ABSTRACT
Focal fibrous hyperplasia (FFH) is a pathology characterized by tissue enlargement as a result of increasing the number of inflammatory cells which receive chronic mechanical stimuli of low intensity that may affect gums, lip, palate, jugal mucosa and tongue.The aim of this article is to report a case of FFH on the lateral border on both sides of the tongue associated with the use of the Hyrax appliance in a hebiatric patient, whose chief complaint was chewing discomfort. This case was diagnosed clinically and by histopathology analysis and treated by surgical excision as well as the removal of Hyrax appliances. Follow-up care provided the recovery of the patient's quality of life.
La hiperplasia fibrosa focal (HFF) es una patología caracterizada por el aumento de tamaño de los tejidos como consecuencia del aumento del número de células inflamatorias que reciben estímulos mecánicos crónicos de baja intensidad que pueden afectar a encías, labio, paladar, mucosa yugal y lengua. El objetivo de este artículo es reportar un caso de FFH en el borde lateral a ambos lados de la lengua asociado al uso del aparato Hyrax en un paciente hebiátrico, cuyo principal motivo de consulta era la molestia masticatoria. Este caso fue diagnosticado clínicamente y por análisis histopatológico y tratado mediante escisión quirúrgica así como la retirada de los aparatos de Hyrax. La atención de seguimiento permitió la recuperación de la calidad de vida del paciente
ABSTRACT
ABSTRACT Introduction: The benefits and safety of using orthodontic aligners have been reported more by clinical experience and expert opinion than by scientific evidence. Another important aspect is that aligners are constantly evolving. It is important to obtain evidence that allows for new updates in manufacturing technology, in the development of new movement planning protocols, in the incorporation and design of attachments, and in the aid of skeletal anchorage. Methods: Evidence retrieved from six electronic databases (CINAHL, MEDLINE, EMBASE, Psych Info, the Cochrane Library and the Joanna Briggs Library) is presented by means of questions and answers. Conclusions: There is evidence that the aligners presented different levels of difficulty in performing each type of movement, with rotational and vertical movements being the most difficult to perform. Regarding perception of pain due to tooth movement, it seems to have less impact at the beginning of treatment; but dealing with more phonoarticulatory changes seems to require more treatment time in more complex cases. Aligners do not prevent the occurrence of root resorption, although the incidence and severity of resorption may be reduced, making oral hygiene easier and accepting the risk of white spots, caries and periodontal disease. Given the conflicting evidence, the release of bisphenol-A from the aligner cannot be denied. Solutions must be found to reduce the environmental impact of aligners disposal. There is an urgent need for well-designed randomized controlled trials.
RESUMO Introdução: As vantagens e desvantagens do uso de alinhadores ortodônticos têm sido reportadas com base mais na experiência clínica e opinião de experts do que em evidências científicas. Outro aspecto importante é que os alinhadores estão em processo de evolução constante. Assim, torna-se importante obter evidências recentes, que abranjam as novas atualizações na tecnologia de confecção, no desenvolvimento de novos protocolos de planejamento para as movimentações, a incorporação e desenho dos attachments e o auxílio da ancoragem esquelética. Métodos: As evidências encontradas em seis bases de dados eletrônicas (CINAHL, MEDLINE, EMBASE, Psych Info, Biblioteca Cochrane e Biblioteca Joanna Briggs) serão apresentadas por meio de perguntas e respostas. Conclusões: Há evidências de que os alinhadores apresentam diferentes níveis de dificuldade para realizar cada tipo de movimento, sendo os movimentos rotacionais e verticais os mais difíceis de serem executados. Quanto à percepção da dor causada pela movimentação dentária, parece haver menos impacto no início do tratamento, mas os alinhadores produzem mais alterações fonoarticulatórias e parecem exigir mais tempo de tratamento em casos mais complexos. Não há evidência de diferença na estabilidade pós-tratamento, e os alinhadores não impedem a ocorrência de reabsorção radicular, apesar da incidência e a gravidade da reabsorção poderem ser menores, facilitam a higiene bucal, reduzindo o risco de manchas brancas, cáries e doenças periodontais. Dada a evidência conflitante, a liberação de bisfenol-A pelo alinhador não pode ser negada. É preciso encontrar soluções que reduzam o impacto ambiental do descarte dos alinhadores. Há uma necessidade urgente de ensaios clínicos randomizados bem desenhados.
ABSTRACT
Abstract Introduction: Obstructive sleep apnea syndrome is a common condition in childhood and if left untreated can result in many health problems. An accurate diagnosis of the etiology is crucial for obstructive sleep apnea treatment success. Functional orthodontic appliances that stimulate mandibular growth by forward mandibular positioning are an alternative therapeutic option in growing patients. Objective: To perform a literature review about the effects of functional orthodontic appliances used to correct the mandibular deficiency in obstructive sleep apnea treatment. Methods: The literature search was conducted in June 2020 using Cochrane Library; PubMed, EBSCO (Dentistry & Oral Sciences Source), LILACS Ovid; SciELO Web of Science; EMBASE Bireme and BBO Bireme electronic databases. The search included papers published in English, until June 2020, whose methodology referred to the types and effects of functional orthopedic appliances on obstructive sleep apnea treatment in children. Results: The search strategy identified thirteen articles; only four articles were randomized clinical studies. All studies using the oral appliances or functional orthopedic appliances for obstructive sleep apnea in children resulted in improvements in the apnea-hypopnea index score. The cephalometric (2D) and tomographic (3D) evaluations revealed enlargement of the upper airway and increase in the upper airspace, improving the respiratory function in the short term. Conclusion: Functional appliances may bean alternative treatment for obstructive sleep apnea, but it cannot be concluded that they are effective in treating pediatric obstructive sleep apnea. There are significant deficiencies in the existing evidence, mainly due to absence of control groups, small sample sizes, lack of randomization and no long-term results.
Resumo Introdução: A síndrome da apneia obstrutiva do sono é uma condição comum na infância e, se não tratada, pode resultar em muitos problemas de saúde. Um diagnóstico preciso da etiologia é crucial para o sucesso do tratamento dessa condição clínica. Aparelhos ortodônticos funcionais que estimulam o crescimento mandibular através do anteroposicionamento mandibular são uma opção terapêutica para pacientes em crescimento. Objetivo: Fazer uma revisão da literatura sobre os efeitos do aparelho ortodôntico funcional usado para corrigir a deficiência mandibular no tratamento da apneia obstrutiva do sono. Método: A pesquisa bibliográfica foi feita em junho de 2020 nos os bancos de dados eletrônicos da Cochrane Library; PubMed, EBSCO (Dentistry & Oral Sciences Source), Lilacs Ovid; SciELO Web of Science; Embase Bireme e BBO Bireme. A busca incluiu artigos publicados em inglês, até junho de 2020, cuja metodologia referia-se aos tipos e efeitos dos aparelhos ortopédicos funcionais no tratamento da apneia obstrutiva do sono em crianças. Resultados: A estratégia de busca identificou 19 artigos; apenas quatro eram estudos clínicos randomizados. Todos os estudos que usaram aparelhos orais ou aparelhos ortopédicos funcionais para apneia obstrutiva do sono em crianças resultaram em melhorias no índice de apneia-hipopneia. As avaliações cefalométrica (2D) e tomográfica (3D) mostraram alargamento das vias aéreas superiores e aumento do espaço das vias aéreas superiores, que melhoraram a função respiratória em curto prazo. Conclusão: Os aparelhos funcionais podem ser um tratamento opcional para apneia obstrutiva do sono, mas não é possível concluir que sejam eficazes na população pediátrica. Existem deficiências significativas nas evidências existentes, principalmente devido à ausência de grupos de controle, tamanho pequeno das amostras, falta de randomização e ausência de resultados em longo prazo.
Subject(s)
Humans , Child , Orthodontic Appliances, Functional , Mandibular Advancement , Sleep Apnea, Obstructive/therapy , Cephalometry , Treatment OutcomeABSTRACT
This article presents a successful orthodontic management of a 12-year-old male using a fixed orthodontic appliance (straight wire technique). His orthodontic treatment was hinged on creating enough space to accept an artificial tooth, correcting the horizontal and vertical relationships of the upper incisors to the lower and the midline shift. Ultimately, an esthetic smile was achieved; function and self-esteem were improved when the artificial tooth was finally fixed.
Subject(s)
Humans , Tooth , Orthodontic Appliances, Fixed , Esthetics, Dental , NigeriaABSTRACT
ABSTRACT Objective: This study evaluated the dental, skeletal and soft tissue effects in Class II malocclusion patients treated with Distal Jet appliance, compared to an untreated control group. Methods: 44 patients with Class II malocclusion were divided into two groups: Group 1 (experimental) - 22 patients, mean age of 12.7 years, treated with the Distal Jet appliance for a mean period of 1.2 years; Group 2 (control) - 22 untreated patients, mean age of 12.2 years, followed by a mean period of 1.2 years. Lateral cephalograms were obtained before treatment (T0) and at the end of the distalization (T1).Independent t test was used to identify intergroup differences. Results: When compared to control group, the Distal Jet produced a significant increase in mandibular plane angle (0.7 ± 2.0o). The maxillary second molars presented distal inclination (6.6 ± 3.8o), distalization (1.1 ± 1.1 mm) and extrusion (1.3 ± 2.1 mm). The maxillary first molars distalized by 1.2 ± 1.4 mm. The maxillary first premolars mesialized by 3.4 ± 1.1 mm. The maxillary incisors showed slight labial tipping of 4.3 ± 4.7o and were protruded by 2.4 ± 1.7 mm. There were no significant changes in the facial profile. The overjet increased 1.5 ± 1.1 mm and overbite had no significant changes. Conclusion: The Distal Jet appliance is effective to distalize the maxillary first molars, but promotes increase in mandibular plane angle, distal inclination, extrusion and distalization of maxillary second molars, mesialization of maxillary first premolars, proclination and protrusion of maxillary incisors, and increase in overjet, when compared to a control group.
RESUMO Objetivo: o presente estudo avaliou os efeitos dentoesqueléticos e tegumentares em pacientes com má oclusão de Classe II tratados com aparelho Distal Jet, comparando-os com um grupo controle não tratado. Métodos: 44 pacientes com má oclusão de Classe II foram divididos em dois grupos: Grupo 1 (experimental) - 22 pacientes, idade média de 12,7 anos, tratados com o aparelho Distal Jet por um período médio de 1,2 anos; Grupo 2 (controle) - 22 pacientes não tratados, idade média de 12,2 anos, acompanhados por um período médio de 1,2 anos. Telerradiografias laterais foram obtidas antes do tratamento (T0) e no final da distalização (T1). O teste t independente foi usado para identificar as diferenças entre os grupos. Resultados: quando comparado ao grupo controle, o Distal Jet produziu um aumento significativo no ângulo do plano mandibular (0,7 ± 2,0o). Os segundos molares superiores apresentaram inclinação distal (6,6 ± 3,8o), distalização (1,1 ± 1,1 mm) e extrusão (1,3 ± 2,1 mm). Os primeiros molares superiores foram distalizados por 1,2 ± 1,4 mm. Os primeiros pré-molares superiores, mesializados por 3,4 ± 1,1 mm. Os incisivos superiores mostraram leve inclinação labial de 4,3 ± 4,7o e foram protruídos por 2,4 ± 1,7 mm. Não existiram alterações significativas no perfil facial. O overjet aumentou 1,5 ± 1,1 mm, e o overbite não sofreu alterações significativas. Conclusão: o aparelho Distal Jet é eficaz para distalizar os primeiros molares superiores, mas promove aumento no ângulo do plano mandibular, inclinação distal, extrusão e distalização dos segundos molares superiores, mesialização dos primeiros pré-molares superiores, vestibularização e protrusão dos incisivos superiores e aumento do overjet, quando comparado a um grupo de controle.
Subject(s)
Humans , Child , Orthodontic Appliance Design , Malocclusion, Angle Class II , Tooth Movement Techniques , Cephalometry , Prospective Studies , MaxillaABSTRACT
ABSTRACT Objective: This study aimed at comparing the dentoskeletal changes in patients with Class II division 1 malocclusion, treated with three types of fixed functional appliances. Methods: A sample comprising 95 patients with the same malocclusion, retrospectively selected, and divided into four groups, was used: G1 consisted of 25 patients (mean age 12.77 ± 1.24 years) treated with Jasper Jumper appliance; G2, with 25 patients (mean age 12.58 ± 1.65 years) treated with the Herbst appliance; G3, with 23 patients (mean age 12.37 ± 1.72 years) treated with the Mandibular Protraction Appliance (MPA); and a Control Group (CG) comprised of 22 untreated subjects (mean age 12.66 ± 1.12 years). Intergroup comparison was performed with ANOVA, followed by Tukey test. Results: The Jasper Jumper and the Herbst group showed significantly greater maxillary anterior displacement restriction. The Jasper Jumper demonstrated significantly greater increase in the mandibular plane angle, as compared to the control group. The MPA group demonstrated significantly greater palatal inclination of the maxillary incisors. Vertical development of the maxillary molars was significantly greater in the Herbst group. Conclusions: Despite some intergroup differences in the amount of dentoskeletal changes, the appliances were effective in correcting the main features of Class II malocclusions.
RESUMO Objetivo: o objetivo do presente estudo foi comparar as alterações dentoesqueléticas em pacientes com má oclusão de Classe II, divisão 1, tratados com três tipos de aparelhos funcionais fixos. Métodos: a amostra compreendeu 95 pacientes, selecionados retrospectivamente e divididos em quatro grupos: G1, composto por 25 pacientes (idade média de 12,77 ± 1,24 anos), tratados com aparelho Jasper Jumper; G2, com 25 pacientes (idade média de 12,58 ± 1,65 anos), tratados com aparelho Herbst; G3, com 23 pacientes (idade média de 12,37 ± 1,72 anos), tratados com o Aparelho de Protração Mandibular (APM); e um Grupo Controle (GC), composto por 22 sujeitos não tratados (idade média de 12,66 ± 1,12 anos) que apresentavam a mesma má oclusão. A comparação intergrupos foi realizada com ANOVA, seguida do teste Tukey. Resultados: os grupos Jasper Jumper e Herbst apresentaram significativamente maior restrição de deslocamento anterior da maxila. O Jasper Jumper demonstrou aumento significativamente maior no ângulo do plano mandibular, em comparação ao grupo controle. O grupo APM demonstrou inclinação palatina significativamente maior dos incisivos superiores. O desenvolvimento vertical dos molares superiores foi significativamente maior no grupo Herbst. Conclusões: apesar de algumas diferenças intergrupos na quantidade de alterações dentoesqueléticas, os aparelhos foram eficazes na correção das principais características das más oclusões de Classe II.
Subject(s)
Humans , Child , Adolescent , Orthodontic Appliances, Functional , Malocclusion, Angle Class II , Activator Appliances , Cephalometry , Retrospective Studies , Orthodontic Appliances, FixedABSTRACT
ABSTRACT Introduction: Skeletal Class III malocclusion is one of the most challenging malocclusions to treat. In around 40% of Class III patients, maxillary retrognathia is the main cause of the problem and in most patients, orthopedic/surgical treatments includes some type of maxillary protraction. Objective: The aim of this case report was to describe a treatment method for a patient with maxillary retrognathia and Class III skeletal discrepancy using mandibular and maxillary skeletal anchorage with intermaxillary elastics. Case report: A 13-year-old boy with maxillary retrognathia and mandibular prognathism was treated using bilateral miniplates. Two miniplates were inserted in the mandibular canine area and two other miniplates were placed in the infrazygomatic crests of the maxilla. Class III intermaxillary elastics were used between the miniplates. Results: After eight months of orthopedic therapy, ANB angle increased by 4.1 degrees and ideal overjet and overbite were achieved. Mandibular plane angle was increased by 2.1 degrees and the palatal plane was rotated counterclockwise by 4.8 degrees. Conclusion: This case showed that the skeletal anchorage treatment method may be a viable option for treating patients with Class III skeletal malocclusion.
RESUMO Introdução: a Classe III esquelética é considerada uma das más oclusões mais difíceis de se tratar. Em cerca de 40% dos pacientes afligidos por ela, a principal causa do problema é o retrognatismo maxilar e, na maioria desses pacientes, o tratamento ortopédico/cirúrgico inclui algum tipo de protração da maxila. Objetivo: o objetivo do presente relato de caso é descrever o método de tratamento de um paciente Classe III com discrepância esquelética e retrognatismo maxilar, usando elásticos intermaxilares e ancoragem esquelética superior e inferior. Relato de caso: paciente de 13 anos de idade, com retrognatismo maxilar e prognatismo mandibular, tratado com miniplacas inseridas bilateralmente. Duas miniplacas foram instaladas na região dos caninos inferiores, e outras duas miniplacas foram inseridas na região da crista infrazigomática maxilar. Elásticos intermaxilares de Classe III foram conectados às miniplacas. Resultados: após 8 meses de tratamento ortopédico, o ângulo ANB aumentou 4,1o e obteve-se sobressaliência e sobremordida ideais. O ângulo do plano mandibular aumentou 2,1o e o plano palatal girou 4,8o no sentido anti-horário. Conclusão: esse caso clínico demonstrou que o método de tratamento com ancoragem esquelética pode ser uma opção válida para pacientes com má oclusão de Classe III esquelética.
Subject(s)
Humans , Male , Adolescent , Orthodontic Anchorage Procedures , Malocclusion, Angle Class III , Cephalometry , Mandible , MaxillaABSTRACT
Background: Human saliva has got many important functions like lubrication of the oral tissues, making oral functions like speech, mastication and deglutition possible and also protecting teeth and oral mucosal surfaces in different ways. Dental Caries is one of the common complications in patients undergoing orthodontic treatment. Subjects with impaired saliva flow rate often show high caries incidence. A low flow rate combined with a low or moderate buffer effect clearly indicates poor salivary resistance against microbial attack. Aim: To investigate the changes in stimulated and unstimulated salivary flow rate, pH and buffer capacity in patients undergoing therapy with fixed orthodontic appliances. Materials and Methods: Salivary flow rate, pH and buffering capacity of 20 patients who underwent fixed orthodontic treatment at Department of Orthodontics, Ragas Dental College and Hospital, Chennai were examined using GC saliva check buffer kit. The procedure was carried out during the initiation of orthodontic treatment and subsequently, one month and six months after the placement of appliance. Results: Results showed there was a significant increase in the salivary flow rate one month and six months after placement of fixed appliance while pH and buffering capacity showed no significant changes. Conclusion: Salivary flow rate increases significantly during fixed orthodontic treatment. Salivary pH and buffering capacity showed no significant changes suggesting that they are not sole factors for demineralization in orthodontic patients.
ABSTRACT
@#This research aimed to evaluate the oral hygiene status in fixed orthodontic appliance patients when using two different slim bristles toothbrushes and to assess patients’ toothbrush perception. Twenty six fixed orthodontic appliance patients participated in the six weeks prospective, crossover clinical trial. All patients used two different slim bristles toothbrushes (Toothbrush A and Toothbrush B) for two weeks each with a washout period in between. Gingival health and plaque value were assessed based on Lӧe & Silness Gingival Index and Silness & Lӧe Plaque Index at baseline, week 2, week 4 (washout) and week 6. At the end of the trial, patients’ toothbrush perception was assessed through questionnaire. All data were analysed using SPSS version 22. The mean age of the patients was 21.5 ± 4.3 years, with female predominant (n= 17, 65.4%). More than half were Malay (n= 15, 57.7%) and had tertiary education (n=14, 53.8%). Patients could achieve good oral hygiene when using Toothbrush A (65.4%) and Toothbrush B (69.2%). However, the occurrence of gingivitis was significantly higher when using Toothbrush A (OR=1.889, 95% CI=1.207-2.957, p value < 0.05). Toothbrush B was felt to clean better (n= 14, 53.8%) while Toothbrush A was perceived to be easier to use (n=14, 53.8%). Both toothbrushes maintained patients’ oral hygiene status. However, when using Toothbrush B, oral health status was better as it significantly reduced gingivitis occurrence compared to Toothbrush A. As for the toothbrush perception, most patients preferred Toothbrush A to be taken home.
ABSTRACT
@#Oral candidiasis is an opportunistic infection of the oral cavity. This study aimed to determine prevalence of oral candidiasis in patients with palatal coverage orthodontic appliances and prostheses and its risk factors. Three groups of patients were recruited after an informed consent. The two tested groups were the denture and the upper removable orthodontic appliance (URA) groups while patients with no prosthesis/appliance acted as control. The assessments included demographic profile, denture/URA age, night-time wearing and duration of wearing. Signs and symptoms of candidiasis were examined intra-orally. Unstimulated salivary flow rate test was also performed. Smears samples were taken from palatal mucosa and impression surfaces of denture/URA and stained with Periodic Acid Schiff (PAS). The data were analysed using descriptive and chisquare tests. A total of 86 patients were recruited; denture (n=30), URA (n=22), control (n=34). Denture and URA groups had significantly more positive cases of candidal infection (56.7 and 72.7% respectively) as compared to control group (20.6%). Among the subjects with oral candidiasis, denture patients were detected to have more severe amount of candidal hyphae (20%) than URA (13.6%) group. The relationships between oral candidiasis and these risk factors i.e. age, night-time wearing, daily total hours of wearing and denture/URA hygiene were statistically significant (p<0.05). Thus, patients who are wearing palatal coverage removable appliances or prostheses have higher prevalence of oral candidiasis. The risk is greater with confounding factors such as age, duration of wearing and oral hygiene
ABSTRACT
Abstract The aim of this study was to assess, correlate, and compare users' perceptions and preference related to maxillary removable retainers. Volunteers were recruited to use four retainer types: conventional wrap-around (CWA), wrap-around with an anterior opening (OWA), "U" wrap-around (UWA), and clear thermoplastic retainer (CT). The main outcomes were the volunteers' perceptions, evaluated with a 100-mm visual analogue scale, and their preferred retainer. The retainers were used for 21 days each (washout intervals of 7 days). Nineteen volunteers (27 ± 4.53 years) were randomly divided into four groups that used the four retainers, but with a different sequence. Perceptions were evaluated immediately after the use of each retainer and the preference at the end of the research. Repeated measures ANOVA and Friedman tests with post-hoc Tukey's test (intergroup comparisons), and Pearson and Spearman analyses (correlations between perceptions) were applied. The WA retainers did not significantly differ among themselves. The CT was rated significantly worse in speech (p ≤ 0.001), discomfort (p < 0.001), and occlusal interference (p < 0.001), and did not significantly differ from the others in esthetics. Users preferred significant more the WA retainers in comparison with the CT retainers. The occlusal interference caused by the CT was positively correlated to other perceptions, such as changes in speech and discomfort. WA retainers presented similar preference and perceptions, but were significantly better than the CT. The CT occlusal coverage appeared to be the primary cause of its rejection.
Subject(s)
Humans , Male , Female , Adult , Young Adult , Orthodontic Appliance Design/statistics & numerical data , Orthodontic Retainers/standards , Patient Preference/statistics & numerical data , Reference Values , Analysis of Variance , Treatment Outcome , Statistics, Nonparametric , Cross-Over Studies , Visual Analog Scale , MaxillaABSTRACT
Aim: The aim of this study was to verify the frictional force during sliding mechanics in orthodontic tooth movement, using conventional metal brackets of the active and passive self-ligating types with stainless steel and copper nickel titanium archwires. Methods: This experimental in vitro study was conducted with conventional metal (Morelli, Sorocaba, SP, Brazil) brackets, active self-ligated (SLI Morelli, Sorocaba, SP, Brazil) and passive self-ligated (SLP Morelli, Sorocaba, SP, Brazil), with slot 0.022 x 0.028 inches and Roth prescription. The brackets were tested with rectangular section 0.019 x 0.025 inch copper nickel titanium and stainless steel archwires. For each type of bracket, 10 sets of plate/bracket/archwire segment (n=10) were fabricated. Non-parametric Kruskal Wallis and Dunn tests were used for comparison between types of brackets and Wilcoxon tests for comparison between types of archwires. Results: The results showed that the frictional force values were higher with copper nickel titanium than with stainless steel archwires (p<0.05). When copper nickel titanium archwires were used, the active self-ligating brackets showed higher frictional force values than the other types, followed by the conventional brackets. Lower frictional force values were observed with passive self-ligating brackets. For stainless steel archwires, no difference was observed between conventional and active self-ligating brackets, the passive self-ligating type presented lower frictional force values than the others. Conclusion: It was concluded that the higher frictional force was observed when active self-ligating brackets were associated with copper nickel titanium archwires. Lower frictional force was verified between passive self-ligating brackets combined with stainless steel archwires
Subject(s)
Orthodontic Brackets , Orthodontic Appliance Design , Orthodontic FrictionABSTRACT
ABSTRACT Introduction: The T-loop as designed by Burstone is a space closure spring used in the rational application of orthodontic biomechanics. Despite the diversity of studies, there is still no consensus on the optimal parametric characteristics for its conformation. Objective: This study aimed at reviewing the literature on the force systems released by different conformations of the T-loop, according to the type of anchorage and the main characteristics and factors that influence them. Results: Comparing the studies, the need for standardization was perceived in the methodology to shape the loops, regarding the variables that influence the force system. Most of the experimental studies with this loop do not report the vertical movement, nor the steps and angles that occur in the brackets. Clinical studies have obtained more variable results in relation to vertical acting forces, considering the influence of chewing. Conclusion: There is great potential for future studies with this type of loop, especially using nickel-titanium alloys, in order to achieve a pure translational movement without friction, with optimal and constant levels of force.
RESUMO Introdução: a alça T preconizada por Burstone é um instrumento de fechamento de espaços utilizado na aplicação racional da biomecânica ortodôntica, dentro da técnica do arco segmentado. Apesar da diversidade de estudos, ainda não há consenso quanto às características paramétricas ótimas para a sua conformação. Objetivo: esse estudo teve como objetivo revisar a literatura sobre os sistemas de forças liberados por diferentes conformações da alça T, de acordo com o tipo de ancoragem necessária, salientando suas principais características e os fatores que as influenciam. Resultados: comparando-se os estudos, foi perceptível a necessidade de padronização da metodologia usada para conformar as alças, levando em consideração as variáveis que exercem influência no sistema de forças, de forma a se obter sistemas mais acurados, permitindo a realização de testes mais precisos e uma comparação mais eficaz dos estudos. A maioria dos estudos experimentais com esse tipo de alça não relata a movimentação vertical, nem os degraus e ângulos que ocorrem nos braquetes. Estudos clínicos obtiveram resultados menos rígidos em relação às forças verticais atuantes, levando em consideração a influência da mastigação. Conclusões: há grande potencial para futuros estudos com esse tipo de alça, especialmente utilizando ligas de níquel-titânio, para que se chegue cada vez mais perto de um movimento de translação puro e sem atrito, com níveis de força ótimos e constantes.
Subject(s)
Humans , Orthodontic Wires , Orthodontic Appliance Design , Orthodontic Space Closure/instrumentationABSTRACT
Aproximadamente um terço dos pacientes com atresia maxilar apresenta uma constrição mais acentuada da distância intercaninos, quando comparada à distância intermolares superiores. Nesses casos, uma quantidade de expansão individualizada é requerida nas regiões anterior e posterior do arco dentário a fim de prevenir a sobre-expansão na região dos pré-molares e molares, redundando num risco aumentado de deiscências ou fenestrações ósseas vestibulares. Uma alternativa clínica para a correção transversal, nesses casos, é a utilização do Expansor Maxilar Diferencial (EMD). Esse aparelho ortopédico com dois parafusos permite realizar uma expansão diferencial significantemente maior na região anterior, quando comparada à região posterior do arco dentário superior. O objetivo deste artigo é relatar um caso clínico de uma paciente do sexo feminino, na dentadura permanente jovem, com mordida cruzada posterior, tratada de forma individualizada e eficiente com o EMD. (AU)
Approximately one third of patients with maxillary atresia show greater constriction of intercanine distance compared to the intermolar distance. In these cases, an individualized amount of expansion is required in the anterior and posterior regions of the dental arch, in order to prevent overexpansion in the premolar and molar region, resulting in increased risk of dehiscence or bone fenestration. A clinical alternative for transverse correction in these cases is the Differential Maxillary Expander (DME). This orthopedic expander with two screws allows accomplishing a significantly greater differential expansion in the anterior region compared to the posterior region of the maxillary dental arch. The aim of this article is to report a clinical case of a female patient in the early permanent dentition with posterior crossbite that was individually and efficiently treated using the DME.(AU)
Subject(s)
Humans , Female , Child , Orthodontic Appliance Design , Orthodontics, Interceptive , Palatal Expansion TechniqueABSTRACT
Objective To develop a Class Ⅲ twin-block magnetic orthopedic appliance (TMOA-Ⅲ) and to investigate the treatment effects of this appliance on skeletal Class Ⅲ malocclusion of mixed dentition and early permanent dentition.Methods The sample consisted of 76 Chinese children (42 males and 34 females,mean age 9.1 years) with Class Ⅲ malocclusion caused by maxillary retrognathism,and the subjects were divided into a treatment group and a control group.The treatment group,38 subjects (21 males and 17 females),were instructed to wear TMOA-Ⅲ for 5-8 months (mean 7.5 months) and the control group,38 subjects (21 males and 17 females),did not wear any appliance.Cephalometric radiographs were taken and measurement data were used for analysis.Results Compared with the control group,patients of the treatment group showed a favorable increase of maxilla length and anterior movement (PNS-A,P＜0.001;SNA,A-NPg,P＜0.05),and skeletal Class Ⅲ facial profiles improved (UL-EL,NsPgs-HL,Facial convexity,P ＜ 0.001;LL-EL P ＜ 0.005).Conclusions The results indicate that TMOA-Ⅲ is effective for the treatment of Class Ⅲ malocclusion caused by maxillary retrognathism in mixed dentition and early permanent dentition,which provides another choice for the treatment besides the face mask.
ABSTRACT
Introdução: O aparelho ortopédico mecânico Herbst destaca-se entre os aparelhos que estimulam o avanço mandibular. Objetivo: Esse artigo demonstra diferentes formas de ancoragem para o aparelho Herbst. Método: Descrevem-se formas distintas de ancoragem, variando desde ancoragem com banda ortodôntica, com esplinte acrílico, com esplinte metálico, associadas ou não ao parafuso expansor. Conclusão: A escolha do tipo de ancoragem para o aparelho Herbst é dependente do plano de tratamento ortodôntico e definida de forma individual para cada paciente.
Introduction: Herbst mechanical orthopedic device stands out among the devices that stimulate the mandibular advancement. Objective: This paper describes different forms of Herbst appliance anchorage. Method: Distinct forms of Herbst appliance anchorage are described varying from orthodontic band, acrylic splint, metallic splint ancorage associated or not with expansion screw. Conclusions: The choice of Herbst appliance anchorage is dependent of orthodontic treatment planning and defined individually for each patient.
Subject(s)
Humans , Malocclusion, Angle Class II , Mandibular Advancement , Orthodontic Anchorage Procedures , Orthodontic Appliance Design , Orthodontic Appliances, Functional , Orthodontics/methodsABSTRACT
The presence of fixed orthodontic appliances and its accessories tends to affect bacterial plaque removal, resulting in inadequate cleaning being performed by the patient. Thus, the aim of this systematic review and meta-analysis was to answer the following focal question: are the mechanical methods of oral cleaning effective for the reduction of bacterial dental plaque in patients with a fixed orthodontic appliance? A systematic search of the literature was conducted in the following databases: Scopus, PubMed, Cochrane, Web of Science, Embase, and Medline, in addition to Controlled Trials and Grey Literature, without limitations of language and year of publication. Furthermore, searches were also conducted in the reference lists of the articles selected. Included in the present review were clinical studies with patients undergoing therapy with fixed orthodontic appliances, which would, by means of comparison, evaluate the effectiveness of different mechanical bacterial plaque removal methods. The methodological quality of the articles included was evaluated in accordance with the methodological evaluation protocol, and was classified as high, moderate or low. In order to perform the meta-analysis, articles with high methodological quality were included. Analysis of subgroups was performed according to the type of intervention. The plaque index was defined as the continuous outcome variable, using the fixed effect when there was homogeneity among the articles, and the random effect in cases of heterogeneity. 1815 articles were found, of which only 23 fulfilled the eligibility criteria, with 17 being of high methodological quality and 6 of moderate quality. Of these, 18 included an analysis of the effectiveness of the conventional manual brush, 4 of the manual orthodontic brush,15 of electric brushes, 3 of interdental brushes, 1 of dental floss and 4 or oral irrigation devices, and 1 of Siwak. In the qualitative evaluation of the studies, the use of these mechanical control methods was shown to be effective, with exception of the use of Siwak, which presented an increase in bacterial plaque. Moreover, the results of the meta-analysis indicated a significant reduction of -0.98 (IC 95%) in the plaque index for the use of conventional manual brushes in the period of one month (p<0.001). There is a body of evidence that proves the effectiveness of mechanical bacterial plaque removal in patients using orthodontic appliances and accessories. The findings of the meta-analysis proved the effectiveness of the conventional manual brush. Further studies with better standardization of samples are required to strengthen the evidences.
A presença de aparelhos ortodônticos fixos e seus acessórios tende a afetar a remoção da placa bacteriana, resultando em limpeza inadequada realizada pelo paciente. Assim, o objetivo desta revisão sistemática e metaanálise foi responder à seguinte questão norteadora: os métodos mecânicos de limpeza oral são eficazes para a redução da placa bacteriana dental em pacientes com aparelho ortodôntico fixo? Uma pesquisa sistemática da literatura foi realizada nas seguintes bases de dados: Scopus, PubMed, Cochrane, Web of Science, Embase e Medline, além de Ensaios Controlados e Literatura Cinzenta, sem limitações de idioma e ano de publicação. Além disso, as pesquisas também foram realizadas nas listas de referência dos artigos selecionados. Foram incluídos na presente revisão estudos clínicos realizados com pacientes submetidos à terapia com aparelhos ortodônticos fixos, os quais, por meio de comparação, avaliaram a eficácia de diferentes métodos mecânicos de remoção de placas bacterianas. A qualidade metodológica dos artigos incluídos foi avaliada de acordo com o protocolo de avaliação metodológica, e classificada como alta, moderada ou baixa. Para realização da metanálise, foram incluídos artigos de alta qualidade metodológica. A análise dos subgrupos foi realizada de acordo com o tipo de intervenção. O índice de placa foi definido como variável de desfecho contínuo, utilizando o efeito fixo quando houve homogeneidade entre os artigos e o efeito aleatório nos casos de heterogeneidade. 1815 artigos foram encontrados, dos quais apenas 23 preencheram os critérios de elegibilidade, sendo 17 de alta qualidade metodológica e 6 de qualidade moderada. Destes, 18 incluíram uma análise da eficácia da escova manual convencional, 4 da escova ortodôntica manual, 15 de escovas elétricas, 3 de escovas interdentais, 1 de fio dental e 4 de dispositivos de irrigação oral e 1 de Siwak. Na avaliação qualitativa dos estudos, a utilização destes métodos mecânicos de controle mostrou-se efetiva, com exceção do uso de Siwak, que apresentou aumento na placa bacteriana. Além disso, os resultados da meta-análise indicaram uma redução significativa de -0,98 (IC 95%) no índice de placa para o uso de escovas manuais convencionais no período de um mês (p <0,001). Existe um conjunto de provas que comprovam a eficácia da remoção de placas bacterianas mecânicas em pacientes que utilizam aparelhos e acessórios ortodônticos. Os resultados da metanálise provaram a eficácia da escova manual convencional. Outros estudos com melhor padronização de amostras são necessários para fortalecer as evidências.
Subject(s)
Oral Hygiene , Orthodontic Appliances , Dental PlaqueABSTRACT
Abstract The objective of this study was to compare coating dimensions and surface characteristics of two different esthetic covered nickel-titanium orthodontic rectangular archwires, as-received from the manufacturer and after oral exposure. The study was designed for comparative purposes. Both archwires, as-received from the manufacturer, were observed using a stereomicroscope to measure coating thickness and inner metallic dimensions. The wires were also exposed to oral environment in 11 orthodontic active patients for 21 days. After removing the samples, stereomicroscopy images were captured, coating loss was measured and its percentage was calculated. Three segments of each wire (one as-received and two after oral exposure) were observed using scanning electron microscopy for a qualitative analysis of the labial surface of the wires. The Lilliefors test and independent t-test were applied to verify normality of data and statistical differences between wires, respectively. The significance level adopted was 0.05. The results showed that the differences between the wires while comparing inner height and thickness were statistically significant (p < 0.0001). In average, the most recently launched wire presented a coating thickness twice that of the control wire, which was also a statistically significant difference. The coating loss percentage was also statistically different (p = 0.0346) when the latest launched wire (13.27%) was compared to the control (29.63%). In conclusion, the coating of the most recent wire was thicker and more uniform, whereas the control had a thinner coating on the edges. After oral exposure, both tested wires presented coating loss, but the most recently launched wire exhibited better results.
Subject(s)
Humans , Orthodontic Wires , Titanium/chemistry , Orthodontic Appliance Design , Coated Materials, Biocompatible/chemistry , Nickel/chemistry , Reference Values , Surface Properties , Time Factors , Materials Testing , Microscopy, Electron, Scanning , Orthodontic Brackets , Esthetics, Dental , Mouth/chemistryABSTRACT
60 cases(aged 18-40 years) underwent orthodontic treatment were divided into 2 groups.30 patients in group A were treated with invisible aligners,while 30 in group B with fixed orthodontic appliance.Periodontal indices (PI,GI,SBI,PD)were examined before treatment,6 weekes,6 months and 12 months after treatment.Before and 6 weeks after treatment the indices were not statistically different between groups,6 and 12 months after treatment the indices of group A were lower than those of group B (P ＜ 0.05).The invisalign appliance is more propitious to periodontal health than the fixed orthodontic appliance.
ABSTRACT
ABSTRACT Introduction: Skeletal Class III malocclusion is often referred for orthodontic treatment combined with orthognathic surgery. However, with the aid of miniplates, some moderate discrepancies become feasible to be treated without surgery. Objective: To report the case of a 24-year-old man with severe skeletal Angle Class III malocclusion with anterior crossbite and a consequent concave facial profile. Methods: The patient refused to undergo orthognathic surgery; therefore, orthodontic camouflage treatment with the aid of miniplates placed on the mandibular arch was proposed. Results: After 18 months of treatment, a Class I molar and canine relationship was achieved, while anterior crossbite was corrected by retraction of mandibular teeth. The consequent decrease in lower lip fullness and increased exposure of maxillary incisors at smiling resulted in a remarkable improvement of patient's facial profile, in addition to an esthetically pleasing smile, respectively. One year later, follow-up revealed good stability of results.
RESUMO Introdução: a má oclusão de Classe III esquelética é frequentemente tratada com associação entre Ortodontia e Cirurgia Ortognática. No entanto, com o auxílio das miniplacas, discrepâncias moderadas tornaram-se passíveis de serem tratadas sem a necessidade de cirurgia ortognática. Objetivo: relatar o caso de um paciente de 24 anos, com má oclusão de Classe de III Angle e Classe III esquelética, mordida cruzada anterior e consequente perfil facial côncavo. Métodos: o paciente recusou-se a realizar a cirurgia ortognática, assim, foi proposta a compensação da má oclusão com o auxílio de miniplacas na arcada inferior. Resultados: após 18 meses de tratamento, foram obtidas relações de molares e caninos em Classe I, e a mordida cruzada anterior foi corrigida, por meio da distalização de todos os dentes inferiores. A consequente redução na projeção do lábio inferior, associada à maior exposição dos incisivos superiores no sorriso, resultou em um perfil facial consideravelmente mais agradável e um sorriso esteticamente melhor, respectivamente. A análise um ano após o tratamento revelou boa estabilidade dos resultados obtidos.