Application of 3D printing technology in the diagnosis and treatment of valvular heart disease / 中国胸心血管外科临床杂志

@#The incidence of valvular heart disease (VHD) increases with age, and its principal therapy is valve replacement. However, in recent years, the emergence of transcatheter interventions has changed the traditional therapy, making high-risk patients of surgery see dawn of hope. 3D printing technology has developed rapidly since it was applied to the medical field in 1990. Moreover, it has been widely applied in many surgical majors via refined reduction technology. However, the application of 3D printing technology in cardiovascular surgery is still in the preliminary stage, especially in the field of VHD. This article aims to review basic principles of 3D printing technology, its advantages in the therapy of VHD, and its current status of clinical application. Furthermore, this article elaborates current problems and looks forward to the future development direction.

Application of 3D printing technology in the personalized surgery of right ventricular double outlet / 中国胸心血管外科临床杂志

@#Objective    To evaluate the clinical value of three-dimensional (3D) printing model in accurate and minimally invasive treatment of double outlet right ventricle (DORV). Methods    From August 2018 to August 2019, 35 patients (22 males and 13 females) with DORV aged from 5 months to 17 years were included in the study. Their mean weight was 21.35±8.48 kg. Ten patients who received operations guided by 3D printing model were allocated to a 3D printing model group, and the other 25 patients who received operations without guidance by 3D printing model were allocated to a non-3D printing model group. Preoperative transthoracic echocardiography and CT angiography were performed to observe the location and diameter of ventricular septal defect (VSD), and to confirm the relationship between VSD and double arteries. Results    The McGoon index of patients in the 3D printing model group was 1.91±0.70. There was no statistical difference in the size of VSD (13.20±4.57 mm vs. 13.40±5.04 mm, t=−0.612, P=0.555), diameter of the ascending aorta (17.10±2.92 mm vs. 16.90±3.51 mm, t=0.514, P=0.619) or diameter of pulmonary trunk (12.50± 5.23 mm vs. 12.90±4.63 mm, t=−1.246, P=0.244) between CT and 3D printing model measurements. The Pearson correlation coefficients were 0.982, 0.943 and 0.975, respectively. The operation time, endotracheal intubation time, ICU stay time and hospital stay time in the 3D printing model group were all shorter than those in the non-3D printing model group (P<0.05). Conclusion    The relationship between VSD and aorta and pulmonary artery can be observed from a 3D perspective by 3D printing technology, which can guide the preoperative surgical plans, assist physicians to make reasonable and effective decisions, shorten intraoperative exploration time and operation time, and decrease the surgery-related risks.

Intermittent vibrations accelerate fracture healing in sheep

Abstract Purpose: To investigate the effect of intermittent vibration at different intervals on bone fracture healing and optimize the vibration interval. Methods: Ninety sheep were randomized to receive no treatment (the control group), incision only (the sham control group), internal fixation with or without metatarsal fracture (the internal fixation group), and continuous vibration in addition to internal fixation of metatarsal fracture, or intermittent vibration at 1, 2, 3, 5, 7 and 17-day interval in addition to internal fixation of metatarsal fracture (the vibration group). Vibration was done at frequency F=35 Hz, acceleration a=0.25g, 15 min each time 2 weeks after bone fracture. Bone healing was evaluated by micro-CT scan, bone microstructure and mechanical compression of finite element simulation. Results: Intermittent vibration at 7-day interval significantly improved bone fracture healing grade. However, no significant changes on microstructure parameters and mechanical properties were observed among sheep receiving vibration at different intervals. Conclusions: Clinical healing effects should be the top concern. Quantitative analyses of bone microstructure and of finite element mechanics on the process of fracture healing need to be further investigated.

Pharmacodynamic effect and virulent effect of Tripterygium wilfordii based on network pharmacology / 中国中药杂志

To investigate the pharmacodynamic effect and virulent effect of the main components of the toxic Chinese medicine Tripterygium wilfordii,such as triptolide,tripchlorolide,tripterine,demethylzeylasteral,wilfotrine and euonine,the admet SAR online assessment system was used to calculate the properties of the main components of T. wilfordii. The potential targets of the components were mined and collected through multiple databases,and the potential targets were enriched by the bioinformatics database DAVID.Cytoscape software was used to establish a " target-pathway" network and perform topology analysis on the network. The main chemical components of T. wilfordii were able to penetrate the blood-brain barrier and had intestinal permeability. A total of 65 targets were predicted,including pathways in cancer,hepatitis B,rheumatoid arthritis,and chagas disease( American trypanosomiasis),Toll-like receptor signaling pathway,apoptosis,colorectal cancer,NF-kappa B signaling pathway,etc. T. wilfordii mainly plays a role in the treatment of immune diseases and cancer by regulating inflammatory signaling pathways and cancer signaling pathways. Its action on apoptosis pathway and drug metabolism enzymes may be the mechanism of its toxicity.

Chemical constituents from fruits of Aristolochia mollissima and their nematicidal activity against root-knot nematode / 中国中药杂志

In the present study, in vitro nematicidal activity of chemical compositions from the methanol extract of Aristolochia mollissima fruits against the second stage juvenile (J2) of Meloidogyne javanica have been investigated. By using silica gel column chromatography, Sephadex LH-20 gel column chromatography methods, fourteen compounds were isolated from methanol extract of A. mollissima fruits. On the basis of spectral data, their structures were identified as aristolochic acid I (1), aristololactam I (2), aristololactam W (3), manshurolide (4), aristolactone (5), saropeptate (6), 2-(1-oxononadecyl)aminobenzoic acid (7), -sitosterol (8), sitostanetriol (9), daucosterol (10), formosolic acid (11), 5-ethyl-8,8-dimethyl nonanal (12), tetracosanoic acid,2,3-dihydroxypropyl ester (13) and tetracosanoic acid (14), respectively. It is the first time that compounds 2-4, 6-7, 9-14 are separated from A. mollissima. Furthermore, nematicidal activity of fourteen monomer compounds against J2 Meloidogyne javanica in vitro were analyzed. The compounds 1-3, 6-7 exhibited different degrees toxic effects on J2 M. javanica in vitro, especially for aristolochic acid I (1), aristololactam I (2), aristololactam W (3) with the LC₅₀ values of 45.25, 36.56, 119.46 mg·L⁻¹ after 96 h. So, A. mollissima have the potential value of developing new plant source to control root nematodes.

Effect of pre-emulsified sesame oil on physical-chemical and rheological properties of pork batters

Abstract Physical-chemical and rheological properties of pork batters as affected by replacing pork back-fat with pre-emulsified sesame oil were investigated. Replacement of pork back-fat with pre-emulsified sesame oil, improved L* value, moisture and protein content, hardness, cohesiveness, and chewiness, declined a* value, fat content and energy, but not affect cooking yield. When used pre-emulsified sesame oil to replace pork back-fat 50%, the sample had the highest L* value and texture. According to the results of dynamic rheological, replaced pork back-fat by pre-emulsified sesame oil increased the storage modulus (G') values at 80 °C, and formed firm gel. The result of Low-field nuclear magnetic resonance (LF-NMR) shown that the batters with pre-emulsified sesame oil had higher water holding capacity than the control. Overall, the batters with pre-emulsified sesame oil enabled lowering of fat and energy contents, making the pork batter had better texture.

High expression of thrombin receptor PAR1 in peritumoral liver tissue is associated with poor survival after curative resection of hepatocellular carcinoma in early stage / 中华肝脏病杂志

<p><b>OBJECTIVE</b>To evaluate the relationship between PAR1 (Protease-Activated Receptor 1) expression and the clinicopathologic features and to investigate the prognostic value of PAR1 expression in hepatocellular carcinoma (HCC) in early stage after curative resection.</p><p><b>METHODS</b>Real-time PCR was used to detect PAR1 expression in 41 pairs of tumors and matched peritumoral samples of HCC in early stage. Prognostic value of PAR1 mRNA expression was evaluated. Meanwhile, another 49 tissue paraffin slices of HCC were tested using immunohistochemistry (Envision) and the prognostic value of PAR1 expression and other clinicopathologic factors were evaluated.</p><p><b>RESULTS</b>Peritumoral PAR1 mRNA expression was significantly increased in HCCs from the patients with tumor recurrence as compared with those without recurrence (P < 0.05). Peritumoral PAR1 protein expression was related to tumor differentiation (P < 0.05). Kaplan-Meier analysis showed that Peritumoral PAR1 protein expression was associated with the overall survival (OS) (P < 0.05) of HCC patients and the time to recurrence (TTR) (P < 0.05). The 1, 3 and 5 -year overall survival time and the cumulative recurrence time in the high PAR1 protein expression group were significantly lower as compared to the low PAR1 expression group in the peritumoral liver tissue.</p><p><b>CONCLUSIONS</b>Peritumoral PAR1 expression is closely associated with the prognosis of early stage HCC patients after curable surgery. PAR1 may be involved in thrombin-mediated invasion process and may be used as a prognostic marker for HCC.</p>

Identification of metastasis-related microRNAs of hepatocellular carcinoma in hepatocellular carcinoma cell lines by quantitative real time PCR / 中华肝脏病杂志

<p><b>OBJECTIVE</b>To identify the metastasis-related miRNAs in hepatocellular carcinoma (HCC) cell lines.</p><p><b>METHODS</b>A qRT-PCR method was established and optimized.</p><p><b>RESULTS</b>All candidate metastasis associated miRNAs except miR-124a were expressed in high metastasis cell line MHCC97H and low metastasis cell line MHCC97L, while some miRNAs were differentially expressed between liver cancer cell line (HepG2) and hepatic cell line (L02) (P less than 0.05), these miRNAs include: miR-148b (1.96+/-0.51 vs 3.76+/-0.28), miR-9 (-4.38+/-0.86 vs -1.10+/-0.53), miR-30c (8.41+/-0.40 vs 6.82+/-0.29), miR-338 (3.14+/-0.29 vs -2.36+/-0.32), miR-34a (0.71+/-0.40 vs -2.95+/-0.26), Let-7g (-4.07+/-0.55 vs -6.98+/-0.56). miR-148b expression was about 4 times higher than miR-148a [5.46 (IQR 4.25-6.67) vs 1.29 (IQR 0.94-1.64)] in all cell line tested (Z=-5.097, P=3x10(-7)).</p><p><b>CONCLUSION</b>This study may help to understand the biological significance of miRNAs in HCC metastasis.</p>

Development of an identification method for Streptococcus oligofermentans: a new species of oral streptococci with molecular markers / 中华口腔医学杂志

<p><b>OBJECTIVE</b>To establish a quick and reliable method to identify Streptococcus oligofermentans, a new species of oral streptococci.</p><p><b>METHODS</b>With two-step PCR, a pair of the 16S rDNA-specific primers of Streptococcus oligofermentans and a pair of primers of lactate oxidase gene (lox) were used to amplify the gene fragments from the genomic DNAs of 11 strains consisting of 9 species of the pure culture of oral streptococci. Pooled plaque samples from 9 caries-free volunteers were cultured on a selective medium of MSA with erythromycin and tentative strains of Streptococcus oligofermentans were isolated. The isolates were further identified by the two-step PCR and finally confirmed by 16S rDNA sequence analysis.</p><p><b>RESULTS</b>With the two-step PCR, the two gene fragments were only amplified from the three identified strains of Streptococcus oligofermentans, but not the rest of 8 strains of oral streptococci. Isolates from the dental plaque of caries-free volunteers were identified as Streptococcus oligofermentans by PCR and then further confirmed by 16S rDNA sequence homology analysis.</p><p><b>CONCLUSIONS</b>Streptococcus oligofermentans could be identified by the two-step PCR approach with the specific 16S rDNA primers and lactate oxidase gene primers.</p>

Effect of feeding pre-L-methionine on high-cell-density fermentation for S-adenosyl-L-methionine production / 生物工程学报

The yield of S-adenosyl-L-methionine (SAM) by saccharomyces cerevisiae fermentation was affected by the strategy of feeding L-methionine. The effects that feeding strategies and the amount of precursor L-methionine had on the production of SAM by saccharomyces cerevisiae G14 were investigated. The results showed that feeding L-methionine could obviously improve the accumulation of SAM, and both the biomass and SAM yield relied heavily on different feeding strategies. In our work, it was found that total amount of L-methionine added should be no less than 0.7g per 10 grams of dry cell weight. Five different feeding strategies had been investigated in our experiment, and such comparison indicated that favorable results could be achieved as the biomass reached the status of high cell density (120g/L). If 9 grams of the precursor L-methionine was introduced once and for all, the accumulation of SAM reached maximum of 4.31g/L at the 18th hour after addition; if the precursor amino acid was fed at a rate of 2g/h in 5 h, maximum yield of 4.98g/L was achieved at the 28th hour after feeding. Thus high cell density fermentation can be successfully applied to SAM production by Saccharomyces cerevisiae with the consequence of over 130g/L of biomass gained using the above two strategies.

The aquation of oxaliplatin and the effect of acid / 药学学报

<p><b>AIM</b>To investigate the aquation of oxaliplatin in aqueous solution at different temperatures and gain the kinetic data.</p><p><b>METHODS</b>Electronic conductometry and high performance liquid chromatography (HPLC) were used to measure the oxaliplatin content in the reaction systems at different time.</p><p><b>RESULTS</b>The aquation of oxaliplatin followed a pseudo-first-order rate law. In the absence of H+, the observed rate constant kobs was 7.76 x 10(-6).min-1 and the half life t1/2 was 62 days at 25 degrees C. In the presence of H+, the aquation could be accelerated by H+ according to the equation kobs = (2.61 + 21.9 [H+]) x 10(-4).min-1. The mechanism of aquation has also been proposed in this paper. From the mechanism, the rate of aquation following to r = (k1 k2) [l-OHP]/k-1 in the absence of H+ and r = (k1 + K0k3 [H+]) [l-OHP] in the presence of H+ have been deduced, which were in perfect agreement with the experimental results.</p><p><b>CONCLUSION</b>In the absence of H+, the aqueous solution of oxaliplatin is stable, which meets to the request of clinical.</p>

Optimal Study on the Fermentation Conditions of S-adenosyl-L-methionine / 微生物学通报

This paper focuses mainly on the study of optimal fermentation conditions of S-adenosyl-L-methionine.Effects of carbon sources,nitrogen sources,inorganic constituents,growth factors and adding time of L-methionine on the yield,the content and biomass of S-adenosyl-L-methionine are studied.And ingredients of the culture medium are also optimized by the method of uniform design.The final optimum culture medium contains: glucose 30 g,Yeast powder 11 g,(NH_4)_2SO_4 12 g,K_2HPO_4?3H_2O 5 g,KH_2PO_4 10 g,MnSO_4?H_2O 0.09 g,ZnSO_4?7H_2O 0.14 g,MgCl_20.5 g,CaCl_2 0.3 g,CuSO_4 0.005 g per liter. Using that optimum culture medium,the yield of S-adenosyl-L-methionine can reach 0.9 g/L in Erlenmeyer flask which is 30 % higher than before.Experiment on 5 L fermenter reveals that the accumulation of S-adenosyl-L-methionine can reach 2.66 g/L.Biomass is 23.4 g/L.