Process Optimization for the Continuous Production of a Gastroretentive Dosage Form Based on Melt Foaming.

Several drugs have poor oral bioavailability due to low or incomplete absorption which is affected by various effects as pH, motility of GI, and enzyme activity. The gastroretentive drug delivery systems are able to deal with these problems by prolonging the gastric residence time, while increasing the therapeutic efficacy of drugs. Previously, we developed a novel technology to foam hot and molten dispersions on atmospheric pressure by a batch-type in-house apparatus. Our aim was to upgrade this technology by a new continuous lab-scale apparatus and confirm that our formulations are gastroretentive. At first, we designed and built the apparatus and continuous production was optimized using a Box-Behnken experimental design. Then, we formulated barium sulfate-loaded samples with the optimal production parameters, which was suitable for in vivo imaging analysis. In vitro study proved the low density, namely 507 mg/cm3, and the microCT record showed high porosity with 40 µm average size of bubbles in the molten suspension. The BaSO4-loaded samples showed hard structure at room temperature and during the wetting test, the complete wetting was detected after 120 min. During the in vivo study, the X-ray taken showed the retention of the formulation in the rat stomach after 2 h. We can conclude that with our device low-density floating formulations were prepared with prolonged gastric residence time. This study provides a promising platform for marketed active ingredients with low bioavailability.

Synthesis, characterization and anti-bacterial activities of pure and Co-doped BaSO4 nanoparticles via chemical precipitation route.

In the present study, we reported that the synthesis and characterization of pure and diverse mole Co-doped BaSO4 nanoparticles have been synthesized by chemical precipitation technique. X-ray diffraction analysis (XRD) brought out the information about the synthesized products is orthorhombic structure and highly crystalline in nature. The average grain size of the samples was determined by using the Debye-Scherer's equation. The existence of functional groups and band area of the samples were confirmed by Fourier transform infrared (FTIR) spectroscopy. The direct and indirect band gap energy of pure and doped samples was carried out using UV-VIS-DRS. The surface micrograph, morphological distribution and elemental compositions of the synthesized products were assessed by scanning electron microscopy (SEM) and Energy dispersive X-ray (EDS). Thermo gravimetric and differential thermal analysis (TG-DTA) techniques were analyzed thermal behaviour of pure and Co-doped samples. Finally, antibacterial activities found the Gram-positive and Gram-negative bacteria are more active in transporter, dehydrogenize and periplasmic enzymatic activities of pure and doped samples.

Synthesis and characterisation of BaSo4:Eu thermoluminescence phosphor.

Polycrystalline powder samples of BaSO(4) doped with Eu(2+) were prepared by solid-state reaction in different reducing atmospheres. Photoluminescence (PL), thermoluminescence (TL), TL kinetic and dosimetric studies have been carried out in this phosphor. The TL glow curve of BaSO(4):Eu(2+) showed only a single peak at 513 K unlike other phosphors and the TL intensity is about three to four times higher than that of CaSO(4):Dy, which is currently used as the radiation dosemeter for personnel monitoring in India. The TL dose response of the phosphor was found to be linear up to the dose range of 10(3) Gy beyond which saturation sets in. PL and TL spectra showed the characteristic emission of Eu(2+) ion. The TL parameters such as trap depth (E) or the energy required to release the electron or hole from the trap, frequency factor (s) and the order of kinetics (b) are determined by different methods such as isothermal decay, initial rise and variable heating rate.

Hierarchically nanostructured barium sulfate fibers.

BaSO(4) nanostructures with controlled morphologies were successfully produced via one-step process through precipitation of BaSO(4) in aqueous and organic media. The synthesis is carried out by mixing solutions of BaCl(2) and Na(2)SO(4) in presence of EDTA (disodium ethylenediaminetetraacetic acid) at room temperature. The influence of the reaction conditions such as initial reactants concentration, pH, EDTA/[Ba(2+)] ratio and aging on the BaSO(4) nanoparticles organization is studied. Using EDTA in aqueous media, spherical secondary particles of 500 nm diameter are obtained, which are formed by 4 nm size primary particles. With dimethyl sulfoxide and small amounts of water (5%) and EDTA, the aging process allows the production of long homogeneous fibers, related to hierarchical organization of BaSO(4) nanoparticles. Direct observation of self-assembling of primary particles by HRTEM allows proposing a mechanism for fiber formation, which is based on multipolar attractions that lead to a brick-by-brick organization along a preferential orientation. Results evidence the role of EDTA as controlling agent of the morphology and primary and secondary mean particle size.