Injertos Óseos en Quistes de los Maxilares. Reporte de un Caso

Los quistes de los maxilares son las lesiones óseas más comunes en la región maxilofacial. La enucleación de las lesiones y el cierre primario de los defectos, son en conjunto, el tratamiento óptimo hoy en día. En algunas ocasiones el defecto óseo resultante puede ser de un tamaño tan grande que afecta la estabilidad de dientes vecinos, comprometa la indemnidad del hueso o produce un retraso cicatrizal que incluso puede impedir una regeneración ósea completa. Se considera que esta falta de regeneración expone al paciente a riesgos de infección tardía, retraso de los tratamientos rehabilitadores en zonas de alta demanda estética y pérdida de vitalidad dentaria. Para disminuir el riesgo de alteraciones en la regeneración ósea completa de cavidades quísticas, se ha propuesto la posibilidad de que tras la enucleación del quiste se rellenen estos defectos con injertos óseos u otras técnicas de preservación alveolar para favorecer la cicatrización. Teóricamente el uso de estos injertos mejora la calidad y disminuye el tiempo de cicatrización ósea, permitiendo que el paciente recupere rápidamente las funciones habituales del componente dentoalveolar, acortando el periodo de cuidados postoperatorios que restringen la alimentación, los deportes o la rehabilitación oral. El actual trabajo tiene como objetivo realizar una revisión de la literatura respecto a los beneficios del uso de injertos óseos en el tratamiento quirúrgico de los quistes maxilares y presentar un caso clínico con los detalles quirúrgicos de esta técnica.

Jaw cysts are the most common bone lesions in the maxillofacial region. Enucleation of the lesions along with the primary closure of the defects are the optimal treatment nowadays. On some occasions, the resulting bone defect can be so large that it affects the stability of neighboring teeth, compromises the integrity of the bone, or produces a delayed healing that can even prevent complete bone regeneration. It is considered that the lack of regeneration exposes the patient to risk of infection, delay of rehabilitation treatments in areas of high aesthetic demand and loss of dental vitality. To reduce the risk of alterations in complete bone regeneration of cystic cavities, the possibility of filling these defects with bone grafts or other alveolar preservation techniques to promote healing, has been proposed after cyst enucleation. Theoretically, the use of these grafts improves the quality and decreases the bone healing time, allowing the patient to quickly recover the usual functions of the dentoalveolar component, limiting the period of postoperative care that restricts eating, sports or oral rehabilitation. The present work aims to carry out a review of the literature regarding the benefits of the use of bone grafts in the surgical treatment of maxillary cysts and to present a clinical case with the surgical details of this technique.

Temporal evolution of postsurgical bone repair in a rabbit model: A [99mTc]Tc-MDP scintigraphic study

Abstract Bone regeneration is crucial for repairing bone tissue following various injuries. Research techniques that enable the study of metabolic changes in bone tissue under different conditions are important for understanding bone repair and remodeling. This study used bone scintigraphy to evaluate osteogenesis secondary to osteotomy in a preclinical model of New Zealand rabbits. For this purpose, we conducted a longitudinal, prospective, case-control study in which scintigraphic variables were measured in both the right forearm (case-operated) and the left forearm (control - non-operated). The study sample consisted of 10 rabbits subjected to osteotomy, followed by a 12-week postoperative evaluation period, divided into six imaging stages at 1, 2, 3, 4, 8, and 12 weeks. We observed that the operated forearm showed significantly higher external radiation than the control side, using the pinhole collimator, denoting an increase in the biodistribution and tropism of the radiopharmaceutical to the operated forearm. Among the three evaluated time points, osteoblastic activity was highest in the second week and presented a significant decline in the 8th and 12th weeks, denoting regeneration and resolution of the surgical injury; the control forearm was also influenced by the inactivity imposed by the operated forearm. This fact was notably evidenced by the reduction in the metabolic activity of osteoblasts in the left forearm. Our study suggested that bone scintigraphy was sensitive enough to semi-quantitatively differentiate the metabolic activity of osteoblasts in the operated forearm in the three temporal landmarks evaluated in the study.

Fibroma ameloblástico mandibular: caso clínico / Fibroblastic fibroma mandibular: a clinical case

El fibroma ameloblástico (FA) se describe como una neoplasia benigna de origen odontogénico mixto que suele presentarse entre la primera y segunda década de vida, frecuentemente en los molares permanentes inferiores. Por lo general es asintomático, pero las lesiones de gran tamaño suelen acompañarse con dolor e inflamación. Su tratamiento por lo regular es conservador. Se describe el caso de un fibroma ameloblástico en un paciente de 13 años de edad, que involucraba cuerpo y ángulo mandibular izquierdo, tratado de manera conservadora, se realiza extirpación del tumor, regeneración ósea guiada y rehabilitación con implante dental (AU)

Ameloblastic fibroma (AF) is described as a benign neoplasm of mixed odontogenic origin that usually presents between the first and second decade of life, frequently in lower permanent molars. It is usually asymptomatic, but large lesions are usually accompanied by pain and inflammation. His treatment is generally conservative. The clinical case of an ameloblastic fibroma in a 13-year-old patient is described, involving the left mandibular body and angle, treated conservatively, tumor removal, guided bone regeneration and rehabilitation with dental implants are performed (AU)

Histomorphometric comparison of two different preclinical models to evaluate the bone repair in grafted areas

Aim: This study was performed to compare two different rat defect models (critical calvaria defects versus guided bone regeneration in the mandibular ramus) used to evaluate bone repair in grafted areas. Methods: A total of 12 rats were allocated in two groups according the experimental model used to evaluate the bone repair in grafted areas: a critical sized-calvaria defect of 5 mm filled with bone graft (n=6) and a mandibular ramus filled with the bone graft associated with a Teflon dome-shaped membrane (n=6). Both groups were grafted with deproteinized bovine bone graft. After 60 days, the animals were euthanized and the samples obtained were submitted to histomorphometry analysis to evaluate the relative amount of bone, remaining bone substitute, and soft tissue within the grafted areas. Results: No differences were observed between the preclinical models evaluated in relation to the amount of bone tissue formation (19.93 ± 4.55% in calvaria vs. 21.00 ± 8.20% in mandible). However, there was a smaller amount of soft tissue (43.20 ± 10.97% vs. 57.79 ± 7.61 %; p<0.01) and a greater amount of bone substitute remaining (35.80 ± 5.52% vs. 22.28 ± 4.36 %; p<0.05) in the grafted areas in the mandible compared to calvaria defect. Conclusion: Preclinical models for the analysis of bone repair in grafted areas in the mandible and critical sized-calvaria defects showed different responses in relation to the amount of soft tissue and bone substitute remnants

Validação biológica de grânulos de vidro bioativas (compostos por biovidro 45S5): estudo in vitro e in vivo / Biological validation of bioactive glass granules (composed of 45S5 bioglass): in vitro and in vivo study

O tecido ósseo, embora tenha a capacidade de regeneração, é limitado em sua eficácia diante de defeitos críticos que impedem a regeneração natural. Dessa forma, materiais como a hidroxiapatita (HA) têm sido considerados promissores na engenharia de tecido ósseo. Contudo, apesar de sua ampla utilização, a hidroxiapatita apresenta desvantagens, como a taxa de reabsorção e remodelação lenta. Em contraste, o biovidro 45S5 se destaca por sua biocompatibilidade, propriedades bioativas e degradabilidade. Este estudo objetivou avaliar o comportamento biológico in vitro e in vivo de grânulos de vidro bioativas de biovidro 45S5 fabricadas pelo método de fusão. Os biovidros foram caracterizados por meio da difração de raios X (DRX), espectroscopia de infravermelho por transformação de Fourier (FTIR), calorimetria diferencial de varredura (DSC) e espectrometria de emissão óptica com plasmas indutivamente acoplados (ICP OES). Em seguida, foi realizado o estudo in vitro, utilizando células osteoblásticas isoladas de fêmures de ratos, que foram submetidas a análise da morfologia celular (MEV), viabilidade celular (MTT), conteúdo de proteína total (PT), atividade de fosfatase alcalina (ALP) e formação de nódulos de mineralização. No estudo in vivo, foram realizados defeitos ósseos críticos de 7 mm na tíbia de coelhos da raça New Zealand, que foram divididos em dois grupos (n=6) de acordo com o material de preenchimento: hidroxiapatita comercial (HA) e biovidro 45S5 (BG45S5). Após 2, 8 e 12 semanas, os animais foram eutanasiados e as peças ósseas foram submetidas as análises histológicas e histomorfométricas. Os dados foram submetidos ao teste de normalidade Shapiro-Wilk (p=0,05) e quando normais realizamos o teste t de student e quando não normais realizamos o teste de Mann-Whitney. Os resultados dos testes físico-químicos mostraram sucesso na produção do novo biomaterial. Nos testes in vitro, observou-se que o grupo BG45S5 não apresentou citotoxicidade e mostrou-se promissor com diferença estatisticamente significante em relação ao grupo hidroxiapatita comercial (p=0.0263). Nos testes de PT, ALP e nódulos de mineralização, os grupos não apresentaram diferença estatística entre eles (p<0,05). Contudo, o grupo BG45S5 mostrou-se promissor em relação aos outros grupos. Na análise histológica, ambos os grupos apresentaram neoformação óssea nos defeitos após 2, 8 e 12 semanas. Na histomorfometria, observou-se que os grupos BG45S5 e HA apresentaram maior área de neoformação óssea em 12 semanas. Houve diferença estatisticamente significante entre os grupos no tempo de 2 semanas, com maior neoformação para o grupo BG45S5. Apesar dos resultados promissores do grupo BG45S5, não houve diferença estatisticamente significativa entre os grupos (p<0,05) nos tempos de 8 e 12 semanas. Em resumo, os resultados evidenciaram o sucesso na produção do biomaterial sintético e o potencial do biomaterial BG45S5 como um material promissor para tratamento de defeitos ósseos críticos. (AU)

Bone tissue, despite its capacity of regeneration, is limited in its effectiveness when faced with critical defects that prevent natural regeneration. Therefore, materials such as hydroxyapatite (HA) have been considered promising in bone tissue engineering. However, despite its wide use, hydroxyapatite has disadvantages, such as slow resorption and remodeling rates. In contrast, 45S5 bioglass stands out for its biocompatibility, bioactive properties and degradability. This study aimed to evaluate the in vitro and in vivo biological behavior of bioactive 45S5 bioglass beads manufactured by the melt quenched method. The bioglasses were characterized using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC) and inductively coupled plasma optical emission spectrometry (ICP OES). Following this, an in vitro study was conducted using osteoblastic cells isolated from rat femurs, which were subjected to analysis of cell morphology (SEM), cell viability (MTT), total protein content (TP), alkaline phosphatase activity (ALP) and mineralization nodule formation. In the in vivo study, critical bone defects of 7 mm were created in the tibia of New Zealand rabbits, which were divided into two groups (n=6) according to the filling material: commercial hydroxyapatite (HA) and bioactive glass 45S5 (BG45S5). After 2, 8, and 12 weeks, the animals were euthanized and the bone pieces were subjected to histological and histomorphometric analyses. Data were subjected to the Shapiro-Wilk normality test (p=0.05), and when normal, we performed the Student's t-test, and when non-normal, we performed the Mann-Whitney test. The results of the physicochemical tests showed success in the production of the new biomaterial. In the in vitro tests, it was observed that the BG45S5 group did not present cytotoxicity and showed promise with a statistically significant difference compared to the commercial hydroxyapatite group (p=0.0263). In the TP, ALP and mineralization nodule tests, the groups showed no statistical difference between them (p<0.05). However, the BG45S5 group showed promise compared to the other groups. In the histological analysis, both groups showed new bone formation in the defects after 2, 8, and 12 weeks. In the histomorphometric analysis, it was observed that the BG45S5 and HA groups presented a larger area of new bone formation at 12 weeks. There was a statistically significant difference between the groups at 2 weeks, with greater new formation for the BG45S5 group. Despite the promising results of the BG45S5 group, there was no statistically significant difference between the groups (p<0.05) at 8 and 12 weeks. In summary, the results evidenced the successful production of the synthetic biomaterial and the potential of the BG45S5 bioglass as a promising material for treating critical bone defect.(AU)

Research progress on dedifferentiated fat cells and their application in oral and maxillofacial bone tissue engineering / 口腔疾病防治

@#The identification of suitable seed cells represents a critical scientific problem to be solved in the field of oral and maxillofacial bone tissue regeneration. The application of adipose-derived stem cells (ASCs) in tissue and organ repair and regeneration has been studied extensively. In recent years, dedifferentiated fat (DFAT) cells have also shown broad application prospects in the field of bone tissue engineering. DFAT cells express stem cell-related markers and have the potential to differentiate into adipocytes, osteoblasts, chondrocytes, nerve cells, cardiomyocytes and endothelial cells. In addition, DFAT cells also have the advantages of minimally invasive acquisition, strong proliferation and high homogeneity. Currently, all studies involving the application of DFAT cells in scaffold-based and scaffold-free bone tissue engineering can confirm their effectiveness in promoting bone regeneration. However, cytological research still faces some challenges, including relatively low cell culture purity, unclear phenotypic characteristics and undefined dedifferentiation mechanisms. It is believed that with the continuous development and improvement of isolation, culture, identification and directional induction of osteogenic differentiation methods, DFAT cells are expected to become excellent seed cells in the field of oral and maxillofacial bone tissue engineering in the future.

Reconstruction of rat calvarial defects utilizing an ultraviolet-cured hydrogel loaded with bone marrow mesenchymal stem cells / 口腔疾病防治

Objective@#To investigate the osteogenic properties of a methacrylated gelatin (GelMA) / bone marrow mesenchymal stem cells (BMSCs) composite hydrogel applied to the skull defect area of rats and to provide an experimental basis for the development of bone regeneration biomaterials.@*Methods@#This study was approved by the Animal Ethics Committee of Nanjing University. A novel photocurable composite biohydrogel was developed by constructing photoinitiators [lthium phenyl (2,4,6-trimethylbenzoyl) phosphinate, LAP], GelMA, and BMSCs. The surface morphology and elemental composition of the gel were examined using scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDX). The compressive strength of the gel was evaluated using an electronic universal testing machine. After in vitro culture for 1, 2, and 5 days, the proliferation of the BMSCs in the hydrogels was assessed using a CCK-8 assay, and their survival and morphology were examined through confocal microscopy. A 5 mm critical bone deficiency model was generated in a rat skull. The group receiving composite hydrogel treatment was referred to as the GelMA/BMSCs group, whereas the untreated group served as the control group. At the 4th and 8th weeks, micro-CT scans were taken to measure the bone defect area and new bone index, while at the 8th week, skull samples from the defect area were subjected to H&E staining, van Gieson staining, and Goldner staining to evaluate the quality of bone regeneration and new bone formation.@*Results@#SEM observed that the solidified GelMA showed a 3D spongy gel network with uniform morphology, the porosity of GelMA was 73.41% and the pore size of GelMA was (28.75 ± 7.13) μm. EDX results showed that C and O were evenly distributed in the network macroporous structure of hydrogel. The hydrogel compression strength was 152 kPa. On the 5th day of GelMA/BMSCs culture, the cellular morphology transitioned from oval to spindle shaped under microscopic observation, accompanied by a significant increase in cell proliferation (159.4%, as determined by the CCK-8 assay). At 4 weeks after surgery, a 3D reconstructed micro-CT image revealed a minimal reduction in bone defect size within the control group and abundant new bone formation in the GelMA/BMSCs group. At 8 weeks after surgery, no significant changes were observed in the control group's bone defect area, with only limited evidence of new bone growth; however, substantial healing of skull defects was evident in the GelMA/BMSCs group. Quantitative analysis at both the 4- and 8-week examinations indicated significant improvements in the new bone volume (BV), new bone volume/total bone volume (BV/TV), bone surface (BS), and bone surface/total bone volume (BS/TV) in the GelMA/BMSCs group compared to those in the control group (P<0.05). Histological staining showed continuous and dense formation of bone tissue within the defects in the GelMA/BMSCs group and only sporadic formation of new bone, primarily consisting of fibrous connective tissue, at the defect edge in the control group.@*Conclusion@#Photocuring hydrogel-based stem cell therapy exhibits favorable biosafety profiles and has potential for clinical application by inducing new bone formation and promoting maturation within rat skull defects.

3D printed Mg-incorporated polycaprolactone scaffolds for repairing rat skull defects / 口腔疾病防治

Objective@#To evaluate the bone repair effect of 3D-printed magnesium (Mg)-loaded polycaprolactone (PCL) scaffolds in a rat skull defect model.@*Methods@#PCL scaffolds mixed with Mg microparticles were prepared by using 3D printing technology, as were pure PCL scaffolds. The surface morphologies of the two scaffolds were observed by scanning electron microscopy (SEM), and the surface elemental composition was analyzed via energy dispersive spectroscopy (EDS). The physical properties of the scaffolds were characterized through contact angle measurements and an electronic universal testing machine. This study has been reviewed and approved by the Ethics Committee. A critical size defect model was established in the skull of 15 Sprague-Dawley (SD) rats, which were divided into the PCL group, PCL-Mg group, and untreated group, with 5 rats in each group. Micro-CT scanning was performed to detect and analyze skull defect healing at 4 and 8 weeks after surgery, and samples from the skull defect area and major organs of the rats were obtained for histological staining at 8 weeks after surgery.@*Results@#The scaffolds had a pore size of (480 ± 25) μm, a fiber diameter of (300 ± 25) μm, and a porosity of approximately 66%. The PCL-Mg scaffolds contained 1.0 At% Mg, indicating successful incorporation of Mg microparticles. The contact angle of the PCL-Mg scaffolds was 68.97° ± 1.39°, indicating improved wettability compared to that of pure PCL scaffolds. Additionally, compared with that of pure PCL scaffolds, the compressive modulus of the PCL-Mg scaffolds was (57.37 ± 8.33) MPa, demonstrating enhanced strength. The PCL-Mg group exhibited the best bone formation behavior in the skull defect area compared with the control group and PCL group at 4 and 8 weeks after surgery. Moreover, quantitative parameters, such as bone volume (BV), bone volume/total volume (BV/TV), bone surface (BS), bone surface/total volume (BS/TV), trabecular thickness (Tb.Th), trabecular number (Tb.N) and bone mineral density (BMD), of skull defects were better than those in the other groups, indicating the best bone regeneration effect. H&E, Goldner, and VG staining revealed more mineralized new bone formation in the PCL-Mg group than in the other groups, and H&E staining of the major organs revealed good biosafety of the material.@*Conclusion@#PCL-Mg scaffolds can promote the repair of bone defects and have clinical potential as a new scaffold material for the repair of maxillofacial bone defects.

Bioceramic scaffolds with two-step internal/external modification of copper-containing polydopamine enhance antibacterial and alveolar bone regeneration capability / 浙江大学学报（英文版）（B辑：生物医学和生物技术）

Magnesium-doped calcium silicate (CS) bioceramic scaffolds have unique advantages in mandibular defect repair; however, they lack antibacterial properties to cope with the complex oral microbiome. Herein, for the first time, the CS scaffold was functionally modified with a novel copper-containing polydopamine (PDA(Cu2+‍)) rapid deposition method, to construct internally modified (*P), externally modified (@PDA), and dually modified (*P@PDA) scaffolds. The morphology, degradation behavior, and mechanical properties of the obtained scaffolds were evaluated in vitro. The results showed that the CS*P@PDA had a unique micro-/nano-structural surface and appreciable mechanical resistance. During the prolonged immersion stage, the release of copper ions from the CS*P@PDA scaffolds was rapid in the early stage and exhibited long-term sustained release. The in vitro evaluation revealed that the release behavior of copper ions ascribed an excellent antibacterial effect to the CS*P@PDA, while the scaffolds retained good cytocompatibility with improved osteogenesis and angiogenesis effects. Finally, the PDA(Cu2+)-modified scaffolds showed effective early bone regeneration in a critical-size rabbit mandibular defect model. Overall, it was indicated that considerable antibacterial property along with the enhancement of alveolar bone regeneration can be imparted to the scaffold by the two-step PDA(Cu2+) modification, and the convenience and wide applicability of this technique make it a promising strategy to avoid bacterial infections on implants.

A new hydroxyapatite-alginate-gelatin biocomposite favor bone regeneration in a critical-sized calvarial defect model

Abstract This study aimed to evaluate the osteogenic potential of hydroxyapatite (HA), Alginate (Alg), and Gelatine (Gel) composite in a critical-size defect model in rats. Twenty-four male rats were divided into three groups: a negative control with no treatment (Control group), a positive control treated with deproteinized bovine bone mineral (DBBM group), and the experimental group treated with the new HA-Alg-Gel composite (HA-Alg-Gel group). A critical size defect (8.5mm) was made in the rat's calvaria, and the bone formation was evaluated by in vivo microcomputed tomography analysis (µCT) after 1, 15, 45, and 90 days. After 90 days, the animals were euthanized and histological and histomorphometric analyses were performed. A higher proportion of mineralized tissue/biomaterial was observed in the DBBM group when compared to the HA-Alg-Gel and Control groups in the µCT analysis during all analysis periods. However, no differences were observed in the mineralized tissue/biomaterial proportion observed on day 1 (immediate postoperative) in comparison to later periods of analysis in all groups. In the histomorphometric analysis, the HA-Alg-Gel and Control groups showed higher bone formation than the DBBM group. Moreover, in histological analysis, five samples of the HA-Alg-Gal group exhibited formed bone spicules adjacent to the graft granules against only two of eight samples in the DBBM group. Both graft materials ensured the maintenance of defect bone thickness, while a tissue thickness reduction was observed in the control group. In conclusion, this study demonstrated the osteoconductive potential of HA-Alg-Gel bone graft by supporting new bone formation around its particles.

Resumo Este estudo teve como objetivo avaliar o potencial osteogênico de um compósito de hidroxiapatita (HA), alginato (Alg) e gelatina (Gel) em um modelo de defeito de tamanho crítico em ratos. Vinte e quatro ratos machos foram divididos em três grupos: um controle negativo sem tratamento (grupo controle), um controle positivo tratado com osso bovino desproteinizado (grupo DBBM) e o grupo experimental tratado com o novo compósito HA-Alg-Gel (grupo HA-Alg-Gel). Um defeito de tamanho crítico (8,5mm) foi feito na calvária dos ratos, e a formação óssea foi avaliada por análise de microtomografia computadorizada in vivo (µCT) após 1, 15, 45 e 90 dias. Após 90 dias, os animais foram eutanasiados e análises histológicas e histomorfométricas foram realizadas. Uma maior proporção de tecido mineralizado/biomaterial foi observada no grupo DBBM quando comparado aos grupos HA-Alg-Gel e controle na análise de µCT durante todos os períodos de análise. Entretanto, não foram observadas diferenças na proporção tecido mineralizado/biomaterial no dia 1 (pós-operatório imediato) em relação aos períodos posteriores de análise em todos os grupos. Na análise histomorfométrica, os grupos HA-Alg-Gel e controle apresentaram maior formação óssea do que o grupo DBBM. Além disso, na análise histológica, cinco amostras do grupo HA-Alg-Gal exibiram espículas ósseas formadas adjacentes aos grânulos do enxerto contra apenas duas das oito amostras do grupo DBBM. Ambos os materiais de enxerto garantiram a manutenção da espessura óssea do defeito, enquanto uma redução da espessura do tecido foi observada no grupo controle. Em conclusão, este estudo demonstrou o potencial osteocondutor do enxerto ósseo de HA-Alg-Gel, promovendo a formação de osso novo ao redor das suas partículas.

Preservação óssea alveolar pós exodontia: objetivos, opções técnicas, vantagens e desvantagens / Alveolar bone preservation after tooth extraction: objectives, technical options, advantages and disadvantages

A extração do elemento dentário promove uma série de eventos biológicos que resultam no colapso da estrutura alveolar, ocasionando a perda óssea volumétrica na região de extração. Preservar esse alvéolo dentário é imprescindível para uma boa reabilitação dentária do paciente. Objetivo: Realizar uma revisão de literatura abordando os objetivos, opções técnicas, vantagens e desvantagens da preservação óssea alveolar pós extração. Materiais e métodos: Foi feita uma revisão de literatura utilizando as bases de dados Biblioteca Virtual em Saúde (BVS), PubMed e Google acadêmico, usando os descritores "extração dentária", "perda do osso alveolar", "regeneração óssea". Foram incluídos 34 artigos. Resultados: A preservação alveolar pós extração começa desde a realização de uma técnica cirúrgica menos invasiva até a colocação de enxertos do tipo autógenos, alógenos, xenógenos, aloplásticos e biomateriais promotores de cicatrização e reparação tecidual. Conclusão: Existe na literatura atual uma vasta gama de textos científicos que abordam técnicas de preservação alveolar pós exodontia, com distintas respostas teciduais. Todavia, nenhum biomaterial listado nesta revisão contém todas as características que proporcionam regeneração completa do osso alveolar após exodontia(AU)

The extraction of the dental element promotes a series of biological events that results in the collapse of the alveolar structure, causing volumetric bone loss in the region of extraction. Preserving this dental alveolus is essential for a good dental rehabilitation of the patient. Objective: To conduct a literature review addressing the objectives, technical options, advantages and disadvantages of post-extraction alveolar bone preservation. Materials and methods: A literature review was carried out using the Virtual Health Library (VHL), PubMed and academic Google databases, using the descriptors "tooth extraction", "alveolar bone loss", "bone regeneration". 34 articles were included. Results: Post-extraction alveolar preservation starts from the performance of a less invasive surgical technique to the placement of autogenous, allogeneic, xenogeneic, alloplastic and biomaterials that promote healing and tissue repair. Conclusion: There´s is a wide range of scientific texts in the current literature that address post-extraction alveolar preservation techniques with different tissue responses. However, none of the biomaterials listed in this review contain all the characteristics that provide complete regeneration of alveolar bone after extraction(AU)

Neo-osteogenesis using an intentionally exposed polypropylene membrane after tooth extraction versus guided bone regeneration technique: a single-blind randomized controlled trial / Neo-osteogénesis utilizando una membrana de polipropileno expuesta intencionalmente después de la extracción del diente versus técnica de regeneración ósea guiada: ensayo clínico aleatorizado ciego / Neo-osteogênese utilizando uma membrana de polipropileno exposta intencionalmente após extração dentária versus técnica de regeneração óssea guiada: ensaio clínico randomizado e cego

Introduction: The intentionally exposed polypropylene (PP) membrane has been proposed for guided bone regeneration (GBR) of the alveo lar bone after extraction; however, there are biological limitations to this proposal. This study aimed to describe the effects of the PP membrane on neo-osteogenesis after tooth extraction, comparing to intentionally ex posed and primary soft tissue coverage techniques. Methodology: This clinical trial followed the TIDieR checklist and guide. Clinical and histo logical parameters of alveolar repair were compared between groups: 1 (control group), without regenerative procedure; 2, GBR; and 3, inten tionally exposed membrane. Results: Group 3 showed slight effect on the quality of new bone, compared to the control group. Although the GBR was underestimated by the early exposure of the membrane, alveo lar repair and newly formed bone were superior to the other groups. Poly propylene membrane intentionally exposed compromised the volume density of the immature and mineralized bone matrix, the osteoblast and osteocyte count, and stimulated the granulation tissue formation and local inflammatory infiltrate. Conclusions: Despite the exposure of the PP membrane in GBR, this technique improved the quality of new bone and alveolar repair compared to the surgical technique of intentional exposure and alveolus only sutured.

RESUMEN Introducción: La membrana de polipropileno (PP) intencionalmente expuesta ha sido propuesta para la regeneración ósea guiada (GBR) del hueso alveolar después de la extracción; sin embargo, existen limitaciones biológicas a esta propuesta. Este estudio tuvo como objetivo describir los efectos de la membrana de PP en la neo-osteogénesis después de la extracción del diente, en comparación con las técnicas de cobertura de tejido blando primarias y expuestas intencionalmente. Metodología: Este ensayo clínico siguió la lista de verificación y la guía TIDieR. Se compararon los parámetros clínicos e histológicos de la reparación alveolar entre los grupos: 1 (grupo control), sin procedimiento regenerativo; 2, GBR; y 3, membrana expuesta intencionalmente. Resultados: el grupo 3 mostró un ligero efecto sobre la calidad del hueso nuevo, en comparación con el grupo de control. Aunque la GBR fue subestimada por la exposición temprana de la membrana, la reparación alveolar y el hueso neoformado fueron superiores a los otros grupos. La membrana de polipropileno expuesta intencionalmente comprometió la densidad de volumen de la matriz ósea inmadura y mineralizada, el recuento de osteoblastos y osteocitos, y estimuló la formación de tejido de granulación y el infiltrado inflamatorio local. Conclusiones: A pesar de la exposición de la membrana de PP en GBR, esta técnica mejoró la calidad del hueso nuevo y la reparación alveolar en comparación con la técnica quirúrgica de exposición intencional y alvéolo solo suturado.

Introdução: A membrana de polipropileno (PP) intencionalmente exposta tem sido proposta para regeneração óssea guiada (ROG) do osso alveolar após exodontia; no entanto, existem limitações biológicas a esta proposta. Este estudo teve como objetivo descrever os efeitos da membrana de PP na neo-osteogênese após a extração dentária, comparando com as técnicas de exposição intencional e cobertura primária de tecidos moles. Metodologia: Este ensaio clínico seguiu a lista de verificação e o guia TIDieR. Parâmetros clínicos e histológicos do reparo alveolar foram comparados entre os grupos: 1 (grupo controle), sem procedimento regenerativo; 2, GBR; e 3, membrana intencionalmente exposta. Resultados: O Grupo 3 apresentou leve efeito na qualidade do novo osso, em comparação com o grupo controle. Embora o GBR tenha sido subestimado pela exposição precoce da membrana, o reparo alveolar e o osso neoformado foram superiores aos outros grupos. A exposição intencional da membrana de polipropileno comprometeu a densidade volumétrica da matriz óssea imatura e mineralizada, a contagem de osteoblastos e osteócitos e estimulou a formação de tecido de granulação e infiltrado inflamatório local. Conclusões: Apesar da exposição da membrana PP na ROG, esta técnica melhorou a qualidade do novo osso e da reparação alveolar em comparação com a técnica cirúrgica de exposição intencional e alvéolo apenas suturado.

Characterization of the Masquelet Induced Membrane Technique in a Murine Segmental Bone Defect Model / Caracterização da membrana induzida pela técnica de Masquelet em modelo murino de defeito ósseo segmentar

Abstract Objective To reproduce in an animal model the surgical technique of Masquelet used in the treatment of critical bone defects and to analyze the characteristics of the membrane formed around the bone cement. Methods A 10mm critical defect was created in the femoral shaft of 21 Sprague-Dawley rats. After resection of the central portion of the diaphysis, the defect was stabilized with a Kirschner wire introduced through the medullary canal and with the interposition of a bone cement spacer. After 2, 4, and 6 weeks of the surgical procedure, the animals were euthanized and evaluated on radiographs of the posterior limb regarding the size of the defect, alignment and stability of the osteosynthesis. The membranes formed around the spacer were subjected to histological analysis to assess thickness, connective tissue maturation and vascular density. Results Over time, the membranes initially made up of loose connective tissue were replaced by membranes represented by dense connective tissue, rich in thick collagen fibers. At six weeks, membrane thickness was greater (565 ± 208μm) than at four (186.9 ± 70.21μm, p = 0.0002) and two weeks (252.2 ± 55.1μm, p = 0.001). All membranes from the initial time showed foci of osteogenic differentiation that progressively reduced over time. Conclusion In addition to the structural and protective function of the membrane, its intrinsic biological characteristics can actively contribute to bone regeneration. The biological activity attributed by the presence of foci of osteogenesis confers to the membrane the potential of osteoinduction that favors the local conditions for the integration of the bone graft.

Resumo Objetivo Reproduzir em modelo animal a técnica cirúrgica de Masquelet utilizada no tratamento de defeitos ósseos críticos e analisar as características da membrana formada em torno do cimento ósseo. Métodos Um defeito crítico de 10mm foi realizado na diáfise femoral de 21 ratos Sprague-Dawley. Após a ressecção da porção central da diáfise o defeito foi estabilizado com fio de Kirschner introduzido pelo canal medular e com a interposição de espaçador de cimento ósseo. Após 2, 4, e 6 semanas do procedimento cirúrgico os animais foram eutanasiados e avaliados em radiografias do membro posterior quanto ao tamanho do defeito, o alinhamento e a estabilidade da osteossíntese. As membranas formadas em torno do espaçador foram submetidas a análise histológica para avaliação da espessura, da maturação do tecido conjuntivo e da densidade vascular. Resultados Ao longo do tempo as membranas inicialmente constituídas por tecido conjuntivo frouxo foram substituídas por membranas representadas por tecido conjuntivo denso, rico em fibras colágenas espessas. Com seis semanas a espessura das membranas foi maior (565 ± 208μm) do que com quatro (186,9 ± 70,21μm, p = 0,0002) e duas semanas (252,2 ± 55,1μm, p = 0,001). Todas as membranas do tempo inicial apresentaram focos de diferenciação osteogênica que reduziram progressivamente ao longo do tempo. Conclusão Além da função estrutural e protetora da membrana, suas características biológicas intrínsecas podem contribuir ativamente para a regeneração óssea. A atividade biológica atribuída pela presença de focos de osteogênese confere à membrana potencial de osteoindução que favorece as condições locais para a integração do enxerto ósseo.

Regeneração óssea guiada para aumento horizontal de rebordo utilizando fibrina rica em plaquetas associada a enxertos ósseos: revisão de literatura / Guided bone regenerationfor horizontal bone augmentation using platelet- rich fibrin associated with bone grafts: literature review

Objetivo: revisar a literatura sobre os diferentes tipos de derivados de plaquetas autólogas e o desempenho clínico do uso do sticky bone para aumento ósseo horizontal de rebordo. Materiais e métodos: Para realização dessa revisão foram realizadas buscas nas bases de dados PubMed, Google Scholar e Web of Science, utilizando os seguintes descritores: "platelet-rich fibrin" AND "sticky bone" OR "alveolar bone grafting" AND "sticky bone" OR "guided bone regeneration" AND "sticky bone" AND "alveolar ridge augmentation" OR "Alveolar ridge augmentation" AND "sticky bone". Foram incluídos artigos publicados em inglês, que abordavam conceitos relacionados aos agregados plaquetários e a regeneração óssea guiada para aumento ósseo horizontal de rebordo utilizando fibrina rica em plaquetas associada à enxertos ósseos (sticky bone). Resultados: Após avaliação dos estudos encontrados foram selecionados 11 artigos sobre o uso do sticky bone para aumento horizontal de rebordo. Para compor este trabalho foram selecionados também 14 estudos de revisão e artigos associados ao tema. Por ser de fácil aplicação e obtenção, muitos autores têm estudado as aplicações cirúrgicas do sticky bone e os resultados demonstram que o aumento horizontal do rebordo utilizando essa técnica pode ser realizado de forma previsível. Conclusão: apesar de haver estudos promissores sobre o uso do sticky bone, falta evidência na literatura sobre seu sucesso clínico. Assim, para compreender o potencial regenerativo desta técnica são necessários um maior número de estudos randomizados, com diferentes materiais de enxerto e protocolos padronizados de obtenção do sticky bone.(AU)

Objective: to review the literature on the different types of autologous platelet derivatives and the clinical performance of using sticky bone for horizontal bone ridge augmentation. Materials and methods: In order to conduct this review, it was conducted searches in the PubMed, Google Scholar, and Web of Science databases using the following descriptors: "platelet-rich fibrin" AND "sticky bone" OR "alveolar bone grafting" AND "sticky bone" OR "guided bone regeneration" AND "sticky bone" AND "alveolar ridge augmentation" OR "Alveolar ridge augmentation" AND "sticky bone". It included articles published in English that addressed concepts related to platelet aggregates and guided bone regeneration for horizontal bone augmentation using platelet-rich fibrin associated with bone grafts (sticky bone). Results: After evaluating the studies found, were selected 11 articles on the use of sticky bone for horizontal ridge augmentation. To compose this work, 14 review studies and articles associated with the topic were also selected. Due to its ease of application and availability, many authors have explored the surgical applications of sticky bone, and the results indicate that horizontal ridge augmentation using this technique can be predictably performed. Conclusion: while there are promising studies on the use of sticky bone, the literature lacks evidence regarding its clinical success. Therefore, to fully understand the regenerative potential of this technique, further randomized studies are needed, involving different graft materials and standardized protocols for obtaining sticky bone.(AU)

Split crest con colocación simultánea de implantes en sector anterior: reporte de un caso / Split crest with simultaneous placement of implants in the anterior sector: a case report

La pérdida ósea en el sector anterior, ya sea por un defecto horizontal, vertical o combinado, actualmente es un desafío, no sólo por la integración del implante, sino por la estética involucrada. Entre las técnicas de regeneración ósea que permiten solucionar estos defectos, cabe destacar la técnica de expansión de crestas. Se presenta el caso de una paciente de 58 años con reborde atrófico, que se sometió a la expansión de crestas con colocación simultánea de implantes en sector anterior, con xenoinjerto previo a técnica de expansión de crestas con piezoeléctrico, colocación simultánea de implantes Narrow Connection SLActive Straumann. Se logró ganancia ósea y estabilidad primaria de los implantes, sin complicaciones. En escenarios seleccionados, la técnica de expansión de crestas de manera predecible permite ganancia de hueso horizontal adecuada, el éxito de los implantes con tasa de supervivencia y mínimas complicaciones intra y postoperatorias (AU)

Bone loss in the anterior sector, both a horizontal, vertical or combined defect is a challenge today; not only for the integration of the implant but also the aesthetic involved. There are techniques of bone regeneration that help us to solve this type of defects, among them we should highlight the crest expansion technique. We present the case of a 58-year-old patient with atrophic flange, who underwent the expansion of crests with simultaneous placement of implants in the anterior sector, with xenograft prior to the piezoelectric crest expansion technique, Simultaneous placement of Narrow Connection SLActive Straumann implants, bone gain and primary stability of the implants were obtained, without complications. In selected scenarios, the crest expansion technique could be considered a predictable approach that demonstrates a high implant survival rate, adequate horizontal bone gain, and minimal intra- and postoperative complications (AU)

In vitro evaluation of membranes for regenerative procedures against oral bacteria

Abstract The current literature on guided bone regeneration (GBR) and guided tissue regeneration (GTR) membrane contamination reports that the physicochemical characteristics of these biomaterials might influence affinity to bacteria, which appears to be a major drawback for the clinical outcome of the regenerative procedures. Thus, this study aimed to evaluate, in vitro, a multispecies biofilm adherence and passage of bacteria through different types of commercially available membranes for GTR/GBR. Four types of membranes were tested (n=12): LC) Lumina Coat®; JS) Jason®; BG) Biogide®; and LP) Lumina PTFE®. Aluminum foil (AL) simulated an impermeable barrier and was used as the control. The membranes were adapted to specific apparatus and challenged with a mixed bacterial culture composed of A. actinomycetemcomitans b, S. mutans, S. mitis, and A. israelii. After 2 h or 7 days, bacterial adhesion and passage of bacteria were evaluated through CFU counting, which was analyzed by two-way ANOVA e post hoc Tukey, at a 5% significance level. Representative areas of two membranes of each group were analyzed through scanning electron microscopy (SEM) to assess the morphology and organization of the biofilm over the membrane fibers. LC and LP presented similar values of adhered bacterial cells (p > 0.05), significantly inferior when compared to the other groups, in both time points (p < 0.05). All the tested groups were permeable to bacterial cells, with no significant difference between the trial period of 2 h and 7 days (p > 0.05). SEM analyses demonstrated that adhered bacteria number increased throughout the time points (2 h < 7 days). Commercially available biological membranes demonstrated intense bacterial adherence and passage of bacteria, which increased throughout the trial period.

Resumo O objetivo deste estudo foi avaliar, in vitro, a aderência do biofilme multiespécie e a passagem de bactérias através dos diferentes tipos de membranas disponíveis comercialmente para RTG/ROG. Quatro tipos de membranas foram testados (n=12): LC) Lumina Coat®; JS) Jason®; BG) Biogide®; e LP) Lumina PTFE®. Papel alumínio (AL) simulou uma barreira impermeável e foi usado como controle negativo. As membranas foram adaptadas à um aparato específico e desafiadas com uma cultura bacteriana mista composta de A. actinomycetemcomitans b, S. mutans, S. mitis, e A. israelii. Após 2 h ou 7 dias, a aderência e passagem bacteriana foi avaliada através da contagem de UFCs. Duas membranas de cada grupo foram analisadas através da microscopia eletrônica de varredura (MEV). LC e LP apresentaram valores semelhantes de células bacterianas aderidas (p < 0.05), significativamente inferiores quando comparados aos outros grupos, em ambos os períodos experimentais (p < 0.05). Desde a análise inicial, todos os grupos testados foram permeáveis às células bacterianas, sem diferença significativa entre o período experimental de 2 h e 7 dias (p > 0.05). As análises em MEV demonstraram que o número de bactérias aderidas aumentou com o tempo (2 h < 7 days). Membranas biológicas comercialmente disponíveis demonstraram intensa aderência bacteriana e passagem de bactérias, que aumentou durante os períodos experimentais.

Use of enamel matrix- derived proteins combined with bone graft for the treatment of intrabony defects: overview of reviews (FRISBEE review) / Uso de proteínas derivadas de la matriz del esmalte combinado con injerto óseo para el tratamiento de defectos intraóseos: resumen estructurado de revisiones sistemáticas (revisión FRISBEE)

Introduction: The use of enamel matrix-derived proteins (EMD) has increased in recent years due to their tissue-inducing properties that support periodontal regeneration. This study is an overview of systematic reviews with FRISBEE methodology on the use of EMD alone or combined with autologous bone graft materials (BGM) in the treatment of intrabony defects. Materials and Methods: A systematic search in the Epistemonikos database was performed. RevMan 5.3 and GRADEpro were used for data analysis and presentation Results: Four systematic reviews and two clinical trials were identified. All studies analysed change in probing depth, clinical attachment level, gingival margin level and bone defect depth (all changes in favour of EMD+BGM groups: mean difference (MD): 0.37 mm more, MD: 0.7 mm more, MD: 0.3 mm less, MD: 0.75 more, respectively). Conclusions: Adding autologous bone graft to EMD to treat intrabony defects showed better results, but not a relevant clinical difference compared to the use of EMD alone.

Introducción: El uso de proteínas derivadas de la matriz del esmalte (EMD) ha aumentado en los últimos años debido a sus propiedades inductoras de tejidos que apoyan la regeneración periodontal. Este estudio es una revisión sistemática de revisiones sistemáticas utilizando metodología FRISBEE sobre el uso de EMD solo o combinado con materiales injerto óseo autólogo (BGM) en el tratamiento de defectos intraóseos. Materiales y Métodos: Se realizó una búsqueda sistemática en la base de datos Epistemonikos. Se utilizaron RevMan 5.3 y GRADEpro para el análisis y la presentación de los datos. Resultados: Se identificaron cuatro revisiones sistemáticas y dos ensayos clínicos. Todos los estudios analizaron el cambio en la profundidad de sondaje, el nivel de inserción clínica, el nivel del margen gingival y la profundidad del defecto óseo (todos los cambios a favor de los grupos EMD+BGM: MD: 0,37 mm más, media de diferencia (MD): 0,7 mm más, MD: 0,3 mm menos, MD: 0,75 más, respectivamente). Conclusión: La adición de injerto óseo autólogo a la EMD para tratar defectos intraóseos mostró mejores resultados, pero no una diferencia clínica relevante en comparación con el uso de la EMD sola.

Efficiency analysis of commercial polymeric membranes for bone regeneration in rat cranial defects

Purpose: To evaluate the in vivo efficiency of commercial polymeric membranes for guided bone regeneration. Methods: Rat calvarial critical size defects was treated with LuminaCoat (LC), Surgitime PTFE (SP), GenDerm (GD), Pratix (PR), Techgraft (TG) or control (C-) and histomorphometric analysis determined the percentage of new bone, connective tissue and biomaterial at 1 or 3 months. Statistical analysis used ANOVA with Tukey's post-test for means at same experimental time and the paired Student's t test between the two periods, considering p < 0.05. Results: New bone at 1 month was higher for SP, TG and C-, at 3 months there were no differences, and between 1 and 3 months PR had greater increase growthing. Connective tissue at 1 month was higher for C-, at 3 months for PR, TG and C-, and between 1 and 3 months C- had sharp decline. Biomaterial at 1 month was higher for LC, in 3 months for SP and TG, and between 1 and 3 months, LC, GD and TG had more decreasing mean. Conclusion: SP had greater osteopromotive capacity and limitation of connective ingrowth, but did not exhibit degradation. PR and TG had favorable osteopromotion, LC less connective tissue and GD more accelerated biodegradation.

Microcirugía endodóntica: regeneración ósea guiada en defecto óseo tunelizado: caso clínico / Endodontic microsurgery: guided bone regeneration in a through-and-through bone defect: a clinical case

Se presentó a la Cátedra de Endodoncia de la Facultad de Odontología de la Universidad de Buenos Aires un paciente masculino de 62 años de edad que al examen clínico presentaba una fístula vestibular en la zona de la pieza 1.2 y dolor a la percusión. Al examen radiográ-fico se identificó una lesión apical extensa abarcando las piezas dentarias 1.2 y 1.1 endodónticamente trata-das con alteración severa de la anatomía del espacio endodóntico, así como la presencia de postes metáli-cos que no respetaban el eje del canal radicular. Ante el análisis tomográfico se observó una perforación de la pieza 1.2 y una lesión periapical extensa afectando ambas corticales (vestibular y palatina). Se decidió un abordaje microquirúrgico con técnicas de regenera-ción ósea guiada (ROG) y se realizaron los controles clínico-tomográficos a los 6, 12 y 24 meses. Por otro lado, se evaluó con micromografía de rayos X la ana-tomía de los ápices radiculares resecados. La lesión extirpada fue analizada histológicamente (AU)

A 62-year-old male patient attended the Endodontics department of the Buenos Aires University. He was examined clinically and a vestibular fistula in 1.2 area and pain under percussion were found. Radiographic examination identified an extended periapical lesion compromising teeth 1.2 and 1.1 with endodontic treatment severely altering the root canal anatomy, as well as metallic cast posts that did not preserve root canal axis. Regarding the tomographic analysis, a vestibular root perforation was observed (1.2), and both, vestibular and palatal corticals, were affected. We decided to perform a surgical approach with guided bone regeneration techniques (GBR). Clinical-CBCT controls were done at 6, 12 and 24 months. Furthermore, the anatomy of the resected root apex-es was evaluated with X ray microtomography. The removed lesion was histologically analyzed (AU)

Systemic and local inflammatory response after implantation of biomaterial in critical bone injuries

ABSTRACT Purpose: To evaluate inflammatory response in critical bone injuries after implantation of the biomaterial composed of hydroxyapatite (HA)/poly (lactic-coglycolic acid) (PLGA)/BLEED. Methods: Forty-eight male Wistar rats (280 ± 20 grams) were divided into two groups: control group (CG), in which the animals do not receive any type of treatment; and biomaterial group (BG), in which the animals received the HA/PLGA/BLEED scaffold. Critical bone injury was induced in the medial region of the skull calotte with the aid of a trephine drill 8 mm in diameter. The biomaterial was implanted in the form of 1.5-mm thick scaffolds. Serum and calotte were collected at one, three and seven days. Results: Biomaterial had a significant effect on the morphological structure of the bone, accelerating osteoblast activation within three days, without causing exacerbated systemic inflammation. In addition, quantitative real-time polymerase chain reaction (qRT-PCR) analysis showed that BG induced upregulation of osteogenic genes such as runt-related transcription factor 2, and stimulated genes of inflammatory pathways such as tumor necrosis factor-α, on the first day without overexpressing genes related to bone matrix degradation, such as tissue inhibitor of metalloproteinases-1 and matrix metalloproteinase-9. Conclusions: The HA/PLGA/BLEED® association can be used as a bone graft to aid bone repair, as it is capable of modulating expression of important genes at this stage of the repair process.