Structural basis of RNA polymerase I pre-initiation complex formation and promoter melting.

Transcription of the ribosomal RNA precursor by RNA polymerase (Pol) I is a prerequisite for the biosynthesis of ribosomes in eukaryotes. Compared to Pols II and III, the mechanisms underlying promoter recognition, initiation complex formation and DNA melting by Pol I substantially diverge. Here, we report the high-resolution cryo-EM reconstruction of a Pol I early initiation intermediate assembled on a double-stranded promoter scaffold that prevents the establishment of downstream DNA contacts. Our analyses demonstrate how efficient promoter-backbone interaction is achieved by combined re-arrangements of flexible regions in the 'core factor' subunits Rrn7 and Rrn11. Furthermore, structure-function analysis illustrates how destabilization of the melted DNA region correlates with contraction of the polymerase cleft upon transcription activation, thereby combining promoter recruitment with DNA-melting. This suggests that molecular mechanisms and structural features of Pol I initiation have co-evolved to support the efficient melting, initial transcription and promoter clearance required for high-level rRNA synthesis.

The cryo-EM structure of a 12-subunit variant of RNA polymerase I reveals dissociation of the A49-A34.5 heterodimer and rearrangement of subunit A12.2.

RNA polymerase (Pol) I is a 14-subunit enzyme that solely transcribes pre-ribosomal RNA. Cryo-electron microscopy (EM) structures of Pol I initiation and elongation complexes have given first insights into the molecular mechanisms of Pol I transcription. Here, we present cryo-EM structures of yeast Pol I elongation complexes (ECs) bound to the nucleotide analog GMPCPP at 3.2 to 3.4 Å resolution that provide additional insight into the functional interplay between the Pol I-specific transcription-like factors A49-A34.5 and A12.2. Strikingly, most of the nucleotide-bound ECs lack the A49-A34.5 heterodimer and adopt a Pol II-like conformation, in which the A12.2 C-terminal domain is bound in a previously unobserved position at the A135 surface. Our structural and biochemical data suggest a mechanism where reversible binding of the A49-A34.5 heterodimer could contribute to the regulation of Pol I transcription initiation and elongation.

Structural mechanism of ATP-independent transcription initiation by RNA polymerase I.

Transcription initiation by RNA Polymerase I (Pol I) depends on the Core Factor (CF) complex to recognize the upstream promoter and assemble into a Pre-Initiation Complex (PIC). Here, we solve a structure of Saccharomyces cerevisiae Pol I-CF-DNA to 3.8 Å resolution using single-particle cryo-electron microscopy. The structure reveals a bipartite architecture of Core Factor and its recognition of the promoter from -27 to -16. Core Factor's intrinsic mobility correlates well with different conformational states of the Pol I cleft, in addition to the stabilization of either Rrn7 N-terminal domain near Pol I wall or the tandem winged helix domain of A49 at a partially overlapping location. Comparison of the three states in this study with the Pol II system suggests that a ratchet motion of the Core Factor-DNA sub-complex at upstream facilitates promoter melting in an ATP-independent manner, distinct from a DNA translocase actively threading the downstream DNA in the Pol II PIC.

Cryo-negative staining reveals conformational flexibility within yeast RNA polymerase I.

The structure of the yeast DNA-dependent RNA polymerase I (RNA Pol I), prepared by cryo-negative staining, was studied by electron microscopy. A structural model of the enzyme at a resolution of 1.8 nm was determined from the analysis of isolated molecules and showed an excellent fit with the atomic structure of the RNA Pol II Delta4/7. The high signal-to-noise ratio (SNR) of the stained molecular images revealed a conformational flexibility within the image data set that could be recovered in three-dimensions after implementation of a novel strategy to sort the "open" and "closed" conformations in our heterogeneous data set. This conformational change mapped in the "wall/flap" domain of the second largest subunit (beta-like) and allows a better accessibility of the DNA-binding groove. This displacement of the wall/flap domain could play an important role in the transition between initiation and elongation state of the enzyme. Moreover, a protrusion was apparent in the cryo-negatively stained model, which was absent in the atomic structure and was not detected in previous 3D models of RNA Pol I. This structure could, however, be detected in unstained views of the enzyme obtained from frozen hydrated 2D crystals, indicating that this novel feature is not induced by the staining process. Unexpectedly, negatively charged molybdenum compounds were found to accumulate within the DNA-binding groove, which is best explained by the highly positive electrostatic potential of this region of the molecule, thus, suggesting that the stain distribution reflects the overall surface charge of the molecule.

Localization of the yeast RNA polymerase I-specific subunits.

The spatial distribution of four subunits specifically associated to the yeast DNA-dependent RNA polymerase I (RNA pol I) was studied by electron microscopy. A structural model of the native enzyme was determined by cryo-electron microscopy from isolated molecules and was compared with the atomic structure of RNA pol II Delta 4/7, which lacks the specific polypeptides. The two models were aligned and a difference map revealed four additional protein densities present in RNA pol I, which were characterized by immunolabelling. A protruding protein density named stalk was found to contain the RNA pol I-specific subunits A43 and A14. The docking with the atomic structure showed that the stalk protruded from the structure at the same site as the C-terminal domain (CTD) of the largest subunit of RNA pol II. Subunit A49 was placed on top of the clamp whereas subunit A34.5 bound at the entrance of the DNA binding cleft, where it could contact the downstream DNA. The location of the RNA pol I-specific subunits is correlated with their biological activity.

Ultrastructural analysis of nucleolar transcription in cells microinjected with 5-bromo-UTP.

In situ sites of nucleolar transcription in cells microinjected with 5-bromo-UTP (BrUTP) were visualized at an ultrastructural level. After injection the cells were maintained for 4-90 min at 37 degrees C, fixed, and embedded in LR White resin. Postembedding immunoelectron microscopic visualization with colloidal gold has been used for localizing both Br-labeled precursor incorporated into pre-rRNA and different nucleolar transcription or processing factors. This high resolution approach allowed us to identify significant signal as early as after 4-min incubation periods following BrUTP microinjection. It revealed the dense fibrillar component (DFC) as being the first nucleolar compartment labeled with anti-bromodeoxyuridine antibody. Moreover, RNA polymerase I, nucleolar transcription factor UBF, and fibrillarin were also detected almost exclusively in this same nucleolar compartment. From 30 min onward, following microinjection, Br-labeled rRNA occurred also in the granular component. The results indicate that the DFC is the site of pre-rRNA transcription and of initial steps of pre-rRNA processing. Moreover, it demonstrates that BrUTP microinjection followed by postembedding detection of Br-labeled RNA is a useful technique for high resolution studies of structure-function associations in the nucleolus.

Specific interaction and two-dimensional crystallization of histidine tagged yeast RNA polymerase I on nickel-chelating lipids.

Nickel-chelating lipid monolayers were used to generate two-dimensional crystals from yeast RNA polymerase I that was histidine-tagged on one of its subunits. The interaction of the enzyme with the spread lipid layers was found to be imidazole dependent, and the formation of two-dimensional crystals required small amounts of imidazole, probably to select the specific interaction of the engineered tag with the nickel. Two distinct preparations of RNA polymerase I tagged on different subunits yielded two different crystal forms, indicating that the position of the tag determines the crystallization process. The orientation of the enzyme in both crystal forms is correlated with the location of the tagged subunits in a three-dimensional model which shows that the tagged subunits are in contact with the lipid layer.

A shared subunit belongs to the eukaryotic core RNA polymerase.

The yeast RNA polymerase I is a multimeric complex composed of 14 distinct subunits, 5 of which are shared by the three forms of nuclear RNA polymerase. The reasons for this structural complexity are still largely unknown. Isolation of an inactive form of RNA Pol I lacking the A43, ABC23, and A14 subunits (RNA Pol I delta) allowed us to investigate the function of the shared subunit ABC23 by in vitro reconstitution experiments. Addition of recombinant ABC23 alone to the RNA Pol I delta reactivated the enzyme to up to 50% of the wild-type enzyme activity. The recombinant subunit was stably and stoichiometrically reassociated within the enzymatic complex. ABC23 was found to be required for the formation of the first phosphodiester bond, but it was not involved in DNA binding by RNA Pol I, as shown by gel retardation and surface plasmon resonance experiments, and did not recycle during transcription. Electron microscopic visualization and electrophoretic analysis of the subunit depleted and reactivated forms of the enzyme indicate that binding of ABC23 caused a major conformational change leading to a transcriptionally competent enzyme. Altogether, our results demonstrate that the ABC23 subunit is required for the structural and functional integrity of RNA Pol I and thus should be considered as part of the core enzyme.

Mouse RNA polymerase I 16-kDa subunit able to associate with 40-kDa subunit is a homolog of yeast AC19 subunit of RNA polymerases I and III.

We have previously isolated a mouse RPA40 (mRPA40) cDNA encoding the 40-kDa subunit of mouse RNA polymerase I and demonstrated that mRPA40 is a mouse homolog of the yeast subunit AC40, which is a subunit of RNA polymerases I and III, having a limited homology to bacterial RNA polymerase subunit alpha (Song, C. Z., Hanada, K., Yano, K., Maeda, Y., Yamamoto, K., and Muramatsu, M. (1994) J. Biol. Chem. 269, 26976-26981). In an extension of the study we have now cloned mouse RPA16 (mRPA16) cDNA encoding the 16-kDa subunit of mouse RNA polymerase I by a yeast two-hybrid system using mRPA40 as a bait. The deduced amino acid sequence shows 45% identity to the yeast subunit AC19 of RNA polymerases I and III, known to associate with AC40, and a local similarity to bacterial alpha subunit. We have shown that mRPA40 mutants failed to interact with mRPA16 and that neither mRPA16 nor mRPA40 can interact by itself in the yeast two-hybrid system. These results suggest that higher eukaryotic RNA polymerase I conserves two distinct alpha-related subunits that function to associate with each other in an early stage of RNA polymerase I assembly.

Three-dimensional model of yeast RNA polymerase I determined by electron microscopy of two-dimensional crystals.

Two-dimensional crystals of yeast RNA polymerase I dimers were obtained upon interaction with positively charged lipid layers. A three-dimensional surface model of the enzyme was determined by analyzing tilted crystalline areas and by taking advantage of the non-crystallographic internal symmetry of the dimer to correct for the missing viewing directions. The structure shows, at approximately 3 nm resolution, an irregularly shaped molecule 11 nm x 11 nm x 15 nm in size characterized by a 3 nm wide and 10 nm long groove which constitutes a putative DNA binding site. The overall structure is similar to the Escherichia coli holo enzyme and the yeast RNA polymerase II delta 4/7 structures. The most remarkable structural feature is a finger-shaped stalk which partially occludes the entrance of the groove and forms a 2.5 nm wide channel. We discuss the possible location of the catalytic centre and of the carboxy-terminal region of the beta-like subunit in the channel. The interference of different DNA fragments with RNA polymerase dimerization and crystallization indicates the orientation of the template in the putative DNA binding groove.

Structural study of the yeast RNA polymerase A. Electron microscopy of lipid-bound molecules and two-dimensional crystals.

Two-dimensional crystals of yeast RNA polymerase A (I) were obtained by interaction with positively charged lipid layers. The analysis of single molecular images of lipid-bound RNA polymerases showed that the enzyme was preferentially oriented by the lipid phase, which probably facilitated crystallization. Electron micrographs of the crystals revealed a rectangular unit cell 25.8 nm by 45.6 nm in size containing four RNA polymerase dimers related by P22(1)2(1) symmetry. The projection map showed, at about 2.5 nm resolution, two different views of the enzyme characterized by two bent arms, which appeared to cross at one end. These arms are likely to contain the A190 and A135 subunits and delimit a 3 to 4 nm wide groove. Additional structural features were observed and compared to the Escherichia coli enzyme.