Development and antimicrobial activity of composite edible films of chitosan and nisin incorporated with perilla essential oil-glycerol monolaurate emulsions.

Aquatic products are highly susceptible to spoilage, and preparing composite edible film with essential oil is an effective solution. In this study, composite edible films were prepared using perilla essential oil (PEO)-glycerol monolaurate emulsions incorporated with chitosan and nisin, and the film formulation was optimized by response surface methodology. These films were applied to ready-to-eat fish balls and evaluated over a period of 12 days. The films with the highest inhibition rate against Staphylococcus aureus were acquired using a polymer composition of 6 µL/mL PEO, 18.4 µg/mL glycerol monolaurate, 14.2 mg/mL chitosan, and 11.0 µg/mL nisin. The fish balls coated with the optimal edible film showed minimal changes in appearance during storage and significantly reduced total bacterial counts and total volatile basic nitrogen compared to the control groups. This work indicated that the composite edible films containing essential oils possess ideal properties as antimicrobial packaging materials for aquatic foods.

Investigating the influence of eco-friendly approaches on saline soil traits and growth of common bean plants (Phaseolus vulgaris L.).

Soil salinization significantly impacts agricultural lands and crop productivity in the study area. Moreover, freshwater scarcity poses a significant obstacle to soil reclamation and agricultural production. Therefore, eco-friendly strategies must be adopted for agro-ecosystem sustainability under these conditions. A study conducted in 2022 and 2023 examined the interaction effects of various soil mulching materials (unmulched, white plastic, rice straw, and sawdust) and chitosan foliar spray application (control, 250 mg L-1 of normal chitosan, 125 mg L-1 of nano chitosan, and 62.5 mg L-1 of nano chitosan) on the biochemical soil characteristics and productivity of common beans in clay-saline soil. Higher organic matter, available nutrient content, and total bacteria count in soils were found under organic mulching treatments (rice straw and sawdust). In contrast, the white plastic mulching treatment resulted in the lowest values of soil electrical conductivity (EC) and the highest soil water content. Conversely, chitosan foliar spray treatments had the least impact on the chemical properties of the soil. Plants sprayed with 62.5 mg L-1 of nano chitosan exhibited higher chlorophyll content, plant height, fresh weight of shoots and roots, seed yield, and nutrient content compared to other chitosan foliar spray applications. All treatments studied led to a significant reduction in fungal communities and Na% in plants. The combined effect of organic mulch materials and foliar spray application of 62.5 mg L-1 nano chitosan appeared to enhance biochemical saline soil properties and common bean productivity.

Composite microneedles loaded with Astragalus membranaceus polysaccharide nanoparticles promote wound healing by curbing the ROS/NF-κB pathway to regulate macrophage polarization.

The healing of chronic diabetic wounds remains a formidable challenge in modern times. In this study, a novel traditional Chinese medicine microneedle patch was designed based on the physiological characteristics of wounds, with properties including hemostasis, anti-inflammatory, antioxidant, antimicrobial, and induction of angiogenesis. Initially, white peony polysaccharide (BSP) with hemostatic properties and carboxymethyl chitosan (CMCS) with antimicrobial capabilities were used as materials for microneedle fabrication. To endow it with antimicrobial, procoagulant, and adhesive properties. Among them, loaded with ROS-sensitive nanoparticles of Astragalus polysaccharides (APS) based on effective components baicalein (Bai) and berberine (Ber) from Scutellaria baicalensis (SB) and Coptis chinensis (CC) drugs (APB@Ber). Together, they are constructed into multifunctional traditional Chinese medicine composite microneedles (C/B@APB@Ber). Bai and Ber synergistically exert anti-inflammatory and antimicrobial effects. Microneedle patches loaded with BSP and APS exhibited significant effects on cell proliferation and angiogenesis induction. The combination of composite polysaccharides enabled the microneedles to adhere stably to wounds and provide sufficient strength to penetrate the biofilm and induce dispersion. The combination of composite polysaccharides enabled the microneedles to adhere stably to wounds and provide sufficient strength to penetrate the biofilm and induce dispersion. Therefore, traditional Chinese medicine multifunctional microneedle patches offer potential medical value in promoting the healing of diabetic wounds.

A thermal cross-linking approach to developing a reinforced elastic chitosan cryogel for hemostatic management of heavy bleeding.

Uncontrolled hemorrhage stands as the primary cause of potentially preventable deaths following traumatic injuries in both civilian and military populations. Addressing this critical medical need requires the development of a hemostatic material with rapid hemostatic performance and biosafety. This work describes the engineering of a chitosan-based cryogel construct using thermo-assisted cross-linking with α-ketoglutaric acid after freeze-drying. The resulting cryogel exhibited a highly interconnected macro-porous structure with low thermal conductivity, exceptional mechanical properties, and great fluid absorption capacity. Notably, assessments using rabbit whole blood in vitro, as well as rat liver volume defect and femoral artery injury models simulating severe bleeding, showed the remarkable hemostatic performance of the chitosan cryogel. Among the cryogel variants with different chitosan molecular weights, the 150 kDa one demonstrated superior hemostatic efficacy, reducing blood loss and hemostasis time by approximately 73 % and 63 % in the hepatic model, and by around 60 % and 68 %, in the femoral artery model. Additionally, comprehensive in vitro and in vivo evaluations underscored the good biocompatibility of the chitosan cryogel. Taken together, these results strongly indicate that the designed chitosan cryogel configuration holds significant potential as a safe and rapid hemostatic material for managing severe hemorrhage.

Crocin-1 laden thermosensitive chitosan-based hydrogel with smart anti-inflammatory performance for severe full-thickness burn wound therapeutics.

Burns are the fourth most common type of civilian trauma worldwide, and the management of severe irregular scald wounds remains a significant challenge. Herein, crocin-1 laden hydroxybutyl chitosan (CRO-HBC) thermosensitive hydrogel with smart anti-inflammatory performance was developed for accelerating full-thickness burn healing. The injectable and shape adaptability of the CRO-HBC gel make it a promising candidate for effectively filling scald wounds with irregular shapes, while simultaneously providing protection against external pathogens. The CRO-HBC gel network formed by hydrophobic interactions exhibited an initial burst release of crocin-1, followed by a gradual and sustained release over time. The excessive release of ROS and pro-inflammatory cytokines should be effectively regulated in the early stage of wound healing. The controlled release of crocin-1 from the CRO-HBC gel adequately addresses this requirement for wound healing. The CRO-HBC hydrogel also exhibited an excellent biocompatibility, an appropriate biodegradability, keratinocyte migration facilitation properties, and a reactive oxygen species scavenging capability. The composite CRO-HBC hydrogel intelligently mitigated inflammatory responses, promoted angiogenesis, and exhibited a commendable efficacy for tissue regeneration in a full-thickness scalding model. Overall, this innovative temperature-sensitive CRO-HBC injectable hydrogel dressing with smart anti-inflammatory performance has enormous potential for managing severe scald wounds.

Photothermal enhanced antibacterial chitosan-based polydopamine composite hydrogel for hemostasis and burn wound repairing.

Bleeding and bacterial infection are common problems associated with wound treatment, while effective blood clotting and vessel regeneration promotion are the primary considerations to design the wound dressing materials. This research presents a chitosan-based hydrogel with grafted quaternary ammonium and polyphosphate (QCSP hydrogel) as the antibacterial hemostatic dressing to achieve burn wound treatment. The tissue adhesion of the hydrogel sealed the blood flow and the polyphosphate grafted to the chitosan promoted the activation of coagulation factor V to enhance the hemostasis. At the same time, the grafted quaternary ammonium enhanced the antibacterial ability of the biodegradable hydrogel wound dressing. In addition, the polydopamine as a photothermal agent was composited into the hydrogel to enhance the antibacterial and reactive oxygen scavenging performance. The in vivo hemostasis experiment proved the polyphosphate enhanced the coagulation property. Moreover, this photothermal property of the composite hydrogel enhanced the burn wound repairing rate combined with the NIR stimulus. As a result, this hydrogel could have potential application in clinic as dressing material for hemostasis and infection prone would repairing.

A composite patch loaded with 2-Deoxy Glucose facilitates cardiac recovery after myocardial infarction via attenuating local inflammatory response.

Local inflammatory microenvironment in the early stage of myocardial infarction (MI) severely impaired cardiac recovery post-MI. Macrophages play a pivotal role in this process. A classical glycolytic inhibitor, 2-Deoxy-Glucose (2-DG), has been found to regulate the excessive pro-inflammatory macrophage polarization in the infarcted myocardium. This study investigated the effect of 2-DG-loaded chitosan/gelatin composite patch on the infarct microenvironment post-MI and its impact on cardiac repair. The results showed that the 2-DG patch significantly inhibited the expression of inflammatory cytokines, alleviated reactive oxygen species (ROS) accumulation, repressed the proinflammatory polarization of macrophages, attenuated local inflammatory microenvironment in the ischemic hearts, as well as improved cardiac function, reduced scar size, and promoted angiogenesis post-MI. In terms of mechanism, 2-DG exerts anti-inflammatory effects through inhibiting the NF-κB signaling pathway and reducing the assembly and activation of the NLRP3 inflammasome. These findings suggest that 2-DG composite patch may represent a promising therapeutic strategy for cardiac repair after MI.

Effect of feeding chitosan and blend of essential organic acids on growth performance, haematological parameters and innate immunity in early aged male layer chicks.

The use of antibiotics as conventional feed additives in poultry operations have proven useful, however resulted serious health concerns to consumer due to their bio-accumulation, besides rising problem of antimicrobial resistance in microbes, thus, an alternative to antibiotic growth promoter have called for. One of the aim of the experiment was to assess the lone and combined effects of feeding of chitosan oligosaccharide (COS) and blend of organic acids and short chain fatty acids in essential oils on growth performance, haematological parameters, relative lymphoid organ weight and innate immunity in early aged layer chick (male birds). A total of ninety, day-old chicks were randomly allotted into five groups: CO, Control group fed only poultry feed ; AGP, antibiotic growth promoter fed Avilomycin at the dose of 200 mg/kg of poultry feed; CH, chitosan oligosaccharide fed at the rate of 100 mg/kg feed; OE, blend of organic acids and short chain fatty acids in essential oils contained 1000 to 2000 mg/kg feed in a graded dose per week and CH + OE, chitosan oligosaccharide plus blend of organic acids and short chain fatty acids in essential oils at consistent rate and manner as followed for each of given feed additives when fed individually. Data on growth performance, samples for haematological parameters and innate immunity were measured and assayed on 7th, 21st and 42nd day post feeding (dpf) respectively. The results showed that compared with the control group; there is a marginal gain in body weight at 7th and 21st dpf in CH group and the corresponding CH + OE group. Feed conversion ratio in CH group was remarkably good at 7th and 21st dpf. No significant difference was observed in relative organ weights of thymus, spleen and Bursa of Fabricius in treatment groups as compared to control birds; however a significant rise in splenic weight index in OE fed birds at 42nd dpf noted. Haematological changes were inconsequential in treatment groups with an exception to enhancement of heterophil to lymphocyte ratio (H:L ratio) in CH group at 42nd dpf. Serum lysozyme activity proportionately elevated in CH + OE group on 21st and 42nd dpf when measured against control group; on the other hand no detectable augmentation of gut lysozyme activity observed. Both serum bactericidal and gut bactericidal activity boosted in combinatorial group at 42nd dpf. These results indicated that early age feeding of chitosan individually or combination with organic acids and short chain fatty acids in layer chick is beneficial, as it has the potential to enhance body weight gain to some extent and improves systemic and localized innate immunity to offer protection against infectious assaults thus may avoid early chick mortality in farms.

Development and Characterization of a Novel Composite Hydrogel Biomaterial for Improved Mucoperiosteal Wound Repair.

Mucoperiosteal wound healing, as it occurs after pediatric cleft palate surgery, can be challenging due to the limitations of current treatments such as tissue flaps secured with sutures and fibrin glue. In this study, we characterized the in vitro performance of a novel composite hydrogel biomaterial designed to be employed as an in situ wound filler and enhance mucoperiosteal wound healing. We evaluated a range of photopolymerizable formulations containing methacrylated gelatin (GelMA), glycol chitosan, and bioglass microparticles. Our aim was to identify one or more formulations with an appropriate balance of properties against a set of functional requirements that we established for this application. To test the formulations against these criteria, we measured photopolymerization kinetics, mechanical properties, degradation rate, in vitro biocompatibility, and ex vivo tissue adhesion. All formulations polymerized in less than 90 s using violet light. In addition, we found that GelMA-based hydrogels were more adhesive to mucoperiosteal tissue than clinical standard fibrin glue. Inclusion of small amounts of bioglass in the formulation increased mechanical compatibility with mucoperiosteal tissue, enhanced cytoconductivity, and promoted cell proliferation. Taken together, our results support the suitability of these photopolymerized composite hydrogels as in situ mucoperiosteal wound fillers. Overall, this study lays the groundwork for investigating the in vivo, pre-clinical effectiveness of these composite hydrogels in improving mucoperiosteal wound healing outcomes.

Anti-Helicobacter pylori activity of nanocomposites from chitosan/broccoli mucilage/selenium nanoparticles.

Helicobacter pylori can infect most people worldwide to cause hazardous consequences to health; the bacteria could not easily be controlled or disinfected. Toward exploring of innovative biocidal nanoformulations to control H. pylori, broccoli seeds (Brassica oleracea var. italica) mucilage (MBS) was employed for biosynthesizing selenium nanoparticles (MBS/SeNPs), which was intermingled with chitosan nanoparticles (NCT) to generate bioactive nanocomposites for suppressing H. pylori. The MBS could effectually generate and stabilize SeNPs with 13.61 nm mean diameter, where NCT had 338.52 nm mean diameter and positively charged (+ 39.62 mV). The cross-linkages between NCT-MBS-SeNPs were verified via infrared analysis and the nanocomposites from NCT:MBS/SeNPs at 1:2 (T1), 1:1 (T2) and 2:1 (T3) ratios had mean diameters of 204, 132 and 159 nm, respectively. The entire nanomaterials/composites exhibited potent anti- H. pylori activities using various assaying methods; the T2 nanocomposite was the utmost bactericidal agent with 0.08-0.10 mg/L minimal concentration and 25.9-27.3 mm inhibition zones. The scanning microscopy displayed the ability of nanocomposite to attach the bacterial cells, disrupt their membranes, and completely lyse them within 10 h. The NCT/MBS/SeNPs nanocomposites provided effectual innovative approach to control H. pylori.

Ionically-crosslinked carboxymethyl chitosan scaffolds by additive manufacturing for antimicrobial wound dressing applications.

Chitosan chemical functionalization is a powerful tool to provide novel materials for additive manufacturing strategies. The main aim of this study was the employment of computer-aided wet spinning (CAWS) for the first time to design and fabricate carboxymethyl chitosan (CMCS) scaffolds. For this purpose, the synthesis of a chitosan derivative with a high degree of O-substitution (1.07) and water soluble in a large pH range allowed the fabrication of scaffolds with a 3D interconnected porous structure. In particular, the developed scaffolds were composed of CMCS fibers with a small diameter (< 60 µm) and a hollow structure due to a fast non solvent-induced coagulation. Zn2+ ionotropic crosslinking endowed the CMCS scaffolds with stability in aqueous solutions, pH-sensitive water uptake capability, and antimicrobial activity against Escherichia coli and Staphylococcus aureus. In addition, post-printing functionalization through collagen grafting resulted in a decreased stiffness (1.6 ± 0.3 kPa) and a higher elongation at break (101 ± 9 %) of CMCS scaffolds, as well as in their improved ability to support in vitro fibroblast viability and wound healing process. The obtained results encourage therefore further investigation of the developed scaffolds as antimicrobial wound dressing hydrogels for skin regeneration.

Coagulopathy-independent injectable catechol-functionalized chitosan shape-memory material to treat non-compressible hemorrhage.

Uncontrolled non-compressible hemorrhage, which is often accompanied by coagulopathy, is a major cause of mortality following traumatic injuries in civilian and military populations. In this study, coagulopathy-independent injectable catechol-modified chitosan (CS-HCA) hemostatic materials featuring rapid shape recovery were fabricated by combining controlled sodium tripolyphosphate-crosslinking with hydrocaffeic acid (HCA) grafting. CS-HCA exhibited robust mechanical strength and rapid blood-triggered shape recovery. Furthermore, CS-HCA demonstrated superior blood-clotting ability, enhanced blood cell adhesion and activation, and greater protein adsorption than commercial hemostatic gauze and Celox. CS-HCA showed enhanced procoagulant and hemostatic capacities in a lethal liver-perforation wound model in rabbits, particularly in heparinized rabbits. CS-HCA is suitable for mass manufacturing and shows promise as a clinically translatable hemostat.

Mechanisms of slow-release antibacterial properties in chitosan­titanium dioxide stabilized perilla essential oil Pickering emulsions: Focusing on oil-water interfacial behaviors.

Perilla essential oil (PLEO) offers benefits for food preservation and healthcare, yet its instability restricts its applications. In this study, chitosan (CS) and TiO2 used to prepare composite particles. TiO2, after being modified with sodium laurate (SL), was successfully introduced at 0.1 %-3 % into the CS matrix. The resulting CS-SL-TiO2 composite particles can be formed by intertwining and rearranging through intramolecular and intermolecular interactions, and form an O/W interface with stability and viscoelasticity. The Pickering emulsions stabilized by these particles exhibit non-Newtonian pseudoplastic behavior, shear-thinning properties, and slow-release characteristics, along with antibacterial activity. Emulsions with 0.5 % and 1 % CS-SL-TiO2 composites demonstrated superior antibacterial effects against Escherichia coli and Staphylococcus aureus. The study revealed that all emulsions undergo Fickian diffusion and a sustained release of PLEO, with the Ritger-Peppas model best describing this release mechanism. The slow-release behaviors positively correlates with interfacial pressure, composite particle size, composite particle potential, composite contact angle, emulsion particle size and emulsion potential, but negatively correlates with diffusion rate, penetration rate, release kinetics and release rate. The findings lay groundwork for developing slow-release antimicrobial emulsions within polysaccharide matrices, showcasing promise for antimicrobial packaging solutions and enhanced food preservation techniques.

Dihydromyricetin-loaded oxidized polysaccharide/L-arginine chitosan adhesive hydrogel promotes bone regeneration by regulating PI3K/AKT signaling pathway and MAPK signaling pathway.

Bone defects caused by trauma, infection and congenital diseases still face great challenges. Dihydromyricetin (DHM) is a kind of flavone extracted from Ampelopsis grossedentata, a traditional Chinese medicine. DHM can enhance the osteogenic differentiation of human bone marrow mesenchymal stem cells with the potential to promote bone regeneration. Hydrogel can be used as a carrier of DHM to promote bone regeneration due to its unique biochemical characteristics and three-dimensional structure. In this study, oxidized phellinus igniarius polysaccharides (OP) and L-arginine chitosan (CA) are used to develop hydrogel. The pore size and gel strength of the hydrogel can be changed by adjusting the oxidation degree of oxidized phellinus igniarius polysaccharides. The addition of DHM further reduce the pore size of the hydrogel (213 µm), increase the mechanical properties of the hydrogel, and increase the antioxidant and antibacterial activities of the hydrogel. The scavenging rate of DPPH are 72.30 ± 0.33 %, and the inhibition rate of E.coli and S.aureus are 93.12 ± 0.38 % and 94.49 ± 1.57 %, respectively. In addition, PCAD has good adhesion and biocompatibility, and its extract can effectively promote the osteogenic differentiation of MC3T3-E1 cells. Network pharmacology and molecular docking show that the promoting effect of DHM on osteogenesis may be achieved by activating the PI3K/AKT and MAPK signaling pathways. This is confirmed through in vitro cell experiments and in vivo animal experiments.

Antivirulence activities of Rutin-loaded chitosan nanoparticles against pathogenic Staphylococcus aureus.

BACKGROUND: Staphylococcus aureus is an infectious bacterium that is frequently found in healthcare settings and the community. This study aimed to prepare rutin-loaded chitosan nanoparticles (Rut-CS NPs) and assess their antibacterial activity against pathogenic strains of S. aureus. RESULTS: The synthesized Rut-CS NPs exhibited an amorphous morphology with a size ranging from 160 to 240 nm and a zeta potential of 37.3 mV. Rut-CS NPs demonstrated significant antibacterial activity against S. aureus strains. Following exposure to Rut-CS NPs, the production of staphyloxanthin pigment decreased by 43.31-89.63%, leading to increased susceptibility of S. aureus to hydrogen peroxide. Additionally, visual inspection of cell morphology indicated changes in membrane integrity and permeability upon Rut-CS NPs exposure, leading to a substantial increase (107.07-191.08%) in cytoplasmic DNA leakage in the strains. Furthermore, ½ MIC of Rut-CS NPs effectively inhibited the biofilm formation (22.5-37.5%) and hemolytic activity (69-82.59%) in the S. aureus strains. CONCLUSIONS: Our study showcases that Rut-CS NPs can serve as a novel treatment agent to combat S. aureus infections by altering cell morphology and inhibiting virulence factors of S. aureus.

Modified Chitosan-Based Coating/Packaging Composites with Enhanced Antibacterial, Antioxidant, and UV-Resistant Properties for Fresh Food Preservation.

Chitosan-based biomass packaging materials are a promising material for food preservation, but their limited solubility, antioxidant capacity, UV resistance, and mechanical properties severely restrict their application. In this study, we developed a novel chitosan-based coating/packaging composite (QCTO) using quaternary ammonium salt and tannic acid (TA)-modified chitosan (QCS-TA) and oxidized chitosan (OCS). The introduction of quaternary ammonium salt and TA effectively improves the water solubility and antibacterial, antioxidant, and UV-resistant properties of chitosan. The Schiff-base bond formed between OCS and QCS-TA, along with the TA-mediated multiple interactions, conferred the prepared composite film with good mechanical properties (69.9 MPa tensile strength) and gas barrier performance to water (14.3 g·h-1·m-2) and oxygen (3.5 g·mm·m-2·h-1). Meanwhile, the prepared QCTO composites demonstrate excellent biocompatibility and safety and are applied as coatings for strawberries and bananas as well as packaging films for mushrooms. These preservation experiments demonstrated that the prepared composites are able to effectively reduce weight loss, prevent microbial growth, maintain color, and significantly prolong the shelf life of fresh products (bananas, strawberries, and mushrooms extended shelf life by 6, 5, and 6 days, respectively). Therefore, the developed QCTO coating/packaging film shows great potential for applications in the field of food preservation and packaging.

The protective effects of chitosan and curcumin nanoparticles against the hydroxyapatite nanoparticles-induced neurotoxicity in rats.

Hydroxyapatite nanoparticles (HANPs) have extensive applications in biomedicine and tissue engineering. However, little information is known about their toxicity. Here, we aim to investigate the possible neurotoxicity of HANPs and the possible protective role of chitosan nanoparticles (CNPs) and curcumin nanoparticles (CUNPs) against this toxicity. In our study, HANPs significantly reduced the levels of neurotransmitters, including acetylcholine (Ach), dopamine (DA), serotonin (SER), epinephrine (EPI), and norepinephrine (NOR). HANPs significantly suppressed cortical expression of the genes controlling mitochondrial biogenesis such as peroxisome proliferator activator receptor gamma coactivator 1α (PGC-1α) and mitochondrial transcription factor A (mTFA). Our findings revealed significant neuroinflammation associated with elevated apoptosis, lipid peroxidation, oxidative DNA damage and nitric oxide levels with significant decline in the antioxidant enzymes activities and glutathione (GSH) levels in HANPs-exposed rats. Meanwhile, co-supplementation of HANP-rats with CNPs and/or CUNPs significantly showed improvement in levels of neurotransmitters, mitochondrial biogenesis, oxidative stress, DNA damage, and neuroinflammation. The co-supplementation with both CNPs and CUNPs was more effective to ameliorate HANPs-induced neurotoxicity than each one alone. So, CNPs and CUNPs could be promising protective agents for prevention of HANPs-induced neurotoxicity.

Chitosan coatings on titanium-based implants - From development to characterization and behavior: A systematic review.

Chitosan is a promising natural polymer for coatings, it combines intrinsic antibacterial and pro-osteoblastic properties, but the literature still has a gap from the development to behavior of these coatings, so this systematic review aimed to answer, "What is the relationship between the physical and chemical properties of polymeric chitosan coatings on titanium implants on antibacterial activity and osteoblast viability?". PRISMA guidelines was followed, the search was applied into 4 databases and grey literature, without the restriction of time and language. The selection process occurred in 2 blinded steps by the authors. The criteria of eligibility were in vitro studies that evaluated the physical, chemical, microbiological, and biological properties of chitosan coatings on titanium surfaces. The risk of bias was analyzed by the specific tool. Of 734 potential articles 10 were included; all had low risk of bias. The coating was assessed according to the technique of fabrication, FT-IR, thickness, adhesion, roughness, wettability, antibacterial activity, and osteoblast viability. The analyzed coatings showed efficacy on antibacterial activity and cytocompatibility dependent on the class of material incorporated. Thus, this review motivates the development of time-dependent studies to optimize manufacturing and allow for an increase in patents and availability on the market.

Vibriocidal efficacy of Bifidobacterium bifidum and Lactobacillus acidophilus cell-free supernatants encapsulated in chitosan nanoparticles against multi-drug resistant Vibrio cholerae O1 El Tor.

BACKGROUND: Cholera is a diarrheal disease recognized for being caused by toxin-producing Vibrio (V.) cholerae. This study aims to assess the vibriocidal and immunomodulatory properties of derived cell-free supernatants (CFSs) of Bifidobacterium (B.) bifidum and Lactobacillus (L.) acidophilus encapsulated in chitosan nanoparticles (CFSb-CsNPs and CFSa-CsNPs) against clinical multi-drug resistance (MDR) isolates of V. cholerae O1 El Tor. METHODS: We synthesized CFSb-CsNPs and CFSa-CsNPs using the ionic gelation technique. The newly nanostructures were characterized for size, surface zeta potential, morphology, encapsulation efficacy (EE), stability in different pH values and temperatures, release profile, and in vitro cytotoxicity. The antimicrobial and antibiofilm effects of the obtained nanocomposites on clinical MDR isolates (N = 5) of V. cholerae E1 Tor O1 were investigated by microbroth dilution assay and crystal violet staining, respectively. We conducted quantitative real-time PCR (qRT-PCR) to analyze the relative gene expressions of Bap, Rbmc, CTXAB, and TCP in response to CFSb-CsNPs and CFSa-CsNPs. Additionally, the immunomodulatory effects of formulated structures on the expression of TLR2 and TLR4 genes in human colorectal adenocarcinoma cells (Caco-2) were studied. RESULTS: Nano-characterization analyses indicated that CFSb-CsNPs and CFSa-CsNPs exhibit spherical shapes under scanning electron microscopy (SEM) imaging, with mean diameters of 98.16 ± 0.763 nm and 83.90 ± 0.854 nm, respectively. Both types of nanoparticles possess positive surface charges. The EE% of CFSb-CsNPs was 77 ± 4.28%, whereas that of CFSa-CsNPs was 62.5 ± 7.33%. Chitosan (Cs) encapsulation leads to increased stability of CFSs in simulated pH conditions of the gastrointestinal tract in which the release rates for CFSb-CsNPs and CFSa-CsNPs were reached at 58.00 ± 1.24% and 55.01 ± 1.73%, respectively at pH = 7.4. The synergistic vibriocidal effects observed from the co-administration of both CFSb-CsNPs and CFSa-CsNPs, as evidenced by a fractional inhibitory concentration (FIC) index of 0.57, resulting in a significantly lower MIC of 2.5 ± 0.05 mg/mL (p < 0.0001) compare to individual administration. The combined antibacterial effect of CFSb-CsNPs and CFSa-CsNPs on Bap (0.14 ± 0.05), Rbmc (0.24 ± 0.01), CTXAB (0.30 ± 0.09), and TCP (0.38 ± 0.01) gene expression was significant (p < 0.001). Furthermore, co-administration of CFSb-CsNPs and CFSa-CsNPs also demonstrated the potency of suppressing TLR 2/4 (0.20 ± 0.01 and 0.12 ± 0.02, respectively) gene expression (p = 0.0019) and reduced Caco-2 cells attached bacteria to 526,000 ± 51,46 colony-forming units/mL (11.19%) (p < 0.0001). CONCLUSION: Our study revealed that encapsulating CFSs within CsNPs enhances their vibriocidal activity by improving stability and enabling a controlled release mechanism at the site of interaction between the host and bacteria. Additionally, the simultaneous use of CFSb-CsNPs and CFSa-CsNPs exhibited superior vibriocidal potency against MDR V. cholerae O1 El Tor strains, indicating these combinations as a potential new approach against MDR bacteria.

Synergistic nanocoating with layer-by-layer functionalized PCL membranes enhanced by manuka honey and essential oils for advanced wound healing.

Chronic wounds represent a significant global health concern, statistically impacting 1-2% of the population in developed countries throughout their lifetimes. These wounds cause considerable discomfort for patients and necessitate substantial expenditures of time and resources for treatment. Among the emerging therapeutic approaches, medicated dressings incorporating bioactive molecules, including natural compounds, are particularly promising. Hence, the objective of this study was to develop novel antimicrobial dressings for wound treatment. Specifically, polycaprolactone membranes were manufactured using the electrospinning technique and subsequently coated with natural polyelectrolytes (chitosan as a polycation and a mixture of manuka honey with essential oils nanoemulsions as a polyanion) employing the Layer-by-Layer assembly technique. Physico-chemical and morphological characterization was conducted through QCM-D, FTIR-ATR, XPS, and SEM analyses. The results from SEM and QCM-D demonstrated successful layer deposition and coating formation. Furthermore, FTIR-ATR and XPS analyses distinguished among different coating compositions. The coated membranes were tested in the presence of fibroblast cells, demonstrating biocompatibility and expression of genes coding for VEGF, COL1, and TGF-ß1, which are associated with the healing process (assessed through RT-qPCR analysis). Finally, the membranes exhibited excellent antibacterial activity against both Staphylococcus aureus and Pseudomonas aeruginosa, with higher bacterial strain inhibition observed when cinnamon essential oil nanoemulsion was incorporated. Taken together, these results demonstrate the potential application of nanocoated membranes for biomedical applications, such as wound healing.