Antibacterial, chemical and physical properties of sealants with polyhexamethylene guanidine hydrochloride

Abstract The aim of this study was to evaluate the influence of polyhexamethylene guanidine hydrochloride (PHMGH) in the physico-chemical properties and antibacterial activity of an experimental resin sealant. An experimental resin sealant was formulated with 60 wt.% of bisphenol A glycol dimethacrylate and 40 wt.% of triethylene glycol dimethacrylate with a photoinitiator/co-initiator system. PHMGH was added at 0.5 (G0.5%), 1 (G1%), and 2 (G2%) wt.% and one group remained without PHMGH, used as control (GCTRL). The resin sealants were analyzed for degree of conversion (DC), Knoop hardness (KHN), and softening in solvent (ΔKHN), ultimate tensile strength (UTS), contact angle (θ) with water or α-bromonaphthalene, surface free energy (SFE), and antibacterial activity against Streptococcus mutans for biofilm formation and planktonic bacteria. There was no significant difference for DC (p > 0.05). The initial Knoop hardness ranged from 17.30 (±0.50) to 19.50 (± 0.45), with lower value for GCTRL (p < 0.05). All groups presented lower KHN after immersion in solvent (p < 0.05). The ΔKHN ranged from 47.22 (± 4.30) to 57.22 (± 5.42)%, without significant difference (p > 0.05). The UTS ranged from 54.72 (± 11.05) MPa to 60.46 (± 6.50) MPa, with lower value for G2% (p < 0.05). PHMGH groups presented no significant difference compared to GCTRL in θ (p > 0.05). G2% showed no difference in SFE compared to GCTRL (p > 0.05). The groups with PHMGH presented antibacterial activity against biofilm and planktonic bacteria, with higher antibacterial activity for higher PHMGH incorporation (p < 0.05). PHMGH provided antibacterial activity for all resin sealant groups and the addition up to 1 wt.% showed reliable physico-chemical properties, maintaining the caries-protective effect of the resin sealant over time.

Comparison of different methods for total RNA extraction from sclerotia of Rhizoctonia solani

Background Rhizoctonia solani (teleomorph: Thanatephorus cucumeris) is one of the most important pathogens of rice (Oryza sativa L.) that causes severe yield losses in all rice-growing regions. Sclerotia, formed from the aggregation of hyphae, are important structures in the life cycles of R. solani and contain a large quantity of polysaccharides, lipids, proteins and pigments. In order to extract high-quality total RNA from the sclerotia of R. solani, five methods, including E.Z.N.A.™ Fungal RNA Kit, sodium dodecyl sulfate (SDS)-sodium borate, SDS-polyvinylpyrrolidone (PVP), guanidinium thiocyanate (GTC) and modified Trizol, were compared in this study. Results The electrophoresis results showed that it failed to extract total RNA from the sclerotia using modified Trizol method, whereas it could extract total RNA from the sclerotia using other four methods. Further experiments confirmed that the total RNA extracted using SDS-sodium borate, SDS-PVP and E.Z.N.A.™ Fungal RNA Kit methods could be used for RT-PCR of the specific amplification of GAPDH gene fragments, and that extracted using GTC method did not fulfill the requirement for above-mentioned RT-PCR experiment. Conclusion It is concluded that SDS-sodium borate and SDS-PVP methods were the better ones for the extraction of high-quality total RNA that could be used for future gene cloning and expression studies, whereas E.Z.N.A.™ Fungal RNA Kit was not taken into consideration when deal with a large quantity of samples because it is expensive and relatively low yield.

Modified TRIzol method for RNA and DNA co-extraction from blood / 法医学杂志

OBJECTIVE@#To establish a new method for RNA and DNA co-extraction from the same sample by TRIzol reagent.@*METHODS@#After the aqueous phase which contained total RNA was removed by traditional TRIzol method, the values of pH of the interphase phase and organic phase were adjusted. The DNA was precipitated with ethanol and purified with DNA IQ system. The purified DNA was measured in quality and quantity. As the template, it was amplified and typed by PCR-STR. The data was compared with that extracted by traditional TRIzol method.@*RESULTS@#The DNA extracted by this modified method showed a better result of quality and quantity than that by traditional TRIzol method and a good STR typing.@*CONCLUSION@#The modified TRIzol method is advisable and reliable to simultaneously extract both DNA and RNA from the same sample. It could be used for individual identification and paternity testing to satisfy the need of forensic science.

Rapid extraction of DNA from diverse soils by guanidine thiocyanate method.

Molecular methods are being frequently used for the study of soil microbial communities as majority of naturally occurring microbial populations are non-culturable. In the present study, we describe a protocol of DNA extraction from diverse soils using a combination of heat, enzyme (lysozyme) and guanidine thiocyanate. The efficacy of the procedure was evaluated in terms of yield, purity and duration of extraction. The protocol was effective for neutral, acidic as well as alkaline soils (pH range 4.5-8.5). The extracted soil DNA was observed with negligible shearing on agarose gel and the time taken for restriction digestion was very less. Further, the DNA extracted was almost completely devoid of contaminants and pure enough which could be used for PCR amplification and Southern hybridization.

Reactions of 5-bromo-6-methoxy-5,6-dihydrouridine and its 2-thioanalogue with both of some guanidines and mercapto acrylicacid derivatives

5-bromo-6-methoxy-5,6-dihydrouridine and its 2-thioanalogue were allowed to react with some substituted guanidine tautomers and alpha- mercapto-beta-phenylacrylic acid. The products are 5,6-cyclized derivatives of both of uridine and 2-thiouridine

Interaction of guanidine hydrochloride and guanidine thiocyanate with wheat germ lipase.

Effect of two classical and potent denaturants, guanidine hydrochloride (GuHCl) and guanidine thiocyanate (GuHSCN) on purified wheat germ lipase has been studied. Lipase was found to be active only up to 5 M GuHCl and 1.5 M GuHSCN. The extent of interaction was determined by the measurement of apparent partial specific volume of the enzyme in presence of these two denaturants. While the preferential interaction parameter (zeta 3) has values of 0.08 +/- 0.02 and 0.14 +/- 0.03 g/g, the interaction parameter (delta m3/delta m2)T,mu 1, mu3 has values of 35 +/- 9 and 50 +/- 10 mole/mole for GuHCl and GuHSCN, respectively. The number of denaturant molecules bound to the enzyme, A3, obtained experimentally were 0.486 +/- 0.020 and 0.348 +/- 0.020 g/g and the calculated values were 0.459 +/- 0.023 and 0.567 +/- 0.030 g/g for 6 M GuHCl and 3 M GuHSCN, respectively. The volume change occurring upon denaturation results in -420 +/- 42 and -462 +/- 84 ml/mole in 6 M GuHCl and 3 M GuHSCN, respectively. The denaturation is accompanied by exposure of hydrophobic groups to the bulk solvent as confirmed by fluorescence emission measurements of the enzyme. The Tm measurements indicated a control value of 56 +/- 1 degree C. In presence of 6 M GuHCl/3 M GuHSCN, the value was 42 +/- 1 degree C. These results explain the retention of lipase activity even at 5 M GuHCl from a mechanistic point of view.

Analgesic and hypnosis potentiation effect of some 1-(2-benzothiazolyl)-1-aryl-3-phenyl-4-aryl guanidines.

1-(2-benzothiazolyl)-1-aryl-3-phenyl-4-arylguanidines (I-X) were prepared by oxidation of 1,3-diarylthioureas. The compounds were screened for their analgesic and hypnotic activities in rats. Of these, p-methyl group substituted compound of the series was the most potent analgesic as compared to other compounds of the series. In hypnotic test all the compounds potentiated pentobarbitone-induced hypnosis.