Restoration of a dental defect in a patient with ectodermal dysplasia: a case report and literature review / 口腔疾病防治

Objective@#To explore the treatment options for congenitally missing teeth in patients with ectodermal dysplasia and provide a clinical reference.@*Methods@#A patient with ectodermal dysplasia with a concave midface, anterior protrusion of the chin, and underdevelopment of the lower third of the face presented with congenital loss of multiple maxillary teeth, malocclusion of the remaining teeth, congenital loss of mandibular dentition, small dental arches, and upper and lower alveolar bone hypoplasia. The patient was treated by means of a removable partial maxillary prosthesis, implants in the anterior region of the lower mandible designed with the assistance of digital guides, and bar-clamped implant-overlay prostheses. A literature review of the protocol for the treatment of this condition was also conducted.@*Results@#In addition to good retention and stability after denture wear, an excellent occlusal relationship, improvement of the patient's facial appearance, including upper and lower lip fullness, more equal balancing of the lower and middle 1/3 of the face, and improved masticatory function were achieved. The results of the literature review showed that patients with ectodermal dysplasia who are congenitally edentulous usually have a complex intraoral situation that makes restoration difficult, and common restorative modalities for these patients include fixed bridges, removable partial dentures, complete dentures, overdentures, and implant prostheses, which need to be selected according to the actual intraoral situation of each patient. Currently, there is no consensus on the treatment of congenitally missing teeth in patients with ectodermal dysplasia, and some scholars have suggested that fixed restorations be recommended for patients with fewer missing teeth, while the option of removable or implant-covered denture restorations should be given to patients with more missing teeth, with removeable prostheses for underage patients that are replaced with permanent fixed prostheses when the jaws have stabilized.@*Conclusion@#In patients with ectodermal dysplasia with congenital tooth loss, all factors should be taken into account, and an individualized restorative plan should be developed.

A Case Report of Surgical Resection of Tuberous Sclerosis Complex Related Renal Giant Angiomyolipoma / 罕见病研究

Tuberous sclerosis complex (TSC) is an autosomal dominant hereditary disease that affects multiple organs and systems throughout the body. TSC-associated kidney disease is the leading cause of death in adult TSC patients. This article retrospectively analyzed the characteristics of one TSC-related renal giant angiomyolipoma(RAML)treated with surgery. The patient, 25 years old, was diagnosed with tuberous sclerosis complex in 2000 due to multiple maculopapular rashes on both cheeks. At a regular follow-up in July 2019, imaging examinations revealed a tumor in the left lower quadrant with a maximum cross-sectional area of 16 cm×7 cm. Genetic testing showed a loss of heterozygosity in the EX18_ 41 of TSC2. After the diagnosis was confirmed, open left partial nephrectomy was performed, during which multiple tumors were found on the kidney surface and the largest one was located on the ventral side with a diameter of approximately 20 cm. After the renal artery was occluded, kidney tumors were completely enucleate. Postoperative pathological confirmed the diagnosis of angiomyolipoma. This case provides a reference for the treatment of TSC-related renal giant hamartoma.

Digital repair for a patient with limited mouth opening: a case report and literature review / 口腔疾病防治

Objective@#To explore an accurate method to obtain an intraoral model of patients with specific limited mouth opening (microstomia) due to systemic scleroderma.@*Methods@#This study followed medical ethics, and informed consent has been obtained from patients. A case of Ken's Type I mandibular dentition defect scleroderma with limited mouth opening was addressed with digital technology as the leading method combined with the traditional impression method of segmental impression. Individual trays were made based on the patient's left and right mandibular dentition, and segmented molds were obtained. Simultaneously, intraoral scanning was performed to obtain the morphological data of both the soft and hard tissues of the upper and lower mandibles. After each part of the model was obtained, the mandibular model was scanned and digitally aligned to form the final denture model, and the final removable partial denture was designed and made by computer aided design/computer aided manufacturing (CAD/CAM) technology. At the same time, combined with the literature, the diagnosis and treatment of removable partial denture in patients with limited mouth opening were retrospectively analyzed.@*Results@#The denture was well retained and achieved a good repair effect. The patients expressed satisfaction with the mastication efficiency and other functions of the denture. The findings of the literature review show that the integration of digital technology with the traditional impression method, along with computer fitting, can accurately obtain the patient's oral model and facilitate successful follow-up repairs. However, when the anterior mandibular dentition of the patient is absent, the margin of error is increased in this procedure, which deserves further exploration.@*Conclusion@#Utilizing digital technology as the leading method, combined with the traditional impression method of segmental impression, for the repair of dental defects in patients with limited mouth opening, has proven to be effective. Thus, patients report a positive medical experience with high satisfaction, indicating that this approach is worthy of clinical promotion.

Comprehensive analysis of insulin products complex disulfide bonds structure by high resolution mass spectrum / 药学学报

The correct pairing of disulfide bonds maintains the correct folding mode and high-level structure formation of peptides and protein drugs, which is crucial for the quality control of products. In order to ensure that the disulfide bonds are correctly paired, disulfide bond analysis is an essential part of peptides and protein drug characterization. Mass spectrometry can be used to analyze disulfide bonds. However, insulin and its analogues have two pairs of disulfide bonds without restriction enzyme cutting site. Conventional collision-induced dissociation (CID) and high-energy induced cleavage (HCD) cannot accurately locate the complex disulfide bond. In our study, three methods were used to localize the complex disulfide, including enzyme digestion combined with key peptide fragment in source decay (ISD) fragmentation method, enzyme digestion combined with partial reduction alkylation method, intact protein source ISD and electron transfer dissociation (ETD) cleavage method, The applicability of insulin aspart, insulin lispro and insulin glargine were also investigated. This study provides a new way for the quality control of disulfide bonding mode of insulin and its analogues, and also provides a reference for the disulfide bond localization of peptides or proteins containing this complex disulfide bond.

Diagnosis and treatment of the portal vein complications for children undergoing spilt liver transplantation / 器官移植

Objective To investigate the diagnosis and treatment strategy of the portal vein complications in children undergoing split liver transplantation. Methods The clinical data of 88 pediatric recipients who underwent split liver transplantation were retrospectively analyzed. Intraoperative anastomosis at the bifurcating site of the portal vein or donor iliac vein bypass anastomosis was performed depending on the internal diameter and development of the recipient's portal vein. A normalized portal venous blood stream monitoring was performed during the perioperative stage. After operation, heparin sodium was used to bridge warfarin for anticoagulation therapy. After portal vein stenosis or thrombosis was identified with enhanced CT or portography, managements including embolectomy, systemic anticoagulation, interventional thrombus removal, balloon dilatation and/or stenting were performed. Results Among the 88 recipients, a total of 10 children were diagnosed with portal vein complications, of which 4 cases were diagnosed with portal vein stenosis at 1 d, 2 months, 8 months, and 11 months after surgery, and 6 cases were diagnosed with portal vein thrombosis at intraoperative, 2 d, 3 d (n=2), 6 d, and 11 months after surgery, respectively. One patient with portal vein stenosis and one patient with portal vein thrombosis died perioperatively. The fatality related to portal vein complications was 2% (2/88). Of the remaining 8 patients, 1 underwent systemic anticoagulation, 2 underwent portal venous embolectomy, 1 underwent interventional balloon dilatation, and 4 underwent interventional balloon dilatation plus stenting. No portal venous related symptoms were detected during postoperative long term follow up, and the retested portal venous blood stream parameters were normal. Conclusions The normalized intra- and post-operative portal venous blood stream monitoring is a useful tool for the early detection of portal vein complications, the early utilization of useful managements such as intraoperative portal venous embolectomy, interventional balloon dilatation and stenting may effectively treat the portal vein complications, thus minimizing the portal vein complication related graft loss and recipient death.

Clinical application of lithium disilicate glass ceramic cantilever resin-bonded fixed partial denture in the restoration of single anterior tooth loss / 口腔疾病防治

Objective@#To investigate the clinical effect of lithium disilicate glass ceramic cantilever resin-bonded fixed partial dentures (CRBFPDs) on single anterior tooth loss to provide a reference for the selection of restoration methods for single anterior tooth loss.@*Methods@#This study was reviewed and approved by the Ethics Committee, and informed consent was obtained from the patients. Forty-two patients with less than two anterior teeth with monomaxillary loss were included in this study. After 6 months, 1 year, 2 years, and 3 years, the aesthetic and functional effects of the restorations and the periodontal health status were evaluated, and the visual analog scale (VAS) was used to assess patient satisfaction.@*Results@#During the observation period, the connector fractured in one case within 3 months. One case had debonded within 2 years. The aesthetic restoration effect of all lithium disilicate glass ceramic CRBFPDs was categorized as Class A. The periodontal health was good, there was no clinical absorption in the soft and hard tissues of the abutment or subbridge, periodontal status according to the evaluation indices was classified as class A, and the total satisfaction rate of the patient was 100%.@*Conclusion@#For single anterior tooth loss patients, lithium disilicate glass ceramic cantilever resin-bonded fixed partial denture can achieve the restoration effect of less invasion, better adhesion, aesthetics, comfort and good biocompatibility. With high patient satisfaction, it can be considered an ideal restoration method for replacing a single anterior tooth.

Identification of Dalbergia odorifera and Its Counterfeits by HS-GC-MS / 中国实验方剂学杂志

ObjectiveTo screen the differential markers by analyzing volatile components in Dalbergia odorifera and its counterfeits， in order to provide reference for authentication of D. odorifera. MethodThe volatile components in D. odorifera and its counterfeits were detected by headspace gas chromatography-mass spectrometry（HS-GC-MS）， and the GC conditions were heated by procedure（the initial temperature of the column was 50 ℃， the retention time was 1 min， and then the temperature was raised to 300 ℃ at 10 ℃ for 10 min）， the carrier gas was helium， and the flow rate was 1.0 mL·min-1， the split ratio was 10∶1， and the injection volume was 1 mL. The MS conditions used electron bombardment ionization（EI） with the scanning range of m/z 35-550. The compound species were identified by database matching， the relative content of each component was calculated by the peak area normalization method， and principal component analysis（PCA）， orthogonal partial least squares-discrimination analysis（OPLS-DA） and cluster analysis were performed on the detection results by SIMCA 14.1 software， and the differential components of D. odorifera and its counterfeits were screened out according to the variable importance in the projection（VIP） value>2 and P<0.05. ResultA total of 26， 17， 8， 22， 24 and 7 volatile components were identified from D. odorifera， D. bariensis， D. latifolia， D. benthamii， D. pinnata and D. cochinchinensis， respectively. Among them， there were 11 unique volatile components of D. odorifera， 6 unique volatile components of D. bariensis， 3 unique volatile components of D. latifolia， 6 unique volatile components of D. benthamii， 8 unique volatile components of D. pinnata， 4 unique volatile components of D. cochinchinensis. The PCA results showed that， except for D. latifolia and D. cochinchinensis， which could not be clearly distinguished， D. odorifera and other counterfeits could be distributed in a certain area， respectively. The OPLS-DA results showed that D. odorifera and its five counterfeits were clustered into one group each， indicating significant differences in volatile components between D. odorifera and its counterfeits. Finally， a total of 31 differential markers of volatile components between D. odoriferae and its counterfeits were screened. ConclusionHS-GC-MS combined with SIMCA 14.1 software can systematically elucidate the volatile differential components between D. odorifera and its counterfeits， which is suitable for rapid identification of them.

Sobrevivência em fadiga de coroas bioinspiradas bilaminadas: estudo in vitro / Fatigue survival rate of bioinspired bilaminar crowns: in vitro study

O objetivo deste estudo foi avaliar o comportamento biomecânico através da resistência à fadiga e análise por elementos finitos de coroas bioinspiradas bilaminadas com infraestruturas modificadas na superfície vestibular (Estudo A) e utilizando diferentes materiais cerâmicos com módulos elásticos distintos (Estudo B). Para isso, foram confeccionados 90 preparos para coroa total em resina epóxi G10, sobre os quais foram preparadas coroas bioinspiradas de acordo com os seguintes grupos: Estudo A - IC (infraestrutura convencional), IME (infraestrutura modificada estratificada) e IMC (infraestrutura modificada cimentada), todas confeccionadas em dissilicato de lítio (infraestrutura) + porcelana (recobrimento); Estudo B ­ DL+LEU (dissilicato de lítio + leucita), LEU+DL (leucita + dissilicato de lítio), CH+DL (cerâmica híbrida + dissilicato de lítio) e CH+LEU (cerâmica híbrida + leucita). Para o Estudo A, todas as infraestruturas foram usinadas; os recobrimentos dos grupos IC e IME foram confeccionados através da estratificação, e os recobrimentos do grupo IMC foram usinados. Já para o Estudo B, todas as peças foram usinadas, de acordo com o material cerâmico de cada grupo. Em seguida, foi realizada a cimentação adesiva dos recobrimentos sobre as infraestruturas (a depender do grupo) e das coroas sobre os preparos utilizando cimento resinoso fotopolimerizável (Variolink Esthetic LC). Após a cimentação, os espécimes foram submetidos ao teste de fadiga cíclica (10.000 ciclos, 20Hz), e como desfecho foram considerados dois eventos, em que o primeiro foi a ocorrência de trinca e/ou lascamento (evento 1) e o segundo foi a falha catastrófica do conjunto (evento 2). Os valores de carga e número de ciclos para falha em que foram observados os eventos 1 e 2 foram utilizados para realizar a análise de sobrevivência de acordo com Kaplan-Meier e Log-Rank (Mantel-Cox; 95%). As marcas de fratura e o modo de falha das coroas foram avaliados e classificados por estereomicroscópio óptico e microscópio eletrônico de varredura. Por fim, foi realizada análise por elementos finitos (FEA) para ambos os estudos, a fim de avaliar a distribuição de tensões sobre as coroas e interface adesiva. Para o Estudo A, os resultados do teste de fadiga mostraram que, considerando o evento 1 (trinca/lascamento), os grupos IC e IMC apresentaram médias de carga fadiga estatisticamente significantes entre si (733,33 N e 913,33 N, respectivamente), enquanto o grupo IME apresentou média superior (1.020 N). O mesmo foi observado para o número de ciclos em fadiga para todos os grupos. Ao considerar o evento 2 (falha catastrófica), os três grupos apresentaram médias estatisticamente semelhantes entre si (~1.028 N). Os resultados de FEA mostraram que o grupo IC concentrou maior tensão de tração do que os grupos IME e IMC. Para o Estudo B, no teste de fadiga, o grupo DL+LEU apresentou a maior média de resistência à fadiga (evento 1: 913,33 N e evento 2: 1033,33 N), enquanto todas as outras combinações de materiais cerâmicos analisadas foram estatisticamente semelhantes entre si, considerando carga e número de ciclos. Com relação ao FEA, os grupos com cerâmica híbrida (CH+DL e CH+LEU) apresentaram menores picos de concentração de tensão na infraestrutura do que os grupos com cerâmicas vítreas (DL+LEU e LEU+DL), porém, em contrapartida, concentraram maior tensão na interface adesiva. Com isso, conclui-se que a utilização da infraestrutura modificada é uma alternativa viável e promissora para tratamentos reabilitadores, apresentando sobrevivência em fadiga e distribuição de tensões satisfatórias. Além disso, a combinação entre uma infraestrutura de dissilicato de lítio e recobrimento de cerâmica a base de leucita corresponde a melhor abordagem considerando a infraestrutura modificada.(AU)

The objective of this study was to evaluate the biomechanical behavior through fatigue resistance and finite element analysis of bilaminar bioinspired crowns with modified infrastructures on the buccal surface (Study A) and using different ceramic materials with different elastic moduli (Study B). For this, 90 preparations were made for a full crown in G10 epoxy resin, on which bioinspired crowns were prepared according to the following groups: Study A - CI (conventional infrastructure), SMI (stratified modified infrastructure) and CMI (cemented modified infrastructure ), all made of lithium disilicate (infrastructure) + porcelain (veneer); Study B ­ LD+LEU (lithium disilicate + leucite), LEU+LD (leucite + lithium disilicate), HC+LD (hybrid ceramic + lithium disilicate) and HC+LEU (hybrid ceramic + leucite). For Study A, all infrastructures were machined; the coverings of the CI and SMI groups were made through stratification technique, and the veneers of the SMI group were machined. For Study B, all pieces were machined, according to the ceramic material of each group. Then, the veneers were cemented into their infrastructures (depending on the group) and crowns were cemented into preparations using light-cured resin cement (Variolink Esthetic LC). After cementing, the specimens were subjected to the cyclic fatigue test (10,000 cycles, 20Hz), and as an outcome two events were considered: the occurrence of cracking and/or chipping (event 1) and catastrophic failure (event 2). The load (N) and number of cycles to failure in which events 1 and 2 were observed were used to perform the survival analysis according to Kaplan-Meier and Log-Rank (Mantel- Cox; 95%). The fracture marks and failure mode of the crowns were evaluated and classified by optical stereomicroscope and scanning electron microscope. Finally, finite element analysis (FEA) was performed for both studies in order to evaluate the stress distribution over the crowns and adhesive interface. For Study A, the results of the fatigue test showed that, considering event 1 (cracking/chipping), the CI and CMI groups presented average to failure that were statistically significant compared to each other (733.33 N and 913.33 N, respectively), while the SMI group showed higher averages (1,020 N). Same pattern was observed for the number of cycles under fatigue for both groups. When considering event 2 (catastrophic failure), the three groups presented statistically similar means (~1,028 N). The FEA results showed that the CI group concentrated greater tensile stress than the CMI and SMI groups. For Study B, in the fatigue test, the LC+LEU group presented the highest average fatigue resistance (event 1: 913.33 N and event 2: 1033.33 N), while all other combinations of ceramic materials analyzed were statistically similar to each other, considering load and number of cycles. Regarding FEA, the groups with hybrid ceramics (HC+LC and HC+LEU) showed lower stress concentration peaks in the infrastructure than the groups with glass ceramics (LC+LEU and LEU+LC), however, on the other hand, concentrated greater tension at the adhesive interface. With this, it is concluded that the use of modified infrastructure is a viable and promising alternative for oral rehabilitation treatments, presenting satisfactory fatigue survival and adequate stress distribution. Furthermore, the combination of a lithium disilicate infrastructure and a leucite-based ceramic coating corresponds to the best approach considering the modified infrastructure.(AU)

Comparación de prótesis removibles parciales y totales entregadas según sus características clínicas en el servicio de odontología del hospital nacional de geriatría y gerontología, en el período de tiempo comprendido del 1 de enero 2005 al 31 de diciembre del 2008 / Comparison of partial and total removable prosthesis delivered according to their clinical characteristics in the dentistry service of the national hospital of geriatry and gerontology, in the period under january 1 of 2005 to december 31 of 2008

RESUMEN Objetivo: Comparar la cantidad y características de las prótesis dentales removibles parciales y totales, en el servicio de odontología del Hospital Nacional de Geriatría y Gerontología, en el periodo de tiempo comprendido del 1 de enero 2005 al 31 de diciembre 2008, equivalentes a 326 expedientes. Se tomó la base de datos del servicio de odontología de consulta externa especializada de los pacientes atendidos de los años 2005 al 2008, en los cuales se entregaron un total de 2786 prótesis dentales removibles. Materiales y métodos: Con base en el dato anterior se seleccionó la muestra no aleatoria a conveniencia hasta alcanzar el tamaño de 599 prótesis entregadas, examinando 326 expedientes del periodo de enero del 2005 a diciembre del 2008, con un nivel de confianza de 99% y un error de muestreo de 0.0466. La recolección de datos se realizó por medio del programa Microsoft Excel donde se utilizó una tabla en la que se anotó el número de expediente, fecha de inicio y conclusión de prótesis, tipo de prótesis, cantidad y color de prótesis, edad, género y domicilio del paciente por distrito, cantón y provincia. El procesamiento se realizó por medio de estadística descriptiva utilizando cuadros y gráficos. Resultados: Se determinó que el mayor porcentaje de rango de edad de personas que solicitaron prótesis removibles fue de 62 a 65 años, independiente si eran prótesis totales o parciales, los pacientes que requirieron dos prótesis fueron 273 de 326, en su mayoría los pacientes solicitaron prótesis totales para un total de 372 de 599 prótesis entregadas. De la guía de color utilizada en el HRBC los colores más requeridos fueron los tonos claros blanco amarillentos que corresponde al número 62 y 65; de los expedientes analizados la mayoría de los pacientes residían en San José con un total de 200 pacientes. Se concluye que el mayor porcentaje de edentulismo que se presento es el edentulismo total con un 62%, la prótesis más utilizada es la prótesis total superior removible y en su mayoría los pacientes requieren dos prótesis, con respecto al color no es concluyente para este estudio debido a los datos no disponibles en los expedientes analizados.

ABSTRACT Objective: Compare the quantity and characteristics of partial and total removable dental prostheses, in the dentistry service of the National Hospital of Geriatrics and Gerontology, in the period from January 1, 2005 to December 31, 2008. The database of the specialized outpatient dentistry service of the patients treated from 2005 to 2008 was taken, in which a total of 2786 removable dentures were delivered. Materials and methods: Based on the previous data, the non-random sample was selected for convenience until reaching the size of 599 protheses of 326 files, with a confidence level of 99% and a sampling error of 0.0466. Data collection was carried out through the Microsoft Excel program where a table was used in which the file number, date of start and conclusion of the prosthesis, type of prosthesis, amount and color of prosthesis, age, gender and address were used of the patient by district, canton and province. The processing was carried out by means of descriptive statistics using tables and graphs. Results: It was determined that the highest percentage of the age range of people who requested removable prostheses was 62 to 65 years, the patients that required two prostheses were 273 of 326. In their majority, the patients requested total prostheses for a total of 372 of 599 prostheses delivered. Of the color guide used in the HRBC, the most requested colors were the light yellowish-white tones corresponding to the number 62 and 65; of the files analyzed, most of the patients resided in San José with a total of 200 patients. Conclusion: It is concluded that the highest percentage of edentulism that is presented is total edentulism with 62%, the most commonly used prosthesis is the removable upper total prosthesis and for the most part patients require two prostheses, with respect to color it is inconclusive for this study due to data not available in the analyzed files.

Reabilitação oral com próteses parciais removíveis após restabelecimento de dimensão vertical de oclusão e tratamento multidisciplinar: relato de caso / Oral rehabilitation with removable partial dentures after restoration of the vertical dimension of occlusion and multidisciplinary treatment: case report

As próteses parciais removíveis (PPRs) são uma alternativa de tratamento viável na prática clínica para reabilitar arcos parcialmente desdentados. Entretanto, o planejamento dessas próteses e preparo bucal prévio são frequentemente negligenciados. O presente artigo tem como objetivo relatar o caso clínico de uma reabilitação oral com PPRs superior e inferior após abordagem multidisciplinar, de modo a enfatizar as fases de um planejamento criterioso e de preparo prévio dos dentes pilares, visando o sucesso e a longevidade da reabilitação. Paciente do sexo masculino de 57 anos de idade compareceu à clínica da Faculdade de Odontologia de Bauru, Universidade de São Paulo, queixando-se da estética de seu sorriso e de algumas ausências dentárias. O indivíduo utilizava uma PPR provisória inferior insatisfatória e apresentava perda de dimensão vertical de oclusão (DVO). Após o exame clínico, radiográfico e estudo do caso em articulador semi-ajustável, realizou-se o planejamento com abordagens restauradoras, endodônticas, periodontais e protéticas. Após tratamento periodontal, foi realizada endodontia dos elementos 12, 15 e 47, confecção de núcleos e coroas nos dentes 12 e 15, restauração a nível gengival para apoio residual no dente 47, restaurações nos dentes 11, 13, 22, 24 e 44 e, por fim, a confecção das PPRs superior e inferior. A abordagem multidisciplinar utilizada neste caso clínico viabilizou o restabelecimento da DVO e possibilitou o sucesso da reabilitação protética(AU)

Removable partial dentures (RPDs) are a viable treatment alternative in clinical practice to rehabilitate partially edentulous arches. However, the planning of these dentures and prior oral preparation are often neglected. This article aims to report the clinical case of an oral rehabilitation with upper and lower RPDs after a multidisciplinary approach, to emphasize the phases of careful planning and prior preparation of the abutment teeth, aiming at the success and longevity of the rehabilitation. A 57-year-old male patient came to the clinic of the Bauru School of Dentistry, University of São Paulo, complaining about the esthetics of his smile and some missing teeth. The subject was using an unsatisfactory lower provisional prosthesis and had a loss of vertical dimension of occlusion (OVD). After the clinical and radiographic examination and the case study in a semi-adjustable articulator, planning was carried out with restorative, endodontic, periodontal and prosthetic approaches. After periodontal treatment, endodontics were performed on elements 12, 15 and 47, creation of cores and crowns on teeth 12 and 15, restoration at the gingival level for residual support on tooth 47, restorations on teeth 11, 13, 22, 24 and 44 and, finally, the making of the upper and lower PPRs. The multidisciplinary approach used in this clinical case enabled the restoration of the OVD and enabled the success of the oral rehabilitation(AU)

Surgical treatment of temporal lobe epilepsy: comparative results of selective amygdalohippocampectomy versus anterior temporal lobectomy from a referral center in Brazil / Tratamento cirúrgico da epilepsia do lobo temporal: resultados comparativos da amigdalohipocampectomia seletiva versus lobectomia temporal anterior em um centro de referência no Brasil

Abstract Background Temporal lobe epilepsy (TLE) is a high prevalence neurological disorder. Surgery has emerged as a promising treatment. Objective The objective of this work is to compare the surgical results of anterior temporal lobectomy (ATL) versus selective amygdalohippocampectomy (SAH) in a cohort of 132 patients. Methods We performed a retrospective study of 146 patients operated for TLE from 2008 to 2019. Initially, 13 patients were excluded from the study due to insufficient medical record data or follow-up loss. One patient was excluded from the analysis of the results due to death in the first postoperative week. We used the ILAE scale to classify seizure control after surgery. In patients with left hippocampal sclerosis, SAH was performed and in right temporal lobe epilepsy, ATL was the approach of choice. Results The mean follow-up time after surgery was 57.2 months (12-137). In our data analysis, we found that the group of patients undergoing ATL had a higher prevalence of being completely seizure-free (ILAE I) (57.1% versus 31%) and a higher rate of satisfactory seizure control (88.6% versus 69.3%) p = 0,006, when compared with patients undergoing SAH. Conclusions The literature is still controversial about seizure control concerning the technique used due to the lack of a robust methodology. Our data analysis identified the superiority of ATL over SAH in seizure outcomes. ATL may be the best option for adequately controlling seizures with minimal additional morbidity in countries with a cost limitation for extended propaedeutics.

Resumo Antecedentes A epilepsia do lobo temporal (TLE) é uma desordem neurológica de alta prevalência. A cirurgia surgiu como um tratamento promissor. Objetivo O objetivo deste trabalho é comparar os resultados da lobectomia temporal anterior (ATL) versus amigdalohipocampectomia seletiva (SAH) em uma coorte de 132 pacientes. Métodos Realizamos um estudo retrospectivo de 146 pacientes operados por TLE de 2008 a 2019. Inicialmente, 13 pacientes foram excluídos por insuficiência de dados em prontuário ou perda de seguimento. Um paciente foi excluído da análise por óbito na primeira semana de pós-operatório. Usamos a escala ILAE para classificar o controle das crises após a cirurgia. Em pacientes com esclerose hipocampal à esquerda, foi realizada a SAH, e na epilepsia do lobo temporal à direita, a ATL foi a abordagem de escolha. Resultados O tempo médio de seguimento após a cirurgia foi de 57,2 meses (12-137). Em nossa avaliação, encontramos que o grupo de pacientes submetidos à ATL apresentou maior prevalência de ausência total de crises (ILAE I) (57,1% versus 31%) e maior taxa de controle satisfatório da epilepsia (88,6% versus 69,3%) p = 0,006, quando comparado ao grupo submetido à SAH. Resultados A literatura ainda é controversa em relação à redução das crises de acordo com a técnica utilizada devido a falta de uma metodologia robusta. Nosso estudo identificou superioridade da ATL sobre a SAH nos desfechos convulsivos. ATL pode ser a melhor opção para controlar adequadamente as convulsões com morbidade adicional mínima em países com limitação de custo para propedêutica estendida.

Cantidad y características de prótesis dentales parciales removibles en comparación con las totales removibles, realizadas en el Servicio de Odontología del Hospital Nacional de Geriatría y Gerontología, en el periodo comprendido de enero 2015 a diciembre 2018 / Quantity and characteristics of removable partial dental prostheses compared to removable total dental prostheses, performed in the dentistry service of the National Hospital of Geriatrics and Gerontology, in the period of time from January 2015 to December 2018

Objetivo: Analizar el número de prótesis totales en relación a las parciales entregadas en el Servicio de Odontología del Hospital Nacional de Geriatría y Gerontología, en el periodo comprendido de enero 2015 a diciembre 2018". El Servicio de Odontología del HNGG tiene como prestación de servicio la confección de prótesis dentales a escala nacional. El fin de este estudio es comparar y analizar el número de prótesis totales en relación con las parciales entregadas en el Servicio de Odontología del Hospital Nacional de Geriatría y Gerontología, en el periodo comprendido de enero 2015 a diciembre 2018. Metodología: El número de prótesis estudiadas fue de 9.170. El estudio es no experimental, transeccional descriptivo, retrospectivo, donde se observan situaciones no manipulables, basándose en los registros oficiales del laboratorio y clínica dentales. Resultados: 60% de prótesis totales y 40% de prótesis parciales removibles y 50% color A2, 44% color A1 y 6% color A3. Discusión: En este centro se están realizando más prótesis totales que parciales, poniendo en evidencia el deterioro de la salud oral en la población adulta mayor. Resultados principales: Características de las prótesis realizadas por el Servicio de Odontología del Hospital Nacional de Geriatría y Gerontología fueron: 60% de prótesis totales y 40% de prótesis parciales removibles y 50% color A2, 44% color A1 y 6% color A3. Conclusiones principales: Actualmente se está realizando mayor cantidad de prótesis dentales totales removibles que prótesis parciales removibles en un promedio de 60% a 40%. Los colores más solicitados por los pacientes son los tonos blancos.

To analyze the number of total prostheses in relation to the partial ones delivered in the dentistry service of the National Hospital of Geriatrics and Gerontology, in the period of time from January 2015 to December 2018 ". The dental service of the HNGG has the service of making dental prostheses nationwide. The purpose of this study is to compare and analyze the number of total prostheses in relation to the partial ones delivered in the dentistry service of the National Hospital of Geriatrics and Gerontology, in the period of time from January 2015 to December 2018. Methodology: The number of studied prostheses were 9,170 dental prostheses. The study is non-experimental, descriptive transectional, retrospective, where non-manipulable situations are observed, based on the official records of the dental laboratory and clinic. Results: 60% of total dentures and 40% of removable partial dentures and 50% color A2, 44% color A1 and 6% color A3. Discussion: In this center, more total prostheses are being performed than partial ones, highlighting the deterioration of oral health in the older adult population. Main results Characteristics of the prostheses made by the dentistry service of the National Hospital of Geriatrics and Gerontology were: 60% of total prostheses and 40% of removable partial prostheses and 50% color A2, 44% color A1 and 6% color A3. Main conclusions Currently, more total removable dentures are being made tan removable partial dentures, an average of 60% to 40%. Being the color most requested by patients the colors of white tones.

Invitro Comparative Analysis of the Flexural Strength of 4 Different Commercially Available Provisional Materials Used in Fixed Partial Dentures – An Original Research

Background: Provisional Prosthesis in fixed partial dentures are subjected to Flexure under stress. Selection of appropriate material for fabrication of Provisional is of utmost importance as the Provisional prosthesis has to remain in function till definitive prosthesis is delivered. Material & Methods: Bar type specimens of four different commercially available brands for provisional restorations fabricated according to ADA specification No. 27 and immersed in artificial saliva. The specimens were fractured under 3-point loading test. Results: The flexural strength ranged between 60 to 110 Mpa. BisGMA Auto polymerizing composite resin from Dentsply Caulk shows the highest flexural strength. Conclusion: Within the limitations of this study, the flexural strengths were material specific rather than category one. The BisGMA composite based resin shows significantly higher flexural strength over other materials

Correlation of Venous to Arterial Carbon Dioxide Partial Pressure Difference with other Cardiac Output Indices in Patients Undergoing Intracardiac Repair for Tetralogy of Fallot

Background: Clearance of tissue carbon dioxide by circulation is measured by venous to arterial carbon dioxide partial pressure difference (AVCO2 ) and is correlated with cardiac output (CO) in critically ill adult patients. This study aimed to correlate AVCO2 with other CO indices like arteriovenous oxygen saturation difference (AVO2 ), central venous oxygen saturation (ScVO2 ), and serum lactate in pediatric patients undergoing intracardiac repair (ICR) for tetralogy of Fallot (TOF). Methods: We conducted a prospective observational study in 50 patients, of age 5months to 5 years, undergoing ICR for TOF and analyzed AVO2 , AVCO2 , ScVO2 , and lactate from arterial and venous blood gas pairs obtained at different time intervals from admission to pediatric intensive care unit(PICU)(T0 ), at 6 h (T1 ), 12 h (T2 ), 24 h (T3 ), and 48 h (T4 ) postoperatively. Bivariate correlations were analyzed using Pearson for parametric variables. Results: Admission AVCO2 was not correlated with AVO2 (R2 = 0.166, P = 0.246), ScVO2 (R2 = ?2.2, P = 0.124), and lactate (R2 = ?0.07, P = 0.624). At T1 , AVCO2 was correlated with AVO2 (R2 = 0.283, P = 0.0464) but not with ScVO2 (R2 = ? 0.25, P = 0.079) and lactate (R2 = ?0.07, P = 0.623). At T2 , T3 and T4 , AVCO2 was correlated with AVO2 (R2 = 0.338,0.440 & 0.318, P = 0.0162, 0.0013, and 0.024), ScVO2 (R2 = ? 0.344, ? 0.488, and ?0.366; P = 0.0143, <0.0001, and 0.017), and lactate (R2 = 0.305, 0.467 and 0.607; P = 0.0314, 0.00062 and <0.0001). AVCO2 was negatively correlated with ScVO2 . No correlation observed between admission AVCO2 and mechanical ventilation duration. Two nonsurvivors had higher value of admission AVCO2 compared to survivors. Conclusion: AVCO2 is correlated with other CO surrogates like AVO2 , ScVO2 , and lactate in pediatric patients undergoing ICR for TOF.

Evaluación preoperatoria de la hemostasia en cirugía mayor electiva / Preoperative evaluation of hemostasis in elective major surgery

Resumen: Introducción: Las pruebas de coagulación carecen de valor para determinar el riesgo de sangrado perioperatorio. Material y métodos: Se realizó un estudio observacional, descriptivo, y transversal en 2,114 pacientes en la consulta de Anestesiología del Hospital Universitario «Dr. Celestino Hernández Robau¼, los resultados se evaluaron mediante estadística descriptiva. Resultados: El tiempo de coagulación y sangrado se realizó en 100% de los casos y el conteo de plaquetas en 93.99%, mientras que el tiempo de protrombina y tiempo de tromboplastina parcial activado se efectuó en 66.27 y 55.62% de los casos respectivamente. De 8.834 exámenes realizados se encontraron 49 alterados en 0.55%. Los pacientes con exámenes alterados fueron 33 en 1.56%, los enfermos en riesgo de sangrado por exámenes de coagulación fueron 30 en 1.42% y los pacientes en riesgo sin antecedentes de sangrados detectados por exámenes de coagulación fueron tres en 0.14%. Se reportó sangrado perioperatorio en 16 pacientes en 0.76%, siete pacientes con interrogatorio positivo y exámenes normales y nueve pacientes con interrogatorio negativo y exámenes normales. Conclusiones: La historia clínica y el examen físico del paciente son las mejores herramientas para predecir el riesgo de sangrado quirúrgico y los exámenes aislados de coagulación no constituyen un buen predictor del sangrado perioperatorio.

Abstract: Introduction: Coagulation tests are no value to determine the risk of perioperative bleeding. Material and methods: An observational descriptive cross-sectional study was carried out in 2,114 patients in the anesthesiology consultation of the University Hospital «Dr. Celestino Hernández Robau¼. Results: The clotting and bleeding time was performed in 100% of cases, the platels count in 93.99%. While the prothrombin time and activated partial tromboplastin time were performed in 66.27 and 55.62% respectively. Of 8,834 tests carried out, 49 were found to be altered for 0.55%. Patients with altered tests were for 1.56%, patients at risk of bleeding from coagulation tests were 30 for 1.42% and patients at risk with no history of bleeding detected by coagulation tests were three for 0.14%. Perioperative bleeding was reported in 16 patients for 0.76%, seven patients with positive questioning and normal tests and nine patients with negative questioning and normal tests. Conclusions: The patient's medical history and physical examination are the best tools to predict the risk of surgical bleeding and isolated coagulation tests do not constitute a good predictor of perioperative bleeding.

Evaluation of Haemostatic Effects of Petroselinum crispum(Parsley) in Wistar Rats

Petroselinum crispum(parsley or garden parsley), besides its use as an edible vegetable, is used in the treatment of various ailments with documented evidence validating some of these medicinal uses. The present study evaluates the impact of oral administration of P. crispumon blood coagulation parameters. Fresh leaves of P. crispum were locally sourced, authenticated and extracted using ethanol to obtain an ethanolic extract of P. crispum (PCE). Twenty-five (25) male Wistar rats were used for the study and were randomly assigned to five (5) animals of five (5) rats each. Group I served as the control group and was given distilled water, whereas groups II, III, and IV were treated as experimental groups and administered PCE at 200, 400, and 800mg/kg via oral gavage, respectively. Group V also received 800mg/kg of PCE with the administration terminated on the 28thday to allow for a 14-day recovery period. Platelet count (PLT) and other platelet indices were determined using an automated Haematology analyzer. Bleeding time (BT), clotting time (CT), prothrombin time (PT), activated partial thromboplastin time (aPTT) and plasma fibrinogen (FIB) were assayed following standard laboratory protocols. The results of the study show that the mean PLT were significantly reduced in the experimental animals compared to the control (p<0.05) while BT, CT, PT, aPTT and FIB significantly increased compared to the control (p<0.05). Also, BT, CT, PT, and aPTT recovered towards the control values after the 14-day withdrawal period. The present study shows ethanolic leaf extract of P. crispumprolonged blood coagulation. The current evidence suggests that P. crispumcould be a candidate for further exploration as a natural plant-based antithrombotic agent.

Uso de prótesis parcial removible con resina acrílica termoplástica: una revisión de literatura

La prótesis parcial removible (PPR) es una alternativa de tratamiento en pacientes que perdieron algunos elementos dentarios, debido al costo relativamente bajo y a la generación de una función masticatoria satisfactoria. Además, es una buena opción cuando hay pérdida de los tejidos óseos, dado que impide la instalación de implantes dentarios. La PPR convencional presenta una estructura metálica que ofrece retención y resistencia a la prótesis, convirtiéndola en poco agradable a los pacientes, por el hecho de dejar a la vista el metal en la cavidad oral. A partir de investigadores que decidieron ir más allá del simple estudio de la función y la estética de las PPR para adentrase en sus diversas formas de presentación, surgió la prótesis parcial flexible (PFlex). La PFlex es una prótesis parcial confeccionada con resina termoplástica, sin metal y con flexibilidad. Si bien, muchos profesionales la emplean como prótesis temporal, otros tantos la han usado como alternativa a la PPR convencional. Así, uno de los frecuentes interrogantes de los clínicos es si realmente es posible utilizar la PFlex como alternativa protética definitiva. Por tanto, el propósito de este trabajo fue realizar una revisión de la literatura para evaluar si el uso de prótesis parciales removibles con resina termoplástica puede ser una alternativa a las prótesis parciales convencionales, exponiendo las ventajas, desventajas, indicaciones, contraindicaciones y las propiedades del material protético.

Removable partial denture (RPP) is an alternative treatment when it comes to patients who have lost some dental elements, as they have the advantages of a relatively low cost and a satisfactory masticatory function. Furthermore, it is a good option when there is bone tissue loss, making dental implants placement unfeasible. Conventional PPR has a metallic frame that provides retention and resistance to the prosthesis, which makes it unpalatable to patients because it leaves the metal in the oral cavity evident. Many researchers, aiming to give back beyond function and aesthetics, are studying forms of presentation of PPR, thus emerging the flexible partial prosthesis (PFlex). PFlex is a partial denture made with thermoplastic, resin metal-free and with flexibility, however its use, for many professionals, is limited only as temporary prostheses, but there are some clinicians who use PFlex as an alternative to conventional PPR. Thus, one of the questions constantly asked by scientists is whether it is possible to use PFlex as a definitive prosthetic alternative. Therefore, the aim of this study was to conduct a literature review to assess whether the use of removable partial dentures with thermoplastic resin can be an alternative to conventional partial dentures, exposing the advantages, disadvantages, indications, contraindications, and the properties of the prosthetic material.

Desarrollo y aplicación de un software educativo bidimensional para el proceso de enseñanza del diseño de Prótesis Parcial Removible / Validation of a two-dimensional educational software for the learning process of the design of Removable Partial Dentures

Objetivo: El objetivo de este estudio fue desarrollar e implementar un software educativo bidimensional para el proceso de aprendizaje del diseño de Prótesis Parciales Removibles.Materiales y métodos: Se utilizó el método científico y procedimientos de evaluación educativa para abordar las necesidades de la asignatura de Prótesis Parcial Removible en la Facultad de Odontología de la UNMSM de Perú en el año 2022. Se utilizó análisis, síntesis y encuestas. Se examinó la aplicabilidad del software y el cumplimiento de los requerimientos de enseñanza y aprendizaje, no sólo en la UNMSM sino en cualquier universidad con requerimientos y características similares. Resultados: La aplicación in-terna del software arrojó un valor final del 96%, mientras que la evaluación de alumnos y docentes mostró un 90% de aceptación, al considerar que el SEDUPPR es sencillo para instalar, sencillo en su manejo y funcionamiento, y es muy útil para aprender diseño de PPR. Conclusiones: El software educativo bidimensional diseñado para el proceso de aprendizaje de Prótesis Parcial Removible es aplicable y puede ser implementado en diferentes ámbitos educativos.

Objective: The objective of this study was to develop and implement a two-dimensional educational software for the learning process of designing Removable Partial Prostheses.Materials and Methods: The scientific method and educational evaluation procedures were utilized to address the needs of the Removable Partial Prosthesis subject in the Fa-culty of Dentistry at the UNMSM in Peru in 2022. Analysis, synthesis, and surveys were used. The software's applicability and fulfillment of teaching and learning requirements were examined, not only at the UNMSM but also in any university with similar require-ments and characteristics. Results: The internal application of the software yielded a final value of 96%, while the evaluation of students and teachers showed a 90% acceptance rate, considering that SEDUPPR is simple to install, easy to use and operate, and is very useful for learn PPR design. Conclusion: The two-dimensional educational software designed for the learning process of Removable Partial Prosthesis is applicable and can be implemented in different educational settings.

Restricción parcial de flujo sanguíneo con resistencia, fundamento fisiológico y metodología de entrenamiento

El entrenamiento con restricción del flujo sanguíneo ha resultado ser una alternativa que logra resultados similares a los conseguidos por el entrenamiento de alta intensidad. El presente artículo ofrece el resultado de una investigación, en la que se realizó una revisión bibliográfica para indagar sobre la efectividad en el aumento de fuerza muscular, así como analizar los mecanismos de acción y metodología de aplicación práctica, mediante el método de restricción parcial de flujo sanguíneo con resistencia a bajas cargas. La literatura revisada respalda los efectos positivos de este método para generar hipertrofia y aumento de fuerza muscular, tanto en población sana como en periodo de rehabilitación. Los principales mecanismos propuestos como mediadores de esta adaptación son la elevación en la secreción de hormona del crecimiento, la señalización intracelular vía anabólica y catabólica y la contribución de procesos inflamatorios o edematosos. Se recomendó trabajar con cargas entre el 20 al 40 % de una repetición máxima y con un volumen de 75 repeticiones por sesión con entrenamiento entre 2 a 4 veces por semana, durante un tiempo mínimo de tres semanas. Se discutió sobre los efectos en la adaptación neurológica, sin existir evidencia que lo respalde. Se concluyó que el método de restricción parcial del flujo sanguíneo genera aumento de fuerza e hipertrofia y se recomienda como método complementario y alternativo al ejercicio de alta intensidad, en poblaciones que necesariamente se ven imposibilitadas de entrenar a altas intensidades.

SÍNTESE O treinamento com restrição do fluxo sanguíneo provou ser uma alternativa que alcança resultados similares aos alcançados pelo treinamento de alta intensidade. Este artigo oferece o resultado de uma pesquisa, na qual foi realizada uma revisão de literatura para investigar a eficácia no aumento da força muscular, bem como para analisar os mecanismos de ação e metodologia de aplicação prática, utilizando o método de restrição parcial do fluxo sanguíneo com resistência a cargas baixas. A literatura revisada apóia os efeitos positivos deste método para gerar hipertrofia e aumentar a força muscular, tanto na população saudável quanto no período de reabilitação. Os principais mecanismos propostos como mediadores desta adaptação são a elevada secreção hormonal de crescimento, a sinalização intracelular através de vias anabólicas e catabólicas e a contribuição de processos inflamatórios ou edematosos. Foi recomendado trabalhar com cargas entre 20 a 40% de uma repetição máxima e com um volume de 75 repetições por sessão com treinamento entre 2 a 4 vezes por semana, por um tempo mínimo de três semanas. Os efeitos sobre a adaptação neurológica foram discutidos, mas não há evidências que sustentem isto. Concluiu-se que o método de restrição parcial do fluxo sanguíneo gera maior força e hipertrofia e é recomendado como um método complementar e alternativo ao exercício de alta intensidade, em populações que são necessariamente incapazes de treinar em altas intensidades.

Blood flow restriction training has turned out to be an alternative that achieves results similar to those achieved by high intensity training. The present article offers the result of a research where, a bibliographical review was carried out to inquire about the effectiveness in increasing muscle strength, as well as to analyze the mechanisms of action and methodology of practical application, through the method of partial restriction of blood flow with endurance to low loads. The reviewed literature supports the positive effects of this method to generate hypertrophy and increase muscle strength, both in the healthy population and in the rehabilitation period. The main mechanisms proposed as mediators of this adaptation are increased secretion of growth hormone, intracellular signaling via anabolic and catabolic pathways, and the contribution of inflammatory or edematous processes. It was recommended to work with loads between 20 and 40 % of a maximum repetition and with a volume of 75 repetitions per session with training between 2 and 4 times a week, for a minimum of three weeks. The effects on neurological adaptation were discussed, without supporting evidence. It was concluded that the method of partial restriction of blood flow generates an increase in strength and hypertrophy and is recommended as a complementary and alternative method to high intensity exercise, in populations that are necessarily unable to train at high intensities.

Cambios en parámetros masticatorios con prótesis parcial removible para dientes posteriores perdidos / Changes in masticatory parameters with removable partial dentures for missing posterior teeth

Introducción: el reemplazo de dientes perdidos aspira a mejorar la función masticatoria. Aunque hay diferentes opciones para ello, la conveniencia de la prótesis parcial removible (PPR) es su bajo costo. Objetivo: comparar el desempeño masticatorio (DM) después de 20 ciclos masticatorios y al umbral de la deglución (UD) en adultos de 50 a 70 años con dientes posteriores perdidos (DPP), con/sin PPR; y los ciclos hasta la deglución. Material y métodos: estudio transversal en 35 adultos con dientes anteriores y PPR bien ajustadas y utilizadas para comer. El lado de prueba fue el lado con más DPP. El DM se evaluó después de 20 ciclos y al UD utilizando un alimento prueba artificial (Optosil Comfort®) con/sin la PPR en orden aleatorizado. Las partículas se tamizaron para determinar el tamaño medio de partícula (TMP) como medida del DM. Los ciclos se contaron visualmente. Estadística descriptiva y comparaciones con SPSS-v23. Resultados: hubo diferencias significativas (p ≤ 0.05) al masticar con/sin PPR. El TMP fue más pequeño (mejor DM) con la PPR después de 20 ciclos y al UD (3.9 vs 4.4 mm y 3.2 vs 4.2 mm). Los ciclos para llegar al UD disminuyeron con la PPR (40 vs 47). Conclusión: a pesar de una mejora limitada de la función masticatoria, las PPR ayudan a preparar los alimentos en partículas más pequeñas antes de deglutirlas. La mejoría en DM con PPR es de 24% al UD, realizando menos ciclos antes de deglutir sus alimentos (AU)

Introduction: replacement of missing teeth should improve masticatory function. Although there are different options removable partial dentures (RPD) are used due to their lower cost. Objective: to compare masticatory performance (MP) after 20 chewing-cycles and swallowing-threshold (ST) in 50-70 year-old adults with missing posterior teeth (MPT) with and without their cast-metal RPD; chewing cycles until swallowing were also compared. Material and methods: 35 adults participated in this cross-sectional study. Subjects with anterior teeth and welladjusted RPDs, used for eating were included. The side with more MPT was selected as the test side. MP was evaluated after 20 cycles and ST using an artificial test-food (Optosil Comfort®) with/without the RPD (subject-own-control) (randomized order). Chewed particles were sieved to determine medium-particle-size (MPS) as a measure of MP. Chewing cycles were visually counted. Descriptive statistics and comparisons were run with SPSS v23. Results: there were significant differences (p ≤ 0.05) for all parameters when chewing with/without the RPD. MPS was smaller (better MP) with the RPD (3.9 vs 4.4 mm and 3.2 vs 4.2 mm) after 20 cycles and ST respectively. Cycles required to reach ST were less when chewing with the denture (40 vs 47). Conclusion: despite a limited improvement of masticatory function RPDs help patients prepare their food into smaller particles before swallowing. Improvement in MP with RPDs for patients with MPT is 24% at ST and they perform fewer chewing cycles before swallowing food (AU)