Legionella bononiensis sp. nov., isolated from a hotel water distribution system in northern Italy.

Legionella-like isolates, strains 27fs60, 30fs61 and 30cs62T, were isolated from a hotel water distribution system in the Emilia-Romagna region, Italy. Isolates were Gram- and Ziehl Neelsen-stain-negative, rod-shaped, with transitory flagella presence and able to grow at 32-37 °C (with an optimum at 32 °C) on buffered charcoal-yeast extract agar with l-cysteine, glycine-vancomycin-polymyxin B-cycloheximide agar and Wadowsky-Yee medium agar. The strains showed positive reactions for oxidase, hippurate and gelatinase and a weakly positive reaction for catalase. Based on the EUCAST cut-off, strain 30cs62T was resistant to ciprofloxacin (5 mg l-1). The mip and rpoB gene sequences of the three strains showed close matches to those of Legionella quateirensis ATCC 49507T with similarity values of 98.2 and 94.5 %, respectively. Whole genome sequencing of the three strains was performed, resulting in G+C contents of 39.0, 39.1 and 39.0 mol%, respectively. The identity percentage measured by average nucleotide identity between the three strains and their respective closest strains were: 91.32 % L. quateirensis NCTC 12376T, 91.45 % L. quateirensis ATCC 49507T and 91.45 % L. quateirensis ATCC 49507T, respectively. The digital DNA-DNA hybridization analysis demonstrated how the isolates were separated from the most related phylogenetic Legionella species (L. quateirensis ATCC 49507T, ≤40.10 % DNA-DNA relatedness). The concatenated phylogenetic tree based on 16S rRNA, mip, rpoB and rnpB genes, shows a close relationship with L. quateirensis ATCC 49507T. The results obtained confirm the status of an independent species. The name proposed for this species is Legionella bononiensis sp. nov. with 30cs62T (=ATCC TSD-262T=DSM 112526T) as the type strain.

Changes in fluidity of the E. coli outer membrane in response to temperature, divalent cations and polymyxin-B show two different mechanisms of membrane fluidity adaptation.

The outer membrane (OM) is an essential component of the Gram-negative bacterial cell envelope. Restricted diffusion of integral OM proteins and lipopolysaccharide (LPS) that constitute the outer leaflet of the OM support a model in which the OM is in a semi-crystalline state. The low fluidity of the OM has been suggested to be an important property of this membrane that even contributes to cell rigidity. The LPS characteristics strongly determine the properties of the OM and the LPS layer fluidity has been measured using different techniques that require specific conditions or are technically challenging. Here, we characterize the Escherichia coli LPS fluidity by evaluating the lateral diffusion of the styryl dye FM4-64FX in fluorescence recovery after photobleaching experiments. This technique allowed us to determine the effect of different conditions and genetic backgrounds on the LPS fluidity. Our results show that a fraction of the LPS can slowly diffuse and that the fluidity of the LPS layer adapts by modifying the diffusion of the LPS and the fraction of mobile LPS molecules.

Selective Spectrofluorimetric Protocol for Determination of Commonly Used Gram-negative Bactericidal Drug in Combined Pharmaceutical Dosage Forms and Human Plasma.

Gram-negative bacteria cause infections such as skin infection, meningitis, and pneumonia in human being. Gram-negative bacteria are highly resistant to most availaible bactericidal drugs. One of the most commonly used Gram-negative bactericidal drug is Polymyxin B sulfate (PMS). In addition, it is used in cases of highly resistant Gram-negative bacterial infections. The widespread of PMS necessitate the development of an exceedingly sensitive and selective fluorimetric assay for its determination in pure form, different pharmaceutical dosage forms, and human plasma. The presented method is used to determine PMS in their dosage form (vials) and combined pharmaceutical formulations (skin and eye ointments) with a high degree of accuracy and selectivity. The described procedure relies on the structure of a derivative of a high degree of fluorescence called dihydropyridine, via the condensation of the amino moiety of PMS with two equivalents of acetylacetone in the presence of formaldehyde and Teorell buffer (pH = 3). The fluorescent product was measured at 471 nm (λex = 402 nm). The linearity ranged from 100-3000 ng mL-1 of PMS with an excellent r2 of 0.9998. LOD and LOQ were 27.16 ng mL-1 and 82.30 ng mL-1, respectively. Owing to the developed method's high selectivity, it was successfully utilized for assay of PMS, in the ointment, in the presence of oxytetracycline as an active ingredient. Furthermore, the procedure applied for the estimation of parenteral PMS in human plasma with very good mean recovery 97.42 ± 1.46.

Benchtop-fabricated lipid-based electrochemical sensing platform for the detection of membrane disrupting agents.

There are increasing concerns about the danger that water-borne pathogens and pollutants pose to the public. Of particular importance are those that disrupt the plasma membrane, since loss of membrane integrity can lead to cell death. Currently, quantitative assays to detect membrane-disrupting (lytic) agents are done offsite, leading to long turnaround times and high costs, while existing colorimetric point-of-need solutions often sacrifice sensitivity. Thus, portable and highly sensitive solutions are needed to detect lytic agents for health and environmental monitoring. Here, a lipid-based electrochemical sensing platform is introduced to rapidly detect membrane-disrupting agents. The platform combines benchtop fabricated microstructured electrodes (MSEs) with lipid membranes. The sensing mechanism of the lipid-based platform relies on stacked lipid membranes serving as passivating layers that when disrupted generate electrochemical signals proportional to the membrane damage. The MSE topography, membrane casting and annealing conditions were optimized to yield the most reproducible and sensitive devices. We used the sensors to detect membrane-disrupting agents sodium dodecyl sulfate and Polymyxin-B within minutes and with limits of detection in the ppm regime. This study introduces a platform with potential for the integration of complex membranes on MSEs towards the goal of developing Membrane-on-Chip sensing devices.

Study of interactions between carboxylated core shell magnetic nanoparticles and polymyxin B by capillary electrophoresis with inductively coupled plasma mass spectrometry.

In this work, interactions of carboxylated core shell magnetic nanoparticles with polymyxin B sulfate were studied by connecting capillary electrophoresis with inductively coupled plasma mass spectrometry. The interaction was probed by affinity mode of capillary electrophoresis with 25 mM phosphate buffer at physiological pH. 54Fe, 56Fe, 57Fe, 34S, and 12C isotopes were used to monitor the migration of an electroosmotic flow marker and the interaction of the nanoparticles with polymyxin B. The analysis of interaction data showed two distinct interaction regions, one with low polymyxin B concentration, the second with high polymyxin B concentration. These regions differed in the strength of the interaction, 1.49 × 107 M-1 and 1.60 × 104 M-1, and in the stoichiometry of 0.7 and 3.5, respectively. These differences can be explained by the decrease of electrostatic repulsion between nanoparticles caused by polymyxin B. This is also in agreement with the nanoparticles peak shapes: sharp for low polymyxin B concentrations and broad for high polymyxin B concentrations.

Tarsocrural joint polymyxin B concentrations achieved following intravenous regional limb perfusion of the drug via a saphenous vein to healthy standing horses.

OBJECTIVE: To determine whether therapeutic concentrations (> 0.5 to 1.0 µg/mL) of polymyxin B (PB) were achieved in the tarsocrural joint of horses when the drug was administered by IV regional limb perfusion (IV-RLP) via a saphenous vein at doses of 25, 50, and 300 mg and to describe any adverse systemic or local effects associated with such administration. ANIMALS: 9 healthy adult horses. PROCEDURES: In the first of 2 experiments, 6 horses each received 25 and 50 mg of PB by IV-RLP via a saphenous vein with at least 2 weeks between treatments. For each treatment, a tourniquet was placed at the midmetatarsus and another was placed midway between the stifle joint and tarsus. Both tourniquets were removed 30 minutes after the assigned dose was administered. Blood and tarsocrural joint fluid samples were collected for determination of PB concentration before and at predetermined times after drug administration. In experiment 2, 4 horses were administered 300 mg of PB by IV-RLP in 1 randomly selected pelvic limb in a manner identical to that used in experiment 1. RESULTS: For all 3 doses, the mean synovial fluid PB concentration was > 10 times the therapeutic concentration and below the level of quantification at 30 and 1,440 minutes after drug administration, respectively. No adverse systemic or local effects were observed following PB administration. CONCLUSIONS AND CLINICAL RELEVANCE: Results suggested that IV-RLP of PB might be a viable alternative for treatment of horses with synovial infections caused by gram-negative bacteria.

Facile Generation of Biomimetic-Supported Lipid Bilayers on Conducting Polymer Surfaces for Membrane Biosensing.

Membrane biosensors that can rapidly sense pathogen interaction and disrupting agents are needed to identify and screen new drugs to combat antibiotic resistance. Bioelectronic devices have the capability to read out both ionic and electrical signals, but their compatibility with biological membranes is somewhat limited. Supported lipid bilayers (SLBs) have served as useful biomimetics for a myriad of research topics involving biological membranes. However, SLBs are traditionally made on inert, rigid, inorganic surfaces. Here, we demonstrate a versatile and facile method for generating SLBs on a conducting polymer device using a solvent-assisted lipid bilayer (SALB) technique. We use this bioelectronic device to form both mammalian and bacterial membrane mimetics to sense the membrane interactions with a bacterial toxin (α-hemolysin) and an antibiotic compound (polymyxin B), respectively. Our results show that we can form high quality bilayers of both types and sense these particular interactions with them, discriminating between pore formation, in the case of α-hemolysin, and disruption of the bilayer, in the case of polymyxin B. The SALB formation method is compatible with many membrane compositions that will not form via common vesicle fusion methods and works well in microfluidic devices. This, combined with the massive parallelization possible for the fabrication of electronic devices, can lead to miniaturized multiplexed devices for rapid data acquisition necessary to identify antibiotic targets that specifically disrupt bacterial, but not mammalian membranes, or identify bacterial toxins that strongly interact with mammalian membranes.

Polymyxin B as an inhibitor of lipopolysaccharides contamination of herb crude polysaccharides in mononuclear cells.

Lipopolysaccharides (LPS) contamination in herbal crude polysaccharides is inevitable. The present study was performed to explore the effect of polymyxin B on abolishing the influence of LPS contamination in mononuclear cells. LPS was pretreated with polymyxin B sulfate (PB) at different concentrations for 1, 5 or 24 h, and then used to stimulate RAW264.7 and mouse peritoneal macrophages (MPMs). The nitric oxide (NO) and tumor necrosis factor-α (TNF-α) in cell culture supernatant, as the indications of cell response, were assayed. Bupleurum chinensis polysaccharides (BCPs) with trace amount contamination of LPS was treated with PB. 30 µg·mL-1 of PB, treating LPS (10 and 1 000 ng·mL-1 in stimulating RAW264.7 and MPMs respectively) at 37 °C for 24 h, successfully abolished the stimulating effect of LPS on the cells. When the cells were stimulated with LPS, BCPs further promoted NO production. However, pretreated with PB, BCPs showed a suppression of NO production in MPMs and no change in RAW264.7. In the in vitro experiments, LPS contamination in polysaccharide might bring a great interference in assessing the activity of drug. Pretreatment with PB (30 µg·mL-1) at 37 °C for 24 h was sufficient to abolish the effects of LPS contamination (10 and 1 000 ng·mL-1).

Simultaneous detection of bacitracin and polymyxin B in livestock products using liquid chromatography with tandem mass spectrometry.

With the overarching aim to develop a simple and reliable method for the quantitative analysis of polypeptide antibiotics in various livestock products, the content of bacitracin, and polymyxin B in pork, beef, chicken, milk, and eggs was analyzed using colistin sulfate as an internal standard. The extracted samples were eluted via solid-phase extraction using 2% formic acid in acetonitrile/methanol (1:1, v/v). The two polypeptides were identified and quantified based on the intensities of mass fragments from the respective triply charged precursor ions (bacitracin: 474.97 amu and polymyxin B: 402 amu) at the defined retention time windows using liquid chromatography with electrospray ionization tandem mass spectrometry in time-scheduled multiple reaction monitoring mode. The calibration curves showed good linearity over the concentration range 50-2500 ng/mL with determination coefficients ≥ 0.991. The mean recoveries were in the range 80.3-88.8% with relative standard deviations <13% for all samples. The limits of quantitation ranged from 30-250 ng/g. The developed method was applied to market samples, but the target analytes were not detected in any of the samples. The developed method is reliable for the simultaneous detection of bacitracin and polymyxin B in pork, beef, chicken, milk, and eggs.

Validation of an UV spectrophotometric assay for the quantification of polymyxin B in solid lipid nanoparticles.

Polymyxins are efficient antibiotic drugs used for the treatment of Gram-negative bacterial infections. These compounds are not absorbed in the gastrointestinal tract and are responsible for serious toxicological effects. In order to enhance their therapeutic effectiveness, decrease the adverse/toxic side effects and promote a sustained release profile, a derivative--polymyxin B sulphate--has been formulated in solid lipid nanoparticles (SLNs) intended for buccal administration. To quantify polymyxin B in the formulation, UV spectrophotometry analysis was applied, validating the analytical methodology by assessing the selectivity, accuracy, precision, linearity, and repeatability. Analyses were performed at 210 nm keeping the samples at 25 degrees C. Results showed that lipid composition of SLNs did not interfere with the polymyxin B spectra. The linearity showed a correlation coefficient of 0.9977 in the range of 5-90 µg/mL. Quantification of polymyxin B by UV spectrophotometry, at 210 nm in SLN formulations, was approved in all analyzed parameters, validating the methodology proposed in this work.

High-throughput hydrophilic interaction chromatography coupled to tandem mass spectrometry for the optimized quantification of the anti-Gram-negatives antibiotic colistin A/B and its pro-drug colistimethate.

Colistin is a last resort's antibacterial treatment in critically ill patients with multi-drug resistant Gram-negative infections. As appropriate colistin exposure is the key for maximizing efficacy while minimizing toxicity, individualized dosing optimization guided by therapeutic drug monitoring is a top clinical priority. Objective of the present work was to develop a rapid and robust HPLC-MS/MS assay for quantification of colistin plasma concentrations. This novel methodology validated according to international standards simultaneously quantifies the microbiologically active compounds colistin A and B, plus the pro-drug colistin methanesulfonate (colistimethate, CMS). 96-well micro-Elution SPE on Oasis Hydrophilic-Lipophilic-Balanced (HLB) followed by direct analysis by Hydrophilic Interaction Liquid Chromatography (HILIC) with Ethylene Bridged Hybrid--BEH--Amide phase column coupled to tandem mass spectrometry allows a high-throughput with no significant matrix effect. The technique is highly sensitive (limit of quantification 0.014 and 0.006 µg/mL for colistin A and B), precise (intra-/inter-assay CV 0.6-8.4%) and accurate (intra-/inter-assay deviation from nominal concentrations -4.4 to +6.3%) over the clinically relevant analytical range 0.05-20 µg/mL. Colistin A and B in plasma and whole blood samples are reliably quantified over 48 h at room temperature and at +4°C (<6% deviation from nominal values) and after three freeze-thaw cycles. Colistimethate acidic hydrolysis (1M H2SO4) to colistin A and B in plasma was completed in vitro after 15 min of sonication while the pro-drug hydrolyzed spontaneously in plasma ex vivo after 4 h at room temperature: this information is of utmost importance for interpretation of analytical results. Quantification is precise and accurate when using serum, citrated or EDTA plasma as biological matrix, while use of heparin plasma is not appropriate. This new analytical technique providing optimized quantification in real-life conditions of the microbiologically active compounds colistin A and B offers a highly efficient tool for routine therapeutic drug monitoring aimed at individualizing drug dosing against life-threatening infections.

Direct determination of polymyxin B sulfate using resonance Rayleigh scattering and resonance non-linear scattering methods with hexatungstate.

At pH 1.3-1.6, tungstate WO4(2-) , can be converted to hexatungstate W6 O19(2-) , which can react with positively charged polymyxin B sulfate (PMB) to result in enhancement of resonance Rayleigh scattering (RRS) and resonance non-linear scattering, including second order scattering and frequency doubling scattering. Linear relationships can be established between enhanced scattering intensity and PMB concentration. The detection limits (3σ) were 5.5 ng/mL (RRS), 10.1 ng/mL (second order scattering) and 34.6 ng/mL (frequency doubling scattering). The optimum reaction conditions, influencing factors and related analytical properties were tested. The interaction mechanism was investigated via absorption spectrum, circular dichroism spectra and atomic force microscopy imaging. The basis of scattering enhancement is discussed. PMB in eardrops, human serum and urine, were quantified satisfactorily by RRS.

A validated ultra-performance liquid chromatography-tandem mass spectrometry method for the quantification of polymyxin B in mouse serum and epithelial lining fluid: application to pharmacokinetic studies.

OBJECTIVES: A rapid, sensitive and robust ultra-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) method was developed for the quantification of four major polymyxin B components (polymyxin B1, polymyxin B2, polymyxin B3 and isoleucine-polymyxin B1) in serum and epithelial lining fluid (ELF) samples. METHODS: A Waters Acquity UPLC HSS C18 column was used with 0.1% formic acid in water/acetonitrile as mobile phases. Analysis was performed in a positive ionization mode with multiple-reactions monitoring scan type. Five percent trichloroacetic acid was used to precipitate proteins in biological samples and to increase the sensitivity of detection. RESULTS: Our results showed a linear concentration range of 0.0065-3.2 mg/L for all the major polymyxin B components in both serum and ELF, respectively; the interday variation was <10% and the accuracy was 88%-115%. The validated method was used to characterize the pharmacokinetics (serum and ELF) of polymyxin B in mice. CONCLUSIONS: This is the first report, to date, examining the individual pharmacokinetics of various polymyxin B components in mice. Our results revealed no considerable differences in clearances among the components. The limited exposure of polymyxin B in ELF observed was consistent with the less favourable efficacy of polymyxin B reported for the treatment of pulmonary infections. This method can be used to further examine the pharmacokinetics of polymyxin B in a variety of clinical and experimental settings.

Development and validation of a reversed-phase high-performance liquid chromatography assay for polymyxin B in human plasma.

OBJECTIVES: The purpose of this study was to develop a specific, sensitive, accurate and reproducible high-performance liquid chromatographic (HPLC) method to measure polymyxin B in human plasma. METHODS: Derivatization of polymyxin B with fluorescent 9-fluorenylmethyl chloroformate (FMOC-Cl) was performed in the same solid-phase extraction C18 cartridge used for the sample pre-treatment. Reversed-phase HPLC was employed with fluorometric detection. The summed peak areas of polymyxin B1 and B2 derivatives were used for quantification. Stability of polymyxin B FMOC derivatives was examined at room temperature for 6 days. Specificity was investigated against seven potentially co-administered antibiotics. Accuracy and reproducibility of the HPLC assay were determined by inter- and intra-day validation. RESULTS: The derivatives of polymyxin B2 and B1 were well resolved and had retention times of 4.75 and 5.55 min, respectively. Good linearity (r(2) > 0.99) was obtained between 0.125 and 4.00 mg/L polymyxin B in human plasma with good accuracy and reproducibility at the limit of quantification (0.125 mg/L). Intra- and inter-day validation demonstrated good accuracy and reproducibility for quality control samples with nominal concentrations of 0.30 and 3.00 mg/L. FMOC derivatives of polymyxin B were stable for at least 3 days at room temperature. None of the possibly co-administered antibiotics tested interfered with the chromatographic analysis of the polymyxin B FMOC derivatives. CONCLUSIONS: A rapid, specific, sensitive, accurate and reproducible HPLC method has been developed and validated to measure polymyxin B in human plasma. The method is suitable for clinical pharmacokinetic studies.

Simultaneous determination of neomycin sulfate and polymyxin B sulfate by capillary electrophoresis with indirect UV detection.

A simple and rapid capillary electrophoresis method, with indirect UV detection, for the simultaneous determination of neomycin sulfate and polymyxin B sulfate in pharmaceutical formulations was developed. Critical parameters such as pH, buffer composition and concentration, voltage and injection time have been studied to evaluate, how they affect responses, such as resolution and migration times. Separation was performed on a fused silica capillary with 50 microm i.d. and 27 cm total length at an applied voltage of 6 kV with a 15 mM phosphate run buffer (pH 5.0) containing 40 mM N-(4-hydroxy-phenyl)acetamide and 50 mM tetradecylammonium bromide (TTAB). The detection wavelength was set at 280 nm. Quantitative analysis was validated by testing the reproducibility of the method, giving a relative standard deviation less than 0.4 and 2.4% for the repeatability of migration time and corrected peak area, respectively. Accuracy was tested by spiking eye-ear formulations with standards and the recoveries of neomycin sulfate and polymyxin B sulfate were found to be between 97.44-103.18% and 96.85-101.68%, respectively. Linearity of neomycin sulfate and polymyxin B sulfate were obtained in the ranges of 17-682 and 24-608 microg/mL, respectively, with r(2) values above 0.999. The established TLC-densitometric method was applied to evaluate the proposed CE method, and comparable results were obtained by using CE with much shorter analysis time and a small quantity of solvents consumed. The developed method is also the first report on the simultaneous determination of neomycin sulfate and polymyxin B sulfate in pharmaceutical preparations by CE.

Ex-vivo evaluation of alginate microparticles for Polymyxin B oral administration.

A crosslinked alginate microparticle system for the targeting to the lymphatic system by Peyer's patches (PP) uptake was designed in order to improve the oral absorption of Polymyxin B (PMB). To verify mucoadhesion and PP uptake, microparticles labelled with fluorescein isothiocyanate (FITC) were prepared by spray-drying technique and crosslinking reactions with calcium ions and chitosan (CS), in vitro characterized and assayed by an ex vivo method. Microparticles showed a size less then 3 microm, an antibiotic loading level of 11.86 +/- 0.70%, w/w, a sustained drug release behaviour in simulated gastro-intestinal (GI) fluids and a preserved biological activity throughout the manufacture. The ex vivo study was performed by a perfusion method on intestinal tracts of just sacrificed adult rats. The recovered samples were analysed by epifluorescence microscope for mucoadhesion and PP uptake and by microbiological analysis for antibiotic activity preservation, providing evidence of mucoadhesion at the level of both PP and non-PP epithelium, uptake by PP and PMB microbiological activity in PP tissue. Furthermore, the study revealed the involvement of transport pathways across villous enterocytes.

Determination of cell mass and polymyxin using multi-wavelength fluorescence.

Multi-wavelength fluorescence was applied for on-line monitoring of cell mass and the antibiotic polymyxin B in Bacillus polymyxa cultivations. By varying the phosphate and nitrogen content of the medium different polymyxin-cell mass ratios could be obtained. Using this strategy, it was possible to investigate if multi-wavelength fluorescence is able to give independent prediction of the two parameters. Partial least square (PLS) regression was applied to establish mathematical relationships between off-line determined cell mass and polymyxin concentrations and on-line collected fluorescence data. For polymyxin one universal PLS model, with a correlation of 0.95 and a root mean square error of cross validation (RMSECV) of 35 mgl(-1), could be constructed. However, correlation between fluorescence and cell mass dry weight could not be established including data from all three types of cultivations. For data from each type of cultivation, separate models with high correlation and low RMSECV values were built. A large variation in cellular composition as a result of the different levels of nitrogen and phosphorus in the cultivations was the probable reason to the necessity of building three models. The results of the present investigation indicate that production of polymyxin is concomitantly regulated by phosphate and nitrogen as the highest polymyxin yield on cell mass, 0.17+/-0.01 gg(-1), was reached in the cultivations where both nitrogen and phosphate concentrations were kept low.

Identification and quantitation of polymyxin B, framycetin, and dexamethasone in an ointment by using thin-layer chromatography with densitometry.

A new thin-layer chromatographic-densitometric method has been developed for rapid identification and quantitative determination of polymyxin B, framycetin, and dexamethasone in a dental ointment. Silica gel 60 and F254 silica gel 60 plates were used for separating antibiotics and dexamethasone acetate, respectively. When determining framycetin and polymyxin B, chromatograms were developed by using 2 mobile phases, namely methanol and methanol-n-butanol-ammonia (25%)-chloroform (14 + 4 + 9 + 12, v/v/v/v/). The densitometric measurements were made at 550 nm after detection with 0.3% ninhydrin solution. Dexamethasone was determined by using the mobile phase cyclohexane-ethyl acetate (2 + 3, v/v) and ultraviolet densitometric recording at 245 nm. The results obtained for individual constituents with the chromatographic-densitometric method demonstrate similar accuracy, relative standard deviation values from 1.49 to 2.47%, and relative error values from 0.02 to 0.81% and are comparable to those obtained with the reference methods.

Temperature dependence of the binding of endotoxins to the polycationic peptides polymyxin B and its nonapeptide.

The interaction between endotoxins-free lipid A and various lipopolysaccharide (LPS) chemotypes with different sugar chain lengths-and the polycationic peptides polymyxin B and polymyxin nonapeptide has been investigated by isothermal titration calorimetry between 20 and 50 degrees C. The results show a strong dependence of the titration curves on the phase state of the endotoxins. In the gel phase (<30 degrees C for LPS and <45 degrees C for lipid A), an endothermic reaction is observed, for which the driving force is an entropically driven endotoxin-polymyxin interaction, due to disruption of the ordered water structure and cation assembly in the lipid A backbone and adjacent molecules. In the liquid crystalline phase (>35 degrees C for LPS and >47 degrees C for lipid A) an exothermic reaction takes place, which is mainly due to the strong electrostatic interaction of the polymyxins with the negative charges of the endotoxins, i.e., the entropic change DeltaS is much lower than in the gel phase. For endotoxins with short sugar chains (lipid A, LPS Re, LPS Rc) the stoichiometry of the polymyxin binding corresponds to pure charge neutralization; for the compounds with longer sugar chains (LPS Ra, LPS S-form) this is no longer valid. This can be related to the lower susceptibility of the corresponding bacterial strains to antibiotics.

Liquid chromatography-mass spectrometry study towards the pH and temperature-induced N-acyl migration in polymyxin B.

In the course of the synthesis and purification of new polymyxins and analogues, formation of a by-product with identical mass was observed and it was believed that this might be the result of acyl migration from the Nalpha- to the Ngamma-position of residue alpha,-gamma-diaminobutyric acid 1 (Dab1) under acidic conditions. Therefore, a LC-MS/MS study was initiated to establish the stability of polymyxin B3 in aqueous solution at room temperature and 60 degrees C, as well as different pH values (i.e. 1.4, 4.4 and 7.4). It was shown that the by-product, which is actually formed in the course of the purification of polymyxin B3 after evaporation in acidic medium, has a retention time similar to Ngamma-polymyxin B3. Acyl-migration occurred most rapidly at 60 degrees C and pH 7.4. Furthermore, it was established that migration of the acyl from the Nalpha- to the Ngamma-position of residue Dab1 is reversible and that the equilibrium seems to be in favor of the Nalpha-acylated compound.