Phospholipase D regulates ferroptosis signal transduction in mouse spleen hypoxia response

High-altitude hypoxia exposure can lead to phospholipase D-mediated lipid metabolism disorder in spleen tissues and induce ferroptosis. Nonetheless, the key genes underlying hypoxia-induced splenic phospholipase D and the ferroptosis pathway remain unclear. This study aimed to establish a hypoxia animal model. Combined transcriptomic and proteomic analyses showed that 95 predicted target genes (proteins) were significantly differentially expressed under hypoxic conditions. Key genes in phospholipase D and ferroptosis pathways under hypoxic exposure were identified by combining Gene Ontology (GO) and Kyoto Encyclopedia of Genes and Genomes (KEGG) enrichment analysis techniques. Gene set enrichment analysis (GSEA) showed that the differential gene sets of the phospholipase D and ferroptosis signaling pathways were upregulated in the high-altitude hypoxia group. The genes in the phospholipase D signalling pathway were verified, and the expression levels of KIT and DGKG were upregulated in spleen tissues under hypoxic exposure. Subsequently, the mRNA and protein expression levels of genes from the exogenous pathway such as TFRC, SLC40A1, SLC7A11, TRP53, and FTH1 and those from the endogenous pathway such as GPX4, HMOX1, and ALOX15 differentials in the ferroptosis signalling pathway were verified, and the results indicated significant differential expression. In summary, exposure to high-altitude hypoxia mediated phospholipid metabolism disturbance through the phospholipase D signalling pathway and further induced ferroptosis, leading to splenic injury.

Association between posterior tibial slope and tibial torsion angle and recurrent patellar dislocation based on the full-length CT of the lower limbs / 解剖学报

Objective To measure and compare the lateral posterior tibial slope (LPTS) , medial posterior tibial slope ( MPTS) and tibial torsion angle ( TTA) between the patients of recuiTent patellar dislocation and the heathy people, and to analyze the correlation between LPTS, MPTS and TTA and the risk factors of recuiTent patellar dislocation. Methods A total of 33 patients (44 knees) with recuiTent patellar dislocation in our hospital from July 2019 to June 2021 were selected and listed as the stud)' group. Twenty-three subjects (46 knees) who were suspected iliac vascular and lower limb vascular diseases during the same period were selected and listed as the control group. All the enrolled researchers had fulllength CT scans date of the lower limbs. Three-dimensional models were reconstructed using Mimics 21. 0 software and then imported into 3-matic software. The LPTS, MPTS and TTA were measured and compared between the two groups. Results In the study group, the LPTS, MPTS and TTA were (7. 69} 1. 42) ° , ( 10. 06} 1. 71) ° , ( 36. 42}8. 13 ) ° , respectively while the control group, the LPTS, MPTS and TTA were ( 8. 42 } 1. 65 ) ° , ( 10. 44 } 0. 86 ) ° , ( 25. 77} 3. 90 ) ° , respectively. There were no signiiicant differences in the LPTS, MPTS and TTA between different genders and sides both in the stud)' group and the control group ( P > 0. 0 5 ) . Compared with the control group, the LPTS in the stud)' group was smaller, and the difference was statistically significant (P0. 05). Compared with the control group, the TTA in the stud)' group was higher, and the difference was statistically significant (P< 0. 0 5 ) . Compared with the control group, the LPTS and MPTS in the study group were significant asymmetry, and the difference was statistically significant ( P < 0 . 0 5 ). Conclusion The lateral posterior tibial slope of patients with recurrent patellar dislocation is significantly smaller than that in the healthy people, while there is no significant difference in the medial posterior tibial slope; The tibial torsion angle of patients with recurrent patellar dislocation is significantly larger than in the healthy people; The lateral posterior tibial slope and tibial torsion angle have certain correlation with recurrent patellar dislocation, which can conduct the diagnosis of recurrent patellar dislocation.

Prediction, analysis and application of learning curve of tooth preparation for all ceramic crowns of maxillary central incisors / 北京大学学报(医学版)

OBJECTIVE@#To predict the learning curve of tooth preparation for all ceramic crowns of maxillary central incisors on phantom head simulators for graduate students participating in standardized dental resident training based on the modified Wright learning curve model, then to analyze and applicate the learning curve.@*METHODS@#Twelve graduate students participating in standardized dental resident training were selected to prepare the resin maxillary central incisors on phantom head simulators for all ceramic crowns 4 times. The results of preparation were evaluated by 3 prosthetic experts with at least 10 years' experience focusing on the reduction, contour, taper, shoulder, finish line, margin placement, adjacent tooth injury, and preparation time for tooth preparation. The learning rate of tooth preparation was calculated by scores of tooth preparation of 4 times. The learning curve of tooth preparation was predicted based on the modified Wright learning curve model. According to the criteria of standardized training skill examinations for dental residents in Beijing, 80 was taken as the qualified standard score. The minimum training times for tooth preparation to satisfy the qualified standard score (80) was calculated, to analyze the characteristics of learning curve and evaluate the effectiveness of tooth preparation.@*RESULTS@#The scores of 4 tooth preparation were 64.03±7.80, 71.40±6.13, 74.33±5.96, and 75.98±4.52, respectively. The learning rate was (106±4)%, which showed the learning curve an upward trend. There were no significant differences between the qualified standard score and the predicted scores of tooth preparation from the 5th preparation to the 13th preparation (P > 0.05). The predicted score of the 14th preparation was higher than the qualified standard score (P < 0.05).@*CONCLUSION@#The trend of the learning curve of tooth preparation for all ceramic crowns of maxillary central incisors on phantom head simulators for graduate students participating in standardized dental resident training is upward, which predicts the minimum training times higher than the qualified standard score is 14 times.

Formation of professor Mao Xiejun's thoughts on stomatological education / 中华口腔医学杂志

Professor Mao Xiejun wrote a report about dental education of China in 1935. From 1948 to 1950, he published three articles containing the educational idea of "developing dentistry into stomatology". When he served as the director of the Faculty of Dentistry of Peking University Medical School in July 1950, he proposed to rename the Faculty of Dentistry into the Faculty of Stomatology,which were approved by the Ministry of Health and the Ministry of Education of the People's Republic of China in one month. The Chinese Medical Association established the Society of Stomatology the next year. Later, dentistry was successively changed into stomatology, and medical content was integrated into dental education, which was of great significance and far-reaching influence. During the developments of the thought of stomatological education in China, Professor Mao Xiejun evidently played a pivotal role. In this paper, the formation process of the thoughts of stomatological education related to professor Mao Xiejun's contribution is elucidated through studying the archives, personal letters, and historical documents, so as to enrich the researches on the history of stomatology in China and to facilitate better understanding and promoting the development of stomatology.

Analysis of three minimally invasive methods in the treatment of the fifth metacarpal neck fracture / 中国骨伤

OBJECTIVE@#To explore the effective method of applying Chinese medicine manipulative repositioning Kirschner wire fixation for minimally invasive treatment of fractures of the neck of the fifth metacarpal.@*METHODS@#From January 2018 to November 2021, 90 patients with closed fractures of the neck of the fifth metacarpal bone were treated minimally invasively with closed repositioning Kirschner wires, all fractures AO type was type A. All patients were divided into three groups according to the mode of internal fixation involving 30 cases in the crossed Kirschner's wire group, 30 cases in the transverse Kirschner's wire group, 30 patients in the intramedullary Kirschner's wire group. By comparison, gender, age, disease duration, and preoperative neck-stem angle were not significant. The postoperative fifth metacarpal neck-stem angles, postoperative fifth metacarpophalangeal joint flexion mobility and fifth metacarpophalangeal joint extension hyperextension angles were compared among three groups. The overall clinical efficacy was evaluated according to the patient outcomes of surgery-hand/arm(POS-Hand/Arm) scoring system.@*RESULTS@#All patients had 12-month follow-up and achieved bony union without malunion. There was no significant difference in the 5th metacarpal neck-stem angle, the fifth metacarpophalangeal joint flexion angle and the fifth metacarpophalangeal joint extension hyperextension angles among three groups at 12 months after surgery(P>0.05). There was no significant difference in physical activity and symptom scores in POS-Hand/Arm scores at 12 months after surgery(P>0.05), psychological status and aesthetic score among three groups(P<0.05) and between cross and transverse Kirschner wire groups(P>0.05). The three POS-Hand/Arm total scores were statistically different(P<0.05), between the crossed and transverse(P>0.05), and the intramedullary group had the highest POS-Hand/Arm scores.@*CONCLUSION@#All three techniques of Kristener's wire fixation could achieve minimally invasive treatment, and patients have need for cosmetic and early activity, and the author recommend minimally invasive intramedullary fixation with manipulative repositioned Kristen wires as the preferred procedure.

A real-world study on the efficacy and safety analysis of paclitaxel liposome in advanced breast cancer / 中华肿瘤杂志

Objective: To explore the application and efficacy of paclitaxel liposome in the treatment of advanced breast cancer among Chinese population in the real world. Methods: The clinical characteristics of patients with advanced breast cancer who received paclitaxel liposome as salvage treatment from January 1, 2016 to August 31, 2019 in 11 hospitals were collected and retrospectively analyzed. The primary outcome was progression free survival (PFS), and the secondary outcome included objective response rate (ORR) and safety. The survival curve was drawn by Kaplan-Meier analysis and the Cox regression model were used for the multivariate analysis. Results: Among 647 patients with advanced breast cancer who received paclitaxel liposome, the first-line treatment accounted for 43.3% (280/647), the second-line treatment accounted for 27.7% (179/647), and the third-line and above treatment accounted for 29.1% (188/647). The median dose of first-line and second-line treatment was 260 mg per cycle, and 240 mg in third line and above treatment. The median period of paclitaxel liposome alone and combined chemotherapy or targeted therapy is 4 cycles and 6 cycles, respectively. In the whole group, 167 patients (25.8%) were treated with paclitaxel liposome combined with capecitabine±trastuzumab (TX±H), 123 patients (19.0%) were treated with paclitaxel liposome alone (T), and 119 patients (18.4%) were treated with paclitaxel liposome combined with platinum ± trastuzumab (TP±H), 108 patients (16.7%) were treated with paclitaxel liposome combined with trastuzumab ± pertuzumab (TH±P). The median PFS of first-line and second-line patients (5.5 and 5.5 months, respectively) were longer than that of patients treated with third line and above (4.9 months, P<0.05); The ORR of the first line, second line, third line and above patients were 46.7%, 36.8% and 28.2%, respectively. Multivariate analysis showed that event-free survival (EFS) and the number of treatment lines were independent prognostic factors for PFS. The common adverse events were myelosuppression, gastrointestinal reactions, hand foot syndrome and abnormal liver function. Conclusion: Paclitaxel liposomes is widely used and has promising efficacy in multi-subtype advanced breast cancer.

Three-dimensional finite element analysis of cement flow in abutment margin-crown platform switching / 北京大学学报(医学版)

OBJECTIVE@#To analyze the cement flow in the abutment margin-crown platform switching structure by using the three-dimensional finite element analysis, in order to prove that whether the abutment margin-crown platform switching structure can reduce the inflow depth of cement in the implantation adhesive retention.@*METHODS@#By using ANSYS 19.0 software, two models were created, including the one with regular margin and crown (Model one, the traditional group), and the other one with abutment margin-crown platform switching structure (Model two, the platform switching group). Both abutments of the two models were wrapped by gingiva, and the depth of the abutment margins was 1.5 mm submucosal. Two-way fluid structure coupling calculations were produced in two models by using ANSYS 19.0 software. In the two models, the same amount of cement were put between the inner side of the crowns and the abutments. The process of cementing the crown to the abutment was simulated when the crown was 0.6 mm above the abutment. The crown was falling at a constant speed in the whole process spending 0.1 s. Then we observed the cement flow outside the crowns at the time of 0.025 s, 0.05 s, 0.075 s, 0.1 s, and measured the depth of cement over the margins at the time of 0.1 s.@*RESULTS@#At the time of 0 s, 0.025 s, 0.05 s, the cements in the two models were all above the abutment margins. At the time of 0.075 s, in Model one, the gingiva was squeezed by the cement and became deformed, and then a gap was formed between the gingiva and the abutment into which the cement started to flow. In Model two, because of the narrow neck of the crown, the cement flowed out from the gingival as it was pressed by the upward counterforce from the gingival and the abutment margin. At the time of 0.1 s, in Model one, the cement continued to flow deep inside with the gravity force and pressure, and the depth of the cement over the margin was 1 mm. In Model two, the cement continued to flow out from the gingival at the time of 0.075 s, and the depth of the cement over the margin was 0 mm.@*CONCLUSION@#When the abutment was wrapped by the gingiva, the inflow depth of cement in the implantation adhesive retention can be reduced in the abutment margin-crown platform switching structure.

Long-term trend analysis of liver cancer survival rate in Qidong region, Jiangsu Province, 1972-2019 / 中华肝脏病杂志

Objective: To analyze the incidence and survival rate of liver cancer cases in the entire population in the Qidong region from 1972 to 2019, so as to provide a basis for prognosis evaluation, prevention, and treatment. Methods: The observed survival rate (OSR) and relative survival rate (RSR) of 34 805 cases of liver cancer in the entire Qidong region population from 1972 to 2019 were calculated using Hakulinen's method with SURV3.01 software. Hakulinen's likelihood ratio test was used for statistical analysis. Age-standardized relative survival (ARS) was calculated using the International Cancer Survival Standard. The Joinpoint regression analysis was performed with Joinpoint 4.7.0.0 software to calculate the average annual percentage change (AAPC) of the liver cancer survival rate. Results: 1-ASR increased from 13.80% in 1972-1977 to 50.20% in 2014-2019, while 5-ASR increased from 1.27% in 1972-1977 to 27.64% in 2014-2019. The upward trend of RSR over eight periods was statistically significant (χ (2) = 3045.29, P < 0.001). Among them, male 5-ASR was 0.90%, 1.80%, 2.33%, 4.92%, 5.43%, 7.05%, 10.78%, and 27.78%, and female 5-ASR was 2.33%, 1.51%, 3.35%, 3.92%, 3.84%, 7.18%, 11.45%, and 29.84%, respectively. There was a statistically significant difference in RSR between males and females (χ (2) = 45.68, P < 0.001). The 5-RSR for each age group of 25-34 years old, 35-44 years old, 45-54 years old, 55-64 years old, 65-74 years old, and 75 years old were 4.92%, 5.29%, 8.17%, 11.70%, 11.63%, and 9.60%, respectively. There were statistically significant differences in RSR among different age groups (χ (2) = 501.29, P < 0.001). The AAPC in Qidong region from 1972 to 2019 for 1-ARS, 3-ASR, and 5-ARS were 5.26% (t = 12.35, P < 0.001), 8.10% (t = 15.99, P < 0.001), and 8.96 % (t = 16.06, P < 0.001), respectively. The upward trend was statistically significant in all cases. The AAPC of 5-ARS was 9.82% in males (t = 14.14, P < 0.001), and 8.79% in females (t = 11.48, P < 0.001), and the upward trend was statistically significant in both. The AAPC of 25-34 years old, 35-44 years old, 45-54 years old, 55-64 years old, 65-74 years old, and 75 years old were 5.37% (t = 5.26, P = 0.002), 5.22% (t = 5.66, P = 0.001), 7.20% (t = 6.88, P < 0.001), 10.00% (t = 12.58, P < 0.001), 9.96% (t = 7.34, P < 0.001) and 8.83% (t = 3.51, P = 0.013), and the upward trend was statistically significant. Conclusion: The overall survival rate of registered cases of liver cancer in the Qidong region's entire population has greatly improved, but there is still much room for improvement. Hence, constant attention should be paid to the study on preventing and treating liver cancer.

A historical review of dental schools founded by dentist Situ Bo in modern time / 中华口腔医学杂志

About 8 dental schools were founded by Chinese dentists during modern times (1909-1949) in China. Only one still worked after the founding of the People's Republic of China, which was one of the three dental schools founded by dentist Situ Bo. There were no systematic researches on Situ Bo's participation in dentistry education. This paper analyzes the founder's experience in dentistry and in the two schools he founded at the beginning, focusing on the background and process of the schools' construction, management, teaching, teachers and students training, etc. The results show that the establishment of the first two dental schools have laid important foundation for the establishment and development of Shanghai Dental College by the reserve of trained professional teachers and accumulated valuable experience in running schools. The systematic review of this history will help us better understand the establishment and development of Shanghai Dental College and the efforts in dentistry education made by dentists growed up in modern China, as well as the early development process of stomatology.

Chinese multidisciplinary expert consensus on the management of adverse drug reactions associated with savolitinib / 中华肿瘤杂志

MET gene is a proto-oncogene, which encodes MET protein with tyrosine kinase activity. After binding to its ligand, hepatocyte growth factor, MET protein can induce MET dimerization and activate downstream signaling pathways, which plays a crucial role in tumor formation and metastasis. Savolitinib, as a specific tyrosine kinase inhibitor (TKI) targeting MET, selectively inhibits the phosphorylation of MET kinase with a significant inhibitory effect on tumors with MET abnormalities. Based on its significant efficacy shown in the registration studies, savolitinib was approved for marketing in China on June 22, 2021 for the treatment of advanced non-small cell lung cancer with MET 14 exon skipping mutations. In addition, many studies have shown that MET TKIs are equally effective in patients with advanced solid tumors with MET gene amplification or MET protein overexpression, and relevant registration clinical studies are ongoing. The most common adverse reactions during treatment with savolitinib include nausea, vomiting, peripheral edema, pyrexia, and hepatotoxicity. Based on two rounds of extensive nationwide investigations to guide clinicians, the consensus is compiled to use savolitinib rationally, prevent and treat various adverse reactions scientifically, and improve the clinical benefits and quality of life of patients. This consensus was prepared under the guidance of multidisciplinary experts, especially including the whole-process participation and valuable suggestions of experts in Traditional Chinese Medicine, thus reflecting the clinical treatment concept of integrated Chinese and western medicines.

Clinical outcome of single posterior implant-supported monolithic zirconia crowns fabricated using full digital workflow and conventional workflow: a 3-year follow-up / 中华口腔医学杂志

Objective: To compare the clinical performance of posterior single implant-supported monolithic zirconia crowns fabricated by full digital workflow and that of those fabricated by conventional workflow. Methods: This is prospective clinical research. Thirty-five patients who participated in a previous study during August 2017 to October 2018 at Department of Prosthodontics, Peking University School and Hospital of Stomatology were included in this 3-year follow-up study. The 35 patients, 17 females and 18 males, aged (49.0±15.4) years (24-86 years old), was allocated into two groups. In the full digital workflow group, intraoral scanning was taken immediately after implant placement, and a full zirconia implant crown was fabricated using model-free computer aided design/computer aided manufacturing (CAD/CAM) procedure (n=14). In the conventional group, a conventional impression was taken 3 months after implant placement and the stone model was produced. A full zirconia implant crown was fabricated using conventional model-based procedure (n=21). Three years following crown delivery, all the prostheses were evaluated in the aspect of color, surface roughness, contour and marginal integrity using modified US Public Health Service criteria (MUSPHS criteria). The soft and hard tissue around implant was evaluated using modified plaque index, probing depth (PD), number of implants with bleeding on probing, marginal bone loss (MBL). The biological and mechanical complication were also recorded. Statistical analysis was performed using independent samples t test, Mann-Whitney U test and Fisher's exact test. Results: The total survival rate of prosthesis and implant was 100% (35/35). No significant difference in MUSPHS criteria ratings on color, surface roughness, contour and marginal integrity of these crowns were found between the full digital workflow group and the conventional group (P>0.05). Sixteen out of the 35 crowns had a contour score of B due to loss of interproximal contact. Ten out of the 35 crowns had the screw hole sealing resin sinking or falling off, four in the full digital workflow group and six in the conventional group. There was no significant difference in the rate of prostheses mechanical complications between the two groups (P=1.000). For all the implants, there was no significant difference in MBL, PD, the modified plaque index, and number of implants with bleeding on probing between the two groups (U=119.50,133.00,142.50, t=-0.53, P>0.05). Conclusions: The clinical performance of implant-supported posterior single monolithic zirconia crowns fabricated by full digital workflow was stable. There was no significant difference in the clinical performance of the single implant crowns between the full digital workflow group and the conventional group.

Application and research progress of digital virtual simulated design in dental esthetic rehabilitation / 中华口腔医学杂志

In dental esthetic rehabilitation, patients pay great attention to the rehabilitative esthetic effect before teeth preparation, and this is also an important content of doctor-patient communication. Along with the development and combined application of intraoral scan, three-dimensional (3D) face scan, digital design, numerical control machining and 3D printing technology, digital technology is gradually applied to the virtual simulated design before irreversible operation in dental esthetic rehabilitation. Digital technology can be used in dentistry to simulate the esthetic outcome in advance, to assist communication among the dentists, patients and dental technicians, and to realize satisfactory outcome in the final restorations precisely, which, as a result, increases the clinical satisfaction. This review focuses on the application of digital virtual simulated design technology in dental esthetic rehabilitation, analyzes the current research development, deficiency and future prospects, so as to provide guidance for clinical diagnosis and treatment.

Research progress on Astragali Radix and prediction of its quality markers (Q-markers) / 中国中药杂志

Astragali Radix, a medicinal herb for invigorating Qi, has anti-aging, anti-tumor, immunoregulatory, blood sugar-and lipid-lowering, anti-fibrosis, anti-radiation and other pharmacological effects. This article reviewed the studies about the chemical components and pharmacological effects of Astragali Radix. According to the theory of quality markers(Q-markers) of Chinese medicinal materials, we predicted the Q-markers of Astragali Radix from traditional efficacy, chemical component validity, measurability, plant phylogeny, and pharmacokinetis. The results showed that total polysaccharides, flavonoids(e.g., calycosin-7-O-β-D-glucoside, formononetin, calycosin, quercetin, and ononin), and saponins(e.g., astragalosides Ⅱ, Ⅲ, and Ⅳ) can be taken as the main Q-markers. This review lays a foundation for regulating the quality research and standard establishment of Astragali Radix, and benefits the control and quality supervision of the production process of Astragali Radix and its related products.

Preliminary clinical application verification of complete digital workflow of design lips symmetry reference plane based on posed smile / 北京大学学报(医学版)

OBJECTIVE@#To automatically construct lips symmetry reference plane (SRP) based on posed smile, and to evaluate its advantages over conventional digital aesthetic design.@*METHODS@#Eighteen subjects' three-dimensional facial and dentition data were gathered in this study. The lips SRP of experimental groups were used with the standard weighted Procrustes analysis (WPA) algorithm and iterative closest point (ICP), respectively. A reference plane defined by experts based on regional ICP algorithm, served as the truth plane. The angle error values between the lips SRP of WPA algorithm in the experimental groups and the truth plane were evaluated in this study, and the lips SRP of ICP algorithm of the experimental groups was calculated in the same way. The lips SRP based on posed smile as a reference for aesthetic design and evaluate preliminary clinical application.@*RESULTS@#The average angle error between the lips SRP of WPA algorithm and the truth plane was 1.78°±1.24°, which was smaller than that between the lips SRP of ICP and the truth plane 7.41°±4.31°. There were significant differences in the angle errors among the groups (P < 0.05). In the aesthetic design of anterior teeth, automatically constructing the lips SRP of WPA algorithm based on posed smile and the original symmetry plane by re-ference compared with the prosthetic design, the subjects' scores on the lips SRP of WPA algorithm based on posed smile (8.48±0.57) were higher than those on the original symmetry plane (5.20±1.31).@*CONCLUSION@#Automatically constructing the lips SRP of WPA algorithm based on posed smile was more accurate than ICP algorithm, which was consistent with the truth plane. Moreover, it can provide an important reference for oral aesthetic diagnosis and aesthetic analysis of the restoration effect. In the aesthetic design of anterior teeth, automatically constructing the lips SRP of WPA algorithm based on posed smile can improve the patients' satisfaction in esthetic rehabilitation.

Finite element analyses of retention of removable partial denture circumferential clasps manufactured by selective laser melting / 北京大学学报(医学版)

OBJECTIVE@#To compare the retentions of different designs of cobalt-chromium (Co-Cr), pure titanium (CP Ti), and titanium alloy (Ti-6Al-4V) removable partial denture (RPD) circumferential clasps manufactured by selective laser melting (SLM) and to analyze the stress distribution of these clasps during the removal from abutment teeth.@*METHODS@#Clasps with clasp arm size A (1.9 mm width/1.1 mm thickness at the body and 0.8-taper) or B (1.2 times A) and 0.25 mm or 0.50 mm undercut engagement were modeled on a prepared first premolar die, named as designs A1, A2, A3, and A4, respectively. The density and elastic modulus of SLM-built Co-Cr, CP Ti, and Ti-6Al-4V were measured and given to different groups of clasps. The density, elastic modulus, and Poisson ' s ratio of enamel were given to the die. The control group was the cast Co-Cr clasp with design A1, to which the density and elastic modulus of cast Co-Cr alloy were given. The Poisson's ratio of all metals was 0.33. The initial 5 N dislodging force was applied, and the maximum displacement of the clasp along the insertion path was computed. The load was reapplied with an increment of 5 N than in the last simulation until the clasp was completely dislodged. The retentive force range of different groups of clasps was obtained. The retentive forces of the SLM-built Co-Cr, CP Ti, and Ti-6Al-4V clasps with equivalent computed retentive force range to the control group were validated through the insertion/removal experiment. The von Mises stress distributions of these three groups of SLM-built clasps under 15 N loads were analyzed.@*RESULTS@#SLM-built Co-Cr, CP Ti, and Ti-6Al-4V clasps with designs B1 or B2, and Co-Cr clasps with design A2 had higher retentive forces than those of the control group. SLM-built CP Ti and Ti-6Al-4V clasps with design A1 had lower retentive forces than those of the control group. SLM-built Co-Cr clasp with design A1 and SLM-built CP Ti and Ti-6Al-4V clasps with design A2 had equivalent retentive forces to those of the control group. The insertion/removal experiment showed that the measured retentive forces of these three groups of SLM-built clasps were (21.57±5.41) N, (19.75±4.47) N, and (19.32±2.04) N, respectively. No statistically significant measured retentive force difference was found among these three groups of SLM-built clasps (P>0.05). The maximum von Mises stress of these three groups of SLM-built clasps exceeded their responding yield strength except for the Ti-6Al-4V one.@*CONCLUSION@#SLM-built Co-Cr circumferential clasps had higher retention than CP Ti and Ti-6Al-4V ones with the same clasp arm size and undercut engagement. The retention of SLM-built circumferential clasps could be adjusted by changing the undercut engagement and clasp arm size. If SLM-built circumferential clasps are used in clinical practice, the Ti-6Al-4V clasp with clasp arm size A and 0.50 mm undercut engagement is recommended considering the long-term use of RPD in the patient's mouth.

Treatment of chronic refractory wound with autologous platelet-rich plasma in a hemophilia A patient after knee joint surgery / 中华烧伤杂志

On December 22, 2017, a 35-year-old male hemophilia A patient with a secondary chronic refractory wound after left knee joint surgery was transferred from the Department of Hematology of Maoming People's Hospital to the Department of Burns and Plastic Surgery in the same hospital. The physical examination revealed that the patient's left knee joint was swollen, with a full-thickness skin defect wound of 4 cm×4 cm on the lateral side of the joint and a large number of dark red blood clots at the bottom of the wound. The wound bleeding was controlled by intravenous infusion of plasma, cryoprecipitate, and human coagulation factor Ⅷ. After con- ventional debridement and dressing changes until the wound infection was controlled and necrotic tissue was removed, a subcutaneous cavity wound of 2 cm×2 cm in area and 3 cm in depth remained in the left knee joint and was difficult to heal. Nineteen days after transfer, the patient received autologous platelet-rich plasma (PRP) treatment, and 32 days after PRP treatment, the wound in left knee joint was healed with epithelialization. This case suggests that autologous PRP therapy would be a good option for hemophilia complicated chronic refractory wounds when they could not be repaired by surgery.

Formulation regularity of traditional Chinese medicine in treatment of sinusitis based on data mining / 中国中药杂志

Based on the Drugdataexpy and the prescription modern application database, this study explored the formulation regularity of ancient and modern prescriptions for the treatment of sinusitis. The Chinese medicinal prescriptions for the treatment of sinusitis with various syndromes were retrieved from the above databases and the corresponding formulation regularity was investigated by frequency analysis, association rule analysis, and factor analysis. Eighty-seven Chinese medicinal prescriptions were included, involving five syndrome types of sinusitis and 160 Chinese medicine, which were mainly effective in releasing exterior, clearing heat, and tonifying deficiency, and acted on the lung meridian due to cold and warm nature and pungent and bitter flavor or on the spleen meridian due to warm nature and pungent flavor. Seventeen core Chinese medicine were screened out by topological data analysis, including Angelicae Dahuricae Radix, Magnoliae Flos, Glycyrrhizae Radix et Rhizoma, Xanthii Fructus, and Scutellariae Radix. Chinese medicine such as Magnoliae Flos, Angelicae Dahuricae Radix, and Xanthii Fructus were commonly used in the treatment of sinusitis of wind-heat in the lung meridian, while the combination of Glycyrrhizae Radix et Rhizoma, Magnoliae Flos, Angelicae Dahuricae Radix, Chuanxiong Rhizoma, etc. was the key compatibility in treating sinusitis of dampness-heat in the spleen and stomach. Six common factors were extracted from the factor analysis of the above two syndrome types. The findings indicate that the exterior-releasing, heat-clearing, and deficiency-tonifying Chinese medicine with cold and warm nature and pungent flavor are preferential options for the clinical treatment of sinusitis. Treatment should be based on syndrome differentiation and key therapeutic principles should be followed.

Analysis of early and middle stage efficacy and complications of oblique lumbar interbody fusion in treating degenerative lumbar diseases / 中国骨伤

OBJECTIVE@#To investigate the early and middle stage efficacy and complications of minimally invasive extraperitoneal oblique lumbar interbody fusion (OLIF) in the treatment of degenerative lumbar diseases.@*METHODS@#The clinical data of 22 patients with degenerative lumbar diseases underwent OLIF from October 2017 to March 2019 were retrospectively analyzed, including 14 males and 8 females, aged from 51 to 72 years with an average of (63.15±7.22) years. There were 6 cases of lumbar spinal stenosis, 5 cases of lumbar spondylolisthesis, 4 cases of adjacent vertebral disease, 3 cases of degenerative lumbar scoliosis, 3 cases of discogenic low back pain, and 1 case of recurrence after posterior lumbar decompression. Posterior minimally invasive pedicle screw fixation was performed in 13 cases and Stand-alone fixation in 9 cases. Intraoperative blood loss, operation time, postoperative drainage volume, landing time were recorded. The intervertebral disc height(IDH), intervertebral foramen height(IFH), intervertebral foramen area( IFA), canal diameter(CD), canal area(CA) were measured before and after operation. The imaging changes (including location of fusion cage, interbody fusion, and cage subsidence) and complications were observed. Oswestry Disability Index (ODI), numerical rating scales (NRS) and Japanese Orthopaedic Association (JOA) scores were compared before and 3, 6, 12 months after operation.@*RESULTS@#All 22 patients successfully completed the operation. The intraoperative blood loss was 25 to 280 ml with an average of (95.45±79.07) ml and that of simple anterior approach was 25 to 70 ml with an average of (45.71±15.42) ml. The operation time was 75 to 210 min with an average of (137.72±37.66) min, and the simple anterior operation time was 75 to 105 min with an average of (91.40±15.96) min. The total drainage volume was 10 to 110 ml with an average of (56.23±31.15) ml, and the time to go down to the ground was 24 to 72 hours (54.48±18.24) hours after operation. Postoperative IDH improved (6.63±2.61)mm(P<0.05), the IFH improved (5.35±2.47)mm (P<0.05), the IFA improved (97.67±33.58)mm2(P<0.05), the CD improved (3.31±1.61) mm(P<0.05), the CA improved (57.52±31.39) mm2(P<0.05). Five patients got interbody fusion at 6 months after operation and all 22 patients got interbody fusion at 12 months after operation. There was 5 cases of fusion cage subsidence, all of which occurred in the cases without posterior fixation(using Stand-alone fixation). There was no serious complication such as big blood vessel injury, ureter injury, dural sac injury and nerve root injury. Peritoneal injury occurred in 1 case, postoperative transient thigh pain, decrease of quadriceps femoris muscle strength in 4 cases and sympathetic nerve injury in 1 case. The symptoms of lumbago and radicular pain of lower extremities were alleviated obviously 3 days after operation. The ODI, NRS and JOA scores at 6, 12 months after operation were significantly improved(P<0.05).@*CONCLUSION@#The treatment of lumbar degenerative diseases with definite indications by OLIF can achieve satisfactory clinical results, and it has advantages of less intraoperative bleeding, fast time to land, less complications, good imaging improvement and indirect decompression. But the operation time and fluoroscopy time are longer in the early stage, and complications such as peritoneal injury and lumbar plexus over traction may occur. The long-term incidence of settlement of fusion cage with Stand-alone technology is higher.

Epidemic characteristics of stomach cancer mortality in Qidong during 1972-2016 / 中华肿瘤杂志

Objective: To describe the epidemic characteristics of stomach cancer mortality in Qidong between 1972 and 2016. Methods: The cancer registry data of stomach cancer death and population during 1972-2016 in Qidong was collected. The mortality of crude rate (CR), China age-standardized rate (CASR), world age-standardized rate (WASR), 35-64 years truncated rate, 0-74 years cumulative rate, cumulative risk, percentage change (PC), annual percent change (APC) were calculated. Results: During 1972-2016, a total of 15 863 (male: 10 114, female: 5 749) deaths occurred attributed to stomach cancer, accounting for 16.04% of all cancers, with CR of 31.37/100 000 (CASR: 12.97/100 000, WASR: 21.39/100 000). The truncated rate of 35-64, cumulative rate of 0-74, and cumulative risk were 28.86/100 000, 2.54%, and 2.51%, respectively. For male, the CR, CASR, WASR were 40.53/100 000, 17.98/100 000, 30.13/100 000, respectively, and for female, the CR, CASR, WASR were 22.45/100 000, 8.52/100 000, 13.92/100 000, respectively. Age-specific mortality analysis showed that the mortality of each age group under 25-year-old group was less than 1/100 000. The CR increased with age. The 50-year-old group reached and exceeded the average mortality of the population, and more than 80-year-old group reached the peak of death. During 1972-2016 in Qidong, The PCs in CR, CASR, and WASR of stomach cancer were 55.43%, -52.02%, -43.60%. The APC were 0.54%, -2.30%, -2.08%, respectively. Period mortality analysis showed that except for the 75-year-old group, the mortality of stomach cancer decreased significantly. Conclusions: The crude mortality of stomach cancer increases slightly in Qidong, while the CASR and WASR decrease significantly. However, stomach cancer is still one of the malignant tumors that most affect health and seriously threat lives.

Long-term trend of colorectal cancer survival rate in Qidong, 1972-2016 / 中华肿瘤杂志

Objective: The survival of colorectal cancer in Qidong City, Jiangsu Province from 1972 to 2016 was analyzed to provide a basis for the evaluation of prognosis and the formulation of prevention and control measures. Methods: Colorectal cancer data were obtained from the Qidong Cancer Registration and Reporting System, and the follow-up was up to December 31, 2021. The observed survival rate (OSR) and relative survival rate (RSR) were calculated by SURV 3.01 software, and the trend test was performed by Hakulinen's likelihood ratio test. The Joinpoint regression model was used to calculate the average annual percentage change (AAPC) of survival, and the ARIMA model was used to predict the trend of colorectal cancer survival. Results: There were 8 637 new cases of colorectal cancer in Qidong from 1972 to 2016. Dividing 1972-2016 into 9 periods at 5-year intervals, the 5-year OSR from 1972-1976 to 2012-2016 increased from 21.86% to 48.86%, and the 5-year RSR increased from 26.45% to 59.91%. The increasing trend of RSR was statistically significant (χ(2)=587.47, P<0.001). From 1972 to 2016, the survival rates of colorectal cancer in different sexes in Qidong were similar, and the 5-year RSR was 44.63% for men and 44.07% for women. Since the 1990s, the 5-year OSR and RSR for men have been lower than those for women. From 1972 to 2016, the 5-year RSR of colorectal cancer in Qidong was significantly improved in the 65-74 and ≥75-year-old groups, but the survival rate of the ≥75-year-old group was still the lowest (36.78%), followed by the 35-44-year-old group ( 43.04%). The time trend showed that the overall AAPC of colorectal cancer 5-year RSR in Qidong from 1972 to 2016 was 2.50% (t=16.45, P<0.001). The upward trend of different sexes was consistent, and the increase was greater in women (AAPC for males=2.18%, AAPC for females=2.54%, both P<0.05). The 5-year RSR of colorectal cancer in each age group showed an upward trend, and the AAPCs of the 35-44, 45-54, 55-64, 65-74, and ≥75-year-old groups were 1.54%, 1.83%, 2.00%, 3.51% and 4.35%, respectively (all P<0.05). The prediction results of colorectal cancer survival rate showed that the 5-year RSR of colorectal cancer in Qidong will increase to 71.62% by 2026. Conclusions: The overall survival rate of colorectal cancer patients in Qidong has been greatly improved, but there is still room for improvement. We should continue to pay attention to the early diagnosis and early treatment of colorectal cancer.