Your browser doesn't support javascript.
loading
Adsorption of per- and polyfluoroalkyl substances on biochar derived from municipal sewage sludge.
Meservey, Alexis; Külaots, Indrek; Bryant, J Daniel; Gray, Chloe; Wahl, Julia; Manz, Katherine E; Pennell, Kurt D.
Afiliação
  • Meservey A; School of Engineering, Brown University, Providence, RI, 02912, United States.
  • Külaots I; School of Engineering, Brown University, Providence, RI, 02912, United States.
  • Bryant JD; Woodard & Curran, 50 Millstone Road, Building 400, East Windsor, NJ, 08520, United States.
  • Gray C; School of Engineering, Brown University, Providence, RI, 02912, United States.
  • Wahl J; Woodard & Curran, 47 Pleasant Street, Northampton, MA, 01060, United States.
  • Manz KE; School of Engineering, Brown University, Providence, RI, 02912, United States; Department of Environmental Health Sciences, School of Public Health, University of Michigan, Ann Arbor, MI, 48109, United States.
  • Pennell KD; School of Engineering, Brown University, Providence, RI, 02912, United States. Electronic address: kurt_pennell@brown.edu.
Chemosphere ; 365: 143331, 2024 Oct.
Article em En | MEDLINE | ID: mdl-39278324
ABSTRACT
Granular activated carbon (GAC) and ion exchange resin (IXR) are widely used as adsorbents to remove PFAS from drinking water sources and effluent waste streams. However, the high cost associated with GAC and IXR generation has motivated the development of less expensive adsorbents for treatment of PFAS-impacted water. Thus, the objective of this research was to create an economically viable and sustainable PFAS adsorbent from sewage sludge. Stepwise pyrolysis at temperatures from 300 °C to 1000 °C yielded biochars whose specific surface area (SSA) and porosity increased from 41 to 148 m2/g, and from 0.062 to 0.193 cm3/g, respectively. On a per organic char basis, the SSA of the biochar was as high as 1183 m2/g, which is comparable to commercially-available activated carbons. The adsorption of perfluorooctane sulfonic acid (PFOS) on sludge biochar increased with increasing pyrolysis temperature, which was positively correlated with increasing porosity and SSA. When 1000 °C processed biochar was tested with a mixture of eight PFAS, preferential adsorption of longer carbon chain-length species was observed, indicating the importance of PFAS hydrophobic interactions with the biochar and the availability of a wide range of mesopores. The adsorption of each PFAS was dependent upon both chain length and head group, with longer chain-length species exhibiting greater adsorption than shorter chain-length species, along with greater adsorption of species with sulfonic acid head groups compared to their chain length counterparts with carboxylic acid head groups. These findings demonstrate that biochar derived from municipal solid waste can serve as a cost-effective and sustainable adsorbent for the removal of PFOS and PFAS mixtures from source waters. The circular economy benefits and waste reduction potential associated with the use of sewage sludge-derived biochar supports the development of a viable sludge-derived biochar for the removal of PFAS from water.
Assuntos
Palavras-chave

Texto completo: 1 Coleções: 01-internacional Base de dados: MEDLINE Assunto principal: Esgotos / Poluentes Químicos da Água / Carvão Vegetal / Fluorocarbonos Idioma: En Revista: Chemosphere Ano de publicação: 2024 Tipo de documento: Article País de afiliação: Estados Unidos País de publicação: Reino Unido

Texto completo: 1 Coleções: 01-internacional Base de dados: MEDLINE Assunto principal: Esgotos / Poluentes Químicos da Água / Carvão Vegetal / Fluorocarbonos Idioma: En Revista: Chemosphere Ano de publicação: 2024 Tipo de documento: Article País de afiliação: Estados Unidos País de publicação: Reino Unido