Percepción estética de la posición anteroposterior de los incisivos superiores en relación con la frente / Esthetic perception of the anteroposterior position of upper incisors in relation to the forehead

RESUMEN Introducción: El tratamiento ortodóntico tiene como objetivos fundamentales el logro de relaciones oclusales estables y la mejora en la expresión de la sonrisa. Particularmente, la posición de los incisivos centrales superiores presenta un rol importante en esta expresión y se ha sugerido el uso de referencias extracraneales para su correcta posición tridimensional. Conocer las preferencias de los distintos actores sociales respecto a este factor puede ayudar a las decisiones en la planificación de los tratamientos. Objetivo: Evaluar la percepción estética que ortodoncistas, cirujanos dentistas y personas no expertas tienen de la sonrisa con el incisivo central superior en posición anteroposterior respecto a la frente y en norma lateral. Métodos: Se empleó una fotografía en norma lateral en sonrisa de una mujer peruana con perfil normal y posición anteroposterior del incisivo central superior ideal según el elemento II de la armonía orofacial de Andrews. La fotografía fue modificada digitalmente de tal forma que se obtuvieron imágenes con los incisivos retruídos (- 4 mm) y protruidos (+ 4 mm). Las fotografías fueron evaluadas por un panel conformado por ortodoncistas, cirujanos dentistas y personas no expertas. La evaluación se realizó a través de una escala visual análoga. Resultados: La fotografía con la posición normal del incisivo central superior con respecto a la línea GALL fue mejor valorada por los ortodoncistas (67,658 ± 22,094) y por los no expertos (54,038 ± 20,524). Los cirujanos dentistas consideraron más agradable la posición protruida (60,804 ± 3,626). Se encontraron diferencias significativas entre los grupos de evaluadores y las fotografías (p < 0,05). Conclusiones: Los ortodoncistas mostraron una valoración de la estética más cercana a la norma para la posición anteroposterior de los incisivos. La posición anteroposterior de los incisivos juega un rol importante en la percepción de la estética de la sonrisa en norma lateral(AU)

ABSTRACT Introduction: Orthodontic treatment is mainly aimed at achieving stable occlusal relationships and enhancing the smile expression. The position of the upper central incisors plays a particularly important role in such an expression, and extracranial references have been suggested for its proper three-dimensional position. Awareness of the preferences of the various social actors involved may be useful to make appropriate decisions when planning the treatments. Objective: Evaluate the esthetic perception that orthodontists, dental surgeons and laypeople have of the smile with the upper central incisor in anteroposterior position with respect to the forehead and in lateral norm. Methods: A lateral norm photograph was used of a Peruvian woman with a normal profile and ideal anteroposterior position of the upper central incisor according to element II of Andrews' orofacial harmony. The photograph was digitally modified to obtain images with retruding (- 4 mm) and protruding (+ 4 mm) incisors. The photographs were evaluated by a panel composed of orthodontists, dental surgeons and laypeople. The evaluation was based on a visual analog scale. Results: The photograph with normal position of the upper central incisor with respect to the GALL line was ranked higher by orthodontists (67.658 ± 22.094) and laypeople (54.038 ± 20.524). To dental surgeons the protruded position was nicer (60.804 ± 3.626). Significant differences were found between the groups of evaluators and the photographs (p < 0.05). Conclusions: The esthetic appraisal of orthodontists was closer to the norm for anteroposterior position of incisors. The anteroposterior position of incisors plays an important role in the esthetic perception of the smile in the lateral norm(AU)

Relationship between cervical vertebral maturation and dental development in a sample of yemeni children and adolescents / Relación entre la maduración vertebral cervical y el desarrollo dental en una muestra de niños y adolescentes yemeníes

Objective: This study was conducted to investigate the relationship between dental development and cervical vertebral maturation stages in a group of Yemeni children and adolescents. Materials an Methods: The study included digital panoramic radiographs and lateral skull cephalograms obtained from 207 Yemeni subjects­122 females and 85 males aged between 8 to 18 years. Dental maturity was evaluated according to the method of Demirijian et al., calcification stages of the left mandibular canines, first and second premolars and second molars were assessed. Skeletal maturity was assessed by the cervical vertebral maturation (CVM) stages according to the method of Baccetti et al. Correlation between CVM and dental maturation was evaluated by Spearman rank-order correlation coefficient (SROCC). Results: CVM and dental calcification stages were highly correlated (p<0.001) in both genders, ranging from 0.686 to 0.873 for females and 0.787 to 0.871 for males. Calcification stages of the second molars showed the strongest correlation with CVM. Conclusion: Calcification stages of the second molar may be used as a reliable maturation indicator. Dental maturation may be applied to determine the skeletal maturity status of Yemeni children and adolescents.

Objetivo: Este estudio se realizó para investigar la relación entre el desarrollo dental y las etapas de maduración vertebral cervical en un grupo de niños y adolescentes yemeníes. Material y Métodos: El estudio incluyó radiografías panorámicas digitales y cefalogramas laterales del cráneo obtenidos de 207 sujetos yemeníes: 122 mujeres y 85 hombres de entre 8 y 18 años. La madurez dental se evaluó de acuerdo con el método de Demirijian et al. Se evaluaron las etapas de calcificación de los caninos mandibulares izquierdos, primer y segundo premolares y segundos molares. La madurez esquelética se evaluó mediante las etapas de maduración vertebral cervical (CVM) de acuerdo con el método de Baccetti et al. La correlación entre la CVM y la maduración dental se evaluó mediante el coeficiente de correlación de orden de rango de Spearman (SROCC). Resultado: Las etapas de CVM y calcificación dental estuvieron altamente correlacionadas (p<0.001) en ambos sexos, con un rango de 0.686 a 0.873 para las mujeres y 0.787 a 0.871 para los hombres. Las etapas de calcificación de los segundos molares mostraron la correlación más fuerte con CVM. Conclusión: las etapas de calcificación del segundo molar pueden usarse como un indicador de maduración confiable. La maduración dental puede aplicarse para determinar el estado de madurez esquelética de los niños y adolescentes yemeníes.

Stress analysis of maxillary central incisors endodontically -treated with varying ferrule heights and three different post dowel materials - a finite element analysis / Análisis de tensión de los incisivos centrales superiores tratados endodónticamente con diferentes alturas de férula y tres materiales diferentes de clavija posterior: un análisis de elementos finitos

Statement of problem : fracture of endodontically treated teeth is reduced by the use of a post with ferrule, but the effect of different ferrule configurations and dowel materials is not clear. Purpose: to evaluate the effect of ferrules with different configurations and heights on the stress of endodontically treated teeth restored with three different post and dowel materials. Materials and Methods: fifteen models of maxillary central incisors restored with porcelain fused to metal crowns were obtained using pro engineer software. the models were divided into three groups, each consisting of five models with ferrule heights of 0mm, 2mm, 4mm, 2mm with oblique fracture, 4mm with oblique fracture, the models under group GFR were restored with fiberglass reinforced post (GFR) and composite core build-up, group NiCr with a custom cast post metal alloy (NiCr), and group Zr with zirconia post (Zr) and composite core build-up. an oblique load of 100N and 150N at an angle of 135 degrees was applied to the palatal surface of the tooth, a vertical load of 100N and 150N at an angle of 90 degrees was applied to the incisal tip of the tooth. The maximum principal stress and the von mises stress was calculated for the remaining tooth structure and post apex using the finite element analysis (FEA) software. Results: the maximum von misses stress was observed in the apex of the post (p<0.05). Group Zr showed the highest mean stress (6.39Mpa) followed by group NiCr (5.65Mpa). There was a significant difference between post and between NiCr and Zr post for 2mm and 4mm ferrule height, while for 0mm ferrule there was a significant difference between the GFR and NiCr groups (p<0.05). Under oblique load, the maximum mean stress was observed in remaining tooth structures while for vertical load, it was observed at the apex of the post. Regarding ferrule heights, there were significant differences between 0mm-2mm, and 0mm-4mm uniform ferrule in post apex in the case of NiCr posts (p<0.05). Absence of ferrule resulted in higher stress for the NiCr group. Conclusion: higher loads that led to fracture were observed only at the apex of the post. Zirconia posts (group Zr) had higher fracture loads, whereas absence of ferrule resulted in higher fracture load with custom cast posts (group NiCr). Fracture thresholds were high on the remaining tooth structure for all the dowel systems especially for composite core build up irrespective of ferrule height and configuration. Clinical implications: appropriate selection of post and dowel materials in different configurations of ferrule heights ensures clinical success.

Indicación del problema: la fractura de los dientes tratados endodónticamente se reduce mediante el uso de un poste con férula, pero el efecto de diferentes configuraciones de férula y materiales de clavija no está claro. Propósito: evaluar el efecto de los casquillos con diferentes configuraciones y alturas sobre el estrés de los dientes tratados endodónticamente restaurados con tres materiales diferentes de postes y tacos. materiales y métodos: quince modelos de incisivos centrales superiores restaurados con porcelana fundida a coronas de metal se obtuvieron con el software Pro Engineer. Los modelos se dividieron en tres grupos, cada uno de los cuales consta de cinco modelos con alturas de casquillo de 0mm, 2mm, 4mm, 2mm con fractura oblicua, 4mm con fractura oblicua. los modelos del grupo GFR fueron restaurados con poste reforzado con fibra de vidrio (GFR) y acumulación de núcleo compuesto, grupo nicr con una aleación de metal de poste fundido personalizado (NiCr) y grupo Zr con poste de zirconia (Zr) y acumulación de núcleo compuesto. se aplicó una carga oblicua de 100N y 150N en un ángulo de 135º a la superficie palatina del diente. se aplicó una carga vertical de 100N y 150N en un ángulo de 90º a la punta incisal del diente. la tensión principal máxima y la tensión de von mises se calcularon para la estructura dental restante y después del vértice utilizando el software de análisis de elementos finitos (FEA). Resultados: el estrés máximo de von falta se observó en el vértice de la publicación (p<0.05). El grupo Zr mostró el mayor estrés medio (6.39Mpa) seguido del grupo NiCr (5.65Mpa). Hubo una diferencia significativa entre la publicación NiCr y Zr para la altura de la férula de 2mm y 4mm, mientras que para la férula de 0mm hubo una diferencia significativa entre los grupos GFR y NiCr (p<0,05), bajo la carga oblicua, la tensión media máxima en las estructuras dentales restantes, mientras que para la carga vertical, se observó en el vértice del poste. En cuanto a las alturas de la férula, hubo diferencias significativas entre la férula uniforme de 0mm-2mm y de 0mm-4mm en el post-apex en el caso de los postes de NiCr (p<0.05), la ausencia de férula dio como resultado un mayor estrés para el grupo NiCr. Conclusión: las cargas más altas que llevaron a la fractura se observaron solo en el vértice del poste; Los postes de zirconia (grupo Zr) tuvieron mayores cargas de fractura, mientras que la ausencia de férula dio como resultado una mayor carga de fractura con postes moldeados personalizados (NiCr de grupo). Los umbrales de fractura fueron altos en la estructura dental restante para todos los sistemas de clavijas, especialmente para la acumulación de núcleos compuestos independientemente de la altura y configuración de la férula. Implicaciones clínicas: la selección adecuada de materiales de postes y tacos en diferentes configuraciones de alturas de férulas asegura el éxito clínico.

Maxillary dentoalveolar assessment following retraction of maxillary incisors: a preliminary study

ABSTRACT Objective: The aim of this preliminary study was to assess changes in tooth length and alveolar thickness following retraction of maxillary incisors. Methods: A total of 11 patients presenting severe maxillary dentoalveolar protrusion revealed by initial (T1) cone-beam computed tomography (CBCT), and whose treatment plan included extraction of maxillary first premolars and retraction of maxillary incisors, were selected and submitted to CBCT examination one month after the end of incisors retraction (T2). The premaxilla was assessed through seven axial slices by means of Dolphin ImagingTM software. In each of these slices, five measurements of the distance from the buccal cortical bone to the palatal cortical bone were performed. Tooth length of maxillary incisors (n = 44) was also measured in sagittal slices. Measurements were repeated after a two-week interval, and intraclass correlation coefficient (ICC) was used to test examiner calibration. Wilcoxon test was used to detect differences in measurements performed at the two time intervals. Results: The ICC was satisfactory for tooth length (0.890) and for premaxilla alveolar thickness measurements (0.980). Analysis of data showed no statistically significant differences (p > 0.05) in tooth length or alveolar thickness between the two-time intervals assessed. Conclusion: The force used in retraction of maxillary incisors in this research did not promote significant changes in tooth length of maxillary incisors or in premaxilla alveolar thickness.

RESUMO Objetivo: o objetivo deste estudo preliminar foi avaliar as alterações no comprimento dentário e na espessura alveolar durante a retração dos incisivos superiores. Métodos: um total de 11 pacientes apresentando protrusão dentoalveolar severa, de acordo com a tomografia computadorizada de feixe cônico (TCFC) inicial (T1), e que continham no seu plano de tratamento extração dos pré-molares superiores e retração dos incisivos superiores, foram selecionados e submetidos a exames de TCFC um mês após o término da retração dos incisivos (T2). Com o auxílio do software Dolphin Imaging(r), a prémaxila foi dividida em sete cortes axiais. Em cada corte axial, foram realizadas cinco medições da distância da cortical vestibular a lingual. O comprimento dos incisivos superiores (n = 44) foi medido no corte sagital. As medições foram refeitas após o intervalo de duas semanas e o coeficiente de correlação intraclasse (ICC) foi utilizado para avaliar a calibração do examinador. Utilizou-se o teste de Wilcoxon para detectar diferenças nas medições realizadas nos dois intervalos de tempo. Resultados: o ICC mostrou-se satisfatório tanto para o comprimento dentário (0,890) quanto para a espessura alveolar da pré-maxila (0,980). Não foram observadas diferenças estatísticas significativas para comprimento dentário e para as espessuras alveolares (p < 0,05) nos períodos avaliados. Conclusões: as forças atuantes na retração dos incisivos, nessa pesquisa, não provocaram alterações significativas no comprimento dentário dos incisivos superiores, nem mudanças na espessura alveolar da pré-maxila.

Evaluation of the force applied by the tongue and lip on the maxillary central incisor tooth

PURPOSE: To describe the development and testing of a system that measures forces exerted by the tongue and upper lip on a tooth during rest and during swallowing. METHODS: Twenty-eight subjects, aged 19-31 years (mean: 23.2 years) were submitted to measurement of forces exerted by the upper lip and tongue on the maxillary right central incisor tooth. Flexiforce resistive sensors were fixed on the labial and lingual surfaces of the tooth. They were connected to an amplifier circuit and a data acquisition board for processing and transmitting information to a computer. RESULTS: At rest, the tongue force on the tooth was 0.00±0.00 N and the lip force on tooth was 0.02±0.02 N. The difference between them was significant. During swallowing, the values were 0.31±0.38 N and 0.15±0.14 N, for the tongue and lip, respectively. This difference was not significant. CONCLUSION: At rest, the lip exerts a larger force than the tongue on the maxillary right central incisor tooth. During swallowing, there was no difference between lip and tongue force on the tooth. .

Segmented arch or continuous arch technique? A rational approach

This study aims at revising the biomechanical principles of the segmented archwire technique as well as describing the clinical conditions in which the rational use of scientific biomechanics is essential to optimize orthodontic treatment and reduce the side effects produced by the straight wire technique.

O objetivo desse trabalho é revisar os princípios biomecânicos da técnica do arco segmentado, bem como descrever situações clínicas onde o uso racional da biomecânica científica é fundamental na otimização do tratamento ortodôntico e eliminação dos efeitos colaterais da abordagem com arco contínuo.

Traumatismo dentário em adolescentes entre 15 e 19 anos na cidade do Recife / PE e fatores associados - estudo preliminar / Traumatic tooth injuries and associated factors in adolescents aged 15 to 19 years in Recife/PE/Brazil - a preliminary study

Objetivo: avaliar a prevalência de traumatismo dentário e fatores associados em adolescentes de 15 a 19 anos da cidade do Recife/PE. Metodologia: a amostra foi composta por 148 adolescentes de ambos os sexos. Os dados foram coletados por meio de exames clínicos e entrevistas realizadas nos intervalos das aulas. Os testes Qui-quadrado de Pearson e Exato de Fisher foram utilizados para verificar a associação entre as variáveis. O nível de significância utilizado foi de 5%. A prevalência encontrada foi de aproximadamente 15%. Resultados: os dentes mais afetados foram os incisivos centrais superiores. A maioria dos adolescentes apresentou um único dente atingido por trauma. As principais causas de trauma dental foram: brincando com outras pessoas (45,5%) e quedas (18,2%). Não houve associação entre a presença de traumatismo dental e overjet acentuado e/ou cobertura labial inadequada. Não foi observada diferença estatística entre prevalência de traumatismo e o sexo dos adolescentes. O tipo de escola não foi associado à presença de traumatismo.Conclusão: a prevalência de traumatismo dental em adolescentes de 15 a 19 anos de idade da cidade do Recife foi relativamente alta, porém não foi observada associação entre overjet e cobertura labial...

Objective: To evaluate the prevalence of traumatic tooth injuries and associated factors in Adolescents aged 15 to 19 years in the city of Recife, PE, Brazil. Method: The sample consisted of 148 adolescents of both genders. Data were collected by clinical examinations and interviews conductedbetween classes. Pearson?s chi-square and Fisher?s exact tests were used to assess the association among the variables. The significance level was set at 5%. The prevalence was approximately 15%. Results: The most affected teeth were the maxillary central incisors. Most adolescents had a single hit tooth trauma. The main causes of dental trauma were playing with someone (45.5%) and falls (18.2%). There was no association between dental trauma and severe overjetand/or inadequate lip coverage. There was no statistically significant difference (p>0.05) between the prevalence of trauma and gender of the adolescents. The type of school was not associated with the presence of traumatic tooth injuries. Conclusion: The prevalence of dental trauma in adolescents aged 15 to 19 years in Recife was relatively high, but no association was foundbetween overjet and lip coverage...

Apical stress distribution on maxillary central incisor during various orthodontic tooth movements by varying cemental and two different periodontal ligament thicknesses: A FEM study.

Context: During fixed orthodontic therapy, when the stress levels in the periodontal ligament (PDL) exceedsan optimum level, it could lead to root resorption. Aims: To determine an apical stress incident on the maxillary central incisor during tooth movement with varying cemental and periodontal ligament thickness by Finite Element Method (FEM) modeling. Settings and Design: A three dimensional finite element model of a maxillary central incisor along with enamel, dentin, cementum, PDL and alveolar bone was recreated using EZIDCOM and AUTOCAD software. ALTAIR Hyper mesh 7.0 version was used to create the Finite Element meshwork of the tooth. This virtual model was transferred to Finite Element Analysis software, ANSYS where different tooth movements were performed. Materials and Methods: Cemental thickness at the root apex was varied from 200 μm to 1000 μm in increments of 200 μm. PDL thickness was varied as 0.24 mm and 0.15 mm. Intrusive, Extrusive, Rotation and Tipping forces were delivered to determine an apical stress for each set of parameters. Results: Results indicated that an apical stress induced in the cementum and PDL, increased with an increase in cementum and PDL thickness respectively. Apical stress induced in the cementum remained the same or decreased with an increase in the PDL thickness. Apical stress induced in the PDL decreased with an increase in the cementum thickness. Conclusion: The study concluded that the clinical delivery of an orthodontic forces will cause stress in the cementum and PDL. Hence, it is necessary to limit the orthodontic force to prevent root resorption.

Overjet and overbite analysis during the eruption of the upper permanent incisors / Análisis del traspase horizontal y vertical durante la erupción de los incisivos superiores permanentes

The purpose of this study was to analyze the overjet and overbite behavior during eruption of the upper permanent incisors.Fourth-eight plaster casts of 16 patients from ages 6-13 years were appraised longitudinally. It was found that the overjet remains constant, starting at the eruption of the upper permanent central incisors until eruption of the upper permanent canine teeth, while the overbite increases after eruption of theupper permanent lateral incisors and remains constant with the eruption of the canine teeth.

El objetivo del presente trabajo fue analizar el desenvolvimiento del traspase horizontal y vertical durante la erupción de los incisivos superiores permanentes. Se realizó un estudio de tipo longitudinal en cuarenta y ocho modelos de yeso de 16 pacientes con edades entre 6-13 años. Se encontró que el traspase horizontal permaneció constante al comienzo de la erupción de los incisivos centrales superiroes permanentes hasta la erupción de los caninos superiores; por otro lado, el traspase vertical aumentó después de la erupción de los incisivos laterales superiores y se mantuvo constante con la erupción de los caninos.

Stress distribution in the cervical region of an upper central incisor in a 3D finite element model

The aim of this study was to evaluate the stress distribution in the cervical region of a sound upper central incisor in two clinical situations, standard and maximum masticatory forces, by means of a 3D model with the highest possible level of fidelity to the anatomic dimensions. Two models with 331,887 linear tetrahedral elements that represent a sound upper central incisor with periodontal ligament, cortical and trabecular bones were loaded at 45º in relation to the tooth's long axis. All structures were considered to be homogeneous and isotropic, with the exception of the enamel (anisotropic). A standard masticatory force (100 N) was simulated on one of the models, while on the other one a maximum masticatory force was simulated (235.9 N). The software used were: PATRAN for pre- and post-processing and Nastran for processing. In the cementoenamel junction area, tensile forces reached 14.7 MPa in the 100 N model, and 40.2 MPa in the 235.9 N model, exceeding the enamel's tensile strength (16.7 MPa). The fact that the stress concentration in the amelodentinal junction exceeded the enamel's tensile strength under simulated conditions of maximum masticatory force suggests the possibility of the occurrence of non-carious cervical lesions such as abfractions.

Eruption age of permanent mandibular first molars and central incisors in the south Indian population.

OBJECTIVE: The existing eruption schedules for permanent and deciduous dentition are based on studies in the Western population. Since Indians differ from Westerners racially, genetically, and environmentally, these studies fail to provide relevant guidance on the eruption schedule in the Indian population. This study aims at determining the eruption pattern of permanent mandibular molars and central incisors in the south Indian population. MATERIALS AND METHODS: 10,156 apparently healthy Indian children in the age-group of 6-9 years were examined with mouth mirror and probe under adequate illumination for the status of the eruption of the permanent mandibular first molar and permanent mandibular central incisor. Pearson's Chi-square test with Yates' continuity correction was used to calculate the P -value for comparison of proportion between girls and boys. The values obtained in our study were compared with the standard values. The Z-test with continuity correction was used to calculate the P -value. RESULTS: As per our study, the permanent mandibular first molars and central incisors erupted one to two years later compared to the values reported in Westerners. The earlier eruption of the permanent mandibular first molars compared to the permanent mandibular central incisors, as well as the earlier eruption of both the teeth in girls compared to boys, were in accordance with the existing literature. CONCLUSION: The eruption age reported by us may form a standard reference for eruption age in Indians.

Etapas de maduración y erupción de incisivos y molares permanentes, en la dentición mixta / Maturation and eruption stages in permanent incisors and molars, in the mixed dentition

El objetivo de nuestro trabajo fue analizar la maduración de los primeros molares e incisivos centrales inferiores (ICI) permanentes y etapas de erupción de los primeros molares superiores e inferiores (1er MS, 1er MI) permanentes del lado izquierdo, en la dentición mixta temprana, en niños de ambos sexos. Materiales y métodos: se estudiaron 170 ortopantomografías de niños de 6 años +- 9 meses, divididos en: grupo 1 < de 6 años (n=78) y grupo II de 6 años o más (n=92). Resultados: los 1ros MI se encontraban en el estadio raíz casi completa en el grupo II: en varones 62,9 por ciento y en mujeres 71.9 por ciento. Los ICI en el grupo II mostraban dos tercios de la raíz completa en un 60 por ciento de varones y en un 43.9 por ciento de mujeres. Con respecto a la erupción del 1er MS en el grupo II en varones se encontraba erupcionado en un 40 por ciento y en un 45.6 por ciento en mujeres, mientras que el 1er MI en la misma etapa del grupo II en varones fue 37.1 por ciento y en mujeres fue 64.9 por ciento. Conclusiones: la maduración del molar inferior antecede a la de los incisivos inferiores permanentes. Las niñas presentan un porcentaje mayor de primeros molares erupcionados

Comparative evaluation of strength of various core restorative materials for endodontically treated anterior teeth.

In the present study, four restorative materials were used for the restoration of endodontically treated anterior teeth and their strength were compared with that of natural teeth. 100 freshly extracted Maxillary Central Incisors were used. The teeth were restored with Pin-retained amalgam-core buildups, Dowel-post with Glass ionomer-Amalgam alloy combination Cast Core build up. The natural tooth showed the maximum strength. Though some of the restorative materials showed promising results, none of them is able to show strength anywhere near to that of natural tooth.

Biofísica: principios de la mecánica del movimiento ortodóncico / Biophysics: principles of the orthodontic movement mechanics

Siguiendo al Dr. Mulligan, T. en su "mecánica del sentido común", se puede arribar a un mejor manejo de la aparatología ortodóncica, a través del conocimiento y aplicación de las leyes de la mecánica. El propósito de este artículo es mostrar el comportamiento de los alambres para arcos, según las distintas activaciones impuestas a los mismos

Estudo cefalométrico comparativo, de três tipos de ancoragem extrabucal, sobre as estruturas dentoesqueléticas, em pacientes com Classe II, 1ª divisäo / Comparative cephalometric study, of three types of extraoral anchorage, over the dentoskeletal structures, in patients with Class II, division 1 malocclusion

Esta pesquisa tem como objetivo estudar cefalometricamente, as estruturas dentoesqueléticas, em pacientes com Classe II, 1ª divisäo, comparando os tratamentos realizados com três tipos de ancoragem extrabucal. A amostra constou de telerradiografias de 75 jovens, de ambos os sexos, com idade média de 10 anos, divididos em três grupos: Grupo I - pacientes tratados com ancoragem extrabucal cervical (Kloehn); Grupo II - tratados com aparelho removível conjugado à ancoragem extrabucal; Grupo III - tratados com o ativador associado à ancoragem extrabucal. Após a análise estatística das medidas obtidas, no início e no final dos tratamentos ortodônticos, nos 3 grupos estudados, parece lógico concluir que: - quanto à influência do tratamento: - Näo ocorreram alteraçöes no padräo de crescimento nos três grupos...

Dentigerous cyst--an attempt to ascertain the normal eruption of involved tooth in child patient.

Dentigerous Cyst, in a young patient, located in the right palatal region, extending from 61 to 55, limited to the right side of mid-palatine suture and treated by marsupialization with post operative follow-up of 6 months has been reported. The involved permanent tooth (21) entrapped in the cyst was not extracted and found to erupt in normal direction.