[Comparison of effectiveness of long and short proximal femoral nail anti-rotation in treatment of type A2.3 intertrochanteric fracture of femur].

Objective: To compare the effectiveness of long and short proximal femoral nail anti-rotation (PFNA) in the treatment of type A2.3 intertrochanteric fracture of femur (IFF). Methods: The clinical data of 54 patients with type A2.3 IFF admitted between January 2020 and December 2022 were retrospectively analyzed. According to the length of PFNA nail used in the operation, they were divided into long nail group (PFNA nail length>240 mm, 24 cases) and short nail group (PFNA nail length≤240 mm, 30 cases). There was no significant difference in baseline data such as gender, age, fracture side, body mass index, and time from fracture to operation between the two groups ( P>0.05). The operation time, intraoperative blood loss, intraoperative fluoroscopy frequency, intraoperative reduction quality score, fracture healing, and complications of the two groups were recorded and compared. Harris score was used to evaluate the hip function of patients at 1 year after operation. According to the relationship between the fracture line of type A2.3 IFF and the lesser trochanter, the two groups of patients were divided into type Ⅰ(the fracture line extends to the level of the lesser trochanter), type Ⅱ(the fracture line extends to less than 2 cm below the lesser trochanter), and type Ⅲ (the fracture line extends to more than 2 cm below the lesser trochanter), and the postoperative stability and internal fixator loosening of each subtype were evaluated. Results: The operation time, intraoperative blood loss, and intraoperative fluoroscopy frequency in short nail group were significantly less than those in long nail group ( P<0.05). There was no significant difference in the intraoperative reduction quality score between the two groups ( P>0.05). Patients in both groups were followed up 12-18 months, with an average of 13.5 months. The postoperative stability score of short nail group was significantly lower than that of long nail group ( P<0.05). The Harris score in the long nail group was significantly higher than that in the short nail group at 1 year after operation ( P<0.05), but there was no significant difference in Harris score grading between the two groups ( P>0.05). Complications occurred in 3 cases of the long nail group (including 1 case of coxa varus caused by external nail entry point and 2 cases of loose internal fixator), and 7 cases of the short nail group (including 1 case of coxa varus caused by external nail entry point and 6 cases of loose internal fixator). Neither group had any anterior femoral arch damage, there was no significant difference in the incidence of complications between the two groups ( P>0.05). The number of type Ⅲ patients was relatively small and not included in the statistics; there was no significant difference in the postoperative stability score and the incidence of internal fixator loosening between the long and short nail groups in type Ⅰ patients ( P>0.05). In type Ⅱ patients, the postoperative stability score and the incidence of internal fixation loosening in the long nail group were significantly better than those in the short nail group ( P<0.05). Conclusion: Long PFNA fixation for type A2.3 IFF has longer operation time and more intraoperative blood loss, but the overall stability of fracture is better after operation. For type A2.3 IFF with fracture line extending to less than 2 cm below the lesser trochanter, long PFNA is used for fixation, although the surgical trauma is large, but the postoperative stability is better than that of short PFNA; for type A2.3 IFF with fracture line extending to the lesser trochanter, there is no significant difference in postoperative stability between long and short PFNAs.

[Comparison of effectiveness of tibial intramedullary nailing fixation via suprapatellar approach and medial parapatellar approach in treatment of multiple tibial fractures].

Objective: To compare the effectiveness of intramedullary nailing fixation via suprapatellar approach and medial parapatellar approach in semi-extended position in the treatment of multiple tibial fractures. Methods: The clinical data of 43 patients with multiple tibial fractures treated with intramedullary nailing fixation between July 2018 and December 2022 were retrospectively analyzed, including 23 patients treated with suprapatellar approach in semi-extended position (group A) and 20 patients with medial parapatellar approach in semi-extended position (group B). There was no significant difference in gender, age, cause of injury, time from injury to operation, AO/Orthopaedic Trauma Association (AO/OTA) classification, preoperative visual analogue scale (VAS) score, and range of motion (ROM) of the knee joint between the two groups ( P>0.05). The operation time, intraoperative blood loss, incision length, intraoperative fluoroscopy frequency, and fracture healing time were recorded and compared. The VAS score and ROM of the knee joint were analyzed at 4, 8, and 12 weeks after operation, and the incidence of postoperative complications was observed; knee function was evaluated by Lysholm score at last follow-up. Results: The operations were successfully completed in both groups, and there was no complication such as nerve and blood vessel injury during operation, and all incisions healed by first intention. There was no significant difference in operation time, intraoperative blood loss, and intraoperative fluoroscopy frequency between the two groups ( P>0.05), but the incision length in group B was significantly longer than that in group A ( P<0.05). Patients in both groups were followed up 12-30 months, with an average of 21.1 months. The VAS score decreased and ROM increased gradually in both groups with time after operation, showing significant differences between different time points ( P<0.05). The VAS score of group B was significantly lower than that of group A at 4 and 8 weeks after operation ( P<0.05); there was no significant difference in VAS score and ROM between the two groups at other time points ( P>0.05). There was no significant difference in fracture healing time between the two groups ( P>0.05). During the follow-up, there was no complication such as internal fixator loosening, breakage, and loss of fracture reduction. At last follow-up, the Lysholm score in group B was significantly better than that in group A ( P<0.05). Conclusion: Both the suprapatellar approach and the medial parapatellar approach in semi-extended position can achieve satisfactory results in the treatment of multiple tibial fractures. The medial parapatellar approach has lower symptoms of early knee pain and better long-term function.

Lag Screw Exchange for Impinging Lateral Hardware Following Intramedullary Nailing of Intertrochanteric Hip Fractures - A Case Series Demonstrating Efficacy.

Background: This study aimed to demonstrate the feasibility of lag screw exchange for painful lateral soft tissue impingement in patients initially treated with cephalomedullary nailing (CMN) for an intertrochanteric hip fracture. Methods: Ten patients initially treated with CMN for unstable intertrochanteric fractures presenting with persistent pain and radiographic evidence of lag screw lateral migration were treated with exchange of original screw with shorter lag screw buried in the lateral cortex to prevent impingement. Patients were evaluated for resolution of pain and achievement of pre-fracture ambulatory status at 6 months post-operatively. Results: Average age was 71.5 years (range: 62-88). Average length of follow-up was 24.9 months. All patients were female, with an average Charlson Comorbidity Index of 1.0 (0-3) and average Body Mass Index of 22.2 (16.0-31.1). Five of ten patients (50.0%) were treated with a cortisone injection in the trochanteric bursa prior to screw exchange with temporary pain relief. Five (50.0%) patients presented with limited range of hip motion. Five (50.0%) had history of prior or current bisphosphonate use. Average lag screw prominence was noted to be 12.2mm (7.9-17.6mm) on radiographic evaluation. Screw exchange was performed at an average of 18.6 months (5.4-44.9 months) following the index procedure. Average operating time of the screw exchange procedure was 45.3 minutes (34-69 minutes) and blood loss was <50mL in all cases. Replacement lag screws were an average of 16.0mm (10-25mm) shorter than the initial screw. All patients achieved complete or significant resolution of lateral thigh pain, and nine (90%) returned to pre-fracture ambulatory status by eight weeks after screw exchange. All patients remained pain free at six months after screw exchange. Conclusion: Lag screw exchange is a efficacious method to address the mechanical irritation of laterally protruding lag screws following IT hip fracture, while also prophylaxing against subsequent femoral neck fractures. Level of Evidence: IV.

What is the Optimal Nail Length to Treat Osteoporotic Subtrochanteric Fractures? A Finite Element Analysis.

Background: Operative management with intramedullary nail fixation remains the definitive treatment of choice for osteoporotic subtrochanteric (ST) fractures; however, there remains no consensus regarding the proper nail length. We aimed to use 3-dimensional finite element (FE) analysis to determine the optimal nail length for the safe fixation of osteoporotic ST fractures. Methods: Nine modes of FE models were constructed using 9 different lengths of cephalomedullary nails (short nails: 170, 180, and 200 mm; long nails: 280, 300, 320, 340, 360, and 380 mm) from the same company. The interfragmentary motion was analyzed. Additionally, the peak von Mises stress (PVMS) in the cortical bone, cancellous bone of the femoral head, and the nail were measured, and the yielding risk for each subject was investigated. Results: Long nails were associated with less interfragmentary motion. In the cortical bone, the PVMS of short nails was observed at the distal locking screw holes of the femoral medial cortex; however, in long nails, the PVMS was observed at the lag screw holes on the lateral cortex. The mean yielding risk of long nails was 40.1% lower than that of short nails. For the cancellous bone of the femoral head, the PVMS in all 9 FE models was in the same area: at the apex of the femoral head. There was no difference in the yielding risk between short and long nails. For implants, the PVMS was at the distal locking screw hole of the nail body in the short nails and the nail body at the fracture level in the long nails. The mean yielding risk was 74.9% lower for long nails than that for short nails. Conclusions: Compared to short nails, long nails with a length of 320 mm or more showed less interfragmentary motion and lower yielding risk in low-level osteoporotic ST fractures. The FE analysis supports long nails as a safer option than short nails, especially for treating transverse-type low-level osteoporotic ST fractures.

Incidence and Risk Factors of Osteonecrosis of the Femoral Head after Cephalomedullary Nailing for Pertrochanteric Fractures: Observational Single-Center Study.

Background: The objective of this study was to investigate the incidence of osteonecrosis of the femoral head (ONFH) after cephalomedullary nailing in elderly patients with pertrochanteric fractures and to analyze the risk factors related to ONFH. Methods: A total of 689 consecutive patients with cephalomedullary nailing for pertrochanteric fractures at our hospital were recruited. Of these, 368 patients who met the inclusion criteria were finally enrolled. ONFH after cephalomedullary nailing was identified by reviewing patients' electronic charts and serial radiographs. The ONFH group was then compared with the non-ONFH group. Results: ONFH was identified in 9 of 368 patients (2.4%). The time to diagnosis of ONFH averaged 23.8 months (range, 5-54 months) after index surgery. The mean age, body mass index, and bone mineral density (T-score in femur neck) were 84.1 ± 7.1 years, 23.7 ± 3.6 kg/m2, and -3.1 ± 0.7 kg/m2, respectively. The times from injury to surgery, from admission to surgery, and operation time averaged 4.2 ± 2.7 days, 3.6 ± 2.6 days, and 87.2 ± 30.0 minutes, respectively. Among 9 patients, 3 underwent conversion arthroplasty. The ONFH group had advanced age (p = 0.029), more basicervical fracture components (p = 0.002), and inadequate reduction (p = 0.045) compared to the non-ONFH group. On multivariate analysis, advanced age (odds ratio [OR], 1.61;, p = 0.022), basicervical fracture components (OR, 24.58; p = 0.001), and inadequate reduction (OR, 4.11; p = 0.039) were identified as risk factors of ONFH. Conclusions: Although ONFH is relatively rare after cephalomedullary nailing for pertrochanteric fractures in elderly patients, its risk may increase with advanced age, basicervical fracture components, and inadequate reduction. Therefore, in patients with these risk factors, meticulous and longer follow-up is needed even after bone union.

Eliminating rote postoperative radiographs for surgically managed pediatric supracondylar humerus fractures.

BACKGROUND: Use of postoperative radiographs after surgical management of supracondylar humerus (SCH) fractures is often based on rote practice rather than evidence. The purpose of this study was to determine the frequency with which 3-week postoperative radiographs at the time of pin removal altered management plans in pediatric SCH fractures that were intraoperatively stable after closed reduction and percutaneous pinning (CRPP). METHODS: We prospectively recruited pediatric patients with SCH fractures managed by CRPP at our institution from June 2020 until June 2022, and reviewed retrospective data on pediatric SCH fractures managed surgically at our institution between April 2008 and March 2015. Patients were assessed for post-CRPP fracture alignment and stability. For prospective patients, we asked clinicians to document their management decision at the 3-week follow-up visit before evaluating the postoperative radiographs. Our primary outcome was change in management because of radiographic findings. RESULTS: Overall, 1066 patients in the retrospective data and 446 prospectively recruited patients met the inclusion criteria. In the prospective group, radiographic findings altered management for 2 patients (0.4%). One patient had slow callus formation and 1 patient was identified as having cubitus varus. Altered management included prolonged immobilization or additional radiographic follow-up. Radiographic findings altered management in 0 (0%) of 175 type II fractures, in 2 (0.9%) of 221 type III fractures, and in 0 (0%) of 44 type IV fractures. We obtained similar findings from retrospective data. CONCLUSION: Rote use of 3-week postoperative radiographs after surgical management of SCH fractures that are intraoperatively stable has minimal utility. Eliminating rote postoperative radiographs for SCH fractures can decrease the time and financial burdens on families and health care systems without affecting patient outcomes.

Complications Following Short Femoral Nail Fixation for Intertrochanteric Hip Fractures: A Retrospective Study.

The incidence of proximal femur fractures is increasing due to aging of the population. Intramedullary nails are the mainstay of treatment for intertrochanteric hip fractures mainly due to their better biomechanical properties compared to dynamic hip screw devices, shorter operative time, and less blood loss during surgery. However intramedullary nail fixation is not devoid of complications. The purpose of this study is to look at complications related to intramedullary nailing for intertrochanteric hip fractures in a major trauma center. A retrospective study was conducted including all patients having suffered an intertrochanteric femur fracture and treated with intramedullary nails from October 1, 2020, to October 1, 2022, in the Orthopaedic Surgery Clinic. The intramedullary hip systems used were the Stryker Gamma3 Nail and the VITUS PF Nail. All complications following the postoperative period were recorded in detail. Overall, 240 patients with a mean age of 82.3 years treated with hip intramedullary devices were identified. Superior cutout of the lag screw in two patients (females 90 and 87 years old) was identified 8 and 10 weeks following initial surgery. Avascular necrosis (AVN) of the femoral head was identified in one patient (male 81 years old) which occurred 12 weeks postoperatively. All three cases were revised by replacing the nail with cemented hemiarthroplasty. Periprosthetic fractures occurred in an 88-year-old male and a 73-year-old female following an injury distal to the stem and were managed by replacing the nail with a long stem device (Long Gamma3). One case of metalwork fracture was also recorded. There are many advantages in managing intertrochanteric hip fractures with intramedullary hip devices such as shorter theater time, less blood loss, and improved biomechanical properties. However, complications such as cutout of the lag screw, AVN, and periprosthetic fracture are serious and require complex revision surgery.

Association between the procedure of tibiotalocalcaneal arthrodesis by hindfoot nailing and quality of life in Charcot's joint.

INTRODUCTION: Charcot arthropathy is a progressive disorder of the ankle and foot joints that can lead to foot deformity and instability. Surgical intervention is often necessary for deformity and ulcer management during the chronic phase. The device used for arthrodesis remains a challenge. METHODS: This clinical trial study included diabetic patients aged 40 years or older with Charcot foot. Lateral approach with lateral malleolar osteotomy was used to access the ankle joints and remove the cartilage. A small incision was made on the plantar aspect of the foot to pass an appropriately sized intramedullary nail. Demographic information, medical history, surgical details and Clinical data were collected at 2-week and 1-year follow-ups using the Ankle-Hindfoot Scale (AOFAS) score and the EuroQol 5-Dimensional 5-Level (EQ-5D-5L) health utility score. RESULTS: Twenty-six patients with a mean age of 63 ± 0.23 years were included in the study. The findings showed significant improvements in AOFAS questionnaire items related to pain score, length of the walk, walking surfaces, walking disorders, sagittal alignment, back leg alignment, sustainability, alignment and the total score (P value < 0.001). The EQ-5D-5L questionnaire also showed a significant improvement in the total score (P value = 0.002). CONCLUSION: This study provides evidence supporting the effectiveness of tibiotalocalcaneal arthrodesis by hindfoot nailing in diabetic patients with Charcot foot joints and demonstrated comparable and superior outcomes in terms of patient satisfaction and complication rate when compared to previous studies.

Posterolateral wall integrity in reverse oblique intertrochanteric fracture fixation: A new perspective in evaluation.

BACKGROUND: Treatment of reverse oblique fractures has the highest complication rate among proximal femur fractures. Although intramedullary nailing is the preferred treatment option, a high failure rate has been reported. Previous studies have identified several contributing factors to these failures, yet the significance of posterolateral wall integrity in ensuring postoperative stability has not been emphasized. This study aims to investigate the impact of posterolateral wall integrity on the failure rates of reverse oblique intertrochanteric fractures treated with intramedullary nails (IMN) and assess the vulnerability of certain IMN designs to these failures. METHODS: Between 2010 and 2016, 53 patients with reverse oblique fractures were analyzed to identify factors associated with IMN failure. Variables such as posterolateral wall integrity, quality of reduction, posteromedial support, and IMN design were considered as potential risk factors. Logistic regression analysis was conducted to evaluate these risk factors, with statistical significance defined as p<0.05. RESULTS: Eleven cases of implant failure were identified. Univariate statistical analysis indicated that loss of posterolateral support (p=0.002), IMN with single-screw proximal fixation (p=0.048), poor reduction quality (p=0.004), and loss of posteromedial support (p=0.040) were associated with implant failure. Multivariate analysis confirmed loss of posterolateral support (p=0.009), poor reduction quality (p=0.039), and loss of posteromedial support (p=0.020) as independent risk factors for failure. However, IMN with single proximal fixation (p=0.859) did not significantly impact fixation failure. CONCLUSION: Reverse oblique intertrochanteric fractures with compromised posterolateral support exhibit a high rate of mechanical failure when treated with IMN. Additionally, poor reduction quality and loss of posteromedial support increase the risk for failure of these fractures. An IMN design featuring dual separate proximal screw fixations could provide better stability compared to a design with a single proximal screw, thereby reducing the risk of mechanical failure.

[Comparison of open reduction hollow nail anchoring system with loop plate fixation under arthroscopy for the treatment of posterior cruciate ligament avulsion fractures].

OBJECTIVE: To compare clinical effect between open reduction and fixation with cannulated screw and threaded rivet via posteromedial approach versus arthroscopic Endobutton plate fixation in treating posterior cruciate ligament avulsion fractures. METHODS: Clinical data of 38 patients with posterior cruciate ligament avulsion fractures from July 2020 to December 2021 were analyzed retrospectively, and divided into open reduction and internal fixation group (posterior medial approach hollow anchor system fixation) and arthroscopic fixation group (Endobutton with loop plate fixation under arthroscopy). There were 20 patients in open reduction and internal fixation group, including 16 males and 4 females, aged from 26 to 74 years old with an average of (42.9±18.8) years old;13 patients on the left side and 7 patients on the right side;12 patients were classified to typeⅡand 8 patiens with type Ⅲ according to Meyers-McKeever fractures classification;14 patients were gradeⅡand 6 patients were grade Ⅲ in back drawer test. There were 18 patients in arthroscopic fixation group, including 11 males and 7 females;aged from 24 to 70 years old with an average of (53.5±13.4) years old;11 patients on the left side and 7 patients on the right side;10 patients were classified to typeⅡand 8 patiens with type Ⅲ according to Meyers-McKeever fractures classification;11 patients were gradeⅡand 7 patients were grade Ⅲ in back drawer test. Operation time, blood loss, and quality of immediate reduction were compared between two groups. Knee range of motion, knee back drawer test, and International Knee Documentation Committee(IKDC) grading, KT2000 stability evaluation and Lysholm function score of knee joint were compared at 6 months after operation. RESULTS: All patients were followed up for 8 to 16 months with an average of (12.3±1.9) months. There were no complications such as incision infection, fracture malunion or non-union, and internal fixation loosening occurred. The avulsion fractures of knee joint were reached to imaging healing standard at 6 months after operation. Operation time and blood loss in open reduction and internal fixation group were (56.4±7.1) min and (63.2±10.2) ml, while (89.9±7.4) min and (27.7±8.7) ml in arthroscopic fixation group, respectively, and had significant difference between two groups (P<0.05). There were no differences in immediate reduction quality (χ2=0.257, P=0.612), knee joint range of motion at 6 months after opertaion (t=0.492, P=0.626), knee joint rear drawer test ( χ2=0.320, P=0.572), IKDC classification of knee joint (χ2=0.127, P=0.938), KT2000 stability evaluation (χ2=0.070, P=0.791), and knee Lysholm function score (t=0.092, P=0.282) between two groups. CONCLUSION: Posterior medial approach with hollow anchoring system fixation and arthroscopic Endobutton with loop plate fixation for the treatment of posterior cruciate ligament tibial occlusion avulsion fracture could achieve satisfactory clinical results, and arthroscopic surgery has less bleeding, but also has a longer learning curve and longer operation time than traditional incision surgery. The surgeon needs to make a choice according to clinical situation of patient and their own surgical inclination.

Patient-Reported Outcomes After Intramedullary Nailing of Oncologic Impending or Pathologic Fractures With Carbon Fiber or Titanium Implant.

INTRODUCTION: Despite the benefits of intramedullary nailing (IMN) of impending or pathologic fractures in oncologic patients, literature on patient-reported outcomes (PROs) is scarce in patients treated with carbon fiber (CF) nails. Our study compared postoperative PROs after IMN with CF or titanium implants. METHODS: We conducted a retrospective propensity score-matched cohort study of patients treated at our institution with CF or titanium nails for impending or pathologic fractures from metastatic bone disease. Patient-Reported Outcomes Measurement Information System (PROMIS) Global Health Short Form (SF) Physical, Mental, and Physical Function 10a scores were collected. Pain was assessed using visual analog scale (VAS). Absolute and differential scores were compared between groups. RESULTS: We included 207 patients, 51 treated with CF and 156 with titanium nails. One month postoperatively, patients had a one-point decrease in the pain VAS score while PROMIS scores did not improve. At 3 months, PROMIS SF Physical and SF 10a scores improved from preoperative values. Six months postoperatively, median PROMIS SF Physical, SF Mental, and SF 10a scores were higher than preoperative scores. Absolute and differential PROMIS and pain VAS scores were similar between groups at the 6-month and 1-year marks. CONCLUSION: Patient-reported outcomes were similar after intramedullary nailing with either CF or titanium implants.

Changes in nail position and antirotation blade angles on the risk of femoral head varus in PFNA fixed patients: a clinical review and comprehensive biomechanical research.

BACKGROUND: Femoral head varus triggers poor clinical prognosis in intertrochanteric fracture patients with proximal femoral nail antirotation (PFNA) fixation. Studies present that changes in nail position and screw insertion angles will affect fixation stability, but the biomechanical significance of these factors on the risk of femoral head varus has yet to be identified in PFNA fixed patients. METHODS: Clinical data in PFNA fixed intertrochanteric fracture patients have been reviewed, the relative position of intermedullary nail has been judged in the instant postoperative lateral radiography. Regression analyses have been performed to identify the effect of this factor on femoral head varus. Corresponding biomechanical mechanism has been identified by numerical mechanical simulations. RESULTS: A clinical review revealed that ventral side nail insertion can trigger higher risk of femoral head varus, corresponding numerical mechanical simulations also recorded poor fixation stability in models with ventral side nail insertion, and changes in the trajectory of anti-rotation blade will not obviously affect this tendency. CONCLUSIONS: Ventral side insertion of intramedullary nail can trigger higher risk of femoral head varus in PFNA fixed patients by deteriorating the instant postoperative biomechanical environment, and changes in blade trajectory cannot change this tendency biomechanically. Therefore, this nail position should be adjusted to optimize patients' prognosis.

Risk factors of poor mid-term shoulder functional outcomes of osteosynthesis using antegrade intramedullary nailing for humeral shaft fractures: a retrospective study with a minimum 5-year follow-up.

BACKGROUND: Osteosynthesis using antegrade intramedullary nailing for humeral shaft fractures yields satisfactory bone union rates; however, it may adversely affect postoperative shoulder function. To date, factors affecting mid- or long-term shoulder functional outcomes following intramedullary nail fixation have not been clarified. In this study, we aimed to identify the risk factors for poor mid-term functional outcomes over 5 years postoperatively following antegrade intramedullary nail osteosynthesis for humeral shaft fractures. METHODS: We retrospectively identified 33 patients who underwent surgery using an antegrade intramedullary nail for acute traumatic humeral shaft fractures and were followed up for at least 5 years postoperatively. We divided the patients into clinical failure and no clinical failure groups using an age- and sex-adjusted Constant score of 55 at the final follow-up as the cutoff value. We compared preoperative, perioperative, and postoperative factors between the two groups. RESULTS: Five of the 33 patients had poor shoulder functional outcomes (adjusted Constant score < 55) at a mean follow-up of 7.5 years postoperatively. Proximal protrusion of the nail at the time of bone union (P = 0.004) and older age (P = 0.009) were significantly associated with clinical failure in the univariate analyses. Multivariate analysis showed that proximal protrusion of the nail (P = 0.031) was a risk factor for poor outcomes. CONCLUSIONS: The findings of this study provide new information on predictive factors affecting mid-term outcomes following osteosynthesis using antegrade nails. Our results demonstrated that proximal protrusion of the nail was significantly associated with poor mid-term functional shoulder outcomes. Therefore, particularly in older adults, it is essential to place the proximal end of the intramedullary nail below the level of the articular cartilage.

Torsional stability of fixation methods in basicervical femoral neck fractures: a biomechanical study.

BACKGROUND: Basicervical femoral neck fracture is a rare proximal femur fracture with a high implant failure rate. Biomechanical comparisons between cephalomedullary nails (CMNs) and dynamic hip screws (DHSs) under torsion loading are lacking. This study compared the biomechanical performance of three fixations for basicervical femoral neck fractures under torsion load during early ambulation. METHODS: The biomechanical study models used three fixations: a DHS, a DHS with an anti-rotation screw, and a short CMN. Finite element analysis was used to simulate hip rotation with muscle forces related to leg swing applied to the femur. The equivalent von Mises stress (EQV) on fixation, fragment displacement, and strain energy density at the proximal cancellous bone were monitored for fixation stability. RESULTS: The EQV of the short CMN construct (304.63 MPa) was comparable to that of the titanium DHS construct (293.39 MPa) and greater than that of the titanium DHS with an anti-rotation screw construct (200.94 MPa). The proximal fragment displacement in the short CMN construct was approximately 0.13 mm, the greatest among the constructs. The risk of screw cutout for the lag screw in short CMNs was 3.1-5.8 times greater than that for DHSs and DHSs with anti-rotation screw constructs. CONCLUSIONS: Titanium DHS combined with an anti-rotation screw provided lower fragment displacement, stress, and strain energy density in the femoral head than the other fixations under torsion load. Basicervical femoral neck fracture treated with CMNs may increase the risk of lag screw cutout.

Tibiotalocalcaneal ankle arthrodesis with posterior approach arthroscopic-assisted hindfoot nailing.

PURPOSE: End-stage ankle arthrosis causes severe pain and limited movement. Tibiotalocalcaneal arthrodesis with arthroscopy-assisted hindfoot nailing can be used to achieve a high union rate and low complication rate. We aimed to examine the early- and mid-term results of patients treated with this technique from various perspectives and to evaluate them by comparing them with the current literature. METHODS: Data were collected from 25 patients who met the established criteria and underwent TTCA with arthroscopic-assisted hindfoot nailing. In addition to the demographic data of the patients, their clinical and pain scores were evaluated using the American Orthopedic Foot and Ankle Society (AOFAS) and visual analogue scale (VAS). Additionally, the union time and complication data during the follow-up period were examined. RESULTS: When the AOFAS and VAS scores of the 25 patients were examined, a significant improvement was observed in the preoperative period and early postoperative period comparisons (p < .001). No significant change was observed between the comparison of the postoperative 12th month and last postoperative control clinical scores. While the union rate of the patients was observed to be 92%, the average union time was 13.1 ± 3.5 weeks. During follow-up, peri-implant fracture, deep infection, and non-union were observed in one patient each (12%). CONCLUSION: The early- and mid-term postoperative results of patients treated with TTCA surgery with posterior approach arthroscopic-assisted hindfoot nailing show that this technique may be an option with low complication and high union rates for the appropriate group of patients planned for ankle arthrodesis.

Biomechanical comparison of the therapeutic effect of a novel proximal femoral bionic intramedullary nail and traditional inverted triangle hollow screw on femoral neck fracture.

OBJECTIVE: A novel Proximal Femoral Bionic Nail (PFBN) has been developed by a research team for the treatment of femoral neck fractures. This study aims to compare the biomechanical properties of the innovative PFBN with those of the conventional Inverted Triangular Cannulated Screw (ITCS) fixation method through biomechanical testing. METHODS: Sixteen male femoral specimens preserved in formalin were selected, with the donors' age at death averaging 56.1 ± 6.3 years (range 47-64 years), and a mean age of 51.4 years. The femurs showed no visible damage and were examined by X-rays to exclude diseases affecting bone quality such as tumors, severe osteoporosis, and deformities. The 16 femoral specimens were randomly divided into an experimental group (n = 8) and a control group (n = 8). All femurs were prepared with Pauwels type III femoral neck fractures, fixed with PFBN in the experimental group and ITCS in the control group. Displacement and stress limits of each specimen were measured through cyclic compression tests and failure experiments, and vertical displacement and strain values under a 600 N vertical load were measured in all specimens through vertical compression tests. RESULTS: In the vertical compression test, the average displacement at the anterior head region of the femur was 0.362 mm for the PFBN group, significantly less than the 0.480 mm for the ITCS group (p < 0.001). At the fracture line area, the average displacement for the PFBN group was also lower than that of the ITCS group (0.196 mm vs. 0.324 mm, p < 0.001). The difference in displacement in the shaft area was smaller, but the average displacement for the PFBN group (0.049 mm) was still significantly less than that for the ITCS group (0.062 mm, p = 0.016). The situation was similar on the posterior side of the femur. The average displacements in the head area, fracture line area, and shaft area for the PFBN group were 0.300 mm, 0.168 mm, and 0.081 mm, respectively, while those for the ITCS group were 0.558 mm, 0.274 mm, and 0.041 mm, with significant differences in all areas (p < 0.001). The average strain in the anterior head area for the PFBN group was 4947 µm/m, significantly less than the 1540 µm/m for the ITCS group (p < 0.001). Likewise, in the fracture line and shaft areas, the average strains for the PFBN group were significantly less than those for the ITCS group (p < 0.05). In the posterior head area, the average strain for the PFBN group was 4861 µm/m, significantly less than the 1442 µm/m for the ITCS group (p < 0.001). The strain conditions in the fracture line and shaft areas also showed the PFBN group was superior to the ITCS group (p < 0.001). In cyclic loading experiments, the PFBN fixation showed smaller maximum displacement (1.269 mm vs. 1.808 mm, p < 0.001), indicating better stability. In the failure experiments, the maximum failure load that the PFBN-fixated fracture block could withstand was significantly higher than that for the ITCS fixation (1817 N vs. 1116 N, p < 0.001). CONCLUSION: The PFBN can meet the biomechanical requirements for internal fixation of femoral neck fractures. PFBN is superior in biomechanical stability compared to ITCS, particularly showing less displacement and higher failure resistance in cyclic load and failure experiments. While there are differences in strain performance in different regions between the two fixation methods, overall, PFBN provides superior stability.

Nailing precision: a systematic review and meta-analysis of randomized controlled trials comparing piriformis and trochanteric entry points for femoral antegrade nailing.

INTRODUCTION: Entry point selection, a crucial aspect of femoral antegrade nailing, can impact nail fit and consequently fracture reduction. In adults, the standard entry portals used are the piriformis fossa and the tip of the greater trochanter. Previous systematic reviews comparing the two techniques have not been limited to Randomized Controlled Trials (RCTs) and have not consistently included the same available RCTs. MATERIALS AND METHODS: A systematic search of comparative studies regarding entry portal selection in femoral antegrade nailing was conducted on seven databases. Only Prospective RCTs comparing trochanteric and piriformis entry in the management of trochanteric or diaphyseal femur fractures were eligible for inclusion. RESULTS: Ultimately, only 6 RCTs were found eligible for inclusion. Five of the six included studies reported on operative time. The resulting mean difference (MD) illustrated a significant decrease in operative time by approximately 21.26 min (95% CI - 28.60 to - 13.92, p < 0.001) using trochanteric entry. Fluoroscopy exposure was reported on by four studies, however, only two studies were included in the analysis due to different reporting methods. Trochanteric entry used significantly less fluoroscopy than piriformis entry (MD -50.33 s, 95% CI - 84.441 to - 16.22, p = 0. 004). No significant difference in malalignment rates, delayed union rates, nonunion rates, pain scores, or complication rates was found. CONCLUSION: The significant differences found in operating time and fluoroscopy time align with those in other studies. While we were not able to pool the data on functional outcome scores, none of the included studies found a significant difference in scores by their last follow-up. Both approaches demonstrate comparable functional outcomes and safety profiles, indicating the choice of entry point should be at the discretion of the surgeon based on technique familiarity and fracture characteristics.

Retrospective evaluation of radiological and clinical outcomes after surgical treatment of proximal femoral fractures utilizing PFNA and PFNA augmented.

INTRODUCTION: The primary aim of this study was to evaluate the clinical and radiological outcomes after surgical treatment of proximal femoral fractures utilizing the Proximal Femoral Nail Antirotation (PFNA), with the main focus on complications and reoperations. The secondary aim was to compare the outcomes of patients with and without cement augmentation of the cephalomedullary nails. MATERIALS AND METHODS: All patients with an acute proximal femoral fracture consequently treated with a PFNA between January 2011 and Dezember  2018 were evaluated. Clinical and radiological data were assessed for intra- and postoperative complications, including treatment failure. In addition, intra- and postoperative radiographs were used to determine the position of the implant, and any migration, via Tip-Apex-Distance (TAD) and the caput-collum-diaphyseal angle (CCD). The accuracy of the fracture reduction was rated according to Baumgaertners criteria. RESULTS: Two hundred sixty-four consecutive patients (mean age 78.8 ± 12.0; 73.1% female) were included. The predominant OTA/AO fracture classification was 31A1 (153 cases, 58.0%). The average duration of surgery was 63.1 ± 28.0 min and showed no significant differences between PFNA and PFNA with augmentation. The implant positioning was rated as good in 222 cases (84.1%). Two hundred sixty-three patients (99.6%) showed evidence of healing within the time frame of three months postoperatively, one case of delayed union healed after secondary dynamization. During the observational period, 18 patients (6.8%) required a total of 23 additional surgeries. Overall, a lower reoperation rate was observed following the use of the augmentation option (2/86 patients (2.3%) vs. 16/178 patients (9.0%), p = 0.04). In particular, there were no cases of cut-out or cut-through among patients who underwent augmentation as part of osteosynthesis. CONCLUSIONS: Overall reoperation rate after surgical treatment of proximal femoral fractures utilizing the Proximal Femoral Nail Antirotation (PFNA) was 6.8%, with 23 additional surgeries performed in 18 patients. The usage of the PFNA with augmentation showed equally good implant positioning, excellent healing rates and fewer postoperative complications compared to the PFNA implant alone with a similar overall duration of surgery.

Setting proficiency standards for simulation-based mastery learning of short antegrade femoral nail osteosynthesis: a multicenter study.

BACKGROUND AND PURPOSE: Orthopedic trainees frequently perform short antegrade femoral nail osteosynthesis of trochanteric fractures, but virtual reality simulation-based training (SBT) with haptic feedback has been unavailable. We explored a novel simulator, with the aim of gathering validity evidence for an embedded test and setting a credible pass/fail standard allowing trainees to practice to proficiency. PATIENTS AND METHODS: The research, conducted from May to September 2020 across 3 Danish simulation centers, utilized the Swemac TraumaVision simulator for short antegrade femoral nail osteosynthesis. The validation process adhered to Messick's framework, covering all 5 sources of validity evidence. Participants included novice groups, categorized by training to plateau (n = 14) or to mastery (n = 10), and experts (n = 9), focusing on their performance metrics and training duration. RESULTS: The novices in the plateau group and experts had hands-on training for 77 (95% confidence interval [CI] 59-95) and 52 (CI 36-69) minutes while the plateau test score, defined as the average of the last 4 scores, was 75% (CI 65-86) and 96% (CI 94-98) respectively. The pass/fail standard was established at the average expert plateau test score of 96%. All novices in the mastery group could meet this standard and interestingly without increased hands-on training time (65 [CI 46-84] minutes). CONCLUSION: Our study provides supporting validity evidence from all sources of Messick's framework for a simulation-based test in short antegrade nail osteosynthesis of intertrochanteric hip fracture and establishes a defensible pass/fail standard for mastery learning of SBT. Novices who practiced using mastery learning were able to reach the pre-defined pass/fail standard and outperformed novices without a set goal for external motivation.

Hip biomechanics in early recovery following fixation of intertrochanteric fractures: Results from a randomised controlled trial.

Single and dual integrated screw femoral nails are both commonly used to treat intertrochanteric fractures. This study investigated if using single or dual integrated screw femoral nails result in different post-operative hip joint loading. In the presence of differences, we investigated potential contributing factors. Patients were randomised for treatment via single screw (Stryker, Gamma3) or dual-integrated screw nail (Smith and Nephew, Intertan). Pre-injury mobility levels were collected at enrolment. Hip radiographs and gait data were collected at six weeks (Gamma: 16; Intertan: 15) and six months (Gamma: 14; Intertan: 13) follow-up. The resultant hip joint reaction forces and abductor muscle forces were estimated using electromyography-assisted neuromusculoskeletal modelling during level walking gait. Our primary analysis focused on the resultant hip joint reaction force and abductor muscle forces. We compared between groups, across stance phase of walking gait, using statistical parametric mapping. At six weeks, the Intertan group showed a short (∼5% of stance phase) but substantial (33 % [0.3 × body weight] greater magnitude) resultant hip joint reaction force when compared to the Gamma group (P = 0.022). Higher gluteus medius forces (P = 0.009) were demonstrated in the Intertan group at six weeks. Harris Hip Scores followed the trend seen for the biomechanical outcomes with superior scores for the Intertan group at six weeks postoperative (P = 0.044). The use of dual-integrated screw femoral nails over single screw devices may allow for hip biomechanics more closely resembling normal hip function at earlier post-operative timepoints, but these appear to resolve by six months postoperative.