Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 10 de 10
Filter
Add filters








Year range
1.
Eng. sanit. ambient ; 26(3): 567-576, maio-jun. 2021. tab, graf
Article in Portuguese | LILACS-Express | LILACS | ID: biblio-1286318

ABSTRACT

RESUMO A suinocultura é caracterizada pela produção de grande volume de dejetos, que quando dispostos inadequadamente provocam impactos nos recursos hídricos, no solo e no ar, além de promoverem riscos à saúde humana. A remoção conjunta de matéria orgânica e nutrientes tem se mostrado um desafio para o tratamento desse tipo de resíduo. Diante disso, o presente estudo avaliou a remoção simultânea de matéria carbonácea, nitrogênio e fósforo presentes em dejetos de suinocultura, em um sistema de tratamento biológico composto de um reator anaeróbio de fluxo ascendente e manta de lodo (UASB), seguido de um reator em batelada sequencial (RBS) operado em ciclos aeróbio/anóxico de 24 h. O sistema foi dividido em duas etapas operacionais: coluna de sedimentação, UASB e RBS, e UASB e RBS. O reator UASB, com tempo de detenção hidráulica de 15,5 h e carga orgânica volumétrica aplicada de 5,5 kg DQO.m-3.d-1, alcançou eficiência média de remoção de demanda química de oxigênio (DQO) de 84% na primeira etapa. Na Etapa 1, ocorreu o melhor desempenho do sistema, com eficiências médias globais de remoção de DQO, nitrogênio total e fósforo iguais a 78, 85 e 67%, respectivamente.


ABSTRACT Swine farming is characterized by the production of a large volume of manure, which when improperly disposed causes impacts on water resources, soil, and air, in addition to promoting risks to human health. The joint removal of organic matter and nutrients from this type of waste has been a challenge. Therefore, the present study evaluated the simultaneous removal of carbonaceous matter, nitrogen, and phosphorus from swine wastewater in a biological treatment system composed of an upflow anaerobic sludge blanket reactor (UASB), followed by a sequential batch reactor (SBR) operated in 24 hours aerobic/anoxic cycles. The system was divided into two operational phases: Sedimentation Column, UASB and SBR, and UASB and SBR. The UASB reactor, with hydraulic retention time of 15.5 h and applied organic volumetric load of 5.5 kg COD.m-3.d-1, achieved an average COD removal efficiency of 84% in the first stage. Stage 1 presented the best performance, with global average removal efficiencies of 78, 85, and 67% for COD, total nitrogen, and phosphorus, respectively.

2.
Eng. sanit. ambient ; 25(2): 259-269, mar.-abr. 2020. tab, graf
Article in Portuguese | LILACS-Express | LILACS | ID: biblio-1098205

ABSTRACT

RESUMO Sistemas anaeróbios modernos de tratamento de esgoto doméstico, embora bastante eficientes na remoção de matéria orgânica e sólidos em suspensão, não produzem um efluente com qualidade compatível com os padrões legais para descarga em corpos d'água. Por essa razão, esses sistemas têm de ser associados a unidades de pós-tratamento. Este trabalho trata de uma investigação experimental sobre a viabilidade de aplicação do sistema de lodo ativado como uma alternativa do pós-tratamento, especificamente para o caso em que se prevê o efluente final para fertirrigação. Na investigação experimental, utilizou-se um reator de bateladas sequenciais (RBS), em escala laboratorial, como unidade de pós-tratamento. Os resultados experimentais mostraram que o comportamento do sistema RBS pode ser descrito como o modelo geral de lodo ativado da Associação Internacional da Água (IWA, na sigla em inglês), que resulta na definição dos aspectos fundamentais: qualidade do efluente final, consumo de oxigênio e produção de lodo. Na otimização do reator RBS, desenvolveu-se um modelo que permite estabelecer o tempo de permanência mínimo para o pós-tratamento em função de dois parâmetros básicos: a constante de utilização de material orgânico biodegradável pelas bactérias heterotróficas do lodo gerado no sistema de pós tratamento e a sedimentabilidade desse lodo. A constante de utilização de material orgânico foi determinada por testes respirométricos. O lodo gerado no sistema de pós-tratamento surpreendentemente mostrou ter uma sedimentabilidade bem superior àquela normalmente encontrada em sistemas de lodo ativado tratando esgoto bruto, o que constitui um argumento sólido para a aplicação do sistema RBS na prática de pós-tratamento do efluente do reator upflow anaerobic slugde blanket (UASB).


ABSTRACT Modern anaerobic systems for domestic sewage treatment, although very effective in removing organic matter and suspended solids, do not produce a quality effluent that complies with the legal standards for discharge into water bodies. Therefore, such systems have to be associated with post treatment units. This paper deals with an experimental investigation into the feasibility of applying the activated sludge system as an alternative post-treatment, specifically for the case where reuse of the final wastewater for fertigation is expected. In the experimental investigation, a pilot-scale sequencing batch reactor (SBR), in laboratory scale, was used as a post-treatment unit. The experimental results showed that the behavior of the RBS system can be described with the general IWA model for activated sludge, resulting in the definition of the fundamental aspects: quality of the final effluent, oxygen consumption, and sludge production. In the optimization of the RBS reactor, a model was developed to establish the minimum retention time for the post-treatment in terms of two basic parameters: the biodegradable organic material utilization constant by heterotrophic bacteria sludge of the post-treatment system and the sedimentability of this sludge. The organic material utilization constant was determined by respirometry testing. The sludge generated in the post-treatment system surprisingly been shown to have a much higher sedimentability than that normally found in activated sludge systems dealing with raw sewage, which is a sound argument for applying the RBS system in the practice of post-treatment reactor effluent UASB

3.
Eng. sanit. ambient ; 24(4): 667-673, jul.-ago. 2019. tab, graf
Article in English | LILACS-Express | LILACS | ID: biblio-1039784

ABSTRACT

ABSTRACT The present paper aimed to evaluate the impact of microaeration on both the removal performance of some emerging micropollutants (pharmaceuticals, hormones, and bisphenol A) and the microbial community structure of an anaerobic reactor treating synthetic wastewater. Under anaerobic conditions, the removal efficiencies of the micropollutants were very low (< 10%). However, the microaeration (1.0 mL air·min-1 at 27 °C and 1 atm, equivalent to a QAIR/QINF ratio of 0.1) expressively improved the removal efficiencies of all compounds (> 50%). Therefore, supplementing anaerobic reactors with low amounts of oxygen seems to be an interesting strategy to enhance the removal of the micropollutants tested. However, further studies should be carried out with other compounds in order to evaluate the wide applicability of microaeration to different classes of micropollutants in lab- and full-scale treatment systems. Concerning the microbiota structure, both bacterial and archaeal communities were not compromised by the different operational conditions and preserved their functional organization with high richness during the whole experiment.


RESUMO O presente trabalho teve como objetivo avaliar o impacto da microaeração tanto no desempenho de remoção de alguns micropoluentes emergentes (fármacos, hormônios e bisfenol A) quanto na estrutura da comunidade microbiana de um reator anaeróbio tratando uma água residuária sintética. Sob condições anaeróbias, as eficiências de remoção dos micropoluentes foram muito baixas (< 10%). Entretanto, a microaeração (1,0 mL de ar·min-1 a 27 °C e 1 atm, equivalente a uma relação QAR/QAF de 0,1) melhorou expressivamente as eficiências de remoção de todos os compostos (> 50%). Portanto, a suplementação de reatores anaeróbios com baixas quantidades de oxigênio parece ser uma estratégia interessante para melhorar a remoção dos micropoluentes testados. Entretanto, mais estudos devem ser realizados com outros compostos para avaliar a ampla aplicabilidade da microaeração a diferentes classes de micropoluentes em sistemas de tratamento em escala laboratorial e real. Com relação à estrutura da microbiota, tanto as comunidades de bactérias quanto as de arqueias não foram comprometidas pelas diferentes condições operacionais e preservaram sua organização funcional com elevada riqueza durante todo o experimento.

4.
Eng. sanit. ambient ; 15(4): 357-366, out.-dez. 2010. ilus, graf, tab
Article in Portuguese | LILACS | ID: lil-578701

ABSTRACT

O objetivo deste trabalho foi caracterizar os efluentes gerados em cabines de pintura de uma indústria moveleira e avaliar a eficiência de sistemas biológicos (anaeróbio e aeróbio) para o seu tratamento. O efluente industrial apresentou elevado teor de matéria orgânica (DQO total de 634 a 2.790 mg.L-1; DBO5 total de 360 a 972 mg.L-1) e baixos teores de macronutrientes (NTK de 1,9 mg.L-1 e Ptotal de 0,5 mg.L-) e metais tóxicos. Os ensaios de tratabilidade em reator UASB (~25ºC e tempo de detenção hidráulica - TDH = 10 horas), indicaram uma eficiência máxima de remoção de matéria orgânica de 90 por cento na composição volumétrica 70:30 (efluente industrial:esgoto sanitário). A alimentação do reator UASB só com efluente industrial resultou em acúmulo de ácidos graxos voláteis e inibição microbiana, mas o uso de pós-tratamento aeróbio (TDH = 96h) garantiu elevada eficiência global (~88 por cento) de remoção de matéria orgânica.


The main objective of this work was to characterize the wastewater from the dying hood of a woven furniture industry, and to assess the efficiency of biological processes (anaerobic and aerobic) for its treatment. The physical-chemical characterization of the industrial wastewater showed a high organic matter content (total COD from 634 to 2,790 mg.L-1; total BOD5 from 360 to 972 mg.L-1), low content of macronutrients (NTK of 1.9 mg.L-1 and P of 0.5 mg.L-1) and toxic metals. The anaerobic degradation tests in a bench-scale UASB reactor (25ºC and hydraulic retention time - HRT = 10 hours) showed that a maximum removal efficiency of 90 percent was obtained when the reactor was fed with 30 percent raw sewage and 70 percent industrial wastewater. The feeding of UASB reactor with only industrial wastewater resulted in volatile fatty acids accumulation and microbial inhibition; however, the use of aerobic post-treatment (HRT = 96 hours) granted a high (~88 percent) organic matter removal efficiency.

5.
Ciênc. agrotec., (Impr.) ; 34(2): 475-484, mar.-abr. 2010. ilus, tab
Article in Portuguese | LILACS | ID: lil-546677

ABSTRACT

A água residuária do café (ARC), originada no processamento dos frutos do cafeeiro, produz quantidade considerável de biogás que pode e deve ser utilizado como fonte de energia alternativa e complementar. Neste trabalho, foi estudada a variação da concentração de metano do biogás produzido a partir das ARC, por tratamento anaeróbio, em reator UASB, em escala laboratorial. As amostras foram coletadas durante 86 dias. As análises da concentração de metano foram realizadas por cromatografia gás-sólido (CGS). A produção de biogás e de metano, foi de 0,545 a 0,602 m³ kg-1DQO removida e de 0,382 a 0,421 m³ kg-1 DQO removida, respectivamente. Os resultados da concentração de metano no biogás variaram de 48,60 a 68,14 por cento, influenciados pela variação dos parâmetros temperatura, pH, acidez e compostos fenólicos presentes nas ARC. Como havia sido previsto, as maiores concentrações de metano foram verificadas nos períodos em que o pH estava mais próximo da neutralidade.


The wastewater produced from wet coffee processing (WCP), originated from the coffee fruits, can produce great quantities of biogas, which, in turn, can be also used as an alternative or complementary energy source. In this research, we studied the variation of methane concentration produced by WCP in a laboratory-scale UASB reactor with anaerobic treatment. The samples were collected during a period of 86 days. The methane concentration was measured through gas solid chromatography (GSC). The production of biogas and methane ranged from 0.545 to 0.602 m³ kg-1DQO removed and from 0.382 a 0.421 m³ kg-1 DQO removed, respectively. Methane presence in the biogas ranged from 48.60 percent to 68.14 percent. This variation was influenced by the following parameters: temperature, pH, acidity, and phenol compounds present in the WCP. As expected, greater concentrations of methane gas were verified during the periods when the pH close to neutral.

6.
Eng. sanit. ambient ; 14(4): 559-568, out.-dez. 2009. tab, ilus
Article in Portuguese | LILACS | ID: lil-537662

ABSTRACT

O trabalho investigou a influência do uso do extrato de levedura, fonte dos mediadores redox riboflavina e nicotinamida, na remoção de cor de solução de corante azo Drimaren Azul HF-RL em condições anaeróbias. O trabalho envolveu a execução de ensaios em batelada, em frascos-reatores mantidos a 25 ºC, incubados com o azo-corante e lodo anaeróbio na presença e ausência de fontes de carbono (extrato de levedura ou glicose) e de mediadores redox (riboflavina ou extrato de levedura). O monitoramento da variação temporal de cor, a demanda química de oxigênio (DQO) e ácidos graxos voláteis (AGV) mostraram que a adição de extrato de levedura (0,5 g/L) resultou em eficiências de remoção de cor de 80 a 85 por cento nas primeiras 24 horas de incubação, e que os produtos da degradação do azo-corante foram tóxicos para todo o consórcio anaeróbio, o que resultou em baixas eficiências de remoção de DQO na presença e ausência do extrato de levedura. Os resultados indicaram, ainda, que as eficiências de remoção de cor foram inferiores a 30 por cento na presença de apenas glicose (fonte de carbono) ou riboflavina (mediador redox), indicando que o extrato de levedura atuou simultaneamente como fonte de carbono e de mediadores redox.


This paper investigated the influence of using yeast extract, which is the source of redox mediators riboflavin and nicotinamide, in the decolorization of solutions containing the azo dye Drimaren Blue HF-RL in anaerobic conditions. It involved the incubation of serum bottles kept at 25 ºC and inoculated with the azo-dye, and anaerobic sludge in the presence and absence of carbon source (glucose or yeast extract) and redox mediators (riboflavin and yeast extract). The monitoring of color, chemical oxygen demand (COD) and volatile fatty acids (VFA) showed that the addition of yeast extract (0.5 g/L) resulted in 80 to 85 percent color removal in the first 24 hours of incubation; and that the metabolites of dye degradation were toxic to the anaerobic microorganisms, which led to low COD removal efficiencies either in the presence or absence of yeast extract. The results also showed that the efficiencies of color removal were below 30 percent in the presence of only glucose or riboflavin, indicating that the yeast extract acted simultaneously as source of carbon and redox mediators.

7.
Eng. sanit. ambient ; 14(2): 275-284, abr.-jun. 2009. ilus, graf, tab
Article in Portuguese | LILACS | ID: lil-520312

ABSTRACT

A presente investigação teve como objetivo estudar o efeito do nitrato na descoloração de corantes em reatores anaeróbios suplementados ou não com mediadores redox. Dois reatores anaeróbios em paralelo foram operados com tempo de detenção hidráulica (TDH) de dez horas, utilizando-se etanol como cossubstrato. Os resultados provaram que os reatores eram eficientes na remoção de cor, sendo o composto etanol um eficiente doador de elétrons para sustentar a redução do corante azo nos reatores mesofílicos. O mediador redox AQDS aumentou as taxas de redução do corante azo, mas o seu efeito não foi tão marcante comparado aos experimentos realizados anteriormente. Contrariamente às hipóteses levantadas de que a adição de nitrato poderia interferir nas taxas de remoção de cor e propriedades catalíticas do mediador redox, não se verificou nenhum efeito desse composto.


This paper aimed at evaluating the effect of nitrate on anaerobic azo dye reduction by using mesophilic bioreactors, in the absence and in the presence of redox mediators. Two anaerobic bioreactors were operated in parallel with a hydraulic retention time (HRT) of ten hours; ethanol was used as co-substrate. The results showed that the bioreactors were efficient on dye reduction, and the ethanol showed to be a good electron donor to sustain it. The redox mediator AQDS increased the rates of reductive decolourisation, but its effect was not so remarkable compared to the previous experiments conducted. Contrary to the raised hypothesis that nitrate addition could decrease the colour removal efficiency and catalytic properties of the redox mediators, no effect of nitrate was observed in the bioreactors.

8.
Eng. sanit. ambient ; 13(2): 181-188, abr.-jun. 2008. ilus, graf, tab
Article in Portuguese | LILACS | ID: lil-486654

ABSTRACT

Este artigo relata a avaliação do desempenho de um reator anaeróbio-aeróbio, preenchido com espuma de poliuretano, para tratamento de esgoto sanitário. Inicialmente, foram testados diferentes tempos de detenção hidráulica (TDH) no reator que operou apenas em condições anaeróbias. Em seguida, foi operado o reator combinado anaeróbio-aeróbio. O melhor resultado para o reator em operação exclusivamente anaeróbia foi para o TDH de 10 horas, no qual se conseguiu reduzir a DQO de 389 ± 70 mg/L para 137 ± 16 mg/L. Para o reator anaeróbio-aeróbio, a DQO foi reduzida de 259 ± 69 mg/L para 93 ± 31 mg/L para TDH de 12 h (6 h no estágio anaeróbio e 6 h no aeróbio). A comparação de todos os resultados obtidos evidenciou a importância do pós-tratamento aeróbio na remoção de parcela de matéria orgânica não removida em tratamento unicamente anaeróbio.


This paper reports on the performance evaluation of an upflow anaerobic-aerobic reactor, filled with polyurethane matrices, for domestic sewage treatment. Initially, different hydraulic retention times were assayed with the reactor operating exclusively in anaerobic condition. Afterwards, anaerobic-aerobic combined reactor was operated. The anaerobic operation with HRT of 10 h provided the best organic matter removal with COD reduction from 389 ± 70 mg/L to 137 ± 16 mg/L. Under anaerobic-aerobic condition, the COD dropped from 259 ± 69 mg/L to 93 ± 31 mg/L with HRT of 12 h (6 h in anaerobic and 6 h in aerobic stages). Finally, comparing all the obtained results, it was possible to verify the importance of the aerobic post treatment in the removal of part of the organic matter not removed in an exclusively anaerobic treatment.

9.
Ciênc. agrotec., (Impr.) ; 32(3): 938-947, maio-jun. 2008. ilus, graf, tab
Article in Portuguese | LILACS | ID: lil-487967

ABSTRACT

Estudou-se a produção de biogás proveniente do tratamento das águas residuárias do processamento por via úmida do café (ARC) coco em sistema de tratamento anaeróbio em escala laboratorial. O sistema foi composto de um tanque de acidificação e equalização (TAE), um reator anaeróbio de manta de lodo e fluxo ascendente (UASB), uma lagoa aerada facultativa (LAF), um equalizador de pressão e um gasômetro. O tratamento foi realizado durante 190 dias e o pH foi controlado por certos períodos de tempo, pela adição de NaOH no TAE ou no reator UASB. No reator UASB, os valores máximos e mínimos obtidos na entrada foram de 235 a 7.064 mg.L-1 para DQO; 200 a 3.913 mg.L-1 para DBO5, 500 a 11.153 mg.L-1 para STV e 4,57 a 7,75 para o pH. Na saída do reator UASB, os valores foram de 39 a 2.333 mg.L-1 para DQO; 15 a 1.300 mg.L-1 para DBO5, 272 a 2.749 mg.L-1 para STV e 6,16 a 7,93 para o pH. Os valores mínimos e máximos de vazão afluente foram de 0,18 a 1,56 L.h-1. O biogás apresentou uma produção teórica de 0,545 a de 0,602 m³.kg-1DBO5 e porcentagem de metano de 48,60 a 68,14 por cento.


It was studied the biogas production through the treatment of the wet processing coffee wastewaters (ARC) in an anaerobic treatment system in laboratorial scale. The system used was composed by one acidification and equalization tank (TAE), one anaerobic upflow sludge blanket reactor (UASB), one facultative aerated pond, one equalization tank and one gas tank. The treatment was carried out for 190 days and the pH was controlled for some periods by adding NaOH inside of the TAE or in the UASB. In the UASB reactor the maximum and minimum values obtained in the inlet were 235 to 7064 mg.L-1 for COD; 200 to 3913 mg.L-1 for BOD5, 500 to 11.153 mg.L-1 for TVS and 4,57 to 7,75 for pH. In the outlet of the UASB, the values were 39 to 2333 mg.L-1 for COD; 15 to 1300 mg.L-1 for BOD5, 272 to 2749 mg.L-1 for TVS and 6,16 to 7,93 for pH. The minimum and maximum values of the inlet flow were 0,18 to 1,56 L.h-1. The biogas presented a theoretical production of the 0,545 to 0,602 m³.Kg-1BOD5 and methane percentage from 48,60 to 68,14 percent.

10.
Eng. sanit. ambient ; 13(1): 15-22, jan.-mar. 2008. ilus, graf, tab
Article in Portuguese | LILACS | ID: lil-485065

ABSTRACT

Avaliou-se o potencial de uso reator anaeróbio operado em bateladas seqüenciais com biomassa imobilizada (ASBBR), em escala piloto, no tratamento de água residuária industrial contendo elevadas concentrações de sulfato. O ASBBR, com volume total de 1.2 m³, foi preenchido com carvão mineral como meio suporte para imobilização da biomassa (leito fixo). Foram aplicadas cargas de 0,15; 0,30; 0,65; 1,30 e 1,90 kg SO4-2/ciclo (ou batelada) com duração de 48 h, correspondendo, respectivamente, às concentrações de sulfato no afluente de 0,25; 0,50; 1,0; 2,0 e 3,0 gSO4-2.l-1. Utilizou-se etanol como doador de elétrons para a redução do sulfato. O reator foi operado à temperatura ambiente (29±8ºC), tendo sido obtidas eficiências médias na redução de sulfato entre 88 e 92 por cento em 92 ciclos (275 dias). Os resultados obtidos permitem concluir que o uso de reatores ASBBR constitui-se em alternativa eficiente para a remoção de sulfatos de águas residuárias com características semelhantes às utilizadas neste trabalho.


The potential use of an anaerobic sequencing batch biofilm reactor (ASBBR) in pilot-scale for the treatment of a sulfate-rich industrial wastewater was evaluated. The pilot 1.2 m³ ASBBR reactor was filled with mineral coal for biomass immobilization (fixed film). The sulfate loading rates applied were 0.15; 0.30; 0.65; 1.30 and 1.90 kg SO4-2/cycle (or batch). Each cycle lasted 48 h. The influent concentrations were, respectively, 0.25; 0.50; 1.0; 2.0 and 3.0 gSO4-2.l-1. Ethanol was used as electron donor for sulfate reduction. The reactor operated at ambient temperature (29±8ºC), and the mean efficiencies of sulfate removal were in the range 88 to 92 percent in the 92 run cycles. The total operating period comprised 275 days. Based on the results obtained in this research, it could be concluded that the ASBBR can be an efficient alternative for the removal of sulfate from other industrial wastewaters with similar characteristics.


Subject(s)
Anaerobic Treatment , Biological Filters , Bioreactors , Coal , Ethanol , Industrial Waste , Sulfates
SELECTION OF CITATIONS
SEARCH DETAIL