Sorption and attenuation of petroleum VOCs in five unsaturated soils: Microcosms and column experiments.

The fate of volatile organic compounds (VOC) vapors in the unsaturated zone is the basis for evaluating the natural attenuation potential and vapor intrusion risk. Microcosm and column experiments were conducted to study the effects chemical speciation and soil types/properties on the fate of petroleum VOCs in unsaturated zone. The biodegradation and total attenuation rates of the seven VOCs obtained by microcosm experiments in black soil and yellow earth were also generally higher than those in floodplain soil, lateritic red earth, and quartz sand. The VOC vapors in floodplain soil, lateritic red earth, and quartz sand showed slow total attenuation rates (<0.3 d-1). N-pentane, methylcyclopentane, and methylcyclohexane showed lower biodegradation rates than octane and three monoaromatic hydrocarbons. Volatilization into the atmosphere and biodegradation are two important natural attenuation paths for VOCs in unsaturated soil columns. The volatilization loss fractions of different volatile hydrocarbons in all five unsaturated soils were generally in the order: n-pentane (93.5%-97.8%) > methylcyclopentane (77.2%-85.5%) > methylcyclohexane (53.5%-69.2%) > benzene (17.1%-73.3%) > toluene (0-45.7%) > octane (1.9%-34.2%) > m-xylene (0-5.7%). The fractions by volatilization into the atmosphere of all seven hydrocarbons in quartz sand, lateritic red earth, and floodplain soil were close and higher compared to the yellow earth and black soil. Overall, this study illustrated the important roles chemical speciation and soil properties in determining the vapor-phase transport and natural attenuation of VOCs in the unsaturated zone.

Peering down the sink: A review of isoprene metabolism by bacteria.

Isoprene (2-methyl-1,3-butadiene) is emitted to the atmosphere each year in sufficient quantities to rival methane (>500 Tg C yr-1 ), primarily due to emission by trees and other plants. Chemical reactions of isoprene with other atmospheric compounds, such as hydroxyl radicals and inorganic nitrogen species (NOx ), have implications for global warming and local air quality, respectively. For many years, it has been estimated that soil-dwelling bacteria consume a significant amount of isoprene (~20 Tg C yr-1 ), but the mechanisms underlying the biological sink for isoprene have been poorly understood. Studies have indicated or confirmed the ability of diverse bacterial genera to degrade isoprene, whether by the canonical iso-type isoprene degradation pathway or through other less well-characterized mechanisms. Here, we review current knowledge of isoprene metabolism and highlight key areas for further research. In particular, examples of isoprene-degraders that do not utilize the isoprene monooxygenase have been identified in recent years. This has fascinating implications both for the mechanism of isoprene uptake by bacteria, and also for the ecology of isoprene-degraders in the environments.

Synthesis of meta-substituted arene bioisosteres from [3.1.1]propellane.

Small-ring cage hydrocarbons are popular bioisosteres (molecular replacements) for commonly found para-substituted benzene rings in drug design1. The utility of these cage structures derives from their superior pharmacokinetic properties compared with their parent aromatics, including improved solubility and reduced susceptibility to metabolism2,3. A prime example is the bicyclo[1.1.1]pentane motif, which is mainly synthesized by ring-opening of the interbridgehead bond of the strained hydrocarbon [1.1.1]propellane with radicals or anions4. By contrast, scaffolds mimicking meta-substituted arenes are lacking because of the challenge of synthesizing saturated isosteres that accurately reproduce substituent vectors5. Here we show that bicyclo[3.1.1]heptanes (BCHeps), which are hydrocarbons for which the bridgehead substituents map precisely onto the geometry of meta-substituted benzenes, can be conveniently accessed from [3.1.1]propellane. We found that [3.1.1]propellane can be synthesized on a multigram scale, and readily undergoes a range of radical-based transformations to generate medicinally relevant carbon- and heteroatom-substituted BCHeps, including pharmaceutical analogues. Comparison of the absorption, distribution, metabolism and excretion (ADME) properties of these analogues reveals enhanced metabolic stability relative to their parent arene-containing drugs, validating the potential of this meta-arene analogue as an sp3-rich motif in drug design. Collectively, our results show that BCHeps can be prepared on useful scales using a variety of methods, offering a new surrogate for meta-substituted benzene rings for implementation in drug discovery programmes.

A Practical and Scalable Approach to Fluoro-Substituted Bicyclo[1.1.1]pentanes.

After more than 20 years of trials, a practical scalable approach to fluoro-substituted bicyclo[1.1.1]pentanes (F-BCPs) has been developed. The physicochemical properties of the F-BCPs have been studied, and the core was incorporated into the structure of the anti-inflammatory drug Flurbiprofen in place of the fluorophenyl ring.

Hydrophobic association and solvation of neopentane in urea, TMAO and urea-TMAO solutions.

A detailed knowledge of hydrophobic association and solvation is crucial for understanding the con-formational stability of proteins and polymers in osmolyte solutions. Using molecular dynamics simulations, it is found that the hydrophobic association of neopentane molecules is greater in a mixed urea-TMAO-water solution in comparison to that in 8 M urea solution, 4 M TMAO solution and neat water. The neopentane association in urea solution is greater than that in TMAO solution or neat water. We find the association is even less in TMAO solution than pure water. From free energy calculations, it is revealed that the neopentane sized cavity creation in mixed urea-TMAO-water is most unfavorable and that causes the highest hydrophobic association. The cavity formation in urea solution is either more unfavorable or comparable to that in TMAO solution. Importantly, it is found that the population of neopentane-neopentane contact pair and the free energy contribution for the cavity formation step in TMAO solution are very sensitive towards the choice of TMAO force-fields. A careful construction of TMAO force-fields is important for studying the hydrophobic association. Interestingly it is observed that the total solute-solvent dispersion interaction energy contribution is always the most favorable in mixed urea-TMAO-water. The magnitude of this interaction energy is greater in urea solution relative to TMAO solution for two different force-fields of TMAO, whereas the lowest value is obtained in pure water. It is revealed that the extent of the overall hydrophobic association in osmolyte solutions is mainly governed by the cavity creation step and it nullifies the contribution coming from the solute-solvent interaction contribution.

Photochemical Formal (4 + 2)-Cycloaddition of Imine-Substituted Bicyclo[1.1.1]pentanes and Alkenes.

Amines containing bridged bicyclic carbon skeletons are desirable building blocks for medicinal chemistry. Herein, we report the conversion of bicyclo[1.1.1]pentan-1-amines to a wide range of polysubstituted bicyclo[3.1.1]heptan-1-amines through a photochemical, formal (4 + 2)-cycloaddition of an intermediate imine diradical. To our knowledge, this is the first reported method to convert the bicyclo[1.1.1]pentane skeleton to the bicyclo[3.1.1]heptane skeleton. Hydrolysis of the imine products gives complex, sp3-rich primary amine building blocks.

1,2-Difunctionalized bicyclo[1.1.1]pentanes: Long-sought-after mimetics for ortho/meta-substituted arenes.

The development of a versatile platform for the synthesis of 1,2-difunctionalized bicyclo[1.1.1]pentanes to potentially mimic ortho/meta-substituted arenes is described. The syntheses of useful building blocks bearing alcohol, amine, and carboxylic acid functional handles have been achieved from a simple common intermediate. Several ortho- and meta-substituted benzene analogs, as well as simple molecular matched pairs, have also been prepared using this platform. The results of in-depth ADME (absorption, distribution, metabolism, and excretion) investigations of these systems are presented, as well as computational studies which validate the ortho- or meta-character of these bioisosteres.

Evaluation of Microparticulate (S)-4,5-Dihydroxy-2,3-pentanedione (DPD) as a Potential Vaccine Adjuvant.

Adjuvants potentiate the immune response against co-inoculated antigens in the vaccine formulation. Based on the mechanism of action, the adjuvants are classified as immunostimulatory adjuvants and vaccine delivery systems. (S)-4,5-Dihydroxy-2,3-pentanedione (DPD) is the precursor of bacterial quorum sensing molecule, autoinducer (AI)-2. We tested the immunogenicity and adjuvant potential of microparticulate formulation of (S)-DPD via in vitro evaluation. By formulating the microparticles of (S)-DPD, we consolidated the advantages of both the classes of adjuvants. The microparticulate (S)-DPD was tested for its immunogenicity and cytotoxicity. We further tested its adjuvant effect by combining it with particulate vaccines for measles and gonorrhea and compared the adjuvant effect observed with the microparticulate formulations of the FDA-approved adjuvants alum, MPL A®, and MF59®. Microparticulate (S)-DPD was found to be non-cytotoxic towards the antigen-presenting cells and had an adjuvant effect with microparticulate gonorrhea vaccine. Further studies with additional bacterial vaccines and the in vivo evaluation will confirm the potential of microparticulate (S)-DPD as a probable vaccine adjuvant candidate.

Metabolic Engineering of Escherichia coli for De Novo Production of 1,5-Pentanediol from Glucose.

1,5-Pentanediol (1,5-PDO) is an important C5 building block for the synthesis of different value-added polyurethanes and polyesters. However, no natural metabolic pathway exists for the biosynthesis of 1,5-PDO. Herein we designed and constructed a promising nonnatural pathway for de novo production of 1,5-PDO from cheap carbohydrates. This biosynthesis route expands natural lysine pathways and employs two artificial metabolic modules to sequentially convert lysine into 5-hydroxyvalerate (5-HV) and 1,5-PDO via 5-hydroxyvaleryl-CoA. Theoretically, the 5-hydroxyvaleryl-CoA-based pathway is more energy-efficient than a recently published carboxylic acid reductase-based pathway for 1,5-PDO production. By combining strategies of systematic enzyme screening, pathway balancing, and transporter engineering, we successfully constructed a minimally engineered Escherichia coli strain capable of producing 3.19 g/L of 5-HV and 0.35 g/L of 1,5-PDO in a medium containing 20 g/L of glucose and 5 g/L lysine. Introducing the synthetic modules into a lysine producer and enhancing NADPH supply enabled the strain to accumulate 1.04 g/L of 5-HV and 0.12 g/L of 1,5-PDO using glucose as the main carbon source. This work lays the basis for the development of a biological route for 1,5-PDO production from renewable bioresources.

A New Method for In-Situ Skin Penetration Analysis by Confocal Raman Microscopy.

In the development of dermal drug formulations and cosmetics, understanding the penetration properties of the active ingredients is crucial. Given that widespread methods, including tape stripping, lack in spatial resolution, while being time- and labour-intensive, Confocal Raman Microscopy is a promising alternative. In optimizing topically applied formulations, or the development of generic formulations, comparative in-situ measurements have a huge potential of saving time and resources. In this work, we show our approach to in-situ skin penetration analysis by confocal Raman Microscopy. To analyse feasibility of the approach, we used caffeine solutions as model vehicles and tested the effectiveness of 1,2-pentanediol as a penetration enhancer for delivery to the skin.

N-(2'-Hydroxyphenyl)-2-Propylpentanamide (HO-AAVPA) Inhibits HDAC1 and Increases the Translocation of HMGB1 Levels in Human Cervical Cancer Cells.

N-(2'-hydroxyphenyl)-2-propylpentanamide (HO-AAVPA) is a VPA derivative designed to be a histone deacetylase (HDAC) inhibitor. HO-AAVPA has better antiproliferative effect than VPA in cancer cell lines. Therefore, in this work, the inhibitory effect of HO-AAVPA on HDAC1, HDAC6, and HDAC8 was determined by in silico and in vitro enzymatic assay. Furthermore, its antiproliferative effect on the cervical cancer cell line (SiHa) and the translocation of HMGB1 and ROS production were evaluated. The results showed that HO-AAVPA inhibits HDAC1, which could be related with HMGB1 translocation from the nucleus to the cytoplasm due to HDAC1 being involved in the deacetylation of HMGB1. Furthermore, an increase in ROS production was observed after the treatment with HO-AAVPA, which also could contribute to HMGB1 translocation. Therefore, the results suggest that one of the possible antiproliferative mechanisms of HO-AAVPA is by HDAC1 inhibition which entails HMGB1 translocation and ROS increased levels that could trigger the cell apoptosis.

Optical Properties of Composites Based on Graphene Oxide and Polystyrene.

In this work, new optical properties of composites based on polystyrene (PS) microspheres and graphene oxide (GO) are reported. The radical polymerization of styrene in the presence of benzoyl peroxide, pentane and GO induces the appearance of new ester groups in the PS macromolecular chains remarked through an increase in the absorbance of the infrared (IR) band at 1743 cm-1. The decrease in the GO concentration in the PS/GO composites mass from 5 wt.% to 0.5 wt.% induces a diminution in the intensities of the D and G Raman bands of GO simultaneous with a down-shift of the D band from 1351 to 1322 cm-1. These variations correlated with the covalent functionalization of the GO layers with PS. For the first time, the photoluminescent (PL) properties of PS/GO composites are reported. The PS microspheres are characterized by a PL band at 397 nm. Through increasing the GO sheets' concentration in the PS/GO composite mass from 0.5 wt.% to 5 wt.%, a PS PL quenching process is reported. In addition, in the presence of ultraviolet A (UVA) light, a photo-degradation process of the PS/GO composite having the GO concentration equal to 5 wt.% is demonstrated by the PL studies.

Copper-mediated synthesis of drug-like bicyclopentanes.

Multicomponent reactions are relied on in both academic and industrial synthetic organic chemistry owing to their step- and atom-economy advantages over traditional synthetic sequences1. Recently, bicyclo[1.1.1]pentane (BCP) motifs have become valuable as pharmaceutical bioisosteres of benzene rings, and in particular 1,3-disubstituted BCP moieties have become widely adopted in medicinal chemistry as para-phenyl ring replacements2. These structures are often generated from [1.1.1]propellane via opening of the internal C-C bond through the addition of either radicals or metal-based nucleophiles3-13. The resulting propellane-addition adducts are then transformed to the requisite polysubstituted BCP compounds via a range of synthetic sequences that traditionally involve multiple chemical steps. Although this approach has been effective so far, a multicomponent reaction that enables single-step access to complex and diverse polysubstituted drug-like BCP products would be more time efficient compared to current stepwise approaches. Here we report a one-step three-component radical coupling of [1.1.1]propellane to afford diverse functionalized bicyclopentanes using various radical precursors and heteroatom nucleophiles via a metallaphotoredox catalysis protocol. This copper-mediated reaction operates on short timescales (five minutes to one hour) across multiple (more than ten) nucleophile classes and can accommodate a diverse array of radical precursors, including those that generate alkyl, α-acyl, trifluoromethyl and sulfonyl radicals. This method has been used to rapidly prepare BCP analogues of known pharmaceuticals, one of which is substantially more metabolically stable than its commercial progenitor.

Polyethylene glycol (PEG-400) promoted one-pot, five-component synthesis of (E)-ethyl2-(2-((E)-2-(1-(4-methyl-2-(phenylamino)thiazol-5yl)ethylidene)hydrazinyl)-4-oxothiazol-5(4H)-ylidene)acetates.

A facile, inexpensive and eco-friendly synthesis of functionalised (E)-ethyl2-(2-((E)-2-(1-(4-methyl-2-(phenylamino)thiazol-5yl)ethylidene)hydrazinyl)14-oxothiazol-5(4H)-ylidene)acetates has been developed via one-pot five-component approach. The title compounds were synthesized by the reaction of anilines, 3-chloropentane-2,4-dione, ammoniumthiocyanate, thiosemicarbazide and dialkylacetylene dicarboxylate using polyethylene glycol as green and recyclable solvent. The domino reaction proceeded smoothly in good-to-excellent yields.

Reduction of thrombotic and inflammatory complications of polystyrene-block-polyisoprene-block-polystyrene (SIS) with one-step electrospinning.

Polystyrene-block-polyisoprene-block-polystyrene (SIS) has been used as biomaterials due to its soft and stable properties under physiological conditions. However, the thrombotic and inflammatory complications caused by SIS restrain its application as blood-contacting implant. To overcome this problem, the hydrophilic core-shell structured SIS-based microfiber with antioxidant encapsulation is fabricated with one-step reactive electrospinning. We demonstrate that the phase separation of SIS and acylated Pluronic F127 (F127-DA) components and crosslinking during electrospinning renders the microfiber blood compatible and stable under physiological condition; the encapsulation of 2-O-d-glucopyranosyl-l-ascorbic acid (AA-2G) in microfiber and subsequent release of AA-2G detoxifies the excess reactive oxygen species (ROS). The microfibers are nontoxic to cells and promote the fast growth and proliferation of human umbilical vein endothelial cells (HUVECs) in the presence of ROS; the thrombotic and inflammatory complications are effectively reduced with implant evaluation in vivo. Therefore, our work paves a new way to improve the biocompatibility of SIS, making it a promising candidate for blood contact materials.

Urban VOC profiles, possible sources, and its role in ozone formation for a summer campaign over Xi'an, China.

To insight the urban volatile organic compound (VOC) profiles and its contribution to ozone, four-time per day (8:00-9:00, 15:00-16:00, 19:00-20:00, and 23:00-24:00) off-line VOC samples were collected from 16th July to 28th July 2018 for a summer investigation campaign over Xi'an, China. The diurnal variation was significant that the lowest TVOC concentrations were observed in the midnight period (28.4 ± 25.6 ppbv) while the highest was shown in the morning (49.6 ± 40.1 ppbv). The differences of total non-methane VOCs (TVOCs) between weekdays and weekend were also significant that the weekend showed significantly high VOC levels than weekdays (p < 0.05) but did not lead to significant ambient O3 increase (p > 0.05). Isopentane, a general marker for vehicle exhaust, showed descending concentrations from morning to midnight and good correlation with vehicle numbers on road, indicating a potential source to the VOCs at this site. The results from PMF proved that vehicular exhaust was the largest source to the VOCs in this study (64.4%). VOC categories showed a reverse sequence in abundance of concentrations and OFP contributions that alkenes showed the highest OFPs although with the lowest abundance in TOVCs due to their high reactivity in photochemical reactions. High OFPs from ethylene and isopentane indicated that vehicular emissions could be the largest potential OFP source in this site. OFPs from isoprene (from 1.85 to 13.4 ppbv) indicated that biogenic VOCs should not be negligible in urban Xi'an city when controlling O3 pollutants. Comparison of two OFP methods was conducted and MIR method was proved to be more reasonable and scientific in summer Xi'an. Therefore, vehicular emission, the largest contributor to ambient VOCs and also OFPs, as well as biological source should be priority controlled in guiding VOC emissions and reducing O3 control policies.

DPD-Inspired Discovery of Novel LsrK Kinase Inhibitors: An Opportunity To Fight Antimicrobial Resistance.

Antibiotic resistance is posing a continuous threat to global public health and represents a huge burden for society as a whole. In the past decade, the interference with bacterial quorum sensing (QS) (i.e., cell-cell communication) mechanisms has extensively been investigated as a valid therapeutic approach in the pursuit of a next generation of antimicrobials. ( S)-4,5-Dihydroxy-2,3-pentanedione, commonly known as ( S)-DPD, a small signaling molecule that modulates QS in both Gram-negative and Gram-positive bacteria, is phosphorylated by LsrK, and the resulting phospho-DPD activates QS. We designed and prepared a small library of DPD derivatives, characterized by five different scaffolds, and evaluated their LsrK inhibition in the context of QS interference. SAR studies highlighted the pyrazole moiety as an essential structural element for LsrK inhibition. Particularly, four compounds were found to be micromolar LsrK inhibitors (IC50 ranging between 100 µM and 500 µM) encouraging further exploration of novel analogues as potential new antimicrobials.

Modification of Poly(ethylene 2,5-furandicarboxylate) with Biobased 1,5-Pentanediol: Significantly Toughened Copolyesters Retaining High Tensile Strength and O2 Barrier Property.

Poly(ethylene 2,5-furandicarboxylate) (PEF) is a biobased polyester characterized by high gas barrier properties as well as high tensile modulus and strength, but poor toughness. Toughening PEF without sacrificing its modulus, strength and gas barrier performance is a great challenge for PEF modification. In this study, high molecular weight random poly(ethylene- co-1,5-pentylene 2,5-furandicarboxylate)s (PEPeFs) were synthesized via melt copolycondensation of 2,5-furandicarboxylic acid (FDCA), ethylene glycol (EG) and 1,5-pentanediol (PeDO), a cheap, biobased and commercially available odd-carbon comonomer. The synthesized PEPeFs were characterized and assessed with intrinsic viscosity, ATR-FTIR, 1H NMR, DSC, TGA and tensile, impact and O2 permeation test. Mayo-Lewis equation with "reactivity ratio" of 3.78 for PeDO and 0.75 for EG could be used as an empirical equation to correlate the copolyester composition (ϕPeF) with monomer composition. PEPeFs proved nearly amorphous copolyesters having excellent thermal stability. Brittle-ductile transition was achieved at ϕPeF as low as 9 mol %. Increasing ϕPeF led to increase in elongation at break and notch impact strength and decrease in Tg, O2 barrier performance and tensile modulus and strength. However, in comparison with PEF, PEF-rich PEPeFs (ϕPeF 9-47%) not only showed greatly improved elongation at break (29-265% vs 4%) and enhanced impact strength (2.2-3.9 kJ/m2) but also retained very high Young's modulus (2.8-3.3 vs 3.3 GPa) and yielding strength (72-83 vs 82 MPa). Particularly, when compared with bottle-grade PET, PE82Pe18F possesses equal Tg (ca. 75 °C) and comparable elongation at break (ca. 115%), but greatly improved yielding strength (83 MPa) and O2 gas barrier property (4.8 times). As modified PEF materials possessing superior thermo-mechanical and O2 gas barrier properties, these integrally biobased copolyesters may find practical applications in eco-packaging and other fields.

A Versatile Strategy for the Synthesis of 4,5-Dihydroxy-2,3-Pentanedione (DPD) and Related Compounds as Potential Modulators of Bacterial Quorum Sensing.

Resistance to antibiotics is an increasingly serious threat to global public health and its management translates to significant health care costs. The validation of new Gram-negative antibacterial targets as sources for potential new antibiotics remains a challenge for all the scientists working in this field. The interference with bacterial Quorum Sensing (QS) mechanisms represents a potentially interesting approach to control bacterial growth and pursue the next generation of antimicrobials. In this context, our research is focused on the discovery of novel compounds structurally related to (S)-4,5-dihydroxy-2,3-pentanedione, commonly known as (S)-DPD, a small signaling molecule able to modulate bacterial QS in both Gram-negative and Gram-positive bacteria. In this study, a practical and versatile synthesis of racemic DPD is presented. Compared to previously reported syntheses, the proposed strategy is short and robust: it requires only one purification step and avoids the use of expensive or hazardous starting materials as well as the use of specific equipment. It is therefore well suited to the synthesis of derivatives for pharmaceutical research, as demonstrated by four series of novel DPD-related compounds described herein.