Shielding design aspects of SR in 3 GeV ILSF.

Iranian Light Source Facility (ILSF) is an under-construction synchrotron radiation accelerator consisting of a 150 MeV linac, a booster synchrotron operating from 150 MeV to 3 GeV, and a 3 GeV storage ring that stores a maximum of 400 mA current of electrons. As the stored beam circulates, a fraction of the beam is lost due to interactions with gas molecules, interactions among beam particles, and orbital bending, which produce radiation. The bulk shielding calculation for the ILSF and the input parameters used for this analysis are discussed in this paper. The potential of skyshine neutrons to cause radiation hazards is investigated as well. Moreover, the design and shielding simulation using the FLUKA Monte Carlo code is presented for the linac beam stop and primary and scattered gas bremsstrahlung for the first optics enclosure of the ILSF spectro microscopy beamline. Our designed radiation shielding system guarantees that the annual dose in all areas around the ILSF machine does not exceed the dose limit of 1 mSv.

Semiconductor dosimetry in modern external-beam radiation therapy.

Semiconductor dosimeters are ubiquitous in modern external-beam radiation therapy. They possess key features. The response, electronically available in real time, is stable and linear with absorbed dose for given irradiation conditions; the radiation-sensitive volume can be rather small in size, while retaining mechanical strength and high sensitivity. We describe three common semiconductor dosimeters: diodes, metal-oxide-semiconductor field-effect transistors and diamonds. We discuss in detail their operation principles and applications in modern external-beam radiation therapy, primarily with megavoltage photon beams. We also explore their use in proton and heavy ion therapy, and in experimental radiotherapy techniques such as synchrotron-based micro-beam radiation therapy.

Cell Culture on Silicon Nitride Membranes and Cryopreparation for Synchrotron X-ray Fluorescence Nano-analysis.

Very little is known about the distribution of metal ions at the subcellular level. However, those chemical elements have essential regulatory functions and their disturbed homeostasis is involved in various diseases. State-of-the-art synchrotron X-ray fluorescence nanoprobes provide the required sensitivity and spatial resolution to elucidate the two-dimensional (2D) and three-dimensional (3D) distribution and concentration of metals inside entire cells at the organelle level. This opens new exciting scientific fields of investigation on the role of metals in the physiopathology of the cell. The cellular preparation is a key and often complex procedure, particularly for basic analysis. Although X-ray fluorescence techniques are now widespread and various preparation methods have been used, very few studies have investigated the preservation of the elemental content of cells at best, and no stepwise detailed protocol for the cryopreparation of adherent cells for X-ray fluorescence nanoprobes has been released so far. This is a description of a protocol that provides the stepwise cellular preparation for fast cryofixation to enable synchrotron X-ray fluorescence nano-analysis of cells in a frozen hydrated state when a cryogenic environment and transfer is available. In case nano-analysis has to be performed at room temperature, an additional procedure for freeze-drying the cryofixed adherent cellular preparation is provided. The proposed protocols have been successfully used in previous works, most recently in studying the 2D and 3D intracellular distribution of an organometallic compound in breast cancer cells.

Visualization of Failure and the Associated Grain-Scale Mechanical Behavior of Granular Soils under Shear using Synchrotron X-Ray Micro-Tomography.

The rapid development of X-ray imaging techniques with image processing and analysis skills has enabled the acquisition of CT images of granular soils with high-spatial resolutions. Based on such CT images, grain-scale mechanical behavior such as particle kinematics (i.e., particle translations and particle rotations), strain localization and inter-particle contact evolution of granular soils can be quantitatively investigated. However, this is inaccessible using conventional experimental methods. This study demonstrates the exploration of the grain-scale mechanical behavior of a granular soil sample under triaxial compression using synchrotron X-ray micro-tomography (µCT). With this method, a specially fabricated miniature loading apparatus is used to apply confining and axial stresses to the sample during the triaxial test. The apparatus is fitted into a synchrotron X-ray tomography setup so that high-spatial resolution CT images of the sample can be collected at different loading stages of the test without any disturbance to the sample. With the capability of extracting information at the macro scale (e.g., sample boundary stresses and strains from the triaxial apparatus setup) and the grain scale (e.g., grain movements and contact interactions from the CT images), this procedure provides an effective methodology to investigate the multi-scale mechanics of granular soils.

Optimization of a general-purpose, actively scanned proton beamline for ocular treatments: Geant4 simulations.

The Italian National Center for Hadrontherapy (CNAO, Centro Nazionale di Adroterapia Oncologica), a synchrotron-based hospital facility, started the treatment of patients within selected clinical trials in late 2011 and 2012 with actively scanned proton and carbon ion beams, respectively. The activation of a new clinical protocol for the irradiation of uveal melanoma using the existing general-purpose proton beamline is foreseen for late 2014. Beam characteristics and patient treatment setup need to be tuned to meet the specific requirements for such a type of treatment technique. The aim of this study is to optimize the CNAO transport beamline by adding passive components and minimizing air gap to achieve the optimal conditions for ocular tumor irradiation. The CNAO setup with the active and passive components along the transport beamline, as well as a human eye-modeled detector also including a realistic target volume, were simulated using the Monte Carlo Geant4 toolkit. The strong reduction of the air gap between the nozzle and patient skin, as well as the insertion of a range shifter plus a patient-specific brass collimator at a short distance from the eye, were found to be effective tools to be implemented. In perspective, this simulation toolkit could also be used as a benchmark for future developments and testing purposes on commercial treatment planning systems.

Mid-infrared spectroscopic assessment of nanotoxicity in gram-negative vs. gram-positive bacteria.

Nanoparticles appear to induce toxic effects through a variety of mechanisms including generation of reactive oxygen species (ROS), physical contact with the cell membrane and indirect catalysis due to remnants from manufacture. The development and subsequent increasing usage of nanomaterials has highlighted a growing need to characterize and assess the toxicity of nanoparticles, particularly those that may have detrimental health effects such as carbon-based nanomaterials (CBNs). Due to interactions of nanoparticles with some reagents, many traditional toxicity tests are unsuitable for use with CBNs. Infrared (IR) spectroscopy is a non-destructive, high throughput technique, which is unhindered by such problems. We explored the application of IR spectroscopy to investigate the effects of CBNs on Gram-negative (Pseudomonas fluorescens) and Gram-positive (Mycobacterium vanbaalenii PYR-1) bacteria. Two types of IR spectroscopy were compared: attenuated total reflection Fourier-transform infrared (ATR-FTIR) and synchrotron radiation-based FTIR (SR-FTIR) spectroscopy. This showed that Gram-positive and Gram-negative bacteria exhibit differing alterations when exposed to CBNs. Gram-positive bacteria appear more resistant to these agents and this may be due to the protection afforded by their more sturdy cell wall. Markers of exposure also vary according to Gram status; Amide II was consistently altered in Gram-negative bacteria and carbohydrate altered in Gram-positive bacteria. ATR-FTIR and SR-FTIR spectroscopy could both be applied to extract biochemical alterations induced by each CBN that were consistent across the two bacterial species; these may represent potential biomarkers of nanoparticle-induced alterations. Vibrational spectroscopy approaches may provide a novel means of fingerprinting the effects of CBNs in target cells.

Reference dosimetry at the Australian Synchrotron's imaging and medical beamline using free-air ionization chamber measurements and theoretical predictions of air kerma rate and half value layer.

PURPOSE: Novel, preclinical radiotherapy modalities are being developed at synchrotrons around the world, most notably stereotactic synchrotron radiation therapy and microbeam radiotherapy at the European Synchrotron Radiation Facility in Grenoble, France. The imaging and medical beamline (IMBL) at the Australian Synchrotron has recently become available for preclinical radiotherapy and imaging research with clinical trials, a distinct possibility in the coming years. The aim of this present study was to accurately characterize the synchrotron-generated x-ray beam for the purposes of air kerma-based absolute dosimetry. METHODS: The authors used a theoretical model of the energy spectrum from the wiggler source and validated this model by comparing the transmission through copper absorbers (0.1-3.0 mm) against real measurements conducted at the beamline. The authors used a low energy free air ionization chamber (LEFAC) from the Australian Radiation Protection and Nuclear Safety Agency and a commercially available free air chamber (ADC-105) for the measurements. The dimensions of these two chambers are different from one another requiring careful consideration of correction factors. RESULTS: Measured and calculated half value layer (HVL) and air kerma rates differed by less than 3% for the LEFAC when the ion chamber readings were corrected for electron energy loss and ion recombination. The agreement between measured and predicted air kerma rates was less satisfactory for the ADC-105 chamber, however. The LEFAC and ADC measurements produced a first half value layer of 0.405 ± 0.015 and 0.412 ± 0.016 mm Cu, respectively, compared to the theoretical prediction of 0.427 ± 0.012 mm Cu. The theoretical model based upon a spectrum calculator derived a mean beam energy of 61.4 keV with a first half value layer of approximately 30 mm in water. CONCLUSIONS: The authors showed in this study their ability to verify the predicted air kerma rate and x-ray attenuation curve on the IMBL using a simple experimental method, namely, HVL measurements. The HVL measurements strongly supports the x-ray beam spectrum, which in turn has a profound effect on x-ray dosimetry.

Synchrotron radiation in cancer treatments and diagnostics: an overview

During the last 30 years many groups have carried out experiments and trials to develop new imaging and radiotherapy techniques in oncology, based on the use of synchrotron X-rays. There are several synchrotron biomedical stations around the world, which offer an excellent platform to improve either the imaging diagnosis or radiotherapy treatment for different tumour types. In the coming months the first radiotherapy clinical trials will be seen at the Biomedical Beamline at the ESRF synchrotron in Grenoble (France). In this article we highlight the results of some of the techniques and strategies that have been developed at different biomedical synchrotron stations (AU)

[Radiobiological features of anti-cancer treatments involving synchrotron radiation: outcome and perspectives]. / Aspects radiobiologiques des traitements anticancéreux par rayonnement synchrotron: bilan et perspectives.

Each technological development of radiotherapy is an example of interaction between physicians and physicists. In the past, it was the case for the first X-rays generators, betatrons and particle accelerators. To date, this is the case for Cyberknives and intensity modulation radiotherapy. In the future, this will be the case for proton- and hadron-therapy. However, in a general tendency of favouring higher radiation energies, leaving the 250kV orthovoltage irradiators and preferring accelerators delivering some tens MeV to reach the deepest tumours, how to consider the anti-cancer applications of synchrotron radiation that provides X-rays in the 10-100keV "only"? Since the first approaches developed in the USA in seventies until the last preclinical trials performed at the European Synchrotron Radiation Facility of Grenoble, the radiobiological features of the chemoradiotherapy involving synchrotron radiation will be described and analysed throughout a transversal view considering physicochemical bases, biomolecular and cellular mechanisms and results from the preclinical trials in order to provide a general outcome and some eventual transfer perspectives.

Characterization of wax as a potential diffraction intensity standard for macromolecular crystallography beamlines.

A number of commercially available waxes in the form of thin disc samples have been investigated as possible diffraction intensity standards for macromolecular crystallography synchrotron beamlines. Synchrotron X-ray powder diffraction measurements show that beeswax offers the best performance of these waxes owing to its polycrystallinity. Crystallographic lattice parameters and diffraction intensities were examined between 281 and 309 K, and show stable and predictable thermal behaviour. Using an X-ray beam of known incident flux at lambda = 1 A, the diffraction power of two strong Bragg reflections for beeswax were quantified as a function of sample thickness and normalized to 10(10) photons s(-1). To demonstrate its feasibility as a diffraction intensity standard, test measurements were then performed on a new third-generation macromolecular crystallography synchrotron beamline.

Phosphorus L(2,3)-edge XANES: overview of reference compounds.

Synchrotron-based X-ray absorption near-edge structure (XANES) spectroscopy is becoming an increasingly used tool for the element speciation in complex samples. For phosphorus (P) almost all XANES measurements have been carried out at the K-edge. The small number of distinctive features at the P K-edge makes in some cases the identification of different P forms difficult or impossible. As indicated by a few previous studies, the P L(2,3)-edge spectra were richer in spectral features than those of the P K-edge. However, experimentally consistent spectra of a wide range of reference compounds have not been published so far. In this study a library of spectral features is presented for a number of mineral P, organic P and P-bearing minerals for fingerprinting identification. Furthermore, the effect of radiation damage is shown for three compounds and measures are proposed to reduce it. The spectra library provided lays a basis for the identification of individual P forms in samples of unknown composition for a variety of scientific areas.

Strategies for data collection and calibration with a pinhole-geometry SAXS instrument on a synchrotron beamline.

Undulator X-ray sources on third-generation synchrotrons have pushed small-angle X-ray scattering (SAXS) to the forefront of techniques in nanoscience and technology. With higher X-ray fluxes and improved focusing, it is usually the scattered intensity detector that places the most serious limitations on the overall capabilities of the instrument. Incorporating relatively simple components like point detectors, scattering standards, masking filters and in-line sample visualization into the flight tube of a pinhole-geometry SAXS camera can do much to mitigate these limitations. How these enhancements can be incorporated into routine data collection is demonstrated on the ChemMatCARS SAXS instrument, which utilizes pinhole geometry with an undulator insertion device at sector 15 of the Advanced Photon Source. In addition, with an X-ray energy range of 6-32 keV (2.0-0.4 A) and an energy resolution of 10(-4) DeltaE/E, this instrument can measure anomalous SAXS over a wide variety of atom species, with reliable normalization of scattered data.

Comparison of synchrotron radiation angiography with conventional angiography for the diagnosis of in-stent restenosis after percutaneous transluminal coronary angioplasty.

AIMS: Synchrotron radiation angiography (SRA) is a novel tool for minimally invasive coronary artery imaging. The method uses subtraction of two images produced at energies bracketing the iodine K-edge after intravenous infusion of iodinated contrast agent. We investigated the accuracy of SRA for detecting in-stent restenosis (ISR). METHODS AND RESULTS: We recruited 57 men, 4-6 months after successful PTCA. We visualized the right coronary artery (RCA) in 27 patients with 36 stented segments [12 segments with ISR>50% by quantitative coronary angiography (QCA)], and the left anterior descending artery (LAD) in 30 patients with 37 stented segments (10 ISR). SRA and QCA were performed within 2 days of each other. Two experienced observers unaware of QCA data evaluated the SRA results. Image quality was good or excellent in most patients. Global sensitivity was 64%, specificity was 95%, and positive and negative predictive values were approximately 85%. Inter-observer kappa concordance coefficient was 0.86. False negatives involved short eccentric lesions and superimposed segments, most frequently of the LAD. False positives occurred in intermediate stenoses slightly overestimated by SRA. CONCLUSION: In men, this minimally invasive approach, using small radiation doses, detects significant ISR in the RCA, but the LAD poses difficulties because of superimposition with others structures.