Recent Advances in the development of Modified Release Tablets by amalgamating both Solubility Enhancement and Polymer Matrix Sintering Technologies.

Background: The fact that about 90 % of newly discovered API’s or new molecular entity(NME) have little or no aqueous solubility, causes a significant protest to the initialization of development and their scale up of dosage form in the Pharma Industry. Aqueous solubility of API’s has critical role in drug dissolution or availability of drug at the site of action or bioavailability, when a dosage form is administered orally.Objective: The object of this study is to formulate a modified release tablet dosage form of a poorly aqueous soluble drug, which not only have higher aqueous solubility or bioavailability but also have sustained release characteristics with high mechanical strength &their commercial viability. Numerous techniques are available for the solubility enhancement but all individual techniques have its own limitations for commercialization.Method: Aqueous solubility of drugs is improved by the known Solubility enhancement techniques like Micronization &Solid dispersions. After successful solubility enhancement, sustained release or modified release tablets of poorly aqueous soluble drug can be easily formulated into a suitable shape or size by using a known Polymer Matrix Sintering Technology with commercial feasibility. Micronization of poorly water-soluble drugs can be performed by Air Jet Mill or Ball Mill. Whereas Solid dispersion technique involves, molecular dispersion of poorly soluble drug in a suitable inert carrier, to form an amorphous and highly soluble compounds. Sintering Technology is defined as the bonding of adjacent particle surfaces in a mass of powder, or in compact, by the application of heat. Conventional sintering technique involves the heating of compact at a temperature below the melting point of the solid constituents in a controlled environment under atmospheric pressure.Results: Enhanced solubility of poorly soluble API’s by these proposed techniques is due to either conversion of crystalline compound in to amorphous form or reduction of particle size to its molecular level by the application of Micronization or solid dispersion techniques. The developed modified release tablets will show a sustained release characteristic due to Sintering aspect and provides enhanced solubility of BCS class II or IV drugs.Conclusion: Novel modified release tablets have been designed through consolidation of Solubility enhancement and Polymer Matrix Sintering technologies. Simultaneous exploitation of well-known and established approaches- Micronization (optimum particle size reduction) or solid dispersion, optional surfactant and Polymer Matrix Sintering Technique in the recent concept, produces significant enhancement of solubility of poorly water soluble API’s without compromising the content uniformity of dosage form and also provide a modified or sustained release characteristics with high mechanical strength. The release profile of drug can be easily tailored by using combination of both techniques where challenges of low solubility are prominent.

Seguimiento a 5 años de prótesis híbrida con subestructura sinterizada. Reporte de caso

RESUMEN: La rehabilitación de rebordes severamente atróficos mediante prótesis híbridas con subestructura cromo-cobalto fabricadas por sinterizado láser asegura el ajuste pasivo, aumentando la estabilidad de los tejidos de soporte a largo plazo. Los controles periódicos y enseñanza de técnicas de higiene son fundamentales para el éxito de rehabilitaciones complejas sobre implantes. El propósito de este reporte de caso es realizar la evaluación clínica y radiográfica a 5 años de prótesis híbridas maxilar y mandibular fabricadas mediante sinterizado láser, encontrándose resultados satisfactorios en la evaluación y seguimiento.

ABSTRACT: Rehabilitation of severely atrophic ridges using hybrid cobalt-chrome substructures manufactured by laser sintering ensures passive fit, increasing support tissue stability. Regular check-ups and the teaching of hygiene techniques are essential for the success of complex implant restorations. The purpose of this case report is to perform a 5-year clinical and radiographic evaluation of hybrid maxillary and mandibular prostheses manufactured using laser sintering, achieving satisfactory results in the evaluation and follow-up.

Biomechanical Study of PEEK Condyle Prosthesis Printed by Fused Deposition Modeling and Selective Laser Sintering / 医用生物力学

Objective To make finite element analysis and compressive performance test on three-dimensional (3D) printed personalized poly-ether-ether-ketone (PEEK) condyle prosthesis, so as to analyze stress distribution characteristics and mechanical properties of the prosthesis, and to evaluate its clinical value and prospect. Methods The finite element models of PEEK condyle prosthesis, mandible and fixation screw were established by software such as CBCT, Mimics, Geomagic Studio, SolidWorks and ANSYS Workbench. The maximum mastication force was applied, and the maximum stress of the condyle prosthesis and screw, as well as the stress and strain of the mandible were recorded. In order to simulate the actual clinical situation, a special fixture was designed to test compression performance of the condyle prosthesis prepared by the fused deposition modeling (FDM) and selective laser sintering (SLS) at the rate of 1 mm/min. Results The peak stress of the PEEK condyle prosthesis was 10.733 MPa, which was located at the back of the condyle neck. The peak stress of 5 fixing screws was 9.707 5 MPa, which appeared on the 2# and 5# screws near the trailing edge of the mandibular ascending branch. The peak stress of both the prosthesis and the screw was smaller than its yield strength. The maximum pressure of the condyle prosthesis prepared by FDM and SLS was (3 814.7±442.6) N and (1 193.970±260.350) N, respectively. Compared with the SLS preparation, the FDM prepared prosthesis not only had higher compression strength but also better toughness. Conclusions The 3D printed personalized PEEK condyle prosthesis shows uniform stress distributions and good mechanical properties, which can provide the theoretical basis for PEEK as reconstruction material for repairing temporomandibular joint.

Research on sintering process of tricalcium phosphate bone tissue engineering scaffold based on three-dimensional printing / 生物医学工程学杂志

Tricalcium phosphate (TCP) is one of the most widely used bioceramics for constructing bone tissue engineering scaffold. The three-dimensional (3D) printed TCP scaffold has precise and controllable pore structure, while with the limitation of insufficient mechanical properties. In this study, we investigated the effect of sintering temperature on the mechanical properties of 3D-printed TCP scaffolds in detail, due to the important role of the sintering process on the mechanical properties of bioceramic scaffolds. The morphology, mass and volume shrinkage, porosity, mechanical properties and degradation property of the scaffold was studied. The results showed that the scaffold sintered at 1 150℃ had the maximum volume shrinkage, the minimum porosity and optimal mechanical strength, with the compressive strength of (6.52 ± 0.84) MPa and the compressive modulus of (100.08 ± 18.6) MPa, which could meet the requirements of human cancellous bone. In addition, the 1 150℃ sintered scaffold degraded most slowly in the acidic environment compared to the scaffolds sintered at the other temperatures, demonstrating its optimal mechanical stability over long-term implantation. The scaffold can support bone mesenchymal stem cells (BMSCs) adherence and rapid proliferation and has good biocompatibility. In summary, this paper optimizes the sintering process of 3D printed TCP scaffold and improves its mechanical properties, which lays a foundation for its application as a load-bearing bone.

Application and prospects of 3d printing technology in dental manufacturing / 中国组织工程研究

BACKGROUND: In the case of tooth defect or missing, the treatment should be achieved by making a personalized prosthesis. Traditional manufacturing process is time-consuming, costly and accurate. After the introduction of 3D printing technology into dental manufacture, the manufacturing efficiency and quality can be improved to a certain extent. OBJECTIVE: To introduce the application of 3D printing technology in dental manufacture, discuss the bottleneck in recent application, and guide the development of 3D printing technology in dental manufacture. METHODS: The authors used the search times "3D printing, metal implant, dental manufacturing, dental restorations” to search Web of Science, Wanfang, CNKI databases in English and Chinese separately to search papers published during 1980-2019. 261 papers were preliminarily retrieved and 60 of them were included in the final analysis. RESULTS AND CONCLUSION: 3D printing dental mold, digital implant guide plate and wax pattern have been widely used in dental manufacture. 3D printing technology has been widely used in dental manufacture. The most widely used six processes are stereo lithography appearance, laminated object manufacturing, fused deposition modeling, selective laser sintering, selective laser melting, and inkjet printing. There are some technical bottlenecks in the application of 3D printing technology in the field of dental manufacturing. After breaking through technology bottlenecks, 3D printing will be more useful in the field of dental manufacturing in the future.

Preparation and mechanical properties of zirconia-based nano-hydroxyapatite functionally graded material / 中国组织工程研究

BACKGROUND: Studies have shown that the nano-hydroxyapatite coating on the surface of zirconia has not only high strength and toughness, but also good biocompatibility. It is an ideal substitute for hard tissue. However, the coating is easy to fall off from the surface of zirconia, which is a fatal defect. OBJECTIVE: To prepare functionally graded bioceramics with pure zirconia as matrix, gradient layer in the middle and nano-hydroxyapatite on the surface by gradient composite technology and to screen the optimal mechanical properties and sintering temperature. METHODS: Using zirconia and nano hydroxyapatite powder as raw materials, ceramic specimens were prepared by the lamination method in powder metallurgy. According to the thickness of zirconia layer, three groups A (40 mm), B (30 mm) and C (20 mm) were designated. Each group was sub-divided into three subgroups 1 (3 layers), 2 (5 layers) and 3 (7 layers). Thus, there were 162 ceramic specimens in nine subgroups. The ceramic specimens were sintered at different temperatures (1 300,1 350,1 400,1 450,1500, and 1 550°C) and then processed into rectangular specimens for mechanical property testing. RESULTS AND CONCLUSION: The zirconia-based nano-hydroxyapatite functionally graded material can be formed by 10 MPa single side vertical pressure. With the increases in the number of gradient layers and sintering temperature, the mechanical properties of the functionally graded bioceremics in each group were enhanced. The functionally graded bioceramics had the optimal mechanical properties when sintering temperature was 1 550°C, the number of gradient layers was 7, and substrate thickness was 40 mm. The optimal mechanical property of the functionally graded bioceramics produced at above parameter was significantly superior to that produced at other eight sets of parameters (P<0.05). According to the optimal gradient design, the zirconia-based nano-hydroxyapatite functionally graded ceramic specimens prepared by high temperature sintering technique have stronger mechanical properties.

Research status of 3D⁃printed composite PVA bone tissue engineering scaffolds / 口腔疾病防治

@# Three dimensionally printed composite porous bone tissue engineering scaffolds have become a research focus. Composite polyvinyl alcohol (PVA) has good biocompatibilityand degradability, but it cannot be prepared indepen⁃dently because it cannot resist highmechanical resistance. This material shows many advantages, such as good biocom⁃patibility, degradability and mechanical properties, when compounded with other materials with good mechanical proper⁃ties and good biocompatibility. Therefore, 3D printed composite PVA scaffold material can optimize the performance of PVA scaffolds. This article reviews 3D printing bone scaffold technology, polyvinyl alcohol (PVA), and composite PVA scaffolds for in vivo and in vitro bone formation.

Complete denture making in a patient of partial glossectomy using polished surface impression taking and direct metal laser sintering method: A case report / 대한치과보철학회지

For the success of complete denture, three essential requirements such as retention, stability and support are needed. Moreover, due to the absorption of residual ridge and scarring due to the surgery, when making a complete denture, which is difficult to form the mandibular lingual margins, various considerations such as the arrangement of the Non-anatomical dl non-anatomical teeth, the polished surface impression, the internally weighted metal framework and the use of the denture adhesive cream are necessary. In this case report, the patient has a severely resorbed edentulous ridge from severe periodontitis and has some soft tissue problems after the glossectomy due to tongue cancer. To obtain additional retention and stability, some trials such as polished surface impression taking, internally weighted metal insertion and minimal pressure impression were done for the better result. Moreover To make a metal framework that precisely shapes the desired three-dimensional shape and reduces the complicated process, minimal pressure impression method and direct metal laser sintering technique were used.

Influence of heating rate on the flexural strength of monolithic zirconia

PURPOSE: Fabrication of zirconia restorations with ideal mechanical properties in a short period is a great challenge for clinicians. The purpose of the study was to investigate the effect of heating rate on the mechanical and microstructural properties of monolithic zirconia. MATERIALS AND METHODS: Forty monolithic zirconia specimens were prepared from presintered monolithic zirconia blanks. All specimens were then assigned to 4 groups according to heating rate as Control, Group 15℃, Group 20℃, and Group 40℃. All groups were sintered according to heating rates with the sintering temperature of 1500℃, a holding time of 90 minutes and natural cooling. The phase composition was examined by XRD analysis, three-point bending test was conducted to examine the flexural strength, and Weibull analysis was conducted to determine weibull modulus and characteristic strength. Average grain sizes were determined by SEM analysis. One-way ANOVA test was performed at a significance level of 0.05. RESULTS: Only tetragonal phase characteristic peaks were determined on the surface of analyzed specimens. Differences among the average grain sizes of the groups were not statistically significant. The results of the three-point bending test revealed no significant differences among the flexural strength of the groups (P>.05). Weibull modulus of groups was ranging from 3.50 to 4.74. The highest and the lowest characteristic strength values were obtained in Group 20℃ and Control Group, respectively. CONCLUSION: Heating rate has no significant effect on the flexural strength of monolithic zirconia. Monolithic zirconia restorations can be produced in shorter sintering periods without affecting the flexural strength by modifying the heating rate.

Application of 3D printing technology in preparation of scaffolds for periodontal tissue regeneration / 口腔疾病防治

@#How to obtain ideal regeneration of periodontal tissue remains a challenge in the clinical treatment of periodontitis. Three-dimensional printing technology is based on computer-aided design, which produces materials with specific 3D shapes by layer-by-layer superposition, and has been applied to periodontal tissue regeneration therapy, this method offers hope to achieve ideal periodontal regeneration. This article reviews the application of 3D printing technology in the field of periodontal tissue regeneration. The literature review results show that 3D printing technology can design three-dimensional structures using computer software in advance and produce materials with specific three-dimensional structures. 3D printing technology mainly includes selective laser sintering, selective laser melting, extrusion forming printing and 3D bioprinting. At present, the support materials prepared by 3D printing technology include ceramic materials, polymer materials and metals. Submaterials have been extensively studied given their high adjustability, and 3D-printed personalized titanium mesh has been applied in the clinic. Multiphase materials prepared by 3D-printing technology can regenerate periodontal tissue in animal experiments, but the effect is not good in patients with periodontitis. In addition, 3D printing of composite scaffolds for periodontal tissue regeneration need to be further studied.

Effect of conventional and microwave glazing on surface roughness of metal ceramics: An atomic force microscopy analysis

This study investigated and compared the surface roughness achieved by glazing porcelain samples in a conventional and a microwave oven. Materials and Methods: Two commercial brands of metal ceramics were used, VITA VMK MASTER and IPS CLASSIC. Sixty samples were fabricated, 30 for each type of ceramic. The samples were sintered in the conventional oven and hand-polished to remove any irregularities. Samples (n = 10) from each type of ceramic were further divided into three groups as follows: hand-polished (Group A), conventional oven glazed (Group B), and microwave glazed (Group C). Each specimen was evaluated for surface roughness by atomic force microscope. Data were statistically analyzed using two-way analysis of variance (ANOVA) and Tukey's post hoc test (a = 0.05). Results: Two-way ANOVA indicated a highly significant difference in surface roughness based on the type of glazing (P < 0.001), there was a significant difference based on the metal ceramics (P = 0.002). There was also a significant interaction between the type of glazing and metal ceramics (P = 0.009). The images obtained from the atomic force microscope corroborated the measured values. Conclusions: All the results indicate that microwave glazing can be a feasible option for glazing porcelain specimens. It was concluded that surface topography is influenced by surface treatment and microwave glazed ceramic is superior to conventional oven glazed ceramic and hand-polishing showed greater surface roughness when compared to glazing. IPS CLASSIC ceramic showed relatively smooth surface when compared to VITA VMK MASTER irrespective of the surface treatment.

Influence of the microwave sintering period on the 3 point flexural strength and shade of zirconia restoration / 대한치과재료학회지

In this study, we tried to confirm clinically applicable applicability by comparing the difference in 3 point flexural strength and shade of the prosthesis depending on microwave sintering time of dental CAD / CAM zirconia. 3 Point flexural strength specimens (n=30) and shade measurement specimens (n=28) were prepared and sintered at different sintering times. 3 point flexural strength and shade were measured and analyzed by independent t-test (α=0.05). Measurement result of 3 point flexural strength the average of short-term sintering (STS) was 245.47±29.89 MPa, the average of long-term sintering (LTS) was 284.27±31.56 MPa, and there was a statistically significant difference (p 0.05). The 3 point flexural strength of the zirconia restorations fabricated by short time and long time was high in long time sintering. However, other conditions may be required for clinical applications. Since the shade test did not show any significant color difference according to sintering time, it is considered to be sufficient for clinical application.

Selective laser sintering and performances of porous titanium implants / 华西口腔医学杂志

OBJECTIVE@#This work aims to analyze the mechanical properties and biocompatibility of porous titanium (Ti) implants fabricated by selective laser sintering (SLS) and investigate the promotion of osseointegration by porous titanium implant combined with chitosan (CS)/hydroxyapatite(HA) composite coating.@*METHODS@#Ti6Al4V specimens were prepared, and CS/HA composite coating was fabricated on the surface of a portion of the specimens. The mechanical properties of the samples were observed by scanning electron microscope. MC3T3-E1 cells were cultured in vitro, and their biological properties in vitro were analyzed using live and dead viability cell staining method, methyl thiazolyl tetrazolium (MTT) staining, and alkaline phosphatase (ALP) level detection. The thread implant specimens were implanted in the femoral condyle of rabbits, and biological performance was evaluated in vivo.@*RESULTS@#Quasi-elastic gradient of porous specimens decreased with increasing porosity, and the quasi-elastic gradient were close to cortical and cancellous bone when the porosities were 30% and 70%. The specimens showed good biocompatibility. Combined with CS/HA coating, the implants promoted the proliferation and differentiation of MC3T3-E1 cells and facilitated the entry of bone tissue into pores and good osteogenesis.@*CONCLUSIONS@#The porous titanium implant exhibited favorable mechanical properties and biocompatibility. Combined with CS/HA coating, the implant exhibited bone inducibility, which leads to stable osteogenesis.

Implant-supported prosthetic rehabilitation for the edentulous maxilla using the additive manufacturing technology: A case report / 대한치과보철학회지

The direct metal laser sintering (DMLS) technique would be promising for the full-arch implant-supported restorations due to reduced cost and manufacturing time without potential human errors and casting defects. The aims of this case report were to describe the successful outcome of an implant-supported fixed dental prosthesis in the edentulous maxilla by using the DMLS technology and computer-aided design and computer-aided manufacturing (CAD/CAM) monolithic zirconia crowns, and to describe its clinical implications. A healthy 51-year-old Korean woman visited Seoul National University Dental Hospital and she was in need of a rehabilitation of her entire maxilla due to severe tooth mobility. In this case, all maxillary teeth were extracted and an implant-supported fixed dental prosthesis was fabricated that involved a cobalt-chromium (Co-Cr) framework with the DMLS technique and CAD/CAM monolithic zirconia crowns. Six months after delivery, no distinct mechanical and biological complications were detected and the prosthesis exhibited satisfactory esthetics and function. In this case report, with the DMLS system, the three-dimensional printed prosthesis was created without additional manual tooling and thus, reliable accuracy and passive fit were obtained.

What is the changing frequency of diamond burs?

PURPOSE: The purpose of this study was to determine the changing frequency of a diamond bur after multiple usages on 3 different surfaces. MATERIALS AND METHODS: Human premolar teeth (N = 26), disc shaped direct metal laser sintered CoCr (N = 3) and zirconia specimens (N = 3) were used in this study. Groups named basically as Group T for teeth, Group M for CoCr, and Group Z for zirconia. Round tapered black-band diamond bur was used. The specimens were randomly divided into three groups and placed with a special assembly onto the surveyor. 1, 5, and 10 preparation protocols were performed to the first, second, and third sub-groups, respectively. The subgroups were named according to preparation numbers (1, 5, 10). The mentioned bur of each group was then used at another horizontal preparation on a new tooth sample. The same procedure was used for CoCr and zirconia disc specimens. All of the bur surfaces were evaluated using roughness analysis. Then, horizontal tooth preparation surfaces were examined under both stereomicroscope and SEM. The depth maps of tooth surfaces were also obtained from digital stereomicroscopic images. The results were statistically analyzed using One-Way ANOVA, and the Tukey HSD post-hoc tests (α=.05). RESULTS: All of the groups were significantly different from the control group (P < .001). There was no significant difference between groups Z5 and Z10 (P=.928). Significant differences were found among groups T5, M5, and Z5 (P < .001). CONCLUSION: Diamond burs wear after multiple use and they should be changed after 5 teeth preparations at most. A diamond bur should not be used for teeth preparation after try-in procedures of metal or zirconia substructures.

Metal-ceramic bond strength between a feldspathic porcelain and a Co-Cr alloy fabricated with Direct Metal Laser Sintering technique

PURPOSE: The aim of the present study was to record the metal-ceramic bond strength of a feldspathic dental porcelain and a Co-Cr alloy, using the Direct Metal Laser Sintering technique (DMLS) for the fabrication of metal substrates. MATERIALS AND METHODS: Ten metal substrates were fabricated with powder of a dental Co-Cr alloy using DMLS technique (test group) in dimensions according to ISO 9693. Another ten substrates were fabricated with a casing dental Co-Cr alloy using classic casting technique (control group) for comparison. Another three substrates were fabricated using each technique to record the Modulus of Elasticity (E) of the used alloys. All substrates were examined to record external and internal porosity. Feldspathic porcelain was applied on the substrates. Specimens were tested using the three-point bending test. The failure mode was determined using optical and scanning electron microscopy. The statistical analysis was performed using t-test. RESULTS: Substrates prepared using DMLS technique did not show internal porosity as compared to those produced using the casting technique. The E of control and test group was 222 ± 5.13 GPa and 227 ± 3 GPa, respectively. The bond strength was 51.87 ± 7.50 MPa for test group and 54.60 ± 6.20 MPa for control group. No statistically significant differences between the two groups were recorded. The mode of failure was mainly cohesive for all specimens. CONCLUSION: Specimens produced by the DMLS technique cover the lowest acceptable metal-ceramic bond strength of 25 MPa specified in ISO 9693 and present satisfactory bond strength for clinical use.

Crystal Modification on Lithium Disilicate Glass Ceramics Sintered Using Microwaves / Modificación de Cristales de Cerémicas de Vidrio de Disilicato de Litio Sinterizadas con Microondas

ABSTRACT: Microwaves are an interesting alternative to process dental ceramics. It is well documented that Microwave Hybrid Sintering (MHS) allows important savings in time and energy consumption. However, little is known about its effect on lithium disilicate glass ceramics, a popular material in dentistry today. We analyzed the microstructure of lithium disilicate glass ceramics sintered with MHS compared with conventional sintering. We sintered lithium disilicate glass ceramics using MHS and conventional furnaces, and we analyzed the samples using X-Ray diffraction and SEM. Samples sintered with MHS showed an increased crystalline phase, with an increased number of crystals. These crystals have larger perimeters compared with samples sintered in conventional furnaces. MHS produced a different crystallization pattern and crystal/ matrix ration in lithium disilicate glass ceramics when compared to conventional sintering. This can be associated with the improved mechanical properties of these materials reported previously.

RESUMEN: Las microondas son una interesante alternativa para procesar cerámicas dentales. Está bien documentado que el Sinterizado Híbrido por Microondas (MHS) permite ahorros importantes de tiempo y energía. Sin embargo, poco se ha publicado respecto a sus efectos en cerámicas de disilicato de litio, un material bastante popular en odontología en estos días. En este artículo analizamos la micro estructura de cerámicas de disilicato de litio sinterizada con MHS comparada con el sinterizado convencional. Sinterizamos muestras de cerámicas de disilicato de litio usando MHS y hornos convencionales, y analizamos las muestras usando difracción de rayos X y SEM. Las muestras sintetizadas usando MHS tienen una mayor fase cristalina, con mayor número de cristales. Estos cristales tienen además perímetros mayores, comparados con las muestras sinterizadas en hornos convencionales. MHS produce patrones de cristalización y proporción de cristal/matrix diferentes a las producidos por sinterizado convencional. Esto puede asociarse a las mejoras en propiedades mecánicas reportadas previamente.

A Novel Porous Diamond - Titanium Biomaterial: Structure, Microstructure, Physico-Mechanical Properties and Biocompatibility

ABSTRACT With the aim of introducing permanent prostheses with main properties equivalent to cortical human bone, Ti-diamond composites were processed through powder metallurgy. Grade 1 titanium and mixtures of Ti powder with 2%, 5% and 10 wt% diamond were compacted at 100MPa, and then sintered at 1250°C/2hr/10-6mbar. Sintered samples were studied in the point of view of their microstructures, structures, yield strength and elastic modulus. The results showed that the best addition of diamonds was 2 wt%, which led to a uniform porosity, yield strength of 370MPa and elastic modulus of 13.9 GPa. Samples of Ti and Ti-2% diamond were subjected to in vitro cytotoxicity test, using cultures of VERO cells, and it resulted in a biocompatible and nontoxic composite material.

Solid Freeform Techniques Application in Bone Tissue Engineering for Scaffold Fabrication

Solid freeform techniques are revolutionising technology with great potential to fabricate highly organized biodegradable scaffolds for damaged tissues and organs. Scaffolds fabricated via Solid freeform (SFF) techniques have more pronounced effect in bone tissue engineering. SFF techniques produce various types of scaffolds from different biomaterials with specific pore size, geometries, orientation, interconnectivity and anatomical shapes. Scaffolds needs to be designed from such biomaterials which can attach directly to natural tissues and mimic its properties, so ideally mechanical properties of scaffolds should be same as that of regenerating tissues for best results. The scaffolds designed without optimized mechanical properties would lead to the reduced nutrition diffusion within tissue engineered constructs (TECs) causing tissue necrosis. These scaffolds are mainly processed from ceramics and polymers like calcium phosphate, polydioxane, €-polycaprolactone, polylactic and polyglycolic acids etc. While, hydrogel scaffolds provide bridge for encapsulated cells and tissues to integrate with natural ECM. Likewise, 2D images from radiography were not sufficient for the prediction of the brain structure, cranial nerves, vessel and architecture of base of the skull and bones, which became possible using the 3D prototyping technologies. Any misrepresentation can lead to fatal outcomes. Biomodelling from these techniques for spinal surgery and preoperative planning are making its way toward successful treatment of several spinal deformities and spinal tumor. In this review we explored laser based and printing SFF techniques following its methodologies, principles and most recent areas of application with its achievements and possible challenges faced during its applications.

Study on friction and wear properties of dental zirconia ceramics processed by microwave and conventional sintering methods / 华西口腔医学杂志

<p><b>OBJECTIVE</b>This study evaluated the wear of an antagonist and friction and wear properties of dental zirconia ceramic that was subjected to microwave and conventional sintering methods.</p><p><b>METHODS</b>Ten specimens were fabricated from Lava brand zirconia and randomly assigned to microwave and conventional sintering groups. A profile tester for surface roughness was used to measure roughness of the specimens. Wear test was performed, and steatite ceramic was used as antagonist. Friction coefficient curves were recorded, and wear volume were calculated. Finally, optical microscope was used to observe the surface morphology of zirconia and steatite ceramics. Field emission scanning electron microscopy was used to observe the microstructure of zirconia.</p><p><b>RESULTS</b>Wear volumes of microwave and conventionally sintered zirconia were (6.940±1.382)×10⁻², (7.952±1.815) ×10⁻² mm³, respectively. Moreover, wear volumes of antagonist after sintering by the considered methods were (14.189±4.745)×10⁻², (15.813±3.481)×10⁻² mm³, correspondingly. Statistically significant difference was not observed in the wear resistance of zirconia and wear volume of steatite ceramic upon exposure to two kinds of sintering methods. Optical microscopy showed that ploughed surfaces were apparent in zirconia. The wear surface of steatite ceramic against had craze, accompanied by plough. Scanning electron microscopy showed that zirconia was sintered compactly when subjected to both conventional sintering and microwave methods, whereas grains of zirconia sintered by microwave alone were smaller and more uniform.</p><p><b>CONCLUSIONS</b>Two kinds of sintering methods are successfully used to produce dental zirconia ceramics with similar friction and wear properties.
.</p>