A New Instrument For Rhinoplasty: The Osteotom With Lighting Guide Transilluminating Osteotomy.

Rhinoplasty remains one of the most commonly performed aesthetic surgical procedure that demands a meticulous intraoperative precision as well as maximum precaution and control. Nasal osteotomy is a key component to shape the bony vault in aesthetic rhinoplasty, but it is also the so versatile, dangerous, and difficult to learn. The present study aims to evaluate the usefulness of our locator instrument for beginners which is called transilluminating osteotome. The use of transilluminating osteotome instead of guided lateral nasal osteotome is a reliable instrument since it facilitates the localization of osteotome and osteotomy line beneath the soft tissue with a limited damage to the surrounding soft tissues. Level of Evidence: III.

In vitro visual and visible light transillumination methods for detection of natural non-cavitated approximal caries.

OBJECTIVES: The objective was to evaluate a visible-light-transillumination (using Digital Imaging Fiber-Optic Transillumination machine: DIFOTI) method using occlusal view (DIFOTI-occl), axial view (buccal and lingual: DIFOTI-axial), and combination of all views (DIFOTI-all) for detecting non-cavitated approximal caries and to compare its performance to visual examination (International Caries Detection and Assessment System: ICDAS). MATERIALS AND METHODS: Thirty extracted human premolars were selected (sound to lesions into the outer one-third of the dentine) based on micro-computed tomography (µ-CT). Teeth were mounted in a custom-made device to simulate approximal contact. DIFOTI (Electro-Optical Sciences Inc., Irvington, NY, USA) images were obtained from the occlusal, buccal, and lingual views. DIFOTI image and ICDAS examinations were performed and repeated by three trained/calibrated examiners. Sensitivity, specificity, area under receiver operating characteristics curve (Az), inter- and intra-class correlation coefficients (ICCs), and correlation were determined. RESULTS: Sensitivity/specificity was for DIFOTI-occl: 0.42/0.75, DIFOTI-axial: 0.86/0.93, DIFOTI-all: 0.91/0.69, and for ICDAS: 0.89/0.83. Az for DIFOTI-occl was significantly lower than that of DIFOTI-axial (p < 0.001), DIFOTI-all (p = 0.002), and ICDAS (p = 0.005). Spearman correlation coefficients with µ-CT for DIFOTI-occl (r = 0.39) showed weak association, while DIFOTI-axial (r = 0.80), DIFOTI-all (r = 0.91), and ICDAS (r = 0.90) showed moderate association. ICCs for intra-examiner repeatability/inter-examiner agreement were for DIFOTI-occl (0.64/0.58), DIFOTI-axial (0.92/0.89), DIFOTI-all (0.85/0.83), and ICDAS (0.79/0.72). CONCLUSIONS: The results of the current in vitro study suggest that, for detection of non-cavitated approximal caries lesions, DIFOTI performs better using axial than occlusal view. CLINICAL RELEVANCE: Approximal non-cavitated caries detection is challenging. DIFOTI can observe images from occlusal-, buccal-, and lingual views. DIFOTI and visual (ICDAS) examinations of buccal- and lingual- and all-views are more suitable than those of occlusal view for a detection of non-cavitated approximal caries.

The usefulness of a trans-illuminated introducer during the Nuss procedure.

Background There has been an increase in the number of patients undergoing the Nuss procedure for cosmetic purposes, thus increasing the need for safer surgery. However, there are reports of massive hemorrhage and organ damage during the Nuss procedure which involves dissection of the anterior mediastinum. We have developed the trans-illuminated introducer that allows safe surgery while maintaining a small surgical incision of less than 1 cm. Methods This study was a retrospective review of 306 patients aged 3-40 years who underwent the Nuss procedure using the trans-illuminated introducer at our hospital between April 2006 and December 2014. Results There were 29 (9.5%) early postoperative complications. The most common early complication was pneumothorax (15 cases, 4.9%). Five (1.6%) patients developed hemothorax in the early postoperative period, which occurred independently of the dissection process of the anterior mediastinum. None of these patients required reoperation or blood transfusion. There were no complications caused by the introducer during dissection of the anterior mediastinum. Conclusions Using the trans-illuminated introducer, we were able to dissect the anterior mediastinum without a major complication, such as massive hemorrhage from the mediastinum, while maintaining a small surgical incision for cosmetic purposes. Therefore, we consider that the trans-illuminated introducer is useful for improving the outcome of the Nuss procedure.

A new retrograde transillumination technique for videolaryngoscopic tracheal intubation.

This single-centre, prospective trial was designed to assess the efficacy of a new retrograde transillumination device called the 'Infrared Red Intubation System' (IRRIS) to aid videolaryngoscopic tracheal intubation. We included 40 adult patients, who were undergoing elective urological surgery under general anaesthesia. We assessed the ability to differentiate the transilluminated glottis from other structures and found a median (IQR [range]) larynx recognition time of 8 (5-14 [3-28]) s. The difference in laryngeal visibility on the screen between the deactivated vs. activated device expressed on a visual analogue scale was significant (6 (4-7 [2-10]) vs. 10 (8-10 [4-10]); p < 0.001). The number of laryngoscope insertions was 1 (1-2 [1-3]) and the device showed high values on a visual analogue scale ranging from 0 (lowest score) to 10 (highest score) for helpfulness (6 (5-7 [2-10])), credibility (10 (8-10 [5-10])) and ease of use (10 (9-10 [8-10])). Tracheal intubation with the system lasted 26 (16-32 [6-89]) s. No alternative technique of securing the airway was necessary. The lowest SpO2 during intubation was 98 (97-99 [91-100])%. We conclude that this method of retrograde transillumination can assist videolaryngoscopy.

Near infrared transillumination compared with radiography to detect and monitor proximal caries: A clinical retrospective study.

OBJECTIVE: To compare near infrared transillumination device, DIAGNOcam (DC) and bitewing radiography (BW) for the detection of proximal caries. MATERIALS AND METHODS: This retrospective analysis of DC and BW images of 18 students in dental medicine who had consented to the anonymous use of their dental record. The data included BW and DC images performed for a check-up in 2013, and corresponding follow-up images performed in 2015. Two observers rated 376 proximal surfaces on a 4-level dentin lesion scale and reached a unanimous rating for each surface. Calculated measures of agreement for each assessment method over time provided the reproducibility of the information obtained by each method. RESULTS: Agreement between 2013 and 2015 within each method was excellent (intraclass correlation coefficient, BW: 0.86, DC: 0.90). Agreement between DC and BW was similar for dentin lesion detection, but was low for enamel caries detection; DC detected more enamel caries than BW. Agreement between DC and BW was modest (0.33 in 2013 and 0.36 in 2015), chiefly because DC identified more enamel caries. CONCLUSION: This study shows that DC is as reliable as BW to detect proximal dentin lesions. DC detects proximal enamel lesions at an earlier stage than BW. DC enables clinicians to differentiate lesions limited to the enamel from lesions that have reached the enamel dentin junction. Regular monitoring with DC should help provide individualized preventive measures and early non-invasive caries management. CLINICAL SIGNIFICANCE: The early detection of enamel lesions with near infrared transillumination can help clinicians undertake early non invasive treatments to prevent or slow down the progression of initial proximal lesions.

Low-Cost Bicycle Lights vs. Cold Lights for Visualizing Neonatal Veins.

Objective: Difficult intravenous (IV) access can compromise patient care in neonatal practice, and transillumination is often used to improve the visibility of veins. Current devices are expensive, prone to bacterial contamination and unaffordable in low-resource settings. We conducted a study comparing the quality of transillumination provided by "cold lights" that are currently in use with low-cost (<£1) red silicone LED bicycle lights. Methods: Photographs of the hands and feet of neonates were taken with parental consent: first without transillumination (control group), second by transillumination with a cold light, and third with a bicycle light. Thirty photographs were sent in a survey to pediatric doctors who were blinded to the method of transillumination. Survey respondents then rated the visibility of the veins (easily visible, moderately visible, barely visible and invisible). Results: Completed surveys of 114 respondents were included in the analysis. The majority (94.8%) of respondents rated the veins moderately to easily visible with the bicycle light compared with 87.6% with the cold light, and 42.6% in the control group with no transillumination. There was a strong evidence of an improvement in visibility with bicycle lights compared with cold lights (p < 0.001). Conclusion: Low-cost red silicone LED bicycle lights were found to improve visibility of veins in neonates. Given their quality of transillumination, portability and reduced cost, they may provide a useful method of transillumination in all settings, but particularly in low-income settings, where there is currently no affordable alternative.

In vitro performance of near infrared light transillumination at 780-nm and digital radiography for detection of non-cavitated approximal caries.

OBJECTIVES: To evaluate the ability of a Near Infrared Light Transillumination (NILT) device to detect non-cavitated approximal caries lesions; and to compare its performance to Digital Radiography (DR). METHODS: Thirty human extracted premolars (sound to lesions into the outer one-third of dentin) were selected. Lesion depth was confirmed by micro-computed tomography (µ-CT). Teeth were mounted in a custom-made device to simulate approximal contact. DR and NILT (CariVu™, DEXIS, LLC, Hatfield, PA, USA) examinations were performed and repeated by three trained and calibrated examiners. Sensitivity, specificity, area under ROC curve (Az), inter- and intra-class correlation coefficients (ICCs) for each method, and correlation among the methods were determined. RESULTS: ICCs for intra-/inter-examiner agreement were substantial for NILT (0.69/0.64), and moderate for DR (0.52/0.48). Sensitivity/specificity for NILT and DR were 0.68/0.93 and 0.50/0.64, respectively. Az for NILT was 0.81, while for DR it was 0.61. Spearman correlation coefficient with µ-CT for NILT (0.65, p<0.001) demonstrated moderate association, while that of DR suggested no association (0.19, p=0.289). CONCLUSION: Within the limitations of this in vitro study, NILT demonstrated a potential for early approximal caries detection. NILT and DR performed the same regarding the accuracy for non-cavitated approximal caries detection; however, NILT was superior to DR in terms of repeatability, agreement and correlation with µ-CT. CLINICAL SIGNIFICANCE: A commercial version of NILT was recently introduced as a non-irradiative adjunctive caries detection method. It uses near infrared (NIR) light at 780-nm to transilluminate teeth and captures live images from the occlusal surface. This study demonstrates that NILT can be used as an alternative to radiography for non-cavitated approximal caries detection.

Pen Torch Transillumination: Difficult Venepuncture Made Easy.

INTRODUCTION: Our novel technique of pen torch transillumination (PTI) uses a cheap and easily available instrument (Penlite-LP212®, Energizer®, Missouri, USA) to visualize superficial veins invisible to the naked eye. We evaluate the efficacy of PTI in improving venepuncture success rate (SR) for patients with poor venous access. METHODS: This prospective randomized controlled trial looked at adult patients (n = 69) aged 21-90 with difficult venous access (history of ≥3 consecutive attempts required for successful cannulation during the current admission) requiring non-emergent venepuncture. Patients underwent venepuncture over the upper-limb using one of the following: conventional venepuncture (control); Veinlite® EMS (TransLite®, Texas, USA), a commercial transillumination device; PTI. Outcome measures were: successful cannulation within 2 attempts and total duration of venepuncture. Fisher's exact and Kruskal-Wallis tests were performed. RESULTS: A significantly larger number of patients had successful venepuncture within 2 attempts using PTI (22/23, 95.7%) and Veinlite (23/23, 100%), compared to the controls (7/23, 30.4%) (p < 0.05). The total duration required for successful venepuncture was significantly shorter for Veinlite (mean 3.7 min, 1.0-5.3 min) and PTI (mean 8.5 min, range 1.08-27 min) compared to the controls (mean 23.2 min, range 1.88-46.5 min) (p < 0.05). CONCLUSIONS: PTI allows users to visualize veins invisible to the naked eye. Thrombosed/tortuous veins, branch points and valves, are easily identified and avoided. It has comparable efficacy to Veinlite® and is cheaper (Veinlite®-USD 227 vs. Penlite-LP212®-USD 7.00) and more easily available. PTI improves patient care, especially in developing regions where costs are a concern.

Near-IR and CP-OCT imaging of suspected occlusal caries lesions.

INTRODUCTION: Radiographic methods have poor sensitivity for occlusal lesions and by the time the lesions are radiolucent they have typically progressed deep into the dentin. New more sensitive imaging methods are needed to detect occlusal lesions. In this study, cross-polarization optical coherence tomography (CP-OCT) and near-IR imaging were used to image questionable occlusal lesions (QOC's) that were not visible on radiographs but had been scheduled for restoration on 30 test subjects. METHODS: Near-IR reflectance and transillumination probes incorporating a high definition InGaAs camera and near-IR broadband light sources were used to acquire images of the lesions before restoration. The reflectance probe utilized cross-polarization and operated at wavelengths from 1,500 to 1,700 nm where there is an increase in water absorption for higher contrast. The transillumination probe was operated at 1,300 nm where the transparency of enamel is highest. Tomographic images (6 × 6 × 7 mm3 ) of the lesions were acquired using a high-speed swept-source CP-OCT system operating at 1,300 nm before and after removal of the suspected lesion. RESULTS: Near-IR reflectance imaging at 1,500-1,700 nm yielded significantly higher contrast (P < 0.05) of the demineralization in the occlusal grooves compared with visible reflectance imaging. Stains in the occlusal grooves greatly reduced the lesion contrast in the visible range yielding negative values. Only half of the 26 lesions analyzed showed the characteristic surface demineralization and increased reflectivity below the dentinal-enamel junction (DEJ) in 3D OCT images indicative of penetration of the lesion into the dentin. CONCLUSION: This study demonstrates that near-IR imaging methods have great potential for improving the early diagnosis of occlusal lesions. Lasers Surg. Med. 49:215-224, 2017. © 2017 Wiley Periodicals, Inc.

Digital transillumination in caries detection versus radiographic and clinical methods: an in-vivo study.

OBJECTIVES: This article aimed to evaluate: (a) the agreement between a near-infrared light transillumination device and clinical and radiographic examinations in caries lesion detection and (b) the reliability of images captured by the transillumination device. METHODS: Two calibrated examiners evaluated the caries status in premolars and molars on 52 randomly selected subjects by comparing the transillumination device with a clinical examination for the occlusal surfaces and by comparing the transillumination device with a radiographic examination (bitewing radiographs) for the approximal surfaces. Forty-eight trained dental hygienists evaluated and reevaluated 30 randomly selected images 1-month later. RESULTS: A high concordance between transillumination method and clinical examination (kappa = 0.99) was detected for occlusal caries lesions, while for approximal surfaces, the transillumination device identified a higher number of lesions with respect to bitewing (kappa = 0.91). At the dentinal level, the two methods identified the same number of caries lesions (kappa = 1), whereas more approximal lesions were recorded using the transillumination device in the enamel (kappa = 0.24). The intraexaminer reliability was substantial/almost perfect in 59.4% of the participants. CONCLUSIONS: The transillumination method showed a high concordance compared with traditional methods (clinical examination and bitewing radiographs). Caries detection reliability using the transillumination device images showed a high intraexaminer agreement. Transillumination showed to be a reliable method and as effective as traditional methods in caries detection.

[Digital imaging fiber optic transillumination (DIFOTI) method for determining the depth of cavity].

OBJECTIVE: To analyze the accuracy of the digital imaging fiber optic transillumination (DIFOTI) on diagnosis of caries lesions depth using DIAGNOcam system. METHODS: This experiment adopted self-matching design. Seventy-four extracted teeth (molar: sixty-six, premolar: eight) with one caries lesions in proximity which were not damaged in surface marginal ridge were selected. Dental calculus and dental stains were removed from the extracted teeth for standby application. A sign was marked in the middle of the occlusal surface edge at the side of decay. Then the teeth were fixed in the standard model of dentition and cavities were adjacent with the sound tooth surface. Sticky wax was applied to seal the level of 2 mm beyond cemento-enamel junction (CEJ) in the direction of occlusion and interproximal space to imitate gingival margin and gingival papilla. The standard models of dentition was seated in imitation head mold. The lesions depth degree was looked into and checked with DIAGNOcam system. Besides, the pictures on the occlusal surfaces were recorded and saved. The sign above could be seen on the picture. The measuring tool in DIAGNOcam system was used to measure the depth of the caries from the sign (as starting point) to the deepest point of caries in the pictures and its length was recorded for a. The line a was lengthened to the contralateral edge of occlusal surface in the photo and the length was recorded for b. A line from the marked point on the occlusal surface edge of the extracted teeth was draw parallel to the line b on the corresponding photo and its length was recorded for c. The depth of the cavities on the projected images was recorded for d, and calculated d/a=c/b (digital optical fiber measured decay depth/caries damage depth of the image=actual tooth width/tooth width of the image), and d=c/b×a inferred. At last, the teeth were taken out from the standard model dentition. The decay of the tooth was removed completely. The actual depth of the cavity was recorded for D. The difference between d and D was recorded for Δd. The software of SPSS 20.0 was used to test the consistency of the results, and the MedCalc 14.8.1.0 software was used for Bland-Altman analysis. RESULTS: The intraclass correlation coefficient (ICC) between d and D was 0.951 (ICC>75%), P=0.263. There was a function relationship y=0.23+0.91x between d(x) and D(y). Bland-Altman analysis method showed that the mean of Δd (Δdmean) was 0.05 mm, the standard deviation of Δd (ΔdSD)=0.308, and the 95% confidence interval was (-0.55 to 0.65). The amplitude of difference was clinically acceptable. So the consistency of the two measurement modes was high. CONCLUSION: There was no significant difference between the depth of caries lesions checked with DIAGNOcam system and the depth of the actual cavity, and the consistency was very good. The vitro study suggests that the DIAGNOcam system may be used to assess the depth of caries cavity as a useful tool in diagnosis and treatment.

Near-IR transillumination and reflectance imaging at 1,300 nm and 1,500-1,700 nm for in vivo caries detection.

INTRODUCTION: Several studies suggest that near-IR imaging methods at wavelengths longer than 1,300 nm have great potential for caries detection. In this study, the diagnostic performance of both near-IR transillumination and near-IR reflectance was assessed on teeth scheduled for extraction due to orthodontic treatment (n = 109 teeth on 40 test subjects). METHODS: Three intra-oral near-IR imaging probes were fabricated for the acquisition of in vivo images using a high definition InGaAs camera and near-IR broadband light sources. Two transillumination probes provided occlusal and approximal images using 1,300 nm light which manifests the highest transparency in enamel. A third reflectance probe utilized cross-polarization and operated at wavelengths greater than 1,500 nm where water absorption is higher which reduces the reflectivity of sound tissues, significantly increasing lesion contrast. Teeth were collected after extraction and sectioned and examined with polarized light microscopy and microradiography which served as the gold standard. In addition, radiographs were taken of the teeth and the diagnostic performance of near-IR imaging was compared with radiography. RESULTS: Near-IR imaging was significantly more sensitive (P < 0.05) than radiography for the detection of lesions on both occlusal and proximal surfaces. CONCLUSION: Near-IR imaging methods are ideally suited for screening all tooth surfaces for carious lesions. Lasers Surg. Med. 48:828-836, 2016. © 2016 Wiley Periodicals, Inc.

Light Augmentation Device: A New Surgical Tool for Improved Laparoscopic Visibility and Transillumination: Proof-of-Concept Study.

The light augmentation device (LAD®) is a new disposable tool designed to improve observation by transillumination in laparoscopic surgery. It can be introduced into the abdomen through an 11-12 mm port as a supplementary light source. The miniaturized design allows the surgeon to pick up the device with an endograsper and to place it under direct vision where needed. This proof-of-concept study demonstrated safety and efficacy of the device in the animal model.

Visualization Enhancement of Dentinal Defects by Using Light-Emitting Diode Transillumination.

INTRODUCTION: Several recent studies have evaluated the presence of dentinal defects after root canal preparation in extracted human teeth by using the root sectioning methodology. The objective of this research was to investigate whether light-emitting diode (LED) transillumination enhances the visualization of dentinal defects by using a root sectioning methodology. METHODS: Forty mesial roots of mandibular molars were sectioned at 3, 6, and 9 mm from the apex with a low-speed saw under water cooling. Microscopic pictures of the specimens were taken by using ×19.2 magnification for the 3-mm slice and ×12.8 magnification for the 6- and 9-mm slices. The LED transillumination was done by positioning an LED probe at 4 different locations (mesial, distal, buccal, and lingual). The root canal lumen was masked, and 2 independent evaluators assessed the presence of dentinal defects on the non-LED and LED images. The number of dentinal defects was recorded, and χ(2) test was used for statistical analysis (P < .05). RESULTS: The number of slices presenting dentinal defects at 3, 6, and 9 mm were 2 (5%), 1 (2.5%), and 1 (2.5%), respectively, for the non-LED assessment and 8 (20%), 10 (25%), and 9 (22.5%), respectively, for the LED assessment. Overall, 4 of the specimens (10%) presented dentinal defects without LED evaluation, and 19 of the specimens (47.5%) presented dentinal defects with LED evaluation. This difference was statistically significant (P < .05). CONCLUSIONS: LED transillumination enhanced the visualization of dentinal defects in uninstrumented roots. The results from previous studies that used the traditional non-LED sectioning methodology should be evaluated with caution.

Appropriate head position for nasotracheal intubation by using lightwand device (Trachlight).

The purpose of this study was to determine the relationship between the head position and the subsequent ease of nasotracheal intubation by using the lightwand device Trachlight (TL). Patients requiring nasotracheal intubation were subdivided into 3 groups according to the intubated head position (group S: sniffing position; group E: extension position; and group N: neutral position). The number of attempts, the total intubation time, and the failures of the TL intubation were recorded. Intubation difficulty by means of TL was assessed by the ordinal 6-point scale. Of the 300 patients enrolled in the study, TL intubation was successful in 91.3% of them. There was no significant difference in the success rate of the first attempt between the groups. No correlation between the ordinal scale and the head position was observed. The total intubation time and the ratio of "unsuccessful" cases were not significantly different among the 3 groups. TL is an effective alternative for patients who require nasotracheal intubation. Our study did not determine the most favorable head position for nasotracheal intubation with the TL, so we recommend that nasotracheal intubation with TL be started with the head in the neutral position and then changed to a more appropriate position, if necessary, on an individual basis.

Effective date of requirement for premarket approval for transilluminator for breast evaluation and sorbent hemoperfusion system (SHS) devices for the treatment of hepatic coma and metabolic disturbances; reclassification of SHS and devices for the treatment of poisoning and drug overdose. Final order.

The Food and Drug Administration (FDA) is issuing a final order to require the filing of a premarket approval application (PMA) for the transilluminator for breast evaluation and sorbent hemoperfusion system (SHS) devices for the treatment of hepatic coma and metabolic disturbances and to reclassify SHS devices for the treatment of poisoning and drug overdose, a preamendments class III device, into class II (special controls).

Evaluation of shear bond strength of orthodontic brackets using trans-illumination technique with different curing profiles of LED light-curing unit in posterior teeth.

BACKGROUND: Although using light-cured composites for bonding orthodontic brackets has become increasingly popular, curing light cannot penetrate the metallic bulk of brackets and polymerization of composites is limited to the edges. Limited access and poor direct sight may be a problem in the posterior teeth. Meanwhile, effectiveness of the trans-illumination technique is questionable due to increased bucco-lingual thickness of the posterior teeth. Light-emitting diode (LED) light-curing units cause less temperature rise and lower risk to the pulpal tissue. The purpose of this study was to evaluate the clinical effectiveness of trans-illumination technique in bonding metallic brackets to premolars, using different light intensities and curing times of an LED light-curing unit. METHODS: Sixty premolars were randomly divided into six groups. Bonding of brackets was done with 40- and 80-s light curing from the buccal or lingual aspect with different intensities. Shear bond strengths of brackets were measured using a universal testing machine. Data were analyzed by one-way analysis of variance test and Duncan's post hoc test. RESULTS: The highest shear bond belonged to group 2 (high intensity, 40 s, buccal) and the lowest belonged to group 3 (low intensity, 40 s, lingual). Bond strength means in control groups were significantly higher than those in experimental groups. CONCLUSIONS: In all experimental groups except group 6 (80 s, high intensity, lingual), shear bond strength was below the clinically accepted values. In clinical limitations where light curing from the same side of the bracket is not possible, doubling the curing time and increasing the light intensity during trans-illumination are recommended for achieving acceptable bond strengths.