ABSTRACT
Objective:To investigate the safety and feasibility of the CHESS endoscpic ruler (CHESS ruler), and the consistency between the measured values and the interpretation values by endoscopic physician experience.Methods:From January 2021 to January 2022, a total of 105 liver cirrhosis patients with portal hypertension were prospectively enrolled from General Hospital, Xixia Branch Hospital, Ningnan Hospital of People′s Hospital of Ningxia Hui Autonomous Region (29 cases), and the First People′s Hospital of Yinchuan (25 cases), General Hospital of Ningxia Medical University (18 cases), Wuzhong People′s Hospital (10 cases), the Fifth People′s Hospital of Ningxia Hui Autonomous Region (10 cases), Shizuishan Second People′s Hospital (6 cases), Yinchuan Second People′s Hospital (5 cases), and Zhongwei People′s Hospital (2 cases) 8 hospitals. The clinical characteristics of all the patients, including gender, age, nationality, etiolog of liver cirrhosis, and Child-Pugh classification of liver function were recorded. A big gastroesophageal varices was defined as diameter of varices ≥5 mm. Endoscopist (associated chief physician) performed gastroscopy according to the routine gastroscopy procedures, and the diameter of the biggest esophageal varices was measured by experience and images were collected, and then objective measurement was with the CHESS ruler and images were collected. The diameter of esophageal varices of 10 randomly selected patients (random number table method) was determined by 6 endoscopists (attending physician or associated chief physician) with experience or measured by CHESS ruler. Kappa test was used to test the consistency in the diameter of esophageal varices between measured values by CHESS ruler and the interpretation values by endoscopic physician experience.Results:Among 105 liver cirrhosis patients with portal hypertension, male 65 cases and female 40 cases, aged (54.8±12.2) years old, Han nationality 82 cases, Hui nationality 21 cases and Mongolian nationality 2 cases. The etiology of liver cirrhosis included chronic hepatitis B (79 cases), alcoholic liver disease (7 cases), autoimmune hepatitis (7 cases), chronic hepatitis C (2 cases), and other etiology (10 cases). Liver function of 32 cases was Child-Pugh A, Child-Pugh B 57 cases, and Child-Pugh C 16 cases. All 105 liver cirrhosis patients with cirrhotic portal hypertension were successfully measured the diameter of gastroesophageal varices by CHESS ruler, and the success rate of application of CHESS ruler was 100.0% (105/105). The procedure time from the CHESS ruler into the body to the exit of the body after measurement was (3.50±2.55) min. No complications happened in all the patients during measurement. Among 105 liver cirrhosis patients with cirrhotic portal hypertension, 96 cases (91.4%) were recognized as big gastroesophageal varices by the endoscopists. Totally 93 cases (88.6%) were considered as big gastroesophageal varices by CHESS ruler. Eight cases were recognized as big gastroesophageal varices by the endoscopist, however not by the CHESS ruler; 5 cases were recognized as big gastroesophageal varices by the CHESS ruler, but not by the endoscopists; 4 cases were not recognized as big gastroesophageal varices both by the endoscopists and CHESS ruler; 88 cases were recognized as big gastroesophageal varices both by the endoscopists and CHESS ruler. The missed diagnostic rate of big gastroesophageal varices by the endoscopists experience was 5.4% (5/93), and the Kappa value of consistency coefficient between the measurement by the CHESS ruler and the interpretation by endoscopists experience was 0.31 (95% confidence interval 0.03 to 0.60). The overall Kappa value of consistency coefficient by 6 endoscopists measured by CHESS ruler in big gastroesophageal varices diagnosis was 0.77 (95% confidence interval 0.61 to 0.93).Conclusion:As an objective measurement tool, CHESS ruler can make up for the deficiency of subjective judgment by endoscopists, accurately measure the diameter of gastroesophageal varices, and is highly feasible and safe.
ABSTRACT
Objective@# To explore the surgical design and surgical Methods for the minimally invasive extraction of embedded supernumerary teeth and to provide a reference for clinical practice.@* Methods@# A total of 87 embedded supernumerary teeth were removed from 85 patients. CBCT examination was performed before the operation. The nearest surgical approach was selected based on the distance between the embedded supernumerary teeth and the bony plate of the buccal tongue (lip and palate). The CBCT measuring ruler measured the maximum diameter of the impacted dental crown. According to the radius of the buccal and tongue directions of the crown, the upper and lower boundaries (bucco-lingual direction) of the bone to be deboned were determined with reference to the top of the alveolar crest or adjacent enamel cementum. A horizontal vertical line was made from the point to the meridian, and the length of the horizontal line was 1/2 the diameter of the impacted multiple crown. Thus, the radius determined the horizontal starting and ending points of the bone to be boneless. A trapezoidal or arcuate incision was made with an electric knife under block anesthesia and local infiltration anesthesia. The incision retained the gingival papilla. The upper and lower as well as the near and far midpoints of the bone were marked with a bone ruler. Starting from the midpoint area, the upper and lower points were connected. The mesial bone was removed in the mesial direction, and the range of the removed bone was slightly larger than the radius of the crown, showing the crown of the embedded supernumerary teeth. A surgical impact air handpiece with a 45-degree elevation angle or a piezosurgery device was used to divide the crown of the embedded supernumerary teeth into two parts. The crown and dental tissues were removed in pieces, the surgical area was cleaned and rinsed, and the wound was closed. Anti-inflammatory and swelling treatments were administered after the operation, and painkillers were prepared. The patients were revisited 7 days after the operation to check for wound healing. We asked and recorded the amount of painkillers taken by the patients. @*Results@#All patients had good wound healing 7 days after the operation, and the wounds were sutured. There was no swelling on the maxillofacial surface, and the degree of opening was basically normal. No other complications such as infection or numbness occurred. Fifty-eight patients did not take painkillers. @*Conclusion@#CBCT can be used to locate the embedded supernumerary teeth in bone. The surgical approach can be chosen based on the principle of proximity. During the surgery, the bone ruler is used to accurately locate the bone and remove the embedded supernumerary teeth in pieces, which can achieve a minimally invasive effect.
ABSTRACT
Objective To develop a fixed ruler for the simulated locator to measure the distance between human organs.Methods Analyses were carried out on the problems of the existing measures of the simulated locator and clinical requirements,and then the matching of the ruler with the locator and etc were explored.The structures of the fixing hole and slots were determined,and the ruler base was selected.The ruler was composed of an organic glass plate with multi slots and multi cylindrical copper wires.Results At the isocenter of the locator,the fixed scale values of the ruler equaled to those of the ruler on the screen,and the values for multi point distances could be obtained with the fixed ruler and stored in medical image.Conclusion The fixed ruler measures the distance between human organs simply and accurately,and lays a foundation for the development of likely product.
ABSTRACT
Objective:The purpose of the study was to evaluate and compare hand tracings on conventional lateral cephalograms with different calibration techniques available in dolphin imaging on digital lateral cephalogram. Materials and Methods:50 Conventional lateral cephalogram and 50 digital lateral cephalogram were taken in (NHP) at same period of timeon the same patient. Two angular measurements Facial Axis Angle and ANB angle two linear measurements Sella to Nasion and Sella to articulare have been taken. The digital images were traced by calibration 3 techniques Ruler, DPI and Land mark available in Dolphin Imaging Software Version 11.5.The conventional were traced on lead acetate paper and data has been collected.Results: In measurement of Facial Axis Angle conventional when compared with different calibration techniques Ruler Land Mark technique show <0.001significantvalue. In measurement of ANB angle shows no significant values. In measurement of S-N length Ruler compared with DPI has shown significant p value <0.001. DPI compared with conventional shows 0.001. S-AR length has shown significant value p value 0.006, DPI compared with Landmark shows 0.007,Landmark compared with conventional shows 0.003. Conclusion: According to our study conventional when compared with calibration techniques ruler has show only one significant value DPI and land mark has shown two significant values so our study conclude that using ruler is the better option for calibration of digital radiograph. As ruler is more accurate to conventional we compare DPI and Landmark techniques to ruler, landmark shows less variation with ruler so according to our study the second option for calibration of digital radiograph is landmark and last option comes DPI.
ABSTRACT
Aim: To determine the relationship between mechanical low back pain and lumber curvature angle among bank worker computer users. Material and methods: 30 male bank worker computer users were working for continuous 4-hours at least/day, five days/week, selected randomly from National Bank of Egypt, kafrelshiekh governorate, Egypt. They divided into 2 equal groups (A and B). Male in group (A) were suffering from low back pain (LBP) within the last 6 month; male in group (B) were free from LBP. Their age was ranged from 25 to 30 years. Their body mass index was less 30 Kg/m. Lumbar curvature angle and pain intensity were measured by using the flexible ruler and visual analog scale for each participants in both groups (A and B). Results: There were significant differences in participant’s low back pain intensity (P = 0.001) and lumbar curvature angle (P = 0.001) between both groups. There was a statistically significant correlation between the pain intensity in lower back and lumbar curvature angle (P=0.001) between both groups. There was a statistically significant correlation between the pain intensity in lower back and lumbar curvature angle in both group ( A and B) (r = 0.463 and 0.37 respectively), as the pain intensity increased by increased lumber curvatuer angle. Conclusions: The bank worker computer users were more exposed to low back pain due to flattening of lumbar curve.
ABSTRACT
Aims: The precise changes in postures of each part of the spine of primigravid women are still ambiguous. This study aimed to find out the spinal curvature and pelvic tilt changes during the first pregnancy. Study Design: Observational longitudinal study (Cohort study). Place and Duration of Study: The study was conducted at a hospital clinic in Iran, between April 2014 and December 2014. Methodology: Thirty primigravid women at the first, second and third trimesters of pregnancy were recruited in this cohort study and their lumbar and thoracic curves changes and pelvic inclination angles were studied and compared with 18 age-BMI matched non-pregnant women. The curves were measured by use of a flexible ruler and the pelvic inclination angle was measured by a pelvic inclinometer device. Before starting the main study, the reliability and repeatability of the measuring tools were confirmed in this study (ICC>0.87). A one-way ANOVA and independent t-test were used for statistical analysis. Results: Marked increased curvature and inclination angles were revealed as pregnancy advanced (P<0.05). The lumbar lordosis significantly increased when the first trimester was compared with the second and third ones. The thoracic curvature showed significantly increased curvature between the first and third and between the second and third trimesters. None of the lumbar or thoracic curve showed significantly difference between the control group and pregnant women during the first trimester of pregnancy. Although ten weeks pregnancy increased lumbar lordosis and thoracic kyphosis (4.2%, 8%, respectively), but it was not significant when compared with no pregnant women. The pelvic inclination angle showed to be more sensitive than spinal curvatures as it showed significant increase within all trimesters and when compared to the control group. Interestingly, it increased nearly 2.5 times more at the end of pregnancy (236%). Conclusion: The present study showed a significant increase in most variables that became higher as the months of pregnancy increased. The results might help clinicians for prescribing suitable exercises or spinal orthoses during pregnancy. More research is recommended in this area in women intending to get pregnant.
ABSTRACT
The 2nd to 4th digit ratio (2D : 4D) reflects exposure level of sex hormones in fetal period and there are various methods for finger length measurement. The aim of this study is to identify an accurate and effective method for finger length measurement. This study was done on 272 individuals (115 males, 157 females). Data were collected by measuring index and ring finger length on both hands by calipers, ruler, photocopy, and radiography. The data were analyzed through independent t-test, paired t-test, Pearson correlation analysis using SPSS win 19.0. This study showed that the 2nd and 4th finger measured by radiography were the longest finger both of males and females and revealed the largest length difference between 2nd and 4th finger. There were significant sex differences all of 4 measurement methods in 2D : 4D, especially remarkable sex difference by radiography and photography. The 2D : 4D by indirect measurement was lower than that of direct measurement. Correlation between digit ratio by radiography and by photocopy was 0.590 and correlation between digit ratio by radiography and by calipers was 0.586. The results of this study suggest that indirect measurement by radiography can be alternated by photocopy primarily and by calipers secondarily.
Subject(s)
Female , Humans , Male , Fingers , Gonadal Steroid Hormones , Hand , Photography , Sex CharacteristicsABSTRACT
O experimento foi conduzido para comparar a eficiência dos métodos do disco medidor de forragem (DMF), o bastão graduado (BG), a régua e o medidor de capacitância (MC), utilizados em estimativas da massa de forragem (MF) em pastagens. Os instrumentos foram empregados em pastagens de capim-estrela (Cynodon nlemfuensis Vanderyst var. nlemfuensis) usadas sob condições de pastejo contínuo, taxa de lotação variável e em diferentes alturas do pasto. O delineamento foi o inteiramente ao acaso com duas repetições e os tratamentos foram quatro alturas do pasto: 5, 10, 15 e 20cm. A altura do pasto nos piquetes foi mantida por ajustes da taxa de lotação, usando-se novilhas da raça Nelore (Bos indicus). As avaliações nos pastos foram realizadas em períodos mensais, de 7/11/2007 a 26/4/2008. A efetividade de cada método para quantificar a MF foi avaliada por equação de regressão. O MC não apresentou resultados consistentes. Os valores obtidos de coeficiente de determinação para avaliação da MF foram baixos e inferiores a 0,63 com o BG, DMF e com a régua. Medições de MF em pastos de capim-estrela sob pastejo contínuo podem ser realizadas preferivelmente com o DMF, ou com o BG e a régua.
The experiment was conducted aiming to compare the efficiency of the methods rising plate meter (RP), sward stick (SS), ruler and capacitance meter (CM), used to estimate herbage mass on pastures. The instruments were used in stargrass pasture (Cynodon nlemfuensis Vanderyst var. nlemfuensis) under continuous stocking, variable stocking rate, and sward heights. The design was completely randomized with two replicates and the treatments were sward heights: 5, 10, 15, and 20cm. The sward height at paddock was maintained by stocking rate adjustments using Nellore heifers (Bos indicus). The swards were evaluated monthly, from November 7th, 2007 to April 26th, 2008. The effectiveness of each method to quantify the herbage mass was evaluated by the regression equation. The capacitance meter did not show consistent results. The values of coefficient of determination for the evaluation of herbage mass were low and less than 0.63 with the SS, RP and the ruler. Measurements of herbage mass on swards of stargrass under continuous stocking can be performed preferably with the RP, or with the SS and the ruler.
ABSTRACT
A presente pesquisa teve por finalidade a avaliação das medidas do comprimento aparente do dente, obtidaspela régua endodôntica milimetrada em comparação com as obtidas através do compasso de pontaseca, em radiografias periapicais, iniciais de tratamentos endodônticos, realizados na Clínica de Endodontia IIda Universidade Federal de Pernambuco. Foram coletadas 200 radiografias periapicais que foram analisadasno negatoscópio com o auxílio de uma lupa com 5X de magnificação. As aferições do comprimento aparentedo dente foram realizadas com régua endodôntica milimetrada e com compasso de ponta seca. Os dados obtidos foram tabulados e analisados estatisticamente. A margem de erro utilizada na decisão dos testesestatísticos foi de 5,0%. O coeficiente de correlação de concordância entre os dois métodos de avaliação foi0,80 com intervalo 0,75 a 0,84. A média do comprimento foi 0,62 mm mais elevada, quando o método foia medida do compasso de ponta seca do que a medida do prontuário do paciente. De acordo com a metodologia empregada, conclui-se que não houve concordância entre os dois métodos avaliativos. A média do comprimento aparente do dente foi mais elevada, quando a medição foi realizada com o compasso de ponta seca do que com a régua endodôntica milimetrada.
The aim of this research was to evaluate the apparent tooth length, obtained by the endodonticmillimetered ruler, compared with those obtained through the compass needle point in periapicalradiographs of the endodontic treatment at Clinical of Endodontics II of the Federal University of Pernambuco.Two hundred periapical radiographs were analyzed in the light box with the aid of a magnifyinglens with 5X magnification. The apparent tooth length?s measurements were performed with amillimetered ruler and compass needle point. The data were statistically analyzed. The error?s margin inthe decision of the statistical tests was 5.0%. The concordance correlation coefficient between the twomethods was 0.80 with interval 0.75 to 0.84. The average length was 0.62mm higher when the methodwas the compass needle point measurement than the millimetered ruler measurement. According tothe methodology used, it was concluded that there was no agreement between the two evaluationmethods. The average of the apparent tooth length was higher when the measurement was taken with the compass needle point than with the endodontic millimetered ruler.
Subject(s)
Dental Pulp Cavity , Odontometry , RadiographyABSTRACT
OBJECTIVES: The objective of this study was to develop a new device that provides a simple, noninvasive method of measuring accurate lesion size while using an endoscope. METHODS: We developed a rigid laryngoscope with a built-in laser-ruler using a one-light emitting diode and an acrylic plate. The invention incorporates a built-in laser diode that projects an auto-parallel beam into the optical path of the rigid laryngoscope to form two spots in the field of view. RESULTS: While the interspot distance remains consistent despite changes in focal plane, magnification, or viewing angle of the laryngoscope, projection to an uneven surface introduces certain variations in the shape, and size of the spots, and the distance between the two spots. CONCLUSION: The device enables a laryngologist to easily measure the distance between landmarks, as well as the change in real size, and the progressive change of vocal fold lesions in an outpatient setting.
Subject(s)
Humans , Enzyme Multiplied Immunoassay Technique , Inventions , Laryngoscopes , Outpatients , Vocal Cords , Natural ResourcesABSTRACT
PURPOSE: The zygoma is a key element which composes the facial contour. Zygomatic fracture induces facial asymmetry. We use radiologic evaluation or inspections mainly for identification of symmetry after reduction depressed zygomatic fracture. But the disadvantages of such methods are time-consuming and complicated process. So we tried to develop a new testing method with a ruler and a level. METHODS: In unilateral depressed zygomatic fracture patient, parallel to the patient's head to make sure lay horizontaly. Put the leg of a ruler on the malar eminence so that it is at the same distance from the facial midline. Then take the level of malar eminence as put the level above the ruler. This process was performed before and after the reduction. RESULTS: We were able to fix with plate and screw after checking the results of reduction fast and easily. Good results were obtained at post-operative radiologic evaluation. CONCLUSION: We can easily get the ruler and level around life. This method is not only simple but also short-time process compared with other method-radiologic evaluation or inspection. And the operator can explain the results to the patients easily and objectively. Authors obtained the good results with this new method, and would introduce it for another method of identifying the result of reduction in depressed zygomatic fractures.
Subject(s)
Humans , Facial Asymmetry , Head , Leg , Zygoma , Zygomatic FracturesABSTRACT
Objective To explore the impact of concentrated teaching, self-help training, intensive training, scenario simulation and other systemic training methods on the health teaching level of community health education staff,and the impact of community health education on cultivation of residents' health behavior before and after training. Methods 60 community doctors and nurses involved in systematic training. Taught concentrated 8 hours every week, and continuous for 4 weeks with medicine, psychology, sociology, pedagogy, aesthetics and production of courseware. Trainees who awarded 80 points or more in examination took part in simulated scene training, which completed a 30-minute design of concentrated health lesson and a 15-minute design of one to one health lesson in written form and multimedia teaching. Teaching effect-site was evaluated by the residents of the community lectures. The impact on cultivation of residents' behaviors was evaluated with ruler evaluation method.Results The community health care workers' teaching ability had significant change after training: plan design (2.32 ± 1.41 vs 4.26 ±0.61 ), lectures (2.63 ±0.89 vs 4.09 ±0.93), teaching skills ( 1.97 ± 1.32 vs 3.89 ±1. 13 ), teaching aids configuration ( 1.68 ± 1. 43 vs 3.97 ± 1. 26 ), educational methods ( 2.01 ± 0. 96 vs 4.03 ±0.82), time control (2.83 ±0.26 vs 4.67 ±0.25), the classroom atmosphere (2.78 ± 1. 13 vs 4.12 ±0.67),courseware ( 2.48 ± 1. 08 vs 3.89 ± 1.02 ) , teaching the image ( 2.15 ± 1.15 vs 4.06 ± 0.78 ), overall evaluation (2.36 ± 1.21 vs 4. 16 ± 0.65 )(P ＜ 0. 0 1 ). After training, community residents' knowledge on community health care workers' one to one health education and collective health education training, and positive evaluation of helpful to students' behavior improved significantly ( x2 = 17.19,36.37 ;8.91,20.98 ;34.14,32.29) ,and all had remarkable difference( all P＜0. 01 ). Evaluating the impact of health care workers' teach on cultivating residents'health behavior after one year, it improved significantly (P ＜ 0. 01 ). Conclusion Systemic training can improve health education ability of community medical staff and the impact on cultivating residents' health behavior is remarkable.
ABSTRACT
BACKGROUND: To enumerate leukocyte count in cerebrospinal fluid (CSF) is important for diagnosing bacterial meningitis. Using automated hematology analyzer for enumeration of leukocyte in CSF is below the sensitivity, so microscopic hemocytometric method is standard method. But this requires sufficient practical experience and has limitation of accuracy and stability. So we developed new manual method and evaluated it. METHODS: We designed new method using transparent ruler tape. We performed correlation, accuracy and precision test by counting leukocyte in diluted EDTA blood with three methods: new method, Neubauer and Nageotte hemocytometry. Twenty two CSF were used for stability test, which determines leukocyte count according to time (within one hour and after 2, 4 and 12 hr), by new method and Neubauer hemocytometry at room temperature. RESULTS: There was no clinical significant difference between three methods in correlation test, whereas Neubauer and Nageotte hemocytometry showed a bias to underestimation relative to the results obtained with new method in case with low leukocyte count. The new method showed the lowest CV and most accurate result. In stability test, leukocyte counts decreased being 44.4%, 72.1% of initial values after 2 hr, 14.8%, 31.1%, after 4 hr and 4.2%, 8.7%, after 12 hr, by Nageotte hemocytometry and new method, respectively. CONCLUSIONS: The new method we devised is simple, easy and applicable to use in a laboratory and offers advantages of improved precision and stability. It may be sufficient for replacing standard methods for leukocyte counting in CSF.