Self-Powered Electrochromic Readout of Potentiometric pH Electrodes.

An absorbance-based colorimetric sensor array that is self-powered by an ion-selective electrode (ISE) in a short-circuited cell is presented. As the cell voltage is maintained at zero, the potential at the ISE serves as the power generator to directly transfer its power to a potential-dependent Prussian blue (PB) film in contact with an electrolyte solution in a separate detection compartment. This allows one to activate the color change of the PB film without the need for an external power supply. The potential of the PB detection element is optimized to change color between 50 and 250 mV (vs Ag/AgCl). Because the potential originates at the ISE, it is proportional to the ion activity in the sample in agreement with the Nernst equation. In this way, a higher cation activity in the sample generates a more positive potential, which enhances the PB absorbance that serves as the analytical signal. A self-powered optical sensor array coupled to poly(vinyl-chloride)-based pH electrodes based on two different ionophores is utilized here as a model. The measuring range is tuned chemically by varying the pH of the inner filling solution of each ISE, giving a measuring range from pH 2 to 10.5. As the optical sensor is driven by a potentiometric probe, the sensor output is independent of solution ionic strength. It is successfully applied for quantitative analysis in unmodified turbid/colored samples that included red wine, coke, coffee, baking soda, and antacid. The colorimetric output correlates well with the reference method, a calibrated pH electrode. Compared to earlier systems where the cell potential is dictated by an external power source, the PB film exhibits excellent reproducibility and a rapid response time of about 44 s.