and expensive technique, mesh plating for patella fractures appears to offer greater durability than traditional cannulated screw with tension banding.

Patellar osteochondritis dissecans: maturation-dependent patellofemoral joint characteristics.

BACKGROUND: The likelihood of healing of osteochondritis dissecans decreases with skeletal maturity and there are theories that abnormal biomechanical forces contribute to the development and progression of these lesions. OBJECTIVE: To characterize, according to regional skeletal maturity, the morphology and alignment indices of the patellofemoral joint on MRI in patients with patellar osteochondritis dissecans. MATERIALS AND METHODS: MRI examinations of patients with patellar osteochondritis dissecans obtained between January 2008 and May 2023 were retrospectively reviewed to determine regional skeletal maturity, osteochondritis dissecans lesion size and location, patellar and trochlear morphology (Wiberg/Dejour classifications), and to calculate trochlear sulcus angles, trochlear depth index, lateral trochlear inclination, Insall-Salvati index, Caton-Deschamps index, patellar tendon-lateral trochlear ridge, and tibial tubercle-trochlear groove distances. Values were compared between skeletally immature and mature groups. RESULTS: Sixty-eight children (22 girls, 46 boys, age: 14.0 ± 1.7 years) yielded 74 knees with patellar osteochondritis dissecans lesions, 14 (19%) of which were skeletally mature. The most common anatomic location was over the central patella [median ridge (34/74 - 46%) on the axial images and over the middle third (45/74 - 61%) on the sagittal images]. Overall, mean trochlear sulcus angle (high, 151 ± 11°), trochlear depth index (low, 2.8 ± 1.4 mm), and Insall-Salvati index (borderline, 1.3 ± 0.1) were abnormal for the entire sample. Skeletally mature knees were significantly more likely to have higher (more dysplastic) Dejour types when compared to skeletally immature knees (p < 0.01). Knees in the mature group, compared to immature, had significantly more abnormal mean lateral trochlear inclination (15 ± 8° vs. 19 ± 6°, p = 0.03) and patellar tendon-lateral trochlear ridge distance (5.55 ± 4.31 mm vs. 2.89 ± 4.69 mm, p = 0.04). Half of the knees had ≥ 4 abnormal features that predispose to patellofemoral maltracking; mature knees were significantly (p = 0.02) more likely to have a higher number of abnormal features (> 6 features, 7/14, 50.0%) versus immature knees (0-3 features, 33/60, 55.0%). CONCLUSION: In children with patellar osteochondritis dissecans, abnormal patellofemoral morphology and alignment indices were common in all patients and more severe in mature knees.

Outcome of surgical correction of medial patellar luxation in dogs weighing less than 10 kg.

BACKGROUND: Various trochleoplasty techniques, including trochlear wedge recession (TWR) and trochlear block recession (TBR), are used to treat dogs with medial patellar luxation (MPL). However, the objective outcomes of these surgical procedures are underreported. METHODS: Medical records were obtained for dogs weighing less than 10 kg that underwent either TWR or TBR and tibial tuberosity transposition to address grade I-III MPL. Long-term (at least 1 year after the last procedure) follow-up included orthopaedic and radiographic examinations, such as osteoarthritis score (OAS), ground reaction force (GRF) analysis and canine brief pain inventory (CBPI). RESULTS: Overall, 20 dogs (26 stifles) were followed up in the long term. Minor postoperative complications, medial patellar reluxation (MPR) and intermittent lameness occurred in 46.15%, 19.23% and 15% of the dogs, respectively. MPR occurred only in TWR-treated stifles, while mean OAS increased in all groups. Using the CBPI, the owners perceived an excellent or very good outcome in 95% of dogs. LIMITATIONS: The limitations of the study include its retrospective observational nature, a lack of randomisation and a small sample size. CONCLUSION: Surgical treatment resulted in a favourable outcome. GRF analysis could detect subtle differences in weight bearing in dogs treated for MPL, which might not be apparent clinically. There might be a higher risk for reluxation for TWR. However, a larger-scale prospective study would be required to find which treatment is superior.

Changes in Patellar Height and Tibial Posterior Slope after Biplanar High Tibial Osteotomy with Computer-Designed Personalized Surgical Guides: A Retrospective Study.

OBJECTIVE: Medial opening-wedge high tibial osteotomy (MOWHTO) is a surgical procedure to treat medial compartment osteoarthritis in the knee with varus deformity. However, factors such as patellar height (PH) and the sagittal plane's posterior tibial slope angle (PTSA) are potentially overlooked. This study investigated the impact of alignment correction angle guided by computer-designed personalized surgical guide plate (PSGP) in MOWHTO on PH and PTSA, offering insights for enhancing surgical techniques. METHODS: This retrospective study included patients who underwent 3D-printed PSGP-assisted MOWHTO at our institution from March to September 2022. The paired t-tests assessed differences in all preoperative and postoperative measurement parameters. Multivariate linear regression analysis examined correlations between PTSA, CDI (Caton-Deschamps Index), and the alignment correction magnitude. Receiver operating characteristic (ROC) curve analysis determined the threshold of the correction angle, calculating sensitivity, specificity, and area under the curve. RESULTS: A total of 107 patients were included in our study. The CDI changed from a preoperative mean of 0.97 ± 0.13 (range 0.70-1.34) to a postoperative mean of 0.82 ± 0.13 (range 0.55-1.20). PTSA changed from a preoperative mean of 8.54 ± 2.67 (range 2.19-17.55) to a postoperative mean of 10.54 ± 3.05 (range 4.48-18.05). The t-test revealed statistically significant changes in both values (p < 0.05). A significant alteration in patellar height occurred when the correction angle exceeded 9.39°. Moreover, this paper illustrates a negative correlation between CDI change and the correction angle and preoperative PTSA. Holding other factors constant, each 1-degree increase in the correction angle led to a 0.017 decrease in postoperative CDI, and each 1-degree increase in preoperative PTSA resulted in a 0.008 decrease in postoperative CDI. PTSA change was positively correlated only with the correction angle; for each 1-degree increase in the opening angle, postoperative PTS increased by 0.188, with other factors constant. CONCLUSION: This study highlights the effectiveness and precision of PSGP-assisted MOWHTO, focusing on the impact of alignment correction on PH and PTSA. These findings support the optimization of PSGP technology, which offers simpler, faster, and safer surgeries with less radiation and bleeding than traditional methods. However, PSGP's one-time use design and the learning curve required for its application are limitations, suggesting areas for further research.