ABSTRACT
Objective To determinate the contents of α-pinene, β-pinene, eucalyptol and linalool in Baeckea frutescens by reference substances method and reference extract method respectively; To explore the feasibility of replacing single component reference by control extracts in assay. Methods The GC system consisted of a quartz column DB-5 (60 m×0.25 mm×0.25 μm); The temperature programming rose from 80 ℃ (15 min) to 90 ℃ by 1 ℃/min, lasting 2 min, then 10 ℃/min to 110 ℃, then 25 ℃/min to 240 ℃, lasting 8 min in the end; The temperature of the entrance of capillary vessel column was 250 ℃, and the temperature of the detector was 250 ℃. Results α-pinene, β-pinene, eucalyptol and linalool were in a good linear relationship within each concentration scope (r≥0.999). The average recovery rates were in the range of 96.5%–102.2%. The results of t-test demonstrated that there is no significant difference between the two methods. Conclusion The reference extract method can be used as a quality evaluation pattern for Baeckea frutescens.
ABSTRACT
OBJECTIVE:To establish a method for the contents determination of 4 ingredients in Ligustrum lucidum decoration piece by reference extract method. METHODS:HPLC was performed on the column of XBridge C18 with mobile phase of acetoni-trile-0.1% formic acid(gradient elution) at flow rate of 1.0 ml/min,detection wavelength was 254 nm,column temperature was 30℃and volume injection was 10μl. RESULTS:The linear range was 0.037-0.598 mg for neonuezhenide,0.006-0.101 mg for ac-teoside,0.189-3.023 mg for nuezhenide and 0.314-5.027 mg for specnuezhenide(r≥0.999 0);RSDs of precision,reproducibility and stability tests were no more than 3.8%;recoveries were 98.46%-104.83%(RSD=2.43,n=6),95.55%-104.57%(RSD=3.63, n=6),100.09%-104.39%(RSD=1.45,n=6)and 98.84%-104.97%(RSD=2.02,n=6). CONCLUSIONS:The method is simple, good reproducibility,and can be used for the contents determination of 4 ingredients in L. lucidum decoration piece.