Congratulatory remarks for the 50th volume of Journal of Periodontal & Implant Science

No abstract available.

Cone-beam computed tomographic analysis of the alveolar ridge profile and virtual implant placement for the anterior maxilla

PURPOSE: To analyze the ridge profile of the anterior maxilla using cone-beam computed tomography and to assess the clinical significance of the ridge profile by performing virtual implant placement. METHODS: Thirty-two cone-beam computed tomography scans of anterior maxillae were included. For each tooth, a vertical line was made along the longitudinal axis, and 3 horizontal lines at 1-, 3-, and 5-mm levels below the labial bone crest were drawn perpendicularly to the vertical reference. At these levels, the thickness of the alveolar ridge (RT), and the labial (LT) and palatal bone plate (PT) were measured. Then, virtual implant placement using standard and tapered implants was performed. A generalized linear mixed model was used for statistical analysis. RESULTS: The teeth were located labially based on the proportion of LT and PT with respect to RT. At the 1-mm level, the value of LT was between 1.0±0.4 mm for central incisors and 1.3±0.6 mm for canines. A large number of teeth had area(s) with less than 1-mm-thick labial bone between the 1- and 5-mm levels below the crest. The mean PT was generally thicker than the LT in all tooth types. The greatest mean value of labial concavity was observed for canines, compared to other tooth types. Men had a greater RT than did women, but had a comparable LT. Less apical fenestration was observed when tapered implants were used. CONCLUSIONS: Most teeth in the anterior maxilla had a thin labial bone plate, with no significant difference between sexes. Tapered implants may be advantageous for the anterior maxilla.

Plagiarism

No abstract available.

Primary stability of implants with peri-implant bone defects of various widths: an in vitro investigation

PURPOSE: This study aimed to evaluate the effects of i) the extent of peri-implant bone defects and ii) the application of bone cement on implant stability with respect to the measurement direction. METHODS: In 10 bovine rib bones, 4 implant osteotomies with peri-implant bone defects of various widths were prepared: i) no defect (D0), ii) a 2-mm-wide defect (D2), iii) a 4-mm-wide defect (D4), and iv) a 8-mm-wide defect (D8). The height of all defects was 10 mm. Implant stability quotient (ISQ) values and Periotest values (PTVs) were measured after implant placement and bone cement application. RESULTS: With increasing defect width, decreased ISQs and increased PTVs were observed. Statistically significant differences were found between groups D0 and D8, D0 and D4, and D2 and D8. Prior to bone cement application, inconsistent PTVs were found in group D8 depending on the measurement direction. Bone cement increased the implant stability. CONCLUSION: Peri-implant bone deficits measuring around 50% of the implant surface compromised implant stability. Clinically, PTVs should be cautiously interpreted in implants with large peri-implant defects due to inconsistent recordings with respect to the measurement direction.

Primary implant stability in a bone model simulating clinical situations for the posterior maxilla: an in vitro study

PURPOSE: The aim of this study was to determine the influence of anatomical conditions on primary stability in the models simulating posterior maxilla. METHODS: Polyurethane blocks were designed to simulate monocortical (M) and bicortical (B) conditions. Each condition had four subgroups measuring 3 mm (M3, B3), 5 mm (M5, B5), 8 mm (M8, B8), and 12 mm (M12, B12) in residual bone height (RBH). After implant placement, the implant stability quotient (ISQ), Periotest value (PTV), insertion torque (IT), and reverse torque (RT) were measured. Two-factor ANOVA (two cortical conditions×four RBHs) and additional analyses for simple main effects were performed. RESULTS: A significant interaction between cortical condition and RBH was demonstrated for all methods measuring stability with two-factor ANOVA. In the analyses for simple main effects, ISQ and PTV were statistically higher in the bicortical groups than the corresponding monocortical groups, respectively. In the monocortical group, ISQ and PTV showed a statistically significant rise with increasing RBH. Measurements of IT and RT showed a similar tendency, measuring highest in the M3 group, followed by the M8, the M5, and the M12 groups. In the bicortical group, all variables showed a similar tendency, with different degrees of rise and decline. The B8 group showed the highest values, followed by the B12, the B5, and the B3 groups. The highest coefficient was demonstrated between ISQ and PTV. CONCLUSIONS: Primary stability was enhanced by the presence of bicortex and increased RBH, which may be better demonstrated by ISQ and PTV than by IT and RT.

Bone cement grafting increases implant primary stability in circumferential cortical bone defects

PURPOSE: Implant beds with an insufficient amount of cortical bone or a loss of cortical bone can result in the initial instability of a dental implant. Thus, the objective of this study was to evaluate the effect of bone cement grafting on implant initial stability in areas with insufficient cortical bone. METHODS: Two different circumferential defect depths (2.5 mm and 5 mm) and a control (no defect) were prepared in six bovine rib bones. Fourteen implants of the same type and size (4 mm x 10 mm) were placed in each group. The thickness of the cortical bone was measured for each defect. After the implant stability quotient (ISQ) values were measured three times in four different directions, bone cement was grafted to increase the primary stability of the otherwise unstable implant. After grafting, the ISQ values were measured again. RESULTS: As defect depth increased, the ISQ value decreased. In the controls, the ISQ value was 85.45+/-3.36 (mean+/-standard deviation). In circumferential 2.5-mm and 5-mm defect groups, the ISQ values were 69.42+/-7.06 and 57.43+/-6.87, respectively, before grafting. These three values were significantly different (P<0.001). After grafting the bone cement, the ISQ values significantly increased to 73.72+/-8.00 and 67.88+/-10.09 in the 2.5-mm and 5.0-mm defect groups, respectively (P<0.05 and P<0.001). The ISQ value increased to more than double that before grafting in the circumferential 5-mm defect group. The ISQ values did not significantly differ when measured in any of the four directions. CONCLUSIONS: The use of bone cement remarkably increased the stability of the implant that otherwise had an insufficient level of stability at placement, which was caused by insufficient cortical bone volume.

Long-term results of new deproteinized bovine bone material in a maxillary sinus graft procedure

PURPOSE: The aim of this case report is to present the longitudinal results of sinus grafting using a new demineralized bovine bone material (DBBM) in human cases. METHODS: A patient with a resorbed maxilla was treated by maxillary sinus grafting using a new deproteinized bovine bone material. After a healing period of 6.5 months, three implants were placed and restored. The patient was periodically recalled and followed up for 5 years after restoration. RESULTS: Twelve partially edentulous patients (average age, 55.7 years) were followed up. All patients had insufficient residual height in their maxillary posterior area and underwent maxillary sinus graft surgery to increase the height of their maxilla. In all, 27 fixtures were placed in the augmented bone area. On average, 8.6 months later, implants were loaded using provisional or final restorations. The observation period ranged from 27 to 75 months (average, 43.3 months), and the patients did not show any severe resorption of the graft material or any infection during this time. CONCLUSIONS: Our results show that the new DBBM is useful for a maxillary sinus graft procedure. Good healing responses as well as reliable results were obtained for an average follow-up period of 43.3 months.

The effect of peri-implant bone exposure on soft tissue healing and bone loss in two adjacent implants

PURPOSE: The purpose of this study was to evaluate the soft tissue and bone change around two adjacent implants in one-stage implant surgery. METHODS: Eleven subjects (7 males, 4 females) who were needed placement of 2 adjacent implants in the molar area were included. The two implants were placed with the platform at the level of the alveolar crest. The interproximal bone between the 2 implants was not covered with gingiva. After surgery, an alginate impression was taken to record the gingival shape and radiographs were taken to evaluate implant placement. Using a master cast, the gingival height was measured at baseline, 4 weeks, and 12 weeks. In the radiograph, the alveolar bone level was measured at the mesial and distal side of both implants at baseline and 12 weeks. RESULTS: The exposed bone was covered with gingiva at both 4 and 12 weeks. Loss of alveolar bone around implants was found in all areas. The alveolar bone level in the exposed bone area did not differ from that in the non-exposed area. CONCLUSIONS: This study showed that the alveolar bone level and gingival height around 2 adjacent implants in the exposed bone area did not differ from that in unexposed bone area.

The effect of implant drilling speed on the composition of particle collected during site preparation / 대한치주과학회지

PURPOSE: This study was aimed to evaluate the effect of implant drilling speed on the composition of particle size of collected bone debris. METHODS: Branemark System (R)drills were used to collect bone debris from 10 drilling holes (1 unit) at 1,500 rpm (Group A) and 800 rpm (Group B) in bovine mandible. After separating particles by size into > 500 microm, between 250 microm and 500 microm, and 500 microm fractions, Group B had significantly higher wet volume % (P = 0.0059) and dry volume % (P = 0.0272) than in Group A. CONCLUSIONS: The drilling speed influenced the composition of particle size in collected drilling bone debris. The drilling in 800 rpm produced the more percentage of large particles than in 1,500 rpm. However, the drilling speed didn't effect on total volume of and weight of bone debris.

The effect of non-resorbable barrier membrane on the change of buccal and lingual alveolar bone in immediate implant placement into periapically infected extraction sockets / 대한치주과학회지

PURPOSE: Many researches showed loss of alveolar bone in fresh extraction socket and even in case of immediate implant placement. The aim of this study was to evaluate the effect of non-resorbable barrier membrane on the change of buccal and lingual alveolar bone in immediate implant placement into periapically infected extraction sockets. MATERIALS AND METHODS: Immediate implants were placed into artificially induced periapical lesion of mandibular premolars after complete debridement using buccal bone defect made by a 6mm trephine bur in 4 mongrel dogs. Before flap repositioning, a non-resorbable barrier membrane was placed on the buccal defect in the experimental group. No membrane was placed in the control group. In 12 weeks after placement, the dogs were sacrificed and undecalcified histologic specimens were prepared. The vertical distance from the smooth-rough surface interface(SRI) to gingiva, 1st bone contact and bone crest were measured in buccal and lingual side. The horizontal thicknesses of gingiva and bone at 0, 1, 2 and 3 mm below SRI were measured. RESULTS: The buccal bone was resorbed more than lingual bone in both groups and there was statistical significance(p<0.05). The distances from SRI to 1st bone contact were 2.45+/-2.35 mm in experimental group and 4.49+/-3.10 mm in control group. In all vertical level, lingual bone was thicker than buccal bone(p<0.05). CONCLUSION: Buccal bone was reduced more than lingual bone in immediate implant placement into periapically infected extraction sockets. Placement of non-resorbable barrier membrane reduced the buccal bone resorption. However there was no statistical significance.

Maxillary sinus floor augmentation with anorganic bovine bone: Histologic evaluation in humans / 대한치주과학회지

PURPOSE: The aim of this report is to investigate the efficacy of anorganic bovine bone xenograft(Bio-Oss(R) ) at maxillary sinus floor augmentation. MATERIALS AND METHODS: Two male patients who missed maxillary posterior teeth were included. They were performed maxillary sinus floor augmentation using anorganic bovine bone xenograft(Bio-Oss(R) ). After 10 or 13 months, the regenerated tissues were harvested using trephine drills with 2 or 4mm diameter and non-decalcified specimens were made. The specimens were examined histologically and histomorphometrically to investigate graft resorption and new bone formation. RESULTS: Newly formed bone was in contact with Bio-Oss(R) particles directly without any gap between the bone and the particles. The proportions of newly formed bone were 23.4~25.3% in patient 1(Pt.1) and 28.8% in patient 2(Pt.2). And the proportions of remained Bio-Oss(R) were 29.7~30.2% in Pt.1 and 29.2% in Pt.2. The fixtures installed at augmented area showed good stability and the augmented bone height was maintained well. CONCLUSION: Anorganic bovine bone xenograft(Bio-Oss(R) ) has high osteoconductivity and helps new bone formation, so that it can be used in maxillary sinus floor augmentation.

The effect of chlorhexidine on reduction of viable organisms in aerosol produced by ultrasonic scaler / 대한치주과학회지

PURPOSE: The aerosol generated by ultrasonic scaler can contain bacteria or virus which can penetrate into body through respiratory systems of dentists, dental hygienist or patients. The aim of this study is to evaluate the effect of chlorhexidine digluconate as preoperative mouthrinse or lavage for ultrasonic scaler on the reduction of viable organisms in aerosol produced during periodontal treatment using ultrasonic scaler. METHODS: 30 patients with moderate chronic periodontitis were included and divided into 3 groups: Control (no preoperative mouthrinse and tap water as lavage), CHG (preoperative mouthrinse with 0.1% chlorhexidine digluconate and tap water as lavage), CHL (no reoperative mouthrinse and 0.1% chlorhexidine digluconate as lavage). Each patient received scaling or subgingival curettage for 30 min. In CHG group, mouthrinse with chlorhexidine digluconate was performed for 1 min. before treatment. Before, during and after scaling or subgingival curettage, air sampling was performed for 7 min. each (1000 L/7 min.) with trypticase-soy agar plate. Agar plates were incubated in 37degrees C aerobically. The numbers of colony-forming units (CFU) were counted and compared. RESULTS: The numbers of CFUs of the samples obtained during treatment were 97+/-14.0 in control, 73.1+/-14.9 in CHG group and 44.5+/-9.0 in CHL group. The difference among the 3 groups was determined to be statistically significant (one-way ANOVA with Bonferroni's correction, p-value: 0.0003). In contrast, the numbers of CFU of samples obtained before and after treatment were not significantly different among the groups. CONCLUSIONS: Chlorhexidine digluconate used as preoperative mouthrinse or lavage for ultrasonic scaler can reduce the microorganisms in aerosol produced during periodontal treatment using ultrasonic scaler. Less number of microorganisms were detected when chlorhexidine was used as lavage for ultrasonic scaler.

Fluorescent detection of bacteria associated with gingival sulcus epithelium / 대한치주과학회지

PURPOSE: The aim of this study was to compare the number of live and dead bacteria attached to, or within, the stratified squamous epithelium lining the tissue side of the gingival sulcus. MATERIALS AND METHODS: A total of 50 patients was examined and classified into healthy or diseased sites according to inflammatory status of the gingival tissue. The surface of stratified squamous epithelium was removed by gentle scraping of the gingival sulcus with curettes. The cells were processed in the laboratory by density-gradient centrifugation to separate the epithelial cells from the loose bacteria and debris. The LIVE/DEAD(R) BacLight(TM) Bacterial Viability Kit was applied and the specimens were observed by an epifluorescent microscope and the number of bacteria was counted. RESULTS: Live and dead bacteria were stained to green and red, irrespectively. Generally, the number of total bacteria in the diseased sites was significantly higher than in the healthy sites. The mean number of detected bacteria in the diseased sites was 58.6+/-36.0 (red bacteria 10.4+/-9.2 / green bacteria 48.2+/-30.5), while it was 1.5+/-1.7 in the healthy sites (red bacteria 0.1+/-0.3 / green bacteria 1.4+/-1.5). The percentage of red bacteria was 17.5+/-11.2% in the diseased sites and 2.0+/-5.8% in the healthy sites. CONCLUSION: The total number of bacteria in the diseased sites was significantly higher than that of the healthy sites. The ratio and the number of red bacteria were also significantly higher in the diseased sites.

Effect of resorbable membrane on immediate placement of implant in extraction socket during periradicular surgery / 대한치주과학회지

PURPOSE: The guided bone regeneration (GBR) technique is widely used in periradicular surgery. However, there is still some controversy regarding the effectiveness of GBR in promoting bone healing after periradicular surgery. The purpose of this study was to evaluate the resorbable membrane on the osteointegration of immediate implants in sites with periradicular lesion that had been removed by periradicular surgery. MATERIALS AND METHODS: Six roots of lower second premolars and 15 roots of lower third and fourth premolars of dogs were used as control and experimental teeth, respectively. Periradicular lesions were induced only in the experimental teeth. Twelve weeks later, the control and experimental teeth were extracted and implants were placed immediately. Periradicular lesions were removed with osteotomy, curettage and saline irrigation. Resorbable membranes were used in experimental group 1 but not in experimental group 2. After 12 week of healing period, the implants were clinically not mobile and showed no signs of infection. Data obtained by histomorphometric analysis were analyzed by Kruskal-Wallis test. RESULTS: The control group showed a significantly higher bone to implant contact (BIC) (74.14+/-16.18) than experimental group 1 (40.28+/-15.96) and 2 (48.70+/-17.75)(p<0.05). However, there was no significant difference between experimental group 1 and 2. CONCLUSION: Although BIC in experimental groups were lower than in control group, immediate implant can be successfully placed at extraction socket with periradicular lesion and osseous defect. However, the use of resorbable membrane in bony defect created during periradicular surgery was questioned.

The effect of PRP and fibrin sealant with the deprotenized bovine bone in the rabbit cranium

PURPOSE: The purpose of this study is to evaluation of effect on bone formation of PRP and fibrin sealant with deproteinized bovine bone(Bio-Oss) grafts on rabbit cranial defect. MATERIAL AND METHODS: Twelve rabbits were used as experimental animal Two equal 9mm diameter cranial bone defects were created in each rabbit and immediately grafted with Bio-Oss only, Bio-Oss and PRP, and Bio-Oss and Fibrin sealant. Rabbits were sacrificed at 4 and 8 week. The defects were evaluated by histomorphometric analysis. Results: Kruskal-Wallis tests were performed comparing new bone formation via histomorphometric analysis. No statistically significant difference of new bone formation was found between Bio-Oss only, Bio-Oss and PRP, and Bio-Oss and fibrin sealant at 4 and 8 weeks (P>0.05). CONCLUSION: This study fails to find a stimulatory effect of PRP and Fibrin sealant on New bone formation of Bio-Oss grafts by histomorphometric analyses.

Effect of cleansing me thods on the bone re sorption due to repeated dis/re-connection of implant abutment / 대한치주과학회지

BACKGROUND: Repeated dis/re-connection of implant abutment caused bone loss around implant fixtures due to the new formation of biologic width of the mucosal-implant barrier. The aim of this clinical study was to evaluate whether the repeated dis/re-connection of implant abutment cause bone loss clinically and the effect of cleansing methods on a bone loss during the early healing period. METHODS: A total 50 implants were installed in 20 patients and repeated dis/re-connection of abutment was performed at the time of surgery and once per week for 12 weeks. 0.9% normal saline solution as group1 and 0.1% chlorhexidine solution as group 2 was used to clean abutments. All patients had radiographs taken at the placement of implant and 4, 8, and 12 weeks postoperatively. The data for bone loss around implant were analyzed. RESULTS: The marginal bone loss at 12 weeks were 1.28+/-0.51mm, 1.32+/-0.57mm in the mesial and distal sides in group1, 1.94+/-0.75mm, 1.81+/-0.84mm in group 2, respectively. In view of marginal bone loss, there was not a significant statistical difference between groups. CONCLUSIONS: Repeated dis/re-connection of implant abutment may not cause marginal bone loss around implant fixture although limited samples and short-term observation period. In spite of more bone loss in group 2, there was no statistical significant difference between groups. In context of those results, the clinical significance of the repeated dis/re-connection of implant abutment and the cleansing method of abutments is debatable when it comes to marginal bone loss during early healing period.

A 3 year-retrospective study of survival rate in single Branemark TiUnite(TM) implant / 대한치주과학회지

BACKGROUND: TiUnite(TM) is a highly crystalline and phosphate enriched titanium oxide surface which has a unique porous surface structure. This improved implant surface enhances bone response and reduces healing period. It also assures early stability of implant. These help to increase the success of implant. The aim o f this s tudy i s to e valuate the survival r ate of TiUnite TM surfaced single implant. MATERIALS AND METHODS: A retrospective analysis of 89 TiUnite(TM) surfaced implants replacing a single tooth was assessed according to their dental record. The age of the patients ranged from 17 to 82 years (mean age: 45.8 +/- 14.6). Data were recorded regarding the survival rate of these implants. RESULTS: Fifty-two implants (57%) were placed in the maxilla, and 37 (43%) in the mandible. Over 75% were placed in the posterior area. Of the placed implants, 67% were the wide type, while 25% were the regular type and only 8% were of the narrow type. The single implants produced an overall clinical survival rate of 96.6% over the observation period (mean 17.9 months). Among 89 implants, only 2 implants were removed and one implant was submerged. CONCLUSION: According to t he se data, TiUnite(TM) surfaced implant in a single tooth restoration showed favorable survival rate although this study was done in a short term period.

The Fcgamma receptor III genotype as a risk factor for aggressive periodontitis in Korean patients / 대한치주과학회지

No abstract available.

A study on the biodegradable novel chitosan nanofiber membrane as a possible tool for guided bone regeneration / 대한치주과학회지

Chitosan has been widely researched as bone substitution materials and membranes in orthopedic/periodontal applications. Chitosan nanofiber membrane was fabricated by chitosan nanofiber using electrospinning technique. The structure of the membrane is nonwoven, three-dimensional, porous, and nanoscale fiber-based matrix. The aim of this study was to evaluate the biocompatibility of chitosan nanofiber membrane and to evaluate its capacity of bone regeneration in rabbit calvarial defect. Ten mm diameter round cranial defects were made and covered by 2 kinds of membranes (Gore-Tex membrane, chitosan nanofiber membrane) in rabbits. Animals were sacrificed at 4 weeks after surgery. Decalcified specimens were prepared and observed by microscope. Chitosan nanofiber membrane maintained its shape and space at 4 weeks. No inflammatory cells were seen on the surface of the membrane. In calvarial defects, new bone bridges were formed at all defect areas and fused to original old bone. No distortion and resorption was observed in the grafted chitosan nanofiber membrane. However bone bridge formation and new bone formation at the center of the defect could not be seen in Gore-Tex membranes. It is concluded that the novel membrane made of chitosan nanofiber by electrospinning technique may be used as a possible tool for guided bone regeneration.

Fc gammaR genetic polymorphisms of periodontal disease in Korean population / 대한치주과학회지

No abstract available.