ABSTRACT
ABSTRACT Objective: To adapt the PROactive Physical Activity in COPD-clinical visit (C-PPAC) instrument to the cultural setting in Brazil and to determine the criterion validity, test-retest reliability agreement, and internal consistency of this version. Methods: A protocol for cultural adaptation and validation was provided by the authors of the original instrument and, together with another guideline, was applied in a Portuguese-language version developed by a partner research group from Portugal. The adapted Brazilian Portuguese version was then cross-sectionally administered twice within a seven-day interval to 30 individuals with COPD (57% were men; mean age was 69 ± 6 years; and mean FEV1 was 53 ± 18% of predicted) to evaluate internal consistency and test-retest reliability. Participants also completed the International Physical Activity Questionnaire (IPAQ), the modified Medical Research Council scale, the COPD Assessment Test, and Saint George's Respiratory Questionnaire to evaluate criterion validity. Results: The C-PPAC instrument showed good internal consistency and excellent test-retest reliability: "amount" domain = 0.87 (95% CI, 0.73-0.94) and "difficulty" domain = 0.90 (95% CI, 0.76-0.96). Bland & Altman plots, together with high Lin's concordance correlation coefficients, reinforced that agreement. Criterion validity showed moderate-to-strong correlations of the C-PPAC with all of the other instruments evaluated, especially with the IPAQ (rho = −0.63). Conclusions: The Brazilian Portuguese version of the C-PPAC is a reliable and valid instrument for evaluating the experience of Brazilian individuals with COPD with their physical activity in daily life.
RESUMO Objetivo: Adaptar o instrumento PROactive Physical Activity in COPD - clinical visit (C-PPAC) ao contexto cultural brasileiro e determinar a validade de critério, concordância da confiabilidade teste-reteste e consistência interna dessa versão. Métodos: Um protocolo de adaptação cultural e validação foi fornecido pelos autores do instrumento original e, juntamente com outra diretriz, foi aplicado em uma versão em português desenvolvida por um grupo de pesquisa parceiro de Portugal. A versão brasileira adaptada foi então aplicada transversalmente duas vezes, com intervalo de sete dias, em 30 indivíduos com DPOC (57% de homens; média de idade de 69 ± 6 anos; e média do VEF1 de 53 ± 18% do previsto) para avaliação da consistência interna e da confiabilidade teste-reteste. Os participantes também responderam ao International Physical Activity Questionnaire (IPAQ), à escala modificada do Medical Research Council, ao COPD Assessment Test e ao Saint George's Respiratory Questionnaire para avaliação da validade de critério. Resultados: O instrumento C-PPAC apresentou boa consistência interna e excelente confiabilidade teste-reteste: domínio "quantidade" = 0,87 (IC95%: 0,73-0,94) e domínio "dificuldade" = 0,90 (IC95%: 0,76-0,96). As disposições gráficas de Bland-Altman, juntamente com os altos coeficientes de correlação de concordância de Lin, reforçaram essa concordância. A validade de critério mostrou correlações moderadas a fortes do instrumento C-PPAC com todos os outros instrumentos avaliados, principalmente com o IPAQ (rho = −0,63). Conclusões: A versão brasileira do instrumento C-PPAC é uma ferramenta confiável e válida para avaliar a experiência de indivíduos brasileiros com DPOC em relação à sua atividade física na vida diária.
ABSTRACT
Abstract We utilize various nuclear reaction codes with the aim to guide, interpret, and support the experiments in the proton-induced production measurements of radionuclides for the development of innovative radio-pharmaceuticals. The understanding of reaction cross sections at low-intermediate energies is crucial in this context and requires the knowledge of nuclear models available in different codes, such as EMPIRE, TALYS, and FLUKA. These nuclear reaction codes serve as tool to interpret the measurement of production cross-sections and to complete the measurements with estimates of production of contaminants and/or stable isotopes that are difficult to measure. We illustrate different model calculations to simulate isotope production useful in experiments devoted to the measurement of proton-induced production of the two theranostic radio-isotopes 67Cu and 47Sc.
Resumen Utilizamos varios códigos de reacción nuclear con el objetivo de guiar, interpretar y respaldar los experimentos en las mediciones de producción de radionúclidos inducidas por protones para el desarrollo de productos radio-farmacéuticos innovadores. La comprensión de las secciones eficaces de reacción en energías intermedias bajas es crucial en este contexto y requiere el conocimiento de modelos nucleares disponibles en diferentes códigos, como EMPIRE, TALYS y FLUKA. Estos códigos de reacción nuclear sirven como herramienta para interpretar la medición de secciones eficaces de producción y para completar las mediciones con estimaciones de producción de contaminantes y / o isótopos estables que son difíciles de medir. Ilustramos diferentes cálculos de modelos para simular la producción de isótopos útiles en experimentos dedicados a la medición de la producción inducida por protones de los dos isótopos teranósticos 67Cu y 47Sc.
ABSTRACT
Abstract The cross sections of the 68Zn(p,2p)67Cu,68Zn(p,2n)67Ga and 68Zn(p,3n)66Ga reactions were measured at the ARRONAX facility by using the 70 MeV cyclotron, with particular attention to the production of the theranostic radionuclide 67Cu. Enriched 68Zn material was electroplated on silver backing and exposed to alow-intensity proton beam by using the stacked-foils target method. Since 67Cu and 67Ga radionuclides have similar half-lives and same γ-lines (they both decay to 67Zn), a radiochemical process aimed at Cu/Ga separation was mandatory to avoid interferences in γ-spectrometry measurements. A simple chemical procedure having a high separation efficiency (>99%)was developed and monitored during each foil processing, thanks to the tracer isotopes 61Cu and 66Ga.Nuclear cross sections were measured in the energy range 35-70 MeV by using reference reactions recommended by the International Atomic Energy Agency (IAEA) to monitor beam flux. In comparison with literature data a general good agreement on the trend of the nuclear reactions was noted, especially with latest measurements, but slightly lower values were obtained in case of 67Cu. Experimental results of the 68Zn(p,2p)67Cu,68Zn(p,2n)67Ga and 68Zn(p,3n)66Ga reactions were also compared with the theoretical values estimated by using the nuclear reaction code TALYS. The production yield of the theranostic radionuclide 67Cu was estimated considering the results obtained in this work.
Resumen Las secciones eficaces de las reacciones 68Zn (p, 2p) 67Cu, 68Zn (p, 2n) 67Ga y 68Zn (p, 3n) 66Ga se midieron en la instalación ARRONAX utilizando el ciclotrón 70 MeV, con especial atención a la producción del radionucleidos teranóstico 67Cu. El material enriquecido 68Zn se galvanizó sobre soporte de plata y se expuso a un haz de protones de baja intensidad utilizando un blanco de láminas apiladas. Como los radionucleidos 67Cu y 67Ga tienen periodos de semidesintegración y líneas γ similares (ambos se desintegran a 67Zn), un proceso radioquímico dirigido a la separación Cu / Ga fue obligatorio para evitar interferencias en las mediciones de espectrometría γ. Se desarrolló un procedimiento químico simple con una alta eficiencia de separación (> 99%) durante cada procesamiento de la lámina, gracias a los isótopos trazadores 61Cu y 66Ga. Las secciones eficaces nucleares se midieron en el rango de energía de 35-70 MeV utilizando reacciones de referencia recomendadas por el Organismo Internacional de Energía Atómica (OIEA) para monitorear el flujo del haz. Al comparar con los datos de la literatura, se observó una buena concordancia en general con la tendencia de las reacciones nucleares, particularmente con las últimas mediciones, pero se obtuvieron valores ligeramente inferiores en el caso de 67Cu. Los resultados experimentales de las reacciones 68Zn (p, 2p) 67Cu, 68Zn (p, 2n) 67Ga y 68Zn (p, 3n) 66Ga también se compararon con los valores teóricos estimados usando el código de reacción nuclear TALYS. El rendimiento de producción del radionucleido teranóstico 67Cu se estimó considerando los resultados obtenidos en este trabajo.
ABSTRACT
The cross sections of the 68Zn(p,2p)67Cu,68Zn(p,2n)67Ga and 68Zn(p,3n)66Ga reactions were measured at the ARRONAX facility by using the 70 MeV cyclotron, with particular attention to the production of the theranostic radionuclide 67Cu. Enriched 68Zn material was electroplated on silver backing and exposed to alow-intensity proton beam by using the stacked-foils target method. Since 67Cu and 67Ga radionuclides have similar half-lives and same γ-lines (they both decay to 67Zn), a radiochemical process aimed at Cu/Ga separation was mandatory to avoid interferences in γ-spectrometry measurements. A simple chemical procedure having a high separation efficiency (>99%)was developed and monitored during each foil processing, thanks to the tracer isotopes 61Cu and 66Ga.Nuclear cross sections were measured in the energy range 35-70 MeV by using reference reactions recommended by the International Atomic Energy Agency (IAEA) to monitor beam flux. In comparison with literature data a general good agreement on the trend of the nuclear reactions was noted, especially with latest measurements, but slightly lower values were obtained in case of 67Cu. Experimental results of the 68Zn(p,2p)67Cu,68Zn(p,2n)67Ga and 68Zn(p,3n)66Ga reactions were also compared with the theoretical values estimated by using the nuclear reaction code TALYS. The production yield of the theranostic radionuclide 67Cu was estimated considering the results obtained in this work.
Las secciones eficaces de las reacciones 68Zn (p, 2p) 67Cu, 68Zn (p, 2n) 67Ga y 68Zn (p, 3n) 66Ga se midieron en la instalación ARRONAX utilizando el ciclotrón 70 MeV, con especial atención a la producción del radionucleidos teranóstico 67Cu. El material enriquecido 68Zn se galvanizó sobre soporte de plata y se expuso a un haz de protones de baja intensidad utilizando un blanco de láminas apiladas. Como los radionucleidos 67Cu y 67Ga tienen periodos de semidesintegración y líneas γ similares (ambos se desintegran a 67Zn), un proceso radioquímico dirigido a la separación Cu / Ga fue obligatorio para evitar interferencias en las mediciones de espectrometría γ. Se desarrolló un procedimiento químico simple con una alta eficiencia de separación (> 99%) durante cada procesamiento de la lámina, gracias a los isótopos trazadores 61Cu y 66Ga. Las secciones eficaces nucleares se midieron en el rango de energía de 35-70 MeV utilizando reacciones de referencia recomendadas por el Organismo Internacional de Energía Atómica (OIEA) para monitorear el flujo del haz. Al comparar con los datos de la literatura, se observó una buena concordancia en general con la tendencia de las reacciones nucleares, particularmente con las últimas mediciones, pero se obtuvieron valores ligeramente inferiores en el caso de 67Cu. Los resultados experimentales de las reacciones 68Zn (p, 2p) 67Cu, 68Zn (p, 2n) 67Ga y 68Zn (p, 3n) 66Ga también se compararon con los valores teóricos estimados usando el código de reacción nuclear TALYS. El rendimiento de producción del radionucleido teranóstico 67Cu se estimó considerando los resultados obtenidos en este trabajo.