Algoritmo para la selección de colgajos perforantes perimamarios en reconstrucción inmediata poscirugía conservadora / Algorithm to select chest wall perforator flaps in immediate conservative breast surgery reconstruction

RESUMEN Antecedentes: los colgajos perforantes perimamarios son de gran utilidad en la reconstrucción mamaria inmediata en cirugía conservadora. Objetivo: describir los resultados del empleo de un algoritmo sobre colgajos perforantes perimamarios en la reconstrucción mamaria inmediata después de cirugía conservadora por cáncer de mama. Material y métodos: se llevó a cabo un estudio retrospectivo descriptivo. Se revisaron las historias clínicas de las pacientes operadas entre enero de 2020 y diciembre de 2022 por carcinoma de mama con cirugía conservadora y que requirieron reconstrucción con colgajos perimamarios. Las indicaciones incluyeron déficit de volumen, defecto de contorno y asimetría. Se evaluó el pedículo vascular del colgajo mediante Doppler color en todos los casos, lo que permitió seguir un algoritmo para la selección de la mejor opción de colgajo. Resultados: se realizaron 20 colgajos en 19 pacientes. Promedio de edad: 52 años ± 11 (rango 30-76). No existieron complicaciones intraoperatorias. Una paciente requirió reoperación por compresión del pedículo vascular del colgajo por hematoma, con la pérdida parcial, y otro colgajo sufrió epidermólisis superficial. No hubo pérdidas totales de ningún colgajo. Todas recibieron radioterapia posoperatoria y no experimentaron pérdida de volumen ni retracciones. Con un promedio de seguimiento de 15 meses, las pacientes valoraron los resultados a 6 meses como excelente en 7, bueno en 11 y regular en 2. Conclusión: la selección de colgajos perforantes locales para corregir defectos mamarios después de cirugía conservadora, mediante el examen con Doppler color preoperatorio para la identificación del pedículo vascular y un algoritmo específico, permitió obtener resultados estéticos satisfactorios sin requerir elementos aloplásticos ni revisiones posteriores.

ABSTRACT Background: Chest wall perforator flaps are a good option for immediate breast reconstruction after conservative surgery. Objective: The aim of this study was to describe the clinical results of an algorithm for using chest wall perforator flaps for breast reconstruction after breast-conserving surgery for breast cancer. Material and methods: We conducted a descriptive and retrospective study. The information was retrieved from the medical records of the patients diagnosed with breast cancer who underwent breast-conserving surgery and required reconstruction using chest wall perforator flaps between January 2020 and March 2022. The indications included volume deficit, contour defect and asymmetry. The vascular pedicle of the flap was evaluated by color Doppler ultrasound in all cases, which allowed us to follow an algorithm for selecting the best flap option. Results: Twenty flaps were made in 19 patients. Mean age: 52 years ± 11 (range 30-76). There were no intraoperative complications. One patient required reoperation due to a hematoma with compression of the vascular pedicle of the flap with partial flap loss, and another flap presented superficial epidermolysis. There were no cases of complete flap loss. All the patients underwent postoperative radiation therapy without loss of volume or retractions. Mean follow-up was 15 months. At 6 months, patients rated the results as excellent, good, and fair in 7, 11, and 2 cases, respectively. Conclusion: The selection of local perforator flaps to correct breast defects after conservative surgery, using preoperative color Doppler ultrasound to identify the vascular pedicle and a specific algorithm, allowed us to obtain satisfactory aesthetic results without the need for alloplastic elements or subsequent revisions.

Sobrevivência em fadiga de coroas bioinspiradas bilaminadas: estudo in vitro / Fatigue survival rate of bioinspired bilaminar crowns: in vitro study

O objetivo deste estudo foi avaliar o comportamento biomecânico através da resistência à fadiga e análise por elementos finitos de coroas bioinspiradas bilaminadas com infraestruturas modificadas na superfície vestibular (Estudo A) e utilizando diferentes materiais cerâmicos com módulos elásticos distintos (Estudo B). Para isso, foram confeccionados 90 preparos para coroa total em resina epóxi G10, sobre os quais foram preparadas coroas bioinspiradas de acordo com os seguintes grupos: Estudo A - IC (infraestrutura convencional), IME (infraestrutura modificada estratificada) e IMC (infraestrutura modificada cimentada), todas confeccionadas em dissilicato de lítio (infraestrutura) + porcelana (recobrimento); Estudo B ­ DL+LEU (dissilicato de lítio + leucita), LEU+DL (leucita + dissilicato de lítio), CH+DL (cerâmica híbrida + dissilicato de lítio) e CH+LEU (cerâmica híbrida + leucita). Para o Estudo A, todas as infraestruturas foram usinadas; os recobrimentos dos grupos IC e IME foram confeccionados através da estratificação, e os recobrimentos do grupo IMC foram usinados. Já para o Estudo B, todas as peças foram usinadas, de acordo com o material cerâmico de cada grupo. Em seguida, foi realizada a cimentação adesiva dos recobrimentos sobre as infraestruturas (a depender do grupo) e das coroas sobre os preparos utilizando cimento resinoso fotopolimerizável (Variolink Esthetic LC). Após a cimentação, os espécimes foram submetidos ao teste de fadiga cíclica (10.000 ciclos, 20Hz), e como desfecho foram considerados dois eventos, em que o primeiro foi a ocorrência de trinca e/ou lascamento (evento 1) e o segundo foi a falha catastrófica do conjunto (evento 2). Os valores de carga e número de ciclos para falha em que foram observados os eventos 1 e 2 foram utilizados para realizar a análise de sobrevivência de acordo com Kaplan-Meier e Log-Rank (Mantel-Cox; 95%). As marcas de fratura e o modo de falha das coroas foram avaliados e classificados por estereomicroscópio óptico e microscópio eletrônico de varredura. Por fim, foi realizada análise por elementos finitos (FEA) para ambos os estudos, a fim de avaliar a distribuição de tensões sobre as coroas e interface adesiva. Para o Estudo A, os resultados do teste de fadiga mostraram que, considerando o evento 1 (trinca/lascamento), os grupos IC e IMC apresentaram médias de carga fadiga estatisticamente significantes entre si (733,33 N e 913,33 N, respectivamente), enquanto o grupo IME apresentou média superior (1.020 N). O mesmo foi observado para o número de ciclos em fadiga para todos os grupos. Ao considerar o evento 2 (falha catastrófica), os três grupos apresentaram médias estatisticamente semelhantes entre si (~1.028 N). Os resultados de FEA mostraram que o grupo IC concentrou maior tensão de tração do que os grupos IME e IMC. Para o Estudo B, no teste de fadiga, o grupo DL+LEU apresentou a maior média de resistência à fadiga (evento 1: 913,33 N e evento 2: 1033,33 N), enquanto todas as outras combinações de materiais cerâmicos analisadas foram estatisticamente semelhantes entre si, considerando carga e número de ciclos. Com relação ao FEA, os grupos com cerâmica híbrida (CH+DL e CH+LEU) apresentaram menores picos de concentração de tensão na infraestrutura do que os grupos com cerâmicas vítreas (DL+LEU e LEU+DL), porém, em contrapartida, concentraram maior tensão na interface adesiva. Com isso, conclui-se que a utilização da infraestrutura modificada é uma alternativa viável e promissora para tratamentos reabilitadores, apresentando sobrevivência em fadiga e distribuição de tensões satisfatórias. Além disso, a combinação entre uma infraestrutura de dissilicato de lítio e recobrimento de cerâmica a base de leucita corresponde a melhor abordagem considerando a infraestrutura modificada.(AU)

The objective of this study was to evaluate the biomechanical behavior through fatigue resistance and finite element analysis of bilaminar bioinspired crowns with modified infrastructures on the buccal surface (Study A) and using different ceramic materials with different elastic moduli (Study B). For this, 90 preparations were made for a full crown in G10 epoxy resin, on which bioinspired crowns were prepared according to the following groups: Study A - CI (conventional infrastructure), SMI (stratified modified infrastructure) and CMI (cemented modified infrastructure ), all made of lithium disilicate (infrastructure) + porcelain (veneer); Study B ­ LD+LEU (lithium disilicate + leucite), LEU+LD (leucite + lithium disilicate), HC+LD (hybrid ceramic + lithium disilicate) and HC+LEU (hybrid ceramic + leucite). For Study A, all infrastructures were machined; the coverings of the CI and SMI groups were made through stratification technique, and the veneers of the SMI group were machined. For Study B, all pieces were machined, according to the ceramic material of each group. Then, the veneers were cemented into their infrastructures (depending on the group) and crowns were cemented into preparations using light-cured resin cement (Variolink Esthetic LC). After cementing, the specimens were subjected to the cyclic fatigue test (10,000 cycles, 20Hz), and as an outcome two events were considered: the occurrence of cracking and/or chipping (event 1) and catastrophic failure (event 2). The load (N) and number of cycles to failure in which events 1 and 2 were observed were used to perform the survival analysis according to Kaplan-Meier and Log-Rank (Mantel- Cox; 95%). The fracture marks and failure mode of the crowns were evaluated and classified by optical stereomicroscope and scanning electron microscope. Finally, finite element analysis (FEA) was performed for both studies in order to evaluate the stress distribution over the crowns and adhesive interface. For Study A, the results of the fatigue test showed that, considering event 1 (cracking/chipping), the CI and CMI groups presented average to failure that were statistically significant compared to each other (733.33 N and 913.33 N, respectively), while the SMI group showed higher averages (1,020 N). Same pattern was observed for the number of cycles under fatigue for both groups. When considering event 2 (catastrophic failure), the three groups presented statistically similar means (~1,028 N). The FEA results showed that the CI group concentrated greater tensile stress than the CMI and SMI groups. For Study B, in the fatigue test, the LC+LEU group presented the highest average fatigue resistance (event 1: 913.33 N and event 2: 1033.33 N), while all other combinations of ceramic materials analyzed were statistically similar to each other, considering load and number of cycles. Regarding FEA, the groups with hybrid ceramics (HC+LC and HC+LEU) showed lower stress concentration peaks in the infrastructure than the groups with glass ceramics (LC+LEU and LEU+LC), however, on the other hand, concentrated greater tension at the adhesive interface. With this, it is concluded that the use of modified infrastructure is a viable and promising alternative for oral rehabilitation treatments, presenting satisfactory fatigue survival and adequate stress distribution. Furthermore, the combination of a lithium disilicate infrastructure and a leucite-based ceramic coating corresponds to the best approach considering the modified infrastructure.(AU)

Reabilitação oral com próteses parciais removíveis após restabelecimento de dimensão vertical de oclusão e tratamento multidisciplinar: relato de caso / Oral rehabilitation with removable partial dentures after restoration of the vertical dimension of occlusion and multidisciplinary treatment: case report

As próteses parciais removíveis (PPRs) são uma alternativa de tratamento viável na prática clínica para reabilitar arcos parcialmente desdentados. Entretanto, o planejamento dessas próteses e preparo bucal prévio são frequentemente negligenciados. O presente artigo tem como objetivo relatar o caso clínico de uma reabilitação oral com PPRs superior e inferior após abordagem multidisciplinar, de modo a enfatizar as fases de um planejamento criterioso e de preparo prévio dos dentes pilares, visando o sucesso e a longevidade da reabilitação. Paciente do sexo masculino de 57 anos de idade compareceu à clínica da Faculdade de Odontologia de Bauru, Universidade de São Paulo, queixando-se da estética de seu sorriso e de algumas ausências dentárias. O indivíduo utilizava uma PPR provisória inferior insatisfatória e apresentava perda de dimensão vertical de oclusão (DVO). Após o exame clínico, radiográfico e estudo do caso em articulador semi-ajustável, realizou-se o planejamento com abordagens restauradoras, endodônticas, periodontais e protéticas. Após tratamento periodontal, foi realizada endodontia dos elementos 12, 15 e 47, confecção de núcleos e coroas nos dentes 12 e 15, restauração a nível gengival para apoio residual no dente 47, restaurações nos dentes 11, 13, 22, 24 e 44 e, por fim, a confecção das PPRs superior e inferior. A abordagem multidisciplinar utilizada neste caso clínico viabilizou o restabelecimento da DVO e possibilitou o sucesso da reabilitação protética(AU)

Removable partial dentures (RPDs) are a viable treatment alternative in clinical practice to rehabilitate partially edentulous arches. However, the planning of these dentures and prior oral preparation are often neglected. This article aims to report the clinical case of an oral rehabilitation with upper and lower RPDs after a multidisciplinary approach, to emphasize the phases of careful planning and prior preparation of the abutment teeth, aiming at the success and longevity of the rehabilitation. A 57-year-old male patient came to the clinic of the Bauru School of Dentistry, University of São Paulo, complaining about the esthetics of his smile and some missing teeth. The subject was using an unsatisfactory lower provisional prosthesis and had a loss of vertical dimension of occlusion (OVD). After the clinical and radiographic examination and the case study in a semi-adjustable articulator, planning was carried out with restorative, endodontic, periodontal and prosthetic approaches. After periodontal treatment, endodontics were performed on elements 12, 15 and 47, creation of cores and crowns on teeth 12 and 15, restoration at the gingival level for residual support on tooth 47, restorations on teeth 11, 13, 22, 24 and 44 and, finally, the making of the upper and lower PPRs. The multidisciplinary approach used in this clinical case enabled the restoration of the OVD and enabled the success of the oral rehabilitation(AU)

Evaluación preoperatoria de la hemostasia en cirugía mayor electiva / Preoperative evaluation of hemostasis in elective major surgery

Resumen: Introducción: Las pruebas de coagulación carecen de valor para determinar el riesgo de sangrado perioperatorio. Material y métodos: Se realizó un estudio observacional, descriptivo, y transversal en 2,114 pacientes en la consulta de Anestesiología del Hospital Universitario «Dr. Celestino Hernández Robau¼, los resultados se evaluaron mediante estadística descriptiva. Resultados: El tiempo de coagulación y sangrado se realizó en 100% de los casos y el conteo de plaquetas en 93.99%, mientras que el tiempo de protrombina y tiempo de tromboplastina parcial activado se efectuó en 66.27 y 55.62% de los casos respectivamente. De 8.834 exámenes realizados se encontraron 49 alterados en 0.55%. Los pacientes con exámenes alterados fueron 33 en 1.56%, los enfermos en riesgo de sangrado por exámenes de coagulación fueron 30 en 1.42% y los pacientes en riesgo sin antecedentes de sangrados detectados por exámenes de coagulación fueron tres en 0.14%. Se reportó sangrado perioperatorio en 16 pacientes en 0.76%, siete pacientes con interrogatorio positivo y exámenes normales y nueve pacientes con interrogatorio negativo y exámenes normales. Conclusiones: La historia clínica y el examen físico del paciente son las mejores herramientas para predecir el riesgo de sangrado quirúrgico y los exámenes aislados de coagulación no constituyen un buen predictor del sangrado perioperatorio.

Abstract: Introduction: Coagulation tests are no value to determine the risk of perioperative bleeding. Material and methods: An observational descriptive cross-sectional study was carried out in 2,114 patients in the anesthesiology consultation of the University Hospital «Dr. Celestino Hernández Robau¼. Results: The clotting and bleeding time was performed in 100% of cases, the platels count in 93.99%. While the prothrombin time and activated partial tromboplastin time were performed in 66.27 and 55.62% respectively. Of 8,834 tests carried out, 49 were found to be altered for 0.55%. Patients with altered tests were for 1.56%, patients at risk of bleeding from coagulation tests were 30 for 1.42% and patients at risk with no history of bleeding detected by coagulation tests were three for 0.14%. Perioperative bleeding was reported in 16 patients for 0.76%, seven patients with positive questioning and normal tests and nine patients with negative questioning and normal tests. Conclusions: The patient's medical history and physical examination are the best tools to predict the risk of surgical bleeding and isolated coagulation tests do not constitute a good predictor of perioperative bleeding.

Uso de prótesis parcial removible con resina acrílica termoplástica: una revisión de literatura

La prótesis parcial removible (PPR) es una alternativa de tratamiento en pacientes que perdieron algunos elementos dentarios, debido al costo relativamente bajo y a la generación de una función masticatoria satisfactoria. Además, es una buena opción cuando hay pérdida de los tejidos óseos, dado que impide la instalación de implantes dentarios. La PPR convencional presenta una estructura metálica que ofrece retención y resistencia a la prótesis, convirtiéndola en poco agradable a los pacientes, por el hecho de dejar a la vista el metal en la cavidad oral. A partir de investigadores que decidieron ir más allá del simple estudio de la función y la estética de las PPR para adentrase en sus diversas formas de presentación, surgió la prótesis parcial flexible (PFlex). La PFlex es una prótesis parcial confeccionada con resina termoplástica, sin metal y con flexibilidad. Si bien, muchos profesionales la emplean como prótesis temporal, otros tantos la han usado como alternativa a la PPR convencional. Así, uno de los frecuentes interrogantes de los clínicos es si realmente es posible utilizar la PFlex como alternativa protética definitiva. Por tanto, el propósito de este trabajo fue realizar una revisión de la literatura para evaluar si el uso de prótesis parciales removibles con resina termoplástica puede ser una alternativa a las prótesis parciales convencionales, exponiendo las ventajas, desventajas, indicaciones, contraindicaciones y las propiedades del material protético.

Removable partial denture (RPP) is an alternative treatment when it comes to patients who have lost some dental elements, as they have the advantages of a relatively low cost and a satisfactory masticatory function. Furthermore, it is a good option when there is bone tissue loss, making dental implants placement unfeasible. Conventional PPR has a metallic frame that provides retention and resistance to the prosthesis, which makes it unpalatable to patients because it leaves the metal in the oral cavity evident. Many researchers, aiming to give back beyond function and aesthetics, are studying forms of presentation of PPR, thus emerging the flexible partial prosthesis (PFlex). PFlex is a partial denture made with thermoplastic, resin metal-free and with flexibility, however its use, for many professionals, is limited only as temporary prostheses, but there are some clinicians who use PFlex as an alternative to conventional PPR. Thus, one of the questions constantly asked by scientists is whether it is possible to use PFlex as a definitive prosthetic alternative. Therefore, the aim of this study was to conduct a literature review to assess whether the use of removable partial dentures with thermoplastic resin can be an alternative to conventional partial dentures, exposing the advantages, disadvantages, indications, contraindications, and the properties of the prosthetic material.

Restricción parcial de flujo sanguíneo con resistencia, fundamento fisiológico y metodología de entrenamiento

El entrenamiento con restricción del flujo sanguíneo ha resultado ser una alternativa que logra resultados similares a los conseguidos por el entrenamiento de alta intensidad. El presente artículo ofrece el resultado de una investigación, en la que se realizó una revisión bibliográfica para indagar sobre la efectividad en el aumento de fuerza muscular, así como analizar los mecanismos de acción y metodología de aplicación práctica, mediante el método de restricción parcial de flujo sanguíneo con resistencia a bajas cargas. La literatura revisada respalda los efectos positivos de este método para generar hipertrofia y aumento de fuerza muscular, tanto en población sana como en periodo de rehabilitación. Los principales mecanismos propuestos como mediadores de esta adaptación son la elevación en la secreción de hormona del crecimiento, la señalización intracelular vía anabólica y catabólica y la contribución de procesos inflamatorios o edematosos. Se recomendó trabajar con cargas entre el 20 al 40 % de una repetición máxima y con un volumen de 75 repeticiones por sesión con entrenamiento entre 2 a 4 veces por semana, durante un tiempo mínimo de tres semanas. Se discutió sobre los efectos en la adaptación neurológica, sin existir evidencia que lo respalde. Se concluyó que el método de restricción parcial del flujo sanguíneo genera aumento de fuerza e hipertrofia y se recomienda como método complementario y alternativo al ejercicio de alta intensidad, en poblaciones que necesariamente se ven imposibilitadas de entrenar a altas intensidades.

SÍNTESE O treinamento com restrição do fluxo sanguíneo provou ser uma alternativa que alcança resultados similares aos alcançados pelo treinamento de alta intensidade. Este artigo oferece o resultado de uma pesquisa, na qual foi realizada uma revisão de literatura para investigar a eficácia no aumento da força muscular, bem como para analisar os mecanismos de ação e metodologia de aplicação prática, utilizando o método de restrição parcial do fluxo sanguíneo com resistência a cargas baixas. A literatura revisada apóia os efeitos positivos deste método para gerar hipertrofia e aumentar a força muscular, tanto na população saudável quanto no período de reabilitação. Os principais mecanismos propostos como mediadores desta adaptação são a elevada secreção hormonal de crescimento, a sinalização intracelular através de vias anabólicas e catabólicas e a contribuição de processos inflamatórios ou edematosos. Foi recomendado trabalhar com cargas entre 20 a 40% de uma repetição máxima e com um volume de 75 repetições por sessão com treinamento entre 2 a 4 vezes por semana, por um tempo mínimo de três semanas. Os efeitos sobre a adaptação neurológica foram discutidos, mas não há evidências que sustentem isto. Concluiu-se que o método de restrição parcial do fluxo sanguíneo gera maior força e hipertrofia e é recomendado como um método complementar e alternativo ao exercício de alta intensidade, em populações que são necessariamente incapazes de treinar em altas intensidades.

Blood flow restriction training has turned out to be an alternative that achieves results similar to those achieved by high intensity training. The present article offers the result of a research where, a bibliographical review was carried out to inquire about the effectiveness in increasing muscle strength, as well as to analyze the mechanisms of action and methodology of practical application, through the method of partial restriction of blood flow with endurance to low loads. The reviewed literature supports the positive effects of this method to generate hypertrophy and increase muscle strength, both in the healthy population and in the rehabilitation period. The main mechanisms proposed as mediators of this adaptation are increased secretion of growth hormone, intracellular signaling via anabolic and catabolic pathways, and the contribution of inflammatory or edematous processes. It was recommended to work with loads between 20 and 40 % of a maximum repetition and with a volume of 75 repetitions per session with training between 2 and 4 times a week, for a minimum of three weeks. The effects on neurological adaptation were discussed, without supporting evidence. It was concluded that the method of partial restriction of blood flow generates an increase in strength and hypertrophy and is recommended as a complementary and alternative method to high intensity exercise, in populations that are necessarily unable to train at high intensities.

Desarrollo y aplicación de un software educativo bidimensional para el proceso de enseñanza del diseño de Prótesis Parcial Removible / Validation of a two-dimensional educational software for the learning process of the design of Removable Partial Dentures

Objetivo: El objetivo de este estudio fue desarrollar e implementar un software educativo bidimensional para el proceso de aprendizaje del diseño de Prótesis Parciales Removibles.Materiales y métodos: Se utilizó el método científico y procedimientos de evaluación educativa para abordar las necesidades de la asignatura de Prótesis Parcial Removible en la Facultad de Odontología de la UNMSM de Perú en el año 2022. Se utilizó análisis, síntesis y encuestas. Se examinó la aplicabilidad del software y el cumplimiento de los requerimientos de enseñanza y aprendizaje, no sólo en la UNMSM sino en cualquier universidad con requerimientos y características similares. Resultados: La aplicación in-terna del software arrojó un valor final del 96%, mientras que la evaluación de alumnos y docentes mostró un 90% de aceptación, al considerar que el SEDUPPR es sencillo para instalar, sencillo en su manejo y funcionamiento, y es muy útil para aprender diseño de PPR. Conclusiones: El software educativo bidimensional diseñado para el proceso de aprendizaje de Prótesis Parcial Removible es aplicable y puede ser implementado en diferentes ámbitos educativos.

Objective: The objective of this study was to develop and implement a two-dimensional educational software for the learning process of designing Removable Partial Prostheses.Materials and Methods: The scientific method and educational evaluation procedures were utilized to address the needs of the Removable Partial Prosthesis subject in the Fa-culty of Dentistry at the UNMSM in Peru in 2022. Analysis, synthesis, and surveys were used. The software's applicability and fulfillment of teaching and learning requirements were examined, not only at the UNMSM but also in any university with similar require-ments and characteristics. Results: The internal application of the software yielded a final value of 96%, while the evaluation of students and teachers showed a 90% acceptance rate, considering that SEDUPPR is simple to install, easy to use and operate, and is very useful for learn PPR design. Conclusion: The two-dimensional educational software designed for the learning process of Removable Partial Prosthesis is applicable and can be implemented in different educational settings.

Cambios en parámetros masticatorios con prótesis parcial removible para dientes posteriores perdidos / Changes in masticatory parameters with removable partial dentures for missing posterior teeth

Introducción: el reemplazo de dientes perdidos aspira a mejorar la función masticatoria. Aunque hay diferentes opciones para ello, la conveniencia de la prótesis parcial removible (PPR) es su bajo costo. Objetivo: comparar el desempeño masticatorio (DM) después de 20 ciclos masticatorios y al umbral de la deglución (UD) en adultos de 50 a 70 años con dientes posteriores perdidos (DPP), con/sin PPR; y los ciclos hasta la deglución. Material y métodos: estudio transversal en 35 adultos con dientes anteriores y PPR bien ajustadas y utilizadas para comer. El lado de prueba fue el lado con más DPP. El DM se evaluó después de 20 ciclos y al UD utilizando un alimento prueba artificial (Optosil Comfort®) con/sin la PPR en orden aleatorizado. Las partículas se tamizaron para determinar el tamaño medio de partícula (TMP) como medida del DM. Los ciclos se contaron visualmente. Estadística descriptiva y comparaciones con SPSS-v23. Resultados: hubo diferencias significativas (p ≤ 0.05) al masticar con/sin PPR. El TMP fue más pequeño (mejor DM) con la PPR después de 20 ciclos y al UD (3.9 vs 4.4 mm y 3.2 vs 4.2 mm). Los ciclos para llegar al UD disminuyeron con la PPR (40 vs 47). Conclusión: a pesar de una mejora limitada de la función masticatoria, las PPR ayudan a preparar los alimentos en partículas más pequeñas antes de deglutirlas. La mejoría en DM con PPR es de 24% al UD, realizando menos ciclos antes de deglutir sus alimentos (AU)

Introduction: replacement of missing teeth should improve masticatory function. Although there are different options removable partial dentures (RPD) are used due to their lower cost. Objective: to compare masticatory performance (MP) after 20 chewing-cycles and swallowing-threshold (ST) in 50-70 year-old adults with missing posterior teeth (MPT) with and without their cast-metal RPD; chewing cycles until swallowing were also compared. Material and methods: 35 adults participated in this cross-sectional study. Subjects with anterior teeth and welladjusted RPDs, used for eating were included. The side with more MPT was selected as the test side. MP was evaluated after 20 cycles and ST using an artificial test-food (Optosil Comfort®) with/without the RPD (subject-own-control) (randomized order). Chewed particles were sieved to determine medium-particle-size (MPS) as a measure of MP. Chewing cycles were visually counted. Descriptive statistics and comparisons were run with SPSS v23. Results: there were significant differences (p ≤ 0.05) for all parameters when chewing with/without the RPD. MPS was smaller (better MP) with the RPD (3.9 vs 4.4 mm and 3.2 vs 4.2 mm) after 20 cycles and ST respectively. Cycles required to reach ST were less when chewing with the denture (40 vs 47). Conclusion: despite a limited improvement of masticatory function RPDs help patients prepare their food into smaller particles before swallowing. Improvement in MP with RPDs for patients with MPT is 24% at ST and they perform fewer chewing cycles before swallowing food (AU)

The importance of properly distributing the occlusal load for the correct biomechanics of implant-supported fixed partial dentures: stress analysis in implants, prosthetic components and infrastructures / A importância da distribuição da carga oclusal de forma adequada para a correta biomecânica de prótese parcial fixa implantosuportada: análise das tensões em implantes, componentes protéticos e infraestruturas

ABSTRACT Objective: The present study analyzed the biomechanical behavior of the generated stress on the external surface of the rehabilitation elements (implants, components and infrastructures) according to different occlusion patterns on a fixed partial denture on osseointegrated implants. Method: The experimental groups varied according to the location of the occlusal load applied to the Fixed partial denture, with a total occlusal load of 750N in all groups, opting for greater loads on the occlusal table of the molar in relation to the premolar. This evaluation was performed by the finite element method with simulations by the AnsysWorkbench 16.0 Software program. Results: The results analyzed for implants and their components showed that the more posterior the occlusal loading, the greater the stress developed (group 4), always in the connection area between the prosthetic component and the implant, as this location can induce greater screw loosening. The results analyzed for the infrastructures showed that the most distributed occlusal loading possible (group 1) is the best situation for generating less stress. However, even in group 3 which obtained the highest stresses in the critical area of the prosthetic connection, the zirconia flexural strength values generated were not worrisome. Conclusion: It can be concluded that the occlusal adjustment of Fixed partial dentures are preponderant and decisive factors for correct biomechanics and preservation of the system in the long term in order to avoid possible damage and/or failures, and exert significant and notorious differences in the behavior of all structures studied herein.

RESUMO Objetivo: O presente estudo analisou o comportamento biomecânico do estresse gerado na superfície externa dos elementos reabilitadores (implantes, componentes e infraestruturas) de acordo com diferentes padrões de oclusão em uma prótese parcial fixa sobre implantes osseointegrados. Métodos: Os grupos experimentais variaram de acordo com a localização da carga oclusal aplicada na Prótese Parcial Fixa, com carga oclusal total de 750N em todos os grupos, optando por cargas maiores na mesa oclusal do molar em relação ao pré-molar. Esta avaliação foi realizada pelo método dos elementos finitos com simulações pelo programa AnsysWorkbench 16.0 Software. Resultados: Os resultados analisados para os implantes e seus componentes mostraram que quanto mais posterior a carga oclusal, maior a tensão desenvolvida (grupo 4), sempre na área de conexão entre o componente protético e o implante, pois este local pode induzir maior soltura do parafuso. Os resultados analisados para as infraestruturas mostraram que a carga oclusal mais distribuída possível (grupo 1) é a melhor situação para gerar menos estresse. No entanto, mesmo no grupo 3 que obteve as maiores tensões na área crítica da conexão protética, os valores de resistência à flexão da zircônia gerados não foram preocupantes. Conclusões: Pode-se concluir que o ajuste oclusal das Próteses Parciais Fixas são fatores preponderantes e decisivos para correta biomecânica e preservação do sistema a longo prazo a fim de evitar possíveis danos e/ou falhas, e exercem diferenças significativas e notórias no comportamento de todas as estruturas aqui estudadas.

The effect of different framework's material on strain induced in distal abutment in mandibular Kennedy's class II: an in-vitro study / O efeito de diferentes materiais de estrutura na deformação induzida na distal do pilar da classe II de Kennedy mandibular: um estudo in vitro

Objective: This study aims to compare the strain induced in the supporting structures of unilateral mandibular removable partial denture frameworks retained by extra-coronal attachments fabricated with three different materials. Material and Methods: Three mandibular class II digitally designed and printed acrylic models with detachable abutments were used to fabricate three removable partial denture framework with extra coronal attachments from three different materials. A total of 33 models were prepared for strain testing (n=11). Models were divided into three groups according to framework's material: porcelain fused to cobalt chromium (PFM), polyetherketoneketone (PEKK) and polyetheretherketone (PEEK) group. Unilateral load of 60 N was applied in the three groups and strains were measured around the main abutment and saddle area using strain gauge. Results: Statistical analysis was performed using Shapiro-Wilk's test and by checking data distribution. Data were found to be non-parametric and were analysed using Kruskal-Wallis test followed by Dunn's post hoc test with Bonferroni correction. PFM group showed significantly the highest strain values around abutment, slot 1 (1mm distal to the socket of the last abutment) and slot 2 (1 cm away from slot 1) respectively (843.00±23.08, 91.00±6.52 and 1274.00±65.71) than the other tested groups (p<0.05) at same tested sites respectively followed by PEKK group (384.00±37.48, 81.00±2.24 and 135.00±0.00) and PEEK group (29.00±4.18, 63.00±4.47 and 52.00±5.70). Conclusions: PEEK and PEKK for partial denture framework with extra coronal attachments are adequate alternative to PFM due to their good mechanical response applying less strain on supportive structures in free-end cases. PEEK induces lower strain magnitude on the supporting structures when compared to PEKK. (AU)

Objetivo: Este estudo tem como objetivo comparar a tensão induzida nas estruturas de suporte de estruturas de próteses parciais removíveis mandibulares unilateraisretidas por encaixes extracoronários fabricados com três materiais diferentes. Material e Métodos: Três modelos mandibulares de classe II digitalmente projetados e impressos em acrílico com pilares destacáveis foram usados para fabricar três estruturas de próteses parciais removíveis com encaixes extracoronários de três materiais diferentes. Um total de 33 modelos foram preparados para testes de deformação (n=11). Os modelos foram divididos em três grupos de acordo com o material da estrutura: porcelana fundida com cobalto-cromo (PFM), poliétercetonacetona (PEKK) e polieteretercetona (PEEK). Carga unilateral de 60 N foi aplicada nos três grupos e as deformações foram medidas em torno do pilar principal e área de sela usando medido de tensão. Resultados: A análise estatística foi realizada por meio do teste de Shapiro-Wilk e com a verificação da distribuição dos dados. Os dados mostraram-se não paramétricos e foram analisados pelo teste de Kruskal-Wallis seguido pelo de Dunn com correção de Bonferroni. O grupo PFM mostrou significativamente os maiores valores de tensão ao redor do pilar, slot 1 (1mm distal do último pilar) e slot 2 (1 cm de distância do slot 1) respectivamente (843,00±23,08, 91,00±6,52 e 1274,00±65,71) do que os outros grupos testados (p<0,05) nos mesmos locais testados, respectivamente, seguido pelo grupo PEKK (384,00±37,48, 81,00±2,24 e 135,00±0,00) e grupo PEEK (29,00±4,18, 63,00±4,47 e 52,00±5,70). Conclusão: PEEK e PEKK para estrutura de prótese parcial com encaixes extracoronários são alternativas adequadas ao PFM devido à sua boa resposta mecânica aplicando menos tensão nas estruturas de suporte em casos de extremidade livre. O PEEK induz menor magnitude de deformação nas estruturas de suporte quando comparado ao PEKK (AU)

Estudio correlacional de complicaciones técnicas, biológicas, estéticas y nivel de satisfacción en tratamientos realizados en la Cátedra de Prótesis de Coronas y Puentes II de la Facultad de Odontología de la Universidad Nacional de Asunción

El objetivofue determinar la asociación correlacional que pudiera presentarse entre las complicaciones técnicas, biológicas y estéticas y el nivel de satisfacción de los tratamientos realizados en la Cátedra de Prótesis de Coronas y Puentes II de la Facultad de Odontología de la UNA en el 2019. Este fue un estudio observacional descriptivo, analítico, de corte transverso. Se incluyeron pacientes que recibieron tratamientos del 2016 al 2018. Acudieron 59 pacientes para la evaluación clínica y aplicación del cuestionario. Se analizaron los datos según número de tratamientos encontrados en cada sujeto, por lo que se calcularon los resultados según 119 tratamientos. Las complicaciones biológicas pulpares fueron la sensibilidad o molestia al frio o al calor en los pilares en un 20.1%. Se encontró asociación muy significativa de las complicaciones biológicas pulpares (p>001) con estado civil, complicaciones biológicas periodontales, complicaciones estéticas cervicales. Las complicaciones biológicas periodontales fueron en mayor frecuencia la gingivitis alrededor de la restauración en un 40,4%. El nivel de satisfacción con el tratamiento recibido se presentó favorable en un 89,1% y asociación muy significativa (p>001) con grado de instrucción y significativa (p>005) con estado civil.Se encontró asociación muy significativa de las complicaciones estéticas cervicales, las complicaciones estéticas de forma y significativa de las complicaciones biológicas periodontales con el nivel de satisfacción.

The objective was to determine the correlational association that could occur between technical, biological and esthetic complications and level of satisfaction in the treatments performed in the Department of Crown and Bridge Prosthodontics II of the Faculty of Dentistry of the National University of Asuncion in 2019. This was a descriptive, analytical, cross-sectional, observational study. Patients who received treatments from 2016 to 2018 were included. Fifty-nine patients attended for clinical evaluation and application of the questionnaire. The data were analyzed according to the number of treatments found in each subject, by which the results were calculated according to 119 treatments. Pulpal biological complications were sensitivity or discomfort to cold or heat in 20.1% of the abutments. A highly significant association was found between pulpal biological complications (p>001) and marital status, periodontal biological complications and cervical esthetic complications. The most frequent periodontal biological complications were gingivitis around the restoration (40.4%). The level of satisfaction with the treatment received was favorable in 89.1% and there was a very significant association (p>001) with educational level and significant (p>005) with marital status. A highly significant association was found between cervical esthetic complications, esthetic complications of shape and periodontal biological complications and the level of satisfaction.

Hemofilia adquirida A en embarazo. Caso clínico de medicina crítica en obstetricia por morbilidad extrema y su abordaje transdisciplinario perioperatorio / Acquired hemophilia A in pregnancy. Clinical case of critical medicine in obstetrics due to extreme morbidity and its perioperative transdisciplinary approach

Resumen: La identificación de múltiples factores de riesgo que predisponen a la hemorragia durante el evento obstétrico, como la hemofilia adquirida que es un trastorno que se desarrolla por la generación de autoanticuerpos inhibidores de factores de la coagulación, la interpretación objetiva de las pruebas de laboratorio rutinarias, el desarrollo de un pensamiento sistematizado en la integración diagnóstico-terapéutica por parte del personal de salud, y la disposición de los recursos farmacológicos hospitalarios, es lo que determina frecuentemente el pronóstico en pacientes obstétricas con morbilidad extrema que requieren atención multidisciplinaria en las diferentes unidades hospitalarias del sector salud de nuestro país. El objetivo es presentar un caso clínico de morbilidad extrema por hemofilia adquirida, su presentación clínica, evolución y desenlace fatal. Se presenta un caso referido de otra unidad del Sector Salud ISEM (Instituto de Salud del Estado de México), atendido en la Unidad de Cuidados Intensivos Obstétricos del Hospital «Mónica Pretelini Sáenz¼, resaltando la importancia en la integración diagnóstico-terapéutica y la interacción multifactorial de variables relacionadas con su desenlace fatal. Conclusiones: Desconocimiento de la patología, retraso en el diagnóstico, múltiples procedimientos condicionantes de hemorragia iatrógena y la limitación en recursos terapéuticos son factores que contribuyen a un desenlace fatal.

Abstract: The identification of multiple risk factors that predispose to bleeding during the obstetric event, such as acquired hemophilia, which is a disorder that develops due to the generation of autoantibodies that inhibit coagulation factors, the objective interpretation of routine laboratory tests , the development of systematized thinking in diagnostic-therapeutic integration by health personnel, and the provision of hospital pharmacological resources, is what frequently determines the prognosis in obstetric patients with extreme morbidity who require multidisciplinary care in the different hospital units of the health sector of our country. The objective is to present a clinical case of extreme morbidity due to acquired hemophilia, its clinical presentation, evolution and fatal outcome. A case referred from another unit of the ISEM (Instituto de Salud del Estado de México) Health Sector, treated at the Obstetric Intensive Care Unit of the «Mónica Pretelini Sáenz¼ Hospital, is presented, highlighting the importance of diagnostic-therapeutic integration, and the multifactorial interaction of variables related to its fatal outcome. Conclusions: Ignorance of the pathology, delay in diagnosis, multiple conditioning procedures of iatrogenic hemorrhage and the limitation in therapeutic resources are factors that contribute to a fatal outcome.

The mediating role of work-family conflict in the relationship between organizational justice and work-related stress / Rol mediador del conflicto trabajo-familia en la relación entre justicia organizacional y estrés laboral

Abstract Although the effects of overall organizational justice on perceptions of work-related stress have been demonstrated in previous studies, the mechanisms underlying this relationship are not explicit. Current research suggests that supervisors who are perceived as fair enhance employees' ability to balance their work and family roles, positively impacting their stress levels. The aim of this research is to examine the mediating role of work-family conflict in the relationship between perceptions of overall organizational justice and work-related stress in a Latin-American work context; also analyze gender differences in work-family/work-family conflict. 129 workers belonging to a Chilean public institution participated and answered a self-report questionnaire. Analyses were done using bivariate correlations of Pearson, Tau-b of Kendall, Student t-test and structural equation modeling. The results showed the existence of a significant negative correlation between perceptions of overall organizational justice and work-related stress. Furthermore, this relationship was partially mediated by work-family conflict, which means, perceptions of organizational justice were directly and indirectly associated with work-related stress, through work-family conflict. With respect to the gender variable and the work-family, no significant differences were found. This study contributes empirical evidence regarding the importance of perceptions of overall organizational justice and the work-family conflict on work-related stress, and the results obtained guide the diagnosis and the design of more specific models of prevention and intervention from the perspective of occupational health psychology.

Resumen Si bien los efectos de las percepciones de justicia organizacional global sobre las percepciones de estrés laboral han sido demostrados en estudios previos, los mecanismos que subyacen a esta relación no resultan explícitos. La investigación actual plantea que las jefaturas percibidas como más justas potencian la capacidad del trabajador para conciliar sus roles laborales y familiares, impactando positivamente sus niveles de estrés. El objetivo de este estudio es analizar, en un contexto laboral latinoamericano, el rol mediador del conflicto trabajo-familia en la relación entre las percepciones de justicia organizacional global y estrés laboral; y analizar diferencias entre hombres y mujeres respecto al conflicto trabajo-familia. Participaron 129 trabajadores pertenecientes a una institución pública chilena, quienes contestaron un cuestionario de autoreporte. Se efectuaron correlaciones bivariadas de Pearson, Tau-b de Kendall, prueba t de Student y modelamiento de ecuaciones estructurales. Los resultados mostraron la existencia de una correlación negativa y significativa entre las percepciones de justicia organizacional global y el estrés laboral. Además, esta relación estuvo mediada parcialmente por el conflicto trabajo-familia, es decir, las percepciones de justicia organizacional se asociaron de manera directa e indirecta al estrés laboral, a través del conflicto trabajo-familia. Respecto de la variable género y el conflict trabajo-familia, no se encontraron diferencias significativas. Este estudio aporta evidencia empírica sobre la importancia de las percepciones de justicia organizacional global, y sus resultados orientan el diagnóstico y la elaboración de modelos de prevención e intervención más específicos desde el campo de la psicología de la salud ocupacional.

Reabilitação oral utilizando prótese parcial removível associada a implantes osseointegrados: relato de caso / Oral rehabilitation using removable partial prosthesis associated with osseointegrated implants: case report

Introdução: As próteses parciais removíveis são alternativas amplamente utilizadas na reabilitação oral de pacientes parcialmente desdentados. Na atualidade os implantes dentais têm sido indicados para tratamento de pacientes edêntulos em associação com próteses parciais removíveis convencionais. Objetivo: Relatar um caso clínico utilizando uma prótese parcial removível convencional associada a implantes osseointegrados em paciente portador de Classe I de Kennedy. Relato de Caso: Paciente N.A.A.S., sexo feminino, 65 anos, procurou atendimento clínico no Instituto de Estudos da Saúde (IES) para reabilitação protética das arcadas dentais superior e inferior. A sua queixa principal era "dificuldade de mastigação". A paciente apresentava prótese total removível insatisfatória na maxila e não utilizava nenhum tipo de prótese dentária na mandíbula, que se apresentava parcialmente edêntula. O tratamento realizado foi a confecção de uma prótese total na arcada superior. Na arcada inferior foram inseridos dois implantes de hexágono externo nas regiões correspondentes às áreas dos dentes 34 e 44, após quatro meses a prótese parcial removível convencional foi confeccionada e incorporada aos implantes osseointegrados utilizando o sistema de retenção do tipo attachments Equator. Conclusão: Os resultados revelaram que a técnica de associação da prótese parcial removível convencional aos implantes osseointegrados demonstrou ser uma opção viável de tratamento com capacidade de devolver a função, a estética e manter a integridade dos dentes e tecidos periodontais(AU)

Introduction: Removable partial dentures are alternatives widely used in the oral rehabilitation of partially edentulous patients. Currently, dental implants have been indicated for the treatment of edentulous patients in association with conventional removable partial dentures. Objective: To report a clinical case using a conventional removable partial denture associated with osseointegrated implants in a patient with Kennedy Class I. Case Report: Patient N.A.A.S., female, 65 years old, sought clinical care at the Institute of Health Studies (HEI) for prosthetic rehabilitation of the upper and lower dental arches. His main complaint was "chewing difficulty". The patient had unsatisfactory removable total prosthesis in the maxilla and did not use any type of dental prosthesis in the mandible, which was partially edentulous. The treatment performed was the manufacture of a total prosthesis in the upper arch. In the lower arch, two external hexagon implants were inserted in the regions corresponding to the tooth areas 34 and 44, after four months the conventional removable partial denture was made and incorporated into the osseointegrated implants using the equator attachments retention system. Conclusion: The results revealed that the technique of associating conventional removable partial dentures with osseointegrated implants proved to be a viable treatment option with the ability to restore function, aesthetics and maintain the integrity of teeth and periodontal tissues(AU)

Manifestaciones clínicas de la deficiencia de factor XII en un lactante

RESUMEN Introducción: El factor XII o factor de Hageman pertenece al sistema de contacto al ser iniciador de la vía intrínseca de la coagulación. Concentraciones bajas de este factor se asocian a tiempo de tromboplastina parcial activado prolongado, sin embargo, no se producen manifestaciones hemorrágicas como ocurre en la deficiencia de otros factores. Objetivo: Describir las manifestaciones clínicas de un lactante con diagnóstico de deficiencia de factor XII de la coagulación. Presentación del caso: Se presenta un lactante de 10 meses que tuvo aparición espontánea de equimosis y se diagnosticó un déficit de factor XII. Conclusiones: Aunque no es común, la deficiencia del factor XII puede estar asociada a manifestaciones hemorrágicas como equimosis tal como se describe en el presente caso.

ABSTRACT Introduction: Factor XII or Hageman factor belongs to the contact system as it is the initiator of the intrinsic coagulation pathway. Low concentrations of this factor are associated with prolonged activated partial thromboplastin time, however, hemorrhagic manifestations do not occur as occurs in the deficiency of other factors. Objective: Describe the clinical manifestations of an infant diagnosed with coagulation factor XII deficiency. Case presentation: A 10-month-old infant who had spontaneous onset of ecchymosis and a factor XII deficiency was diagnosed. Conclusions: Although not common, factor XII deficiency may be associated with hemorrhagic manifestations such as ecchymosis, as described in the present case.

Infecciones urinarias y su relación con catéter vesical en pacientes ingresados

RESUMEN Introducción: las infecciones urinarias intrahospitalarias son una problemática desde las perspectivas clínica, epidemiológica y terapéutica. El 70 % se presentan en pacientes cateterizados, y generan un importante impacto sobre la morbimortalidad, y costos asociados al proceso de atención. Objetivo: determinar los microorganismos que incidieron en la infección urinaria de los pacientes ingresados y relacionar la misma con catéter vesical. Materiales y métodos: se realizó un estudio observacional, descriptivo y retrospectivo. Los casos correspondieron a 171 muestras de orina que se recibieron en el laboratorio de Microbiología del Hospital Clínico Quirúrgico Interprovincial Ambrosio Grillo, de Santiago de Cuba, entre enero y septiembre de 2019, obtenidas de los pacientes cateterizados ingresados en dicho centro asistencial, con diagnóstico de infección urinaria. Resultados: predominaron los pacientes del sexo femenino con más de 65 años de edad. El patógeno más aislado en los cultivos de orina fue Escherichia coli; el parcial de orina tuvo un ligero aumento en la sensibilidad; con relación a los urocultivos de los pacientes con infección urinaria, hubo un 34,5 % de estos con catéter vesical por más de siete días. Conclusiones: la utilización de dispositivos invasivos es un factor de riesgo significativo en el desarrollo de infección urinaria intrahospitalaria.

ABSTRACT Introduction: intra-hospital urinary infections are a problem from the clinical, epidemiological and therapeutic perspectives. 70 % are present in catheterized patients, and generate an important impact on morbidity and mortality, and on the costs associated with the care process. Objective: to determine the microorganisms that impacted on the urinary infection of the hospitalized patients and to relate it to vesical catheter. Materials and methods: an observational, descriptive and retrospective study was carried out. The cases corresponded to 171 urine samples that were received at the Microbiology laboratory of the Interprovincial Clinical Surgical Hospital Ambrosio Grillo, of Santiago de Cuba, between January and September 2019, obtained from catheterized patients admitted to that care facility with diagnosis of urinary infection. Results: female patients over 65 years old predominated. The most isolated pathogen in urine cultures was Escherichia coli; urine partial had a slight increase in sensitivity; in relation to urocultures of patients with urinary infection, 34.5 % of them had vesical catheter for more than seven days. Conclusions: the use of invasive devices is a significant risk factor in the development of intra-hospital urine infection.

Restabelecimento da Dimensão Vertical de Oclusão com JIG estético modificado e Prótese Parcial Removível Overlay: relato de caso / Reestablishment of occlusal vertical dimension with a modified aesthetic JIG and an overlay removable partial denture: a case report

A reabilitação de pacientes parcialmente edêntulos com desgaste dentário severo e dimensão vertical de oclusão reduzida é desafiadora e complexa. Objetivo: Descrever o restabelecimento da dimensão vertical de oclusão e parâmetros estéticos com uma prótese parcial removível do tipo overlay (PPRO) com auxílio de um JIG estético modificado. Relato de caso: Paciente do sexo masculino, 58 anos de idade, procurou serviço odontológico queixando-se de insatisfação com a estética do sorriso e perda dos dentes posteriores. Ao exame clínico, foram observados desgaste dentário excessivo e edentulismo parcial nas arcadas superior e inferior. Então, foi proposto tratamento em 2 etapas (provisória e definitiva) com PPRO em maxila. O JIG estético foi usado como guia de referência para incrementos em resina composta fotopolimerizável e o restabelecimento da dimensão vertical de oclusão foi determinado a partir de métodos métrico, fonético e estético. Os dentes desgastados foram aumentados e os dentes ausentes substituídos por dentes artificiais a partir de uma PPRO provisória. Após 2 meses de adaptação, a reabilitação final com PPRO definitiva foi conduzida baseando-se na reabilitação com a PPRO provisória. Conclusão: O paciente relatou satisfação com a estética e desempenho funcional com o tratamento. Portanto, o JIG estético beneficia o planejamento e o tratamento para restabelecer a dimensão vertical de oclusão. Além disso, a PPRO é uma alternativa reversível, de baixo custo, para reabilitar a estética e a função de pacientes com desgaste severo e perda parcial dos dentes.

The rehabilitation of partially edentulous patients with severe tooth wear and reduced occlusal vertical dimension is challenging and complex. Objective: To describe the reestablishment of occlusal vertical dimension and aesthetic parameters with an overlay re-movable partial denture (ORPD) with the aid of a modified aesthetic JIG. Case report: A 58-year-old man sought dental service complaining of dissatisfaction with the aesthetics of his smile and a loss of posterior teeth. At clinical examination, excessive tooth wear and partially edentulism in the lower and upper arches were observed. A two-step treatment (interim and definitive) with an ORPD in the upper arch was proposed. The aesthetic JIG was used as a reference guide for the increments in light-curing resin composite, and the reestablishmentthe occlusal vertical dimension was determined using aesthetic, phonetic, and metric methods. The worn teeth were increased, and the missing natural teeth were replaced by artificial teeth using a temporary ORPD. After two months of adaptation, de-finitive rehabilitation with a definitive ORPD was performed based on the interim ORPD. Conclusion: The patient reported satisfaction with the esthetic and functional performance of this treatment. Therefore, the aesthetic JIG benefits the planning and treatment of reduced vertical dimension. Moreover, the ORPD is a reversible and lower-cost alternative to rehabilitate the aesthetics and function of patients with severe teeth wear and partial teeth loss.

Normas Internacionales para la Clasificación Neurológica de las Lesiones de la Médula Espinal: la clasificación ASIA 2019 / International Standards for the Neurological Classification of Spinal CordInjuries the 2019 ASIA classification

Las normas internacionales para la clasificación neurológica de las lesiones de la médula espinal (ISNCSCI, por sus siglas en inglés), surgen de la necesidad de establecer un lenguaje común en la evaluación inicial y el seguimiento del paciente con lesión medular espinal (LME). La versión 2019 incorpora nuevos conceptos acerca de las deficiencias no relacionadas con la lesión de la médula espinal y de las zonas de preservación parcial en lesiones medulares incompletas. Esta clasificación permite estandarizar el examen físico, lo cual aumenta la reproducibilidad entre diferentes examinadores y el seguimiento a largo plazo. Además, facilita establecer el tratamiento y el pronóstico

The International Standards for Neurological Classification of Spinal Cord Injury (ISNCSCI) arose from the need to establish a common language in the initial evaluation and follow-up of the patient with spinal cord injury (SCI). The 2019 version incorporates new concepts about non-spinal cord injury-related impairments and areas of partial preservation in incomplete SCI. This classification allows standardization of the physical examination, which increases reproducibility between different examiners and long-term follow-up. It also facilitates the establishment of treatment and prognosis.

Extensor mechanism transplantation after knee prosthesis: 70-month follow-up / Transplante de mecanismo extensor após prótese de joelho: seguimento 70 meses

ABSTRACT Objective: This article reports the range of motion, failure rate, and complications of patients with extensor mechanism injury after total knee arthroplasty (TKA) treated with extensor mechanism allograft with mid-term follow-up. Methods: Patients undergoing post-ATJ extensor mechanism transplantation from 2009 to 2018 were retrospectively evaluated. Demographics, the reason for transplantation, elapsed time from arthroplasty to transplantation, related surgical factors, immobilization time, range of motion, transplant failure, and complications were collected. The minimum follow-up was 24 months. Results: Twenty patients were evaluated. The mean follow-up was 70.8 +/- 33.6 months. The most common cause of extensor mechanism rupture was traumatic in 10 (50%) cases. Six patients underwent associated surgeries, one case of medial ligament complex reconstruction, and 5 cases of TKA revision. Eleven patients (55%) had transplant-related complications. The most common complication was an infection. Five cases presented transplant failure. Conclusion: Patients who underwent extensor mechanism allograft transplantation after total knee arthroplasty had a 25% failure rate with a mean follow-up of 6 years. Although there was no loss of flexion with the procedure and prolonged immobilization, the complication rate was not low. Level of evidence IV; case series .

RESUMO Objetivo: O objetivo do estudo foi relatar amplitude de movimento, taxa de falha e complicações de pacientes com lesão do mecanismo extensor após artroplastia total do joelho (ATJ) tratados com aloenxerto do mecanismo extensor com acompanhamento no médio prazo. Métodos: Pacientes submetidos a transplante de mecanismo extensor pós-ATJ de 2009 a 2018 foram avaliados retrospectivamente. Foram avaliados dados demográficos, motivo do transplante, tempo decorrido da artroplastia ao transplante, fatores cirúrgicos relacionados, tempo de imobilização, arco de movimento, falha do transplante e complicações. O acompanhamento mínimo foi de 24 meses. Resultados: Vinte pacientes foram avaliados. O tempo médio de acompanhamento foi de 70,8 +/- 33,6 meses. A causa mais comum de ruptura do mecanismo extensor foi traumática em 10 (50%) casos. Seis pacientes foram submetidos a cirurgias associadas, um caso de reconstrução do complexo ligamentar medial e 5 casos de revisão de ATJ. Onze pacientes (55%) tiveram complicações relacionadas ao transplante. A complicação mais comum foi a infecção. Cinco casos apresentaram falha do transplante. Conclusão: Pacientes submetidos a transplante de aloenxerto de mecanismo extensor após artroplastia total de joelho apresentam taxa de falha de 25% com seguimento médio de 6 anos. Embora não tenha havido perda de flexão com o procedimento e com a imobilização prolongada, o índice de complicações não foi baixo. Nível de evidênvia IV; série de casos .

Consensos referidos a conceptos rehabilitadores en la enseñanza de la odontología. Parte I: conceptos generales y diseño de la prótesis parcial removible / Consensus referring rehabilitative concepts in the teaching of dentistry. Part I: general concepts and design of removable partial prosthesis

En este artículo se desarrolla el consenso alcanzado entre profesores, referido a los conceptos generales, componentes y la secuencia del diseño de la prótesis parcial removible, durante la formación del odontó-logo en el ámbito de la Facultad de Odontología de la Universidad de Buenos Aires (AU)

This article develops the consensus between professors on the general concepts, components, and the sequence of the design of the partial removable prosthesis during the training of the dentist in the field of the Faculty of Dentistry of the University of Buenos Aires (AU)