Selamento dentinário imediato em restauração semidireta: relato de caso / Immediate dentin sealing in semi-direct restoration: case report

O selamento dentinário imediato é um procedimento essencial na Odontologia, que envolve a aplicação de agentes de selamento na interface entre a dentina e o material restaurador imediatamente após a remoção da cárie e do preparo da cavidade dentária. Este processo busca selar os túbulos dentinários expostos, proporcionando proteção à polpa dentária. O presente caso foi realizado em um paciente do sexo masculino, 56 anos que se queixou de desconforto no elemento dentário 17. Após avaliação clínica e radiográfica, foi constatado uma ampla restauração desadaptada na porção mesio - oclusal do referido dente, sendo que o elemento em questão não possui tratamento endodôntico. Após planejamento e assinatura do TCLE, os seguintes passos foram realizados: remoção da lesão cariosa do dente 17, seguido da realização do levantamento marginal mesial e a realização do selamento dentinário imediato. Moldagem com silicone de adição do dente em questão e do antagonista, assim como registro da mordida. Foi confeccionada uma restauração semidireta em resina composta sob o modelo de gesso obtido. A cimentação da restauração foi feita na consulta seguinte, cumprindo os requisitos fundamentais para restaurar forma, função e estética, resultando na melhoria da qualidade de vida do paciente(AU)

Immediate dentin sealing is an essential procedure in dentistry, involving the application of sealing agents at the interface between dentin and the restorative material immediately after caries removal and cavity preparation. This process aims to seal exposed dentinal tubules, providing protection to the dental pulp. The present case involved a 56-year-old male patient who complained of discomfort in tooth number 17. After clinical and radiographic evaluation, a wide, maladapted restoration in the mesio-occlusal portion of the tooth was identified, with no endodontic treatment in the affected element. Following planning and informed consent, the following steps were taken: removal of the carious lesion from tooth number 17, followed by the execution of mesial marginal elevation and immediate dentin sealing. Silicone addition molding of the affected tooth and antagonist, along with bite registration, was performed. A semi-direct restoration in composite resin was fabricated based on the obtained gypsum model. The restoration was cemented in the subsequent appointment, meeting the essential requirements to restore form, function, and aesthetics, resulting in an improvement in the patient's quality of life(AU)

Restauração em resina composta semidireta em dente posterior: relato de caso / Semi-direct composite restoration in posterior toth: a case report

A escolha da técnica restauradora desempenha papel fundamental na eficácia e duração de um tratamento reabilitador. O objetivo deste relato de caso foi descrever a utilização da técnica semidireta para a confecção de uma restauração em resina composta em um primeiro molar inferior. A paciente apresentava uma restauração insatisfatória no dente 36, que necessitava ser substituída devido à infiltração por cárie. Optou-se pela técnica semidireta devido à amplitude da cavidade, que envolvia estruturas de suporte, e pela combinação das vantagens das abordagens direta e indireta. O procedimento envolveu a remoção de tecido cariado, a aplicação de hidróxido de cálcio pasta, seguida da aplicação de uma fina camada de ionômero de vidro e, posteriormente, resina fluída para realizar o selamento dentinário. O preparo foi realizado seguindo os princípios necessários. O elemento em questão foi moldado com silicone de adição e o arco antagonista, com alginato. Ambos modelos foram vertidos com silicone para modelos semirrígidos e montados em oclusor de peças de brinquedo. A restauração semidireta foi confeccionada em resina composta Filtek Z350 XT, respeitando a anatomia do dente 36. Pigmentos foram utilizados para aprimorar detalhes estéticos. Após acabamento e polimento, a peça foi condicionada e cimentada com cimento dual Relyx Ultimate. Pode-se concluir que a abordagem restauradora por meio da técnica semidireta construída em modelo semirrígido é uma opção terapêutica conservadora e vantajosa para dentes com extensa destruição coronária. Essa técnica possibilita a restauração de forma eficaz, garantindo tanto a estética quanto a função adequada do dente afetado(AU)

The choice of restorative technique plays a fundamental role in the effectiveness and duration of rehabilitation treatment. The objective of this case report was to describe the use of the semi-direct technique to create a composite resin restoration in a lower first molar. The patient had an unsatisfactory restoration on tooth 36, which needed to be replaced due to cavity infiltration. The semi-direct technique was chosen due to the amplitude of the cavity, which involved support structures, and the combination of advantages of the direct and indirect approaches. The procedure involved the removal of carious tissue, and the application of calcium hydroxide paste, followed by the application of a thin layer of glass ionomer and, subsequently, fluid resin to seal the dentin. The preparation was carried out following the necessary principles. The element in question was molded with addition silicone and the antagonist arch was molded with alginate. Both models were poured with silicone for semi-rigid models and mounted on toy parts occluders. The semi-direct restoration was made in Filtek Z350 XT composite resin, respecting the anatomy of tooth 36. Pigments were used to improve aesthetic details. After finishing and polishing, the piece was conditioned and cemented with Relyx Ultimate dual cement. It can be concluded that the restorative approach using the semi-direct technique built on a semi-rigid model is a conservative and advantageous therapeutic option for teeth with extensive coronal destruction. This technique allows for effective restoration, ensuring both the aesthetics and adequate function of the affected tooth(AU)

Evaluation of dentin features in teeth after caries removal by three techniques (chemomechanical, mechanical with a smart bur, and air-abrasion): an in vitro study.

Background: Different methods for removing dental carious lesions exist, including conventional rotary caries removal and new advanced technology like polymer-based burs, chemomechanical agents, air abrasion, and laser. Objectives: This study shows the differences in features of dentin (smear layer, patency of dentinal tubules, surface irregularities, intertubular micro porosities, and exposed dentinal tubules) among different types of caries removal techniques. Materials and Methods: An in vitro study was done on 60 primary molars with occlusal class I active caries. Teeth were divided into three groups according to a method of caries removal (G1: chemomechanical, G2: mechanical with a smart bur, and G3: air-abrasion). After complete caries excavation, the teeth were examined under a scanning electronic microscope (SEM) with the power of magnification 4,000x and 8,000x to show the morphological dentinal features with SEM microphotographs. Data obtained was analyzed using the SPSS program where Fisher exact, Kruskal-Wallis and multiple Wilcoxon sum rank tests were used. The level of significance is when the p-value is less than 0.05. Results: Generally, SEM showed the highest ratio of score 1 of smear layer presence, surface irregularities, and microporosity in all groups in both magnifications. The patency of tubules showed the highest ratio of score 1 in G1, scores 2 in both G2 and G3 in magnification 4,000x, while 8,000x there was the highest ratio of its score 1 in G1 and G2 while the G3 has score 2 as the highest score. The exposed dentinal tubules showed the highest ratio in G1 in score 3, in G2 in score 2, and in G3 in score 1 in magnification 4,000x, while 8,000x there was the highest ratio of its score 2 in both G1 and G3 while the G3 has highest score 1. The study with magnification 4,000x showed a significant difference (S) among three groups in exposed dentinal tubules with a p-value (0.012), and there was S between chemomechanical and smart, chemomechanical and air-abrasions groups with a p-value (0.041, 0.001 subsequentially). Other dentin features showed non-significant differences (NS) among or between groups in both magnifications (4,000x, 8,000x). Conclusions: All groups were effective in removing caries and can successfully treat young, scared or stressed patients. All methods of caries removal produce clinically parametric changes in the residual dentin.

Influence of endodontic access cavity design on mechanical properties of a first mandibular premolar tooth: a finite element analysis study.

OBJECTIVES: This study aimed to investigate the influence of access cavity designs on the mechanical properties of a single-rooted mandibular first premolar tooth under various static loads using a finite element analysis. MATERIALS AND METHODS: 3-dimensional FEA designs were modeled according to the access cavity designs: an intact tooth (control), traditional access cavity (TEC-I), traditional access cavity with Class-II mesio-occlusal cavity design (TEC-II), conservative access cavity (CEC), ninja access cavity (NEC), caries-driven access cavity (Cd-EC), buccal access cavity (BEC) and bucco-occlusal access cavity (BOEC). After the simulated access cavity preparations, root canal treatment was simulated and three different static loads which mimicked oblique and vertical mastication forces were applied to the models. The stress distribution and maximum Von Misses stress values were recorded. The maximum stress values were obtained on both enamel and dentin under multi-point vertical loads. RESULTS: The maximum stress values were obtained on both enamel and dentin under multi-point vertical loads. Under all load types, the minimum stress distribution was observed in the control group, followed by CEC, NEC and BEC designs. The highest stress concentration was detected in Cd-EC and TEC-II designs. Under single-point vertical loading, the stress was mostly concentrated in the lingual PCD area, while under multi-point vertical loading, the entire root surface was stress-loaded except for the lingual apical third of the root. CONCLUSION: Preserving tooth tissue by simulating CEC, NEC and BEC access cavities increased the load capacity of a single-rooted mandibular first premolar following simulated endodontic treatment.

Marginal integrity of prototype bioactive glass-doped resin composites in class II cavities.

OBJECTIVES: This in vitro study examined the marginal integrity of experimental composite materials doped with bioactive glass (BG). MATERIALS AND METHODS: Class-II MOD cavities were prepared and restored with one of the following composite materials: a commercial composite material as a reference (Filtek Supreme XTE), an experimental composite doped with BG 45S5 (C-20), and an experimental composite doped with a fluoride-containing BG (F-20). Six experimental groups (n = 8) were used, as each of the three composites was applied with (+) or without (-) a universal adhesive (Adper Scotchbond Multipurpose). All specimens were subjected to thermocycling (10,000 x, 5-55 °C) and then additionally stored in artificial saliva for eight weeks. Scanning electron micrographs of the mesial and the distal box were taken at three time points (initial, after thermocycling, and after eight weeks of storage in artificial saliva). The margins were classified as "continuous" and "non-continuous" and the percentage of continuous margins (PCM) was statistically analyzed (α = 0.05). RESULTS: In most experimental groups, thermocycling led to a significant decrease in PCM, while the additional 8-week aging had no significant effect. F-20 + performed significantly better (p = 0.005) after 8 weeks storage in artificial saliva than the reference material with adhesive, while no statistically significant differences were observed at the other two time points. C-20 + exhibited significantly better PCM than the reference material with adhesive after thermocycling (p = 0.026) and after 8 weeks (p = 0.003). CONCLUSIONS: Overall, the experimental composites with BG showed at least as good marginal adaptation as the commercial reference, with an indication of possible re-sealing of marginal gaps. CLINICAL RELEVANCE: Maintaining or improving the marginal integrity of composite restorations is important to prevent microleakage and its likely consequences such as pulp irritation and secondary caries.

Complete versus incomplete caries removal procedures and their effects on dental pulp in primary teeth - An in vivo study.

INTRODUCTION: Dental caries results from an ecologic shift within the dental biofilm from a balanced population of microorganisms to an acidogenic, aciduric, and cariogenic microbiological population developed and maintained by frequent consumption of fermentable dietary carbohydrates. Total caries removal (TCR) of deep lesion may result in pulpal exposure requiring more invasive treatment. Hence, current pediatric dentistry has shifted to minimally invasive treatment that avoids more complex, time-consuming procedure, and the child's discomfort. AIM: The aim of this study is to evaluate and compare clinical performance and radiographic changes after complete and incomplete caries removal procedures. MATERIALS AND METHODS: The study was conducted on 60 primary molars in children aged 6-9 years. Selected 60 primary molars were randomly divided into two groups. Group 1 (PCR): infected dentin was removed, while the affected dentin was maintained on the pulpal wall. Group 2 (TCR): both infected and affected dentin were removed through low-speed carbide bur and hand excavator. Teeth were evaluated at 4 and 6 months clinically and radiographically. RESULTS: The proportion was compared using Fisher's exact test. The Statistical Package for the Social Sciences version 21 was used for analysis. The level of significance was kept at 5%. CONCLUSION: The clinical and radiographic success rates of ICR and CCR in primary teeth with deep carious lesions were high and did not differ significantly, indicating that the retention of carious dentin does not interfere with pulp vitality. Thus, ICR is a reliable minimally invasive approach that might replace the CCR in primary teeth when correctly indicated.

The Selective Enamel Etch Technique.

Adhesive dentistry is an essential component in the delivery of direct and indirect restorations. Ongoing discussions among scientists and clinicians have focused on whether or not current self-etch and universal adhesives adequately prepare enamel surfaces to achieve optimal bond strengths. To address these concerns, a selective enamel etch technique has been recommended. The definition of a selective enamel etch technique is as its name suggests. The clinician selectively etches the enamel of a cavity preparation by applying phosphoric acid etchant to the enamel surfaces of the preparation while refraining from applying the etchant to the dentin. This article explores the current research to help guide clinicians to achieve ideal outcomes when using dental adhesives. With few exceptions, the current scientific evidence recommends a selective enamel etch technique in conjunction with the clinician's adhesive system of choice.

Clinical guidelines for posterior semidirect composite resin restorations: a case report with a 17-month follow-up.

Patients are always looking for conservative, esthetic, and long-lasting dental restorations, and the technique used directly influences the longevity of the treatment. The location of the restoration in the mouth and the extent of the decay influence the treatment choice. The larger the dimensions of the cavity preparation, the greater the difficulties in restoring the tooth using direct techniques. The semidirect technique, when indicated, can achieve satisfactory results. It is a relatively easy procedure, consisting of tooth preparation to receive an indirect restoration, fabrication of an alginate impression, fabrication of the composite resin restoration on a flexible cast, cementation, removal of excess cement, and occlusal adjustment. The aim of this case report is to present a viable alternative to direct and indirect restorations for posterior teeth with extensive decay. The article describes the extraoral semidirect technique for fabricating a composite resin restoration, highlighting its indications and discussing advantages and disadvantages.

The effect of different deep margin elevation methods on the fracture strength of CAD-CAM restorations.

PURPOSE: To evaluate the effect of two resin composites (with different viscosities) and the elevation amount on fracture strength and fracture behavior of molars with and without deep margin elevations (DME). METHODS: 70 extracted, caries-free human molars were selected. All teeth were prepared as MOD onlay cavities with a margin 2 mm below the cemento-enamel junction (CEJ) on the mesial and buccal sides and 2 mm above the CEJ on the distal side. The teeth were divided into two groups according to the type of resin composite used in margin elevation, elevated with flowable composite (Universal Flo) or condensable composite (G-Aenial Posterior). These two groups were further subdivided into subgroups in which the elevation was 2, 3, or 4 mm, and a control group in which the non-elevated indirect restoration was directly bonded to the subgingival margin, making a total of seven groups (n= 10). After elevations, the restorations were completed using a nanoceramic CAD-CAM block (Cerasmart A3 HT) and as adhesive cement, G-Cem Link Force. Static force was applied to the restored teeth using a universal testing machine at an angle of 15° until fracture occurred. Fracture strength values were recorded, and fracture types were examined under 6x magnification. One-way ANOVA was carried out to determine the effect of DME on the fracture strength. A two-way ANOVA was conducted to investigate main and interaction effects of the material type used in the elevation and the amount of elevation made on the fracture strength (P< 0.05). RESULTS: Using flowable or condensable composite as elevation material did not affect the fracture strength of CAD-CAM restorations. Flowable and condensable composites of 2, 3, or 4 mm did not significantly affect fracture strength values for either material. Specimen margins with and without elevation exhibited similar fracture strength values. The type of material used in the elevation and the amount did not affect the fracture strength of teeth. CLINICAL SIGNIFICANCE: The deep margin elevation technique for teeth with carious lesions extending subgingivally, may be useful in routine practice.

Assessments of polymerization shrinkage by optical coherence tomography-based digital image correlation analysis-Part I: Parameter identification.

OBJECTIVE: To investigate the feasibility of optical coherence tomography (OCT)-based digital image correlation (DIC) analysis and to identify the experimental parameters for measurements of polymerization shrinkage. METHODS: Class I cavities were prepared on bovine incisors and filled with Filtek Z350XT Flowable (Z350F). One OCT image of the polymerized restoration was processed to generate virtually displaced images. In addition, the tooth specimen was physically moved under OCT scanning. A DIC software analyzed these virtual and physical transformation sets and assessed the effects of subset sizes on accuracy. The refractive index of unpolymerized and polymerized Z350F was measured via OCT images. Finally, different particles (70-80 µm glass beads, 150-212 µm glass beads, and 75-150 µm zirconia powder) were added to Z350F to inspect the analyzing quality. RESULTS: The analyses revealed a high correlation (>99.99%) for virtual movements within 131 pixels (639 µm) and low errors (<5.21%) within a 10-µm physical movement. A subset size of 51 × 51 pixels demonstrated the convergence of correlation coefficients and calculation time. The refractive index of Z350F did not change significantly after polymerization. Adding glass beads or zirconia particles caused light reflection or shielding in OCT images, whereas blank Z350F produced the best DIC analysis results. SIGNIFICANCE: The OCT-based DIC analysis with the experimental conditions is feasible in measuring polymerization shrinkage of RBC restorations. The subset size in the DIC analysis should be identified to optimize the analysis conditions and results. Uses of hyper- or hypo-reflective particles is not recommended in this method.

Deep margin elevation in restorative dentistry: A scoping review.

OBJECTIVES: Deep margin elevation (DME) is a restorative approach offering the possibility of performing stepwise elevation of deep proximal cavities to create more favourable margins for direct or indirect restorations. The objectives of this scoping review were to explore what is known or unknown about DME by describing a wide ranging evidence base including peer reviewed literature and non-traditionally published information on the web. DATA: Data were extracted from the included evidence in order to describe the following: the extent and nature of the evidence base; the situations which are appropriate for DME; the materials and techniques which are used; the outcomes which have been measured in empirical studies; the risks which have been reported; and the findings which have been reported in studies which compared DME to surgical crown lengthening. SOURCES: This scoping review included a wide range of published evidence and extensive web searching for grey literature, including CPD, training and multimedia information. STUDY SELECTION: The findings revealed a range of published literature as well as freely available, online information advising practitioners about DME. Most empirical evidence was based on in vitro studies, and there were few clinical studies comparing DME to crown lengthening. Online information included recent, multimedia sources. CONCLUSIONS: DME is a technique that can be used with motivated patients with good oral hygiene if rubber dam isolation is achieved, if there is no invasion of the connective tissue space, and if a strict restorative protocol is adhered to. CLINICAL SIGNIFICANCE: With phasing out of amalgam and adhesive dentistry increasing in popularity, DME addresses multiple clinical problems associated with sub-gingival margins prior to restoration.

In-vitro evaluation of fracture resistance of teeth restored with different high-viscosity glass ionomer restorative materials and bulk-fill composite resins.

OBJECTIVES: This study aimed to evaluate the effect of restorations made with a glass-hybrid restorative system (GHRS), a high-viscosity glass ionomer restorative material (HVGIC), a high-viscosity bulk-fill composite resin (HVB), a flowable bulk-fill composite resin (FB), and a nanohybrid composite resin (NH), which are commonly preferred in clinical applications on the fracture resistance of teeth in-vitro. MATERIALS AND METHODS: One hundred intact human premolar teeth were included in the study. The teeth were randomly divided into ten groups (n = 10). No treatment was applied to the teeth in Control group. Class II cavities were prepared on the mesial surfaces of the remaining ninety teeth in other groups. For restoration of the teeth, a GHRS, a HVGIC, a HVB, a FB, and a NH were used. Additionally, in four groups, teeth were restored using NH, GHRS, and HVGIC with open and closed-sandwich techniques. After 24 h, fracture resistance testing was performed. One-way ANOVA and Tukey HDS tests were used for statistical analysis of the data. RESULTS: The fracture resistance values of Control group were statistically significantly higher than those of GHRS, HVGIC, FB, NH, HVGIC-CS, GHRS-OS, and HVGIC-OS groups(p < 0.05). There was no statistically significant difference observed between the fracture resistance values of Control, HVB, and GHRS-CS groups (p > 0.05). CONCLUSION: It can be concluded that the use of HVB and the application of GHRS with a closed-sandwich technique may have a positive effect on the fracture resistance of teeth in the restoration of wide Class II cavities. CLINICAL RELEVANCE: The use of high-viscosity bulk-fill composite resin and the application of glass-hybrid restorative system with the closed-sandwich technique in the restoration of teeth with wide Class II cavities could increase the fracture resistance of the teeth.

Effect of fiber-reinforced direct restorative materials on the fracture resistance of endodontically treated mandibular molars restored with a conservative endodontic cavity design.

OBJECTIVE: This study aimed to evaluate the fracture strength of teeth restored using fiber-reinforced direct restorative materials after endodontic treatment with a conservative mesio-occlusal access cavity design. MATERIALS AND METHODS: A total of 100 extracted intact mandibular first molars were selected and distributed into a positive control group where teeth left intact and the following four test groups comprised of teeth with conservative mesio-occlusal access cavities that had undergone root canal treatment (n = 20/group): access cavity without restoration (negative control), bulk-fill resin composite with horizontal glass fiber post reinforcement, fiber-reinforced composite with bulk-fill resin and bulk-fill resin composite. Following thermocycling (10,000 cycles), fracture resistance was measured using a universal testing machine. Statistical analyses (one-way analysis of variance and the Tamhane test) were performed, and statistical significance was set at p < 0.05. RESULTS: Groups with minimally invasive access cavities had lower fracture strength than intact teeth, regardless of the restoration material (p < 0.05). Fiber-reinforced composite groups demonstrated higher fracture strength than bulk-fill resin composite alone (p < 0.05). Fracture types varied among groups, with restorable fractures predominant in the fiber-reinforced composite groups. CONCLUSION: This study suggests that using fiber-reinforced composite materials, especially in combination with bulk-fill resin composites, can effectively enhance the fracture strength of endodontically treated teeth with conservative access cavities. However, using only bulk-fill resin composite is not recommended based on the fracture strength results. CLINICAL SIGNIFICANCE: When teeth that undergo endodontic treatment are restored using a conservative access cavity design and fiber-reinforced composite materials, especially in combination with bulk-fill resin composites, the fracture strength of the teeth can be effectively increased.

Restorations performance after selective caries removal to soft dentine: 18-month follow-up of a controlled clinical trial.

OBJECTIVE: This randomized controlled clinical trial aimed to evaluate the clinical performance of composite resin restorations placed after selective caries removal to soft dentin (SCRSD) or stepwise excavation (SW) over an 18-month period. METHODS: Inclusion criteria were patients with permanent molars and/or premolars presenting deep caries lesions (≥50 % of the dentin thickness). Teeth were submitted to SCRSD (n = 76) or SW (n = 76). Evaluations were performed based on FDI (World Dental Federation) criterion. Survival analysis was performed to estimate the survival of restorations and its association with clinical variables and socio-demographic characteristics (adjusted Weibull regression model). The study was registered on Registro Brasileiro de Ensaios Clínicos (ReBEC 65ntbc). RESULTS: The follow-up period ranged from 6 to 18 months (mean ± SD 16.3 ± 3.4 months). Patients' ages ranged from 9 to 55 years (mean ± SD 29 ± 10.5 years). A total of 135 teeth (SCRSD = 72; SW = 63) from 101 patients were evaluated. There were 4 failures in the SCRSD group (2 loss of restoration in need of replacement and 2 marginal fractures in need of repair) and 2 in the SW group (fracture in need of repair). The association between explanatory variables and restoration failure showed similar success rates for SW (99.4 %) and SCRSD (97.9 %) (p = 0.16). Patients presenting gingivitis (≥20 % of sites with gingival bleeding) had 8.50 times more risk for failure than those with <20 % of bleeding sites (p = 0.03). CONCLUSION: This study showed that placing a composite resin restoration over soft dentin (after SCRSD) did not affect its clinical performance after 18 months. CLINICAL SIGNIFICANCE: SCRSD is a feasible treatment option for the management of deep caries lesions in permanent teeth as it preserves tooth vitality and tooth structure without compromising restoration longevity.

Assessments of polymerization shrinkage by optical coherence tomography-based digital image correlation analysis-Part II: Effects of restorative composites.

OBJECTIVES: To examine the polymerization shrinkage of different resin-based composite (RBC) restorations using optical coherence tomography (OCT) image-based digital image correlation (DIC) analysis. METHODS: The refractive index (RI) of three RBCs, Filtek Z350XT (Z350), Z350Flowable (Z350F), and BulkFill Posterior (Bulkfill), was measured before and after polymerization to calibrate their axial dimensions under OCT. Class I cavities were prepared in bovine incisors and individually filled with these RBCs under nonbonded and bonded conditions. A series of OCT images of these restorations were captured during 20-s light polymerization and then input into DIC software to analyze their shrinkage behaviors. The interfacial adaptation was also examined using these OCT images. RESULTS: The RI of the three composites ranged from 1.52 to 1.53, and photopolymerization caused neglectable increases in the RI values. For nonbonded restorations, Z350F showed maximal vertical displacements on the top surfaces (-16.75 µm), followed by Bulkfill (-8.81 µm) and Z350 (-5.97 µm). In their bonded conditions, all showed increased displacements. High variations were observed in displacement measurements on the bottom surfaces. In the temporal analysis, the shrinkage of nonbonded Z350F and Bulkfill decelerated after 6-10 s. However, Z350 showed a rebounding upward displacement after 8.2 s. Significant interfacial gaps were found in nonbonded Z350 and Z350F restorations. SIGNIFICANCE: The novel OCT image-based DIC analysis provided a comprehensive examination of the shrinkage behaviors and debonding of the composite restorations throughout the polymerization process. The flowable composite showed the highest shrinkage displacements. Changes in the shrinkage direction may occur in nonbonded conventional composite restorations.

Assessment of the efficiency of dental excavation methods using laser speckle imaging.

This paper introduces a novel application of the laser speckle technique in dentistry, focusing on assessing the efficiency of dental excavation methods used to remove decayed tooth structure. The aim is to evaluate the efficiency of two chemo-mechanical agents and the high-speed drill using the laser speckle technique, which offers objective, non-invasive, and real-time evaluation capabilities. Extracted human primary molars with active occlusal carious lesions were sectioned into three parts, with each part allocated to one of three groups: Group 1 (Brix3000®), Group 2 (Papacarie DUO®), and Group 3 (High-speed drill mechanical caries removal). Caries removal was performed using the designated agent or method for each group. After caries excavation, speckle imaging using a 632.8 nm laser was conducted. Additionally, SEM was used to acquire micro-photographs of the surface morphology of the treated samples. The findings reveal insights into the comparative efficiency of the three dental excavation agents and methods using the laser speckle technique. The speckle parameters extracted from speckle patterns generated by treated teeth provide valuable information for evaluating the performance of the excavation methods. The scanning electron microscopy images also offer detailed visual evidence to support the analysis. This paper demonstrates the potential of the laser speckle technique for assessing the efficiency of dental excavation methods. The objective, non-invasive, and real-time evaluation provided offers advantages over subjective visual assessment and manual measurements.

Impact of self-assessment on dental student's performance in pre-clinical conservative dentistry course.

BACKGROUND: Self-assessment (SA) is an interactive course that endorses the accomplishment of learning objectives through learners' identification of insufficiencies in their didactic knowledge and pre-clinical skills. This study was planned to determine whether there is any improvement in the faculty assessment (FA) score following the implementation of SA in the Pre-clinical Conservative Dentistry Course. METHODS: Fifty-four first-semester dental students were given an introductory lecture followed by a demonstration for Class I Cavity Preparation in typhodont mandibular first molar. At the end of the demonstration, the Scoring Rubric (SR) was explained point-wise in the prepared cavities. During the next session, all students performed Class I cavity preparation and they were given an assessment sheet to enter their scores (SA1). All teeth were evaluated by the Grading Faculties in a blinded manner (FA1). Each participant was explained the difference in their respective SA1 from FA1 and their queries were resolved individually. During the next sessions, Students and Grading Faculties followed the same protocol and scores were recorded as SA2, FA2, SA3 and FA3. RESULTS: The mean score of SA1 was significantly higher than that of FA1 (p < 0.001). However, no significant difference was obtained between SA and FA in the second (p = 0.352) and third (p = 0.434) assessments. In contrast with first assessment, mean marks obtained in FA were higher compared to SA in both second and third assessments. There was a statistically significant improvement in mean marks obtained by the students over time (p < 0.001). CONCLUSION: SA endorsed student-faculty communication and enhanced student's poise and technical skills in operative pre-clinical dentistry.

Microhardness and elemental analysis of ion-releasing restoration/ dentin interface following enzymatic chemomechanical caries excavation.

BACKGROUND: This study was conducted to compare chemical, elemental and surface properties of sound and carious dentin after application of two restorative materials resin-modified glassionomer claimed to be bioactive and glass hybrid restorative material after enzymatic chemomechanical caries removal (CMCR) agent. METHODS: Forty carious and twenty non-carious human permanent molars were used. Molars were randomly distributed into three main groups: Group 1 (negative control) - sound molars, Group 2 (positive control) - molars were left without caries removal and Group 3 (Test Group) caries excavated with enzymatic based CMCR agent. After caries excavation and restoration application, all specimens were prepared Vickers microhardness test (VHN), for elemental analysis using Energy Dispersive Xray (EDX) mapping and finally chemical analysis using Micro-Raman microscopy. RESULTS: Vickers microhardness values of dentin with the claimed bioactive GIC specimens was statistically higher than with glass hybrid GIC specimens. EDX analysis at the junction estimated: Calcium and Phosphorus of the glass hybrid GIC showed insignificantly higher mean valued than that of the bioactive GIC. Silica and Aluminum mean values at the junction were significantly higher with bioactive GIC specimens than glass hybrid GIC specimen. Micro-raman spectroscopy revealed that bioactive GIC specimens showed higher frequencies of v 1 PO 4, which indicated high level of remineralization. CONCLUSIONS: It was concluded that ion-releasing bioactive resin-based restorative material had increased the microhardness and remineralization rate of carries affected and sound dentin. In addition, enzymatic caries excavation with papain-based CMCR agent has no adverse effect on dentin substrate.

Evaluation of Papacarie®, Carie-Care™, BRIX3000™ and conventional hand instrumentation for caries removal in primary teeth: a randomized control study.

In the current odontological era, carious lesions are removed while tooth tissue is preserved. Most of these ideals are met by chemomechanical caries removal (CMCR) methods, which are easy and comfortable to use, differentiate and eliminate infected tissues, minimize pressure, vibration and heat, and are cost-effective. This study examines the efficacy of commercially available CMCR agents, namely Papacarie®, Carie-Care™ and BRIX3000™, and a conventional hand instrumentation method for caries removal in deciduous molars in terms of time consumption, ease of application, and pain perception. For this randomized clinical trial, 120 children aged 4 to 9 years were selected and randomly allocated to four groups of 30 patients each. Time consumption, ease of application, and pain perception were evaluated at three intervals: pre-, during- and post-caries removal, using Wong-Baker FACES (WBF) Pain Rating Scale and the Face, Legs, Activity, Cry, Consolability (FLACC) scale. The results showed that among the compared materials and conventional hand instrumentation technique, Carie-Care™ was statistically found to be the least time-consuming with a p-value of 0.019, have the least pain perception with a p-value of 0.02, and was clinically the best with respect to manipulation and handling. While all three CMCR agents aid in the removal of carious tissue, Carie-Care™ was the most effective based on time consumption, pain perception and simplicity of administration.

Simulated Hydrostatic Pulpal Pressure Effect on Microleakage-An Initial Study.

PURPOSE: This study's purpose was to evaluate the effect of simulated in vitro hydrostatic pulpal pressure (HPP) on microleakage. METHODS AND MATERIALS: Extracted third molars (n=12) were sectioned 5 mm below the cementoenamel junction, pulp tissue removed, and the sectioned crowns mounted on a Plexiglas plate penetrated by an 18-gauge stainless steel tube. The mounted specimen mesial surface received a 2×4×6 mm Class V preparation followed by restoration with a strongly acidic, one-step dental adhesive and a flowable microfilled resin, following all manufacturers' instructions. Restorations were finished to contour, and tubing was attached to a 20-cm elevated, 0.2% rhodamine G reservoir to the specimen steel tube for 48 hours. Specimens then received a nail polish coating to within 1 mm of the restoration margins and were placed in 2% methylene blue (MB) dye for 24 hours, followed by rinsing, embedding in epoxy resin, and sectioning into 1 mm slices using a diamond saw. Controls were intact molars (n=12) processed as above but without HPP. Specimen slices were evaluated using laser confocal microscopy with images exported to ImageJ software with microleakage assessed as the MB linear penetration as a percentage of the total interfacial wall length. Mean values were evaluated with the Kruskal Wallis/Dunn test at a 95% confidence level. RESULTS: The control specimens demonstrated significantly greater (p<0.0001) MB penetration than experimental specimens with simulated HPP. Under this study's conditions, simulated HPP significantly decreased MB dye penetration. CONCLUSION: Studies accomplished without simulated HPP may overestimate microleakage results.