Assessment of the Reliability of the Fiberoptic Endoscopic Evaluation of Swallowing as an Outcome Measure in Patients Undergoing Revision Anterior Cervical Discectomy and Fusion.

BACKGROUND: Dysphagia is one of the most common complications of anterior cervical spine surgery, and there is a need to establish that the means of testing for it are reliable and valid. The objective of this study was to measure observer variability of the fiberoptic endoscopic evaluation of swallowing (FEES) test, specifically when used for evaluation of dysphagia in patients undergoing revisionary anterior cervical decompression and fusion (ACDF). METHODS: Images from patients undergoing revision ACDF at a single institution were collected from May 1, 2010, through July 1, 2014. Two senior certified speech pathologists independently evaluated the swallowing function of patients preoperatively and at 2 weeks postoperatively. Their numeric evaluations of the Rosenbeck Penetration-Aspiration Scale and the Swallowing Performance Scale during the FEES were then compared for interrater reliability. RESULTS: Positive agreement between raters was 94% for the preoperative Penetration-Aspiration Scale (prevalence-adjusted bias-adjusted κ, 0.77). The postoperative Penetration-Aspiration Scale showed reliability coefficients for κ, Kendall's W, and intraclass correlation coefficient (ICC) of 0.34 (fair agreement), 0.70 (extremely strong agreement), and 0.35 (poor agreement), respectively. The preoperative Swallowing Performance Scale showed strong agreement, with a Kendall's W coefficient of 0.68, and fair reliability, with an ICC of 0.40. The postoperative Swallowing Performance Scale indicated extremely strong agreement between raters, with a Kendall's W of 0.82, and good agreement, with an ICC of 0.53. CONCLUSIONS: The FEES test appears to be a reliable assessor of dysphagia in patients undergoing ACDF and may be a useful measure for exploring outcomes in this population.

Next-Generation Single-Use Ureteroscopes: An In Vitro Comparison.

INTRODUCTION: Single-use ureteroscopes have been gaining popularity in recent years. We compare the optics, deflection, and irrigation flow of two novel single-use flexible ureteroscopes-the YC-FR-A and the NeoFlex-with contemporary reusable and single-use flexible ureteroscopes. METHODS: Five flexible ureteroscopes, YC-FR-A (YouCare Tech, China), NeoFlex (Neoscope, Inc., USA), LithoVue (Boston Scientific, USA), Flex-Xc (Karl Storz, Germany), and Cobra (Richard Wolf, Germany), were assessed in vitro for image resolution, distortion, field of view, depth of field, color representation, and grayscale imaging. Ureteroscope deflection and irrigation were also compared. RESULTS: The YC-FR-A showed a resolution of 5.04 lines/mm and 4.3% image distortion. NeoFlex showed a resolution of 17.9 lines/mm and 14.0% image distortion. No substantial difference was demonstrated regarding the other optic characteristics between the two. Across all tested ureteroscopes, single-use or reusable, the digital scopes performed best with regard to optics. The YC-FR-A had the greatest deflection at baseline, but lacks two-way deflection. The NeoFlex had comparable deflection at baseline to reusable devices. Both ureteroscopes had substantial loss of deflection with instruments in the working channel. The YC-FR-A had the greatest irrigation rate. The NeoFlex has comparable irrigation to contemporary ureteroscopes. CONCLUSIONS: The YouCare single-use fiberoptic flexible ureteroscope and NeoFlex single-use digital flexible ureteroscope perform comparably to current reusable ureteroscopes, possibly making each a viable alternative in the future. Newer YouCare single-use flexible ureteroscopes with a digital platform and two-way deflection may be more competitive, while the NeoFlex devices are undergoing rapid improvement as well. Further testing is necessary to validate the clinical performance and utility of these ureteroscopes, given the wide variety of single-use devices under development.

Fiberoptic Contact-Force Sensing Electrophysiological Catheters: How Precise Is the Technology?

BACKGROUND: Contact-force (CF) sensing catheters are increasingly used in electrophysiological procedures due to their efficacy and safety profile. As data about the accuracy of fiberoptic CF technology are scarce, we sought to quantify it using in vitro experiments. METHODS AND RESULTS: A force sensor was built with a flexible membrane to allow exact reference force measurements for each set of experiments. A TactiCath Quartz (TCQ) ablation catheter was brought in contact with the force sensor membrane in order to compare the TCQ force measurements to sensor reference force measurements. Measurements were performed at different tip angles (0°/perpendicular contact, 45°, 90°/parallel contact), with fluid irrigation, different degrees of catheter deflection, and using a sheath. The accuracy of the TCQ force measurements was 0.9 ± 0.9 g (0°), 0.8 ± 0.8 g (45°) and 1.2 ± 1.3 g (90°), 0.8 ± 0.7 g (irrigation), 0.8 ± 0.8 g (deflection), and 0.8 ± 0.9 g (sheath); this was not significantly different among all experimental conditions. The precision was ≤3.8%. CONCLUSION: CF measurements using a fiberoptic sensing technology show a high level of accuracy and precision, without being significantly influenced by tip angle, fluid irrigation, catheter deflection or use of a sheath.

High-resolution microendoscopy: a point-of-care diagnostic for cervical dysplasia in low-resource settings.

Cervical cancer is the third leading cause of cancer-related death among women in low-to-middle income countries. Pap testing and pathological services are difficult to implement under these settings. Alternative techniques for the diagnosis of cervical precancer in these settings are needed to reduce the burden of the disease. The objective of this study was to evaluate the diagnostic accuracy of a low-cost, high-resolution microendoscope imaging system in identifying precancerous lesions of the cervix in vivo. A retrospective study of 59 patients undergoing colposcopy for an abnormal Pap test was performed at Hospital de Câncer de Barretos in Brazil. All patients underwent colposcopy as per standard of care, and acetowhite lesions were recorded. High-resolution microendoscopy (HRME) images were obtained from one colposcopically normal region and from all lesions observed on colposcopy. Biopsies of abnormal areas were obtained and reviewed by three independent, blinded pathologists and compared with HRME findings. The mean nuclear area and the median nuclear eccentricity were calculated from HRME images acquired from each site. A diagnostic algorithm to distinguish histopathologically diagnosed cervical intraepithelial neoplasias of grade 2 or more severe lesions (high grade) from less severe lesions (low grade) was developed using these parameters. A test of trend was used to analyze the relationship between HRME positivity and severity of histopathogical diagnosis. Fisher's exact test was used to analyze differences in HRME positivity between high-grade and low-grade lesions. Evaluable images were obtained from 108 of 143 discrete sites. Of these, 71 sites were colposcopically normal or low grade according to histopathology and 37 were diagnosed as high grade on the basis of histopathology. Using the mean nuclear area and the median nuclear eccentricity, HRME images from 59 colposcopically abnormal sites were classified as high grade or low grade with 92% sensitivity and 77% specificity compared with histopathological findings. Increasing HRME positivity showed a significant trend with increasing severity of diagnosis (Ptrend<0.001). We found a strong association (P<0.001) between HRME positivity and a histopathological diagnosis of cervical intraepithelial neoplasia of grade 2 or higher. HRME demonstrated an accurate in-situ diagnosis of high-grade dysplasia. In low-resource settings in which colposcopy and histopathology services are severely limited or unavailable, HRME may provide a low-cost, accurate method for diagnosis of cervical precancer without the need for biopsy, allowing for a single 'screen-and-treat' approach.

Evaluation of the Double-Lumen Tube Vivasight-DL (DLT-ETView): A Prospective Single-Center Study.

OBJECTIVES: VivaSight-DL (DLT-ETView) is a single-use double-lumen tube (DLT) with an integrated camera visualizing the carina continuously, which could reduce the need for a routine fiberoptic bronchoscopy. The objective of this study was to evaluate its rate of correct positioning. DESIGN: A prospective, observational study. SETTING: A university hospital. PARTICIPANTS: 170 patients undergoing a thoracic surgical procedure. INTERVENTIONS: Selective left bronchus intubation. MEASUREMENTS AND MAIN RESULTS: The main outcome measure was a double criteria assessed by fiberoptic bronchoscopy: the bronchial cuff in the left main bronchus and end of the bronchial lumen upstream of the lobar bifurcation. Between September 2013 and April 2014, 84 patients of the planned 170 were included. Seven patients were excluded: 3 for failed intubation, 3 for protocol violation, and 1 because the DLT melted before insertion. The study was terminated after this event. Seventy-six patients (99%) had correct positioning, with a median margin of safety of 20 mm (interquartile range: 15-27) in the surgical position. In 40 patients (53%), malpositioning required mobilization of the tube at least once intraoperatively. CONCLUSIONS: The tube was well positioned in almost all patients. Continuous visualization of the carina is a major improvement for patient care as intraoperative displacement can be diagnosed immediately and corrected. However, an incident induced premature ending of the study.

Recent Improvement of Medical Optical Fibre Pressure and Temperature Sensors.

This investigation describes a detailed analysis of the fabrication and testing of optical fibre pressure and temperature sensors (OFPTS). The optical sensor of this research is based on an extrinsic Fabry-Perot interferometer (EFPI) with integrated fibre Bragg grating (FBG) for simultaneous pressure and temperature measurements. The sensor is fabricated exclusively in glass and with a small diameter of 0.2 mm, making it suitable for volume-restricted bio-medical applications. Diaphragm shrinking techniques based on polishing, hydrofluoric (HF) acid and femtosecond (FS) laser micro-machining are described and analysed. The presented sensors were examined carefully and demonstrated a pressure sensitivity in the range of sp = 2-10 nm/kPa and a resolution of better than ΔP = 10 Pa protect (0.1 cm H2O). A static pressure test in 38 cm H2O shows no drift of the sensor in a six-day period. Additionally, a dynamic pressure analysis demonstrated that the OFPTS never exceeded a drift of more than 130 Pa (1.3 cm H2O) in a 12-h measurement, carried out in a cardiovascular simulator. The temperature sensitivity is given by k = 10.7 pm/K, which results in a temperature resolution of better than ΔT = 0.1 K. Since the temperature sensing element is placed close to the pressure sensing element, the pressure sensor is insensitive to temperature changes.

The Reliability of the Reflux Finding Score Among General Otolaryngologists.

BACKGROUND: The reflux finding score (RFS) is a validated clinical severity scale for findings of laryngopharyngeal reflux (LPR) on fiberoptic laryngoscopy. To our knowledge, there have been no studies to determine whether severity of patient symptoms influence the RFS; in addition, the reliability of the RFS has not been tested for general otolaryngologists. OBJECTIVES: The objectives of this study were (1) to determine whether the RFS for LPR is influenced by symptoms of reflux and (2) to determine the inter-rater reliability for general otolaryngologists in diagnosing LPR using the RFS. METHODS: Ten general otolaryngologists were selected to participate. Participants were asked to complete an Internet survey consisting of flexible endoscopic videos of larynges with varying physical findings of reflux and grade the severity of reflux using the RFS. The videos were randomly shown with and without accompanying patient symptoms. RESULTS: Our data suggest that patient symptoms influence the RFS. Inter-rater reliability for general otolaryngologists using the RFS is fair. CONCLUSIONS: Among general otolaryngologists in our study, the reliability and objectivity of the RFS in diagnosing reflux cannot be demonstrated.

Multivariate reference technique for quantitative analysis of fiber-optic tissue Raman spectroscopy.

We report a novel method making use of multivariate reference signals of fused silica and sapphire Raman signals generated from a ball-lens fiber-optic Raman probe for quantitative analysis of in vivo tissue Raman measurements in real time. Partial least-squares (PLS) regression modeling is applied to extract the characteristic internal reference Raman signals (e.g., shoulder of the prominent fused silica boson peak (~130 cm(-1)); distinct sapphire ball-lens peaks (380, 417, 646, and 751 cm(-1))) from the ball-lens fiber-optic Raman probe for quantitative analysis of fiber-optic Raman spectroscopy. To evaluate the analytical value of this novel multivariate reference technique, a rapid Raman spectroscopy system coupled with a ball-lens fiber-optic Raman probe is used for in vivo oral tissue Raman measurements (n = 25 subjects) under 785 nm laser excitation powers ranging from 5 to 65 mW. An accurate linear relationship (R(2) = 0.981) with a root-mean-square error of cross validation (RMSECV) of 2.5 mW can be obtained for predicting the laser excitation power changes based on a leave-one-subject-out cross-validation, which is superior to the normal univariate reference method (RMSE = 6.2 mW). A root-mean-square error of prediction (RMSEP) of 2.4 mW (R(2) = 0.985) can also be achieved for laser power prediction in real time when we applied the multivariate method independently on the five new subjects (n = 166 spectra). We further apply the multivariate reference technique for quantitative analysis of gelatin tissue phantoms that gives rise to an RMSEP of ~2.0% (R(2) = 0.998) independent of laser excitation power variations. This work demonstrates that multivariate reference technique can be advantageously used to monitor and correct the variations of laser excitation power and fiber coupling efficiency in situ for standardizing the tissue Raman intensity to realize quantitative analysis of tissue Raman measurements in vivo, which is particularly appealing in challenging Raman endoscopic applications.

Investigation on dynamic calibration for an optical-fiber solids concentration probe in gas-solid two-phase flows.

This paper presents a review and analysis of the research that has been carried out on dynamic calibration for optical-fiber solids concentration probes. An introduction to the optical-fiber solids concentration probe was given. Different calibration methods of optical-fiber solids concentration probes reported in the literature were reviewed. In addition, a reflection-type optical-fiber solids concentration probe was uniquely calibrated at nearly full range of the solids concentration from 0 to packed bed concentration. The effects of particle properties (particle size, sphericity and color) on the calibration results were comprehensively investigated. The results show that the output voltage has a tendency to increase with the decreasing particle size, and the effect of particle color on calibration result is more predominant than that of sphericity.

Evaluation of early mini-bronchoalveolar lavage in the diagnosis of health care-associated pneumonia: a prospective study.

INTRODUCTION: Health care-associated pneumonia (HCAP) has been proposed as a new category of respiratory infection to identify patients at risk of multidrug-resistant (MDR) pathogens. The American Thoracic Society's recommendation for HCAP treatment is to use broad-spectrum and multiple antibiotics. However, this strategy may be economically expensive and promote antimicrobial resistance when a multisensitive pathogen is not identified. METHODS: We prospectively included all patients presenting with HCAP in the emergency department. Blood cultures and fiberoptic bronchoscope-guided distal protected small volume bronchoalveolar lavage (FODP mini-BAL) were performed in each patient. Empirical antibiotic therapy was adapted when microbiological findings were available. The primary objective was to assess whether FODP mini-BAL is more efficient than blood cultures in identifying pathogens with the ratio of identification between both techniques as principal criteria. RESULTS: We included 54 patients with HCAP. Pathogens were identified in 46.3% of cases using mini-BAL and in 11.1% of cases using blood cultures (P <0.01). When the patient did not receive antibiotic therapy before the procedure, pathogens were identified in 72.6% of cases using mini-BAL and in 9.5% of cases using blood cultures (P <0.01). We noted multidrug-resistant pathogens in 16% of cases. All bronchoscopic procedures could be performed in patients without complications. CONCLUSIONS: FODP mini-BAL was more efficient than blood cultures for identifying pathogens in patients presenting with HCAP. When bacteriological identification was obtained, antibiotic therapy was adapted in 100% of cases.See related letter by Sircar et al.,http://ccforum.com/content/17/2/428.

High variability and low irradiance of phototherapy devices in Dutch NICUs.

OBJECTIVE: To evaluate phototherapy practices by measuring the irradiance levels of phototherapy (PT) devices. DESIGN: Prospective study. SETTING: Tertiary neonatal intensive care units. PATIENTS: None. INTERVENTIONS: Irradiance levels of PT devices used in the 10 Dutch Neonatal Intensive Care Units (NICUs) were measured according to the local PT practice patterns. The irradiance levels of all overhead and fibre-optic PT devices were measured with a radiometer using an infant silhouette model. RESULTS: Eight different PT devices were used in the 10 NICUs; five were overhead devices and three fibre-optic pads. The median (range) irradiance level for overhead PT devices was 9.7 (4.3-32.6) µW/cm(2)/nm and for fibre-optic pads 6.8 (0.8-15.6) µW/cm(2)/nm. Approximately 50% of PT devices failed to meet the minimal recommended irradiance level of 10 µW/cm(2)/nm. Maximal irradiance levels for overhead PT spot lights were inversely related to the distance between device and infant model (R2=0.33). The distances ranged from 37 cm to 65 cm. CONCLUSIONS: PT devices in the Dutch NICUs show considerable variability with often too low irradiance levels. These results indicate that suboptimal PT is frequently applied and may even be ineffective towards reducing total serum bilirubin levels. These results underline the need for greater awareness among all healthcare workers towards the requirements for effective PT including measurements of irradiance and distance.

Correcting for spatial-resolution degradation mechanisms in OFDR via inline auxiliary points.

The spatial resolution of OFDR is normally degraded by the laser phase noise, deviations from linear frequency scan and acoustic noise in the fibers. A method for mitigating these degradation mechanisms, without using an auxiliary interferometer, via inline auxiliary points, is presented and demonstrated experimentally. Auxiliary points are points that are a priori known to have (spatial) impulse reflectivities. Their responses are used for compensating the phase deviations that degrade the response of points that are further away from the source.

SNAP: fabrication of long coupled microresonator chains with sub-angstrom precision.

Based on the recently-introduced Surface Nanoscale Axial Photonics (SNAP) platform, we demonstrate a chain of 30 coupled SNAP microresonators spaced by 50 micron along an optical fiber, which is fabricated with the precision of 0.7 angstrom and a standard deviation of 0.12 angstrom in effective microresonator radius. To the best of our knowledge, this result surpasses those achieved in other super-low-loss photonic technologies developed to date by two orders of magnitude. The chain exhibits bandgaps in both the discrete and continuous spectrum in excellent agreement with theory. The developed method enables robust fabrication of SNAP devices with sub-angstrom precision.

Enhancing long-term stability of the optoelectronic oscillator with a probe-injected fiber delay monitoring mechanism.

Optoelectronic oscillators (OEOs), based on optical fiber loops to act as a high-Q cavity, are capable of generating stable radio-frequencies (RF). The long-term frequency stability of the OEO is then limited by the cavity variation that is mainly induced by temperature sensitivity of the optical fiber. In order to actively stabilize the OEO cavity, we employ the technique of RF transfer over optical fibers. We propose and experimentally demonstrate a dual-loop-OEO scheme to enhance the long-term stability with an injected probe signal to monitor the phase variation in the fiber loops. The experimental results show that the resulting spread-spectrum signal is useful in monitoring the fiber delay without observable interference. The relationships between the measured frequency and the monitored delay are theoretically and numerically discussed. We also estimate the long-term stability of the proposed OEO scheme with the cavity phase correction. The corrected result shows the long-term frequency stability of the proposed OEO is within 8.4×10(-8) at one day.

Dissemination of an optical frequency comb over fiber with 3 × 10(-18) fractional accuracy.

We demonstrate that the structure of an optical frequency comb transferred over several km of fiber can be preserved at a level compatible with the best optical frequency references currently available. Using an optical phase detection technique we measure the noise introduced by the fiber link and suppress it by stabilizing the optical path length. The measured fractional frequency stability of the transferred optical modes is 2 × 10(-18) at a few thousand seconds and the mode spacing stability after optical-microwave conversion is better than 4 × 10(-17) over the same time scale.

Performance of large aperture tapered fiber phase conjugate mirror with high pulse energy and 1-kHz repetition rate.

A large aperture fused silica tapered fiber phase conjugate mirror is presented with a maximum 70% stimulated Brillouin scattering (SBS) reflectivity, which is obtained with 1 kHz repetition rate, 15 ns pulse width and 38 mJ input pulse energy. To the best of our knowledge, this is the highest SBS reflectivity ever reported by using optical fiber as a phase conjugate mirror for such high pulse repetition rate (1 kHz) and several tens of millijoule (mJ) input pulse energy. The influences of fiber end surface quality and pump pulse widths on SBS reflectivity are investigated experimentally. The results show that finer fiber end surface quality and longer input pulse widths are preferred for obtaining higher SBS reflectivity with higher input pulse energy. Double passing amplification experiments are also performed. 52 mJ pulse energy is achieved at 1 kHz repetition rate, with a reflected SBS pulse width of 1.5 ns and a M(2) factor of 2.3. The corresponding peak power reaches 34.6 MW. Obvious beam quality improvement is observed.

Ellipsometry with randomly varying polarization states.

We show that, under the right conditions, one can make highly accurate polarization-based measurements without knowing the absolute polarization state of the probing light field. It is shown that light, passed through a randomly varying birefringent material has a well-defined orbit on the Poincar sphere, which we term a generalized polarization state, that is preserved. Changes to the generalized polarization state can then be used in place of the absolute polarization states that make up the generalized state, to measure the change in polarization due to a sample under investigation. We illustrate the usefulness of this analysis approach by demonstrating fiber-based ellipsometry, where the polarization state of the probe light is unknown, and, yet, the ellipsometric angles of the investigated sample (Ψ and Δ) are obtained with an accuracy comparable to that of conventional ellipsometry instruments by measuring changes to the generalized polarization state.

Characterization of a fiber-optic displacement sensor for measurements in high-intensity focused ultrasound fields.

A fiber-optic sensor is presented that is capable of measuring the particle displacement in high-intensity focused ultrasound (HIFU) fields. For this probe, a secondary calibration was performed, and the resulting complex frequency response is discussed. As a first practical application, the setup was used to measure the pressure in the field of a weakly focusing ultrasound transducer. The result is compared with that of a membrane hydrophone measurement. The feasibility of measurements in HIFU fields is demonstrated by means of measurements of the spatial distribution of the peak particle velocity within the focus of a HIFU transducer and of the dependence of the peak values on the acoustical power level.

Performance assessment of novel side firing safe tips for endodontic applications.

During root canal or periodontal treatment, directing laser energy onto the walls of the root canal is essential for effective disinfection. This study assessed the performance of four different fiber modifications that have increased lateral emission, including three designs with safe tips to reduce irradiation directed toward the root apex. Free-running pulsed infrared lasers (Nd:YAG, Er:YAG, and Er,Cr:YSGG) and a diode laser (980 nm) were used in combination with plain ended (forward emitting) laser fibers; conical laser fibers, side firing honeycomb pattern fibers without a safe end; honeycomb fibers with silver coated ends, conical fibers with selectively abraded tips, and selectively abraded honeycomb fibers with silver coated tips (20 fibers for each laser type). Laser emissions forward and laterally were measured, and digital photographs and thermally sensitive paper used to record the emission profiles. Thermochromic dyes painted onto the root surface of an extracted tooth were used to explore the distribution of laser energy with different tips designs. All three safe tipped ends gave reduced emissions in the forward direction (range 17-59%), but had similar lateral emission characteristics. Fiber designs with reduced forward emission may be useful for various dental laser procedures.

Comparison of two probe designs for determining intraocular oxygen distribution.

INTRODUCTION: Alterations in intraocular oxygen levels are important contributors to, or indications of, ocular disease. Polarographic electrodes and fibre-optic sensors (optodes) have been used to measure oxygen and to map the distribution of oxygen in animal models and in human eyes. A recent study reported the use of a commercial electrode to compare oxygen distribution in the vitreous of patients undergoing vitrectomy related to central retinal vein occlusion, macular hole or preretinal membrane. The results of this study were at variance with previous measures of oxygen distribution in the human vitreous using polarographic or optical sensors. To resolve this discrepancy, the present study compared measurements made in vitro or in animal eyes, using the electrode employed in the previous study or a fibre-optic sensor of a different design. STUDY DESIGN: Comparative in vitro and in vivo measurements. RESULTS: In vitro, the two devices reported similar levels of oxygen, although the electrode consistently detected levels above the calculated values. In rabbit eyes, the electrode had a slow response time and was unable to detect oxygen gradients that were readily measured by the smaller optode. When the electrode was inserted into an eye of similar size to the human eye, the reference thermistor measured the temperature outside the eye, not in the vitreous. CONCLUSIONS: The design of the electrode used in the previous study makes it unsuitable for measurements of oxygen distribution in the eye.