[Application of autogenous block bone graft in the reconstruction of severe alveolar crest defect].

Patients with severe alveolar ridge defects cannot be directly implanted and repaired, which seriously affects their quality of life. Onlay bone grafting is the main solution for severe alveolar ridge bone defect reconstruction, among which autogenous block bone grafting is the most widely used and is also the focus of clinical research on bone tissue reconstruction. This article expounds the characteristics and basic principles of autogenous bone block grafting, and comprehensively analyzes the selection of autogenous bone donor site, the principles of surgical operation, and the progress of bone graft techniques. In order to help surgeons make correct clinical decisions, increase the predictability of surgical effects, and improve the level of clinical diagnosis and treatment.

Evaluation of platelet-rich fibrin versus collagen membrane for enhancing healing of secondary grafted alveolar cleft: a randomised controlled trial.

The purpose of this study was to compare the efficiency of using autologous platelet-rich fibrin versus a resorbable collagen membrane in secondary alveolar bone grafting. Patients were randomly allocated to the three treatment groups: Group 1 - twelve children in whom the nasal layers of the alveolar clefts were repaired using autologous platelet-rich fibrin with autogenous chin bone; Group 2 - twelve children in whom the nasal layers of the alveolar clefts were repaired using bovine collagen membrane type I (Colla-D) with autogenous chin bone; and Group 3 - twelve children in whom the bony alveolar clefts were grafted with autogenous chin bone after construction of a watertight nasal floor had been completed. The study population comprised 36 patients with alveolar clefts, ranging in age from seven to 12 years. At the last follow-up period all groups had stable healing conditions and good radiological outcomes in terms of the alveolar bone height bordering the teeth (both mesially and distally) and the incorporation of grafting material with the surrounding bone. The use of either a PRF membrane and a collagen membrane as an interpositional layer between the nasal layer and the autogenous chin bone graft enhanced bone formation and density in alveolar clefts compared with the control group.

An Innovative Technique of Presurgical Lip, Alveolus, and Nose Approximation (PLANA) for Infants with Clefts.

The innovative technique of "presurgical lip, alveolus, and nose approximation" (PLANA) offers a new approach within the domain of presurgical infant orthopedics for infants born with cleft lip and palate. Presurgical lip, alveolus, and nose approximation introduces the utilization of the NoseAlign device in conjunction with medical adhesive tapes, designed to approximate and support displaced soft tissue nasolabial structures in patients with cleft, without an intraoral plate. The NoseAlign device, constructed from medical-grade silicone, consists of 2 tubular portions that fit into the nostrils, connected by a columella band. Notably, it also features a wave-shaped and curved horizontal lip band, resting on the upper lip, with elastic clasps for secure attachment to the face with medical adhesive tapes. Presurgical lip, alveolus, and nose approximation therapy employs the NoseAlign device to support the collapsed nasal alar rim and cartilage, the displaced columella, the deviated nasal septum, and the displaced nasal alar base. This innovative approach minimizes the need for frequent office visits, making it particularly suitable for patients residing at a distance from specialized cleft centers. The prefabricated NoseAlign device offers effective support to nasal structures, making it suitable for unilateral and bilateral clefts. Importantly, the absence of an intraoral plate ensures it does not interfere with feeding. Presurgical lip, alveolus, and nose approximation therapy, initiated as early as 1 to 2 weeks, leverages the plasticity of nasal soft tissue and cartilage to achieve the desired nasal form before primary surgery. Although presurgical lip, alveolus, and nose approximation therapy does have some limitations, particularly in cases of medially collapsed alveolar segments, its simplicity, universal applicability, and patient-friendliness make it a promising technique in the presurgical infant orthopedics field.

Alveolar morphometry in young adults with and without agenesis of the upper lateral incisor: A retrospective study.

INTRODUCTION: We aimed to compare alveolar morphometry in young adults with agenesis of the upper lateral incisor versus the side without agenesis and versus matched controls. MATERIAL AND METHODS: In this observational retrospective study, cone beam computed tomography scans were obtained of 36 upper hemiarches from young adults aged 15 to 30 years. The hemiarches were distributed into three groups: group 1: 12 upper hemiarches presenting agenesis of the upper lateral incisor; group 2: 12 upper hemiarches from the opposite side without agenesis of the upper lateral incisor (control group 1); and group 3: 12 upper hemiarches without agenesis of the upper lateral incisor matched for age and sex with respect to the affected group (control group 2). A trained and calibrated investigator performed all the alveolar measurements at two different times, including sagittal, coronal and axial slices of each hemiarch. Paired Student's t-tests, Chi-square and repeated measures ANOVA with Bonferroni correction were used, (P<0.05). RESULTS: Apical mesial evaluation of group 1 (4.22±1.19mm) was significantly lower (P<0.001) than that of groups 2 (6.72±1.17mm) and 3 (7.58±1.67mm). Apical distal evaluation also showed differences (P<0.001) among the three groups, with the dimension being smaller in group 1 with agenesis (4.53±1.14mm), followed by group 2 without agenesis (6.23±1.55mm) and the healthy control group 3 (7.73±1.71mm). CONCLUSIONS: Lateral incisor agenesis significantly reduces the alveolar dimensions of the affected area. In cases of unilateral agenesis, the unaffected side also shows sequelae, with decreased dimensions compared to cases without agenesis. This condition should be taken into account when making therapeutic decisions regarding rehabilitation with implants or canine replacement.

Does Early Referral Lead to Early Repair? Quality Improvement in Cleft Care.

BACKGROUND: Cleft lip and palate is the most common congenital defect of the head and neck, occurring in 1 of 700 live births. Diagnosis often occurs in utero by conventional or 3-dimensional ultrasound. Early cleft lip repair (ECLR) (<3 months of life) for unilateral cleft lip (UCL), regardless of cleft width, has been the mainstay of lip reconstruction at Children's Hospital Los Angeles since 2015. Historically, traditional lip repair (TLR) was performed at 3 to 6 months of life ± preoperative nasoalveolar molding (NAM). Previous publications highlight the benefits of ECLR, such as enhanced aesthetic outcomes, decreased revision rate, better weight gain, increased alveolar cleft approximation, cost savings of NAM, and improved parent satisfaction. Occasionally, parents are referred for prenatal consultations to discuss ECLR. This study evaluates timing of cleft diagnosis, preoperative surgical consultation, and referral patterns to validate whether prenatal diagnosis and prenatal consultation lead to ECLR. METHODS: Retrospective review evaluated patients who underwent ECLR versus TLR ± NAM from 2009 to 2020. Timing of repair, cleft diagnosis, and surgical consultation, as well as referral patterns, were abstracted. Inclusion criteria dictated: age < 3 months for ECLR or 3 to 6 months for TLR, no major comorbidities, and diagnosis of UCL without palatal involvement. Patients with bilateral cleft lip or craniofacial syndromes were excluded. RESULTS: Of 107 patients, 51 (47.7%) underwent ECLR whereas 56 underwent TLR (52.3%). Average age at surgery was 31.8 days of life for the ECLR cohort and 112 days of life for the TLR cohort. Furthermore, 70.1% of patients were diagnosed prenatally, yet only 5.6% of families had prenatal consults for lip repair, 100% of which underwent ECLR. Most patients were referred by pediatricians (72.9%). Significance was identified between incidence of prenatal consults and ECLR (P = 0.008). In addition, prenatal diagnosis was significantly correlated with incidence of ECLR (P = 0.027). CONCLUSIONS: Our data demonstrate significance between prenatal diagnosis of UCL and prenatal surgical consultation with incidence of ECLR. Accordingly, we advocate for education to referring providers about ECLR and the potential for prenatal surgical consultation in the hopes that families may enjoy the myriad benefits of ECLR.

Collagen membrane and distraction osteogenesis for correcting alveolar bone defects: An animal pilot study.

BACKGROUND: The objective of this study was to evaluate the applicability of distraction osteogenesis with or without collagen membrane coverage to approximate the bone surfaces surrounding alveolar defects in pigs. METHODS: The sample comprised six pigs. One animal was control, and in the other five, alveolar bone defects were created and distraction osteogenesis was carried out to approximate adjacent bone surfaces in the defect site. Resorbable membranes were placed to cover the alveolar defects on one palatal side of the experimental animals. Radiographs were taken, and the histology was studied in each bone defect site at the 2nd, 9th, 16th, 23rd, and 46th days of healing. RESULTS: The radiographs showed that the alveolar bone defects were successfully corrected. Initial osteogenesis was delayed, but bone bridge formation was complete in the membrane-covered samples at the 46th day of healing. In the other group, bone bridge formation was incomplete at the end of the study. CONCLUSIONS: Distraction osteogenesis was effective in approximating transported bones to host bones. The resorbable membranes produced complete bone bridges in the approximation sites.

ORAL HYGIENE STATE IN CHILDREN WITH CONGENITAL DEFECTS OF THE ALVEOLAR PROCESS ON THE MAXILLA.

Bone plasty of congenital and residual defects of the alveolar process of the upper jaw is a technically difficult surgical intervention which is necessary for full rehabilitation of a patient with congenital lip and palate clefts. This operation creates conditions for stabilization of maxilla fragments and normalization of the upper jaw development and also for successful teeth eruption. The aim of the study - to assess the state of oral hygiene before surgery in children with congenital residual defect of the alveolar process we used Fedorov-Volodkina Hygiene Index and index of the intensity of gingivitis (РМА) according to Masser-Parma. The study was performed on three clinical subgroups of patients (n=54) aged 8 to 18 years who had congenital residual defects of the alveolar process of the maxilla. Subgroup 1 (n=13) - boneless bone plasty, subgroup 2 (n=11) - bone plasty using autologous mandibular graft, and subgroup 3 (n=30) - bone plasty with tibial bone graft. The state of oral hygiene of the subgroups was assessed using the Fedorov-Volodkina Hygiene Index (1971) and the level of inflammation of the marginal periodontium was assessed according to the PMA index (Masser-Parma, 1960). The level of oral hygiene in patients of all subgroups before treatment ranged from 2,6 to 3,0 («poor level¼ of oral hygiene). The using of standard prophylactic dental therapy allowed to achieve a «satisfactory¼ level of hygiene in all three clinical subgroups of patients. The condition of the marginal periodontium according to the PMA index in all subgroups corresponded to 35,0% (gingivitis of moderate severity). Preventive treatment reduced the level of inflammation to 15,0-20,0% in all subgroups. The subgroup 3 was the most compliant to treatment. The unsatisfactory oral hygiene level and the condition of periodontal tissues among patients with congenital and residual defects of the maxilla alveolar process increases the risk of postoperative complications. Preventive dental treatment improves oral hygiene and reduces the intensity of the inflammatory process in the marginal periodontium. That is an important and necessary component of the successful comprehensive rehabilitation of the patient with congenital maxillofacial area malformations.

Alveolar Distraction.

Alveolar distraction osteogenesis (ADO) has been used for the reconstruction of atrophic alveolus for decades. The advantage of this technique is that it augments the bone and soft tissues together, creating a better alveolar platform for subsequent surgeries and dental rehabilitation. It is especially useful in patients with large and/or complex alveolar clefts for which approximating the alveolar segments reduces the size of the bony cleft and associated fistula. Displacement of the transported segment is the most frequently encountered complication of ADO but can be managed by constructing case-specific distractors.

Microdont Developing Outside the Alveolar Process and Within Oral Diffuse and Plexiform Neurofibroma in Neurofibromatosis Type 1.

BACKGROUND/AIM: Numerical aberrations of permanent dentition and dystopic tooth eruption are part of the phenotype of the tumor predisposition syndrome neurofibromatosis type 1 (NF1). In these cases, surplus tooth germs usually develop in the alveolar processes of the jaw. This report attests to the dystopic development of a dysplastic supernumerary tooth in NF1 arising outside the jaw. CASE REPORT: The 8-year-old male patient developed a microdont outside the bone and above the occlusal plane of the retained maxillary right second molar. The supernumerary tooth was completely embedded in oral soft tissue. Hyperplastic oral soft tissue in the molar region and microdont were excised. Specimen of the mucosa surrounding the teeth was interspersed with diffuse and plexiform neurofibroma. The retained upper right first molar emerged spontaneously within a few months after surgery. The upper right second molar did not change position. CONCLUSION: Odontogenesis can take place within tumorous oral mucosa in NF1. Surgical removal of the tumorous mucous membrane facilitates tooth eruption in some cases.

Active bone material containing modified recombinant human bone morphogenetic protein 2 induces bone regeneration in the alveolar process cleft in rabbits.

The clinical application of most materials used to fill severe bone defects is limited owing to the insufficient ability of such materials to induce bone regeneration over a long repair period. The purpose of this study was to establish a model for the alveolar process cleft in rabbits to evaluate the effect of active bone material in bone defect repair. The active bone material used in this study is a new bone repair material composed of a heterogeneous collagen membrane implanted with modified recombinant human bone morphogenetic protein 2. This proposed active bone material can specifically bind to collagen. Twenty-four young Japanese white rabbits (JWRs) were selected and randomly divided into four groups (normal, control, material, and bone morphogenetic protein groups). The alveolar process cleft model was established by removing an equal volume bone at the left maxillary position. Blood samples were collected from the JWRs 3 and 6 months after the surgery to evaluate the biocompatibility of the active bone materials. Subsequently, the skull model was established, and the appearance was observed. Imaging methods (including X-ray examination and micro-computerized tomography scanning), tissue staining, and immunohistochemistry were employed for the evaluation. The bone collagen material and active bone material exhibited high biocompatibility. In addition, the ability of the active bone material to induce bone repair and regeneration was higher than that of the bone collagen material. The active bone material exhibited satisfactory bone regeneration performance in rabbits, indicating its potential as an active material for repairing congenital alveolar process clefts in humans.

The Influence of Four Different Treatment Protocols on Maxillofacial Growth in Patients with Unilateral Complete Cleft Lip, Palate, and Alveolus.

BACKGROUND: The purpose of this study was to evaluate the effect of four different treatment protocols on maxillofacial growth in patients aged 7 to 8 years with unilateral complete cleft lip, palate, and alveolus. METHODS: Sixty-one patients with nonsyndromic unilateral complete cleft lip, palate, and alveolus were entered into this study and grouped as follows: group 1 patients had a repaired lip and an unrepaired palate; group 2 patients underwent one-stage palatoplasty; group 3 patients underwent two-stage palatoplasty; and group 4 patients underwent lip adhesion and two-stage palatoplasty. The control group was composed of 16 patients with unilateral incomplete cleft lip. The Kolmogorov-Smirnov test was used to test the nature of data distribution. The Bonferroni test and the Kruskal-Wallis H test were used for multiple comparisons. RESULTS: Group 5 showed a more protruding maxilla (basion-nasion-A point, basion-nasion-anterior nasal spine, sella-nasion-anterior nasal spine; p < 0.05), longer maxillary sagittal length (anterior nasal spine-posterior maxillary point; p < 0.05) and maxillary basal sagittal length (A point-posterior maxillary point; p < 0.05), and a better jaw relationship (A point-nasion-B point angle; p < 0.05) than groups 2, 3, and 4. Group 2 had higher anterior facial height (anterior nasal spine-nasion, anterior nasal spine-menton, nasion-menton; p < 0.05) and posterior facial height (registration point-posterior maxillary point; p < 0.05) than groups 3 and 4. Groups 2 and 3 had better maxillary position (sella-pterygomaxillary fissure; p < 0.05) and deeper bony pharynx (basion-posterior maxillary point; p < 0.05) than group 4. CONCLUSIONS: In patients aged 7 to 8 years with unilateral complete cleft lip, palate, and alveolus, both one- and two-stage palatoplasty inhibited maxillary sagittal growth. Vomer flap repair with denuded bone inhibited maxillary vertical growth. Lip adhesion did adversely affect maxilla position. CLINICAL QUESTION/LEVEL OF EVIDENCE: Therapeutic, III.

Functional stability analyses of maxillofacial skeleton bearing cleft deformities.

The symmetrically stable craniofacial bony structure supports the complex functions and delicate contour of the face. Congenital craniofacial deformities are often accompanied by bony defects and have been repetitively correlated with compromised dento-maxillary stability, but neither the extent nor the pattern of cleft-related maxillary instability has been explored in detail. Furthermore, it is largely unknown if the bony defect and related instability are correlated with secondary maxillary deformity common among patients with orofacial clefts. With the aid of finite element modeling, we studied the detailed relationship between cleft-related bony defect and maxillary stability under occlusal loading. Craniofacial models were generated based on cone-beam computed tomography data and loaded with mimicked bite forces along the axial axis of each tooth. Our data showed that all cleft models exhibited more asymmetrical deformations under mastication compared with the normal. Models with palatal cleft demonstrated greater asymmetry, greater dental arch contraction, and less maxillary protrusion compared to models with alveolar cleft only. For unilateral cleft models, alveolus on non-cleft side tended to be more protruded and lifted than the cleft side. For bilateral cleft models, the most prominent feature was the seriously contracted alveolar arch and curved and pitched premaxillae. These findings indicated cleft type-specific pattern of maxillary instability, which were largely in accordance with dentoalveolar morphological features among patients. Collectively, our study elucidated the detailed relationship between cleft bony defect and the pattern of maxillary instability, and suggested a prototype for studying the abnormal maxillary and dental arch growth among patients with craniofacial deformities.

An assessment and comparison of nasolabial aesthetics in bilateral clefts using the anatomical subunit-based scale: a nasoalveolar moulding versus non-nasoalveolar moulding study.

Nasoalveolar moulding is a presurgical orthopaedic technique used to improve the outcomes of bilateral clefts. However, the lack of a validated scale tailored to bilateral clefts makes it difficult to quantify the merits of nasoalveolar moulding and compare it to other techniques. In this study, a recently published anatomical subunit scale was used to evaluate and compare the early effects of nasoalveolar moulding. Two groups of similarly treated bilateral cleft patients were included: one in which patients underwent presurgical nasoalveolar moulding and one in which they did not. The nasolabial aesthetics were evaluated on two-dimensional photographs at 6 months post cheiloplasty. Cupid's bow, vermilion symmetry, vermilion notching, premaxillary show at rest, scar aesthetics, columella height, columella height, and bialar width were all significantly better in the nasoalveolar moulding group. Using the new scale, it was found that nasolabial aesthetics at 6 months post cheiloplasty were significantly better in patients who had undergone nasoalveolar moulding in infancy.

Quantitative Evaluation of Nasolabial Alterations following Nasoalveolar Molding (NAM) Therapy in Patients with Unilateral Cleft Lip.

The clinical benefit of nasoalveolar molding (NAM) is actively debated between cleft centers without clear consensus. Nasolabial measurements were performed on pediatric patients with unilateral clefts of the lip, with or without cleft palate, at an academic cleft/craniofacial center prior to and following NAM therapy between June 2015 and August 2016. The parameters of interest were: columella height and width, cleft nostril height and width, and lip width. Measurements were performed using photographs taken alongside a reference object. The image output was then scaled to the size of the reference object and the capture angle. Intraclass correlation coefficient was calculated to assess reliability of the photographic measurements. Descriptive statistics (mean, standard deviation [SD]) were calculated to characterize the pre- and post-NAM measurements. Student's t-tests were performed to compare the pre-NAM versus post-NAM measurements. The primary objective was to measure the effect of NAM on the nasal aesthetic units that are known to be anatomically aberrant in the cleft lip patient. Nine patients were included in this study. Average pre-NAM age was 2.5 weeks, and average post-NAM age was 13 weeks. Average columellar height increased from 3.70 mm (SD = 0.14) pre-NAM to 5.85 mm (SD = 1.96) post-NAM (p < 0.01); average columellar width increased from 4.71 mm (SD = 0.49) to 5.93 mm (SD = 0.71) (p < 0.01); average cleft nostril height increased from 3.54 mm (SD = 2.97) to 6.81 mm (SD = 2.98) (p = 0.01); and average cleft nostril width decreased from 15.46 mm (SD = 2.91) to 11.05 mm (SD = 1.01) (p = 0.01). Average lip width decreased from 34.61 mm (SD = 1.73) to 33.87 mm (SD = 3.67); however, this change was not statistically significant (p = 0.16). This study objectively quantifies positive changes in nasal aesthetics associated with NAM therapy, providing further evidence for its utility as a presurgical treatment modality for optimal aesthetic nasal results in the unilateral cleft lip patient. The major limitation of this study was a lack of control group, as our center universally treats complete unilateral cleft lip patients with NAM therapy. However, the authors strongly believe that the positive aesthetic nasal findings would persist if compared with a non-NAM control group.

[Adherence to the treatment of pre surgical nasoalveolar molding in cleft lip and palate]. / Adherencia al tratamiento de moldeado nasoalveolar en pacientes con fisura labiopalatina.

OBJECTIVES: The nasoalveolar molding device (NAM) designed to decrease the size of the defect and improve nasal asymmetry, facilitates surgical intervention improving the results. However, family involvement is highly necessary due to the fact that the treatment herein referred is long and tedious. The aim of this study is to determine adherence to treatment and possible variables that can determine their rejection. MATERIALS AND METHODS: Patients treated with NAM over the last 6 years (64 patients). Retrospective data collection and telephone surveys. 5 groups established depending on its respective adherence to the treatment (from rejection of the treatment to good adherence to it). Several aspects are herein analyzed related to the caregiver, the patient and the social background (degree of education, number of caregivers, distance to the hospital, etc.). Through the SPSS program, a descriptive study was carried out, analyzing the variables using chi2 with Fisher's exact correction. RESULTS: 46 surveys were completed (32 boys and 14 girls), 63% were unilateral, 91% had a cleft palate. Adherence to the treatment was good by 80%, and only 6% rejected the treatment. The adherence was significantly higher, if they had contacted with other families of patients (P < 0.01) and a higher tendency of abandonment of treatment in other nationalities than the Spanish one, although without significant differences. CONCLUSIONS: Adherence to treatment is very good in general, and we can not significantly determine the variables that can condition the rejection of treatment, but contacting with family members of patients or associations of patients makes the adherence greater.

OBJETIVOS: El dispositivo de moldeamiento nasoalveolar (NAM), diseñado para aproximar los segmentos fisurados y mejorar la asimetría nasal, facilita la intervención quirúrgica mejorando los resultados. Sin embargo, necesita gran colaboración por parte de la familia por ser largo, y a veces, tedioso. El objetivo de este trabajo es determinar la adherencia al tratamiento y las posibles variables que puedan determinar su rechazo. MATERIAL Y METODOS: Pacientes tratados con NAM en los últimos 6 años (64 pacientes). Recogida de datos retrospectiva (historias) y encuesta telefónica. Clasificación en 5 grupos según el seguimiento del tratamiento (rechazo del tratamiento hasta un cumplimiento correcto del tratamiento). Analizamos factores relacionados con el cuidador, el paciente y el contexto social (nivel de estudios, número de cuidadores, distancia al hospital, etc.). Mediante el programa SPSS se realizó un estudio descriptivo, analizando las variables mediante chi2 con corrección exacta de Fisher. RESULTADOS: Se completaron las 46 encuestas (32 niños y 14 niñas), el 63% fueron unilaterales, el 91% con fisura palatina. El cumplimiento terapéutico fue bueno en el 80%, y solo el 7% rechazaron el tratamiento. La adherencia fue mayor, de forma significativa, si habían contactado con otras familias de pacientes (P< 0,01) y tendencia a mayor abandono en otras nacionalidades distinta a la española, aunque sin significación estadística. CONCLUSIONES: El cumplimiento terapéutico de estos pacientes es bueno de forma general, y no podemos determinar de forma significativa las variables que pueden condicionar el rechazo al tratamiento, pero si, que el contacto con familiares de afectados o asociaciones de pacientes hacen que la adherencia sea mayor.

Case Report: Managing the postoperative exposure of a non-resorbable membrane surgically.

Alveolar ridge deformities can be caused by several factors. Managing alveolar deformities prior to implant placement is essential to increase bone width, height or both. Several techniques and materials are now available to perform ridge augmentation procedures. The postoperative exposure of the membrane is the most frequent postoperative complications of ridge augmentation procedures. The present case describes the horizontal ridge augmentation procedure and the outcome of surgical attempt to manage post-operative membrane exposure, and shows the unpredictability of managing postoperative membrane exposure surgically.

Cleft Alveolus Reconstruction Using a Three-Dimensional Printed Bioresorbable Scaffold With Human Bone Marrow Cells.

Bone tissue engineering technology based on scaffold has been applied for cleft lip and palate treatment. However, clinical applications of patient-specific three-dimensional (3D) scaffolds have rarely been performed. In this study, a clinical case using patient-specific 3D-printed bioresorbable scaffold with bone marrow stromal cells collected from iliac crest in the operating room has been introduced. At 6-month after transplantation, the bone volume of the newly regenerated bone was approximately 45% of the total defect volume. Bone mineral density of the newly regenerated bone was about 75% compared to the surrounding bone. The Hounsfield unit value was higher than that of cancellous maxillary alveolar bone and lower than that of the cortical maxillary alveolar bone. Bone-marrow-derived mesenchymal stem cells-seeded 3D-printed patient-specific polycaprolactone scaffolds offer a promising alternative for alveolar cleft reconstruction and other bony defects.

Influence of nasoalveolar molding on skeletal development in patients with unilateral cleft lip and palate at 5 years of age.

INTRODUCTION: The aim of this retrospective study was to assess the influence of presurgical nasoalveolar molding (NAM) on skeletal development in patients with operated unilateral cleft lip and palate at 5 years of age. MATERIALS: Lateral cephalometric radiographs of 26 unilateral cleft lip and palate patients who had undergone presurgical NAM (NAM group) and 20 unilateral cleft lip and palate patients who did not have any presurgical NAM (non-NAM group) were analyzed. The radiographs were digitally traced using Quick Ceph Studio software (version 3.5.1.r (1151); Quick Ceph Systems, San Diego, Calif). Independent samples t tests were performed for statistical analysis. RESULTS: No significant differences were observed in sagittal and vertical skeletal measurements between the NAM and non-NAM groups. CONCLUSIONS: NAM resulted in no significant difference in skeletal development in unilateral cleft lip and palate patients compared with those without NAM in early childhood.