A novel radiolabeled graft polymer: Investigation of the radiopharmaceutical potential using Albino Wistar rats.

Fe3O4 magnetic graft-Lys-poly(HEMA) was synthesized, labeled with 99mTc for the first time and its radiopharmaceutical potential was investigated using animal models in this study. Quality control procedures were carried out using thin layer radiochromatography. The labeling yield of radiolabeled polymer was found to be about 100%. Then, stability and lipophilicity were determined. The lipophilicity of 99mTc labeled Fe3O4 graft-Lys-poly(HEMA) was found to be 3.77. The serum stability experiments demonstrated that approximately 100% of radiolabeled polymer existed as an intact complex in the rat serum within 240 min. Biodistribution of radiolabeled magnetic graft-Lys-poly(HEMA) was performed on female Albino Wistar rats by scintigraphy and biodistribution studies. High uptake was seen in the stomach, the pancreas, brain, ovarian, intestines and the breast.

Biodegradable HEMA-based hydrogels with enhanced mechanical properties.

Hydrogels are widely used in the biomedical field. Their main purposes are either to deliver biological active agents or to temporarily fill a defect until they degrade and are followed by new host tissue formation. However, for this latter application, biodegradable hydrogels are usually not capable to sustain any significant load. The development of biodegradable hydrogels presenting load-bearing capabilities would open new possibilities to utilize this class of material in the biomedical field. In this work, an original formulation of biodegradable photo-crosslinked hydrogels based on hydroxyethyl methacrylate (HEMA) is presented. The hydrogels consist of short-length poly(2-hydroxyethyl methacrylate) (PHEMA) chains in a star shape structure, obtained by introducing a tetra-functional chain transfer agent in the backbone of the hydrogels. They are cross-linked with a biodegradable N,O-dimethacryloyl hydroxylamine (DMHA) molecule sensitive to hydrolytic cleavage. We characterized the degradation properties of these hydrogels submitted to mechanical loadings. We showed that the developed hydrogels undergo long-term degradation and specially meet the two essential requirements of a biodegradable hydrogel suitable for load bearing applications: enhanced mechanical properties and low molecular weight degradation products. © 2015 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 104B: 1161-1169, 2016.

The copolymer P(HEMA-co-SS) binds gluten and reduces immune response in gluten-sensitized mice and human tissues.

BACKGROUND & AIMS: Copolymers of hydroxyethyl methacrylate and styrene sulfonate complex with isolated gliadin (the toxic fraction of gluten) and prevent damage to the intestinal barrier in HLA-HCD4/DQ8 mice. We studied the activity toward gluten and hordein digestion and biologic effects of poly(hydroxyethyl methacrylate-co-styrene sulfonate (P(HEMA-co-SS)). We also investigated the effect of gliadin complex formation in intestinal biopsy specimens from patients with celiac disease. METHODS: We studied the ability of P(HEMA-co-SS) to reduce digestion of wheat gluten and barley hordein into immunotoxic peptides using liquid chromatography-mass spectrometry. The biodistribution and pharmacokinetic profile of orally administered P(HEMA-co-SS) was established in rodents using tritium-labeled polymer. We assessed the capacity of P(HEMA-co-SS) to prevent the immunologic and intestinal effects induced by a gluten-food mixture in gluten-sensitized HLA-HCD4/DQ8 mice after short-term and long-term administration. We measured the effects of gliadin complex formation on cytokine release ex vivo using intestinal biopsy specimens from patients with celiac disease. RESULTS: P(HEMA-co-SS) reduced digestion of wheat gluten and barley hordein in vitro, thereby decreasing formation of toxic peptides associated with celiac disease. After oral administration to rodents, P(HEMA-co-SS) was predominantly excreted in feces, even in the presence of low-grade mucosal inflammation and increased intestinal permeability. In gluten-sensitized mice, P(HEMA-co-SS) reduced paracellular permeability, normalized anti-gliadin immunoglobulin A in intestinal washes, and modulated the systemic immune response to gluten in a food mixture. Furthermore, incubation of P(HEMA-co-SS) with mucosal biopsy specimens from patients with celiac disease showed that secretion of tumor necrosis factor-α was reduced in the presence of partially digested gliadin. CONCLUSIONS: The copolymer P(HEMA-co-SS) reduced digestion of wheat gluten and barley hordein and attenuated the immune response to gluten in a food mixture in rodents. It might be developed to prevent or reduce gluten-induced disorders in humans.

Polyurethane/poly(hydroxyethyl methacrylate) semi-interpenetrating polymer networks for biomedical applications.

The thermodynamic miscibility, morphology, phase distribution, mechanical properties, surface properties, water sorption, bacterial adhesion and cytotoxicity of semi-interpenetrating polymer networks (semi-IPNs) based on crosslinked polyurethane (PU) and poly(hydroxyethylmethacrylate) (PHEMA) were studied to give an insight into their structure and properties. The free energies of mixing of the two polymers in semi-IPNs have been determined and it was shown that the values are positive and depend on the amount of PHEMA. This demonstrates that the components are immiscible, the extent of which is dependent upon variations in composition. The morphology of the semi-IPNs was analyzed with scanning electron microscopy and tapping mode atomic force microscopy (TMAFM). The micrographs of the semi-IPNs and TMAFM phase images indicated that distinct phase separation at the nanometer scale is observed. The mechanical properties reflect the changes in structure of semi-IPNs with composition. The stress at break increases from 3.4 MPa to 23.9 MPa, and the Young's modulus from 12.7 MPa up to 658.5 MPa with increasing amounts of PHEMA, but strain at break has a maximum at 40.4% PHEMA. The bacterial adhesion and cytotoxicity data suggest that semi-IPNs with PHEMA content above 22% may be used for biomedical material applications.

Modification of capillary electrophoresis capillaries by poly(hydroxyethyl methacrylate), poly(diethylene glycol monomethacrylate) and poly(triethylene glycol monomethacrylate).

Modification of capillary electrophoresis (CE) capillaries by poly(hydroxyethyl methacrylate) (poly(HEMA), poly(diethylene glycol monomethacrylate) (poly(DEGMA) and poly(triethylene glycol monomethacrylate) (poly(TEGMA), was studied. Methods based on physical adsorption of the modifier and on its chemical binding were compared on the basis of the electroosmotic flow (EOF) reproducibility, the EOF dependence on the pH, the symmetry of the peak of positively charged tyramine, the stability of the coating and the separation of standard and milk proteins in the modified capillaries. Reproducible coatings were obtained by chemical binding of the polymers to the capillary walls and by coating with a solution of a polymer, as also demonstrated by the atomic force microscopy.

Modelling mucoadhesion by use of surface energy terms obtained from the Lewis acid-Lewis base approach. II. Studies on anionic, cationic, and unionisable polymers.

Surface energies of carbopol, chitosan, hydroxypropyl cellulose (HPC) and poly(HEMA) were assessed from contact angle and surface tension experiments. The surface energy was considered in terms of an apolar Lifshitz-van der Waals term and a polar acid-base term, which in turn is divided into electron donor and electron receptor (Lewis acid-Lewis base) contributions. Using these surface energy terms the interaction of dry and hydrated polymer with mucin in the presence of either artificial gastric or intestinal fluid, or saline was predicted. The predictions were related to measured forces of detachment. There was a significant difference between the surface energy on dry and hydrated HPC and also for carbopol; for the other polymers either the surface energy of the hydrated material was not detectable, or the effect of hydration was minimal. There were good correlations between mucoadhesive strength and the calculated free energies of interaction between mucin and polymer in the presence of each of the fluids, for each individual polymer. Thus, two trends were observed, one for unionisable and the other for ionisable polymers. It is argued that the increased mucoadhesion seen with ionisable polymers (compared with the predicted value based on results of unionisable polymers) is a direct result of the ionic interaction. No attempt has been made to correct for the ionisation effect, but the surface energy predictions provide insight into the mechanism of the mucoadhesion process. This approach is useful for understanding and predicting interactions between different materials and biological components.

Biologically modified PHEMA beads for hemoperfusion: preliminary studies.

Polyhydroxyethylmethacrylate (PHEMA) beads were prepared by phase separation polymerization. Hydroxyl groups on PHEMA beads were activated with CNBr at alkaline pH. Adsorption of heparin, blood proteins (i.e. albumin, fibrinogen and gamma-globulin), protein A, HIgG and DNA on these beads were studied. Preparation and activation procedures are given here. The preliminary results of these studies are also reported.