ABSTRACT
OBJECTIVE@#To investigate the clinical effect of total hip replacement (THA) in the treatment of traumatic arthritis secondary to acetabular fracture.@*METHODS@#From October 2019 to June 2022, 15 patients with secondary traumatic arthritis of acetabulum fracture were treated with THA. There were 8 males and 7 females, aged from 40 to 76 years old with an average of (59.20±9.46) years old. Prosthesis loosening, dislocation of hip joint, range of motion of hip joint, nerve injury and other conditions were recorded before and after surgery. Harris score, visual analogue scale (VAS) and imaging were used to evaluate hip joint function and surgical effect.@*RESULTS@#Follow-up time ranged 6 to 39 months with an average of (18.33±9.27) months. All the 15 patients successfully completed the operation, no nerve and blood vessel injury during the operation, postoperative wound healing was stageⅠ, no infection, one case of acetabular side prosthesis loosening at half a year after operation, and recovered well after revision surgery, one case of hip dislocation was cured after open reduction treatment, no adverse consequences. Harris score at the last postoperative follow-up was (88.60±4.01) points, compared with the preoperative (47.20±11.77) points, the difference was statistically significant (P<0.05), and VAS at the lateat postoperative follow-up was 1 (1) points, compared with the preoperative 8 (2) points, the difference was statistically significant (P<0.05). At the last follow-up, the pain symptoms were relieved or disappeared, and the joint function was satisfactory. The imaging data of the latest follow-up showed joint was well pseudoradiated, no abnormal ossification occurred, and the prosthesis was not loose.@*CONCLUSION@#THA is effective in the treatment of traumatic arthritis secondary to acetabular fracture and can effectively improve the quality of life of patients. Preoperative comprehensive evaluation and bone defect evaluation of patients, and intraoperative management of acetabulum, femur, internal fixation and bone defect are key factors for the success of surgery.
Subject(s)
Male , Female , Humans , Adult , Middle Aged , Aged , Arthroplasty, Replacement, Hip/methods , Prosthesis Failure , Retrospective Studies , Quality of Life , Acetabulum/injuries , Hip Prosthesis , Hip Fractures/surgery , Spinal Fractures/surgery , Arthritis/surgery , Treatment Outcome , Follow-Up StudiesABSTRACT
Bone defect has always been a major clinical challenge because of its great difficulty and long period of treatment. Drynariae Rhizoma is a commonly used medicine in osteology and traumatology of traditional Chinese medicine， and its active ingredients（mainly flavonoids） facilitate osteoblast differentiation of bone marrow mesenchymal stem cells， osteoclast proliferation， vascular-osteogenic coupling， and inhibit osteoclast activity to promote bone mineralization， and repair and reconstruction of bone defect. As a good substitute for bone regeneration drugs， the active constituents of Drynariae Rhizoma can be loaded on scaffold materials of tissue engineering， which greatly improves the bioavailability of the drug. Meanwhile， the sustained-release microspheres also solve some problems such as sudden drug release from the scaffolds， and the composite scaffolds with active ingredient of Drynariae Rhizoma prepared by them have good ossification activity and osteoinduction， with precise bone repair effects， which meet the diverse performance requirements of bone grafts and have a promising clinical application prospect.
ABSTRACT
Objective@#To investigate the osteogenic properties of a methacrylated gelatin (GelMA) / bone marrow mesenchymal stem cells (BMSCs) composite hydrogel applied to the skull defect area of rats and to provide an experimental basis for the development of bone regeneration biomaterials.@*Methods@#This study was approved by the Animal Ethics Committee of Nanjing University. A novel photocurable composite biohydrogel was developed by constructing photoinitiators [lthium phenyl (2,4,6-trimethylbenzoyl) phosphinate, LAP], GelMA, and BMSCs. The surface morphology and elemental composition of the gel were examined using scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDX). The compressive strength of the gel was evaluated using an electronic universal testing machine. After in vitro culture for 1, 2, and 5 days, the proliferation of the BMSCs in the hydrogels was assessed using a CCK-8 assay, and their survival and morphology were examined through confocal microscopy. A 5 mm critical bone deficiency model was generated in a rat skull. The group receiving composite hydrogel treatment was referred to as the GelMA/BMSCs group, whereas the untreated group served as the control group. At the 4th and 8th weeks, micro-CT scans were taken to measure the bone defect area and new bone index, while at the 8th week, skull samples from the defect area were subjected to H&E staining, van Gieson staining, and Goldner staining to evaluate the quality of bone regeneration and new bone formation.@*Results@#SEM observed that the solidified GelMA showed a 3D spongy gel network with uniform morphology, the porosity of GelMA was 73.41% and the pore size of GelMA was (28.75 ± 7.13) μm. EDX results showed that C and O were evenly distributed in the network macroporous structure of hydrogel. The hydrogel compression strength was 152 kPa. On the 5th day of GelMA/BMSCs culture, the cellular morphology transitioned from oval to spindle shaped under microscopic observation, accompanied by a significant increase in cell proliferation (159.4%, as determined by the CCK-8 assay). At 4 weeks after surgery, a 3D reconstructed micro-CT image revealed a minimal reduction in bone defect size within the control group and abundant new bone formation in the GelMA/BMSCs group. At 8 weeks after surgery, no significant changes were observed in the control group's bone defect area, with only limited evidence of new bone growth; however, substantial healing of skull defects was evident in the GelMA/BMSCs group. Quantitative analysis at both the 4- and 8-week examinations indicated significant improvements in the new bone volume (BV), new bone volume/total bone volume (BV/TV), bone surface (BS), and bone surface/total bone volume (BS/TV) in the GelMA/BMSCs group compared to those in the control group (P<0.05). Histological staining showed continuous and dense formation of bone tissue within the defects in the GelMA/BMSCs group and only sporadic formation of new bone, primarily consisting of fibrous connective tissue, at the defect edge in the control group.@*Conclusion@#Photocuring hydrogel-based stem cell therapy exhibits favorable biosafety profiles and has potential for clinical application by inducing new bone formation and promoting maturation within rat skull defects.
ABSTRACT
Objective@#To explore the treatment options for congenitally missing teeth in patients with ectodermal dysplasia and provide a clinical reference.@*Methods@#A patient with ectodermal dysplasia with a concave midface, anterior protrusion of the chin, and underdevelopment of the lower third of the face presented with congenital loss of multiple maxillary teeth, malocclusion of the remaining teeth, congenital loss of mandibular dentition, small dental arches, and upper and lower alveolar bone hypoplasia. The patient was treated by means of a removable partial maxillary prosthesis, implants in the anterior region of the lower mandible designed with the assistance of digital guides, and bar-clamped implant-overlay prostheses. A literature review of the protocol for the treatment of this condition was also conducted.@*Results@#In addition to good retention and stability after denture wear, an excellent occlusal relationship, improvement of the patient's facial appearance, including upper and lower lip fullness, more equal balancing of the lower and middle 1/3 of the face, and improved masticatory function were achieved. The results of the literature review showed that patients with ectodermal dysplasia who are congenitally edentulous usually have a complex intraoral situation that makes restoration difficult, and common restorative modalities for these patients include fixed bridges, removable partial dentures, complete dentures, overdentures, and implant prostheses, which need to be selected according to the actual intraoral situation of each patient. Currently, there is no consensus on the treatment of congenitally missing teeth in patients with ectodermal dysplasia, and some scholars have suggested that fixed restorations be recommended for patients with fewer missing teeth, while the option of removable or implant-covered denture restorations should be given to patients with more missing teeth, with removeable prostheses for underage patients that are replaced with permanent fixed prostheses when the jaws have stabilized.@*Conclusion@#In patients with ectodermal dysplasia with congenital tooth loss, all factors should be taken into account, and an individualized restorative plan should be developed.
ABSTRACT
Objective@#Based on 3D printing technology, explore the precision of a perforator vessel location guide plate for fibular musculocutaneous flaps before the transplantation of fibular osteocutaneous flaps and evaluate its application effects.@*Methods@#This study was reviewed and approved by the ethics committee, and informed consent was obtained from the patients. From May 2019 to October 2022, 14 patients with jaw defects who needed to undergo fibular perforator flap transplantation at the First Affiliated Hospital of Xinjiang Medical University were selected. For the seven patients in the guide plate group, CTA was combined with Mimics software to reconstruct both lower limbs, and the perforator vessel positioning guide for locating perforator vessels was designed; the two ends of the guide plate were designed as fixed ends, with the upper end fixed to the knee joint and the lower end fixed to the ankle joint, and the guide plate was fabricated by a 3D printer. For the seven patients in the control group, a conventional handheld Doppler probe was used for perforator vessel location. The average operation time, bleeding volume, recovery time, deviation of perforator vessel location, postoperative flap-related complications, postoperative donor site shape satisfaction, and lower extremity functional scale (LEFS) score were recorded. SPSS 25.0 software was used for statistical analysis.@*Results@#The average operation time, bleeding volume, recovery time, deviation of perforator vessel location and postoperative donor site shape satisfaction were significantly better in the guide plate group than in the control group (P<0.05); moreover, the differences in postoperative flap-related complications and LEFS scores were not statistically significant (P>0.05).@*Conclusion@#Based on 3D printing technology, fibular musculocutaneous flap perforator vessels can be more accurately located using a guide plate and the knee and ankle as fixed points, and this method can effectively stabilize the guide position, prevent soft tissue offset, and improve positioning accuracy and thus deserves to be generalized.
ABSTRACT
Objective@#To study the clinical effect of a polyetheretherketone (PEEK) bonding bridge on the loss of 3 internal incisors in patients with periodontitis.@*Methods@#This study was reviewed and approved by the ethics committee, and informed consent was obtained from the patients. Thirty-eight patients with periodontitis and 3 missing central or lateral teeth were selected to undergo restoration with a PEEK bonding bridge and then returned to the hospital 3, 6, 12, and 24 months after the restoration was completed. The survival rate of the restorations was assessed by the modified USPHS/Ryge criteria. The plaque index, gingival index, periodontal probing depth and attachment loss of the abutments were recorded, and the changes in periodontal tissues after restoration were observed and compared.@*Results@#Over 24 months of clinical follow-up observation of 38 patients, only 1 patient underwent secondary bonding after partial debonding (evaluated as grade B), while bonding was successful in the other 37 cases (evaluated as grade A). The plaque index, gingival index and periodontal probing depth were significantly lower after restoration than before (P<0.05). There was no significant change in attachment loss between before and after restoration (P>0.05).@*Conclusion@#For periodontitis patients missing 3 internal incisors, short-term PEEK bonding bridge repair has good clinical efficacy.
ABSTRACT
Objective@#To evaluate the bone repair effect of 3D-printed magnesium (Mg)-loaded polycaprolactone (PCL) scaffolds in a rat skull defect model.@*Methods@#PCL scaffolds mixed with Mg microparticles were prepared by using 3D printing technology, as were pure PCL scaffolds. The surface morphologies of the two scaffolds were observed by scanning electron microscopy (SEM), and the surface elemental composition was analyzed via energy dispersive spectroscopy (EDS). The physical properties of the scaffolds were characterized through contact angle measurements and an electronic universal testing machine. This study has been reviewed and approved by the Ethics Committee. A critical size defect model was established in the skull of 15 Sprague-Dawley (SD) rats, which were divided into the PCL group, PCL-Mg group, and untreated group, with 5 rats in each group. Micro-CT scanning was performed to detect and analyze skull defect healing at 4 and 8 weeks after surgery, and samples from the skull defect area and major organs of the rats were obtained for histological staining at 8 weeks after surgery.@*Results@#The scaffolds had a pore size of (480 ± 25) μm, a fiber diameter of (300 ± 25) μm, and a porosity of approximately 66%. The PCL-Mg scaffolds contained 1.0 At% Mg, indicating successful incorporation of Mg microparticles. The contact angle of the PCL-Mg scaffolds was 68.97° ± 1.39°, indicating improved wettability compared to that of pure PCL scaffolds. Additionally, compared with that of pure PCL scaffolds, the compressive modulus of the PCL-Mg scaffolds was (57.37 ± 8.33) MPa, demonstrating enhanced strength. The PCL-Mg group exhibited the best bone formation behavior in the skull defect area compared with the control group and PCL group at 4 and 8 weeks after surgery. Moreover, quantitative parameters, such as bone volume (BV), bone volume/total volume (BV/TV), bone surface (BS), bone surface/total volume (BS/TV), trabecular thickness (Tb.Th), trabecular number (Tb.N) and bone mineral density (BMD), of skull defects were better than those in the other groups, indicating the best bone regeneration effect. H&E, Goldner, and VG staining revealed more mineralized new bone formation in the PCL-Mg group than in the other groups, and H&E staining of the major organs revealed good biosafety of the material.@*Conclusion@#PCL-Mg scaffolds can promote the repair of bone defects and have clinical potential as a new scaffold material for the repair of maxillofacial bone defects.
ABSTRACT
@#After tooth extraction, significant absorption occurs in the soft and hard tissues of the alveolar ridge. The goal of alveolar ridge preservation is to maintain the volume and shape of the alveolar ridge's soft and hard tissues as much as possible so as to provide suitable conditions for implant placement. Currently, there are challenges in classifying the socket for alveolar ridge preservation, such as the difficulty in directly guiding the selection of graft materials and clinical procedures and the insufficient space for particle xenograft maintenance, resulting in poor bone regeneration. Plasmatrix is an autologous blood derivative that effectively enhances tissue regeneration. This article introduced the characteristics of soft and hard tissue defects after tooth extraction and the primary applications of plasmatrix for alveolar ridge preservation (liquid plasmatrix, solid plasmatrix membrane/plug, and plasmatrix bone blocks) as well as the proposed methods for the reclassification of sockets for alveolar ridge preservation based on soft and hard tissue defects at the extraction site to facilitate the creation of clinical recommendations. The proposed classifications are as follows: Class I, extraction socket without bone defect, with or without soft tissue defect; Class Ⅱ, extraction socket with bone defect, both sides with bone wall defect less than 50%, with or without soft tissue defect; Class Ⅲ, extraction socket with bone tissue defect, at least one side with bone wall defect greater than 50%, with or without soft tissue defect. For the Class I socket, a solid plasmatrix membrane or plug is inserted, followed by injection of liquid plasmatrix, using a double-layer solid plasmatrix membrane for socket closure; for the ClassⅡ socket, plasmatrix bone blocks are inserted, followed by injection of liquid plasmatrix and secondary solidification, using absorbable collagen membrane and double-layer solid plasmatrix membrane for socket closure; for the ClassⅢ socket, tenting screws are used to maintain height, followed by implantation of plasmatrix bone blocks, injection of liquid plasmatrix and secondary solidification, using absorbable collagen membrane and double-layer solid plasmatrix membrane for socket closure. The aim of this article is to provide comprehensive knowledge of plasmatrix for oral clinicians to serve as a reference to simplify the clinical decision-making process and procedures for alveolar ridge preservation.
ABSTRACT
ABSTRACT Introduction: Coarctation of the aorta (CoA) is a narrowing of the thoracic aorta that often manifests as discrete stenosis but may be tortuous or in long segment. The study aimed to evaluate pre and post-surgical aspects of pediatric patients submitted to CoA surgical correction and to identify possible predisposing factors for aortic recoarctation. Methods: Twenty-five patients were divided into groups according to presence (N=8) or absence (N=17) of recoarctation after surgical correction of CoA and evaluated according to clinical-demographic profile, vascular characteristics via computed angiotomography (CAT), and other pathological conditions. Results: Majority of males (64%), ≥ 15 days old (76%), ≥ 2.5 kg (80%). There was similarity between groups with and without recoarctation regarding sex (male: 87% vs. 53%; P=0.277), age (≥ 15 days: 62.5 vs. 82%; P=0.505), and weight (≥ 2.5 kg: 87.5 vs. 76.5; P=0,492). Altered values of aortic root/Valsalva diameter, proximal transverse arch, and distal isthmus, and normal values for aorta prevailed in preoperative CAT. Normal values for the aortic root/Valsalva sinus diameter were observed with and without recoarctation, the same for both groups regarding ascending and descending aorta in postoperative CAT. No significant difference for altered values of proximal transverse arch and alteration in distal isthmus was observed. Conclusion: No predictive risk for recoarctation was observed. CTA proved to be important in CoA diagnosis and management, since CoA is mainly related with altered diameter of aortic root/sinus of Valsalva and proximal and distal aortic arch/isthmus, however, it failed to show predictive risk for recoarctation.
ABSTRACT
El tratamiento del defecto epitelial refractario es un reto y está sujeto al desarrollo de estudios preclínicos y clínicos con el objetivo de obtener tratamientos eficaces, entre los que emerge la insulina tópica. El objetivo del presente artículo fue describir la respuesta cicatrizal del epitelio corneal bajo tratamiento con colirio de insulina. Se presentan dos pacientes con diagnóstico de defecto epitelial persistente posúlcera corneal. Se indicó insulina tópica una gota cada 6 horas, con evolución hacia la epitelización corneal total a los 10 días de iniciado el tratamiento. Se sugiere el mecanismo por el cual la insulina promueve la cicatrización corneal al lograr la restauración de los nervios corneales y favorecer la migración de células epiteliales. En ambos casos el colirio de insulina logró la promover la cicatrización epitelial total de la córnea por lo que se es útil en el tratamiento de defecto epitelial persistente.
The treatment of refractory epithelial defect is a challenge and depends upon the development of preclinical or clinical studies aimed at obtaining effective treatments, among which topical insulin emerges. The objective of this article was to describe the healing response of the corneal epithelium under treatment with insulin eye drops. The cases are presented of two patients with a diagnosis of persistent post-corneal ulcer epithelial defect. Topical insulin was prescribed at one drop every six hours, with evolution towards total corneal epithelialization ten days after the treatment started. The mechanism is suggested by which insulin promotes corneal healing, thus restoring corneal nerves and favoring epithelial cell migration. In both cases, the insulin eye drops were able to promote total epithelial healing of the cornea, making it useful in the treatment of persistent epithelial defect.
ABSTRACT
Cuando se produce una erosión corneal y fracasa la epitelización corneal surgen los defectos epiteliales corneales persistentes, cuyo tratamiento es un desafío para el oftalmólogo. Es muy frecuente el fracaso del tratamiento convencional por lo que se mantiene el interés en la búsqueda de otros factores de crecimiento para la cicatrización epitelial tales como los colirios de insulina. La insulina es un péptido estrechamente relacionado con el factor de crecimiento similar a la insulina 1. Su mecanismo de acción no es bien comprendido, sin embargo se acepta que es capaz de inducir migración y proliferación de las células epiteliales corneales, por lo que promueve y acelera la reepitelización de defectos epiteliales persistentes refractarios a tratamiento. La ausencia de una presentación comercial de colirio de insulina, hace necesario conocer su estabilidad físicoquímica y microbiológica así como la eficacia, efectividad y seguridad del colirio de insulina a diferentes concentraciones. De ahí la motivación para realizar una revisión de la literatura existente sobre el empleo del colirio de insulina en el tratamiento del defecto epitelial corneal persistente. Se realizó la búsqueda en bases de datos electrónicas como PubMed Central, EBSCO, Clinical Trials.gov, MEDLINE OVID, EMBASE OVID con el objeto de identificar artículos relacionados con el tema.
When corneal erosion occurs and corneal epithelialization fails, persistent corneal epithelial defects arise, whose treatment is a challenge for the ophthalmologist. The failure of conventional treatment is very frequent; therefore, there is still interest in the search for other growth factors for epithelial healing, such as insulin eye drops. Insulin is a peptide closely related to insulin-like growth factor 1. Its mechanism of action is not well understood; however, it is accepted that it is capable of inducing migration and proliferation of corneal epithelial cells, thereby promoting and accelerating reepithelialization of persistent epithelial defects refractory to treatment. The absence of a commercial presentation for insulin eye drops makes it necessary to know its physicochemical and microbiological stability, as well as the efficacy, effectiveness and safety of insulin eye drops at different concentrations; hence the motivation to review the existing literature on the use of insulin eye drops in the treatment of persistent corneal epithelial defects. The search was carried out in electronic databases such as PubMed Central, EBSCO, Clinical Trials.gov, MEDLINE OVID, EMBASE OVID, with the aim of identifying relevant articles related to the topic.
ABSTRACT
Purpose: Glaucoma influences vision?related quality of life (VRQoL) of an individual in various ways. There are very limited studies on the Indian population and the northern part of India. Therefore, we conducted the present study to evaluate VRQoL in glaucoma patients as well as the association between the severity of glaucoma and VRQoL. Methods: An institution?based, cross?sectional, analytical study was conducted from August 2022 to October 2022 involving 190 participants (95 glaucoma patients and 95 controls). The glaucoma quality of life?15 (GQL?15) questionnaire was explained in their vernacular language by the interviewer. The scoring was given according to the validated scoring algorithm for the questionnaire. Results: Mean GQL score in the control group was 19.66 ± 5.5 and in glaucoma cases was 32.8 ± 10.2, whereas the mean score of mild glaucoma cases was 22.3 ± 4.83, moderate glaucoma cases was 36.3 ± 4.09, and severe glaucoma cases was 47.24 ± 3.03. Therefore, as the severity of glaucoma increases, the GQL score also increases, indicating poorer quality of life. Visual field loss was strongly positively correlated (correlation coefficient = 0.759, P < 0.01) with the GQL?15 score, while a weaker positive correlation was found with best corrected visual acuity (BCVA), cup disc ratio, and duration of treatment. Conclusion: Besides controlling or reducing intraocular pressure (IOP) to the target level, the goal of glaucoma treatment should be to provide an individual with good functional vision to maintain an acceptable quality of life. It would also help in providing patients with the best possible treatment, not only in terms of good vision but also in maintaining or improving their overall quality of life.
ABSTRACT
The objective is to determine which biopolymer has the best 3D printing characteristics and mechanical properties for the manufacture of a bioscaffold, using the fused deposition printing technique, with models generated from an STL file obtained from a Micro-CT scan taken from a bovine iliac crest bone structure. Through an experimental exploratory study, three study groups of the analyzed biopolymers were carried out with thirteen printed structures of each one. The first is made of 100% PLA. The second, 90B, we added 1g of diatom extract, and the third, 88C, differs from the previous one in that it also contains 1g of calcium phosphate. The 39 printed structures underwent a visual inspection test, which required the fabrication of a gold standard scaffold in resin, with greater detail and similarity to the scanned bone structure. Finally, the structures were subjected to a compressive force (N) to obtain the modulus of elasticity (MPa) and compressive strength (MPa) of each one of them. A statistically significant difference (p=0.001) was obtained in the printing properties of the biomaterial 88C, compared to 90B and pure PLA and the 88C presented the best 3D printing characteristics. In addition, it also presented the best mechanical properties compared to the other groups of materials. Although the difference between these was not statistically significant (p=0.388), in the structures of the 88C biomaterial, values of compressive strength (8,84692 MPa) and modulus of elasticity (43,23615 MPa) were similar to those of cancellous bone in the jaws could be observed. Because of this result, the 88C biomaterial has the potential to be used in the manufacture of bioscaffolds in tissue engineering.
El objetivo es determinar cuál biopolímero presenta las mejores características de impresión 3D y propiedades mecánicas para la fabricación de un bioandamiaje, utilizando la técnica de impresión por deposición fundida, con modelos generados a partir de un archivo en formato STL que se obtuvo de un Micro-CT Scan de una estructura osea de cresta iliaca bovina. Mediante un estudio exploratorio, se realizaron 3 grupos de estudio con trece estructuras impresas de cada uno. El primero, se compone 100% de PLA. El segundo, 90B, se le agrega 1g de extracto de diatomea, y el tercero, 88C, se diferencia del anterior ya que contiene además, 1g de fosfato de calcio. A las 39 estructuras impresas se les realizó una prueba de inspección visual, por lo que se requirió la confección de un patrón de oro en resina, con mayor detalle y similitud a la estructura ósea escaneada. Finalmente, las estructuras fueron sometidas a una fuerza compresiva (N) para la obtención del módulo de elasticidad (MPa) y de la resistencia compresiva (MPa) de cada una de ellas. Se obtuvo una diferencia estadísticamente significativa (p=0,001) en las propiedades de impresión del biomaterial 88C, con respecto al 90B y al PLA puro, presentando las mejores características de impresión 3D. Además, obtuvo las mejores propiedades mecánicas en comparación con los otros grupos de materiales. Aunque la diferencia entre estos no fue estadísticamente significativa (p=0,388), en las estructuras del biomaterial 88C, se pudieron observar valores de resistencia compresiva (8,84692 MPa) y módulo de elasticidad (43,23615 MPa) que son semejantes a los del hueso esponjoso de los maxilares. A razón de este resultado, el biomaterial 88C cuenta con el potencial para ser utilizado en la fabricación de bioandamiajes en la ingeniería tisular.
ABSTRACT
We present a case of post-trabeculectomy encapsulated dysesthetic bleb with scleral fistula, managed successfully with autograft. The child was operated on twice before for trabeculectomy, and intraocular pressure (IOP) recorded was in the normal range for the initial few years. This time child presented with a large encapsulated dysesthetic bleb with borderline IOP. As the IOP was on the lower side, an underlying scleral fistula was suspected and planned for bleb revision with a donor patch graft. We describe the novel technique of bleb revision along with the repair of the scleral fistula with an autologous free fibrotic Tenon’s tissue graft instead of a donor patch graft with a successful outcome.
ABSTRACT
Resumen El síndrome de heterotaxia es una entidad de baja prevalencia, que tiene su origen durante el desarrollo embrionario, que afecta a diversos órganos y sistemas. Es por ello que su diagnóstico representa un reto durante la gestación. El pronóstico dependerá principalmente de las malformaciones cardiacas asociadas. Se presenta el caso de un paciente con diagnóstico de síndrome de heterotaxia durante el primer trimestre. Se detallan los patrones ecográficos obtenidos durante el tamizaje del primer trimestre que auxiliaron a integrar el diagnóstico de esta entidad, así como las anomalías cardiacas asociadas. El manejo debe contemplar a un equipo multidisciplinario, el cual brinde un manejo oportuno, que será principalmente quirúrgico, enfocado en las malformaciones cardiacas.
Abstract Heterotaxy syndrome is a low prevalence entity, which originates during embryonic development, affecting diverse organs and systems. That is why its diagnosis represents a challenge during pregnancy. The prognosis depends mainly on the associated cardiac malformations. The case of a patient with a diagnosis of heterotaxy syndrome during the first trimester is presented. The ultrasound patterns obtained during the first trimester screening that helped to integrate the diagnosis of this entity are detailed, as well as the associated cardiac anomalies. Management must contemplate a multidisciplinary team, which provides timely management, which will be mainly surgical, focused on cardiac malformations.
ABSTRACT
La pérdida ósea en el sector anterior, ya sea por un defecto horizontal, vertical o combinado, actualmente es un desafío, no sólo por la integración del implante, sino por la estética involucrada. Entre las técnicas de regeneración ósea que permiten solucionar estos defectos, cabe destacar la técnica de expansión de crestas. Se presenta el caso de una paciente de 58 años con reborde atrófico, que se sometió a la expansión de crestas con colocación simultánea de implantes en sector anterior, con xenoinjerto previo a técnica de expansión de crestas con piezoeléctrico, colocación simultánea de implantes Narrow Connection SLActive Straumann. Se logró ganancia ósea y estabilidad primaria de los implantes, sin complicaciones. En escenarios seleccionados, la técnica de expansión de crestas de manera predecible permite ganancia de hueso horizontal adecuada, el éxito de los implantes con tasa de supervivencia y mínimas complicaciones intra y postoperatorias (AU)
Bone loss in the anterior sector, both a horizontal, vertical or combined defect is a challenge today; not only for the integration of the implant but also the aesthetic involved. There are techniques of bone regeneration that help us to solve this type of defects, among them we should highlight the crest expansion technique. We present the case of a 58-year-old patient with atrophic flange, who underwent the expansion of crests with simultaneous placement of implants in the anterior sector, with xenograft prior to the piezoelectric crest expansion technique, Simultaneous placement of Narrow Connection SLActive Straumann implants, bone gain and primary stability of the implants were obtained, without complications. In selected scenarios, the crest expansion technique could be considered a predictable approach that demonstrates a high implant survival rate, adequate horizontal bone gain, and minimal intra- and postoperative complications (AU)
Subject(s)
Humans , Female , Middle Aged , Dental Implantation, Endosseous/methods , Alveolar Ridge Augmentation/methods , Osteotomy/methods , Piezosurgery/methods , HeterograftsABSTRACT
Introducción: las cardiopatías congénitas constituyen defectos estructurales y/o funcionales del corazón y los grandes vasos, como consecuencia de un error en la embriogénesis de estas estructuras. Los defectos septales suelen ser las cardiopatías congénitas más frecuentes. Objetivo: identificar la asociación entre la morfología de las paredes ventriculares y los defectos septales en fetos humanos. Materiales y métodos: se realizó un estudio observacional, descriptivo y transversal en la Facultad de Ciencias Médicas de Pinar del Río Dr. Ernesto Guevara de la Serna y el Departamento de Anatomía Patológica del Hospital General Docente Abel Santamaría Cuadrado, en el período de enero de 2019 a diciembre de 2020, con 54 fetos producto de interrupciones de embarazo indicadas por genética. Resultados: predominaron los defectos de septación en el sexo masculino. La comunicación interventricular fue el defecto de septación más frecuente. El grosor del ventrículo derecho mostró diferencias lineales y estadísticas significativas en relación con la edad gestacional en los tres defectos estudiados. Similares características presentó el grosor del tabique interventricular en los defectos troncoconales. Conclusiones: ante la presencia de defectos septales se observan modificaciones del grosor de los tabiques cardiacos.
Introduction: congenital heart diseases are structural and/or functional defects of the heart and large vessels, as a consequence of an error in the embryogenesis of these structures. Septal defects are usually the most common congenital heart diseases. Objective: to identify the association between ventricular walls morphology and septal defects in human fetuses. Materials and methods: an observational, descriptive and cross-sectional study was carried out in the Medical Sciences Faculty of Pinar del Rio Dr. Ernesto Guevara de la Serna and the Department of Pathological Anatomy of the General Teaching Hospital Abel Santamaría Cuadrado, in the period from January 2019 to December 2020, with 54 fetuses resulting from pregnancy interruptions indicated by genetics Results: septation defects predominated in males. Interventricular communication was the most frequent septation defect. The thickness of the right ventricle showed significant linear and statistical differences in relation to gestational age in the three studied defects. Similar characteristics showed the thickness of the inter-ventricular septum in truncoconal defects. Conclusions: in the presence of septal defects, modifications of the heart septum thickness are observed.
ABSTRACT
Autologous serum eye drops provide lubrication and promote epithelial healing. They have been successfully used in the management of ocular surface disorders such as dry eye disease, persistent epithelial defects and neurotrophic keratopathy for many decades. A great deal of variation in the methods of preparation of autologous serum eye drops, the end concentration and the duration of use exists in published literature. In this review, simplified recommendations for preparation, transport, storage and use of autologous serum are described. Evidence for the use of this modality in aqueous deficient dry eye disease is summarized, along with expertise-based rationale.
ABSTRACT
Background: The aim of this meta-analysis was to compare the efficacy and adverse events of percutaneous occlusion among patients with sufficient and deficient rims. Methods: A systematic review of all articles published in the Pubmed, MEDLINE and Google Scholar databases was performed. Odds ratio (OR) and 95% CI were used as a measure of effect of the combination of studies. I2 with 95% CI was estimated to assess study heterogeneity. For the meta-analysis, a random effects model was used. Results: The systematic search identified ten studies which included 4355 patients; 2661 of those had sufficient rim and the remaining 1694 patients showed some rim deficiency. Implant failure rate was 4.13% CI 95% 3.53e4.72%. Compared to frequency of failures in the group with a deficient rim (5.43% CI 95% 4.35e6.50%), implant failure in patients with a sufficient rim was significantly lower (3.30% CI 95% 2.62e3.97%), OR 2.27 CI 1.34e3.83 (p 0.002). The combined adverse events were 5.19% CI 95% 4.22e6.35% vs 2.7% CI 95% 2.08e3.31% in the deficient vs sufficient rim groups respectively (OR 2.21 CI 0.93e5.29; p 0.07). Implant failures and adverse events were more frequent in patients with posterior inferior rim deficiency. Conclusion: Patients presenting a posteroinferior rim deficiency are associated to both, an increased incidence of closure failure and a combined adverse events occurrence. More studies on posterior rim deficiency are necessary to ensure the feasibility and safety of the percutaneous approach.
ABSTRACT
In the past decade, the rate of cesarean sections has doubled leading to the more frequent occurrence of cesarean-related complications. Cesarean scar site diverticulum or isthmocele is one such complication that is defined as an outpouching of the anterior uterine wall at the cesarean scar site in continuity with the endometrial cavity, creating a wedge-shaped defect of variable depth. We report a case of a middle-aged female with secondary infertility for the last 11 years with one live issue 12 years back through a cesarean section at term. She had undergone an array of investigations for infertility for the past 5 years. She was diagnosed as having an isthmocele and managed with surgical repair of the defect at our hospital with subsequent assisted conception 8-month post-surgical repair. The importance of diagnosing a cesarean scar diverticulum cannot be understated not only because it is a surgically treatable cause of infertility but also because if such patients conceive, they may land in uterine rupture, placenta accreta, or scar ectopic pregnancy which can complicate into life-threatening situations.