Mechanical properties of aeolian sand cemented via microbially induced calcite precipitation (MICP).

ABSTRACT

The cementation of desert aeolian sand is a key method to control land desertification and dust storms, so an economical, green and durable process to reach the binding between sand grains needs to be searched. The method based on the microbially induced calcite precipitation (MICP) appeared in recent years as a promising process that proved its efficiency. The feasibility of the MICP technique to treat aeolian sand composed by low clay content, fine particles, low water content and characterized by weak permeability was demonstrated in the present paper. The effects of initial dry density, cementation number and curing time on the permeability and strength of MICP-treated aeolian sand were investigated using permeability tests and unconfined compressive strength (UCS) tests. The microstructure of aeolian sand was observed by scanning electron microscopy (SEM) tests and X-ray diffraction (XRD), aiming to reveal the solidification principle of MICP. The tests result indicated that when the initial dry density and the cementation number rose, the hydraulic conductivity of aeolian sand decreased while the mechanical strength given by UCS values improved. When the initial dry density was 1.65 g/cm3, the curing time was 3 h and the cementation number reached 20, the hydraulic conductivity and UCS reached 0.00151 cm/s and 1050.30 kPa, respectively. With increasing curing time, the hydraulic conductivity first decreased, followed by an increase, while the UCS exhibited an up and then a downtrend. Furthermore, the correlation between UCS values and the CaCO3 content reached a high R2 value equal to 0.912, which confirmed that the cementation occurred in sandy material and governed the soil strengthening. Indeed, the calcium carbonate crystals observed by SEM and XRD enhanced the friction between particles when they wrapped around the sand grains surface, while carbonates reduced the soil permeability when filling the pores and sticking the sand particles together. Finally, the theoretical and scientific knowledge brought by the present study should help in managing sand in desert areas.