Advances in abscisic acid biosynthesis / 生物工程学报

Abscisic acid, a plant hormone that inhibits growth, is a key factor in balancing plant endogenous hormones and regulating growth and metabolism. Abscisic acid can improve the drought resistance and salt tolerance of crops, reduce fruit browning, reduce the incidence rate of malaria and stimulate insulin secretion, so it has a broad application potential in agriculture and medicine. Compared with traditional plant extraction and chemical synthesis, abscisic acid synthesis by microorganisms is an economic and sustainable route. At present, a lot of progress has been made in the synthesis of abscisic acid by natural microorganisms such as Botrytis cinerea and Cercospora rosea, while the research on the synthesis of abscisic acid by engineered microorganisms is rarely reported. Saccharomyces cerevisiae, Yarrowia lipolytica and Escherichia coli are common hosts for heterologous synthesis of natural products due to their advantages of clear genetic background, easy operation and friendliness for industrial production. Therefore, the heterologous synthesis of abscisic acid by microorganisms is a more promising production method. The author reviews the research on the heterologous synthesis of abscisic acid by microorganisms from five aspects: selection of chassis cells, screening and expression enhancement of key enzymes, regulation of cofactors, enhancement of precursor supply and promotion of abscisic acid efflux. Finally, the future development direction of this field is prospected.

Physico-chemical and Microbiological Qualities of Abattoir Wastewater in Egbu, Imo State, Nigeria

Abbattoir waste water is of a complex composition. When discharged without being treated, poses a threat to human health and the environment. This is the practice common in Nigeria, and is worrisome.Objective: The aim of this study was to assess the physico-chemical and microbiological qualities of waste water from Egbu abattoir discharged into ‘Otamiri’ river in Owerri North local government area, Imo State, Nigeria.Methods: The microbial quality of abattoir wastewater was studied. The duration of the study was three months, from June to September, 2019. Sample collection was done in the morning (8-10am) and in the evening (4-6pm). A total of thirty samples (30) were collected from two sampling points, at the place of generation of the wastewater (Effluent source) and at the point of discharge into the river (POE). Standard methods were employed to assess the microbiological and physiochemical quality of the effluent. The microorganisms isolated from the samples included Escherichia coli, Salmonella, Staphylococcus, Aspergillus, Mucor, Listeria, Micrococcus and Candida species. The Total Heterotrophic Count (THC) of effluent samples, at source and POE were 8.51log10 cfu/ml and 6.15log10cfu/ml respectively, Total Coliform Count (TCC) for same samples were 6.77log10 cfu/ml and 4.56log10 cfu/ml respectively. The Total Fungal Count (TFC) of the effluent samples at source and at POE was 5.19log10 cfu/ml and 4.18log10 cfu/ml respectively. Results further revealed that the pH of the effluent at source was 6.58 while that at Point of Entry into the river was 7.30. The temperature of both samples was 25oC. The Total Dissolved Solid values of the effluent collected at source was higher, having a value of 1400mg/L against 1000mg/L at Point of Entry. Also the Biochemical Oxygen Demand (BOD) and Chemical Oxygen Demand (COD) values of the effluent at source were 5.10mg/L and 8.58mg/L respectively, while the BOD and COD of the water at the POE were 4.3mg/L and 7.9mg/L respectively.Conclusion: Abattoir wastes are becoming a major environmental health challenge and being discharged into the Otamiri River indiscriminately is of public health concern. The potential public health implications associated with discharging untreated abattoir wastewater into the environment and thus, the need for adequate treatment to ensure decontamination as well as providing wastewater treatment facility is imperative.

Aislamiento y caracterización de bacterias productoras de biopolimeros a partir de efluentes industriales / Isolated and characterization of biopolymer producing bacteria from industrial effluents

RESUMEN Se realizó una caracterización físico-química de los efluentes procedentes de industrias del sector educación, metalmecánico, lácteos y confitería de la ciudad de Manizales, Caldas; posteriormente se obtuvieron aislamientos, en medios diferenciales suplementados, de bacterias con potencial para la producción de biopolímeros a los cuales se les aplicó pruebas para la caracterización morfológica, bioquímica y molecular. Los parámetros físico químicos obtenidos de los efluentes industriales demuestran diferencias entre ellos, ya que cada industria genera diferentes residuos aportando una determinada contaminación al efluente, se obtuvieron 73 aislamientos productores de exopolisacáridos (EPS) y 101 productores de polihidroxialcanoatos (PHA), con características morfológicas y bioquímicas variables. El estudio muestra que los efluentes industriales son una gran fuente de bacterias de interés para la producción de diversos polímeros microbianos; principalmente aquellos que producen polímeros tipo biopoliésteres intracelulares como PHA, debido a su variabilidad físico-química y nutricional permitiendo que los microorganismos se adapten a diversas características medioambientales y de composición.

ABSTRACT A physical-chemical characterization of effluents from industries in the education, metal-mechanic, dairy and confectionery sectors of the city of Manizales, Caldas; Later isolates were obtained, in differential media supplemented, from bacteria with potential for the production of biopolymers to which they were applied tests for morphological, biochemical and molecular characterization. The physical chemical parameters obtained from the industrial effluents show a difference between them, since each industry generates different waste contributing a certain contamination to the effluent, 73 isolates producing exopolysaccharides (EPS) and 101 producers of polyhydroxyalkanoates (PHA) were obtained, with morphological characteristics and variable biochemistry. The study shows that industrial effluents are a great source of bacteria of interest for the production of various microbial polymers; mainly those that produce polymers like intracellular biopolyesters such as PHA, due to their physical-chemical and nutritional variability allowing the microorganisms to adapt to diverse environmental and compositional characteristics.

Efficiency of electrocoagulation in the treatment of laundromat greywater / Tratamento por eletrofloculação de efluentes oriundos de lavandeiras domésticas

ABSTRACT The high consumption of water and the generation of greywater in laundromats underscore the need to investigate advanced treatment techniques to reuse this effluent. Based on the estimated growth figures of the laundromat sector in Brazil, this study looked into the efficiency of electrocoagulation to treat laundromat greywater. Electrodes were connected to an EC reactor on a monopolar parallel connection mode, with electric current of 6 A and current density of 400 A.m2. The highest efficiency to treat laundromat greywater was observed at a distance of 15 mm between electrodes, voltage of 17.14 V, and operation time of 30 min, when the removal values of apparent color, true color, turbidity, biochemical oxygen demand, chemical oxygen demand, and surfactants were 92, 97, 88, 91, 98, and 96%, respectively. Electrode consumption was measured at 1.82 g.h, while energy consumption was 20.54 kWh.m3 and the total cost was US$ 4.10 per cubic meter of treated effluent. However, despite the high efficiency of the treatment, reuse of treated laundromat effluent requires polishing in order to meet the standards defined by Brazilian regulations.

RESUMO O elevado consumo de água potável e a consequente geração de efluentes associados ao segmento de lavanderias domésticas justificam o estudo de tratamentos avançados que proporcionem o reuso dessas águas. Considerando-se uma perspectiva de crescimento desse setor em nível nacional, esta pesquisa avaliou a eletrocoagulação como tecnologia de tratamento de tais efluentes. Foram executados testes de bancada utilizando eletrodos em alumínio, arranjados como monopolar paralelo. A corrente elétrica e a densidade de corrente foram fixadas em 6A e 400A.m², respectivamente. Entre as variáveis avaliadas estão a distância entre eletrodos, o tempo de operação, o tipo de roupa, a utilização de alvejante e o suporte para eletrólise. O melhor tratamento foi obtido sem a utilização do suporte para eletrólise, para uma distância entre eletrodos de 15 mm, tensão elétrica aplicada no sistema de 17,14 V e tempo de operação igual a 30 min. Nessas condições, as eficiências do tratamento obtidas foram de 92% para cor aparente, 97% para cor verdadeira, 88% para turbidez, 91% para demanda bioquímica de oxigênio, 98% para demanda química de oxigênio e 96% para surfactantes. O sistema resultou no consumo de eletrodo de 1,83 g.h e no consumo de energia elétrica igual a 20,57 kWh.m³. O custo final do tratamento foi calculado em US$ 4,10.m³ de efluente tratado. Embora tenham sido obtidas elevadas remoções nas concentrações dos poluentes, para o reuso do efluente ainda é necessário um tratamento adicional.

Evaluation and optimization of content determination method of Chrysanthemi Flos in Chinese Pharmacopoeia / 中国中药杂志

This study discovered that the resolution of 3,5-O-dicaffeoylquinic acid(isochlorogenic acid A) in the content determination method of Chrysanthemi Flos in Chinese Pharmacopoeia(ChP)(2020 edition) was poor, which affected accurate quantification. We tested the method in ChP with chromatographic columns of seven brands to clarify the problems in the existing method, optimized the chromatographic conditions by adjusting the mobile phase composition and elution ratio and replacing the chromatographic column packing, and carried out the reproducibility assay for the new method. The two methods were compared for the content determination results of Chrysanthemi Flos prepared from six different varieties. As evaluated by the resolution based on different chromatographic columns of seven brands, the existing method failed to separate isochlorogenic acid A and isochlorogenic acid D well. The peaks of the two components were not completely separated on three chromatographic columns, and isochlorogenic acid A and isochlorogenic acid D generated a co-effluent peak in the other four columns. Isochlorogenic acid A and isochlorogenic acid D could be completely separated under the optimized chromatographic conditions. The difference in the peak areas of isochlorogenic acid A+isochlorogenic acid D obtained by the optimized method and the method in ChP was not significant, with deviation less than 3.0%, which further proved that the result measured by the method in ChP was the co-effluent of isochlorogenic acid A and isochlorogenic acid D. The optimized method can ensure the accurate quantification of isochlorogenic acid A. The existing content determination method of Chrysanthemi Flos has the problem of poor resolution. It is recommended to revise the chromatographic conditions for the content determination method of Chrysanthemi Flos to improve the resolution of isochlorogenic acid A and ensure its accurate quantification.

Computational fluid dynamics analysis of influence of different pipe structures on gas mixing uniformity / 中国辐射卫生

Objective Tostudy the influence of pipe structures on the mixing uniformity of airborne effluents from nuclear power plant chimneys. Methods We used the computational fluid dynamics (CFD) method to simulate the velocity distribution and gas mixing in long straight pipes (I type) with square section and circular section, 90° single-bend pipes (L type) with square section and circular section, and 90° double-bend pipes (S type and U type) with square section and circular section. Results For the long straight pipe, due to the lack of flow disturbance caused by structural changes, the mixing effect was not good; when the pipe section was circular, it might take mixing distance 20 times the hydraulic diameter to achieve the uniformity index required by the relevant standard; for the square pipe, the distance might be longer. In the single bend pipe with square section, the velocity uniformity was improved more greatly after the bend, and the tracer gas met the mixing uniformity at a shorter distance (11 times the hydraulic diameter), as compared with the single bend pipe with circular section. For the S-type double-bend pipe, the tracer gas appeared uniformly mixed after a distance 6 times the hydraulic diameter in the square pipe, and 7 times the hydraulic diameter in the circular pipe. For the U-type double-bend pipe, the gas in the square pipe also achieved uniform mixing ata shorter distance downstream, and the airflow showed greater disturbance when passing through the bend. Conclusion The CFD method can make an accurate prediction for the change patterns of gas mixing uniformity in pipes with different structures, and can partially replace physical experiments to study the factors affecting the mixing uniformity of airborne effluents from the chimney of nuclear power plants.

Avaliação de ultrafiltração como alternativa à flotação por ar dissolvido no pós-tratamento do efluente de lodos ativados — estudo em escala piloto na estação de tratamento de esgoto Brasília norte / Evaluation of ultrafiltration as an alternative to dissolved air flotation for the post-treatment of activated sludge effluent — pilot study in the Brasília norte wastewater treatment plant

RESUMO A melhoria da qualidade dos efluentes das estações de tratamento de esgotos Brasília Norte e Sul tornou-se premente após o corpo receptor dos seus efluentes, o lago Paranoá, passar a ser utilizado como manancial de abastecimento. Este trabalho apresenta estudo comparativo entre o tratamento terciário por ultrafiltração precedido por coagulação em escala piloto e a flotação por ar dissolvido existente na estação de tratamento de esgotos Brasília Norte. A instalação piloto de ultrafiltração e a flotação por ar dissolvido foram alimentadas pela mesma matriz, o efluente da etapa de lodos ativados das estações de tratamento de esgotos Brasília Norte, após coagulação. Foram avaliadas sete condições operacionais da instalação piloto de ultrafiltração variando-se a vazão, o tempo de operação entre limpezas e a duração da limpeza física. O comportamento operacional e a qualidade do efluente produzido foram monitorados. O aumento do fluxo do permeado (de 40,2 para 50,6 e 61,0 L.m−2.h−1) e do tempo de operação entre as limpezas (de 25 para 38 e 50 min), bem como a redução da duração da retrolavagem (de 80 para 60 e 30 s) resultaram em evolução mais intensa da pressão transmembrana. A ultrafiltração foi mais eficiente do que a flotação por ar dissolvido na remoção de turbidez, sólidos suspensos totais, demanda química de oxigênio e fósforo total, com ganho médio de remoção de 9,4, 13,0, 8,5 e 12,8%, respectivamente. Destaca-se a remoção de coliformes na ultrafiltração, 3,4 log superior à da flotação por ar dissolvido. A utilização da ultrafiltração como alternativa à flotação por ar dissolvido apresenta a vantagem de produzir efluente de melhor qualidade, particularmente no aspecto microbiológico, com menor flutuação da qualidade, porém o tratamento e a destinação do lodo produzido pela ultrafiltração devem ser equacionados.

ABSTRACT Improvement in the effluent quality of the Brasília Norte and Brasília Sul wastewater treatment plants became necessary after their effluent receiving body, Paranoá Lake, started being used as source of drinking water for the population of Brasília (Federal District, Brazil). This is a comparative study between the tertiary treatment with ultrafiltration membrane (pilot scale) and the existing dissolved air flotation of Brasília Norte wastewater treatment plant. Both ultrafiltration pilot plant and dissolved air flotation were fed with the same matrix, the effluent of the activated sludge stage of Brasília Norte wastewater treatment plants, after coagulation. Seven operational conditions were evaluated at ultrafiltration pilot plant, with variations in flow rate, time of operation between cleaning processes, and the duration of backwashing. The operational behavior and the quality of the produced effluent were monitored. The increase in permeate flux (from 40.2 to 50.6 and 61.0 L.m−2.h−1) and in the time of operation between cleaning processes (from 25 to 38 and 50 min), as well as the reduction of backwashing duration (from 80 to 60 and 30s), resulted in a more intense evolution of transmembrane pressure. Ultrafiltration was more efficient than dissolved air flotation in the removal of turbidity, total suspended solids, chemical oxygen demand, and total phosphorous, with average gain in removal of 9.4, 13.0, 8.5, and 12.8%, respectively. It is worth mentioning the removal of coliforms by ultrafiltration, which was, on average, 3.4 log higher than that by dissolved air flotation. The use of ultrafiltration as an alternative to dissolved air flotation has the advantage of producing better quality effluent, particularly regarding microbiological aspects, providing lower quality fluctuation; however, treatment and destination of the ultrafiltration waste must be considered.

Produção, caracterização e aplicação de carvão ativado de caroço de pêssego no tratamento de efluente têxtil / Production, characterization, and application of activated charcoal from peach kernel in textile effluent treatment

RESUMO O objetivo deste estudo foi caracterizar a produção de um carvão de caroço de pêssego e também avaliar a adsorção de corantes têxteis pelo carvão ativado de caroço de pêssego. A ativação do carvão foi realizada utilizando cloreto de zinco como agente oxidante. O carvão ativado foi então utilizado na adsorção de corantes, para posterior aplicação no tratamento de um efluente têxtil. Primeiramente, realizou-se a produção de carvão ativado com as temperaturas de 500, 700 e 900°C e tempo de carbonização de 10 15 e 20 minutos e verificou-se a remoção dos corantes preto reativo 5 e azul de metileno. De acordo com a metodologia de superfície de resposta, a melhor temperatura de produção apresentou-se acima de 700°C com tempo de exposição de 10 minutos para os dois corantes. Desse carvão ativado, avaliaram-se os dados de densidade, teor de umidade e cinzas, pH e rendimento. Também foram realizados ensaios cinéticos e de equilíbrio. Os dados foram ajustados a três modelos cinéticos. As medidas para determinação da eficiência na remoção de cor do efluente têxtil foram realizadas pelo método espectrofotométrico e demonstraram média de remoção superior a 62% da cor presente no efluente bruto. Desse modo, o caroço de pêssego demonstrou elevado potencial para a produção de carvão ativado visando o tratamento de efluentes contendo corantes, podendo servir como alternativa de baixo custo.

ABSTRACT The aim of this study was to characterize the production of activated charcoal from the peach kernel and assess the adsorption of textile dyes by this activated charcoal. The activation of the charcoal was performed using zinc chloride as the oxidizing agent. The activated charcoal was then used in the adsorption of dyes for later application in the treatment of a textile effluent. Firstly, the production of activated carbon was carried out at temperatures of 500, 700, and 900°C and carbonization time of 10, 15, and 20 minutes and the removal of the Reactive Black 5 and Methylene Blue dyes was verified. According to the methodology of response surface, the best production temperature was above 700°C with 10 min exposure for both dyes. From this activated carbon, data on density, moisture and ash content, pH, and yield were evaluated. Kinetic and equilibrium tests were also performed. The data were fitted to three kinetic models. The measures to determine the efficiency in the color removal of the textile effluent were carried out by the spectrophotometric method and demonstrated an average removal greater than 62% of the color present in the raw effluent. In this way, the peach kernel demonstrated a high potential for the production of activated carbon aiming at the treatment of effluents containing dyes and can serve as a low cost alternative.

Establishment of zebrafish calculation model and calculation of relative dose coefficients / 中华放射医学与防护杂志

Objective:To assess impact of radiation from nuclear power on the surrounding environment, a dose assessment model was constructed and relevant dose coefficients were determined through refined animal models.Methods:Zebrafish is one of the most important aquatic model animals in the radiation hazard assessment of nuclear power liquid effluent. A geometric model of zebrafish containing internal bones and visceral organ was established for dose estimation. The internal and external dose coefficients (DC) of the zebrafish model were calculated by Monte Carlo method with seven nuclides as the source term, 3H, 40K, 58Co, 60Co, 110Ag, 134Cs, 137Cs, which are common in nuclear liquid effluents and environmental monitoring. Results:The level of nuclide gamma energy determines dose coefficients for external radiation. The dose coefficients of most nuclides in internal organs was higher than that in whole body, and the internal organ dose of 58Co was 165% higher than that in whole body. The internal radiation dose coefficients of the model established in this study was relatively high, and the internal radiation dose coefficients caused by 60Co was 2.6 times of existing ellipsoid model, which suggested that the different internal materials and the choice of different particle types would affect the energy deposition. Conclusions:Refining of model animals is important. Accurate assessment of the organs dose coefficients of model animals is helpful to assess the radiation effects on non-human species.

Avaliação da degradação de formol do efluente gerado no laboratório de anatomia por biorreatores anaeróbios e mapeamento dos pontos críticos de controle / Evaluation of formalin degradation of effluent generated in the anatomy laboratory by anaerobic bioreactors and mapping of critical control points

Diante das estratégias de ensino e aprendizagem adotadas na disciplina de Anatomia da Escola de Enfermagem de Ribeirão Preto da Universidade de São Paulo (EERP/USP), que requer a conservação de peças cadavéricas em solução de formol, no Laboratório Multidisciplinar são gerados significantes volumes de efluentes contendo este composto. Considerando as características tóxicas dessa substância, tanto aos seres vivos quanto ao meio ambiente, torna-se imprescindível o gerenciamento e tratamento deste resíduo gerado antes do descarte na rede coletora de esgotos. Embora diferentes métodos, sejam eles químicos ou biológicos, possam ser utilizados para promover o tratamento prévio ao descarte de soluções contendo formol, o uso de tratamentos biológicos, como o reator anaeróbio, possibilita o tratamento de grandes volumes de resíduos, gera menor exposição ocupacional e possui reduzido custo do processo. No ano de 2017 a EERP/USP implementou o Reator Anaeróbio Horizontal de Leito Fixo (RAHLF), dimensionado para atender grandes volumes de efluentes com solução de formol gerados na unidade. Neste contexto, este estudo inédito em escala industrial, além de monitorar a eficiência da remoção da solução de formol dos efluentes gerados do sistema de biorreatores também caracterizamos os pontos críticos de controle do processo de tratamento do RAHLF, durante o período de fevereiro a junho e de setembro a novembro do ano de 2020. Os resultados na entrada do RAHLF apresentaram uma média de 480,19 ± 116,06 mg.L-1, com amplitude amostral de 238,37 mg.L-1 a 774,60 mg.L-1, já na saída do RAHLF demonstraram média de 1,39 ± 0,56 mg.L-1, com amplitude amostral de 0,04 mg.L-1 a 2,32 mg.L-1, evidenciando assim a eficiência na degradação do formol pelos biorreatores em média de 99,70%. A partir dos dados foi evidenciado que além do desempenho satisfatório do RAHLF para o pré-tratamento de água residuária contendo formol, o reator também apresentou estabilidade de operação durante o desenvolvimento do estudo. Com o conhecimento de todas as etapas e dos pontos críticos do processo foi possível a organização do fluxograma do processo, desde o local gerador até a disposição do efluente para a rede coletora de esgoto municipal. A partir do fluxograma, foi possível desenvolver protocolo de operação, visando minimizar ao máximo potenciais ocorrências de falhas durante o processo. Este estudo gerou conhecimento que contribui para melhor compreensão da biotecnologia anaeróbia implantada para alcançar a degradação da solução de formol no efluente do Laboratório Multidisciplinar da EERP/USP. A implantação e funcionamento adequado do biodigestor refletem o compromisso socioambiental da universidade com a sociedade e com o meio ambiente, na busca de ações que promovam tanto a saúde pública quanto a sustentabilidade ambiental. Os resultados constituirão também uma base de dados para outros gestores de biodigestores implantados na universidade, sendo de grande importância para a continuidade de investigações relacionadas com o tratamento dos efluentes em laboratórios de ensino

For the development of teaching and learning strategies adopted in the discipline of Anatomy at the University of São Paulo at College of Nursing in Ribeirão Preto (CNRP/USP), which requires the preservation of cadaveric parts in a formaldehyde solution, the Multidisciplinary Laboratory generates significant volumes of effluents containing this compound. Considering the toxic characteristics of this substance, both to living beings and to the environment, it is essential to manage and treat this wastewater before its disposal in the sewage collection system. Although different methods, whether chemical or biological, can be used to promote treatment prior to disposal of solutions containing formaldehyde, the use of biological treatments, such as the anaerobic reactor, allows the treatment of large volumes of waste, generates less occupational exposure and has reduced process cost. In 2017, EERP/USP implemented the Anaerobic Horizontal Fixed Bed Reactor (AHFBR), dimensioned to supply large volumes of wastewater with a formaldehyde solution generated at the unit. In this context, this unprecedented study on an industrial scale, in addition to monitoring the efficiency of the removal of the formaldehyde solution from the effluents generated from the bioreactor system, we also characterized the critical control points of the AHFBR treatment process, during the period from February to June and from September to November of 2020. The results of the affluent of the AHFBR presented an average of 480.19 ± 116.06 mg.L-1, with a sample range of 238.37 mg.L-1 to 774.60 mg. L-1, already in the effluent of the AHFBR obtained average of 1.39 ± 0.56 mg.L-1, with a sample range of 0.04 mg.L-1 to 2.32 mg.L-1, thus evidencing the efficiency in formaldehyde degradation by bioreactors on average of 99.70%. From the data, it evidenced that in addition to the satisfactory performance of the AHFBR for the pre-treatment of wastewater containing formaldehyde, the reactor also showed operating stability during the development of the study. With the knowledge of all the steps and critical points of the process, it was possible to organize the process flowchart, from the generating site to the disposal of the effluent to the municipal sewage collection network. From the flowchart, it was possible to develop an operation protocol, aiming to minimize as many potential occurrences of failures during the process as possible. This study generated knowledge that contributes to a better understanding of the anaerobic biotechnology implemented to achieve the degradation of the formaldehyde solution in the effluent of the Multidisciplinary Laboratory at CNRP/USP. The implantation and proper functioning of the biodigester reflect the university's socio-environmental commitment to society and the environment, in the search for actions that promote both public health and environmental sustainability. The results will also constitute a database for other managers of biodigesters implemented at the university, being of great importance for the continuity of investigations related to the treatment of effluents in teaching laboratories

Aquaponic System with White Shrimp Litopenaeus vannamei Rearing and Production of the Plants Batis maritima, Sarcocornia neei and Sporobolus virginicus

Abstract Aquaponics is a system that integrates aquaculture with plant production in which two species are benefited, and there is water saving. In this study was carried out with an aquaponic system to verify the interaction between the growth of the halophytes Batis maritime, Sarcocornia neei, and Sporobolus virginicus associated with white shrimp Litopenaeus vannamei rearing. We also investigated if there were different responses of physicochemical variables of the water in the experimental shrimp culture ponds integrated into the growth of plants and control ponds, without plants, throughout a 56-day period. The treatment experiment and control presented a statistically significant difference in total dissolved solids, salinity, total suspended solids, ammonia, orthophosphate, and nitrite. In the experimental treatment, with the presence of plants and recirculating water, a reduction of total suspended solids, ammonia and orthophosphate was observed. The rate of shrimp production was not significantly different between treatments, and the performance was similar to that of other studies. The biomass gain of the halophyte B. maritima was 876.6 grams in 0.5 m² and of S. neei was 48.8 grams in 0.16 m². All plants of the species S. virginicus died during the experiment.

Evaluation of a Combined System Based on an Upflow Anaerobic Sludge Blanket Reactor (UASB) and Shallow Polishing Pond (SPP) for Textile Effluent Treatment

Abstract Color removal from textile effluents was evaluated using a laboratory-combined process based on an upflow anaerobic sludge blanket (UASB) reactor followed by a shallow polishing pond (SPP). The anaerobic reactor was fed with a real textile effluent, diluted 10-times in a 350 mg/L solution of pre-treated residual yeast extract from a brewery industry as nutrient source. The parameters color, COD, N-NH3 and toxicity were monitored throughout 45 days of operation. According to the results, decolorization and COD removal were highest in the anaerobic step, whereas the effluent was polished in the SPP unit. The overall efficiency of the complete UASB-SPP system for COD and color were 88 and 62%, respectively. Moreover, the N-NH3 generated by the residual yeast extract ammonification was below 5 mg/L for the final effluent. Finally, no toxicity was detected after the treatment steps, as shown by the Vibrio fischeri microscale assay.

Panorama da pesquisa sobre tratamento e reúso de efluentes da indústria de antibióticos / Overview of research on the treatment and reuse of effluents from the antibiotics industry

RESUMO Este trabalho realizou uma revisão integrativa de artigos científicos indexados entre 2007 e 2017 em diferentes bases de dados sobre o tratamento e o reúso de efluentes provenientes da indústria de antibióticos. Foram encontrados 31 artigos, sendo que somente 4 abordaram o reúso de efluente, e 1 utilizou um sistema de tratamento em escala real. A maior parte desses estudos foi realizado na Ásia, com destaque para a China. Observa-se que, no Brasil, que é um dos grandes produtores e consumidores de fármacos do mundo, esse tipo de pesquisa ainda é incipiente. Os processos mais encontrados foram os oxidativos avançados que mostraram maior eficiência na remoção de antibióticos, mas podem gerar subprodutos, o que pode representar um risco ainda maior dependendo da substância formada. Os processos biológicos devem ser primeiramente aclimatados aos antibióticos para não serem impactados, entretanto, a liberação desses micro-organismos resistentes no corpo receptor também apresenta um risco ambiental. Os sistemas integrados de membranas ao biológico também foram bem eficientes, mas atenta-se ao risco na destinação final dessas membranas que foram capazes de reter esses compostos. No geral, são necessários mais estudos sobre essa abordagem para reduzir os riscos no desenvolvimento de micro-organismos multirresistentes no meio ambiente.

ABSTRACT This work carried out an integrative review of scientific articles indexed between 2007 and 2017 in different databases on treatment and reuse of effluents from the antibiotic industry. Thirty-one articles were found and only four addressed effluent reuse, and one used a full-scale treatment system. Most of these studies were conducted in Asia, with emphasis on China. In Brazil, which is one of the largest producers and consumers of drugs in the world, this type of research is still incipient. The most commonly found processes were oxidative advanced processes that showed greater efficiency in removing antibiotics, but may generate by-products, which might pose an even greater risk depending on the substance formed. Biological processes must first be acclimated to antibiotics in order not to be impacted, however, the release of these resistant microorganisms into the water bodies also presents an environmental risk. Biological integrated membrane systems were also very efficient, but attention should be given to the risk in the final destination of these membranes that were able to retain those compounds. Overall, further studies on this approach are needed to reduce the risks of developing multi-resistant microorganisms in the environment.

Source Identification of Polycyclic Aromatic Hydrocarbons in Water at Point of Effluent Discharge into the New Calabar River, Port Harcourt, Rivers State, Nigeria

Water samples from effluents discharge points were analyzed for polycyclic aromatic hydrocarbons (PAHs) concentration using chromatographic techniques. The result obtained showed the presence of all the PAHs categories in the water samples. The total concentrations of PAHs in the different location showed that Minipiti station was the highest (44.99 mg/L), which was followed by the values obtained at the Police Post station (36.89 mg/L) and finally, the lowest value was obtained at the Iwofe Jetty station (11.923 mg/L). Diagnostic analysis of the concentrations of the different PAHS concentrations based on the ratio of low molecular weight PAHs to high molecular weight PAHs (LMW/HMW), anthracene / anthracene + phenanthrene {An/(An + Phe)} fluoranthene/ fluoranthene + pyrene {Fl /(Fl + Pyr} and benzo[a] anthracene/ benzo[a]anthracene + chrysene {BaA/ (BaA + Chr)} showed the predominance of pyrogenic PAHs over petrogenic PAHs. Thus indicating more of human input sources than natural. Ring size analysis indicated the predominance of the higher molecular weights (4-6) rings over the lower molecular weights (2-3) rings. The implications of the high level of PAHs within the sampled environment should give warning signals to the user of the water environment’.

Physico-Chemical Characterization Of Textile Effluent From A Dyeing Industry In Tiruppur Of Tamil Nadu

The physico-chemical parameters of various textile industrial effluents vary depending on the type of dyes and processingchemicals used. The major pollution indicating parameters like TS, TDS, TSS, DO, COD, BOD, pH, alkalinity, chlorides,sulphates and heavy metals were analyzed. The estimated parameters were compared with the stipulated standard values putforth by WHO, BIS and TNPCB. The effluent was highly turbid with high values for TDS, TSS, alkalinity, chlorides,sulphates and iron. The study also showed elevated levels of some heavy metals. Physico- chemical analysis indicate that theeffluent samples have higher values for most of the parameters and exceed the permissible limits. Based on the estimatedcharacteristics, it is revealed that the effluent is not suitable for direct discharge into water stream and need a suitabletechnology for the treatment before discharge.

Evaluación del quitosano como coagulante para el tratamiento de efluentes piscícolas / Evaluation of chitosan as a natural coagulant for fish effluents treatment

RESUMEN El uso de polímeros orgánicos para el tratamiento de aguas residuales a través de procesos de coagulación/floculación presenta ventajas sobre el uso de coagulantes inorgánicos, debido a la biodegradabilidad y la baja toxicidad en el agua de estos. El quitosano es un biopolímero que se ha utilizado como coagulante en el tratamiento de aguas residuales. En este estudio, se evaluó el quitosano como coagulante natural utilizado en la clarificación de efluentes piscícolas en tecnología biofloc (BFT) y en sistema de recirculación acuícola (RAS). Se implementó un diseño experimental completamente aleatorizado, de una vía, con efectos fijos. Los ensayos del agua se llevaron a cabo por el método de jar-test, donde se aplicaron dosis de quitosano de 3, 6, 9, 12 y 15 mg/L. Se analizó el efecto estadístico de la dosis de quitosano en la eliminación de la turbidez, sólidos suspendidos totales (SST) y sólidos suspendidos volátiles (SSV) del agua. Se encontró efecto del quitosano sobre la turbidez, dosis de 9 mg/L logró remociones del 88% y valores de 3.9 NTU (con error < 0.05). Sin aplicar quitosano al efluente, se lograron remociones de 78.2 y 76.7% para SST, SSV respectivamente. El quitosano permitió eliminar turbidez del efluente (BFT).

ABSTRACT Using organic polymers for wastewater treatment through coagulation/flocculation processes is more advantageous than current approach based on inorganic coagulants, due to the former's biodegradability and low toxicity in the water. Chitosan is a biopolymer that has been used as coagulant in wastewater treatment. In this study, chitosan was evaluated as a natural coagulant used in the clarification of fish effluents in biofloc technology (BFT) and aquaculture recirculation system (RAS). A one-way completely randomized experimental design with fixed effects was implemented. The water clarification tests were conducted using the jar test method with chitosan doses of 3, 6, 9, 12 and 15 mg/L. The chitosan dose effect was analyzed as natural coagulant on the removal of the water's turbidity, total suspended solids (SST) and volatile suspended solids (SSV). The effect of the chitosan load on the turbidity removal was found, as optimal dose of 9 mg/L for 88% with final turbidity value of 3.9 NTU (with significance < 0.05). In absence of chitosan, only values of 78.2 and 76.7% for SST and SSV were reached, respectively. Chitosan allowed the removal of turbidity from the water (BFT).

Tratamento de efluentes de lavanderia hospitalar por processo oxidativo avançado: UV/H2O2 / Wastewater treatment of hospital laundry by advanced oxidation process: UV/H 2 O 2

RESUMO O objetivo deste trabalho foi avaliar o tratamento de efluentes de lavanderia hospitalar por processo oxidativo avançado UV/H2O2. O planejamento fatorial 32 foi empregado de modo a avaliar a influência do pH e da dosagem de peróxido na eficiência do tratamento. Os experimentos de foto-oxidação foram realizados com efluentes coletados na lavanderia do Hospital Universitário Regional de Maringá (HUM). Resultados relativos à caracterização do efluente e às reduções de parâmetros físico-químicos: cor, turbidez, demanda biológica de oxigênio (DBO), surfactantes e a quantificação de coliformes totais e termotolerantes, também são apresentados neste trabalho. Foram testados três valores de pH - 5, 7 e 9 - e três dosagens de peróxido de hidrogênio nas razões de [DQO]:[H2O2] - 1:0,5, 1:2,5 e 1:5. Os melhores resultados foram alcançados com o tratamento realizado em pH 9 e razão [DQO]:[H2O2] de 1:2,5. As eficiências de remoção da demanda química de oxigênio (DQO) e de surfactantes foram, em média, de 60,3 e 98%, respectivamente, porém o tratamento não se mostrou eficiente na redução de cor e turbidez, demonstrando a necessidade de se acoplar tratamentos complementares para a redução de tais parâmetros.

ABSTRACT The objective of this work was to evaluate the treatment of hospital laundry effluents by advanced oxidation process UV/H2O2. Factorial design 32 was employed to investigate the influence of pH and peroxide dosage on treatment efficiency. The photo-oxidation experiments were performed with effluents collected in the laundry of the Regional University Hospital of Maringá (HUM). Physicochemical parameters of effluent color, turbidity, BOD, surfactants and quantification of total and thermotolerant coliforms are presented in this study. Three values ​​of pH - 5, 7 and 9 - and three dosages of hydrogen peroxide with [COD]:[H2O2] ratios of 1:0.5, 1:2.5 and 1:5 (w:w) were tested. The best results were achieved with the treatment performed at pH 9 and ratio [COD]:[H2O2] of 1:2.5. The average removal efficiencies of COD and surfactants were 60.3 and 98%, respectively. However, the treatment was not efficient in reducing color and turbidity, demonstrating the need to combine complementary treatments for the reduction of such parameters.

Sistema integrado com microalgas e wetland construído de fluxo vertical no tratamento de efluentes urbanos / Integrated system with microalgae and constructed wetland in vertical flow for urban wastewater treatment

RESUMO O sistema integrado com microalgas (MA) e wetland construído de fluxo vertical (wetland construído pós-microalgas - WCPMA) foi aplicado para a realização de ensaios de tratamento de efluentes no campus da Universidade de Santa Cruz do Sul, no Rio Grande do Sul (UNISC-RS). Águas negras e amarelas foram alimentadas para esse sistema em regime de batelada a partir de um tanque equalizador da estação de tratamento de efluentes da universidade, considerando tempo de detenção hidráulica (TDH) de três dias para cada unidade do sistema integrado. O comparativo de desempenho foi feito com unidades também envolvendo a sequência de tanque de armazenamento de efluentes (TAE) + sistema de controle (C), somente com suporte de areia e brita, em triplo estágio, bem como wetlands construídos de fluxo vertical, também em triplo estágio. O abastecimento utilizou fatores de carga em termos de demanda química de oxigênio (DQO) de 2,4±0,9 g m-1dia-1 para o TAE e de 26,7±11,2 g m-1dia-1 para as unidades de wetlands construídos, de MA+WCPMA e de C (sem o cultivo da Hymenachne grumosa). Em relação à unidade TAE+MA+WCPMA, as reduções dos parâmetros de cargas poluentes foram mais significativas em termos de demanda bioquímica de oxigênio (DBO5) (58%), fósforo total (63%) e, principalmente, nitrogênio amoniacal no sistema integrado, com redução de 100%. Em termos de toxicidade aguda com Daphnia magna, a detoxificação foi efetiva, com variações de valores de EC50 de 58 a 100%. O estudo obteve resultados expressivos que indicam que o sistema MA+WCPMA é uma alternativa promissora no tratamento de águas residuárias para unidades geradoras descentralizadas, possibilitando maior redução da ação eutrofizante.

ABSTRACT The application of integrated systems with microalgae (MA) and Vertical Flow Constructed Wetland Post Microalgae (CWPMA) was performed for campus wastewater treatment assays located in Santa Cruz do Sul (UNISC-RS). Black and yellow waters were fed to systems in batch regime from equalizer university wastewater treatment plant tank, considering hydraulic detention time (HDT) of three days for each unity of the integrated system (MA+CWPMA). The comparison of performances was also made with units involving storage tank wastewater (STW)+Control System (C), only supported with sand and gravel in triple stage, as well as CWs, also triple stage. The supply used load factors in terms of COD 2.4±0.9g m-1 day-1 (for STW) and 26.7±11.2 COD m-1day-1 for the units of CWs; MA+CWPMA and Control (without the cultivation of Hymenachne grumosa). Reductions of the parameters of pollution loads were more significant in terms of BOD5 (58%), total phosphorous (63%) and especially in terms of ammonia nitrogen in integrated STW+MA+CWPMA, with a reduction of 100%. In terms of acute toxicity with Daphnia magna, detoxification was effective, with EC50 values ranging from 58 to 100%. The study developed obtained significant results that indicate this is a promising alternative in the treatment of wastewater for decentralized generating units, allowing greater reduction in eutrophic action.

Effectiveness of application of lignolytic fungal strains, Cladosporium uredinicola GRDBF21 and Bipolaris maydis GRDBF23 in the treatment of tannery effluent

Aim: This study aims to investigate the ability of laccase producing fungal strains Cladosporium uredinicola GRDBF21 and Bipolaris maydis GRDBF23 isolated from decaying wood bark in decolouration and detoxification of tannery effluent. Methodology: Fungal strains from decaying wood bark samples were isolated by serial dilution technique followed by single spore isolation method. The selected fungal isolates were investigated for their laccase enzyme production. Their effect on physio-chemical properties of tannery effluent collected from final effluent drainage of a leather-tanning factory in Chrompet, Chennai, Tamil Nadu, India was analysed. Toxicity of treated and untreated tannery effluent was analysed by seed germination test. Results: The lignolytic and constitutive producers of laccase enzyme, C. uredinicola GRDBF21 and B. maydis GRDBF23 exhibited a tolerance index of 1.2 and 1.5, respectively, at 60% effluent concentration. The isolates were able to increase pH and reduce colour, turbidity, total suspended solids and electrical conductivity of the effluent. Besides observing a decrease in the BOD and COD levels, there was also a reduction in the sodium and hexavalent chromium content. C. uredinicola GRDBF21 and B. maydis GRDBF23 treated effluent showed a seed germination percentage of 66.6% and 76.6%, respectively. The untreated effluent completely inhibited the seed germination. Interpretation: The study confirms that the fungal species C. uredinicola GRDBF21 and B. maydis GRDBF23 could be effectively used in decolouration and detoxification of tannery effluent.

Bioremediation of Industrial Effluent using Cyanobacterial Species: Phormidium mucicola and Anabaena aequalis

Different Industries discharge effluent in different water bodies, which is the only reason of pollution. The main objective of the present study was to investigate the biodegradation and biosorption capacity of some potential cyanobacterial species; Phormidium mucicola and Anabaena aequalis in Textile and Pharmaceutical industries, Mandideep, Bhopal Madhya Pradesh, India. Industrial effluents are contaminated with heavy metal. The effluents were subjected to biological treatment using axenic cyanobacterial strains as batch system for 7 days. Removal efficiencies of the different contaminants were evaluated and compared. Results confirmed the high efficiencies of the investigated species for the removal of the target contaminants which were species and contaminant-dependent. BOD and COD recorded 91.18 and 82.54% as maximum removal efficiencies achieved by Anabaena aequalis. The highest removal efficiencies of the total suspended solids recorded 53.23% achieved by Phormidium mucicola, while 41.61% was recorded as the highest TDS. Concerning the contaminant metals, Phormidium mucicola showed the highest biosorption capacity where 86.12 and 94.63% removal efficiencies were achieved for Zn and Cu, respectively. In conclusion, results of the study confirmed the advantageous potential of using the tested cyanobacterial species for the bioremediation of industrial effluent and clearly showed the quality improvement of the discharged effluent which in turn will eliminate or at least minimize the expected deterioration of the receiving environment.