ABSTRACT
Abstract The present study aimed to investigate the beneficial of prepared black rice anthocyanins nano-composite (An-AgNps) against hepatotoxicity induced by methotrexate (MTX) in rats. Anthocyanins nano-composite was prepared by silver as the metallic ion reduction and were characterized by IR and SEM. The rats in our experiment were divided into five groups. Serum lipid profile, serum transaminases (ALT and AST), ALP, LDH, TBA, GSH and SOD were examined. The results show that SEM of An-AgNps has average particle size from 70 to 130nm. In the group treated with MTX; TC, TG, LDL-c, ALT, AST, ALP, LDH and TBA levels were significantly (P0.05) increased than NC, while, HDL-c, SOD and GSH levels were significantly (P0.05) decreased. On the other hand, An-AgNps + MTX treated groups were reversed the levels of all biomarkers similar to NC. In conclusion, the results show that An-AgNps has a protective effect on MTX-induced hepatotoxicity and oxidative stress.
Resumo O presente estudo teve como objetivo investigar o benefício de nanocompósito de antocianinas de arroz preto preparado (An-AgNps) contra a hepatotoxicidade induzida por metotrexato (MTX) em ratos. O nanocompósito de antocianinas foi preparado a partir da prata por meio da redução do íon metálico e caracterizado por IR e SEM. Os ratos em nosso experimento foram divididos em cinco grupos, e foram examinados o perfil lipídico sérico, as transaminases séricas (ALT e AST), ALP, LDH, TBA, GSH e SOD. Os resultados mostram que SEM de An-AgNps tem tamanho médio de partícula de 70 a 130 nm. No grupo tratado com MTX, os níveis de TC, TG, LDL-c, ALT, AST, ALP, LDH e TBA aumentaram significativamente (P 0,05) do que NC, enquanto os níveis de HDL-c, SOD e GSH diminuíram significativamente (P 0,05). Por outro lado, nos grupos tratados com An-AgNps + MTX, foram revertidos os níveis de todos os biomarcadores semelhantes ao NC. Em conclusão, os resultados mostram que o An-AgNps tem um efeito protetor contra a hepatotoxicidade induzida pelo MTX e o estresse oxidativo.
ABSTRACT
Fixed partial dentures (FPDs) with high-strength all-ceramicsystems are necessary for replacing missing teeth. Widerange of materials and methods are available to fabricate arestoration outside the mouth and subsequently integratewith a tooth. The traditional methods of ceramic fabricationhave been described to be time-consuming, techniquesensitive, and rather unpredictable due to the many variablespresent which affect the outcome. All-ceramic restorations,has become a segment of dentistry which has experiencedtremendous improvements in the recent years. The increasinguse of polycrystalline alumina and zirconia as frameworkmaterials and the increasing popularity and variety ofcomputer-aided design and computer-aided manufacturing(CAD-CAM) systems seem to be mutually accelerating trendsover the last three decades. This article presents a review ofthe development of all-ceramic restorations, including theevolution and development of materials, technologies andhow to improve the strength of all-ceramic restorations, withrespect to survival, applications, strength, color, and aesthetics.The literature demonstrates that multiple all-ceramic materialsand systems that are currently available for clinical use andconcludes there is not a single universal material or, systemavailable to suit for all clinical situations.
ABSTRACT
Natural antioxidants in edible coatings can modify the structure and improves the functionality and applicabilityof the film in food industries. This study was done to determine the antimicrobial effect of nano-compositebased on bean pod shell gum (4% w/v), TiO2 nano-particles (NPs) (1%–2% w/v) and Mentha pulegiumessential oil (EO) (2%–4% v/v) on five food-borne pathogens in two categories, including Gram positives andthree Gram-negatives bacteria. The antimicrobial activity was tested using disk diffusion test. According to theresults, Gram-positive bacteria were more susceptible than Gram-negative bacteria. Increasing M. pulegiumEO and TiO2 NPs content increased the antimicrobial activity of the edible film based on bean pod shell gum,so that the treatment containing 4% v/v M. pulegium EO and 2% w/v TiO2 NPs led to the highest inhibitionzone (11.8–15.2 mm) compared to treatment containing 2% v/v M. pulegium EO and 1% w/v TiO2 NPs withinhibition zone range of 9.8–11.5 mm. In general, TiO2 NPs and M. pulegium EO improved the functionalproperties, including antimicrobial activity of the edible film based on bean pod shell gum which increases thepotential of films to be used for fresh products.
ABSTRACT
The (PMMA-Ag) nano-composites films were prepared via photo polymerization method with different percentages (0.0%, 0.05%, 0.1%, 0.15% and 0.2%) of Ag. The structural, bacterial and mechanical properties of nano-composites were studied, FTIR spectra show a shift in peak position as well as a change in intensity. Scanning electron microscopy shows the surface morphology of the (PMM-Ag) nano-composites films. Three point bending testing, compressive strength, and impact strength were investigated and the results illustrate each mechanical property which improves the polymer characteristics. Then we reached that nano-composite materials are considered as the most important materials which are used as dental molds.
ABSTRACT
ABSTRACT Protease is an enzyme which has a wide range of applications in various fields. Extracellular protease was produced from Pseudomonas aeruginosa and Enterococcus hirae which were isolated from the effluents of diary industries. Protease immobilized with super paramagnetic nanoparticles was characterized by DLS, XRD and TEM methods in relation to their size and structure. The protease enzyme was bound to magnetic nanoparticles via surface transformation technique including Silica coated magnetic Nano composite, amine and cysteine functioned Nano composite formation. Successful binding of protease onto the particles was confirmed by TEM imaging. The maximal enzyme activity of immobilized protease was determined using universal protease assay and was found to be 105µg mL -1 & 290µg mL -1 for Pseudomonas sp. and Enterococcus sp. respectively. The immobilization capacity of protease onto nanoparticles was 6000µM/g. The stability of the immobilized enzyme increased in comparison with the free enzyme. Overall, this study showed that the stability and activity of the protease was enhanced by immobilization to the magnetic nanoparticles. This suggested that immobilized enzyme on the magnetic beads of nanoparticles could be used in an interesting range of applications, both in broader temperature and pH ranges, also permitting magnetic recovery of the enzyme for reuse or purification of the product.
ABSTRACT
OBJECTIVES: The purpose of this study was to compare the marginal and internal fit of nano-composite CAD-CAM restorations. MATERIALS AND METHODS: A full veneer crown and an mesio-occluso-distal (MOD) inlay cavity, which were prepared on extracted human molars, were used as templates of epoxy resin replicas. The prepared teeth were scanned and CAD-CAM restorations were milled using Lava Ultimate (LU) and experimental nano-composite CAD/CAM blocks (EB) under the same milling parameters. To assess the marginal and internal fit, the restorations were cemented to replicas and were embedded in an acrylic mold for sectioning at 0.5 mm intervals. The measured gap data were pooled according to the block types and measuring points for statistical analysis. RESULTS: Both the block type and measuring point significantly affected gap values, and their interaction was significant (p = 0.000). In crowns and inlays made from the two blocks, gap values were significantly larger in the occlusal area than in the axial area, while gap values in the marginal area were smallest (p < 0.001). Among the blocks, the restorations milled from EB had a significantly larger gap at all measuring points than those milled from LU (p = 0.000). CONCLUSIONS: The marginal and internal gaps of the two nano-composite CAD/CAM blocks differed according to the measuring points. Among the internal area of the two nano-composite CAD/CAM restorations, occlusal gap data were significantly larger than axial gap data. The EB crowns and inlays had significantly larger gaps than LU restorations.
Subject(s)
Humans , Computer-Aided Design , Crowns , Fungi , Inlays , Molar , ToothABSTRACT
OBJECTIVES: The purpose of this study was to compare the marginal and internal fit of nano-composite CAD-CAM restorations. MATERIALS AND METHODS: A full veneer crown and an mesio-occluso-distal (MOD) inlay cavity, which were prepared on extracted human molars, were used as templates of epoxy resin replicas. The prepared teeth were scanned and CAD-CAM restorations were milled using Lava Ultimate (LU) and experimental nano-composite CAD/CAM blocks (EB) under the same milling parameters. To assess the marginal and internal fit, the restorations were cemented to replicas and were embedded in an acrylic mold for sectioning at 0.5 mm intervals. The measured gap data were pooled according to the block types and measuring points for statistical analysis. RESULTS: Both the block type and measuring point significantly affected gap values, and their interaction was significant (p = 0.000). In crowns and inlays made from the two blocks, gap values were significantly larger in the occlusal area than in the axial area, while gap values in the marginal area were smallest (p < 0.001). Among the blocks, the restorations milled from EB had a significantly larger gap at all measuring points than those milled from LU (p = 0.000). CONCLUSIONS: The marginal and internal gaps of the two nano-composite CAD/CAM blocks differed according to the measuring points. Among the internal area of the two nano-composite CAD/CAM restorations, occlusal gap data were significantly larger than axial gap data. The EB crowns and inlays had significantly larger gaps than LU restorations.
Subject(s)
Humans , Computer-Aided Design , Crowns , Fungi , Inlays , Molar , ToothABSTRACT
96 anterior teeth with different degree of caries in 80 patients were randomly divided into 2 groups(n =48 teeth,40 patients). In the experimental group the teeth were repair with nanometer resin filling,in the control group with ceramic crown.In 0.5 to 1 year follow-up,the satisfaction rate and the clinical success rate were similar in the 2 groups(P >0.05).Application of nano resin aesthetic restoration can lower tooth injury,postoperative complications and the cost.
ABSTRACT
Objective To prepare a novel bioactive and degradable scaffold with mineralized collagenpolyose based composite by biomimetic synthesis for bone tissue engineering and explore the compatibility of osteoblast culturing on the scaffold. Methods Two kinds of polyelectrolyte were assembled on the surface of diatomite particles in order to adsorbe on nano-zirconia through opposite charges. Zeta potential,particle size and size distribution were compared before and after the modification of diatomite; IR was used to analysis molecular structure of functional group changes on the surface of diatomite particles, nano-composite powder morphology was observed by SEM. Results Two kinds of the polyelectrolyte were successfully assembled on the surface of diatomite powders. Particle size and size distribution were significantly reduced, d (0.5) reduce from 16.421 μm to 0.420 μm. SEM showed the dispersion of the modified diatomite was improved and had a good adsorption with nano-zirconia. Conclusion Layer-by-layer technique could enhance the dispersion of diatomite-based dental ceramic powders as well as a good adsorption of nano-composite ceramic powder.