Reconstruction of rat calvarial defects utilizing an ultraviolet-cured hydrogel loaded with bone marrow mesenchymal stem cells / 口腔疾病防治

Objective@#To investigate the osteogenic properties of a methacrylated gelatin (GelMA) / bone marrow mesenchymal stem cells (BMSCs) composite hydrogel applied to the skull defect area of rats and to provide an experimental basis for the development of bone regeneration biomaterials.@*Methods@#This study was approved by the Animal Ethics Committee of Nanjing University. A novel photocurable composite biohydrogel was developed by constructing photoinitiators [lthium phenyl (2,4,6-trimethylbenzoyl) phosphinate, LAP], GelMA, and BMSCs. The surface morphology and elemental composition of the gel were examined using scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDX). The compressive strength of the gel was evaluated using an electronic universal testing machine. After in vitro culture for 1, 2, and 5 days, the proliferation of the BMSCs in the hydrogels was assessed using a CCK-8 assay, and their survival and morphology were examined through confocal microscopy. A 5 mm critical bone deficiency model was generated in a rat skull. The group receiving composite hydrogel treatment was referred to as the GelMA/BMSCs group, whereas the untreated group served as the control group. At the 4th and 8th weeks, micro-CT scans were taken to measure the bone defect area and new bone index, while at the 8th week, skull samples from the defect area were subjected to H&E staining, van Gieson staining, and Goldner staining to evaluate the quality of bone regeneration and new bone formation.@*Results@#SEM observed that the solidified GelMA showed a 3D spongy gel network with uniform morphology, the porosity of GelMA was 73.41% and the pore size of GelMA was (28.75 ± 7.13) μm. EDX results showed that C and O were evenly distributed in the network macroporous structure of hydrogel. The hydrogel compression strength was 152 kPa. On the 5th day of GelMA/BMSCs culture, the cellular morphology transitioned from oval to spindle shaped under microscopic observation, accompanied by a significant increase in cell proliferation (159.4%, as determined by the CCK-8 assay). At 4 weeks after surgery, a 3D reconstructed micro-CT image revealed a minimal reduction in bone defect size within the control group and abundant new bone formation in the GelMA/BMSCs group. At 8 weeks after surgery, no significant changes were observed in the control group's bone defect area, with only limited evidence of new bone growth; however, substantial healing of skull defects was evident in the GelMA/BMSCs group. Quantitative analysis at both the 4- and 8-week examinations indicated significant improvements in the new bone volume (BV), new bone volume/total bone volume (BV/TV), bone surface (BS), and bone surface/total bone volume (BS/TV) in the GelMA/BMSCs group compared to those in the control group (P<0.05). Histological staining showed continuous and dense formation of bone tissue within the defects in the GelMA/BMSCs group and only sporadic formation of new bone, primarily consisting of fibrous connective tissue, at the defect edge in the control group.@*Conclusion@#Photocuring hydrogel-based stem cell therapy exhibits favorable biosafety profiles and has potential for clinical application by inducing new bone formation and promoting maturation within rat skull defects.

Bioceramic scaffolds with two-step internal/external modification of copper-containing polydopamine enhance antibacterial and alveolar bone regeneration capability / 浙江大学学报（英文版）（B辑：生物医学和生物技术）

Magnesium-doped calcium silicate (CS) bioceramic scaffolds have unique advantages in mandibular defect repair; however, they lack antibacterial properties to cope with the complex oral microbiome. Herein, for the first time, the CS scaffold was functionally modified with a novel copper-containing polydopamine (PDA(Cu2+‍)) rapid deposition method, to construct internally modified (*P), externally modified (@PDA), and dually modified (*P@PDA) scaffolds. The morphology, degradation behavior, and mechanical properties of the obtained scaffolds were evaluated in vitro. The results showed that the CS*P@PDA had a unique micro-/nano-structural surface and appreciable mechanical resistance. During the prolonged immersion stage, the release of copper ions from the CS*P@PDA scaffolds was rapid in the early stage and exhibited long-term sustained release. The in vitro evaluation revealed that the release behavior of copper ions ascribed an excellent antibacterial effect to the CS*P@PDA, while the scaffolds retained good cytocompatibility with improved osteogenesis and angiogenesis effects. Finally, the PDA(Cu2+)-modified scaffolds showed effective early bone regeneration in a critical-size rabbit mandibular defect model. Overall, it was indicated that considerable antibacterial property along with the enhancement of alveolar bone regeneration can be imparted to the scaffold by the two-step PDA(Cu2+) modification, and the convenience and wide applicability of this technique make it a promising strategy to avoid bacterial infections on implants.

Telocytes in Human Embryonic Development: A Preliminary Microscopic Anatomy Study / Telocitos en el Desarrollo Embrionario Humano: Un Estudio Preliminar de Anatomía Microscópica

SUMMARY: Telocytes are a cell population described in 2011 with a multitude of functions such as tissue support, regulation of stem cell niches or intercellular signal transmission. However, there are no studies about their embryonic origin, their function in development, or their moment of appearance. The objective of this work is to try to answer these questions through histological and immunofluorescence studies with samples from the embryological collection of the Department of Anatomy of the University of Granada. In the results obtained, as demonstrated by immunofluorescence for CD34, the presence of these cells can be seen in the fourth week of embryonic development in the perinotochordal region. Its presence is evident from the sixth week of development in a multitude of organs such as the heart, skeletal muscle tissue and supporting tissue of various organs such as the kidney, brain or pericardium. Its function seems to be when the embryonic histological images are analyzed in an evolutionary way, to act as a scaffold or scaffold for the subsequent population by mature tissue elements. In conclusion, telocytes appear at a very early stage of embryonic development and would have a fundamental role in it as scaffolding and directors of organ and tissue growth.

Los telocitos son una población celular descrita en 2011 con multitud de funciones como el sostén tisular, la regulación de los nichos de células madre o la transmisión de señales intercelulares. Sin embargo, no existen estudios acerca del origen embrionario de los mismos, su función en el desarrollo ni su momento de aparición. El objetivo de este trabajo es tratar de responder a estos interrogantes mediante estudios histológicos y por inmunofluorescencia con muestras de la colección embriológica del Departamento de Anatomía de la Universidad de Granada. En los resultados se puede observar como se demuestra mediante inmunofluorescencia para CD34, la presencia de estas células en la cuarta semana del desarrollo embrionario en la región perinotocordal. Su presencia se evidencia a partir de la sexta semana del desarrollo en multitud de órganos como corazón, tejidos músculo esqueléticos y tejidos de sostén de diversos órganos como riñón, encéfalo o pericardio. Su función parece ser al ser analizadas las imágenes histológicas embrionarias de forma evolutiva, la de actuar como un andamiaje o scafold para el posterior poblamiento por elementos tisulares maduros. Como conclusión, los telocitos aparecen en un momento muy precoz del desarrollo embrionario y presentarían una función fundamental en el mismo como andamiajes y directores del crecimiento de los órganos y tejidos.

Demineralized dentin matrix technique - a comparison of different demineralizing solutions

Abstract This study aimed to evaluate the microstructure formed after the chemical treatment of teeth, for the development of autogenous grafts from the demineralized dentin matrix (DDM) technique, in order to identify the most efficient demineralizing solution. The specimens, originating from the root and coronal portion, were submitted to ultrasonic cleaning and drying in an oven for 1h at 100 ºC. Then, the density was determined by Archimedes' principle for each specimen, using distilled water as immersion liquid. The samples were separated into five groups: Control group: negative control, Distilled water;EDTA group: positive control, trisodium EDTA; NaOCl group: 2.5% sodium hypochlorite; HCl-0.6M group: 0.6M hydrochloric acid; and H2O2/H2SO4 group: hydrogen peroxide and sulfuric acid. Each specimen was immersed for 1h in the corresponding group descaling solution at 60 ºC. Subsequently, the mass loss and density of the treated specimens were determined by Archimedes' principle. Ultimately, the specimens of each group were characterized by microtomography, Scanning Electron Microscopy, and Energy Dispersive Spectrometry X-ray (SEM-EDS). The results demonstrated that the H2O2/H2SO4 solution allowed the formation of interconnected micropores, suggesting better pore structures for application in scaffolds, when compared to the other studied solutions.

Resumo Este estudo teve como objetivo avaliar a microestrutura formada após o tratamento químico em dentes, para o desenvolvimento de enxertos autógenos a partir da técnica de matriz de dentina desmineralizada (DDM), a fim de identificar a solução desmineralizante mais eficiente. Os espécimes, provenientes da raiz e porção coronal, foram submetidos à limpeza ultrassônica e secagem em estufa por 1h a 100 ºC. Em seguida, a densidade foi determinada pelo princípio de Arquimedes para cada espécime, utilizando água destilada como líquido de imersão. As amostras foram separadas em cinco grupos: Controle: controle negativo, Água destilada; EDTA: controle positivo, EDTA trissódico; NaOCl: hipoclorito de sódio 2,5%; HCl-0.6M: ácido clorídrico 0,6M; e H2O2/H2SO4: peróxido de hidrogênio e ácido sulfúrico. Cada espécime foi imerso por 1h na solução descalcificante de grupo correspondente a 60 ºC. Posteriormente, a perda de massa e a densidade dos espécimes tratados foram determinadas pelo princípio de Arquimedes. Por fim, os espécimes de cada grupo foram caracterizados por microtomografia, microscopia eletrônica de varredura e espectrometria de energia dispersiva de raios-X (SEM-EDS). Os resultados demonstraram que a solução H2O2/H2SO4 permitiu a formação de microporos interligados, sugerindo melhores estruturas de poros para aplicação em scaffolds, quando comparada às demais soluções estudadas.

Expression of Stro-1, Runx-2, Osterix, and Alp in Alveolar Bone Regeneration Process Following the Administration of Hydroxyapatite Gypsum Puger (HAGP) Scaffold

@#Introduction: Tooth extraction before denture placement could result in trauma and damage to up to 50% of the alveolar bone, inducing bone resorption, and affecting the patient’s quality of life. Hydroxyapatite Gypsum Puger (HAGP) can be used as an alternative to bone graft material which degrades slowly, affecting the proliferation and activity of cells that are responsible for bone tissue engineering. This study aimed to analyze the regeneration mechanism of alveolar bone by administering the HAGP scaffold and observing the Stro-1, Runx-2, Osterix, and ALP expression. Methods: Laboratory experimental research was conducted and we used 150-355µm HAGP scaffold particles, applied in vivo inside alveolar sockets of the rats for 7, 14, and 28 days, followed by immunohistochemical examination of Stro-1, Runx-2, Osterix, and ALP expressions. Results: The HAGP scaffold group showed that the Stro-1 expression was significantly higher than the K(-) group, and the Runx-2 expression increased on day 7 and decreased on day 28 in the HAGP and K(-) groups. Osterix expression increased from day 7, 14, to day 28. The high expression of Osterix on day 28 means it took over the Runx-2 function. In ALP there was a significant increase on day 7. ALP expression was a sign of early osteoblast differentiation and production by cells, this extracellular matrix mineralization is an indicator of the osteogenic process. Conclusion: Alveolar bone regeneration mechanism in rats revealed that the expression of Stro-1, Runx-2, Osterix, and ALP was higher in the HAGP scaffold group compared to the control group on days 7,14, and 28.

Application of three dimensional bio-printing materials for tissue engineering tracheal grafting / 中华器官移植杂志

Currently three dimensional bio-printing technology has become one of the hot topics for tissue engineering tracheal grafting.Different biomaterials have their own performance advantages in the preparation and regeneration of tracheal scaffolds.It is particularly imperative to seek natural or polymeric materials with excellent profiles of printability, structural stability and biocompatibility to enable neo-cartilage formation, neo-epithelialization and neo-vascularization of tissue engineering trachea grafting.This review summarized the shortcomings and challenges of classifying and applying materials for three dimensional bio-printing tissue engineering trachea, aiming to provide new rationales for researches and applications of tissue engineering tracheal grafting.

Research methods and progress of gradient multiphase scaffold materials promoting rotator cuff tenon-bone interface repair and regeneration / 中华骨科杂志

Regeneration of rotator cuff tendon-bone interface is crucial in rotator cuff repair. The tendon-bone interface consists of four continuous and gradual regions: the tendon region, the unmineralized fibrocartilage region, the mineralized fibrocartilage region, and the bone region. The development and regeneration of various regions in the tendon-bone interface is regulated by growth factors, inorganic ions, mechanical stimulation, and hypoxic environment. Inspired by factors affecting the development and regeneration of the tendon-bone interface, many researchers have designed gradient scaffold systems that promote regionalized regeneration of the tendon-bone interface. The gradient distribution of these scaffolds includes inorganic ion gradients and growth factor gradients. According to different gradients of the scaffold system, osteogenesis, chondrogenesis and tendon differentiation of cells at the tendon-bone interface are promoted, and the healing of the tendon-bone is synchronously completed to realize the repair and regeneration of the rotator cuff tendon-bone interface. Current studies indicated that gradient multiphase scaffolds had high academic research value and guided significance for future clinical applications in the reconstruction of the tendon-bone interface. In this paper, the factors affecting the development and regeneration of the tendon-bone interface are reviewed, and the effects of these factors on osteogenesis, chondrogenesis and tendon formation of various regions in promoting rotator cuff tendon-bone interface repair are summarized. The properties and effects of reported gradient multiphase scaffolds for rotator cuff injury are discussed, including gradient scaffolds containing inorganic ions and growth factors. Finally, the problems and future development opportunities of gradient multiphase support in rotator cuff repair are summarized.

Research progress of the application of peptide hydrogel in the revascularization of pulp regeneration / 国际生物医学工程杂志

In recent years, problems such as the devitalization of dental pulp and the increased brittleness and fragility of teeth after root canal treatment have attracted more and more attention. Therefore, pulp regeneration has become the focus of research in endodontics and periapical disease, in which vascularization is of paramount importance. It is found that peptide hydrogel scaffolds have been widely applied because of their properties of impacting cell behavior, promoting angiogenesis, and being adaptable. In this review paper, the research progress of the application of peptide hydrogel in the vascularization of pulp regeneration and the properties of various peptide hydrogels were summarized to provide a reference for the further application of peptide hydrogel in pulp regeneration.

Stress Relaxation Behavior of Collagen Type II- Silk Fibroin Composite Cartilage Scaffold under Different Degradation Cycles / 医用生物力学

Objective To study stress relaxation behaviors of cartilage scaffolds under different degradation cycles by using finite element analysis combined with theoretical models. Methods Based on the established degradation theoretical model, the elastic modulus of the scaffold was calculated under different degradation cycles. The finite element model of cartilage scaffolds was established and stress relaxation simulation was performed to analyze the variation of scaffold relaxation stress with time. The stress relaxation constitutive model was established to predict mechanical properties of the scaffold. Results The elastic modulus of cartilage scaffolds at 14 th, 28th, 42nd, 56th day after degradation was 32. 35, 31. 12, 29. 91, 28. 74 kPa, respectively. The upper layer for cartilage scaffolds was the largest. The overall relaxation stress of the scaffold decreased rapidly with time and then tended to be stable. At 8th week after degradation, the stress which the scaffold couldwithstand was still within the physiological load range of the cartilage. The predicted results of the stress relaxation constitutive model were in good agreement with the finite element simulation results. Conclusions The elastic modulus of the scaffold gradually decreases with the increase of degradation time. The longer the degradation period is, the less stress the scaffold can withstand. At the same degradation period, the larger the applied compressive strain, the larger the stress on the scaffold. Both the finite element simulation and stress relaxation constitutive model can effectively predict stress variations of cartilage scaffolds under degradation

In vivo transplantation of eye organoids and application of tissue engineering scaffolds / 器官移植

Eye organoid refers to a structure that possesses resembling cell types and functions to intraocular tissues, which is induced by stem cells in vitro. Transplanting it into the body for eye repair and regeneration is one of the key research directions in regenerative medicine, which also provides a novel direction and strategy for the treatment of major blinding diseases. As a carrier of biological tissue or cell growth, tissue engineering scaffold could support in vivo transplantation of eye organoids and promote their maturation. Organic combination of eye organoids and tissue engineering is a critical approach to realize in vivo integration of eye organoids and reconstruct corresponding structures and functions. In this review, the latest research status of eye organoids and in vivo transplantation were summarized, and relevant studies of tissue engineering scaffold-assisted eye organoid transplantation were highlighted, aiming to provide ideas and reference for subsequent inter-disciplinary research of eye organoids and tissue engineering.

Application of gelatin microspheres in bone tissue engineering / 生物工程学报

Gelatin microspheres were discussed as a scaffold material for bone tissue engineering, with the advantages of its porosity, biodegradability, biocompatibility, and biosafety highlighted. This review discusses how bone regeneration is aided by the three fundamental components of bone tissue engineering-seed cells, bioactive substances, and scaffold materials-and how gelatin microspheres can be employed for in vitro seed cell cultivation to ensure efficient expansion. This review also points out that gelatin microspheres are advantageous as drug delivery systems because of their multifunctional nature, which slows drug release and improves overall effectiveness. Although gelatin microspheres are useful for bone tissue creation, the scaffolds that take into account their porous structure and mechanical characteristics might be difficult to be created. This review then discusses typical techniques for creating gelatin microspheres, their recent application in bone tissue engineering, as well as possible future research directions.

Parotid duct anastomosis with an epidural catheter as a stent and evaluation of postoperative gland function / 口腔疾病防治

Objective @#To investigate the feasibility of epidural catheters in parotid gland duct anastomosis and the function of the affected side gland after parotid gland duct anastomosis. @* Methods@# Thirteen patients who were treated in the Department of Oral and Maxillofacial Surgery of Xuzhou Central Hospital using an epidural catheter as the scaffold for parotid gland catheter anastomosis were enrolled from Jan. 2019 to June 2021. The swelling, salivary fistula and catheter patency in the parotid gland area were evaluated two weeks after the operation. 99mTcO4- single photon emission computed tomography (SPECT) was used for quantitative detection of salivary gland secretion function@*Results@# Thirteen patients had no swelling or salivary fistula in the parotid gland area of the affected side two weeks after the operation, and the catheter secretion was unobstructed. There was no significant difference in the uptake rate between the parotid gland on the affected side and the parotid gland on the healthy side (t = -0.859, P = 0.399), and there was no significant difference in the excretion rate between the parotid gland on the affected side and the parotid gland on the healthy side (t = 0.693, P = 0.495). The parotid gland excretion function of the affected side was excellent three months after the operation.@*Conclusion @#Parotid duct anastomosis with an epidural catheter as the stent has good feasibility, and parotid gland secretion function recovers well after the operation, which is worthy of clinical application.

Deubiquitination complex platform: A plausible mechanism for regulating the substrate specificity of deubiquitinating enzymes

Deubiquitinating enzymes (DUBs) or deubiquitinases facilitate the escape of multiple proteins from ubiquitin‒proteasome degradation and are critical for regulating protein expression levels in vivo. Therefore, dissecting the underlying mechanism of DUB recognition is needed to advance the development of drugs related to DUB signaling pathways. To data, extensive studies on the ubiquitin chain specificity of DUBs have been reported, but substrate protein recognition is still not clearly understood. As a breakthrough, the scaffolding role may be significant to substrate protein selectivity. From this perspective, we systematically characterized the scaffolding proteins and complexes contributing to DUB substrate selectivity. Furthermore, we proposed a deubiquitination complex platform (DCP) as a potentially generic mechanism for DUB substrate recognition based on known examples, which might fill the gaps in the understanding of DUB substrate specificity.

Clinical value of plasma scaffold protein SEC16A in evaluating hepatitis B-related liver cirrhosis and hepatocellular carcinoma / 中华肝脏病杂志

Objective: To investigate the clinical value of plasma scaffold protein SEC16A level and related models in the diagnosis of hepatitis B virus-related liver cirrhosis (HBV-LC) and hepatocellular carcinoma (HBV-HCC). Methods: Patients with HBV-LC and HBV-HCC and a healthy control group diagnosed by clinical, laboratory examination, imaging, and liver histopathology at the Third Hospital of Hebei Medical University between June 2017 and October 2021 were selected. Plasma SEC16A level was detected using an enzyme-linked immunosorbent assay (ELISA). Serum alpha-fetoprotein (AFP) was detected using an electrochemiluminescence instrument. SPSS 26.0 and MedCalc 15.0 statistical software were used to analyze the relationship between plasma SEC16A levels and the occurrence and development of liver cirrhosis and liver cancer. A sequential logistic regression model was used to analyze relevant factors. SEC16A was established through a joint diagnostic model. Receiver operating characteristic curve was used to evaluate the clinical efficacy of the model for liver cirrhosis and hepatocellular carcinoma diagnosis. Pearson correlation analysis was used to identify the influencing factors of novel diagnostic biomarkers. Results: A total of 60 cases of healthy controls, 60 cases of HBV-LC, and 52 cases of HBV-HCC were included. The average levels of plasma SEC16A were (7.41 ± 1.66) ng/ml, (10.26 ± 1.86) ng/ml, (12.79 ± 1.49) ng /ml, respectively, with P < 0.001. The sensitivity and specificity of SEC16A in the diagnosis of liver cirrhosis and hepatocellular carcinoma were 69.44% and 71.05%, and 89.36% and 88.89%, respectively. SEC16A, age, and AFP were independent risk factors for the occurrence of HBV-LC and HCC. SAA diagnostic cut-off values, sensitivity, and specificity were 26.21 and 31.46, 77.78% and 81.58%, and 87.23% and 97.22%, respectively. The sensitivity and specificity for HBV-HCC early diagnosis were 80.95% and 97.22%, respectively. Pearson correlation analysis showed that AFP level was positively correlated with alanine aminotransferase (ALT), aspartate aminotransferase (AST), total bilirubin (TBil), and γ-glutamyltransferase (GGT) with P < 0.01, while the serum SEC16A level was only slightly positively correlated with ALT and AST in the liver cirrhosis group (r = 0.268 and 0.260, respectively, P < 0.05). Conclusion: Plasma SEC16A can be used as a diagnostic marker for hepatitis B-related liver cirrhosis and hepatocellular carcinoma. SEC16A, combined with age and the AFP diagnostic model with SAA, can significantly improve the rate of HBV-LC and HBV-HCC early diagnosis. Additionally, its application is helpful for the diagnosis and differential diagnosis of the progression of HBV-related diseases.

Research progress in influence of microstructure on performance of triply-periodic minimal surface bone scaffolds / 中国修复重建外科杂志

OBJECTIVE@#To summarize the influence of microstructure on performance of triply-periodic minimal surface (TPMS) bone scaffolds.@*METHODS@#The relevant literature on the microstructure of TPMS bone scaffolds both domestically and internationally in recent years was widely reviewed, and the research progress in the imfluence of microstructure on the performance of bone scaffolds was summarized.@*RESULTS@#The microstructure characteristics of TPMS bone scaffolds, such as pore shape, porosity, pore size, curvature, specific surface area, and tortuosity, exert a profound influence on bone scaffold performance. By finely adjusting the above parameters, it becomes feasible to substantially optimize the structural mechanical characteristics of the scaffold, thereby effectively preempting the occurrence of stress shielding phenomena. Concurrently, the manipulation of these parameters can also optimize the scaffold's biological performance, facilitating cell adhesion, proliferation, and growth, while facilitating the ingrowth and permeation of bone tissue. Ultimately, the ideal bone fusion results will obtain.@*CONCLUSION@#The microstructure significantly and substantially influences the performance of TPMS bone scaffolds. By deeply exploring the characteristics of these microstructure effects on the performance of bone scaffolds, the design of bone scaffolds can be further optimized to better match specific implantation regions.

Research progress on the design of bone scaffolds with different single cell structures / 中国修复重建外科杂志

OBJECTIVE@#To review the research progress of design of bone scaffolds with different single cell structures.@*METHODS@#The related literature on the study of bone scaffolds with different single cell structures at home and abroad in recent years was extensively reviewed, and the research progress was summarized.@*RESULTS@#The single cell structure of bone scaffold can be divided into regular cell structure, irregular cell structure, cell structure designed based on topology optimization theory, and cell structure designed based on triply periodic minimal surface. Different single cell structures have different structural morphology and geometric characteristics, and the selection of single cell structure directly determines the mechanical properties and biological properties of bone scaffold. It is very important to choose a reasonable cell structure for bone scaffold to replace the original bone tissue.@*CONCLUSION@#Bone scaffolds have been widely studied, but there are many kinds of bone scaffolds at present, and the optimization of single cell structure should be considered comprehensively, which is helpful to develop bone scaffolds with excellent performance and provide effective support for bone tissue.

Preparation of functional polyhydroxyalkanoate microspheres and their antibacterial activity and osteogenic effect evaluation / 中国修复重建外科杂志

OBJECTIVE@#To construct polyhydroxyalkanoate (PHA) microspheres loaded with bone morphogenetic protein 2 (BMP-2) and human β-defensin 3 (HBD3), and evaluate the antibacterial activity of microspheres and the effect of promoting osteogenic differentiation, aiming to provide a new option of material for bone tissue engineering.@*METHODS@#The soybean lecithin (SL)-BMP-2 and SL-HBD3 were prepared by SL-mediated introduction of growth factors into polyesters technology, and the functional microsphere (f-PMS) containing BMP-2 and HBD3 were prepared by microfluidic technology, while pure microsphere (p-PMS) was prepared by the same method as the control. The morphology of microspheres was observed by scanning electron microscopy and the water absorption was detected; the release curves of BMP-2 and HBD3 in f-PMS were detected by ELISA kit. The antibacterial effect of microspheres in Staphylococcus aureus and Escherichia coli was tested with the LIVE/DEADTM BacLightTM bacterial staining kit; the biocompatibility of microspheres was tested using Transwell and cell counting kit 8 (CCK-8). The effect of microspheres on osteogenic differentiation was determined by collagen type Ⅰ (COL-1) immunofluorescence staining and alkaline phosphatase (ALP) concentration.@*RESULTS@#In this experiment, the f-PMS and p-PMS were successfully constructed. Morphological characteristics showed that p-PMS surface was rough and distributed with micropores of 1-3 μm, while f-PMS surface was smooth and existed white granular material. There was no significant difference in water absorption between the two groups (P>0.05). The release curves of BMP-2 and HBD3 in the f-PMS and p-PMS were basically the same, showing both early sudden release and late slow release. The antibacterial activity of f-PMS was significantly higher than that of p-PMS in the test that against Staphylococcus aureus and Escherichia coli (P<0.05), but there was no significant difference in biocompatibility between the two groups (P>0.05). The results of osteogenic differentiation of human BMSCs showed that the fluorescence intensity of osteogenic specific protein COL-1 of f-PMS was significantly higher than that in p-PMS, and the activity of ALP in f-PMS was also significantly higher than that in p-PMS (P<0.05).@*CONCLUSION@#The p-PHA have good antibacterial activity and biocompatibility, and can effectively promote the osteogenic differentiation of human BMSCs, which is expected to be applied to bone tissue engineering in the future.

Dentin slice model of dental stem cells in a fibrin-agarose construct for dental pulp regeneration / Modelo de trozo de dentina de células madre dentales en una construcción de fibrina-agarosa para la regeneración de la pulpa dental

Objectives: To implement a dentin slice model of mesenchymal stem cells derived from dental tissues in a fibrin-agarose construct for dental pulp regeneration. Material and Methods: MSCs derived from different oral cavity tissues were combined with a fibrin-agarose construct at standard culture conditions. Cell viability and proliferation tests were assayed using a fluorescent cell dye Calcein/Am and WST-1 kit. The proliferation assay was evaluated at 24, 48, 72, and 96 hours. Also, we assessed the dental pulp stem cells (DPSCs) cell morphology inside the construct with histological stains such as Hematoxylin and Eosin, Masson's trichrome, and Periodic acid­Schiff. In addition, we elaborated a tooth dentin slice model using a culture of DPSC in the fibrin­agarose constructs co-adhered to dentin walls. Results: The fibrin-agarose construct was a biocompatible material for MSCs derived from dental tissues. It provided good conditions for MSCs' viability and proliferation. DPSCs proliferated better than the other MSCs, but the data did not show significant differences. The morphology of DPSCs inside the construct was like free cells. The dentin slice model was suitable for DPSCs in the fibrin-agarose construct. Conclusion: Our findings support the dentin slice model for future biological use of fibrin-agarose matrix in combination with DPSCs and their potential use in dental regeneration. The multipotency, high proliferation rates, and easy obtaining of the DPSCs make them an attractive source of MSCs for tissue regeneration.

Objetivos: Implementar un modelo de dentina con células madre mesenquimales derivadas de tejidos dentales en una constructo de fibrina-agarosa para la regeneración de la pulpa dental. Material y Métodos: Las MSC derivadas de diferentes tejidos de la cavidad oral se combinaron con una construcción de fibrina-agarosa en condiciones de cultivo estándar. Las pruebas de viabilidad y proliferación celular se ensayaron utilizando un kit de colorante celular fluorescente Calcein/Am y WST-1. El ensayo de proliferación se evaluó a las 24, 48, 72 y 96 horas. Además, evaluamos la morfología celular de las células madre de la pulpa dental (DPSC) dentro de la construcción con tinciones histológicas como hematoxilina y eosina, tricrómico de Masson y ácido peryódico de Schiff. Además, elaboramos un modelo de rebanadas de dentina dental utilizando un cultivo de DPSC en las construcciones de fibrina-agarosa coadheridas a las paredes de la dentina. Resultados: La construcción de fibrina-agarosa fue un material biocompatible para las MSC derivadas de tejidos dentales. Proporcionó buenas condiciones para la viabilidad y proliferación de las MSC. Las DPSC proliferaron mejor que las otras MSC, pero los datos no mostraron diferencias significativas. La morfología de las DPSC dentro de la construcción era como la de las células libres. El modelo de corte de dentina fue adecuado para DPSC en la construcción de fibrina-agarosa.Conclusión: Nuestros hallazgos respaldan el modelo de corte de dentina para el futuro uso biológico de la matriz de fibrina-agarosa en combinación con DPSC y su uso potencial en la regeneración dental. El multipotencial, las altas tasas de proliferación y la fácil obtención de las DPSC las convierten en una fuente atractiva de MSC para la regeneración de tejidos.

A novel biodegradable polymer scaffold for in vitro growth of corneal epithelial cells

The shortage of donor corneal tissue worldwide has led to extensive research for alternate corneal equivalents utilizing tissue engineering methods. We conducted experiments using Poly D, L lactic acid polymer along with a copolymer (Eudragit) in varying concentrations to create a biodegradable scaffold suitable for in vitro growth of corneal epithelial stem cells. It was found that stable, spherical, and porous microparticles can be prepared by combining PDLLA and Eudragit RL100 polymers in the ratio of 90:10 and 70:30. The microparticles can then be fused to form scaffold membranes with porous architecture and good water retention capacity at room temperature using methanol, which can withstand handling during transplantation procedures. The scaffolds made using a 70:30 ratio were found to be suitable for the promotion of growth of laboratory corneal epithelial stem cell lines (SIRC cell lines). This innovation can pave way for further developments in corneal stem cell research and growth, thus providing for viable laboratory-derived corneal substitutes.