Optimization of water extraction technology of Xiangqin jiere granules by orthogonal design based on G1-entropy weight compared with BP neural network / 中国药房

OBJECTIVE Optimizing the water extraction technology of Xiangqin jiere granules. METHODS The orthogonal test of 3 factors and 3 levels was designed， and comprehensive scoring was conducted for the above indexes by using G1-entropy weight to obtain the optimized water extraction technology of Xiangqin jiere granules with water addition ratio， extraction time and extraction times as factors， using the contents of forsythoside A， baicalin， phillyrin， oroxylin A-7-O-β-D-glycoside， wogonoside， baicalein and wogonin， and extraction rate as evaluation indexes. BP neural network modeling was used to optimize the network model and water extraction process using the results of 9 groups of orthogonal tests as test and training data， the water addition multiple， decocting time and extraction times as input nodes， and the comprehensive score as output nodes. Then the two analysis methods were compared by verification test to find the best water extraction process parameters. RESULTS The water extraction technology optimized by the orthogonal test was 8-fold water， extracting 3 times， extracting for 1 h each time. Comprehensive score was 96.84 （RSD＝0.90%）. The optimal water extraction technology obtained by BP neural network modeling included 12-fold water， extracting 4 times， extracting for 0.5 h each time. The comprehensive score was 92.72 （RSD＝0.77%）， which was slightly lower than that of the orthogonal test. CONCLUSIONS The water extraction technology of Xiangqin jiere granules is optimized successfully in the study， which includes adding 8-fold water， extracting 3 times， and extracting for 1 hour each time.

Optimization of water extraction process of Maxing kechuan granules / 中国药房

OBJECTIVE To optimize the water extraction process of Maxing kechuan granules. METHODS With the contents of ephedrine hydrochloride， bergenin， prim-O-glucosylcimifugin， 5-O-methylvisamin， naringin and hesperidin and the rate of extraction as the evaluation indexes， the weight was determined by the analytic hierarchy process（APH）-entropy weight method， and the comprehensive score was calculated as the response value. Based on the single-factor test， the Box-Behnken response surface method was used to investigate the factors， and the best water extraction process of Maxing kechuan granules was optimized； process validation was also carried out. RESULTS The best water extraction process of Maxing kechuan granules optimized was as follows： soaking for 40 minutes， adding 8 times water， and extracting for 180 minutes. After three validation tests， the comprehensive score was 94.82 （RSD＝0.96%， n＝3）， which had a small difference from the predicted value of 94.64. CONCLUSIONS The water extraction process of Maxing kechuan granules is stable and reliable， which can provide a reference for the development of the preparation.

Optimization of the Water Extraction and Ethanol Pricipitation Technology of Zhuang Medicine Baijin Granules by Pharmacodynamics Combined with Orthogonal Test / 中国药房

OBJECTIVE：To optimize the water extraction and ethanol precipitation technology of Zhuang medicine Baijin granules. METHODS ：HPLC method was adopted to determine the content of bergenin in Baijin granules extract. The extraction routes of Baijin granules （water decoction ，70％ ethanol reflux extraction ，water decoction combined with 70％ ethanol reflux extraction）was screened primarily with the yield of extract and the experiment of reducing uric acid of mice. The orthogonal test was adopted to optimize water extraction technology of Baijin granules with water multiple ，extraction time and extraction times as factors，taking the extraction yield and the bergenin content as index ，then the validation test was carried out. The orthogonal test was adopted to optimize the alcohol precipitation process of Baijin granules including the relative density of medicinal materials ， alcohol content and the alcohol precipitation time ，then the validation test was carried out. By the experiment of reducing uric acid ， the effects of medicinal materials extract of Baijin granules extract were compared before and after ethanol precipitation. RESLUTS：Established method for content determination of bergenin with linearity range of 0.007 2-0.288 mg/mL，had good precision，reproducibility，stability and accuracy. The initially chosen extraction process of Baijin granules was water decoction extraction. The optimal water extraction technology was soaked for 0.5 h，then decocted for 3 times with 14-fold water （mL/g）and 1.0 h each time. The optimal ethanol precipitation process was to concentrate the water extract to a relative density of 1.0 g/mL with alcohol content of liquid at 60％ and precipitated for 12 h. Validation tests showed that RSDs of extract yield and beragenin content were all lower than 2％（n＝3）. The experiment of pharmacodynamics showed that water extract （before ethanol precipitation ）and water extract after alcohol precipitation could significantly decrease the level of uric acid in hyperuricemia model mice （P＜0.01）. There was no statistical significance in the reduction of uric acid between 2 groups（P＞0.05）. CONCLUSIONS ：The optimized water extraction technology can obtain good extract yield and bergenin content ，and combined with ethanol precipitation technology for removing excess impurities would not affect the pharmacodynamics. The water extraction and ethanol precipitation technology is feasible，and can be used for extracting the medicinal materials of Baijin granules and its edulcoration.

Critical process parameter identification of manufacturing processes of Astragali Radix extract with a weighted determination coefficient method / 中草药·英文版

Objective: Critical process parameters (CPPs) identification is an important step of the implementation of quality by design (QbD) concept. There are many CPP identification methods, such as risk analysis method, sensitivity analysis method, multiple linear regression method, standard partial regression coefficient (SPRC) method, and so on. The SPRC method can consider multiple process critical quality attributes (CQAs) simultaneously, but the determination of CPP number is subjective. Therefore, new CPP identification method is still required. Methods: The manufacturing process of Astragali Radix extract, which contained water reflux extraction, concentration, and ethanol precipitation, was used as an example. First, the multiple process CQAs were determined to be the yield of pigment, dry matter, sugars, and active ingredients. Second, the potential CPPs were determined by a knowledge organization method. Plackett-Burman designed experiments were then performed. A weighted determination coefficient (Rw2) method was presented to identify CPPs. In this method, the importance of different CQAs was considered. Process parameters were removed one-by-one according to their importance index. The decrease in Rw2 was used to characterize the importance of the removed parameter. If the decrease of Rw2 was less than a preset threshold, the removed parameter was not a CPP. Results: During the manufacturing process of Astragali Radix extract, the potential CPPs determined by the knowledge organization method were water consumption, reflux extraction time, extraction frequency, ethanol content, ethanol consumption, and concentration endpoint. Reflux extraction time, the first ethanol consumption, the second ethanol consumption, and the second ethanol precipitation refrigeration temperature were found to be CPPs using the weighted determination coefficient method with the threshold of 10%. Conclusion: Using the weighted determination coefficient method, CPPs can be determined with all the CQAs considered based on their importance. The determination of CPP number is more objective compared with the SPRC method.

Study on Optimization of Water Extraction-ethanol Precipitation Technology of Polysaccharide from Litchi chi- nensis Seed and Its Inhibitory Activity to α-glucosidase / 中国药房

OBJECTIVE：To optim ize the water extraction-ethanol precipitation technology of polysaccharide from Litchi chinensis seed，and to evaluate its hypoglycemic activity in vitro . METHODS ：The content of polysaccharides was determined by phenol-sulfuric acid colorimetry ，and the extraction rate of polysaccharides was calculated. Single factor test and response surface methodology were used to optimize the water extraction technology with the ratio of material to liquid ，extraction times and extraction time as factors ，and the extraction rate of polysaccharide as index. Single factor test was used to screen the concentration volume fraction of water extract and ethanol precipitation Using acarbose as contro l，4-nitrophenol-α-D-glucopyranoside method was used to investigate in vitro inhibitory activity of polysaccharide from L. chinensis seed to α-glucosidase. RESULTS ：The optimal technology was the ratio of material to liquid 1∶19 （g/mL），decocting for 3 times，1 h for each time ，concentrating the water extract to 40％ of original volume ，and adding ethanol to 80％ volume fraction. After deproteinization by Sevage method ，the crude polysaccharide of L. chinensis seed was obtained. The results of 3 times of validation tests showed that ，extraction rates of polysaccharide were 7.61％，7.89％，7.99％，average extraction rate was 7.83％（RSD＝2.52％，n＝3）. The contents of polysaccharide were 55.57％，55.83％ and 56.66％，average content was 56.02％（RSD＝1.81％，n＝3）. The inhibitory activity of the polysaccharide from L. chinensis seed to α-glucosidase were increased as concentration ；its IC 50 was 0.056 mg/mL，which was lower than positive control acarbose （0.196 mg/mL）. CONCLUSIONS：The optimal water extraction-ethanol precipitation technology of polysaccharide from L. chinensis seed is stable and feasible. The polysaccharide from L. chinensis seed show significant in vitro inhibitory effect on α-glucosidase，which is better than that of acarbose.

Physiochemical property variation in traditional Chinese medicine decoction before or after precipitation in alcohol and its relationship with wall stickiness in spray drying / 中国中药杂志

To explore the relationship between the variations of the physiochemical properties of traditional Chinese medicine(TCM) decoction before or after precipitation in alcohol and the wall stickiness in spray drying. In this study, widely used TCMs in clinic were selected to determine the physiochemical properties of TCM decoction before or after precipitation in alcohol separately.Afterwards, the principle component analysis(PCA),Hierarchical cluster analysis(HCA),and orthogonal partial least squares-discriminate analysis(OPLS-DA) were used to evaluate the relationship between the variations of those liquid before or after precipitation in alcohol and hot-melt stickiness in spray drying.Three types of statistical analysis methods all indicated that ethanol precipitation affected physiochemical properties of TCM decoction, and the variations of physical properties showed significant association with hot-melt stickiness in spray drying.The results of PCA-X and HCA suggested that the dynamic surface tension(DST) was impacted most by the alcohol deposition treatment,at the same time,the other 5 physiochemical properties were also affected.OPLS-DA verified that PCA-X and HCA results, and revealed that DST,equilibrium surface tension(EST) and pH were significantly affected by alcohol deposition treatment,and the order of the affecting factors from high to low was DST,EST and pH.Therefore,the downward trend of DST and pH were the important factors that directly affected the hot-melt stickiness of TCM after precipitation in alcohol,which would be probably caused by losing macromolecules alcoholic insoluble components and increasing relative proportions of organic acid and small molecule sugar.

Xinjiang sambucus sibirica Nakai bark extract promotes fracture healing / 中国组织工程研究

BACKGROUND: Studies have found that Sambucus sibirica Nakai can promote osteoblast division, proliferation, and secretion of alkaline phosphatase to accelerate bone matrix calcification, promote new bone formation, and promote the absorption of necrotic bone. OBJECTIVE: To observe the effects of two extracts of Xinjiang Sambucus sibirica Nakai bark in promoting fracture healing in rats. METHODS: A total of 108 male Sprague-Dawley rats, 3 months old, were randomly divided into sham-operated group, model group, Zhong Hua Die Da Wan group (0.54 g/kg, negative control group), high-, middle- and low-dose ethanol extract groups (0.314, 0.157, 0.078 g/kg), high-, middle, and low-dose water extract groups (0.340, 0.170, 0.085 g/kg). Except for the sham-operated group, the middle segment of the femoral shaft was cut off to make a model of open femoral fracture. In the sham-operated group, only the femoral shaft was exposed and no osteotomy was performed. Intragastric administration began at 1 day after modeling and continued for 6 weeks (1 time/day). At 2, 4, 6 weeks after modeling, the effects of two extracts of Sambucus sibirica Nakai bark on serum-related biochemical indicators, X-ray imaging, biomechanical indicators and hematoxylin-eosin staining were observed. RESULTS AND CONCLUSION: (1) Serum biochemical indicators: The serum calcium level of the high-dose ethanol extract group in each phase was lower than that of the sham-operated group and the model group, indicating that a faster osteogenesis in the high-dose ethanol extract group, followed by middle-dose ethanol extract group, low-dose ethanol extract group, and high-dose water extract group. The serum phosphorus level of ethanol extract groups was higher than that of sham-operated group, model group, and Zhong Hua Die Da Wan group; the serum alkaline phosphatase level of high-dose ethanol extract group at each stage was significantly higher than the other groups, indicating that a stronger osteoblast activity in the high-dose ethanol extract group, followed by the high-dose water extract group. (2) X-ray film: Fracture healing was significant in the high-dose ethanol extract group, fair in the Zhong Hua Die Da Wan group, high-dose water extract, middle-dose water extract group, middle-dose ethanol extract group, and poor in the low-dose ethanol extract group and low-dose water extract group. (3) Three-point bending test: At 6 weeks, the maximum load and maximum deflection of the femurs of the two extract groups were higher than those in the model group. The maximum load and maximum deflection of the femurs increased significantly in the high-dose ethanol extract group followed by the high-dose water extract group, middle-dose water extract group and middle-dose ethanol extract group. (4) Hematoxylin-eosin staining: Fibrous epiphysis gradually formed in the fracture area, and the bone marrow cavity was communicated. Bone healing was better in the high-dose ethanol extract and high-dose water extract groups than in the other groups. To conclude, these two extracts of Xinjiang Sambucus sibirica Nakai bark are capable of improving fracture healing. Moreover, different extraction methods and dosages of Sambucus sibirica Nakai bark demonstrate various effects on fracture healing. Compared with water extracts, ethanol extracts are better to promote fracture healing, and high-dose extracts have better effects than middle- and low-dose extracts.

Optimization of Water Extraction Technology for Bupi Yangshen Granules Based on Multi-index Weighting Analysis Method Combined with Orthogonal Test / 中国药房

OBJECTIVE： To optimize the water extraction technology of Bupi yangshen granules， and to provide basis for the follow-up research and development of it. METHODS： The contents of astragaloside Ⅳ and salvianolic acid B in water extract of Bupi yangshen granules， were determined by HPLC-ELSD and HPLC-DAD. Using the comprehensive score of contents of astragaloside Ⅳ and salvianolic acid B and extract yield as index， weight coefficient of indicators were determined by AHP， CRITIC and AHP-CRITIC mixed weighting method. L9（34） orthogonal test was used to optimize decoction time， water volume and decoction times in water extraction technology of Bupi yangshen granules. Validation test was also performed. RESULTS： The weight coefficient determined by AHP-CRITIC mixed weighting method was the most reasonable. The optimal extraction technology was decocting twice， adding 12-fold water， 1 h each time. The results of 3 times of validation test showed that the average contents of astragaloside Ⅳ and salvianolic acid B were 8.79， 609.50 mg （total amount of 121 g medicinal herbs extracted from whole prescription）， respectively. The average extract yield was 31.24％. Average comprehensive score was 96.59（RSD＝1.01％，n＝3）. CONCLUSIONS： The optimized water extraction technology is reproducible， stable and feasible. It can provide a scientific basis for the follow-up development and industrial production of Bupi yangshen granules.

Optimization of Water Extraction Technology of Saikosaponin a and Saikosaponin d from Bupleurum chinense by Electroma- gnetic Cracking / 中国药房

OBJECTIVE： To establish the method for simultaneous determination of saikosaponin a and saikosaponin d in Bupleurum chinense water extract， and to optimize its water extraction technology for electromagnetic cracking. METHODS： HPLC method was used. The determination was performed on SB-C18 column with mobile phase consisted of acetonitrile-water （gradient elution） at the flow rate of 1.0 mL/min. The column temperature was 40 ℃. The detection wavelength was set at 210 nm， and  the sample size was 10 μL. Based on single factor experiment， using extraction time， particle size， solide-liquid ratio as factors， total extraction rate of saikosaponin a to saikosaponin d as indexes， the extraction technology was optimized by using Box-Behnken response surface methdology， and compared with the results of ultrasound method and decoction method. RESULTS： The linear range of saikosaponin a and saikosaponin d were 50.70-202.80 μg/mL （r＝0.999 9） and 50.50-202.00 μg/mL （r＝0.999 9）， respectively. The quantitation limits were 0.16 and 0.13 μg/mL， respectively. The detection limits were 0.05 and 0.04 μg/mL，respectively. RSDs of precision， stability and reproducibility tests were all lower than 2％. The average recoveries were 98.23-102.47％ （RSD＝1.80％， n＝6） and 98.84％-102.06％ （RSD＝1.60％， n＝6）. The optimal extraction technology was as follows： the extraction time of 2.50 min； the particle size of 80 mesh， solid-liquid ratio of 1 ∶ 28 （g/mL）. Results of 3 times of validation tests showed that the optimal technology included the average total extraction rates of saikosaponin a and saikosaponin d were 8.42 mg/g， which was higher than that of ultrasonic method （8.34 mg/g） and decoction method （8.06 mg/g）， and the extration time was shorter. CONCLUSIONS： Established method is simple and accurate， and can be used for simultaneous determination of saikosaponin a and saikosaponin d in B. chinense water extract. The optimized water extraction technology for electromagnetic cracking is stable and feasible.

Optimization of Water Extraction Technology of Taohe Chengqi Decoction by Response Surface Methodology Combined with Information Entropy Theory / 中国药房

OBJECTIVE： To optimize the water extraction technology of classic formula Taohe chengqi decoction. METHODS： Based on single factor test， combined with response surface methodology and information entropy theory， the soaking time， solid-liquid ratio and extraction time were investigated. Using the contents of rhein， amygdalin， cinnamaldehyde and glycyrrhizic acid in Taohe chengqi decoction as indexes， information entropy theory was used to assign weight coefficients to each evaluation index and calculate the comprehensive score. Through Design-Expert 10 software， the interactions of each factor were analyzed. Water extraction technology was optimized， and validation test was also performed. RESULTS： According to information entropy theory， the weight coefficients of rhein， amygdalin， glycyrrhizic acid and cinnamaldehyde were located at 0.097 6， 0.363 2， 0.173 5 and 0.365 7. The results of interaction analysis showed that the material-liquid ratio had a greater impact on the comprehensive score. The optimal water extraction technology of Taohe chengqi decoction were determined as that soaking time was 60 min； the ratio of material to liquid was 1 ∶ 10 （g/mL）； total extraction time was 130 min （extracting for 3 times， lasting for 65， 33， 32 min each time）. The results of verification test showed that RSD of content of each index component and the comprehensive score was less than 3％. CONCLUSIONS： The optimal water extraction technology is proved to be stable and feasible， which can provide the basis for the further development and utilization of Taohe chengqi decoction.

Optimization of Water Extraction Technology of Chaihu Anxin Capsules by Box-Behnken Response Surface Method Combined with Multi-index Comprehensive Scoring Method / 中国药房

OBJECTIVE： To optimize the water extraction technology of Chaihu anxin capsules. METHODS： Taking comprehensive scoring value of  the contents of gallic acid，chlorogenic acid，puerarin，glycoside，rutin，cinnamic acid， quercetin and the yield of extract as investigation index， using multiple of adding liquid， soaking time， reflux time and extraction times as factors， water extraction technology of Chaihu anxin capsule was optimized by Box-Behnken response surface method based on single factor test. Validation test was conducted. RESULTS： The optimal extraction technology of Chaihu anxin capsules was adding 11 times of water， soaking for 10 h， extracting for 2 times， refluxing for 1.5 h each time. In validation test， the relative deviation of comprehensive scoring value to predicted value was 1.87％ for 3 batches of samples （RSD＜2％， n＝3）. CONCLUSIONS： The optimal extraction technology is simple， stable and suitable for further production of Chaihu anxin capsules.

Preparation Process and Formula of Kang'aiping Dispersible Tablets / 中国药学杂志

OBJECTIVE: To study preparation process and formula of Kang'aiping dispersible tablets. METHODS: Orthogonal designs were used to optimize water extraction process of traditional Chinese herbs from Kang'aiping pills, spray drying process of extracts and formulas of Kang'aiping dispersible tablets. RESULTS: The optimal water-extraction process is established by adding eight times water of raw materials, boiling for 60 min and extracting for two times. The optimal spray drying process parameters are that the density of the liquid extracts is 1.20 g•mL-1, inlet air temperature is 180 ℃ and outlet air temperature is 80 ℃. And the optimal formula consists of 37% microcrystalline cellulose, 5:1 of the ratio of croscarmellose sodium and PVPP, and 0.15% magnesium stearate. CONCLUSION: Formula and process optimized by using orthogonal experimental design is suitable for preparation of Kang'aiping dispersible tablets.

Optimization of water extraction technology of Yiqi Huoxue Prescription based on orthogonal test design and BP neural network / 中草药

Objective: To optimize the water extraction technology parameters of Yiqi Huoxue Prescription (YHP). Methods: On the basis of single factor experiment, orthogonal experiment design was used to evaluate the transfer rate and extraction yield of salvianolic acid B and hydroxysafflower yellow A by using adding water, extraction time and soaking time as factors. The comprehensive score was obtained by G1-entropy weight method. The optimal water extraction technology was obtained by orthogonal test design, and another method-BP neural network modeling was used to optimize the network model and target optimization. The two analytical methods were compared in the verification experiment to find the optimal water extraction technology parameters of YHP. Results: Based on the comparison of the two analytical methods, it was found that the comprehensive score of the optimal water extraction technology obtained by orthogonal test analysis was slightly higher than that obtained by BP neural network modeling. Therefore, it was finally determined that the optimal water extraction technology parameters of YHP were as follow: water extraction for three times, soaking for 0.5 h, adding water of 20 times, and extracting time for 3.5 h. Conclusion: The optimal water extraction technology of YHP is stable and feasible, which provides new ideas and references for the development and modernization of new drugs of compound Chinese medicine.

Study on the Optimization of Water-extraction Technology of Yao Medicine Jasminum lanceolarium and the Anti-inflammatory and Analgesic Effect of Its Water Extract / 中国药房

OBJECTIVE:To optimize the water-extraction technology of Yao medicine Jasminum lanceolarium and study the anti-inflammatory and analgesic effect of its water extract. METHODS:The single factor test and orthogonal test were used to investigate the effects of extraction time,liquid-solid ratio and extraction times on water-extraction technology and optimize extraction technology using ferulic acid content and dry extract yield as index. The validation test was also conducted. With aspirin as positive control,the method of ear edema induced by xylene and paw edema induced by carrageenan in mice were used to observe the anti-inflammation effects of low-dose,medium-dose and high-dose(3,6,12 g/kg,by crude drug)of J. lanceolarium water extract;the analgesic effect of those was investigated by hot-plate induced pain response test and mice writhing response test. The contents of TNF-α and IL-1 β were determined by ELISA after carrageenan induced inflammation in mice. The contents of PGE2in serum and inflammation tissue were detected by UV spectrophotometry.RESULTS:The optimal extraction technology was as follows as extraction time of 120 min,liquid-solid ratio of 16:1(mL/g),extracting for 3 times.Compared to model group,the ear edema degree and paw edema rate of mice were raduced,writhing response times were lessened,and pain response threshold was enhanced significantly in low-dose,medium-dose and high-dose groups of J. lanceolarium water extract(P<0.05 or P<0.01). Compared to model group,the contents of TNF-α,IL-1β and PGE2in serum and the content of PGE2in inflammation tissue of mice were raduced significantly in low-dose,medium-dose and high-dose groups of J. lanceolarium water extract(P<0.05 or P<0.01). CONCLUSIONS:The optimized water-extraction technology of Yao medicine J. lanceolarium shows high efficiency,stable and feasible.Water extract shows significant anti-inflammatory and analgesic effects through reducing the contents of TNF-α,IL-1β and PGE2.

Optimization of Water Extraction and Alcohol Precipitation Process of Qizhi Yifei Granules by Multi-Index Orthogonal Experimental / 中国中医药信息杂志

Objective To optimize the extraction and alcohol precipitation process of Qizhi Yifei Granules by multi index orthogonal experiment. Methods With extraction rate of astragaloside in Astragali Radix, quercetin-3-O-β-D-glucose-7-O-β-D-gentian diglucoside in Descurainiae Semen Lepidii Semen and yield rate of dry extract as indexes, the extraction process of Qizhi Yifei Granules was optimized. Taking the retention rate of astragaloside and quercetin-3-O-β-D-glucose-7-O-β-D-gentian diglucoside as indexes, the alcohol precipitation process was optimized. Results The best water extraction process was as follows: adding 10 times amount of water, extracting for 1.5 h, 3 times. The optimum alcohol precipitation process was: concentrated to the relative density of 1.05–1.10 (60 ℃), adding ethanol to 60％ and alcohol precipitation. Conclusion The optimized extraction and alcohol precipitation process is stable and feasible, which can provide the basis for the preparation.

Optimization of the extraction technology of ganglouyuchuang lotion by orthogonal test / 医学研究生学报

Objective Ganglouyuchuang lotion was used to dress the wound for Anal fistula in Crohn's disease, control inflammation and promote wound healing.This paper studied the extraction techonology of ganglouyuchuang lotion.Methods Four factors of ganglouyuchuang lotion, including volume of water, extraction time, extraction times and liquid ratio, were studied by the orthogonal test, and three levels were selected for each factor.The content of sodium danshensu, the active component contained in Chinese herbal medicine, was regarded as evaluating indicator, and the content of Danshensu Sodium was determined by HPLC.The water extraction and alcohol precipitation technology of ganglouyuchuang lotion was optimized according to the results of measurement.Results The optimum extraction technology of ganglouyuchuang lotion was as follows: four herbs, including Salvia miltiorrhiza, Radix Astragali, Radix sanguisorbae and Senecio were added with8 times amount of water overnight and decocted 3 times with 2 h, 1.5 h, and 1.5 h respectively, and then the extraction was concentrated to the ratio of herbs and concentrate of 1∶1.5.The results showed that the contents of Danshensu Sodium from the three examples were 0.520, 0.498, and 0.521 mg/mL, and the RSD were 0.34%, 0.41%, and 0.29%.Conclusion The optimum extraction technology is feasible and applicable for the preparation of ganglouyuchuang lotion.

Protective Effect of Different Extraction of Agaricus blazei Murrill on HaCaT Cells Damaged by UVB / 浙江中医药大学学报

[Objective] To investigate the protective effects of different extraction of Agaricus blazei Murrill on HaCaT cells damaged by UVB. [Methods] The cell viability which was detected by MTT method was used to determine the impact of different dose of UVB and different extraction of Agaricus blazei Murrill on normal HaCaT cells and HaCaT cells damaged by UVB. [Results] ①The HaCaT cells viability declined after irradiation with UVB, and it was a dose-dependent manner. The cell viability was 53.23%when the dose of UVB was 20mj/cm2. ②The water extraction at the concentration of 0.2~4mg·mL-1, aqueous extraction at the concentration of 0.1~2mg·mL-1 and crude polysaccharide at the concentration of 0.2~1mg·mL-1 could promote the proliferation of HaCaT cells, while aqueous extraction and crude polysaccharide inhibited the proliferation of HaCaT cells at higher concentrations.③The water extraction at the concentration of 1~4mg·mL-1, aqueous extraction at the concentration of 1~2mg·mL-1 and crude polysaccharide at the concentration of 0.5~1mg·mL-1 could enhance the cells viability which was irradiated by 20mj/cm2 UVB (P<0.01). [Conclusion] The different extraction of Agaricus blazei Murrill all could relieve the photo-damage caused by UVB, and it has the potential of anti-photoaging.

Optimization of Water Extraction Technology of Yangxue Jiegu Capsule by Orthogonal Test / 中国药房

OBJECTIVE:To optimize the water extraction technology of Yangxue Jiegu capsule. METHODS:Using adding amount of water,decoction time and decoction times as investigation factors,ferulic acid content,icariin content and yield rate as investigation indexes,orthogonal test was used to optimize the optimal water extraction technology of Yangxue Jiegu capsule;and verification test was conducted. RESULTS:The optimized extraction technology was 10-fold water,extracting 3 times,1 h once. Contents of ferulic acid and icariin were 0.38,1.23 mg/g(n=3),yield rate was 28.2%(n=3),average comprehensive score was 97.11 (RSD=2.77%,n=3). CONCLUSIONS:Optimized extraction technology is feasible,accurate,reliable,and can be used for the extraction and preparation of Yangxue Jiegu capsule.

Study on Water Extraction Technology of Yinju Jiedu Oral Liquid / 中国药房

OBJECTIVE:To optimize the water extraction technology of Yinju jiedu oral liquid,and provide reference for the industrial production of the preparation. METHODS:According to the investigation of extraction time-extraction rate curves of chlo-rohenic acid of Yinju jiedu formula and extraction rate of chlorohenic acid in Lonicera japonica and other combined medicinal mate-rials in the formula,decoction methods and time of L. japonica were determined. Using the comprehensive scores of linarin,harpa-goside,(R,S)-epigoitrin,psoralen+angelicin contents and dry extraction yield as indexes,L9(34)orthogonal test was designed to detect the effects of adding water amount,decoction time times and optimize the extraction technology of the residues and other me-dicinal materials. Verification test was conducted. RESULTS:The optimal technology was L. japonica decocted first for 30 min with 8-fold water;the residues and other medicinal materials were decocted with 8-fold water for 3 times,1 h each time;combin-ing all the syrups. In verification test,the average contents of chlorohenic acid,linarin,harpagoside,(R,S)-epigoitrin,psoralen+angelicin were respectively 34.51,10.31,1.97,0.21,9.79 mg/g(RSD=1.24％,1.19％,1.40％,1.71％,1.28％,n=3);aver-age dry extraction yield was 25.4％(RSD=1.64％,n=3);average extraction rate of chlorohenic acid was 78.95％(RSD=1.24％,n=3). CONCLUSIONS:In the optimized water extraction technology,both the extraction rate of chlorohenic acid and contents of other ingredients are relatively high. The technology is stable and feasible.

Comparison of Speciation Analysis of 7 Trace Elements in Opercalina turperthum by Water Extraction and Semi-bionic Extraction / 中国药房

OBJECTIVE:To study the extraction rate and speciation of antivitiligo-related elements in Opercalina turperthum by water extraction and semi-bionic extraction. METHODS:Water extraction and semi-bionic extraction were respectively used. Wa-ter-soluble state and suspension state in extract of O. turperthum were separated by microporous filtering film;organic and inorgan-ic trace elements in water-soluble state were separated by macroporous resin. The contents of Cu,Zn,Fe,Ca,Mg,Mn and Sr were detected by flame atomic adsorption spectrophotometry,and speciation analysis was conducted. RESULTS:After water extrac-tion,extraction rates of 7 trace elements were 40.47%-72.49%;ratio of suspended particles was 3.69%-8.78%;ratio of organic state/inorganic state was 104.36% in water-soluble state of Sr and 3.94%-48.39% in water-soluble state of Cu,Zn,Fe,Ca,Mg, Mn. After semi-bionic extraction,except for Mn,extraction rates of trace elements were higher than water extraction,extraction rates of Cu,Zn,Fe,Ca,Mg,Sr were 77.69%-90.19%;ratio of suspended particles was 0.39%-8.57%;the ratio of organic state/inorganic state was 72.74%-180.79% in water-soluble state of elements. CONCLUSIONS:Cu,Zn,Fe,Ca,Mg,Mn and Sr in O. turperthum are dissolved easily,mainly existing in the form of inorganic state. After semi-bionic extraction,except for Mn,the dis-solution rate of other elements and the proportion of organic trace elements after dissolution increase significantly. Both dissolution and effective utilization rate of trace elements by semi-bionic extraction are higher than water extraction.