ABSTRACT
Keratoplasty, which is cornea transplant surgery, is one of the treatment methods for patients with turbidity or keratitis. Recently, keratoplasty using a surgical robot was studied to increase precision. In this study, the effect of surgical factors on the deformation and curvature of the cornea were analyzed in order to improve the accuracy of keratoplasty and derive the optimal surgical factors using finite element method (FEM). Suturing tension and depth were selected as surgical factors. An FEM model, a constitutive equation, and boundary conditions were determined using experiments and reference data. Suturing tension significantly impacted deformation and curvature change, and suturing depth affected the position of the thread-cornea contact point. Both factors have a significant impact on a focal point in the retina and the patient's visual acuity after keratoplasty.
Subject(s)
Humans , Cornea , Corneal Transplantation , Finite Element Analysis , Keratitis , Methods , Retina , Visual AcuityABSTRACT
Objetivou-se, a partir do Método dos Elementos Finitos, avaliar a biomecânica da união dente-implante e implante-implante, além de estabelecer uma análise qualitativa com achados fotoelásticos prévios. Foram planejados quatro modelos tridimensionais: dois Modelos Teste (dentes unidos a implantes) e dois Modelos Controle (a mesma condição, porém implanto suportada). Os implantes (ANKYLOS® - Dentsply) apresentaram conexão cônica, roscas quadradas e pilares Switching. Suas dimensões, ângulos externos e pilares protéticos foram obtidos a partir de um projetor de perfil. Já, dentes e próteses, a partir da visão direta, tiveram suas formas externas construídas em plataforma CAD (SOLIDSWORKS). O suporte alveolar foi configurado como um retângulo (68/30/15 mm). Todos os pilares foram posicionados no suporte alveolar, conforme os modelos físicos pré-existentes, gerando modelos sólidos. O ligamento periodontal consistiu de uma camada de 0,25 mm de espessura em poliéter (Impregum Soft, 3M Espe). Os modelos de dentes foram produzidos em dentina, pilares e implantes em titânio puro, próteses em liga Níquel-Cromo (Ni-Cr), e o suporte alveolar em resina fotoelástica (Araldite® - Produtos Químicos Ciba S/A do Brasil). As propriedades da resina foram obtidas por meio de ensaio de tração. Carga pontual, vertical e estática, de 150 N, foi aplicada. Os resultados destes ensaios evidenciaram menor concentração de tensão no aspecto cervical de implantes do grupo teste. Ao se confrontar tais achados com os fotoelásticos anteriormente obtidos, foi possível estabelecer uma relação direta entre as áreas mais solicitadas para os modelos de prótese fixa (PF) de três elementos. Concluiu-se que, para as condições estudadas ¿ conexão cônica, roscas quadradas e restauração com Plataforma Switching ¿, unir dentes a implantes parece ser uma terapia clínica viável, sugerindo, inclusive, ser mais favorável que a união de implantes entre si. Além disso, a partir da afinidade positiva entre os achados das duas técnicas, pôde-se considerar validados os modelos matemáticos de prótese fixa de três elementos
The goal of this study was to evaluate, from the Finite Element Method, the biomechanics of implant-tooth union and implant-implant and to establish a qualitative analysis with previous photoelastic findings. Four three-dimensional models were planned: two Test Models (teeth attached to implants) and two Control Models (the same condition, however implant supported). The implants (ANKYLOS® - Dentsply) showed conical connection, square threads and Switching pillars. Their dimensions, external angles and abutments were obtained from a profile projector. Already, teeth and dentures, from direct view, had their external forms built in CAD platform (SOLIDSWORKS). Alveolar support wasconfigured as a rectangle (68/30/15 mm). All the pillars were placed in the alveolar support, as the pre-existing physical models, generating solid models. The periodontal ligament consists of a layer of 0.25 mm thick in polyether (Impregum Soft, 3M Espe). The models of teeth trumped up of dentin, abutments and implants of pure titanium, prosthetics of Nickel-Chrome (Ni-Cr) alloy and alveolar support in photoelastic resin (Araldite® - Chemicals Ciba S/A of Brazil). The resin properties were obtained by traction tests. Punctual and vertical static load of 150 N was applied. The results of these tests showed lower concentration of tension in the cervical aspect of the test group implants. When comparing these findings with the photoelastic previously found, it was possible to establish a direct relation between the areas most requested for fixed prosthesis (FP) models of three elements. It was concluded that, for the studied conditions tapered connection, square threads and Platform Switching restoration , joining teeth implants seems to be a viable clinical therapy, suggesting, inclusive, to be more favorable than to join implants each other. Moreover, from the positive affinity between the findings of the two techniques, it was possible to consider validated the mathematical models of fixed prosthesis of three elements
Subject(s)
Dental Implant-Abutment Design/trends , Dental Implantation, Endosseous/adverse effects , Dental Implants/trends , Models, Dental/statistics & numerical data , Dental Prosthesis, Implant-Supported/trends , Finite Element Analysis/statistics & numerical data , Imaging, Three-Dimensional/statistics & numerical data , Periodontal Ligament , Biomechanical Phenomena , Tensile StrengthABSTRACT
El anclaje ha sido un aspecto crucial para la mayoría de los tratamientos de Ortodoncia. En las últimas dos décadas, el anclaje con miniimplantes ha aumentado el espectro de posibilidades para muchos tipos de tratamientos por presentar numerosas ventajas y pocas desventajas. Este artículo pretende hacer una revisión de literatura sobre los mecanismos de la biología ósea básica, como los aspectos mecánicos los activan y modulan; como se genera la estabilidad primaria y secundaria, como incide de manera crítica el porcentaje de éxito con el uso de los miniimplantes y como se ha estudiado esta interrelación por medio de modelos con elementos finitos.
Anchorage is crucial in most orthodontic treatments. During the last two decades, anchorage with mini-screw implants has increased the number of possibilities for many different types of orthodontic treatments. The aim of this paper is to present a literature review regarding how bone biology processes are elicited and modulated; how primary and secondary stability influence the success rate when mini-screw implants are used; and how this relation has been studied by means of the finite element method.
ABSTRACT
Objective To study dynamic characteristics of human lumbar spine using three-dimensional finite element method. Methods Finite element model of lumbar spine (L1~5) was developed and validated based on CT images, and the modal analysis was also conducted. Results A total of top 30-order modal parameters were extracted to obtain dynamic characteristics of the lumbar spine under free boundary conditions. Resonance frequencies of the model were concentrately distributed, but the amplitude of each order varied greatly. Amplitude near L5 segment was much larger, indicating L5 was easily to be injured. This lumbar modal analysis could provide a basis for its further dynamic analysis. Parameters such as natural frequency, modal shape and vibration amplitude of the lumbar spine would be helpful for both lumbar dynamic analysis and optimal design of man-machine interface mechanical equipment.
ABSTRACT
In order to study mechanical stress on root from orthodontic tooth movement by sliding mechanics, a 3-dimensional finite element model incorporating all layers of a human mandibular dental arch with orthodontic appliance has been developed to simulate mechanical stress on root from the orthodontic tooth movement. Simulated orthodontic force of 2 N at 0, 30 and 45 degree from the horizontal axis was applied to the crown of the teeth. The finite element analysis showed when or- thodontic forces were applied to the tooth, the stress was mainly concentrated at the neck of the tooth decreasing uniformly to the apex and crown. The highest stress on the root was 0.621 N/ram2 for cer- vical margin of the canine, and 0.114 N/mm2 for apical region of the canine. The top of canine crown showed the largest amount of displacement (2.417 μm), while the lowest amount of displacement was located at the apical region of canine (0.043 μm). In conclusion, this model might enable one to simulate orthodontic tooth movements clinically. Sliding force at 2 N is ideal to ensure the bodily or- thodontic tooth movement. The highest stress concentration in the roots was always localized at the cervical margin when orthodontic force of 2 N at 0, 30 and 45 degree from the horizontal axis, so there may be the same risk of root resorption when orthodontic force of 2 N at 0, 30 and 45 degree was used in clinic cases.
ABSTRACT
In this study, three treatment options to replace two posterior missing teeth were investigated using three dimensional finite element analysis: two wide(.5.0mm) implants(the experimental model I), two standard(.3.75mm) implants(the experimental model II), and three standard(.3.75mm) implants(the experimental model III). Two kinds of load case were applied ; 1) perpendicular on occlusal surface(axial load), parallel on occlusal surface(lateral load). 2) perpendicular on occlusal surface(3mm lateral to central point). The results obtained from this study were as follows; value of on-mises stress (equivalent stress) was smallest in the two wide implant among the three experimental models. It was reported that the diameter is the efficient factor than osseointegrated surface area.
Subject(s)
Finite Element Analysis , Models, Theoretical , ToothABSTRACT
?Objective: To study the stress distribution of one segment type mono dowel implant with various length and diameter in alveolar bone. Methods: The thickness of cortical bone is 1～2 mm, implant was in close contact with alveolar bone directly. Implants with root length of 10,12,13 and 14 mm, cast diameter of 3.6, 3.7, 3.8, 3.9 and 4.0 mm, corona tall 4 and 9 mm were put into a bone model with alveolar bone. 200 N force was loaded in vertical, 45? oblique and 45? oblique of non center. CT and 3D FEM were used to study the stress distribution and selected the morphology of alveolar bone from first molar of lower jaw and an incisor of maxillary. Results: There was an area of stress in the boundary of the cortical and cancellous bony tissue,horizontal hole. The main region of stress was at the cancellous. Thickness and shape of alveolar bone could affect the distribution of stress. The maximal Von Mises Stress was always in the boundary of cortical and bone that contacted with implant. Higher elastic modulus of bone around the implant had higher stress in cortical stress . Conclusion: The stress of cortical and cancellous bone can be depressed to rise elastic modulus of implant.
ABSTRACT
Objective:To investigate the stress distribution of the edentulous maxilla with unilateral maxillary defect after implant rehabilitation under occlusal loads.Methods:Three dimensional finite element model of the edentulous maxilla with unilateral maxillary defect was build.The stress distribution of the edentulous maxilla under occlusal loads with computer simulated implant rehabilitation was investigated.Results:Regardless of load manner,the stress of the bone around 1 were high when just healthy side implanted,but the stress reduced after implantantion in health side combined with the implantation in zygoma in defect side.Conclusion:Implantation in health side combined with that in zygoma in defect side can reduce the stress of the bone around the implant.
ABSTRACT
Objective:To investigate the influences of material properties and damping effect on the dynamic response analysis of human periodontal ligament. Methods: A 3-D finite element model of human teeth and periodontal tissue was built from graphic information obtained by CT scanning. Dynamic analysis was performed to investigate the influence of different damping effects on the stresses of periodontal ligament by the finite element method. Results: (a) No significant difference of stress between small and large deformation assumption was found, the variation was no more than 1.4%.(b) Dynamic response was obtained under ? varies from 0 to 1.2. After one mastication period, the residual stress at interior surface was larger than that at exterior surface, with a maximum value of ? r = 0.34 MPa at labial cervical area. Conclusion: Appropriate assumptions on material properties may reduce the cost of analysis. After one mastication period, some levels of residual stresses are in periodontal ligament and influenced by material damp.
ABSTRACT
Objective:To study the stress distribution of periodontal supporting tissues of mandibular complete overdenture based on post-core abutment. Methods:3-D finite element method (FEM) was employed to investigate the stress distribution of periodontal supporting tissues of mandibular complete overdenture based on post-core abutment, the stress values of periodontal membrane and lamina dura were calculated and compared with those of natural abutment. Results:The values of stress in distal area of abutment were larger than that in medial area. Post-core reduced periodontal membrane stress value in distal area of abutment cervix dentin, as well as that in apical zone, increased the stress value in distal periodontal membrane of the middle part of root, raised the stress value of distal lamina dura of abutment cervix dentin, while reduced the stress value below the cervix dentin. Conclusion:Abutment tends to incline distally. Post-core can influence stress distribution of periodontal membrane and lamina dura and reduce the stress value on root-end.