Sexual dimorphism in the mandible in a Portugese population - Predicting the gender for forensic purpose: a pilot study / Dimorfismo sexual mandibular da população Portuguesa ­ Predição do gênero para análise forense: um estudo piloto

Este estudo teve como objetivo avaliar o dimorfismo sexual em uma coleção de mandíbulas portuguesas através de uma metodologia métrica digital, utilizando análise estatística descritiva, inferencial e multivariada para identificar quais parâmetros são mais dimórficos e quais são os melhores preditores de sexo. Trinta e três mandíbulas (14 mulheres e 19 homens) e pertences pessoais foram fotograficamente registrados com código e sexo. Os dados foram coletados por tomografia e as medidas foram feitas pelo software Simplant Pro. Foram registrados a largura máxima e mínima do ramo mandibular, altura condilar, altura do processo coronoide, altura da sínfise mandibular, ângulo mandibular, distâncias bimentual, biantegonial, bigonial e bicondilar e comprimento máximo mandibular. A análise estatística foi realizada utilizando IBM® SPSS. Os resultados mostraram diferenças estatisticamente significativas para os seguintes parâmetros: altura do processo coronoide, altura do côndilo, comprimento máximo da mandíbula e largura mínima do ramo mandibular. Na análise estatística multivariada foi possível identificar a altura do processo coronoide como melhor preditor de sexo com precisão em 72,2% dos casos. Isto permite uma diferenciação mais fácil entre mandíbulas femininas e masculinas com uma precisão de 64,3% e 78,9%, respectivamente. Foi possível concluir que a altura do processo coronoide é o parâmetro mais dimórfico e o melhor preditor de sexo na amostra.

This study aimed to assess sex dimorphism in a collection of Portuguese mandibles through a digital metric methodology by using descriptive, inferential, and multivariate statistical analysis to identify which parameters are the most dimorphic and which are the best sex predictors. Thirty-three mandibles (14 females and 19 males) and personal belongings were photographically registered with code and sex. Data was collected using tomography, and measurements were made using the Simplant Pro software. The maximum and minimum width of the mandibular ramus, condylar height, coronoid process height, mandibular symphysis height, mandibular angle, bi-mental, bi-antegonial, bi-gonial and bi-condylar distances, and maximal mandibular length were registered. Statistical analysis was performed using IBM® SPSS. The results showed statistically significant differences for the following parameters: coronoid process height, condyle height, the maximum length of the mandible, and the minimum width of the mandibular ramus. In the multivariate statistical analysis, it was possible to identify the coronoid process height as the best sex predictor accurately in 72.2% of cases. This allows for easier differentiation between female and male mandibles with an accuracy of 64.3% and 78.9%, respectively. It was possible to conclude that the coronoid process height is the most dimorphic parameter and the best sex predictor in the sample.

Cranial musculature of batoids: A standardized nomenclature.

Batoids (rays and skates) are cartilaginous fishes whose jaws are not articulated directly to the neurocranium. The only point of contact between them are the hyomandibular cartilages, resulting in a unique mandibular suspension called euhyostyly. Due to this decoupling of the jaws from the skull, muscles play an essential role in modulating mandibular movements during the feeding process, especially during mandibular protrusion. The main objectives of our study were: (1) to examine the mandibular musculature of eight batoid species from different orders in the Batoidea and (2) establish a standardized musclulature terminology for future comparative myological studies in batoids. For each muscle bundle, the general characteristics of each cranial muscle were described and their origin and insertions were identified. The number of muscle bundles differed intraspecifically. On the dorsal surface, we reported the first evidence of the presence of the precranial muscle (PCM) in U. halleri, as well as the ethmoideo-parethmoidalis muscle (ETM) in R. velezi, P. glaugostigma and Z. exasperata; in addition, the insertion of the spiracularis muscle (SP) extended to the ventral surface of the oropharyngeal tract in myliobatiforms. On the ventral surface of the head, both N. entemedor and M. californica exhibited additional muscles in the mandibular area. These muscles were renamed as part of the standardization of mandibular terminology: the depressor mandibularis minor (DMM) in N. entemedor and the adductor mandibulae profundus (AMP) in M. californica. The standardization of terminology is essential for futures studies of the mandibular apparatus in batoids, to facilitate the morphological description of muscles in species without anatomical accounts and for continuity in broader comparative analyses.

Anatomical and Computed Tomography Study of the Mandible of the Patagonian Huemul (Hippocamelus bisulcus): Ecological and Clinical Insights.

Given the high prevalence of skeletal and mandibular diseases in the Patagonian Huemul, comprehensive anatomical studies are essential to understand the impact of nutritional deficiencies and support conservation efforts. The aim of this study is to provide a detailed anatomical characterisation of three exhumed mandibles of Patagonian huemul (Hippocamelus bisulcus) through three-dimensional reconstructions obtained from computed tomography data and semi-automatic segmentation, documenting their distinctive features. The findings revealed distinctive features in the mandible, consistent with the browsing habits of herbivores, such as a robust coronoid process, a wide and deep pterygoid fossa, a significantly lower mandibular condyle compared to other deer species and a unique configuration of the mandibular canal with a curved caudal portion and a straight rostral portion. These anatomical adaptations are likely related to the species' feeding habits and behaviour. The study also addressed the challenges of researching an endangered species, given that access to biological material is restricted by strict regulations in Chile and Argentina. These restrictions limited the available sample size and hindered the acquisition of additional specimens, which could affect the generalisation of the results. Despite these limitations, the research provides valuable anatomical insights that are fundamental for the biology, clinical practice and management of specimens. In conclusion, the mandibles of both juvenile and adult Patagonian huemul demonstrate distinctive features characteristic of browsing herbivores. The findings can serve as a basis for future comparative studies on mandibular anatomy and function in this endangered deer species as well as in other herbivorous deer.

CBCT assessment of mandibular molar furcation following root canal retreatment using engine-driven instruments.

This study employed e-Vol DXS cone beam computed tomography (CBCT) software to assess dentin remnants in the furcation area of mesial canals in mandibular molars during root canal retreatment (RCR). Four groups (Reciproc®, ProTaper Next®, Race Evo®, Protaper Gold®) were subjected to RCR, and CBCT images were captured before (T1) and after (T2) treatment. Measurements of remaining dentin thickness at 1 mm and 3 mm below the furcation were scrutinized. Results revealed no significant differences in mean thicknesses of mesiobuccal (MB) and mesiolingual (ML) canals at 1 mm and 3 mm from the furcation pre-treatment (T1). Post-treatment (T2) showed analogous findings, with no significant differences in mean thicknesses. However, disparities were found between MB and ML canals at both distances, both before and after retreatment. In essence, the evaluated instruments exhibited safety in RCR, implying that they are appropriate for use in critical areas of mandibular molars without inducing excessive wear. This study underscores the reliability of these instruments in navigating danger zones during RCR, and contributes valuable insights for dental practitioners who handle complex root canal scenarios in mandibular molars.

Impact of L-PRF on pain and healing outcomes in lower third molar surgery: a randomized split-mouth trial.

This study explored the effects of L-PRF on pain, soft tissue healing, periodontal condition, and post-extraction bone repair of mandibular third molars (3Ms). A randomized, prospective, triple-blind, split-mouth clinical trial was conducted with 34 volunteers. Eligible patients were randomly allocated into two treatments: G1 (without L-PRF), G2 (alveoli filled with L-PRF), in which the removal of bilateral 3Ms was performed at the same surgical time. Outcomes were assessed according to a visual analogue scale (pain), soft tissue scoring system (wound healing), periodontal probing of mandibular second molar. Bone repair was determined by volumetric analysis (ITK-SNAP software) and fractal analysis (ImageJ software). An intention-to-treat approach to Statistical analysis was used. L-PRF reduced pain in the 7-day postoperative follow-up (p = 0.019) and not only improved soft tissue healing after 1 month of follow-up (p = 0.021), but also probing depth (distal face) in 3 months postoperatively (p = 0.011). Significant alveolar reduction occurred in 3 months after surgery in both treatments (p < 0.05), however, this was more significant in G1 (p = 0.016). The fractal dimension showed no statistical differences. L-PRF improved postoperative clinical parameters of pain, soft tissue healing, and periodontal condition, suggesting that it has a beneficial effect on preserving the alveolar ridge and accelerating the initial repair process.

Mandibular overdentures retained by 1 or 2 implants: a 5-year randomized clinical trial on implant stability and peri-implant outcomes.

AIM: This is a report of the 5-year results of a two-group parallel randomized clinical trial comparing longitudinal implant stability, and clinical and radiographic peri-implant outcomes of mandibular overdentures retained by one (1-IOD group) or two (2-IOD group) implants. METHODS: All participants received 4.1 mm diameter tissue-level implants (Straumann® Standard Plus - SLActive®, Institut Straumann AG), installed in the mandible midline (1-IOD; n = 23) or the lateral incisor-canine area bilaterally (2-IOD; n = 24), and loaded after 3 weeks. Implant Stability Quotient (ISQ) was measured using a resonance frequency device (Osstell® Mentor, Integration Diagnostics) at implant placement, after three weeks (loading), and at the 6-month, 1-, 3-, and 5-year follow-ups. Marginal bone loss and clinical implant outcomes (plaque, calculus, suppuration and bleeding) were assessed periodically up to 5 years after loading. RESULTS: Only minor changes in marginal bone level were observed after 5 years (mean = 0.37; SD = 0.44 mm), and satisfactory and stable peri-implant parameters were observed throughout the 5-year follow-up. No significant differences between groups were found. Overall, the mean primary implant stability was considered high (> 70) for the two groups (1-IOD = 78.1 ± 4.5; 2-IOD = 78.0 ± 5.8). No noticeable changes were observed between implant insertion and loading. A marked increase was observed from insertion to the 6-month follow-up - the mean difference for the 1-IOD group was + 5.5 ± 5.5 (Effect size = 1.00), while for the 2-IOD group, the mean difference was + 6.0 ± 5.6 (Effect size = 1.08). No relevant changes were observed throughout the follow-up periods up to 5 years. Linear mixed-effect model regression showed no influence of the bone-related variables (p > 0.05) and the number of implants (p = 0.087), and a significant effect of the time variable (p < 0.001). CONCLUSION: Satisfactory peri-implant outcomes and stable secondary stability suggest good clinical performance and successful long-term osseointegration of the implants for single and two-implant mandibular overdentures. Using a single implant to retain a mandibular overdenture does not seem to result in detrimental implant loading over the five years of overdenture use. CLINICAL RELEVANCE: This study corroborates the use of a single implant to retain a mandibular denture.

Fluctuating arch symmetry: a comparison of two methods of assessment - applicability and efficiency.

INTRODUCTION: Symmetry is balance, some correspondence in the size, form, and arrangements of parts on opposite sides of a plane, line, or point. The opposite of this concept is asymmetry, or imbalance. OBJECTIVE: This retrospective study compared two methods for assessing arch symmetry with linear measurements based on triangles, to determine their applicability and efficiency. METHODS: Two groups were enrolled: children (n=20) and adults (n=20), and the arch symmetry was assessed from linear measurements. Method 1: the incisor-canine (INC), canine-molar (CM), and incisor-molar (INM) distances (paired t-test and Pearson correlation). Method 2: a mathematical equation between the cusps measurements of the canines and the distobuccal of the first molars leading to result 1 (t-test for one sample and bootstrapping analysis). Dental casts were digitized and analyzed using a software program. The Bland-Altman test compared the methods (α=0.05). RESULTS: The Bland-Altman test revealed concordance between the methods; however, separately the results were different: In method 1, the mandibular arch did not demonstrate correlation (children, INC r=0.33; CM r=0.45; INM r=0.51; adults, CM r=0.46; INM r=0.35), however, the maxilla revealed a strong correlation in children and a strong/moderate correlation in adults. In method 2, both arches were symmetrical (p>0.05). CONCLUSION: Method 1 may be appropriate during orthodontic treatment, and method 2 may be indicated for final treatment. These methods are useful; however, only method 1 identified the side of asymmetry. The methods can contribute to future studies in syndromic and non-syndromic patients, before and after orthognathic surgeries and orthodontic treatment, comparing results.

Analysis of osseointegration of implants with macrogeometries with healing chambers: a randomized clinical trial.

BACKGROUND: To verify the influence of macrogeometry with healing chambers on the osseointegration of dental implants by analyzing implant stability quotient (ISQ) and evaluate the correlation between insertion torque and ISQ insertion with different macrogeometries. METHODS: In total, 26 implants were installed in the posterior mandible of eight patients with sufficient bone height for the installation of implants measuring 3.5 mm in diameter and 9.0 mm in length. The implants were categorized according to two types of macrogeometry: a test group (GT) with 13 conical implants with healing chambers and a control group (GC) with 13 conical implants with conventional threads. To insert the implants, a bone drilling protocol was used up to a diameter of 3 mm with the last helical bur. The insertion torque of the implants was evaluated, followed by the measurement of ISQ at 0 (T-0), 7 (T-7), 14 (T-14), 21 (T-21), 28 (T-28), and 42 (T-42) days. RESULTS: The mean insertion torque was 43 Ncm in both groups, without a significant difference. Moreover, no significant difference in the ISQ values was found between the groups at different time points (p > 0.05), except at T-7 (GT = 69.87±1.89 and GC = 66.48±4.49; p = 0.01). Although there was no significant difference, ISQ median values were higher in the GT group than GC group at 28 days (GT = 67.98 and GC = 63.46; p = 0.05) and 42 days (GT = 66.12 and GC = 60.33; p = 0.09). No correlation was found between the insertion torque and ISQ insertion (p > 0.05). CONCLUSION: Furthermore, implants with a 3.5 mm diameter macrogeometry, with or without healing chambers, inserted with a drilling protocol up to 3 mm in diameter of the last helical bur, led to a similar secondary stability, with no difference in ISQ values. Although, implants with healing chamber demonstrates ascending values in the graph of ISQ, having a trend of faster osseointegration than implants without healing chambers. Both macrogeometries provide a similar primary stability to implants. TRIAL REGISTRATION: This study was registered retrospectively in ReBec (brazilian registry of clinical trials) under the number RBR-96n5×69, on the date of 19/06/2023.

Importance of local and systemic factors in preventing implant displacement in the mandibular body: a scoping review of existing literature.

BACKGROUND: The aim of this research was to analyse the current literature on displaced dental implants in the mandibular body, including local and systemic variables related to their cause, and to identify the most frequent location. METHODS: The study conducted a search of three databases (Pubmed, Scopus, and Web of Science) using specific index terms such as 'dental implant', 'displacement', 'dislocation', 'displaced', and 'mandible'. The analysis focused on the direction of displacement and the characteristics of the bone tissue (bone quality, density, and quantity) in cases where dental implants were displaced. RESULTS: A total of 371 articles were obtained. Thirteen of these articles were selected and read in full. To define bone quality, the Lekholm and Zarb classification, modified by Rosas et al., was used. The type II-B bone, which is characterized by thick cortical bone surrounding cancellous bone with extremely wide medullary spaces, presented the largest number of complications. Twenty-two cases were found in which the displacement direction was horizontal. Of these, four were displaced vestibularly, fourteen lingually, and four remained in the center. Additionally, 24 cases presented vertical displacement, with 12 displaced towards the inferior border of the mandible, 9 towards the middle or adjacent to the inferior dental nerve canal, and 3 above the inferior dental nerve canal. CONCLUSION: The accidental displacement of implants within the mandibular body is associated with various risk factors, including the characteristics of the bony trabeculum and the size of the medullary spaces. It is reasonable to suggest that only an adequate pre-surgical diagnostic evaluation, with the help of high-resolution tomographic images that allow a previous evaluation of these structures, will help to have better control over the other factors, thus minimizing the risk of displacement.

Variations in head tilt during the acquisition of cone beam computed tomography scans and their effects on effective radiation dose.

OBJECTIVES: This study evaluated the impact of variations in anteroposterior and lateral tilts of patients head on radiation-weighted doses to organs/tissues and effective doses using 3 different cone beam computed tomography (CBCT) machines. METHODS: An anthropomorphic phantom was used to estimate radiation doses in 3 CBCT machines (OP300, Eagle X 3D, and Eagle Edge). Thermoluminescent dosimeters were placed in regions corresponding to pre-stablished organ/tissues. CBCT examinations from the posterior mandible and anterior maxilla regions were acquired, with 3 different anteroposterior angulations (0°, 30°, and 45°), and from the posterior mandible in 3 different lateral angulations (0°, 20° to the left, and 20° to the right side). Radiation-weighted doses for each organ/tissue and effective doses were calculated for each machine and angulation. RESULTS: For the posterior mandible acquisitions, anteroposterior angulations of the head at 30° and 45° yielded a reduction in effective doses in all 3 devices. A 20° tilt to the right side resulted in lower doses than to the left [same side as the field of view (FOV)]. For the anterior maxilla, increased anteroposterior angulation was associated with reduction in effective dose in 2 devices. CONCLUSIONS: Effective doses are lower when small FOV CBCT exams of the posterior mandible and anterior maxilla are acquired with increased anteroposterior head angulation at 30° and 45°. For FOV in the posterior mandible, a 20° lateral tilt towards the side opposite to the FOV also yields lower effective doses. The main contribution to these dose reductions is the decrease in dose to salivary glands.

Rheumatoid Arthritis and Osteoarthritis in Adult Women: A Functional Approach to the Stomatognathic System.

Rheumatoid arthritis and osteoarthritis both affect the articular cartilage, and are characterized by signs and symptoms that can affect the functions of the human body. This cross-sectional observational study evaluated electromyographic activity in the masseter and temporalis muscles, molar bite force, and mandibular mobility in adult women with rheumatoid arthritis or osteoarthritis. A total of 42 women were distributed into 3 groups: rheumatoid arthritis group (ARG, n=14); osteoarthritis group (OAG, n=14); and a healthy control group (CG, n=14). Electromyography was used to evaluate mandibular tasks at rest, right and left laterality, protrusion, and dental clenching during maximum voluntary contraction, with and without parafilm, and a dynamometer was used to analyse the right and left molar bite forces. A digital caliper was used to measure the range of mandibular movement for maximum mouth opening, right and left laterality, and protrusion. Statistical analyses were performed, including analysis of variance and Tukey's test (P<0.05). Electromyography showed no significant differences between the groups when evaluating the masticatory muscles during the mandibular tasks. Significant difference was observed between the ARG and CG, however, in the maximum right (P=0.007) and left (P=0.02) molar bite forces. Significant difference was observed in the maximum mouth opening of the ARG and OAG groups compared with that of the CG (P=0.009), suggesting that adult women with rheumatoid arthritis or osteoarthritis experience functional alterations in the stomatognathic system, particularly in molar bite force and maximum mouth opening.

Mandible development under gestational protein restriction: cellular and molecular mechanisms.

Insufficient evidence regarding how maternal undernutrition affects craniofacial bone development persists. With its unique focus on the impact of gestational protein restriction on calvaria and mandible osteogenesis, this study aims to fill, at least in part, this gap. Female mice were mated and randomized into NP (normal protein) or LP (low protein) groups. On the 18th gestational day (GD), male embryos were collected and submitted to microtomography (µCT), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), PCR, and autophagy dynamic analyses. The study shows that the LP offspring exhibited lower body mass than the NP group, with µCT analysis revealing no volumetric differences in fetus's head. EDS analysis showed lower calcium and higher phosphorus percentages in mandibles and calvaria. SEM assessment evidenced higher hydroxyapatite crystal-like (HC) deposition on the calvaria surface in LP fetus. Conversely, lower HC deposition was observed on the mandible surface, suggesting delayed matrix mineralization in LP fetuses with a higher percentage of collagen fibers in the mandible bone. The autophagy process was reduced in the mesenchyme of LP fetuses. PCR array analysis of 84 genes revealed 27 genes with differential expression in the LP progeny-moreover, increased mRNA levels of Akt1, Mtor, Nfkb, and Smad1 in the LP offspring. In conclusion, the results suggest that gestational protein restriction anticipated bone differentiation in utero, before 18GD, where this process is reduced compared to the control, leading to the reduction in bone area at 15 postnatal day previously observed. These findings provide insights into the molecular and cellular mechanisms of mandible development and suggest potential implications for the Developmental Origins of Health and Disease (DOHaD).

Mandibular gland proteomics of the Mexican alligator lizard, Abronia graminea, and the red-lipped arboreal alligator lizard, Abronia lythrochila.

A useful approach to deepen our knowledge about the origin and evolution of venom systems in Reptilia has been exploring the vast biodiversity of this clade of vertebrates in search of orally produced proteins with toxic actions, as well as their corresponding delivery systems. The occurrence of toxins in anguimorph lizards has been demonstrated experimentally or inferred from reports of the toxic effects of the oral secretions of taxa within the Varanidae and Helodermatidae families. In the present study, we have focused on two alligator lizards of the Anguidae family, the Mexican alligator lizard, Abronia graminea, and the red-lipped arboreal alligator lizard, A. lythrochila. In addition, the fine morphology of teeth of the latter species is described. The presence of a conserved set of proteins, including B-type natriuretic peptides, cysteine-rich secretory proteins, group III phospholipase A2, and kallikrein, in submandibular gland extracts was demonstrated for both Abronia species. These proteins belong to toxin families found in oral gland secretions of venomous reptile species. This finding, along with previous demonstration of toxin-producing taxa in both paleo- and neoanguimorpha clades, provides further support for the existence of a handful of conserved toxin families in oral secretions across the 100+ million years of Anguimorpha cladogenesis.

Localización Morfológica del Foramen Mental con Tomografía Computarizada Cone-Beam en San Luis Potosí, México / Morphological Location of the Mental Foramen with Cone-Beam Computed Tomography in San Luis Potosí, Mexico

El foramen mental, una abertura en la parte inferior de la mandíbula, es la salida de un ramo del nervio alveolar inferior, proporcionando sensibilidad a la mandíbula y la piel del mentón. Su variabilidad anatómica es importante en procedimientos dentales y quirúrgicos. Nuestro estudio en San Luis Potosí, México, examinó la posición y características morfológicas del foramen mental en una muestra de tomografías computarizadas de la mandíbula. En mujeres, la zona entre el primer y segundo premolar fue la más común, mientras que en hombres, fue la misma zona pero con mayor prevalencia en el lado izquierdo. Se observaron diferencias en la dirección del foramen mental entre sexos y lados de la mandíbula, con la dirección posterior predominante en ambos sexos. Estos hallazgos concuerdan con estudios previos en diferentes poblaciones, aunque se identifican variaciones significativas en la prevalencia y ubicación específica del foramen. La comparación con otros estudios resalta la importancia de considerar factores étnicos y geográficos en la interpretación de los resultados. Las diferencias anatómicas observadas tienen implicaciones clínicas importantes para procedimientos dentales y quirúrgicos, subrayando la necesidad de enfoques adaptados a la población específica para mejorar la precisión y seguridad de las intervenciones en el área del mentón.

SUMMARY: The mental foramen, an opening at the bottom of the jaw, is the exit of the inferior alveolar nerve branch, providing sensation to the jawbone and skin of the chin. Its anatomical variability is important in dental and surgical procedures. Our study was carried out in San Luis Potosí, Mexico and examined the position and morphological characteristics of the mental foramen in a sample of lower jaw CT scans. In women, the area between the first and second premolar was the most common, while in men, it was the same area but with a greater prevalence on the left side. Differences in the direction of the mental foramen were observed between sexes and sides of the mandible, with the posterior direction predominating in both sexes. These findings are consistent with previous studies in different populations, although significant variations in the prevalence and specific location of the foramen are identified. The comparison with other studies highlights the importance of considering ethnic and geographic factors in the interpretation of results. The anatomical differences observed have important clinical implications for dental and surgical procedures, underscoring the need for approaches tailored to the specific population to improve precision and safety of interventions in the mental foramen area.

Examining the Impact of Acute Binge Alcohol Consumption on Trabecular Morphometry and Tensile Strength in Adolescent Sprague Dawley Rat Mandibles / Análisis del Impacto del Consumo Excesivo de Alcohol en la Morfometría Trabecular y la Resistencia a la Tracción en Mandíbulas de Ratas Adolescentes Sprague Dawley

SUMMARY: Underage drinking has become a major public concern having a negative impact on the growth and development of the skeleton. Peak bone mass is attained during adolescence hence the aim of the study was to investigate the effect of acute binge alcohol consumption on trabecular morphometry and tensile strength of the adolescent mandible in the Sprague Dawley (SD) rat. The study comprised of 24 SD rats, aged 7 weeks, placed into either the alcohol-exposed [n=12 (6 males and 6 female)] or pair-fed control group [n=12 (6 male and 6 female)]. The treatment of the groups was as follows; the alcohol exposed group and the pair-fed control were administered a single daily dose of 3 g/kg of 20 % alcohol 3 days a week (alternate days) for 7 days and a caloric equivalent dose of maltose dextrin via oral gavage, respectively. The animals were terminated on day 7 via pentobarbital injection. The mandibles were harvested and scanned using a Nikon XTH 255L 3D-microCT scanner (Nikon Metrology, Leuven, Belgium), and biomechanical tests were done using a Shimadzu universal tensile strength testing machine (China). Following scanning and reconstruction, the trabecular morphometry was assessed using Volume Graphics Studio® software. A 3-point bending test was used to evaluate the tensile strength of the bone. Findings from our study showed changes in some trabecular parameters in the female alcohol-exposed group, while the male groups remained unaffected. No changes in tensile strength were seen when comparing male pair-fed control and alcohol-exposed groups and when comparing female pair-fed control and alcohol-exposed groups. Trabecular and tensile strength differences were observed between the sexes when comparing male pair-fed control and alcohol-exposed groups to female pair-fed control and alcohol-exposed groups. These findings do suggest that acute binge alcohol consumption has detrimental effects on the bone micro-architecture in female alcohol-exposed rats and that differences are seen between the sexes.

El consumo de alcohol entre menores de edad se ha convertido en una importante preocupación pública que tiene un impacto negativo en el crecimiento y desarrollo del esqueleto. La masa ósea máxima se alcanza durante la adolescencia, por lo que el objetivo del estudio fue investigar el efecto del consumo excesivo de alcohol en forma aguda sobre la morfometría trabecular y la resistencia a la tracción de la mandíbula en ratas adolescente Sprague Dawley (SD). El estudio estuvo compuesto por 24 ratas, de 7 semanas de edad, colocadas en el grupo control expuesto al alcohol [n=12 (6 machos y 6 hembras)] y alimentado en parejas [n=12 (6 machos y 6 hembras)]. El tratamiento de los grupos fue el siguiente; al grupo expuesto al alcohol y al control alimentado en parejas se les administró una dosis única diaria de 3 g/kg de alcohol al 20 % 3 días a la semana (días alternos) durante 7 días y una dosis equivalente calórica de maltosa dextrina mediante sonda oral, respectivamente. Los animales fueron sacrificados el día 7 mediante inyección de pentobarbital. Las mandíbulas se recolectaron y se escanearon utilizando un escáner 3D-microCT Nikon XTH 255L (Nikon Metrology, Lovaina, Bélgica), y las pruebas biomecánicas se realizaron utilizando una máquina de prueba de resistencia a la tracción universal Shimadzu (China). Después del escaneo y la reconstrucción, la morfometría trabecular se evaluó utilizando el software Volume Graphics Studio®. Se utilizó una prueba de flexión de 3 puntos para evaluar la resistencia a la tracción del hueso. Los hallazgos de nuestro estudio mostraron cambios en algunos parámetros trabeculares en el grupo de hembras expuestas al alcohol, mientras que los grupos de machos no se vieron afectados. No se observaron cambios en la resistencia a la tracción al comparar los grupos control de machos alimentados en parejas y los grupos expuestos al alcohol y al comparar los grupos control de las hembras alimentadas en parejas y los grupos expuestos al alcohol. Se observaron diferencias trabeculares y de resistencia a la tracción entre los sexos al comparar los grupos control de los machos alimentados en parejas y expuestos al alcohol con los grupos de control de hembras alimentadas en parejas y expuestas al alcohol. Estos hallazgos sugieren que el consumo excesivo de alcohol tiene efectos perjudiciales sobre la microarquitectura ósea en ratas hembras expuestas al alcohol y que se observan diferencias entre los sexos.

Relación del plano oclusal con la altura del ángulo goníaco y proyección del mentón / Relation of the occlusal plane with the height of the gonial angle and projection of the chin

Introducción: hemos observado en nuestra práctica ortodóncica una gran cantidad de pacientes con plano oclusal inclinado, con un ángulo goníaco alto y postero-rotación mandibular. Todo parece indicar que el plano oclusal juega un papel muy importante en el desarrollo de las maloclusiones. Objetivo: mostrar en el presente caso clínico de un niño, si existe una correlación entre la inclinación del plano oclusal, la altura del ángulo goníaco, la longitud de la rama mandibular y la proyección del mentón antes y después, al corregirlo y hacerlo más horizontal con tratamiento ortodóncico. Caso clínico: paciente masculino de 11 años de edad, hiperdivergente, clase II esquelética severa, perfil convexo, apiñamiento dental superior e inferior, clase II molar, incompetencia labial severa, mordida profunda, overjet aumentado, mentón retrusivo, cervicales rectificadas y anterorotación de cabeza. El tratamiento de ortodoncia se realizó con brackets Roth slot 22 y extracciones de primeros premolares superiores e inferiores y primeros molares superiores (siendo reemplazados por los terceros molares superiores), curvas inversas, cierre de espacios con pérdida de anclaje y ajuste oclusal. Resultados: al finalizar el tratamiento, se logró mejorar la estética facial, un ángulo goníaco más desarrollado con mayor crecimiento vertical, mayor proyección del mentón, un plano oclusal más horizontal, un adecuado overbite y overjet, clase I molar y canina, antero-rotación mandibular, buena intercuspidación, oclusión funcional y excelente estabilidad oclusal sin retención, mejoría en lordosis cervical y posición de la cabeza. Conclusiones: la corrección de un plano oclusal inclinado en niños y adolescentes hiperdivergentes, puede mejorar de manera importante el vector de crecimiento, ayudar a un mayor desarrollo en la altura del ángulo goníaco y longitud de la rama mandibular, proyección del mentón al corregirlo y hacer el plano oclusal más horizontal con la mecánica ortodóntica de curvas inversas; por lo tanto, en el presente caso clínico: sí existe una correlación muy importante entre la inclinación del plano oclusal, la altura del ángulo goníaco y la proyección del mentón antes y después del tratamiento ortodóncico (AU)

Introduction: we have observed in our orthodontic practice a large number of patients with inclined occlusal plane, with a high goniac angle and posterior mandibular rotation. Everything seems to indicate that the occlusal plane plays a very important role in the development of malocclusions. Objective: to show in the present clinical case of a child, if there is a correlation between the inclination of the occlusal plane, the height of the goniac angle, the length of the mandibular branch and the projection of the chin before and after, when correcting it and making it more horizontal with orthodontic treatment. Case report: an 11 year old male patient, hyperdivergent, severe skeletal class II, convex profile, upper and lower dental crowding, molar class II, severe labial incompetence, deep bite, increased overjet, retrusive chin, rectified cervicals, and anterorotation of the head. Orthodontic treatment was performed with Roth slot 22 brackets and extractions of upper and lower first premolars and upper first molars (being replaced by upper third molars), inverse curve, space closure with loss of anchorage and occlusal adjustment. Results: at the end of the treatment, it was possible to improve facial aesthetics, a more developed gonial angle with greater vertical growth, greater chin projection, a more horizontal occlusal plane, an adequate overbite and overjet, molar and canine class I, mandibular anterorotation, good intercuspidation, functional occlusion and excellent occlusal stability without retention, improvement in cervical lordosis and head position. Conclusions: the correction of an inclined occlusal plane in hyperdivergent children and adolescents can significantly improve the growth vector, help further development in the height of the gonial angle and length of the mandibular ramus, chin protection when correcting it and making the most horizontal occlusal plane with the orthodontic mechanics of inverse curves; therefore, in the present clinical case: there is a very important correlations between the inclination of the occlusal plane, the height of the gonial angle and chin projection before and after orthodontic treatment (AU)

Queratoquiste: Expresión clínica mandibular atípica en un caso clínico / Keratocyst: mandibular expression in a clinical case

El queratoquiste odontogénico constituye del 3 a 11% de los quistes odontogénicos. Se presenta desde la infancia hasta la vejez con mayor incidencia en hombres. La mandíbula está involucrada en el 60% al 80% de los casos, con una frecuencia en cuerpo y rama. Las lesiones de menor tamaño suelen ser asintomáticos, diagnosticados por examen radiográfico, no obstante, las lesiones más grandes pueden estar asociadas con dolor y aumento de volumen. Radiográficamente se observan lesiones uniloculares o multiloculares radiolúcidas de bordes nítidos, corticalizados, asociado a un diente retenido. Se presenta caso clínico de paciente género masculino de 30 años de edad, que exhibe una expresión atípica. Manifestándose como una doble lesión de queratoquistes odontogénicos independientes entre sí, localizados en rama y cuerpo mandibular derecha, tratado en el Servicio de Cirugía Maxilofacial del Hospital San José, Santiago de Chile. Se describe diagnóstico y tratamiento quirúrgico realizado. El interés clínico del caso es la presencia de dos lesiones independientes entre sí, con el mismo diagnóstico. Presentación que nos parece fundamental reportar en la literatura científica debido a su alto alcance e impacto.

The odontogenic keratocyst represents 3 to 11% of all odontogenic cysts. It occurs from childhood to old age with a higher incidence in men. The mandible is involved in 60% to 80% of cases, with a frequency in the body and ramus. Smaller lesions are usually asymptomatic and diagnosed by radiographic examination. However, larger lesions may be associated with pain and increased volume. Radiographically, radiolucent unilocular or multilocular lesions with sharp, corticalized edges are observed, associated with an impacted tooth. A clinical case of a 30-year-old male patient, who exhibits an atypical expression, is presented. A double lesion of odontogenic keratocysts independent of each other appears, located in the right mandibular ramus and body, treated in the Maxillofacial Surgery Service of the San José Hospital, Santiago de Chile. Diagnosis and surgical treatment performed are described. The clinical interest of the case is the presence of two lesions independent of each other, with the same diagnosis. It seems fundamental to us to report it in the scientific literature due to its high scope and impact.

Variabilidad en la medición del ángulo ANB de Steiner entre estudiantes de odontología y ortodoncia. Medición del Angulo ANB de Steiner / Variability in Steiners ANB angle measurement between undergraduate dental students and postgraduate students in orthodontics

Introducción: El ángulo ANB de Steiner entrega la relación entre el maxilar y la mandíbula en sentido anteroposterior y es una de las medidas cefalométricas más aplicadas en ortodoncia. Su identificación precisa podría presentar dificultades, influyendo directamente en el posterior estudio cefalométrico, diagnóstico y plan de tratamiento. El objetivo de esta investigación fue comparar la medición del ángulo ANB de Steiner entre estudiantes de pregrado de odontología y postítulo de ortodoncia de la Facultad de Odontología de la Universidad de Chile 2020. Materiales y Métodos: Por medio del programa Adobe Photoshop CS6 (Adobe System ®), se solicitó a los estudiantes la identificación de los puntos Nasion, A y B en 5 telerradiografías laterales de cráneo. Al aplicar los criterios de inclusión y exclusión se reclutaron 15 estudiantes de cada grupo. Luego se unieron los puntos mediante trazados, se midió el ángulo ANB de Steiner y se utilizó el coeficiente de correlación intraclase (ICC) para determinar el grado de acuerdo. Resultados: Se encontró un coeficiente de correlación intraclase ICC promedio de 0.97 entre ambos grupos de estudiantes. Conclusión: No hay diferencia estadística en la determinación del ángulo ANB de Steiner entre estudiantes de pregrado de odontología y postítulo de ortodoncia.

Background: The Steiner ANB angle measures the relationship between the maxilla and mandible in the anteroposterior direction and is one of the most applied cephalometric measurements in orthodontics. Its precise identification could pose difficulties, directly influencing the subsequent cephalometric study, diagnosis and treatment plan. The aim of this research was to compare the measurement of the Steiner ANB angle between dental student and postgraduate students in orthodontics from the Faculty of Dentistry of the University of Chile 2020. Materials and Methods: Using the Adobe Photoshop CS6 program (Adobe System ®), the students were asked to identify the Nasion, A and B points in 5 lateral cephalogram of the skull. By applying the inclusion and exclusion criteria, 15 students were recruited from each group. The points were then joined by tracing, the Steiner ANB angle was measured, and the intraclass correlation coefficient (ICC) was used to determine the degree of agreement. Results: An average ICC intraclass correlation coefficient of 0.97 was found between both groups of students. Conclusion: T here is no statistical difference in the determination of the Steiner ANB angle between undergraduate students of dentistry and postgraduate students of orthodontics.

ATR-FTIR spectroscopy imaging of bone repair in mandibular laser-osteotomy.

The aim of this study was to verify the effectiveness of attenuated total reflectance-fourier transform infrared (ATR-FTIR) spectroscopy in the characterization of bone repair in mandibular osteotomy using erbium, chromium-doped yttrium, scandium, gallium and garnet (Er,Cr:YSGG) laser and multilaminate drill on each side. Two mandible bone fragments were removed from 30 rabbits, and the process of bone repair was studied immediately, 3, 7, 15, 21, and 28 days after the surgery. The histological analysis allowed detecting differences in the early stages of tissue repair after bone cutting performed with the Er,Cr:YSGG laser or multilaminate drill. The ATR-FTIR spectroscopy technique was sensitive to changes in the organic content of bone tissue repair process.

Do the number of zirconia implants and the thickness of CBCT image reconstruction affect the detection of peri-implant bone defect? A diagnostic accuracy ex vivo study.

OBJECTIVES: To evaluate the influence of multiplanar reconstruction thickness on the detection of peri-implant bone defects with a standalone zirconia implant and compare it to when another implant is in the vicinity using cone-beam computed tomography (CBCT). MATERIALS AND METHODS: Five dry human mandibles were used to create twenty implant sites in the second premolar and first molar regions. The OP300 Maxio was used to acquire CBCT images (90 kVp, 6.3 mA, 5 × 5 cm FOV, and 0.125 mm3 voxel size) before and after creating 3 mm peri-implant bone defects in the buccal aspect of the premolar region. Half of the scans featured a single zirconia implant in the premolar region, while the others had two implants in the premolar and molar regions. Three reconstruction thicknesses (0.125 mm, 1 mm, and 2 mm) were considered for the multiplanar reconstruction analyses. Five oral and maxillofacial radiologists assessed the detection of peri-implant bone defects using a 5-point scale. Diagnostic parameters were calculated and compared using Two-way ANOVA (α = .05). RESULTS: The studied factors showed no significant influence on the diagnosis of peri-implant bone defects (p > .05). Diagnostic performance was notably higher with a single implant, especially with a 2-mm reconstruction thickness (AUC = 0.88, sensitivity = 0.68, specificity = 0.94). Although the differences were not statistically significant, the results were more modest when two implants were present (AUC = 0.80, sensitivity = 0.58, specificity = 0.82). CONCLUSIONS: The presence of an adjacent zirconia implant and variations in reconstruction thickness did not influence the detection of 3 mm buccal peri-implant bone defects on CBCT images.