Allograft prosthetic composite reconstruction using a reverse total shoulder arthroplasty for failed oncologic proximal humerus reconstruction.

INTRODUCTION: Endoprosthetic or allograft reconstruction are the preferred reconstruction techniques for proximal humeral bone tumors. Failure of these reconstructions may occur, but historically revision is performed rarely due to the lack of reliable options. Reverse shoulder arthroplasty with an allograft prosthetic composite (rAPC) may provide a revision option. The purpose of the current study was to evaluate our institutional outcome of these procedures. METHODS: Eleven (6 male, 5 female) patients (mean age 51 ± 17 years) underwent revision of a failed oncologic reconstruction of the proximal humerus utilizing a rAPC. The most common indication for revision was subluxation (n = 6) and the most common previous implant was an endoprosthesis (n = 5). RESULTS: Revision resulted in improvements in shoulder elevation (39° vs. 62°, p = 0.02), external rotation (13° vs. 25°, p = 0.04), American Shoulder and Elbow Surgeons score (39 vs. 58, p = 0.004) and Musculoskeletal Tumor Society Scores (51% vs 69%, p = 0.002). There were 2 re-revision procedures performed. One for an allograft fracture and one for allograft resorption and loosening. CONCLUSIONS: Revision with a rAPC can effectively restore patient function. Due to the complexity of the cases, we advocate for these procedures to be performed by subspecialty upper extremity surgeons trained in complex revision shoulder arthroplasty.

Validation of In Vivo Linear and Volumetric Wear Measurement for Reverse Total Shoulder Arthroplasty Using Model-Based Radiostereometric Analysis.

Presently, polyethylene wear measurement of reverse total shoulder arthroplasty (rTSA) is restricted to in vitro, in silico, and retrieval analysis, with no method for the quantification of in vivo wear of well-functioning implants. The purpose of this study was to validate the use of model-based radiostereometric analysis (MBRSA) as a measurement tool for in vivo rTSA wear using a phantom setup. Six additively manufactured polyethylene inserts were fabricated, one unworn control and five to represent known wear patterns, and individually fit within the rTSA components. Each insert was imaged using standard radiostereometric techniques and analyzed using MBRSA. From the position and orientation estimation provided by MBRSA, a micro-computed tomography model of the control insert was virtually placed within the metaphyseal tray. The apparent intersection of the glenosphere into the insert was recorded as wear. This method enables wear measurements with a linear precision of 0.21 mm and a bias of 0.36 ± 0.13 mm, and a volumetric precision of 49.3 mm3 , with a bias of 48.9 ± 24.3 mm3 . This technique allows for the in vivo measurement of polyethylene wear without the requirement of marker beads or baseline radiographs, expanding the potential for in vivo wear measurements to larger populations and retrospective analysis. © 2019 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 37:1620-1627, 2019.

Mid-term results with an anatomic stemless shoulder prosthesis in patients with primary osteoarthritis.

OBJECTIVE: The introduction of a stemless prosthesis in shoulder arthroplasty represents a novel design whereby the proximal humerus is restored anatomically, while leaving the diaphysis of the humerus untouched. The aim of this study was to present the mid-term results of total evolutive shoulder system (TESS; Biomet®), a stemless shoulder prosthesis. METHODS: The study included 38 consecutive patients (18 men and 20 women; mean age: 66 years; range: 55-81 years) treated with shoulder arthroplasty between 2009 and 2011 with TESS for primary glenohumeral arthritis. Total shoulder arthroplasty (TSA) was performed in 28 cases (74%), hemi-shoulder arthroplasty (HSA) in 10 (26%). Constant score, active range of motion, patient satisfaction rate, and radiological assessment were analyzed. Mean time of follow-up was 37 months. RESULTS: Constant score improved from 21.8 points (28.6 adjusted for age) preoperatively to 74.1 points (86.6 adjusted for age) postoperatively. Active range of motion increased significantly from the pre- to postoperative status. Eighty-nine percent were very satisfied or satisfied with shoulder replacement surgery. One cemented glenoid was revised due to aseptic loosening. None of the components were found to be loose at the final follow-up. No signs of stress shielding were seen. CONCLUSIONS: This study shows promising results of this implant concept in the short- to mid-term. These results are comparable with the results achieved with long-established arthroplasty designs. LEVEL OF EVIDENCE: Level IV, Therapeutic Study.

The experience of the RIPO, a shoulder prosthesis registry with 6-year follow-up.

BACKGROUND: Implant registries have proved valuable in assessing the outcomes of arthroplasty procedures. Moreover, by identifying lesser quality implants they have indirectly improved the quality of care. The registry of prosthetic shoulder implants was established in 2008. METHODS: It records information on all types of primary and revision arthroplasty procedures involving the glenohumeral joint, including reverse and total arthroplasty, hemiarthroplasty, resurfacing, removal, and any other surgical procedures that are required to manage these patients. The collected data include patient demographics, weight, height, operated side, cuff status, and diagnosis/reason for revision surgery, information on previous surgical procedures involving either shoulder, comorbidities, antibiotic and thromboembolic prophylaxis, blood transfusions, surgical approach, cuff repair procedures performed during arthroplasty, bone grafts, drains, and perioperative complications, and data about the prosthetic components implanted, including the fixation method. RESULTS: Procedures were performed on 3754 shoulders. They included 2226 RSA, 320 TSA, 730 HA, 233 resurfacing procedures, 245 revisions, and 77 "other" procedures. The survival curves of the implants are greater than 90%, and no differences were found among prosthesis from different manufacturers. The diagnosis that prompted to arthroplasty was: osteoarthritis in 60.9% of cases and fractures, bone necrosis, sequelae of fracture and rotator cuff tear arthropathy for the rest of implants. DISCUSSION AND CONCLUSION: This study describes the epidemiological data and mid-term implant outcomes of the shoulder arthroplasty procedures performed in our region, from 2008 to 2014, and compares them with published data from national registries of similar size. LEVEL OF EVIDENCE: III.

The Dimensions of the Scapula Glenoid in Japanese Rotator Cuff Tear Patients.

BACKGROUND: Reverse total shoulder arthroplasty has become a widely accepted surgical procedure in Japan since the time when the implants were approved for use in 2014. There is a doubt, however, as to whether the implants designed for Western people are suitable for Japanese people, particularly for females of relatively small stature. The purpose of this study was to investigate the glenoid dimension, with special focus on the length after glenoid reaming, in Japanese rotator cuff tear patients. METHODS: Fifty-six shoulders of 55 patients (35 males and 20 females; mean age, 63.8 years) were studied. Using the three-dimensional computed tomography images of the entire scapula before shoulder surgery, we measured the glenoid height and width, and calculated the correlation between these measurements and the patient's height. Further, we measured the anteroposterior length of the scapular neck at the subchondral bone and the length at 15 mm medial to the subchondral bone, to simulate both the glenoid width after reaming (width of the 'virtual reamed surface') and the space available for the end of the center post of a standard glenoid baseplate. RESULTS: The average glenoid height and width were 35.8 mm and 28.1 mm in males and 30.8 mm and 23.4 mm in females, respectively. There was a significant correlation between patient height and glenoid size (glenoid height, r = 0.69; width, r = 0.75; p < 0.01). The mean value of the width of the virtual reamed surface was 27.0 mm in males and 22.5 mm in females. The mean anteroposterior length at 15 mm medial to the subchondral bone was 12.4 mm in males and 9.5 mm in females; the length was shorter than 8 mm in 6 female shoulders. CONCLUSIONS: There was a significant correlation between patient height and glenoid size. Considering that the common diameter of the commercially available baseplates and their center posts is greater than 25 mm and 8 mm, respectively, these prosthetic parts would be too large, especially for the Japanese female glenoid. Given that the current results of Japanese shoulder dimensions are similar to those of Asian people, 'Asian size implants' should be developed.

Total Shoulder Arthroplasty Demographics, Incidence, and Complications-A Nationwide Inpatient Sample Database Study.

INTRODUCTION: Total shoulder arthroplasty (TSA) has become a popular and successful surgery to treat advanced glenohumeral arthritis, rotator cuff arthropathy, and proximal humerus fractures. Historical data is available investigating the epidemiology of total shoulder arthroplasty with regard to patient characteristics, outcomes, and complications; however, there is a lack of studies investigating the most recent and up to date national trends related to shoulder replacement. The purpose of this study was to evaluate changes in the annual incidence, various demographics, and complications of TSA in America. MATERIALS AND METHODS: The Nationwide Inpatient Sample (NIS) was assessed to identify all patients who were admitted for TSA in the United States between 1998 and 2010. National trends in patient demographics, incidence, and length-of-stay (LOS) were analyzed for correlations. The impacts of contributing factors to each outcome were assessed using adjusted multivariable regression analysis. These were used to calculate odds ratios of cohort demographics and their association with complications and LOS. RESULTS: Admissions for TSA have risen (8,041 to 39,072 admissions). The majority of the cohort consisted of Caucasian men between the ages of 64 and 79 years. The incidence rate of complications has remained consistent. Female gender, age > 80 years, and higher Deyo Comorbidity scores were risk factors for higher complications. The LOS has decreased (2.96 to 2.21 days) during the study time period. Female gender, African-American race, Medicaid insurance, and higher Deyo Comorbidity scores were associated with longer stays. DISCUSSION: Our study demonstrates a rapid increase in incidence rates of TSAs within the 13-year period in the United States. An increased risk of complications was noted with older age, female gender, and increased Deyo score. CONCLUSION: Our findings may help health care providers identify ways to better manage this procedure and select patients.

Influence of Glenosphere Design on Outcomes and Complications of Reverse Arthroplasty: A Systematic Review.

BACKGROUND: Different implant designs are utilized in reverse shoulder arthroplasty. The purpose of this systematic review was to evaluate the results of reverse shoulder arthroplasty using a traditional (Grammont) prosthesis and a lateralized prosthesis for the treatment of cuff tear arthropathy and massive irreparable rotator cuff tears. METHODS: A systematic review of the literature was performed via a search of two electronic databases. Two reviewers evaluated the quality of methodology and retrieved data from each included study. In cases where the outcomes data were similar between studies, the data were pooled using frequency-weighted mean values to generate summary outcomes. RESULTS: Thirteen studies met the inclusion and exclusion criteria. Demographics were similar between treatment groups. The frequency-weighted mean active external rotation was 24° in the traditional group and 46° in the lateralized group (p = 0.0001). Scapular notching was noted in 44.9% of patients in the traditional group compared to 5.4% of patients in the lateralized group (p = 0.0001). The rate of clinically significant glenoid loosening was 1.8% in the traditional group and 8.8% in the lateralized group (p = 0.003). CONCLUSIONS: Both the traditional Grammont and the lateralized offset reverse arthroplasty designs can improve pain and function in patients with diagnoses of cuff tear arthropathy and irreparable rotator cuff tear. While a lateralized design can result in increased active external rotation and decreased rates of scapular notching, there may be a higher rate of glenoid baseplate loosening.