Litter and perch type matter already from the start: exploring preferences and perch balance in laying hen chicks.

Early chick environment, such as provision of litter and perches, can be a predictor of laying hen welfare. Inadequate or nonpreferred litter and perch types could have similar negative effects as those seen when not providing these resources at an early stage, such as increased feather pecking and cannibalism in adult flocks. However, suitable litter and perch types for chicks are not well explored. In the present project, 6 different types of litter (crushed straw pellets, hemp shavings, peat, sand, straw, wood shavings) and 6 different types of perches (narrow or wide forms of rope, flat or round wood) were presented in a controlled way (3 at a time) to chicks in 6 pens. Usage was compared in 93 chicks of Lohmann Selected Leghorn Classic divided across the pens, during their first 3 wk after hatch. Different litter types were seen to be preferred for different behaviors. The majority of dustbathing bouts occurred in sand and peat. Chicks foraged more in wood shavings, hemp shavings, and sand than in peat and pellets (P < 0.05). Perch width and shape were found to affect both usage and perch balance, measured as the probability of successful or problematic landings. The wide rope was generally used more during the first week (P < 0.05) and was used more for sleeping or resting (P < 0.05) than the other wide perch types. Furthermore, birds were more likely to land on the wide rope or on flat perches successfully than they were to have a problematic landing (P < 0.05). That birds were more likely to be observed preening on flat perches than on the potentially shaky rope perches could further reflect a sense of security. Our results suggest that presenting several litter types could better fulfill chicks' behavioral needs and that flat perches or a wide rope (4.5-cm diameter) could be appropriate perch types for laying hen chicks and thereby promote early perch use and training.

Comparison of WBGTs over Different Surfaces within an Athletic Complex.

Many athletic governing bodies are adopting on-site measurement of the wet-bulb globe temperature (WBGT) as part of their heat safety policies. It is well known, however, that microclimatic conditions can vary over different surface types and a question is whether more than one WBGT sensor is needed to accurately capture local environmental conditions. Our study collected matched WBGT data over three commonly used athletic surfaces (grass, artificial turf, and hardcourt tennis) across an athletic complex on the campus of the University of Georgia in Athens, GA. Data were collected every 10 min from 9:00 a.m. to 6:00 p.m. over a four-day period during July 2019. Results indicate that there is no difference in WBGT among the three surfaces, even when considered over morning, midday, and afternoon practice periods. We did observe microclimatic differences in dry-bulb temperature and dewpoint temperature among the sites. Greater dry-bulb and lower dewpoint temperatures occurred over the tennis and artificial turf surfaces compared with the grass field because of reduced evapotranspiration and increase convective transfers of sensible heat over these surfaces. The lack of difference in WBGT among the surfaces is attributed to the counterbalancing influences of the different components that comprise the index. We conclude that, in a humid, subtropical climate over well-watered grass, there is no difference in WBGT among the three athletic surfaces and that, under these circumstances, a single monitoring site can provide representative WBGTs for nearby athletic surfaces.

Broiler stress responses to light intensity, flooring type, and leg weakness as assessed by heterophil-to-lymphocyte ratios, serum corticosterone, infrared thermography, and latency to lie.

Stress and leg weakness are detrimental to broiler production, health, and welfare. Traditional methods to evaluate stress may be stressful to the bird because they are invasive and require handling and restraint. Two studies examined the effects of light intensity and flooring on the following in broilers: 1) traditional methods for assessing stress using heterophil-to-lymphocyte ratios and serum corticosterone (CORT) concentrations, 2) noninvasive measures of stress from infrared thermography (IRT) eye and beak surface temperatures, and 3) latency-to-lie (LTL) test times of birds tested individually and in groups of 5. Day-of-hatch male broiler chicks were placed into 6 pens (N = 120 chicks/pen). At 1 wk, pens were allocated to 3 light intensity treatments (2, 5, or 10 lux). At 4 wk, half of the birds from each pen were moved to a pen with wire flooring and the same light intensity. At 1, 4, 5, and 8 wk, blood samples were collected and IRT images of the heads of 5 clinically healthy broilers from each pen were captured. In study 2, IRT images of the heads of birds that became lame in the wire flooring pens were taken. There were no treatment effects on the LTL times of birds tested in groups or individually (P > 0.05). On day 56 in study 1, birds on wire flooring had elevated heterophil-to-lymphocyte ratios and CORT concentrations (P ≤ 0.002) and depressed IRT eye and beak temperatures (P < 0.0001). In both studies, there were negative correlations between CORT concentrations and IRT beak surface temperatures (P < 0.05). Lame birds had lower IRT eye and beak surface temperatures than sound birds (P ≤ 0.004), and the IRT beak surface temperatures of lame birds were lower than their eye surface temperatures (P = 0.004) in study 2. These studies indicate that the IRT surface temperatures of the eye, and more distinctly of the beak, can be used as sensitive noninvasive indicators of stress.

Health, behaviour and growth performance of Charolais and Limousin bulls fattened on different types of flooring.

Intensive fattening of late-maturing breeds on concrete or rubberized slatted floors is the prevalent beef production system in mainland Europe. The rationale behind this study is that specific beef breeds with different slaughter weights might have a diverse response to different flooring systems. The study aimed at assessing whether growth performance, health, behaviour and claw condition of two beef breeds, Charolais (CH) and Limousine (LIM), would be affected by their housing on concrete (CS) or rubber-covered (RCS) fully slatted floor. A total of 228 CH (116 on CS; 112 on RCS) and 115 LIM (57 on CS; 58 on RCS) were housed in four and two commercial farms, respectively, in groups of 9.0 ± 2.1 animals/pen with an average space allowance of 3.1 ± 0.2 m2. Draining gaps of CS and RCS pens were 16.9 ± 1.7% and 11.6 ± 1.2% of the total surface, respectively. Bulls of both breeds had similar initial body weight (429.4 ± 31.5 kg for CH; 369.6 ± 31.7 kg for LIM), and they were slaughtered when they reached suitable finishing. Charolais had a higher final body weight (BW) than LIM (750.8 ± 8.6 v. 613.7 ± 10.9 kg; P < 0.01), and bulls of both breeds on RCS had higher average daily gain than on CS (1.47 ± 0.02 v. 1.39 ± 0.02 kg/day; P < 0.05). The percentage of bulls early culled or treated for locomotor disorders were reduced by RCS only for LIM, while RCS tended to prevent the occurrence of bursitis for both breeds. During two 8-h behavioural observations, bulls on RCS performed more head butt/displacements and chases than on CS, and they reduced the frequency of abnormal lying down events. The use of RCS increased mounts' frequency only in LIM, while its reduced drainage capacity impaired only the cleanliness of CH. Postmortem hoof inspection showed longer claw dorsal wall and diagonal lengths, and sharper toe angles for CH on RCS than LIM on both floors. Results of this study point out that fully slatted floors, regardless of being rubberized or not, are not suitable for bulls finished at a final BW above 700 kg due to their detrimental effects on health and welfare. The use of RCS could be recommended as an alternative to CS only if bulls are slaughtered at a lower final BW (around 600 kg), like in the case of LIM breed.

Does 'hacking' surface type affect equine forelimb foot placement, movement symmetry or hoof impact deceleration during ridden walk and trot exercise?

BACKGROUND: Both pleasure and competition horses regularly exercise on surfaces such as tarmac, gravel and turf during 'hacking'. Despite this, there is limited evidence relating to the effect of these surfaces upon foot-surface interaction. OBJECTIVES: To investigate forelimb foot placement, hoof vibration and movement symmetry in pleasure horses on three commonly encountered hacking surfaces. STUDY DESIGN: Quantitative gait study in a convenience sample. METHODS: Six horses regularly partaking in hacking exercise were ridden in walk and trot on all surfaces. Horses were equipped with one hoof-mounted, accelerometer and four body-mounted inertial measurement units (IMUs) to measure foot impact and movement symmetry. High-speed (400 FPS) video footage of foot-placement was acquired (dorsal, palmar, lateral views). Foot-impact and movement symmetry were analysed with a mixed effects model and Bowker symmetry tests for foot-placement analysis. RESULTS: Vibration power and frequency parameters increase as perceived surface firmness increases from grass, to gravel, to tarmac (P≤0.001). Vibration power parameters were consistently greater at trot compared with walk (P≤0.001), but the same was not true for vibration frequency (P≥0.2). Greatest movement asymmetry was recorded during grass surface trotting. No significant difference in foot-placement was detected between the three surfaces. MAIN LIMITATIONS: This was a field study using three commonly encountered hacking surfaces. Surface properties change easily with water content and temperature fluctuations so care must be taken when considering other similar surfaces, especially at different times of the year. Six leisure horses were used so the results may not be representative of horses of all types. CONCLUSIONS: Vibration parameters generally increase as perceived surface firmness increases. Increasing speed alters vibration power but not frequency. Further investigations are required to determine the role that this may play in the development of musculoskeletal disease in horses.

Welfare assessment in rabbits raised for meat and laboratory purposes in enclosures with two floor types: Perforated plastic with holes versus slats.

Due to welfare concerns and legal restrictions in certain countries, alternatives to wire net floors must be developed in rabbit husbandries. Also, there is a difference in regulations in Europe for laboratory rabbits vs. rabbits bred and kept for meat production. While there are regulations concerning floor design of enclosures for rabbits bred for meat production in many European countries, the European Directive 2010/63 lacks regulations for rabbits used for scientific purposes. This study compares two floors, which meet the Austrian legal requirements for growing rabbits intended for consumption as well as the requirements for laboratory rabbits. The dual use of rabbits bred for meat production and applicable for scientific purposes would avoid the problem of surplus animals of specialized producers for laboratory rabbits. A noryl floor with 12 mm circular holes was compared to a 10 mm slatted plastic floor. Parameters were soiling of cages and animals, parasitic burden, clinical health, and losses using objective scoring. Soiling of cages and animals and coccidial oocytes were significantly higher on the floors with circular holes. Obvious signs of disease showed a non-significant trend to be more frequent in the group with circular holes. This was linked with significantly higher losses. In conclusion, our study clearly shows that the floor with circular hole design cannot be endorsed, although it meets legal requirements. The slatted floor type can be cautiously recommended; however, to assure animal welfare in laboratory rabbits, legal authorities in Europe should take on the responsibility of regulating floor design in this sector.

Sustainable floor type for managing turkey production in a hot climate.

Floor type management is an important factor in turkey production in hot climates exceeding 30°C. In this study, a total of 360 turkeys aged 4 wk were randomly distributed to investigate growth performance, carcass characteristics, certain health aspects (breast blisters score, footpad burns, hock discoloration, and plumage condition), and airborne conditions. Birds in the first group were raised on a littered floor (control; C), whereas birds in the other groups (T1, T2, T3, T4, and T5) were raised on cement, wire net, rubber mat, plastic and wooden slatted floors, respectively. The results indicated that growth performance and meat quality were improved, with increases in body weight, daily body weight gain, feed conversion ratio, and tenderness and juiciness values, when plastic and wooden slatted floors were used. Moreover, the use of plastic and wooden slatted floors attenuated body temperature, airborne dust particulates, and ammonia concentrations. In conclusion, placing plastic, wooden slatted, or wire floors reduced the incidence of health disorders and alleviated heat stress effects by decreasing body temperature and the heterophil to lymphocyte ratio. Thus, plastic and wooden slatted floors are suitable for growing turkeys under the conditions of this study.

Effects of different litter substrates and induced molt on production performance and welfare quality parameters of white Leghorn hens housed in multi-tiered aviary system.

More than 90% of the commercial egg production in the United States is pledged to be in cage-free systems by 2025. Management practices like induced molting and litter area management have come under scrutiny because of the housing system change. The aim of this study was to determine the welfare and production implications of different litter substrates and also evaluate induced molting of hens in a cage-free system. Bovan White hens were housed in a multi-tier aviary system with daily access to open litter area of either Astroturf (AT), wood shavings (SH), or straw (ST) and bare concrete floor (CO) serving as control. At 68 wk of age, molt was induced in half of the hens whereas the other half continued without molting to 116 wk. Production and welfare parameters were measured periodically throughout first and second cycles. Litter substrate did not influence hen-day production and case-weight measurements. However, CO had the lowest total number of eggs produced during the first cycle (P < 0.05). Hen-day percentage was approximately 14% greater in molted hens during the second cycle with egg case weight being heavier in non-molt hens toward the end of second cycle (P < 0.05). The only welfare parameter influenced by litter substrate during the first cycle was a greater crop feather loss in AT than ST at mid-lay (P < 0.05). Keel deformations increased with age irrespective of the litter substrate with 91.5% of palpated hens having keel deformations at the end of first cycle (P < 0.05). Molting did not influence the keel palpation and footpad scores whereas frequency of moderate comb wound was greater in molt hens during molt (P < 0.05). Severe feather loss was seen in non-molt hens during the second cycle (P < 0.05). Litter substrate does not affect production and physical parameters of welfare of hens in a multi-tier aviary system. Additionally, induced molting can be successfully carried out in the multi-tier cage-free system.

Poultry rearing on perforated plastic floors and the effect on air quality, growth performance, and carcass injuries - Experiment 2: Heat stress situation.

Previously, we reported the effect of rearing conditions (plastic floors and air quality) on carcass injury development of broiler chickens at thermal comfort. In this study, the same rearing conditions were tested at thermal stress. The birds were reared in 2 climatic chambers, and the experiment followed a completely randomized design with one factor, flooring material: wood shaving or perforated plastic. The birds were divided into 16 experimental pens, being 8 females and 8 males. The studied parameters were the same as the previous study (ammonia concentration, carbon dioxide, performance, carcass yield, and variability, and scores of hygiene, gait and chest, and hocks and footpad lesions). Higher ammonia (15 ppm vs. 4 ppm) and carbon dioxide (1,000 ppm vs. 850 ppm) concentration was seen at d 42 for the wood shavings floor as compared to the perforated plastic floor, respectively. Regarding gender, males had better performance than females at 42 d of age on both floor types. Males reared on wood shavings showed a higher meat production (29.049 kg/m2) than females (24.700 kg/m2). There were observed breast lesion incidences of 10.4% (score 1) in males reared on the plastic floor, as well higher incidence of hock injury and footpad dermatitis. Chickens reared on plastic flooring showed better hygiene than chickens reared on wood shavings. Our findings revealed that the use of perforated plastic flooring in a heat stress situation can improve the air quality (less CO2 and NH3 concentration) and bird cleanliness. On the other hand, chickens are more susceptible to develop lesions in the breast, hock, and footpad. We conclude that the use of plastic flooring in heat stress conditions needs more attention, since chickens are more susceptible to develop lesions on the carcass, being a source of pain, impairing bird wellbeing and causing losses in meat production.

Effect of space allowance and flooring on the behavior of pregnant ewes.

Space allowance recommendations for pregnant ewes vary considerably. The aim of this experiment was to investigate the effect of space allowance and floor type on activity, lying position, displacements, and aggressive interactions in pregnant ewes. A 3 × 2 factorial experiment was conducted with space allowance (0.75, 1.50, and 2.25 m/ewe) and type of flooring (straw bedding and expanded metal flooring) as the main factors. A total of 48 pregnant ewes were randomly assigned to 6 groups with 8 ewes in each group. All groups were exposed to each treatment for 7 d. The ewes were video recorded for 24 h at the end of each treatment period and general activity, lying position in the pen, and social lying position were scored every 15 min. Displacements and aggressive interactions were scored continuously from 1030 to 1430 h. Mean lying time ( < 0.0001) and time spent lying simultaneously ( < 0.0001) increased whereas time spent eating ( < 0.001) and standing ( < 0.001) decreased when space allowance increased from 0.75 to 1.50 m/ewe. Further increasing the space allowance to 2.25 m/ewe, however, had no effect on these parameters. Sitting was observed only in the 0.75 m/ewe treatment. Type of flooring had no significant effect on general activity. Ewes in the straw bedding treatment spent more time lying in the middle of the pen than ewes on expanded metal ( < 0.0001), but space allowance had no significant effect on this parameter. The proportion of time spent lying against side walls increased ( < 0.0001) whereas the proportion of time spent lying against the back wall decreased ( < 0.0001) when the space allowance was increased. In general, the distance between the ewes when lying significantly increased when space allowance increased from 0.75 to 1.50 m/ewe. Total number of displacements when lying ( < 0.0001) and aggressive interactions when active ( < 0.001) decreased when space allowance increased from 0.75 to 1.50 m/ewe and further slightly decreased, although the decrease was significant only for displacements when lying, when space allowance increased to 2.25 m/ewe. Low-ranked ewes were not exposed to more aggressive behavior than high-ranked ewes. In conclusion, increasing space allowance from 0.75 to 1.50 m/ewe had positive effects on activity and behavior in pregnant ewes, but further increasing space allowance to 2.25 m/ewe had limited effects, as did type of flooring. Hence, recommended space allowance for pregnant ewes should not be lower than 1.50 m/ewe.

[Comparative field study of litter moisture and footpad alterations during the rearing period of fattening turkeys]. / Vergleichende Feldstudie zur Einstreu- feuchtigkeit und zur Fussballengesundheit während der Aufzucht von Mastputen.

In the course of a nationwide performed field study from 2010 to 2012, the footpad health of conventionally kept fattening turkeys and their rearing conditions were studied and compared to results from litter moisture measurements. In each case two rearing periods from 24 rearing farms were chosen and visited 3 to 5 days after delivery of the poults (examination 1) and again during the days 22 to 35 (examination 2). In the course of each flock inspection 60 randomly chosen turkeys were examined by adspection and palpation. Litter samples from drinking, feeding and resting areas were taken using the Darr procedure to measure moisture. Data regarding rearing conditions was collected from the farmer using standardized questionnaires. The litter moisture was 10% (6-20%) before the birds' entered the barn. At the time of examination 1 litter moisture of 43% (14-67%) in the drinking zone, 28% (12-66%) in the feeding zone, and 13% (8-31%) in the resting area were measured. At the time of examination 2 the litter moisture measurements showed 51% (32-72%) in the drinking zone, 27% (13-56% in the feeding zone and 28% (16-53%) in the resting area. At the time of examination 127.3% of the poults had footpad alterations, during examination 2 that number increased to 63.3% with 12.1% showing epithelial necrosis. The young turkeys on the three most commonly used litter substrates showed the following results at the time of examination 2: when held on straw pellets 58%, on wood shavings 29%, and on straw 17% showed unaltered footpads. Regarding the housing conditions the examinations showed specifically differences in stocking rate, drinking system and litter management.

The influence of floor type before and after 10 weeks of age on osteochondrosis in growing gilts.

Osteochondrosis (OC) is a degenerative joint condition developing in a short time frame in young growing gilts that may cause lameness at an older age, affecting welfare and leading to premature culling of breeding sows. Causes of OC are multifactorial including both genetic and environmental factors. Floor type has been suggested to affect OC prevalence and effects might be age dependent during the rearing period. The aim of this study was to investigate possible age-dependent effects of floor type, conventional concrete partially slatted versus wood shavings as deep bedding, on OC prevalence in gilts (Dutch Large White × Dutch Landrace) at slaughter (24 wk of age; 106.5 [14.7 SD] kg of BW). At weaning (4 wk of age; 6.9 [1.3 SD] kg of BW), 212 gilts were subjected to 1 of 4 flooring regimens. Gilts were either subjected to a conventional floor from weaning until slaughter (CC), wood shavings as bedding from weaning until slaughter (WW), a conventional floor from weaning until 10 wk of age after which gilts were switched to wood shavings as bedding (CW), or wood shavings as bedding from weaning until 10 wk of age after which gilts were switched to a conventional floor (WC). After slaughter the elbow, hock, and knee joints were macroscopically examined for OC and scored on a 5 point scale where 0 indicates no OC and 4 indicates the severest form of OC. There was no significant difference (P > 0.4) between treatments on the overall OC prevalence for any joint assessed or at the animal level (all joints combined). At the animal level, however, gilts had greater odds to have OC scores 3 and 4 in the CW treatment (odds ratios [OR] = 2.3; P = 0.05), WC treatment (OR = 2.6; P = 0.02), and WW treatment (OR = 3.7; P < 0.001) compared with gilts in the CC treatment. The results indicate that there are no age-dependent effects of floor types on overall OC prevalence. However, wood shavings as bedding seems to increase the odds for severe OC and might affect animal welfare in the long term.

Factors influencing the onset and progression of pododermatitis in captive flamingos (Phoenicopteridae).

Pododermatitis is a worldwide problem in captive flamingos. We performed an evaluation of different influence factors (age, sex, weight, origin, breeding status) and a comparison of foot lesions between several zoological institutions and the feet of free-ranging Greater flamingos (Phoenicopterus roseus). A scoring system was used to determine the prevalence and types of lesions and severity. Cracks and nodules developed as early as 3 months of age and papillomatous growths as early as 6 to 7 months of age in captivity. Nodules with ulceration occurred significantly more often in birds older than 31 years and heavier than 4 kg. The comparison of different institutions revealed that birds kept in enclosures with natural-floored water ponds had significantly less severe lesions than birds kept in concrete water ponds. None of the free-ranging flamingos, which live on a muddy underground, showed any lesion. This study demonstrates that flooring, weight and age are important in the onset and progression of pododermatitis in flamingos.

Les pododermatites représentent dans tout le monde un problème chez les flamants détenus en captivité. Dans la présente étude, on examine divers facteurs (âge, sexe, poids, origine, couvaison) pouvant influencer cette pathologie et on compare les lésions constatées dans diverses conditions de détention entre elles ainsi que par rapport aux pattes de flamants roses (Phoenicopterus roseus) sauvages. La prévalence et les divers types de lésions, de même que leur gravité sont déterminées sur la base d'un catalogue de critères. Des fissures et des nodules se développent déjà chez des animaux âgés de trois mois; on peut observer des proliférations papillomateuses pour la première fois vers l'âge de 6 à 7 mois. Les nodules avec ulcération centrale s'observent significativement plus souvent chez des animaux de plus de 31 ans de même que chez ceux qui pèsent plus de 4 kg. Les flamants provenant d'enclos avec des étangs au fond naturel présentent des lésions moins fréquentes et plus bénignes que ceux détenus dans des enclos avec des étangs au fond en béton. On n'a observé aucune lésion podale chez les flamants roses sauvages vivant sur un sol argileux. La présente étude démontre que le sol, le poids et l'âge jouent un rôle dans l'apparition et le développement des pododermatites chez les flamants détenus en captivité.

Comparisons of tibial accelerations when walking on a wood composite vs. a concrete mezzanine surface.

Mezzanine surfaces can be made from concrete, bar grate, or composite materials. Anecdotal data indicate that mezzanines in distribution centers made from composite materials, due to their increased compliance, may be a more comfortable working surface. Prior research suggested that a measure of tibial shock, peak tibial acceleration, could potentially discriminate the biomechanical differences between these surfaces. The objective of this study was to quantify differences in tibial accelerations as 27 people walked on mezzanines constructed from concrete and a wood composite material. Accelerometers were attached bilaterally to the shins of volunteers, and data were collected as they walked 30.5 m on each surface at their normal walking speed, a faster-than-normal walking speed, and a slower-than-normal walking speed. Peak acceleration values obtained from the leg with the highest values were compared. On average, the peak acceleration values were 5% higher on the concrete mezzanine as compared with the wood composite mezzanine (p = .036). These findings suggest that individuals working on mezzanines in distribution centers constructed from composite surfaces would potentially experience less discomfort associated with long exposure periods on these surfaces.

Quantification of the trade-off between force attenuation and balance impairment in the design of compliant safety floors.

Safety floors (also known as compliant floors) may reduce the risk of fall-related injuries by attenuating impact force during falls, but are only practical if they do not negatively affect balance and mobility. In this study, we evaluated seven safety surfaces based on their ability to attenuate peak femoral neck force during simulated hip impacts, and their influence on center of pressure (COP) sway during quiet and tandem stance. Overall, we found that some safety floors can attenuate up to 33.7% of the peak femoral impact force without influencing balance. More specifically, during simulated hip impacts, force attenuation for the safety floors ranged from 18.4 (SD 4.3)% to 47.2 (3.1)%, with each floor significantly reducing peak force compared with a rigid surface. For quiet stance, only COP root mean square was affected by flooring (and increased for only two safety floors). During tandem stance, COP root mean square and mean velocity increased in the medial-lateral direction for three of the seven floors. Based on the substantial force attenuation with no concomitant effects on balance for some floors, these results support the development of clinical trials to assess the effectiveness of safety floors at reducing fall-related injuries in high-risk settings.

The effect of flooring on musculoskeletal symptoms in the lower extremities and low back among female nursing assistants.

This study examines the effect of changing the floor from a 2-mm homogenous vinyl floor to a 4-mm heterogeneous vinyl floor (1.5-mm wear layer and 2.5-mm foam layer) on musculoskeletal symptoms in the lower extremities and low back among nursing assistants in a geriatric care centre. A pre-post design with a reference group consisting of nursing assistants from a similar geriatric care centre was used. Follow-up measurements were carried out 12 and 24 months after the intervention by means of questionnaires. At the 1-year follow-up, the pain intensity score in the feet of the intervention group had decreased compared with the baseline value and remained statistically significant at the 2-year follow-up. The decrease in pain intensity score of the feet in the intervention group was statistically significantly different from the reference group, both after 1 and 2 years. PRACTITIONER SUMMARY: The results show the importance of flooring in the workplace with regard to reducing musculoskeletal symptoms. Appropriate flooring is especially important in the female-dominated health care sector, where workers must stand or walk for long periods.

Accelerative forces associated with routine inhouse transportation of rodent cages.

Transportation of rodents has repeatedly been demonstrated to potentially affect research outcomes. In addition, rapid acceleration and deceleration have marked physiologic effects. The current study determined the accelerative forces associated with common types of animal transportation within the institution and means of reducing these effects. A rodent-sized (24 g) accelerometer was placed in a standard polycarbonate mouse cage, which then was hand-carried or loaded onto a plastic, small metal, or large metal cart. The cage then moved along a set path that included several flooring types and obstacles. Accelerative forces within the mouse cage varied by as much as 35 m/s(2) in as little as 1 s, primarily along the vertical axis (Z-axis). Measured acceleration was greatest with the plastic cart and lowest during hand-carrying. The placement of a towel under the cage dampened in-cage acceleration due to cart use by more than 50%, whereas a similarly located underpad had no significant effect. These data document that small rodents typically are exposed to considerable motion during transportation. The resulting physical and physiologic effects could affect study outcomes.

Ozone-surface reactions in five homes: surface reaction probabilities, aldehyde yields, and trends.

UNLABELLED: Field experiments were conducted in five homes during three seasons (summer 2005, summer 2006 and winter 2007) to quantify ozone-initiated secondary aldehyde yields, surface reaction probabilities, and trends any temporal over a 1.5-year interval. Surfaces examined include living room carpets, bedroom carpets, kitchen floors, kitchen counters, and living room walls. Reaction probabilities for all surfaces for all seasons ranged from 9.4 x 10(-8) to 1.0 x 10(-4). There were no significant temporal trends in reaction probabilities for any surfaces from summer 2005 to summer 2006, nor over the entire 1.5-year period, indicating that it may take significantly longer than this period for surfaces to exhibit any 'ozone aging' or lowering of ozone-surface reactivity. However, all surfaces in three houses exhibited a significant decrease in reaction probabilities from summer 2006 to winter 2007. The total yield of aldehydes for the summer of 2005 were nearly identical to that for summer of 2006, but were significantly higher than for winter 2007. We also observed that older carpets were consistently less reactive than in newer carpets, but that countertops remained consistently reactive, probably because of occupant activities such as cooking and cleaning. PRACTICAL IMPLICATIONS: Ozone reactions taking place at indoor surfaces significantly influence personal exposure to ozone and volatile reaction products. These field studies show that indoor surfaces only slowly lose their ability to react with ozone over several year time frames, and that this is probably because of a combination of large reservoirs of reactive coatings and periodic additions of reactive coatings in the form of cooking, cleaning, and skin-oil residues. When considering exposure to ozone and its reaction products and in the absence of dramatic changes in occupancy, activities or furnishings, indoor surface reactivity is expected to change very slowly.

Epidemiology of cheerleading fall-related injuries in the United States.

CONTEXT: Over the past several decades, cheerleaders have been performing fewer basic maneuvers and more gymnastic tumbling runs and stunts. As the difficulty of these maneuvers has increased, cheerleading injuries have also increased. OBJECTIVE: To describe the epidemiology of cheerleading fall-related injuries by type of cheerleading team and event. DESIGN: Prospective injury surveillance study. SETTING: Participant exposure and injury data were collected from US cheerleading teams via the Cheerleading RIO (Reporting Information Online) surveillance tool. PATIENTS OR OTHER PARTICIPANTS: Athletes from 412 enrolled cheerleading teams who participated in official, organized cheerleading practices, pep rallies, athletic events, or cheerleading competitions. MAIN OUTCOME MEASURE(S): The numbers and rates of cheerleading fall-related injuries during a 1-year period (2006-2007) are reported. RESULTS: A total of 79 fall-related injuries were reported during the 1-year period. Most occurred during practice (85%, 67/79) and were sustained by high school cheerleaders (51%, 40/79). A stunt or pyramid was being attempted in 89% (70/79) of cases. Fall heights ranged from 1 to 11 ft (0.30-3.35 m) (mean = 4.7 + or - 2.0 ft [1.43 + or - 0.61 m]). Strains and sprains were the most common injuries (54%, 43/79), and 6% (5/79) of the injuries were concussions or closed head injuries. Of the 15 most serious injuries (concussions or closed head injuries, dislocations, fractures, and anterior cruciate ligament tears), 87% (13/15) were sustained while the cheerleader was performing on artificial turf, grass, a traditional foam floor, or a wood floor. The fall height ranged from 4 to 11 ft (1.22-1.52 m) for 87% of these cases (13/15). CONCLUSIONS: Cheerleading-related falls may result in severe injuries and even death, although we report no deaths in the present study. The risk for serious injury increases as fall height increases or as the impact-absorbing capacity of the surfacing material decreases (or both).