Rapid Assembly of Infection-Resistant Coatings: Screening and Identification of Antimicrobial Peptides Works in Cooperation with an Antifouling Background.

Bacterial adhesion and the succeeding biofilm formation onto surfaces are responsible for implant- and device-associated infections. Bifunctional coatings integrating both nonfouling components and antimicrobial peptides (AMPs) are a promising approach to develop potent antibiofilm coatings. However, the current approaches and chemistry for such coatings are time-consuming and dependent on substrates and involve a multistep process. Also, the information is limited on the influence of the coating structure or its components on the antibiofilm activity of such AMP-based coatings. Here, we report a new strategy to rapidly assemble a stable, potent, and substrate-independent AMP-based antibiofilm coating in a nonfouling background. The coating structure allowed for the screening of AMPs in a relevant nonfouling background to identify optimal peptide combinations that work in cooperation to generate potent antibiofilm activity. The structure of the coating was changed by altering the organization of the hydrophilic polymer chains within the coatings. The coatings were thoroughly characterized using various surface analytical techniques and correlated with the efficiency to prevent biofilm formation against diverse bacteria. The coating method that allowed the conjugation of AMPs without altering the steric protection ability of hydrophilic polymer structure results in a bifunctional surface coating with excellent antibiofilm activity. In contrast, the conjugation of AMPs directly to the hydrophilic polymer chains resulted in a surface with poor antibiofilm activity and increased adhesion of bacteria. Using this coating approach, we further established a new screening method and identified a set of potent surface-tethered AMPs with high activity. The success of this new peptide screening and coating method is demonstrated using a clinically relevant mouse infection model to prevent catheter-associated urinary tract infection (CAUTI).

Enhanced antitumor activity of bovine lactoferrin through immobilization onto functionalized nano graphene oxide: an in vitro/in vivo study.

This study aims to improve the anticancer activity of bovine lactoferrin through enhancing its stability by immobilization onto graphene oxide. Bovine lactoferrin was conjugated onto graphene oxide and the conjugation process was confirmed by FT-IR, SDS-PAGE, and UV spectrophotometry. Physical characterization was performed by DLS analysis and atomic force microscopy. The cytotoxicity and cellular uptake of the final construct (CGO-PEG-bLF) was inspected on lung cancer TC-1 cells by MTT assay and flow cytometry/confocal microscopy. The anticancer mechanism of the CGO-PEG-bLF was studied by cell cycle analysis, apoptosis assay, and western blot technique. Finally, the anticancer activity of CGO-PEG-bLF was assessed in an animal model of lung cancer. Size and zeta potential of CGO-PEG-bLF was obtained in the optimum range. Compared with free bLF, more cytotoxic activity, cellular uptake and more survival time was obtained for CGO-PEG-bLF. CGO-PEG-bLF significantly inhibited tumor growth in the animal model. Cell cycle arrest and apoptosis were more induced by CGO-PEG-bLF. Moreover, exposure to CGO-PEG-bLF decreased the phospho-AKT and pro-Caspase 3 levels and increased the amount of cleaved caspase 3 in the treated cells. This study revealed the potential of CGO-PEG as a promising nanocarrier for enhancing the therapeutic efficacy of anticancer agents.

Acid-Stable Ester Linkers for the Solid-Phase Synthesis of Immobilized Peptides.

A series of N-terminally Fmoc-protected linkers of the general formula Fmoc-X-CO-O-Y-COOH have been prepared, where X is -NH-CH2 -CH2 - or -p-(aminomethyl)phenyl- and Y is -(CH2 )n - (n is 1 or 4) or -p-(methyl)phenyl-. These linkers can easily be covalently attached via their C-terminal carboxyl group to a resin bearing a free amino group. After cleavage of the N-terminal Fmoc group, the linkers can be extended by standard solid-phase peptide synthesis techniques. These ester linkers are acid-stable and resistant to the base-mediated diketopiperazine formation that often occurs during the synthesis of ester-bound peptides; they are stable at neutral pH in aqueous buffers for days but can be effectively cleaved with 0.1 m NaOH or aq. ammonia within minutes or hours, respectively. These properties make these ester handles well suited for use as linkers for the solid-phase peptide synthesis of immobilized peptides when the stable on-resin immobilization of the peptides and the testing of their biological properties in aqueous buffers at neutral pH are necessary.

Development of peptide biosensor for the detection of dengue fever biomarker, nonstructural 1.

Dengue virus (DENV) nonstructural 1 (NS1) protein is a specific and sensitive biomarker for the diagnosis of dengue. In this study, an efficient electrochemical biosensor that uses chemically modified affinity peptides was developed for the detection of dengue virus NS1. A series of amino acid-substituted synthetic peptides was rationally designed, chemically synthesized and covalently immobilized to a gold sensor surface. The sensor performance was monitored via square wave voltammetry (SWV) and electrochemical impedance spectroscopy (EIS). Potential affinity peptides specific for NS1 were chosen according to the dynamic current decrease in SWV experiments. Using circular dichroism, the molar ellipticity of peptides (DGV BP1-BP5) was determined, indicating that they had a mostly similar in random coil structure, not totally identical. Using SWV, DGV BP1 was selected as a promising recognition peptide and limit of detection for NS1 was found to be 1.49 µg/mL by the 3-sigma rule. DGV BP1 showed good specificity and stability for NS1, with low signal interference. The validation of the sensor to detect NS1 proteins was confirmed with four dengue virus culture broth (from serotype 1 to 4) as proof-of-concept. The detection performance of our sensor incorporating DGV BP1 peptides showed a statistically significant difference. These results indicate that this strategy can potentially be used to detect the dengue virus antigen, NS1, and to diagnosis dengue fever within a miniaturized portable device in point-of-care testing.

Synthesis and Fabrication of Surface-Active Microparticles Using a Membrane Emulsion Technique and Conjugation of Model Protein via Strain-Promoted Azide-Alkyne Click Chemistry in Physiological Conditions.

The rapid surface immobilization of protein on monodispersed polyester microcarriers is reported. A model protein, functionalized with a dibenzocyclooctyne core, immobilizes on the surface of azide-terminal polycaprolactone microcarriers within 10 min compared to 12 h for other conjugation techniques, and it is conducted in physiological conditions and in the absence of coupling reagents.

Recombinant human follicle stimulating hormone purification by a short peptide affinity chromatography.

Peptide KVPLITVSKAK was selected to design a synthetic ligand for affinity chromatography purification of recombinant human follicle stimulating hormone (rhFSH), based on the interaction of the hormone with the exoloop 3 of its receptor. The peptide was acetylated to improve its stability to degradation by exopeptidases. A cysteine was incorporated at the C-termini to facilitate its immobilization to the chromatographic activated SulfoLink agarose resin. A sample of crude rhFSH was loaded to the affinity column, using 20 mM sodium phosphate, 0.5 mM methionine, and pH 5.6 and 7.2 as adsorption and elution buffers, respectively. The dynamic capacity of the matrix was 54.6 mg rhFSH/mL matrix and the purity 94%. The percentage of oxidized rhFSH was 3.4%, and that of the free subunits was 1.2%, both in the range established by the European Pharmacopeia, as also were the sialic acid content and the isoforms profile.

Supramolecular strategies for protein immobilization and modification.

Protein immobilization and modification are widely used techniques in the fields of chemical biology and biomaterials science. While covalent strategies based on small molecules are traditionally used, supramolecular chemistry offers numerous useful opportunities for guiding the modification locations on complex protein landscapes and introducing different degrees of reversibility into the products. In this opinion, we highlight recent advances in using supramolecular interactions, particularly host-guest chemistry, for controlling protein modification and immobilization. We discuss supramolecular strategies for protein-conjugate purification and capture, as well as for protein modification via host-guest interactions and metal coordination. Lastly, we address recent advances in utilizing supramolecular interactions to direct covalent protein modification. These examples of supramolecular chemical biology present opportunities to advance a wide range of applications, including proteomics and drug delivery.

Peptide coatings enhance keratinocyte attachment towards improving the peri-implant mucosal seal.

There is a critical need for preventing peri-implantitis as its prevalence has increased and dental implants lack features to prevent it. Research strategies to prevent peri-implantitis have focused on modifying dental implants to incorporate different antimicrobial agents. An alternative strategy consists of barring the expansion of the biofilm subgingivally by forming a long-lasting permucosal seal between the soft tissue and the implant surface. Here, we innovatively biofunctionalized titanium with bioinspired peptide coatings to strengthen biological interactions between epithelial cells and the titanium surface. We selected laminin 332- and ameloblastin-derived peptides (Lam, Ambn). Laminin 332 participates in the formation of hemidesmosomes by keratinocytes and promotes epithelial attachment around teeth; and ameloblastin, an enamel derived protein, is involved in tissue regeneration events following disruption of the periodontium. Lam, Ambn or combinations of both peptides were covalently immobilized on titanium discs. Successful immobilization of the peptides was confirmed by contact angle goniometry, X-ray photoelectron spectroscopy and fluorescent labelling of the peptides. Additionally, we confirmed the mechanical and thermochemical stability of the peptides on Ti substrates. Proliferation and hemidesmosome formation of human keratinocytes (TERT-2/OKF-6) were assessed by immunofluorescence labelling. The peptide-coated surfaces increased cell proliferation for up to 48 h in culture compared to control surfaces. Most importantly, formation of hemidesmosomes by keratinocytes was significantly increased on surfaces coated with Ambn + Lam peptides compared to control (p < 0.01) and monopeptide coatings (p < 0.005). Together, these results support the Ambn + Lam multipeptide coating as a promising candidate for inducing a permucosal seal around dental implants.

Molecular construction of HIV-gp120 discontinuous epitope mimics by assembly of cyclic peptides on an orthogonal alkyne functionalized TAC-scaffold.

Mimics of discontinuous epitopes of for example bacterial or viral proteins may have considerable potential for the development of synthetic vaccines, especially if conserved epitopes can be mimicked. However, due to the structural complexity and size of discontinuous epitopes molecular construction of these mimics remains challeging. We present here a convergent route for the assembly of discontinuous epitope mimics by successive azide alkyne cycloaddition on an orthogonal alkyne functionalized scaffold. Here the synthesis of mimics of the HIV gp120 discontinuous epitope that interacts with the CD4 receptor is described. The resulting protein mimics are capable of inhibition of the gp120-CD4 interaction. The route is convergent, robust and should be applicable to other discontinuous epitopes.

Low-Cost Peptide Microarrays for Mapping Continuous Antibody Epitopes.

With the increasing need for understanding antibody specificity in antibody and vaccine research, pepscan assays provide a rapid method for mapping and profiling antibody responses to continuous epitopes. We have developed a relatively low-cost method to generate peptide microarray slides for studying antibody binding. Using a setup of an IntavisAG MultiPep RS peptide synthesizer, a Digilab MicroGrid II 600 microarray printer robot, and an InnoScan 1100 AL scanner, the method allows the interrogation of up to 1536 overlapping, alanine-scanning, and mutant peptides derived from the target antigens. Each peptide is tagged with a polyethylene glycol aminooxy terminus to improve peptide solubility, orientation, and conjugation efficiency to the slide surface.

Immobilization and orientation-dependent activity of a naturally occurring antimicrobial peptide.

A naturally occurring antimicrobial peptide, SMAP-29, was synthesized with an n-terminal or c-terminal cysteine, termed c_SMAP and SMAP_c, respectively, for site-directed immobilization to superparamagnetic beads. Immobilized SMAP orientation-dependent activity was probed against multiple bacteria of clinical interest including Acinetobacter baumannii, Pseudomonas aeruginosa, Bacillus anthracis sterne and Staphylococcus aureus. A kinetic microplate assay was employed to reveal both concentration and time-dependent activity for elucidation of minimum bactericidal concentration (MBC) and sub-lethal effects. Immobilized SMAP activity was equivalent or reduced compared with soluble SMAP_c and c_SMAP regardless of immobilization orientation, with only one exception. A comparison of immobilized SMAP_c and c_SMAP activity revealed a bacteria-specific potency dependent on immobilization orientation, which was contrary to that seen in solution, wherein SMAP_c was more potent against all bacteria than c_SMAP. Sub-MBC kinetic studies displayed the influence of peptide exposure to the cells with multiple bacteria exhibiting increased susceptibility and efficacy at lower concentrations upon extended exposure (i.e. MBC enhancement). For instances in which complete killing was not achieved, two predominant effects were evident: retardation of growth rate and an increased lag phase. Both effects, seen independently and concomitantly, indicate some degree of induced cellular damage that can serve as a predictor toward eventual cell death. SMAP_c immobilized on glass through standard silanization chemistry was also investigated to ascertain the influence of substrate on activity against select bacteria.

"Clickable" Polymeric Nanofibers through Hydrophilic-Hydrophobic Balance: Fabrication of Robust Biomolecular Immobilization Platforms.

Fabrication of hydrophilic polymeric nanofibers that undergo facile and selective functionalization through metal catalyst-free Diels-Alder "click" reaction in aqueous environment is outlined. Electrospinning of copolymers containing an electron-rich furan moiety, hydrophobic methyl methacrylate units and hydrophilic poly(ethylene glycol)s as side chains provide specifically functionalizable yet antibiofouling fibers that remain stable in aqueous media due to appropriate hydrophobic hydrophilic balance. Efficient functionalization of these nanofibers is accomplished through the Diels-Alder reaction by exposing them to maleimide-containing molecules and ligands. Diels-Alder conjugation based functionalization is demonstrated through attachment of fluorescein-maleimide and a maleimide tethered biotin ligand. Biotinylated nanofibers were utilized to mediate immobilization of the protein streptavidin, as well as streptavidin coated quantum dots. Facile fabrication from readily available polymers and their effective functionalization under mild and reagent-free conditions in aqueous media make these "clickable" nanofibers attractive candidates as functionalizable scaffolds for various biomedical applications.

Design of heat shock-resistant surfaces to prevent protein aggregation: Enhanced chaperone activity of immobilized α-Crystallin.

α-Crystallin is a multimeric protein belonging to the family of small heat shock proteins, which function as molecular chaperones by resisting heat and oxidative stress induced aggregation of other proteins. We immobilized α-Crystallin on a self-assembled monolayer on glass surface and studied its activity in terms of the prevention of aggregation of aldolase. We discovered that playing with grafted protein density led to interesting variations in the chaperone activity of immobilized α-Crystallin. This result is in accordance with the hypothesis that dynamicity of subunits plays a vital role in the functioning of α-Crystallin and might be able to throw light on the structure-activity relationship. We showed that the chaperone activity of a certain number of immobilized α-Crystallins was superior compared to a solution containing an equivalent number of the protein and 10 times the number of the protein at temperatures >60 °C. The α-Crystallin grafted surfaces retained activity on reuse. This could also lead to the design of potent heat-shock resistant surfaces that can find wide applications in storage and shipping of protein based biopharmaceuticals.

Conformationally constrained functional peptide monolayers for the controlled display of bioactive carbohydrate ligands.

In this study, we employed thiolated peptides of the conformationally constrained, strongly helicogenic α-aminoisobutyric acid (Aib) residue to prepare self-assembled monolayers (SAMs) on gold surfaces. Electrochemistry and infrared reflection absorption spectroscopy support the formation of very well packed Aib-peptide SAMs. The immobilized peptides retain their helical structure, and the resulting SAMs are stabilized by a network of intermolecular H bonds involving the NH groups adjacent to the Au surface. Binary SAMs containing a synthetically defined glycosylated mannose-functionalized Aib-peptide as the second component display similar features, thereby providing reproducible substrates suitable for the controlled display of bioactive carbohydrate ligands. The efficiency of such Aib-based SAMs as a biomolecular recognition platform was evidenced by examining the mannose-concanavalin A interaction via surface plasmon resonance biosensing.

A biomimetic Protein G affinity adsorbent: an Ugi ligand for immunoglobulins and Fab fragments based on the third IgG-binding domain of Protein G.

This work reports the development of a synthetic affinity adsorbent for immunoglobulins based on the Fab-binding domain of Streptococcal Protein G (SpG-domain III). The ligand (A2C7I1) was synthesized by the four-component Ugi reaction to generate a substituted peptoidal scaffold mimicking key amino acid residues of SpG. Computer-aided analysis suggests a putative binding site on the CH 1 domain of the Fab molecule. In silico studies, supported by affinity chromatography in comparison with immobilized SpG, as well as analytical characterization by liquid chromatography/electrospray ionization-mass spectrometry and (1) H nuclear magnetic resonance of the ligand synthesized in solution, indicated the authenticity and suitability of the designed ligand for the purification of immunoglobulins. The immobilized ligand displayed an apparent static binding capacity of ~17 mg IgG ml(-1) and a dissociation constant of 5.34 × 10(-5) M. Preparative chromatography demonstrated the ability of the immobilized ligand to purify IgG and Fab fragments from crude mammalian and yeast cell cultures, under near physiological ionic strength and pH, to yield proteins of 99% and 93% purity, respectively.

Peptide-bacteria interactions using engineered surface-immobilized peptides from class IIa bacteriocins.

Specificity of the class IIa bacteriocin Leucocin A (LeuA), an antimicrobial peptide active against Gram-positive bacteria, including Listeria monocytogenes , is known to be dictated by the C-terminal amphipathic helical region, including the extended hairpin-like structure. However, its specificity when attached to a substrate has not been investigated. Exploiting properties of LeuA, we have synthesized two LeuA derivatives, which span the amphipathic helical region of the wild-type LeuA, consisting of 14- (14AA LeuA, CWGEAFSAGVHRLA) and 24-amino acid residues (24AA LeuA, CSVNWGEAFSAGVHRLANGGNGFW). The peptides were purified to >95% purity, as shown by analytical RP-HPLC and mass spectrometry. By including an N-terminal cysteine group, the tailored peptide fragments were readily immobilized at the gold interfaces. The resulting thickness and molecular orientation, determined by ellipsometry and grazing angle infrared spectroscopy, respectively, indicated that the peptides were covalently immobilized in a random helical orientation. The bacterial specificity of the anchored peptide fragments was tested against Gram-positive and Gram-negative bacteria. Our results showed that the adsorbed 14AA LeuA exhibited no specificity toward the bacterial strains, whereas the surface-immobilized 24AA LeuA displayed significant binding toward Gram-positive bacteria with various binding affinities from one strain to another. The 14AA LeuA did not show binding as this fragment is most likely too short in length for recognition by the membrane-bound receptor on the target bacterial cell membrane. These results support the potential use of class IIa bacteriocins as molecular recognition elements in biosensing platforms.

A native chemical ligation approach for combinatorial assembly of affibody molecules.

Affinity molecules labeled with different reporter groups, such as fluorophores or radionuclides, are valuable research tools used in a variety of applications. One class of engineered affinity proteins is Affibody molecules, which are small (6.5 kDa) proteins that can be produced by solid phase peptide synthesis (SPPS), thereby allowing site-specific incorporation of reporter groups during synthesis. The Affibody molecules are triple-helix proteins composed of a variable part, which gives the protein its binding specificity, and a constant part, which is identical for all Affibody molecules. In the present study, native chemical ligation (NCL) has been applied for combinatorial assembly of Affibody molecules from peptide fragments produced by Fmoc SPPS. The concept is demonstrated for the synthesis of three different Affibody molecules. The cysteine residue introduced at the site of ligation can be used for directed immobilization and does not interfere with the function of the investigated proteins. This strategy combines a high-yield production method with facilitated preparation of proteins with different C-terminal modifications.

Biomembrane interactions reveal the mechanism of action of surface-immobilized host defense IDR-1010 peptide.

Dissecting the mechanism of action of surface-tethered antimicrobial and immunomodulatory peptides is critical to the design of optimized anti-infection coatings on biomedical devices. To address this, we compared the biomembrane interactions of host defense peptide IDR-1010cys (1) in free form, (2) as a soluble polymer conjugate, and (3) with one end tethered to a solid support with model bacterial and mammalian lipid membranes. Our results show that IDR-1010cys in all three distinct forms interacted with bacterial and mammalian lipid vesicles, but the extent of the interactions as monitored by the induction of secondary structure varied. The enhanced interaction of surface-tethered peptides is well correlated with their very good antimicrobial activities. Our results demonstrate that there may be a difference in the mechanism of action of surface-tethered versus free IDR-1010cys.

Antibacterial surfaces based on polymer brushes: investigation on the influence of brush properties on antimicrobial peptide immobilization and antimicrobial activity.

Primary amine containing copolymer, poly(N,N-dimethylacrylamide-co-N-(3-aminopropyl)methacrylamide hydrochloride) (poly(DMA-co-APMA)), brushes were synthesized on Ti surface by surface-initiated atom transfer radical polymerization (SI-ATRP) in aqueous conditions. A series of poly(DMA-co-APMA) copolymer brushes on titanium (Ti) surface with different molecular weights, thicknesses, compositions, and graft densities were synthesized by changing the SI-ATRP reaction conditions. Cysteine-functionalized cationic antimicrobial peptide Tet213 (KRWWKWWRRC) was conjugated to the copolymers brushes using a maleimide-thiol addition reaction after initial modification of the grafted chains using 3-maleimidopropionic acid N-hydroxysuccinimide ester. The modified surfaces were characterized by X-ray photoelectron spectroscopy (XPS), water contact angle measurements, attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy, atomic force microscopy (AFM), and ellipsometry analysis. The conjugation of the Tet213 onto brushes strongly depended on graft density of the brushes at different copolymer brush compositions. The peptide density (peptides/nm(2)) on the surface varied with the initial composition of the copolymer brushes. Higher graft density of the brushes generated high peptide density (pepetide/nm(2)) and lower number of peptides/polymer chain and vice versa. The peptide density and graft density of the chains on surface greatly influenced the antimicrobial activity of peptide grafted polymer brushes against Pseudomonas aeruginosa.

Clickable enzyme-linked immunosorbent assay.

Click chemistry is explored as a potential cost-effective and selective immobilization method for the production of an enzyme-linked immunosorbent assay (ELISA). Coatings were formulated containing either a terminal alkyne or a bicyclo[6.1.0]non-4-yne (BCN) chemical handle, and a diagnostic peptide was subsequently immobilized onto these coatings by the copper-catalyzed azide-alkyne 1,3-dipolar cycloaddition (CuAAC) or copper-free strain-promoted azide-alkyne 1,3-dipolar cycloaddition (SPAAC), respectively. The terminal alkyne-containing coating showed high background levels in subsequent ELISA's due to the copper catalyst used in the immobilization step. The BCN-containing coating, however, was successfully employed and presents a cost-effective alternative to existing (strept)avidin-biotin immobilization methods. This technology was illustrated with an ELISA used for the diagnosis of rheumatoid arthritis (RA) but could be easily applied to a wide range of diagnostic tests.